* (C) Copyright 2007
* Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
* Convenience function to find a node and return it's property or a
* default value if it doesn't exist.
*/
-u32 fdt_getprop_u32_default(void *fdt, const char *path, const char *prop,
- const u32 dflt)
+u32 fdt_getprop_u32_default(const void *fdt, const char *path,
+ const char *prop, const u32 dflt)
{
const u32 *val;
int off;
val = fdt_getprop(fdt, off, prop, NULL);
if (val)
- return *val;
+ return fdt32_to_cpu(*val);
else
return dflt;
}
}
}
- err = fdt_add_mem_rsv(fdt, initrd_start, initrd_end - initrd_start + 1);
+ err = fdt_add_mem_rsv(fdt, initrd_start, initrd_end - initrd_start);
if (err < 0) {
printf("fdt_initrd: %s\n", fdt_strerror(err));
return err;
do_fixup_by_compat(fdt, compat, prop, &val, 4, create);
}
-int fdt_fixup_memory(void *blob, u64 start, u64 size)
+/*
+ * Get cells len in bytes
+ * if #NNNN-cells property is 2 then len is 8
+ * otherwise len is 4
+ */
+static int get_cells_len(void *blob, char *nr_cells_name)
+{
+ const u32 *cell;
+
+ cell = fdt_getprop(blob, 0, nr_cells_name, NULL);
+ if (cell && fdt32_to_cpu(*cell) == 2)
+ return 8;
+
+ return 4;
+}
+
+/*
+ * Write a 4 or 8 byte big endian cell
+ */
+static void write_cell(u8 *addr, u64 val, int size)
+{
+ int shift = (size - 1) * 8;
+ while (size-- > 0) {
+ *addr++ = (val >> shift) & 0xff;
+ shift -= 8;
+ }
+}
+
+int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks)
{
- int err, nodeoffset, len = 0;
- u8 tmp[16];
- const u32 *addrcell, *sizecell;
+ int err, nodeoffset;
+ int addr_cell_len, size_cell_len, len;
+ u8 tmp[banks * 16]; /* Up to 64-bit address + 64-bit size */
+ int bank;
err = fdt_check_header(blob);
if (err < 0) {
return err;
}
- addrcell = fdt_getprop(blob, 0, "#address-cells", NULL);
- /* use shifts and mask to ensure endianness */
- if ((addrcell) && (*addrcell == 2)) {
- tmp[0] = (start >> 56) & 0xff;
- tmp[1] = (start >> 48) & 0xff;
- tmp[2] = (start >> 40) & 0xff;
- tmp[3] = (start >> 32) & 0xff;
- tmp[4] = (start >> 24) & 0xff;
- tmp[5] = (start >> 16) & 0xff;
- tmp[6] = (start >> 8) & 0xff;
- tmp[7] = (start ) & 0xff;
- len = 8;
- } else {
- tmp[0] = (start >> 24) & 0xff;
- tmp[1] = (start >> 16) & 0xff;
- tmp[2] = (start >> 8) & 0xff;
- tmp[3] = (start ) & 0xff;
- len = 4;
- }
-
- sizecell = fdt_getprop(blob, 0, "#size-cells", NULL);
- /* use shifts and mask to ensure endianness */
- if ((sizecell) && (*sizecell == 2)) {
- tmp[0+len] = (size >> 56) & 0xff;
- tmp[1+len] = (size >> 48) & 0xff;
- tmp[2+len] = (size >> 40) & 0xff;
- tmp[3+len] = (size >> 32) & 0xff;
- tmp[4+len] = (size >> 24) & 0xff;
- tmp[5+len] = (size >> 16) & 0xff;
- tmp[6+len] = (size >> 8) & 0xff;
- tmp[7+len] = (size ) & 0xff;
- len += 8;
- } else {
- tmp[0+len] = (size >> 24) & 0xff;
- tmp[1+len] = (size >> 16) & 0xff;
- tmp[2+len] = (size >> 8) & 0xff;
- tmp[3+len] = (size ) & 0xff;
- len += 4;
+ addr_cell_len = get_cells_len(blob, "#address-cells");
+ size_cell_len = get_cells_len(blob, "#size-cells");
+
+ for (bank = 0, len = 0; bank < banks; bank++) {
+ write_cell(tmp + len, start[bank], addr_cell_len);
+ len += addr_cell_len;
+
+ write_cell(tmp + len, size[bank], size_cell_len);
+ len += size_cell_len;
}
err = fdt_setprop(blob, nodeoffset, "reg", tmp, len);
return 0;
}
+int fdt_fixup_memory(void *blob, u64 start, u64 size)
+{
+ return fdt_fixup_memory_banks(blob, &start, &size, 1);
+}
+
