arm: mvebu: add multiple usb-hostcontroller support for AXP

[karo-tx-uboot.git] / include / configs / db-88f6820-gp.h

diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index 24dbf6bf713d7a72a941b30320f0e5b17af89345..739c2bf3d5553bd81bdd78c72f68b2b9b9d9b9f7 100644 (file)
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -11,6 +11,7 @@
  * High Level Configuration Options (easy to change)
  */
 #define CONFIG_ARMADA_XP               /* SOC Family Name */
+#define CONFIG_ARMADA_38X
 #define CONFIG_DB_88F6820_GP           /* Board target name for DDR training */
 
 #define CONFIG_SYS_L2_PL310
@@ -29,12 +30,19 @@
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_MMC
 #define CONFIG_CMD_PING
+#define CONFIG_CMD_SCSI
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_TFTPPUT
 #define CONFIG_CMD_TIME
+#define CONFIG_CMD_USB
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -48,6 +56,40 @@
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_3
 #define CONFIG_SPI_FLASH_STMICRO
 
+/*
+ * SDIO/MMC Card Configuration
+ */
+#define CONFIG_MMC
+#define CONFIG_MMC_SDMA
+#define CONFIG_GENERIC_MMC
+#define CONFIG_SDHCI
+#define CONFIG_MV_SDHCI
+#define CONFIG_SYS_MMC_BASE            MVEBU_SDIO_BASE
+
+/*
+ * SATA/SCSI/AHCI configuration
+ */
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID    2
+#define CONFIG_SYS_SCSI_MAX_LUN                1
+#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+                                        CONFIG_SYS_SCSI_MAX_LUN)
+
+/* Partition support */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+
+/* Additional FS support/configuration */
+#define CONFIG_SUPPORT_VFAT
+
+/* USB/EHCI configuration */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI_MARVELL
+#define CONFIG_EHCI_IS_TDI
+
 /* Environment in SPI NOR flash */
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_OFFSET              (1 << 20) /* 1MiB in */
@@ -67,6 +109,68 @@
        "fdt_high=0x10000000\0"         \
        "initrd_high=0x10000000\0"
 
+/* SPL */
+/*
+ * Select the boot device here
+ *
+ * Currently supported are:
+ * SPL_BOOT_SPI_NOR_FLASH      - Booting via SPI NOR flash
+ * SPL_BOOT_SDIO_MMC_CARD      - Booting via SDIO/MMC card (partition 1)
+ */
+#define SPL_BOOT_SPI_NOR_FLASH         1
+#define SPL_BOOT_SDIO_MMC_CARD         2
+#define CONFIG_SPL_BOOT_DEVICE         SPL_BOOT_SPI_NOR_FLASH
+
+/* Defines for SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_SIZE                        (140 << 10)
+#define CONFIG_SPL_TEXT_BASE           0x40000030
+#define CONFIG_SPL_MAX_SIZE            (CONFIG_SPL_SIZE - 0x0030)
+
+#define CONFIG_SPL_BSS_START_ADDR      (0x40000000 + CONFIG_SPL_SIZE)
+#define CONFIG_SPL_BSS_MAX_SIZE                (16 << 10)
+
+#define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SPL_BSS_START_ADDR + \
+                                        CONFIG_SPL_BSS_MAX_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_SIZE     (16 << 10)
+
+#define CONFIG_SPL_STACK               (0x40000000 + ((192 - 16) << 10))
+#define CONFIG_SPL_BOOTROM_SAVE                (CONFIG_SPL_STACK + 4)
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+
+#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
+/* SPL related SPI defines */
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS             0
+#define CONFIG_SPL_SPI_CS              0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
+#define CONFIG_SYS_U_BOOT_OFFS         CONFIG_SYS_SPI_U_BOOT_OFFS
+#endif
+
+#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
+/* SPL related MMC defines */
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1
+#define CONFIG_SYS_MMC_U_BOOT_OFFS             (160 << 10)
+#define CONFIG_SYS_U_BOOT_OFFS                 CONFIG_SYS_MMC_U_BOOT_OFFS
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        (CONFIG_SYS_U_BOOT_OFFS / 512)
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     ((512 << 10) / 512) /* 512KiB */
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER      0x00180000      /* in SDRAM */
+#endif
+#endif
+
+/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
+#define CONFIG_SYS_MVEBU_DDR_A38X
+#define CONFIG_DDR3
+
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros