Merge remote-tracking branch 'u-boot-imx/master'

[karo-tx-uboot.git] / board / freescale / mx35pdk / mx35pdk.c

diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index cce712354f53fd64b61dd243ad88be8d69e240d6..7cb6b3086f1d79088aeb3531fc6c0acda83cae9c 100644 (file)
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -32,6 +32,8 @@
 #include <i2c.h>
 #include <pmic.h>
 #include <fsl_pmic.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
 #include <mc9sdz60.h>
 #include <mc13892.h>
 #include <linux/types.h>
@@ -168,7 +170,7 @@ int board_early_init_f(void)
        /* enable clocks */
        writel(readl(&ccm->cgr0) |
                MXC_CCM_CGR0_EMI_MASK |
-               MXC_CCM_CGR0_EDI0_MASK |
+               MXC_CCM_CGR0_EDIO_MASK |
                MXC_CCM_CGR0_EPIT1_MASK,
                &ccm->cgr0);
 
@@ -258,17 +260,6 @@ int board_late_init(void)
        val |= 0x80;
        mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val);
 
-       return 0;
-}
-
-int checkboard(void)
-{
-       /*
-        * Be sure that I2C is initialized to check
-        * the board revision
-        */
-       i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
        /* Print board revision */
        printf("Board: MX35 PDK %d.0\n", ((get_board_rev() >> 8) + 1) & 0x0F);
 
@@ -286,3 +277,26 @@ int board_eth_init(bd_t *bis)
 
        return rc;
 }
+
+#if defined(CONFIG_FSL_ESDHC)
+
+struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR};
+
+int board_mmc_init(bd_t *bis)
+{
+       /* configure pins for SDHC1 only */
+       mxc_request_iomux(MX35_PIN_SD1_CMD, MUX_CONFIG_FUNC);
+       mxc_request_iomux(MX35_PIN_SD1_CLK, MUX_CONFIG_FUNC);
+       mxc_request_iomux(MX35_PIN_SD1_DATA0, MUX_CONFIG_FUNC);
+       mxc_request_iomux(MX35_PIN_SD1_DATA1, MUX_CONFIG_FUNC);
+       mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC);
+       mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC);
+
+       return fsl_esdhc_initialize(bis, &esdhc_cfg);
+}
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+       return !(mc9sdz60_reg_read(MC9SDZ60_REG_DES_FLAG) & 0x4);
+}
+#endif