net: fec: use correct sizes to clear and flush descriptors

[karo-tx-uboot.git] / board / bf533-stamp / bf533-stamp.c

diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c
index 4abad08cd9d9db8751859c742ec1740e40606332..585f5f14d422ab83d62a7bc93bb137005e565e71 100644 (file)
--- a/board/bf533-stamp/bf533-stamp.c
+++ b/board/bf533-stamp/bf533-stamp.c
@@ -6,29 +6,12 @@
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
 #include <netdev.h>
-#include <asm/io.h>
-#include "bf533-stamp.h"
+#include <asm/gpio.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -46,15 +29,10 @@ int checkboard(void)
  */
 void swap_to(int device_id)
 {
-       bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF1 | PF0);
-       SSYNC();
-       bfin_write_FIO_FLAG_C(PF1);
-       if (device_id == ETHERNET)
-               bfin_write_FIO_FLAG_S(PF0);
-       else if (device_id == FLASH)
-               bfin_write_FIO_FLAG_C(PF0);
-       else
-               printf("Unknown device to switch\n");
+       gpio_request(GPIO_PF0, "eth_flash_swap");
+       gpio_request(GPIO_PF1, "eth_flash_swap");
+       gpio_direction_output(GPIO_PF0, device_id == ETHERNET);
+       gpio_direction_output(GPIO_PF1, 0);
        SSYNC();
 }
 
@@ -75,56 +53,55 @@ int misc_init_r(void)
 #define STATUS_LED_OFF 0
 #define STATUS_LED_ON  1
 
+static int gpio_setup;
+
 static void stamp_led_set(int LED1, int LED2, int LED3)
 {
-       bfin_write_FIO_INEN(bfin_read_FIO_INEN() & ~(PF2 | PF3 | PF4));
-       bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (PF2 | PF3 | PF4));
-
-       if (LED1 == STATUS_LED_OFF)
-               *pFIO_FLAG_S = PF2;
-       else
-               *pFIO_FLAG_C = PF2;
-       if (LED2 == STATUS_LED_OFF)
-               *pFIO_FLAG_S = PF3;
-       else
-               *pFIO_FLAG_C = PF3;
-       if (LED3 == STATUS_LED_OFF)
-               *pFIO_FLAG_S = PF4;
-       else
-               *pFIO_FLAG_C = PF4;
-       SSYNC();
+       if (!gpio_setup) {
+               gpio_request(GPIO_PF2, "boot_progress");
+               gpio_request(GPIO_PF3, "boot_progress");
+               gpio_request(GPIO_PF4, "boot_progress");
+               gpio_direction_output(GPIO_PF2, LED1);
+               gpio_direction_output(GPIO_PF3, LED2);
+               gpio_direction_output(GPIO_PF4, LED3);
+               gpio_setup = 1;
+       } else {
+               gpio_set_value(GPIO_PF2, LED1);
+               gpio_set_value(GPIO_PF3, LED2);
+               gpio_set_value(GPIO_PF4, LED3);
+       }
 }
 
 void show_boot_progress(int status)
 {
        switch (status) {
-       case 1:
+       case BOOTSTAGE_ID_CHECK_MAGIC:
                stamp_led_set(STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_ON);
                break;
-       case 2:
+       case BOOTSTAGE_ID_CHECK_HEADER:
                stamp_led_set(STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_OFF);
                break;
-       case 3:
+       case BOOTSTAGE_ID_CHECK_CHECKSUM:
                stamp_led_set(STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_ON);
                break;
-       case 4:
+       case BOOTSTAGE_ID_CHECK_ARCH:
                stamp_led_set(STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_OFF);
                break;
-       case 5:
-       case 6:
+       case BOOTSTAGE_ID_CHECK_IMAGETYPE:
+       case BOOTSTAGE_ID_DECOMP_IMAGE:
                stamp_led_set(STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_ON);
                break;
-       case 7:
-       case 8:
+       case BOOTSTAGE_ID_KERNEL_LOADED:
+       case BOOTSTAGE_ID_CHECK_BOOT_OS:
                stamp_led_set(STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_OFF);
                break;
-       case 9:
-       case 10:
-       case 11:
-       case 12:
-       case 13:
-       case 14:
-       case 15:
+       case BOOTSTAGE_ID_BOOT_OS_RETURNED:
+       case BOOTSTAGE_ID_RD_MAGIC:
+       case BOOTSTAGE_ID_RD_HDR_CHECKSUM:
+       case BOOTSTAGE_ID_RD_CHECKSUM:
+       case BOOTSTAGE_ID_RAMDISK:
+       case BOOTSTAGE_ID_NO_RAMDISK:
+       case BOOTSTAGE_ID_RUN_OS:
                stamp_led_set(STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_OFF);
                break;
        default:
@@ -134,43 +111,6 @@ void show_boot_progress(int status)
 }
 #endif
 
-#ifdef CONFIG_STATUS_LED
-#include <status_led.h>
-
-static void set_led(int pf, int state)
-{
-       switch (state) {
-               case STATUS_LED_OFF:      bfin_write_FIO_FLAG_S(pf); break;
-               case STATUS_LED_BLINKING: bfin_write_FIO_FLAG_T(pf); break;
-               case STATUS_LED_ON:       bfin_write_FIO_FLAG_C(pf); break;
-       }
-}
-
-static void set_leds(led_id_t mask, int state)
-{
-       if (mask & 0x1) set_led(PF2, state);
-       if (mask & 0x2) set_led(PF3, state);
-       if (mask & 0x4) set_led(PF4, state);
-}
-
-void __led_init(led_id_t mask, int state)
-{
-       bfin_write_FIO_INEN(bfin_read_FIO_INEN() & ~(PF2 | PF3 | PF4));
-       bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (PF2 | PF3 | PF4));
-}
-
-void __led_set(led_id_t mask, int state)
-{
-       set_leds(mask, state);
-}
-
-void __led_toggle(led_id_t mask)
-{
-       set_leds(mask, STATUS_LED_BLINKING);
-}
-
-#endif
-
 #ifdef CONFIG_SMC91111
 int board_eth_init(bd_t *bis)
 {