#ifndef __CONFIG_H
#define __CONFIG_H
+/* SPL */
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+/*
+#define CONFIG_SPL_SATA_SUPPORT
+*/
+/* Location in NAND to read U-Boot from */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
+
+#include "imx6_spl.h" /* common IMX6 SPL configuration */
#include "mx6_common.h"
-#define CONFIG_MX6
#define CONFIG_DISPLAY_CPUINFO /* display cpu info */
#define CONFIG_DISPLAY_BOARDINFO_LATE /* display board info (after reloc) */
#define CONFIG_SPI_FLASH_BAR
#define CONFIG_SPI_FLASH_WINBOND
#define CONFIG_SF_DEFAULT_BUS 0
- #define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8))
+ #define CONFIG_SF_DEFAULT_CS 0
/* GPIO 3-19 (21248) */
#define CONFIG_SF_DEFAULT_SPEED 30000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_I2C_GSC 0
+#define CONFIG_I2C_PMIC 1
+#define CONFIG_I2C_EDID
/* MMC Configs */
#define CONFIG_FSL_ESDHC
/* Filesystem support */
#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_UBIFS
#define CONFIG_DOS_PARTITION
-/* Network config - Allow larger/faster download for TFTP/NFS */
-#define CONFIG_IP_DEFRAG
-#define CONFIG_TFTP_BLOCKSIZE 4096
-#define CONFIG_NFS_READ_SIZE 4096
-
/*
* SATA Configs
*/
#define CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCI_FIXUP_DEV
#define CONFIG_PCIE_IMX
#endif
#define CONFIG_CMD_SETEXPR
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_GSC
+#define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */
#define CONFIG_CMD_UBI
#define CONFIG_RBTREE
#define CONFIG_LZO
/* Ethernet support */
#define CONFIG_FEC_MXC
+#define CONFIG_E1000
#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
#define CONFIG_FEC_MXC_PHYADDR 0
#define CONFIG_PHYLIB
#define CONFIG_ARP_TIMEOUT 200UL
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
-#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 1200
+
+/* USB Mass Storage Gadget */
+#define CONFIG_USB_GADGET
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+
+/* Netchip IDs */
+#define CONFIG_G_DNL_VENDOR_NUM 0x0525
+#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
+#define CONFIG_G_DNL_MANUFACTURER "Gateworks"
+
+/* Framebuffer and LCD */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_IPUV3_CLK 260000000
+#define CONFIG_CMD_HDMIDETECT
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
/* serial console (ttymxc1,115200) */
#define CONFIG_CONS_INDEX 1
"dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
+ "usb_pgood_delay=2000\0" \
"console=ttymxc1\0" \
"bootdevs=usb mmc sata flash\0" \
HWCONFIG_DEFAULT \
\
"fdt_high=0xffffffff\0" \
"fdt_addr=0x18000000\0" \
+ "initrd_high=0xffffffff\0" \
+ "bootdir=boot\0" \
"loadfdt=" \
- "if ${fsload} ${fdt_addr} boot/${fdt_file}; then " \
- "echo Loaded DTB from boot/${fdt_file}; " \
- "elif ${fsload} ${fdt_addr} boot/${fdt_file1}; then " \
- "echo Loaded DTB from boot/${fdt_file1}; " \
- "elif ${fsload} ${fdt_addr} boot/${fdt_file2}; then " \
- "echo Loaded DTB from boot/${fdt_file2}; " \
+ "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
+ "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
+ "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
+ "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
+ "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
+ "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
"fi\0" \
\
- "script=boot/6x_bootscript-ventana\0" \
+ "script=6x_bootscript-ventana\0" \
"loadscript=" \
- "if ${fsload} ${loadaddr} ${script}; then " \
+ "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
"source; " \
"fi\0" \
\
- "uimage=boot/uImage\0" \
+ "uimage=uImage\0" \
"mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
"mmc_boot=" \
"setenv fsload 'ext2load mmc 0:1'; " \
"mmc dev 0 && mmc rescan && " \
"run loadscript; " \
- "if ${fsload} ${loadaddr} ${uimage}; then " \
+ "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
"root=/dev/mmcblk0p1 rootfstype=ext4 " \
"rootwait rw ${video} ${extra}; " \
"sata_boot=" \
"setenv fsload 'ext2load sata 0:1'; sata init && " \
"run loadscript; " \
- "if ${fsload} ${loadaddr} ${uimage}; then " \
+ "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
"root=/dev/sda1 rootfstype=ext4 " \
"rootwait rw ${video} ${extra}; " \
"usb_boot=" \
"setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
"run loadscript; " \
- "if ${fsload} ${loadaddr} ${uimage}; then " \
+ "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
"root=/dev/sda1 rootfstype=ext4 " \
"rootwait rw ${video} ${extra}; " \
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_EXTRA_ENV_SETTINGS_COMMON \
- "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
\
+ "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
"nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
"tftp ${loadaddr} ${image_rootfs} && " \
"nand erase.part rootfs && " \
\
"flash_boot=" \
"setenv fsload 'ubifsload'; " \
- "ubi part rootfs && ubifsmount ubi0:rootfs; " \
+ "ubi part rootfs; " \
+ "if ubi check boot; then " \
+ "ubifsmount ubi0:boot; " \
+ "setenv root ubi0:rootfs ubi.mtd=2 " \
+ "rootfstype=squashfs,ubifs; " \
+ "setenv bootdir; " \
+ "elif ubi check rootfs; then " \
+ "ubifsmount ubi0:rootfs; " \
+ "setenv root ubi0:rootfs ubi.mtd=2 " \
+ "rootfstype=ubifs; " \
+ "fi; " \
"run loadscript; " \
- "if ${fsload} ${loadaddr} ${uimage}; then " \
+ "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
- "root=ubi0:rootfs ubi.mtd=2 " \
- "rootfstype=ubifs ${video} ${extra}; " \
+ "root=${root} ${video} ${extra}; " \
"if run loadfdt && fdt addr ${fdt_addr}; then " \
"ubifsumount; " \
"bootm ${loadaddr} - ${fdt_addr}; " \
projects / karo-tx-uboot.git / blobdiff