karo: tx6ul: enable soft i2c driver and 'i2c' command

[karo-tx-uboot.git] / include / configs / tbs2910.h

diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index eef77c82e74ebfb705f71821803cb41482ac9a00..66cb274f68a4fbed81a423755d18c6f281dcb5b7 100644 (file)
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -18,15 +18,10 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT              "Matrix U-Boot> "
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_CBSIZE              1024
 #define CONFIG_SYS_HZ                  1000
 
+#define CONFIG_IMX6_THERMAL
+
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
@@ -55,42 +50,29 @@
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_CONS_INDEX              1
 
+#define CONFIG_PRE_CONSOLE_BUFFER
+#define CONFIG_PRE_CON_BUF_SZ          4096
+#define CONFIG_PRE_CON_BUF_ADDR                0x7C000000
+
 /* *** Command definition *** */
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_MEMTEST
 #define CONFIG_CMD_TIME
 
 /* Filesystems / image support */
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_FS_GENERIC
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_SUPPORT_RAW_INITRD
 #define CONFIG_FIT
 
 /* MMC */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_USDHC_NUM       3
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC4_BASE_ADDR
-
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_SUPPORT_EMMC_BOOT
-#define CONFIG_BOUNCE_BUFFER
 
 /* Ethernet */
 #define CONFIG_FEC_MXC
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
@@ -150,10 +132,10 @@
 #define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
 #define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW    0
-#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_G_DNL_VENDOR_NUM                0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM       0xa4a5
 #define CONFIG_G_DNL_MANUFACTURER      "TBS"
@@ -190,16 +172,6 @@
 #define CONFIG_I2C_EDID
 #endif
 
-/* Fuses */
-#define CONFIG_CMD_FUSE
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
-#endif
-
 /* Environment organization */
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         2