ARMV7: OMAP: Configure Overo's second network chip

[karo-tx-uboot.git] / board / overo / overo.h

diff --git a/board/overo/overo.h b/board/overo/overo.h
index 4c7ac27fa6818d4f474bc42330134fd0a5520a37..2744ffee6986861dedd472b5adc7c083d1036787 100644 (file)
--- a/board/overo/overo.h
+++ b/board/overo/overo.h
@@ -33,6 +33,15 @@ const omap3_sysinfo sysinfo = {
 #endif
 };
 
+/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
+#define NET_LAN9221_GPMC_CONFIG1    0x00001000
+#define NET_LAN9221_GPMC_CONFIG2    0x00080701
+#define NET_LAN9221_GPMC_CONFIG3    0x00020201
+#define NET_LAN9221_GPMC_CONFIG4    0x08030703
+#define NET_LAN9221_GPMC_CONFIG5    0x00060908
+#define NET_LAN9221_GPMC_CONFIG6    0x87030000
+#define NET_LAN9221_GPMC_CONFIG7    0x00000f6c
+
 /*
  * IEN  - Input Enable
  * IDIS - Input Disable
@@ -129,7 +138,7 @@ const omap3_sysinfo sysinfo = {
        MUX_VAL(CP(GPMC_WAIT1),         (IEN  | PTU | EN  | M0)) /*GPMC_WAIT1*/\
        MUX_VAL(CP(GPMC_WAIT2),         (IEN  | PTU | EN  | M4)) /*GPIO_64*/\
                                                                 /* - SMSC911X_NRES*/\
-       MUX_VAL(CP(GPMC_WAIT3),         (IEN  | PTU | EN  | M0)) /*GPMC_nCS3*/\
+       MUX_VAL(CP(GPMC_WAIT3),         (IEN  | PTU | DIS | M4)) /*GPIO_65*/\
  /*DSS*/\
        MUX_VAL(CP(DSS_PCLK),           (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
        MUX_VAL(CP(DSS_HSYNC),          (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
@@ -180,18 +189,18 @@ const omap3_sysinfo sysinfo = {
        MUX_VAL(CP(CAM_XCLKB),          (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
        MUX_VAL(CP(CAM_WEN),            (IEN  | PTD | DIS | M0)) /*CAM_WEN*/\
        MUX_VAL(CP(CAM_STROBE),         (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
-       MUX_VAL(CP(CSI2_DX0),           (IEN  | PTD | DIS | M0)) /*CSI2_DX0*/\
-       MUX_VAL(CP(CSI2_DY0),           (IEN  | PTD | DIS | M0)) /*CSI2_DY0*/\
+       MUX_VAL(CP(CSI2_DX0),           (IEN  | PTD | EN  | M4)) /*GPIO_112*/\
+       MUX_VAL(CP(CSI2_DY0),           (IEN  | PTD | EN  | M4)) /*GPIO_113*/\
        MUX_VAL(CP(CSI2_DX1),           (IEN  | PTD | EN  | M4)) /*GPIO_114*/\
                                                                 /* - PEN_DOWN*/\
-       MUX_VAL(CP(CSI2_DY1),           (IEN  | PTU | EN  | M4)) /*GPIO_115*/\
+       MUX_VAL(CP(CSI2_DY1),           (IEN  | PTD | EN  | M4)) /*GPIO_115*/\
  /*Audio Interface */\
        MUX_VAL(CP(MCBSP2_FSX),         (IEN  | PTD | DIS | M0)) /*McBSP2_FSX*/\
        MUX_VAL(CP(MCBSP2_CLKX),        (IEN  | PTD | DIS | M0)) /*McBSP2_CLKX*/\
        MUX_VAL(CP(MCBSP2_DR),          (IEN  | PTD | DIS | M0)) /*McBSP2_DR*/\
        MUX_VAL(CP(MCBSP2_DX),          (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
  /*Expansion card */\
-       MUX_VAL(CP(MMC1_CLK),           (IDIS | PTU | EN  | M0)) /*MMC1_CLK*/\
+       MUX_VAL(CP(MMC1_CLK),           (IEN  | PTU | EN  | M0)) /*MMC1_CLK*/\
        MUX_VAL(CP(MMC1_CMD),           (IEN  | PTU | EN  | M0)) /*MMC1_CMD*/\
        MUX_VAL(CP(MMC1_DAT0),          (IEN  | PTU | EN  | M0)) /*MMC1_DAT0*/\
        MUX_VAL(CP(MMC1_DAT1),          (IEN  | PTU | EN  | M0)) /*MMC1_DAT1*/\
@@ -292,7 +301,7 @@ const omap3_sysinfo sysinfo = {
        MUX_VAL(CP(SYS_OFF_MODE),       (IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
        MUX_VAL(CP(SYS_CLKOUT1),        (IEN  | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
        MUX_VAL(CP(SYS_CLKOUT2),        (IEN  | PTU | EN  | M4)) /*GPIO_186*/\
-       MUX_VAL(CP(ETK_CLK_ES2),        (IDIS | PTU | EN  | M2)) /*MMC3_CLK*/\
+       MUX_VAL(CP(ETK_CLK_ES2),        (IEN  | PTU | EN  | M2)) /*MMC3_CLK*/\
        MUX_VAL(CP(ETK_CTL_ES2),        (IEN  | PTU | EN  | M2)) /*MMC3_CMD*/\
        MUX_VAL(CP(ETK_D0_ES2),         (IEN  | PTU | EN  | M4)) /*GPIO_14*/\
        MUX_VAL(CP(ETK_D1_ES2),         (IEN  | PTD | EN  | M4)) /*GPIO_15 - X_GATE*/\