config: exynos: trats2: Enable support for Image.itb at trats2 device

[karo-tx-uboot.git] / include / configs / wandboard.h

diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 6c74c72952586f3e9264591c41af34d4bfa8e1e1..cc665e2036168d82050e7c681d9b56710c4ec831 100644 (file)
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -14,7 +14,6 @@
 #include <asm/imx-common/gpio.h>
 #include <linux/sizes.h>
 
-#define CONFIG_MX6
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
@@ -26,6 +25,8 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (10 * SZ_1M)
 
@@ -56,6 +57,12 @@
 #define CONFIG_LOADADDR                        0x12000000
 #define CONFIG_SYS_TEXT_BASE           0x17800000
 
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED           100000
+
 /* MMC Configuration */
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
@@ -70,6 +77,15 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        2
+#define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS           0
+
 /* Ethernet Configuration */
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
@@ -98,11 +114,16 @@
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IPUV3_CLK 260000000
+#define CONFIG_CMD_HDMIDETECT
 #define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+
+#define CONFIG_CMD_FUSE
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
 
-#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
 #define CONFIG_DEFAULT_FDT_FILE                "imx6dl-wandboard.dtb"
-#elif defined(CONFIG_MX6Q)
 #define CONFIG_DEFAULT_FDT_FILE                "imx6q-wandboard.dtb"
 #endif
 
@@ -135,7 +156,33 @@
                        "fi; "  \
                "fi\0" \
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
-               "root=${mmcroot}\0" \
+               "root=${mmcroot}; run videoargs\0" \
+       "videoargs=" \
+               "setenv nextcon 0; " \
+               "if hdmidet; then " \
+                       "setenv bootargs ${bootargs} " \
+                               "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
+                                       "if=RGB24; " \
+                       "setenv fbmen fbmem=28M; " \
+                       "setexpr nextcon ${nextcon} + 1; " \
+               "else " \
+                       "echo - no HDMI monitor;" \
+               "fi; " \
+               "i2c dev 1; " \
+               "if i2c probe 0x10; then " \
+                       "setenv bootargs ${bootargs} " \
+                               "video=mxcfb${nextcon}:dev=lcd,800x480@60," \
+                                       "if=RGB666,bpp=32; " \
+                       "if test 0 -eq ${nextcon}; then " \
+                               "setenv fbmem fbmem=10M; " \
+                       "else " \
+                               "setenv fbmem ${fbmem},10M; " \
+                       "fi; " \
+                       "setexpr nextcon ${nextcon} + 1; " \
+               "else " \
+                       "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
+               "fi; " \
+               "setenv bootargs ${bootargs} ${fbmem}\0" \
        "loadbootscript=" \
                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
        "bootscript=echo Running bootscript from mmc ...; " \
@@ -199,9 +246,6 @@
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              256
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS            16
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE