85xx: Convert MPC8540EVAL to new TLB setup

[karo-tx-uboot.git] / include / configs / MPC8540EVAL.h

diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index 418a3a38e683c1fbb1b047a6c5fa0aae38454f48..416cee4b2fc69b08d93897fc49494b82718f8381 100644 (file)
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -43,6 +43,9 @@
 #undef  CONFIG_DDR_ECC                     /* only for ECC DDR module */
 #define CONFIG_DDR_DLL                      /* possible DLL fix needed */
 
+#define CONFIG_FSL_LAW         1       /* Use common FSL init code */
+#define CONFIG_FSL_INIT_TLBS   1       /* Use common FSL init code */
+
 /* Using Localbus SDRAM to emulate flash before we can program the flash,
  * normally you only need a flash-boot image(u-boot.bin),if unsure undef this.
  * Not availabe for EVAL board
@@ -212,11 +215,14 @@
 #elif defined(CONFIG_TSEC_ENET)
 #define CONFIG_NET_MULTI       1
 #define CONFIG_MII             1       /* MII PHY management   */
-#define CONFIG_MPC85XX_TSEC1    1
-#define CONFIG_MPC85XX_TSEC1_NAME      "TSEC0"
-#define CONFIG_MPC85XX_TSEC2   1
-#define CONFIG_MPC85XX_TSEC2_NAME      "TSEC1"
+#define CONFIG_TSEC1    1
+#define CONFIG_HAS_ETH0
+#define CONFIG_TSEC1_NAME      "TSEC0"
+#define CONFIG_TSEC2   1
+#define CONFIG_HAS_ETH1
+#define CONFIG_TSEC2_NAME      "TSEC1"
 #define CONFIG_MPC85XX_FEC      1
+#define CONFIG_HAS_ETH2
 #define CONFIG_MPC85XX_FEC_NAME                "FEC"
 #define TSEC1_PHY_ADDR          7
 #define        TSEC2_PHY_ADDR          4
@@ -224,6 +230,10 @@
 #define TSEC1_PHYIDX            0
 #define TSEC2_PHYIDX            0
 #define FEC_PHYIDX              0
+#define TSEC1_FLAGS            TSEC_GIGABIT
+#define TSEC2_FLAGS            TSEC_GIGABIT
+#define FEC_FLAGS              0
+
 /* Options are: TSEC[0-1], FEC */
 #define CONFIG_ETHPRIME                "TSEC0"
 
@@ -259,26 +269,33 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change        */
 
-#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
-#if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS       ((CONFIG_CMD_DFL | CFG_CMD_PING \
-                               | CFG_CMD_PCI | CFG_CMD_I2C ) & \
-                                ~(CFG_CMD_ENV | CFG_CMD_LOADS ))
-#else
-#define  CONFIG_COMMANDS       ((CONFIG_CMD_DFL | CFG_CMD_PING \
-                               | CFG_CMD_I2C ) & \
-                                ~(CFG_CMD_ENV | CFG_CMD_LOADS ))
-#endif
-#else
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
 #if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL | CFG_CMD_PCI \
-                               | CFG_CMD_PING | CFG_CMD_I2C )
-#else
-#define  CONFIG_COMMANDS       (CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C )
+    #define CONFIG_CMD_PCI
 #endif
+
+#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -288,7 +305,7 @@
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_LOAD_ADDR   0x2000000       /* default load address */
 #define CFG_PROMPT     "MPC8540EVAL=> "/* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -305,13 +322,6 @@
  */
 #define CFG_BOOTMAPSZ  (8 << 20)       /* Initial Memory map for Linux */
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE        32768
-#define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value */
-#endif
-
 /*
  * Internal Definitions
  *
@@ -320,7 +330,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot              */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif