imx: remove duplicated prototype for fecmxc_initialize() which is already defined...

[karo-tx-uboot.git] / drivers / pci / fsl_pci_init.c

diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 231b07573f5b15a35c472bbf8c6cfcb124166412..52792dcd5973895582220de9fc81fccacc1b4277 100644 (file)
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -444,6 +444,21 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
                        ltssm = (in_be32(&pci->pex_csr0)
                                & PEX_CSR0_LTSSM_MASK) >> PEX_CSR0_LTSSM_SHIFT;
                        enabled = (ltssm == 0x11) ? 1 : 0;
+#ifdef CONFIG_FSL_PCIE_RESET
+                       int i;
+                       /* assert PCIe reset */
+                       setbits_be32(&pci->pdb_stat, 0x08000000);
+                       (void) in_be32(&pci->pdb_stat);
+                       udelay(1000);
+                       /* clear PCIe reset */
+                       clrbits_be32(&pci->pdb_stat, 0x08000000);
+                       asm("sync;isync");
+                       for (i = 0; i < 100 && ltssm < PCI_LTSSM_L0; i++) {
+                               pci_hose_read_config_word(hose, dev, PCI_LTSSM,
+                                                         &ltssm);
+                               udelay(1000);
+                       }
+#endif
                } else {
                /* pci_hose_read_config_word(hose, dev, PCI_LTSSM, &ltssm); */
                /* enabled = ltssm >= PCI_LTSSM_L0; */
@@ -682,8 +697,14 @@ void fsl_pci_config_unlock(struct pci_controller *hose)
        pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP);
        pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap);
        if (pcie_cap != 0x0) {
+               ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)hose->cfg_addr;
+               u32 block_rev = in_be32(&pci->block_rev1);
                /* PCIe - set CFG_READY bit of Configuration Ready Register */
-               pci_hose_write_config_byte(hose, dev, FSL_PCIE_CFG_RDY, 0x1);
+               if (block_rev >= PEX_IP_BLK_REV_3_0)
+                       setbits_be32(&pci->config, FSL_PCIE_V3_CFG_RDY);
+               else
+                       pci_hose_write_config_byte(hose, dev,
+                                                  FSL_PCIE_CFG_RDY, 0x1);
        } else {
                /* PCI - clear ACL bit of PBFR */
                pci_hose_read_config_word(hose, dev, FSL_PCI_PBFR, &pbfr);