void fdt_fixup_ethernet(void *fdt)
{
int node, i, j;
total = fdt_num_mem_rsv(blob);
for (i = 0; i < total; i++) {
fdt_get_mem_rsv(blob, i, &addr, &size);
- if (addr == (uint64_t)(u32)blob) {
+ if (addr == (uintptr_t)blob) {
fdt_del_mem_rsv(blob, i);
break;
}
/*
* Calculate the actual size of the fdt
- * plus the size needed for two fdt_add_mem_rsv, one
- * for the fdt itself and one for a possible initrd
+ * plus the size needed for 5 fdt_add_mem_rsv, one
+ * for the fdt itself and 4 for a possible initrd
+ * ((initrd-start + initrd-end) * 2 (name & value))
*/
actualsize = fdt_off_dt_strings(blob) +
- fdt_size_dt_strings(blob) + 2*sizeof(struct fdt_reserve_entry);
+ fdt_size_dt_strings(blob) + 5 * sizeof(struct fdt_reserve_entry);
/* Make it so the fdt ends on a page boundary */
- actualsize = ALIGN(actualsize + ((uint)blob & 0xfff), 0x1000);
- actualsize = actualsize - ((uint)blob & 0xfff);
+ actualsize = ALIGN(actualsize + ((uintptr_t)blob & 0xfff), 0x1000);
+ actualsize = actualsize - ((uintptr_t)blob & 0xfff);
/* Change the fdt header to reflect the correct size */
fdt_set_totalsize(blob, actualsize);
/* Add the new reservation */
- ret = fdt_add_mem_rsv(blob, (uint)blob, actualsize);
+ ret = fdt_add_mem_rsv(blob, (uintptr_t)blob, actualsize);
if (ret < 0)
return ret;
#endif
#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
+/*
+ * Provide a weak default function to return the flash bank size.
+ * There might be multiple non-identical flash chips connected to one
+ * chip-select, so we need to pass an index as well.
+ */
+u32 __flash_get_bank_size(int cs, int idx)
+{
+ extern flash_info_t flash_info[];
+
+ /*
+ * As default, a simple 1:1 mapping is provided. Boards with
+ * a different mapping need to supply a board specific mapping
+ * routine.
+ */
+ return flash_info[cs].size;
+}
+u32 flash_get_bank_size(int cs, int idx)
+ __attribute__((weak, alias("__flash_get_bank_size")));
+
/*
* This function can be used to update the size in the "reg" property
- * of the NOR FLASH device nodes. This is necessary for boards with
+ * of all NOR FLASH device nodes. This is necessary for boards with
* non-fixed NOR FLASH sizes.
*/
-int fdt_fixup_nor_flash_size(void *blob, int cs, u32 size)
+int fdt_fixup_nor_flash_size(void *blob)
{
char compat[][16] = { "cfi-flash", "jedec-flash" };
int off;
int len;
struct fdt_property *prop;
- u32 *reg;
+ u32 *reg, *reg2;
int i;
for (i = 0; i < 2; i++) {
off = fdt_node_offset_by_compatible(blob, -1, compat[i]);
while (off != -FDT_ERR_NOTFOUND) {
+ int idx;
+
/*
- * Found one compatible node, now check if this one
- * has the correct CS
+ * Found one compatible node, so fixup the size
+ * int its reg properties
*/
prop = fdt_get_property_w(blob, off, "reg", &len);
if (prop) {
- reg = (u32 *)&prop->data[0];
- if (reg[0] == cs) {
- reg[2] = size;
- fdt_setprop(blob, off, "reg", reg,
- 3 * sizeof(u32));
-
- return 0;
+ int tuple_size = 3 * sizeof(reg);
+
+ /*
+ * There might be multiple reg-tuples,
+ * so loop through them all
+ */
+ reg = reg2 = (u32 *)&prop->data[0];
+ for (idx = 0; idx < (len / tuple_size); idx++) {
+ /*
+ * Update size in reg property
+ */
+ reg[2] = flash_get_bank_size(reg[0],
+ idx);
+
+ /*
+ * Point to next reg tuple
+ */
+ reg += 3;
}
+
+ fdt_setprop(blob, off, "reg", reg2, len);
}
/* Move to next compatible node */
}
}
- return -1;
+ return 0;
}
#endif
+int fdt_increase_size(void *fdt, int add_len)
