Minor coding style cleanup.

[karo-tx-uboot.git] / include / configs / CPCI2DP.h

diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h
index 5c88c47b505de96d69265c36bf25228be9b7a0ac..afe8d6ef2c74702ee58c7f5e232ce243b256ce0d 100644 (file)
--- a/include/configs/CPCI2DP.h
+++ b/include/configs/CPCI2DP.h
@@ -36,6 +36,8 @@
 #define CONFIG_405GP           1       /* This is a PPC405 CPU         */
 #define CONFIG_4xx             1       /* ...member of PPC4xx family   */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFFFC0000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* call board_early_init_f()    */
 
 #define CONFIG_SYS_CLK_FREQ    33330000 /* external frequency to pll   */
@@ -76,7 +78,7 @@
 #define CONFIG_CMD_EEPROM
 
 #undef CONFIG_CMD_NET
-
+#undef CONFIG_CMD_NFS
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -111,9 +113,14 @@
 #define CONFIG_SYS_MEMTEST_START       0x0400000       /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 
+#define CONFIG_CONS_INDEX      2       /* Use UART1                    */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_serial_clock()
+
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK            /* no external serial clock used */
 #define CONFIG_SYS_BASE_BAUD       691200
-#define CONFIG_UART1_CONSOLE            /* define for uart1 as console  */
 
 /* The following table includes the supported baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE      \
@@ -207,6 +214,7 @@
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C                        /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
 #define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE           0x7F
 
@@ -251,9 +259,8 @@
 #define CONFIG_SYS_INIT_DCACHE_CS      7       /* use cs # 7 for data cache memory    */
 
 #define CONFIG_SYS_INIT_RAM_ADDR       0x40000000  /* use data cache                  */
-#define CONFIG_SYS_INIT_RAM_END        0x2000  /* End of used area in RAM             */
-#define CONFIG_SYS_GBL_DATA_SIZE       128  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2000  /* Size of used area in RAM            */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -264,12 +271,4 @@
 #define CONFIG_SYS_PB_LED              (0x80000000 >> 16)   /* GPIO16 */
 #define CONFIG_SYS_INTA_FAKE           (0x80000000 >> 23)   /* GPIO23 */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
 #endif /* __CONFIG_H */