ARM: remove broken "impa7" board.

[karo-tx-uboot.git] / include / configs / lart.h

diff --git a/include/configs/lart.h b/include/configs/lart.h
index 4570398cd462b7c9f942a1f5ffb9a17abd80b55e..7316b23948c8945bf839c380f6f82d2ef5c5eacc 100644 (file)
--- a/include/configs/lart.h
+++ b/include/configs/lart.h
@@ -35,23 +35,26 @@
 #define CONFIG_LART            1       /* on an LART Board      */
 
 #undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_DCACHE_OFF
 
 /*
  * Size of malloc() pool
  */
-#define CFG_MALLOC_LEN         (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE      128     /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128*1024)
 
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_CS8900   1       /* we have a CS8900 on-board */
-#define CS8900_BASE            0x20008300
-#define CS8900_BUS16           1
+#define CONFIG_NET_MULTI
+#define CONFIG_CS8900          /* we have a CS8900 on-board */
+#define CONFIG_CS8900_BASE     0x20008300
+#define CONFIG_CS8900_BUS16
 
 /*
  * select serial console configuration
  */
+#define CONFIG_SA1100_SERIAL
 #define CONFIG_SERIAL3          1      /* we use SERIAL 3 on LART */
 
 /* allow to overwrite serial and ethaddr */
@@ -92,25 +95,23 @@
 /*
  * Miscellaneous configurable options
  */
-#define        CFG_LONGHELP                            /* undef to save memory         */
-#define        CFG_PROMPT              "LART # "       /* Monitor Command Prompt       */
-#define        CFG_CBSIZE              256             /* Console I/O Buffer Size      */
-#define        CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define        CFG_MAXARGS             16              /* max number of command args   */
-#define CFG_BARGSIZE           CFG_CBSIZE      /* Boot Argument Buffer Size    */
+#define        CONFIG_SYS_LONGHELP                             /* undef to save memory         */
+#define        CONFIG_SYS_PROMPT               "LART # "       /* Monitor Command Prompt       */
+#define        CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size      */
+#define        CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define        CONFIG_SYS_MAXARGS              16              /* max number of command args   */
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START      0xc0400000      /* memtest works on     */
-#define CFG_MEMTEST_END                0xc0800000      /* 4 ... 8 MB in DRAM   */
+#define CONFIG_SYS_MEMTEST_START       0xc0400000      /* memtest works on     */
+#define CONFIG_SYS_MEMTEST_END         0xc0800000      /* 4 ... 8 MB in DRAM   */
 
-#undef  CFG_CLKS_IN_HZ         /* everything, incl board info, in Hz */
+#define        CONFIG_SYS_LOAD_ADDR            0xc8000000      /* default load address */
 
-#define        CFG_LOAD_ADDR           0xc8000000      /* default load address */
-
-#define        CFG_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED           0x0b            /* set core clock to 220 MHz */
+#define        CONFIG_SYS_HZ                   3686400         /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED            0x0b            /* set core clock to 220 MHz */
 
                                                /* valid baudrates */
-#define CFG_BAUDRATE_TABLE     { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -140,20 +141,20 @@
 #define PHYS_FLASH_1           0x00000000 /* Flash Bank #1 */
 #define PHYS_FLASH_SIZE                0x00400000 /* 4 MB */
 
-#define CFG_FLASH_BASE         PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS    1       /* max number of memory banks           */
-#define CFG_MAX_FLASH_SECT     (31+8)  /* max number of sectors on one chip    */
+#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max number of memory banks           */
+#define CONFIG_SYS_MAX_FLASH_SECT      (31+8)  /* max number of sectors on one chip    */
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT   (2*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT   (2*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
 
-#define        CFG_ENV_IS_IN_FLASH     1
-#define CFG_ENV_ADDR           (PHYS_FLASH_1 + 0x1C000)        /* Addr of Environment Sector   */
-#define CFG_ENV_SIZE           0x4000  /* Total Size of Environment Sector     */
+#define        CONFIG_ENV_IS_IN_FLASH  1
+#define CONFIG_ENV_ADDR                (PHYS_FLASH_1 + 0x1C000)        /* Addr of Environment Sector   */
+#define CONFIG_ENV_SIZE                0x4000  /* Total Size of Environment Sector     */
 
 #endif /* __CONFIG_H */