+{
+ int newlen;
+
+ newlen = fdt_totalsize(fdt) + add_len;
+
+ /* Open in place with a new len */
+ return fdt_open_into(fdt, fdt, newlen);
+}
+
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
#include <jffs2/load_kernel.h>
#include <mtd_node.h>
return 0;
}
-int fdt_increase_size(void *fdt, int add_len)
-{
- int newlen;
-
- newlen = fdt_totalsize(fdt) + add_len;
-
- /* Open in place with a new len */
- return fdt_open_into(fdt, fdt, newlen);
-}
-
int fdt_del_partitions(void *blob, int parent_offset)
{
const void *prop;
off = fdt_path_offset(blob, "/aliases");
fdt_delprop(blob, off, alias);
}
+
+/* Helper to read a big number; size is in cells (not bytes) */
+static inline u64 of_read_number(const __be32 *cell, int size)
+{
+ u64 r = 0;
+ while (size--)
+ r = (r << 32) | be32_to_cpu(*(cell++));
+ return r;
+}
+
+#define PRu64 "%llx"
+
+/* Max address size we deal with */
+#define OF_MAX_ADDR_CELLS 4
+#define OF_BAD_ADDR ((u64)-1)
+#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
+ (ns) > 0)
+
+/* Debug utility */
+#ifdef DEBUG
+static void of_dump_addr(const char *s, const u32 *addr, int na)
+{
+ printf("%s", s);
+ while(na--)
+ printf(" %08x", *(addr++));
+ printf("\n");
+}
+#else
+static void of_dump_addr(const char *s, const u32 *addr, int na) { }
+#endif
+
+/* Callbacks for bus specific translators */
+struct of_bus {
+ const char *name;
+ const char *addresses;
+ void (*count_cells)(void *blob, int parentoffset,
+ int *addrc, int *sizec);
+ u64 (*map)(u32 *addr, const u32 *range,
+ int na, int ns, int pna);
+ int (*translate)(u32 *addr, u64 offset, int na);
+};
+
+/* Default translator (generic bus) */
+static void of_bus_default_count_cells(void *blob, int parentoffset,
+ int *addrc, int *sizec)
+{
+ const u32 *prop;
+
+ if (addrc) {
+ prop = fdt_getprop(blob, parentoffset, "#address-cells", NULL);
+ if (prop)
+ *addrc = be32_to_cpup((u32 *)prop);
+ else
+ *addrc = 2;
+ }
+
+ if (sizec) {
+ prop = fdt_getprop(blob, parentoffset, "#size-cells", NULL);
+ if (prop)
+ *sizec = be32_to_cpup((u32 *)prop);
+ else
+ *sizec = 1;
+ }
+}
+
+static u64 of_bus_default_map(u32 *addr, const u32 *range,
+ int na, int ns, int pna)
+{
+ u64 cp, s, da;
+
+ cp = of_read_number(range, na);
+ s = of_read_number(range + na + pna, ns);
+ da = of_read_number(addr, na);
+
+ debug("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n",
+ cp, s, da);
+
+ if (da < cp || da >= (cp + s))
+ return OF_BAD_ADDR;
+ return da - cp;
+}
+
+static int of_bus_default_translate(u32 *addr, u64 offset, int na)
+{
+ u64 a = of_read_number(addr, na);
+ memset(addr, 0, na * 4);
+ a += offset;
+ if (na > 1)
+ addr[na - 2] = a >> 32;
+ addr[na - 1] = a & 0xffffffffu;
+
+ return 0;
+}
+
+/* Array of bus specific translators */
+static struct of_bus of_busses[] = {
+ /* Default */
+ {
+ .name = "default",
+ .addresses = "reg",
+ .count_cells = of_bus_default_count_cells,
+ .map = of_bus_default_map,
+ .translate = of_bus_default_translate,
+ },
+};
+
+static int of_translate_one(void * blob, int parent, struct of_bus *bus,
+ struct of_bus *pbus, u32 *addr,
+ int na, int ns, int pna, const char *rprop)
+{
+ const u32 *ranges;
+ int rlen;
+ int rone;
+ u64 offset = OF_BAD_ADDR;
+
+ /* Normally, an absence of a "ranges" property means we are
+ * crossing a non-translatable boundary, and thus the addresses
+ * below the current not cannot be converted to CPU physical ones.
