Merge branch 'master' of git://git.denx.de/u-boot-usb

[karo-tx-uboot.git] / include / configs / P2020DS.h

diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index b5078cdb524e991c43715daa7f7c52132760b2e6..820b6332a60cdc0026ff4eda451447a716024541 100644 (file)
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -20,27 +20,26 @@
 #ifdef CONFIG_SDCARD
 #define CONFIG_SYS_RAMBOOT
 #define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_SYS_TEXT_BASE           0xf8f80000
+#define CONFIG_SYS_TEXT_BASE           0xf8f40000
 #define CONFIG_RESET_VECTOR_ADDRESS    0xf8fffffc
 #endif
 
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_SYS_RAMBOOT
 #define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_SYS_TEXT_BASE           0xf8f80000
+#define CONFIG_SYS_TEXT_BASE           0xf8f40000
 #define CONFIG_RESET_VECTOR_ADDRESS    0xf8fffffc
 #endif
 
 /* High Level Configuration Options */
 #define CONFIG_BOOKE           1       /* BOOKE */
 #define CONFIG_E500            1       /* BOOKE e500 family */
-#define CONFIG_MPC85xx         1       /* MPC8540/60/55/41/48 */
 #define CONFIG_P2020           1
 #define CONFIG_P2020DS         1
 #define CONFIG_MP              1       /* support multiple processors */
 
 #ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xeff80000
+#define CONFIG_SYS_TEXT_BASE   0xeff40000
 #endif
 
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
@@ -109,9 +108,9 @@
 /* DDR Setup */
 #define CONFIG_VERY_BIG_RAM
 #ifdef CONFIG_DDR2
-#define CONFIG_FSL_DDR2
+#define CONFIG_SYS_FSL_DDR2
 #else
-#define CONFIG_FSL_DDR3                1
+#define CONFIG_SYS_FSL_DDR3            1
 #endif
 
 /* ECC will be enabled based on perf_mode environment variable */
@@ -285,7 +284,7 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_LEN         (256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN         (768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN          (1024 * 1024)   /* Reserved for malloc */
 
 #define CONFIG_SYS_NAND_BASE           0xffa00000
@@ -513,6 +512,7 @@
 #define CONFIG_SCSI_AHCI
 
 #ifdef CONFIG_SCSI_AHCI
+#define CONFIG_LIBATA
 #define CONFIG_SATA_ULI5288
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID    4
 #define CONFIG_SYS_SCSI_MAX_LUN        1
@@ -577,11 +577,7 @@
 #define CONFIG_ENV_SECT_SIZE           0x10000
 #else
 #define CONFIG_ENV_IS_IN_FLASH 1
-#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
-#define CONFIG_ENV_ADDR                0xfff80000
-#else
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-#endif
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 #endif
@@ -650,7 +646,6 @@
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
 #else
@@ -659,7 +654,6 @@
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -671,7 +665,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*