rpi: set fdt_addr_r to 0x00000100 to match default device_tree_address

[karo-tx-uboot.git] / include / configs / jetson-tk1.h

diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h
index d03a66cd224015041733fff1095affa9a4033e0b..e87a01047d30093fb8f3830adc9193117a3cad8c 100644 (file)
--- a/include/configs/jetson-tk1.h
+++ b/include/configs/jetson-tk1.h
@@ -10,32 +10,21 @@
 
 #include <linux/sizes.h>
 
-#include "tegra124-common.h"
+/* enable PMIC */
+#define CONFIG_AS3722_POWER
 
-/* Enable fdt support for Jetson TK1. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE     tegra124-jetson-tk1
-#define CONFIG_OF_CONTROL
-#define CONFIG_OF_SEPARATE
+#include "tegra124-common.h"
 
 /* High-level configuration options */
-#define V_PROMPT                       "Tegra124 (Jetson TK1) # "
 #define CONFIG_TEGRA_BOARD_STRING      "NVIDIA Jetson TK1"
 
 /* Board-specific serial config */
-#define CONFIG_SERIAL_MULTI
 #define CONFIG_TEGRA_ENABLE_UARTD
 #define CONFIG_SYS_NS16550_COM1                NV_PA_APB_UARTD_BASE
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 /* I2C */
 #define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS         TEGRA_I2C_NUM_CONTROLLERS
-#define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
 
 /* SD/MMC */
 #define CONFIG_MMC
@@ -50,9 +39,6 @@
 #define CONFIG_SYS_MMC_ENV_PART                2
 
 /* SPI */
-#define CONFIG_TEGRA114_SPI            /* Compatible w/ Tegra114 SPI */
-#define CONFIG_TEGRA114_SPI_CTRLS      6
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_WINBOND
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #define CONFIG_SF_DEFAULT_SPEED                24000000
@@ -71,11 +57,27 @@
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 
+/* PCI host support */
+#define CONFIG_PCI
+#define CONFIG_PCI_TEGRA
+#define CONFIG_PCI_PNP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
+
+/* PCI networking support */
+#define CONFIG_RTL8169
+
 /* General networking support */
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
 #include "tegra-common-usb-gadget.h"
 #include "tegra-common-post.h"
 
+#define CONFIG_ARMV7_PSCI                      1
+/* Reserve top 1M for secure RAM */
+#define CONFIG_ARMV7_SECURE_BASE               0xfff00000
+#define CONFIG_ARMV7_SECURE_RESERVE_SIZE       0x00100000
+
+#define CONFIG_OF_BOARD_SETUP
+
 #endif /* __CONFIG_H */