karo: tx28: request gpio for acitivity LED and disable LED on failure

[karo-tx-uboot.git] / arch / arm / dts / uniphier-ph1-pro4-ref.dts

diff --git a/arch/arm/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/dts/uniphier-ph1-pro4-ref.dts
index b42c9c8098c7c796b1201e68409b482b96cf75dc..ec1117d4a248fe0940228a4e8ff5b961964e2c3e 100644 (file)
--- a/arch/arm/dts/uniphier-ph1-pro4-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-pro4-ref.dts
@@ -1,18 +1,18 @@
 /*
  * Device Tree Source for UniPhier PH1-Pro4 Reference Board
  *
- * Copyright (C) 2014 Panasonic Corporation
- *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
  *
- * SPDX-License-Identifier:    GPL-2.0+
+ * SPDX-License-Identifier:    GPL-2.0+        X11
  */
 
 /dts-v1/;
 /include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
 
 / {
-       model = "Panasonic UniPhier PH1-Pro4 Reference Board";
-       compatible = "panasonic,ph1-pro4-ref", "panasonic,ph1-pro4";
+       model = "UniPhier PH1-Pro4 Reference Board";
+       compatible = "socionext,ph1-pro4-ref", "socionext,ph1-pro4";
 
        memory {
                device_type = "memory";
@@ -20,15 +20,54 @@
        };
 
        chosen {
-               bootargs = "console=ttyPS0,115200 earlyprintk";
-               stdout-path = &uart0;
+               bootargs = "console=ttyS0,115200";
+               stdout-path = &serial0;
        };
+
+       aliases {
+               serial0 = &serial0;
+               serial1 = &serial1;
+               serial2 = &serial2;
+               serial3 = &serial3;
+               i2c0 = &i2c0;
+               i2c1 = &i2c1;
+               i2c2 = &i2c2;
+               i2c3 = &i2c3;
+               i2c5 = &i2c5;
+               i2c6 = &i2c6;
+               usb0 = &usb0;
+       };
+};
+
+&serial0 {
+       status = "okay";
+};
+
+&serial1 {
+       status = "okay";
+};
+
+&serial2 {
+       status = "okay";
+};
+
+&i2c0 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&usb2 {
+       status = "okay";
 };
 
-&uart0 {
-       status = "okay";
+&usb3 {
+       status = "okay";
 };
 
-&uart1 {
-       status = "okay";
+/* for U-boot only */
+&serial0 {
+       u-boot,dm-pre-reloc;
 };