+ * Unfortunately, while this is very clear in the spec, it's not
+ * what Apple understood, and they do have things like /uni-n or
+ * /ht nodes with no "ranges" property and a lot of perfectly
+ * useable mapped devices below them. Thus we treat the absence of
+ * "ranges" as equivalent to an empty "ranges" property which means
+ * a 1:1 translation at that level. It's up to the caller not to try
+ * to translate addresses that aren't supposed to be translated in
+ * the first place. --BenH.
+ */
+ ranges = (u32 *)fdt_getprop(blob, parent, rprop, &rlen);
+ if (ranges == NULL || rlen == 0) {
+ offset = of_read_number(addr, na);
+ memset(addr, 0, pna * 4);
+ debug("OF: no ranges, 1:1 translation\n");
+ goto finish;
+ }
+
+ debug("OF: walking ranges...\n");
+
+ /* Now walk through the ranges */
+ rlen /= 4;
+ rone = na + pna + ns;
+ for (; rlen >= rone; rlen -= rone, ranges += rone) {
+ offset = bus->map(addr, ranges, na, ns, pna);
+ if (offset != OF_BAD_ADDR)
+ break;
+ }
+ if (offset == OF_BAD_ADDR) {
+ debug("OF: not found !\n");
+ return 1;
+ }
+ memcpy(addr, ranges + na, 4 * pna);
+
+ finish:
+ of_dump_addr("OF: parent translation for:", addr, pna);
+ debug("OF: with offset: "PRu64"\n", offset);
+
+ /* Translate it into parent bus space */
+ return pbus->translate(addr, offset, pna);
+}
+
+/*
+ * Translate an address from the device-tree into a CPU physical address,
+ * this walks up the tree and applies the various bus mappings on the
+ * way.
+ *
+ * Note: We consider that crossing any level with #size-cells == 0 to mean
+ * that translation is impossible (that is we are not dealing with a value
+ * that can be mapped to a cpu physical address). This is not really specified
+ * that way, but this is traditionally the way IBM at least do things
+ */
+u64 __of_translate_address(void *blob, int node_offset, const u32 *in_addr,
+ const char *rprop)
+{
+ int parent;
+ struct of_bus *bus, *pbus;
+ u32 addr[OF_MAX_ADDR_CELLS];
+ int na, ns, pna, pns;
+ u64 result = OF_BAD_ADDR;
+
+ debug("OF: ** translation for device %s **\n",
+ fdt_get_name(blob, node_offset, NULL));
+
+ /* Get parent & match bus type */
+ parent = fdt_parent_offset(blob, node_offset);
+ if (parent < 0)
+ goto bail;
+ bus = &of_busses[0];
+
+ /* Cound address cells & copy address locally */
+ bus->count_cells(blob, parent, &na, &ns);
+ if (!OF_CHECK_COUNTS(na, ns)) {
+ printf("%s: Bad cell count for %s\n", __FUNCTION__,
+ fdt_get_name(blob, node_offset, NULL));
+ goto bail;
+ }
+ memcpy(addr, in_addr, na * 4);
+
+ debug("OF: bus is %s (na=%d, ns=%d) on %s\n",
+ bus->name, na, ns, fdt_get_name(blob, parent, NULL));
+ of_dump_addr("OF: translating address:", addr, na);
+
+ /* Translate */
+ for (;;) {
+ /* Switch to parent bus */
+ node_offset = parent;
+ parent = fdt_parent_offset(blob, node_offset);
+
+ /* If root, we have finished */
+ if (parent < 0) {
+ debug("OF: reached root node\n");
+ result = of_read_number(addr, na);
+ break;
+ }
+
+ /* Get new parent bus and counts */
+ pbus = &of_busses[0];
+ pbus->count_cells(blob, parent, &pna, &pns);
+ if (!OF_CHECK_COUNTS(pna, pns)) {
+ printf("%s: Bad cell count for %s\n", __FUNCTION__,
+ fdt_get_name(blob, node_offset, NULL));
+ break;
+ }
+
+ debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n",
+ pbus->name, pna, pns, fdt_get_name(blob, parent, NULL));
+
+ /* Apply bus translation */
+ if (of_translate_one(blob, node_offset, bus, pbus,
+ addr, na, ns, pna, rprop))
