Unified codebase for TX28, TX48, TX51, TX53

[karo-tx-uboot.git] / include / configs / MIP405.h

diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 7dcf1855a2ca9b9cc6e3eb18e314c21d6e7e0ec0..9961fb55ca509c3e6c6381bad334837e21ef4dd8 100644 (file)
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -35,6 +35,9 @@
 #define CONFIG_405GP           1       /* This is a PPC405 CPU         */
 #define CONFIG_4xx             1       /* ...member of PPC4xx family   */
 #define CONFIG_MIP405          1       /* ...on a MIP405 board         */
+
+#define        CONFIG_SYS_TEXT_BASE    0xFFF80000
+
 /***********************************************************
  * Note that it may also be a MIP405T board which is a subset of the
  * MIP405
@@ -84,12 +87,9 @@
 
 #if !defined(CONFIG_MIP405T)
     #define CONFIG_CMD_USB
-    #define CONFIG_CMD_DOC
 #endif
 
 
-#define CONFIG_NAND_LEGACY
-
 #define         CONFIG_SYS_HUSH_PARSER
 #define         CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 /**************************************************************
@@ -100,6 +100,7 @@
  ***************************************************************/
 
 #define CONFIG_HARD_I2C                        /* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
 #define CONFIG_SYS_I2C_SPEED           50000   /* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE           0x7F
 
@@ -178,6 +179,12 @@
 #define CONFIG_SYS_MEMTEST_START       0x0100000       /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0x0C00000       /* 1 ... 12 MB in DRAM  */
 
+#define CONFIG_CONS_INDEX      1       /* Use UART0                    */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_serial_clock()
+
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK            /* no external serial clock used */
 #define CONFIG_SYS_BASE_BAUD       916667
 
@@ -232,18 +239,24 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks           */
-#define CONFIG_SYS_MAX_FLASH_SECT      256     /* max number of sectors on one chip    */
+#define CONFIG_SYS_UPDATE_FLASH_SIZE
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
-#define CONFIG_SYS_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)      */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)      */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+
+#define CONFIG_FLASH_SHOW_PROGRESS     45
+
+#define CONFIG_SYS_MAX_FLASH_BANKS     1
+#define CONFIG_SYS_MAX_FLASH_SECT      256
 
 /*
  * JFFS2 partitions
  *
  */
 /* No command line, one static partition, whole device */
-#undef CONFIG_JFFS2_CMDLINE
+#undef CONFIG_CMD_MTDPARTS
 #define CONFIG_JFFS2_DEV               "nor0"
 #define CONFIG_JFFS2_PART_SIZE         0xFFFFFFFF
 #define CONFIG_JFFS2_PART_OFFSET       0x00000000
@@ -251,7 +264,7 @@
 /* mtdparts command line support */
 /* Note: fake mtd_id used, no linux mtd map file */
 /*
-#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT         "nor0=mip405-0"
 #define MTDPARTS_DEFAULT       "mtdparts=mip405-0:-(jffs2)"
 */
@@ -284,6 +297,7 @@
 #define FLASH_SIZE_PRELIM       3  /* maximal flash FLASH size bank #0 */
 
 #define CONFIG_BOARD_EARLY_INIT_F 1
+#define CONFIG_BOARD_EARLY_INIT_R
 
 /* Peripheral Bus Mapping */
 #define PER_PLD_ADDR           0xF4000000 /* smallest window is 1MByte 0x10 0000*/
@@ -301,29 +315,15 @@
 #define CONFIG_SYS_OCM_DATA_ADDR       0xF0000000
 #define CONFIG_SYS_OCM_DATA_SIZE       0x1000
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_OCM_DATA_ADDR        /* inside of On Chip SRAM    */
-#define CONFIG_SYS_INIT_RAM_END        CONFIG_SYS_OCM_DATA_SIZE        /* End of On Chip SRAM         */
-#define CONFIG_SYS_GBL_DATA_SIZE       64              /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       CONFIG_SYS_OCM_DATA_SIZE        /* Size of On Chip SRAM        */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 /* reserve some memory for POST and BOOT limit info */
 #define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_GBL_DATA_OFFSET - 32)
 
-#ifdef  CONFIG_POST            /* reserve one word for POST Info */
-#define CONFIG_SYS_POST_WORD_ADDR      (CONFIG_SYS_GBL_DATA_OFFSET - 4)
-#endif
-
 #ifdef CONFIG_BOOTCOUNT_LIMIT /* reserve 2 word for bootcount limit */
 #define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 12)
 #endif
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
-
-
 /***********************************************************************
  * External peripheral base address
  ***********************************************************************/
@@ -336,6 +336,7 @@
 /************************************************************
  * Ethernet Stuff
  ***********************************************************/
+#define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                1       /* PHY address                  */
 #define CONFIG_PHY_RESET_DELAY 300     /* Intel LXT971A needs this */
@@ -381,13 +382,6 @@
 #define CONFIG_MAC_PARTITION
 #define CONFIG_ISO_PARTITION /* Experimental */
 
-/************************************************************
- * Disk-On-Chip configuration
- ************************************************************/
-#define CONFIG_SYS_MAX_DOC_DEVICE      1       /* Max number of DOC devices            */
-#define CONFIG_SYS_DOC_SHORT_TIMEOUT
-#define CONFIG_SYS_DOC_SUPPORT_2000
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 /************************************************************
  * Keyboard support
  ************************************************************/
@@ -413,7 +407,7 @@
 #define CONFIG_USB_STORAGE
 
 /* Enable needed helper functions */
-#define CONFIG_SYS_DEVICE_DEREGISTER           /* needs device_deregister */
+#define CONFIG_SYS_STDIO_DEREGISTER            /* needs stdio_deregister */
 #endif
 /************************************************************
  * Debug support