+ break;
+
+ /* Complete the move up one level */
+ na = pna;
+ ns = pns;
+ bus = pbus;
+
+ of_dump_addr("OF: one level translation:", addr, na);
+ }
+ bail:
+
+ return result;
+}
+
+u64 fdt_translate_address(void *blob, int node_offset, const u32 *in_addr)
+{
+ return __of_translate_address(blob, node_offset, in_addr, "ranges");
+}
+
+/**
+ * fdt_node_offset_by_compat_reg: Find a node that matches compatiable and
+ * who's reg property matches a physical cpu address
+ *
+ * @blob: ptr to device tree
+ * @compat: compatiable string to match
+ * @compat_off: property name
+ *
+ */
+int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
+ phys_addr_t compat_off)
+{
+ int len, off = fdt_node_offset_by_compatible(blob, -1, compat);
+ while (off != -FDT_ERR_NOTFOUND) {
+ u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len);
+ if (reg) {
+ if (compat_off == fdt_translate_address(blob, off, reg))
+ return off;
+ }
+ off = fdt_node_offset_by_compatible(blob, off, compat);
+ }
+
+ return -FDT_ERR_NOTFOUND;
+}
+
+/**
+ * fdt_alloc_phandle: Return next free phandle value
+ *
+ * @blob: ptr to device tree
+ */
+int fdt_alloc_phandle(void *blob)
+{
+ int offset, phandle = 0;
+
+ for (offset = fdt_next_node(blob, -1, NULL); offset >= 0;
+ offset = fdt_next_node(blob, offset, NULL)) {
+ phandle = max(phandle, fdt_get_phandle(blob, offset));
+ }
+
+ return phandle + 1;
+}
+
+/*
+ * fdt_set_phandle: Create a phandle property for the given node
+ *
+ * @fdt: ptr to device tree
+ * @nodeoffset: node to update
+ * @phandle: phandle value to set (must be unique)
+ */
+int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle)
+{
+ int ret;
+
+#ifdef DEBUG
+ int off = fdt_node_offset_by_phandle(fdt, phandle);
+
+ if ((off >= 0) && (off != nodeoffset)) {
+ char buf[64];
+
+ fdt_get_path(fdt, nodeoffset, buf, sizeof(buf));
+ printf("Trying to update node %s with phandle %u ",
+ buf, phandle);
+
+ fdt_get_path(fdt, off, buf, sizeof(buf));
+ printf("that already exists in node %s.\n", buf);
+ return -FDT_ERR_BADPHANDLE;
+ }
+#endif
+
+ ret = fdt_setprop_cell(fdt, nodeoffset, "phandle", phandle);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * For now, also set the deprecated "linux,phandle" property, so that we
+ * don't break older kernels.
+ */
+ ret = fdt_setprop_cell(fdt, nodeoffset, "linux,phandle", phandle);
+
+ return ret;
+}
+
+/*
+ * fdt_create_phandle: Create a phandle property for the given node
+ *
+ * @fdt: ptr to device tree
+ * @nodeoffset: node to update
+ */
+unsigned int fdt_create_phandle(void *fdt, int nodeoffset)
+{
+ /* see if there is a phandle already */
+ int phandle = fdt_get_phandle(fdt, nodeoffset);
+
+ /* if we got 0, means no phandle so create one */
+ if (phandle == 0) {
+ int ret;
+
+ phandle = fdt_alloc_phandle(fdt);
+ ret = fdt_set_phandle(fdt, nodeoffset, phandle);
+ if (ret < 0) {
+ printf("Can't set phandle %u: %s\n", phandle,
+ fdt_strerror(ret));
+ return 0;
+ }
+ }
+
+ return phandle;
+}
+
+/*
+ * fdt_set_node_status: Set status for the given node
+ *
+ * @fdt: ptr to device tree
+ * @nodeoffset: node to update
+ * @status: FDT_STATUS_OKAY, FDT_STATUS_DISABLED,
+ * FDT_STATUS_FAIL, FDT_STATUS_FAIL_ERROR_CODE
+ * @error_code: optional, only used if status is FDT_STATUS_FAIL_ERROR_CODE
+ */
+int fdt_set_node_status(void *fdt, int nodeoffset,
+ enum fdt_status status, unsigned int error_code)
+{
+ char buf[16];
+ int ret = 0;
+
+ if (nodeoffset < 0)
+ return nodeoffset;
+
+ switch (status) {
+ case FDT_STATUS_OKAY:
+ ret = fdt_setprop_string(fdt, nodeoffset, "status", "okay");
+ break;
+ case FDT_STATUS_DISABLED:
+ ret = fdt_setprop_string(fdt, nodeoffset, "status", "disabled");
+ break;
+ case FDT_STATUS_FAIL:
+ ret = fdt_setprop_string(fdt, nodeoffset, "status", "fail");
+ break;
+ case FDT_STATUS_FAIL_ERROR_CODE:
+ sprintf(buf, "fail-%d", error_code);
+ ret = fdt_setprop_string(fdt, nodeoffset, "status", buf);
+ break;
+ default:
+ printf("Invalid fdt status: %x\n", status);
+ ret = -1;
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * fdt_set_status_by_alias: Set status for the given node given an alias
+ *
+ * @fdt: ptr to device tree
+ * @alias: alias of node to update
+ * @status: FDT_STATUS_OKAY, FDT_STATUS_DISABLED,
+ * FDT_STATUS_FAIL, FDT_STATUS_FAIL_ERROR_CODE
+ * @error_code: optional, only used if status is FDT_STATUS_FAIL_ERROR_CODE
+ */
+int fdt_set_status_by_alias(void *fdt, const char* alias,
+ enum fdt_status status, unsigned int error_code)
+{
+ int offset = fdt_path_offset(fdt, alias);
+
+ return fdt_set_node_status(fdt, offset, status, error_code);
+}
+
+#if defined(CONFIG_VIDEO)
+int fdt_add_edid(void *blob, const char *compat, unsigned char *edid_buf)
+{
+ int noff;
+ int ret;
+
+ noff = fdt_node_offset_by_compatible(blob, -1, compat);
+ if (noff != -FDT_ERR_NOTFOUND) {
+ debug("%s: %s\n", fdt_get_name(blob, noff, 0), compat);
+add_edid:
+ ret = fdt_setprop(blob, noff, "edid", edid_buf, 128);
+ if (ret == -FDT_ERR_NOSPACE) {
+ ret = fdt_increase_size(blob, 512);
+ if (!ret)
+ goto add_edid;
+ else
+ goto err_size;
+ } else if (ret < 0) {
+ printf("Can't add property: %s\n", fdt_strerror(ret));
+ return ret;
+ }
+ }
+ return 0;
+err_size:
+ printf("Can't increase blob size: %s\n", fdt_strerror(ret));
+ return ret;
+}
+#endif
+
+/*
+ * Verify the physical address of device tree node for a given alias
+ *
+ * This function locates the device tree node of a given alias, and then
+ * verifies that the physical address of that device matches the given
+ * parameter. It displays a message if there is a mismatch.
+ *
+ * Returns 1 on success, 0 on failure
+ */
+int fdt_verify_alias_address(void *fdt, int anode, const char *alias, u64 addr)
+{
+ const char *path;
+ const u32 *reg;
+ int node, len;
+ u64 dt_addr;
+
+ path = fdt_getprop(fdt, anode, alias, NULL);
+ if (!path) {
+ /* If there's no such alias, then it's not a failure */
+ return 1;
+ }
+
+ node = fdt_path_offset(fdt, path);
+ if (node < 0) {
+ printf("Warning: device tree alias '%s' points to invalid "
+ "node %s.\n", alias, path);
+ return 0;
+ }
+
+ reg = fdt_getprop(fdt, node, "reg", &len);
+ if (!reg) {
+ printf("Warning: device tree node '%s' has no address.\n",
+ path);
+ return 0;
+ }
+
+ dt_addr = fdt_translate_address(fdt, node, reg);
+ if (addr != dt_addr) {
+ printf("Warning: U-Boot configured device %s at address %llx,\n"
+ " but the device tree has it address %llx.\n",
+ alias, addr, dt_addr);
+ return 0;
+ }
+
+ return 1;
+}
+
+/*
+ * Returns the base address of an SOC or PCI node
+ */
+u64 fdt_get_base_address(void *fdt, int node)
+{
+ int size;
+ u32 naddr;
+ const u32 *prop;
+
+ prop = fdt_getprop(fdt, node, "#address-cells", &size);
+ if (prop && size == 4)
+ naddr = *prop;
+ else
+ naddr = 2;
+
+ prop = fdt_getprop(fdt, node, "ranges", &size);
+
+ return prop ? fdt_translate_address(fdt, node, prop + naddr) : 0;
+}
projects / karo-tx-uboot.git / blobdiff