mpc83xx: fix NAND bootstrap too big error

[karo-tx-uboot.git] / include / netdev.h

diff --git a/include/netdev.h b/include/netdev.h
index 63cf730a303aa2f5f95c67383f08c4a96c621137..882642a2c442bf3fab8c97426790d177d3f9539a 100644 (file)
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -41,17 +41,28 @@ int board_eth_init(bd_t *bis);
 int cpu_eth_init(bd_t *bis);
 
 /* Driver initialization prototypes */
+int altera_tse_initialize(u8 dev_num, int mac_base,
+                         int sgdma_rx_base, int sgdma_tx_base);
 int au1x00_enet_initialize(bd_t*);
+int at91emac_register(bd_t *bis, unsigned long iobase);
 int bfin_EMAC_initialize(bd_t *bis);
+int cs8900_initialize(u8 dev_num, int base_addr);
 int dc21x4x_initialize(bd_t *bis);
+int davinci_emac_initialize(void);
 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
 int e1000_initialize(bd_t *bis);
 int eepro100_initialize(bd_t *bis);
+int ep93xx_eth_initialize(u8 dev_num, int base_addr);
+int ethoc_initialize(u8 dev_num, int base_addr);
 int eth_3com_initialize (bd_t * bis);
 int fec_initialize (bd_t *bis);
+int fecmxc_initialize (bd_t *bis);
+int ftmac100_initialize(bd_t *bits);
 int greth_initialize(bd_t *bis);
 void gt6426x_eth_initialize(bd_t *bis);
 int inca_switch_initialize(bd_t *bis);
+int kirkwood_egiga_initialize(bd_t *bis);
+int lan91c96_initialize(u8 dev_num, int base_addr);
 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
 int mcdmafec_initialize(bd_t *bis);
 int mcffec_initialize(bd_t *bis);
@@ -69,10 +80,14 @@ int rtl8139_initialize(bd_t *bis);
 int rtl8169_initialize(bd_t *bis);
 int scc_initialize(bd_t *bis);
 int skge_initialize(bd_t *bis);
+int smc911x_initialize(u8 dev_num, int base_addr);
+int smc91111_initialize(u8 dev_num, int base_addr);
 int tsi108_eth_initialize(bd_t *bis);
 int uec_initialize(int index);
+int uec_standard_init(bd_t *bis);
 int uli526x_initialize(bd_t *bis);
 int sh_eth_initialize(bd_t *bis);
+int dm9000_initialize(bd_t *bis);
 
 /* Boards with PCI network controllers can call this from their board_eth_init()
  * function to initialize whatever's on board.
@@ -116,4 +131,51 @@ static inline int pci_eth_init(bd_t *bis)
        return num;
 }
 
+/*
+ * Boards with mv88e61xx switch can use this by defining
+ * CONFIG_MV88E61XX_SWITCH in respective board configheader file
+ * the stuct and enums here are used to specify switch configuration params
+ */
+#if defined(CONFIG_MV88E61XX_SWITCH)
+enum mv88e61xx_cfg_vlan {
+       MV88E61XX_VLANCFG_DEFAULT,
+       MV88E61XX_VLANCFG_ROUTER
+};
+
+enum mv88e61xx_cfg_mdip {
+       MV88E61XX_MDIP_NOCHANGE,
+       MV88E61XX_MDIP_REVERSE
+};
+
+enum mv88e61xx_cfg_ledinit {
+       MV88E61XX_LED_INIT_DIS,
+       MV88E61XX_LED_INIT_EN
+};
+
+enum mv88e61xx_cfg_rgmiid {
+       MV88E61XX_RGMII_DELAY_DIS,
+       MV88E61XX_RGMII_DELAY_EN
+};
+
+enum mv88e61xx_cfg_prtstt {
+       MV88E61XX_PORTSTT_DISABLED,
+       MV88E61XX_PORTSTT_BLOCKING,
+       MV88E61XX_PORTSTT_LEARNING,
+       MV88E61XX_PORTSTT_FORWARDING
+};
+
+struct mv88e61xx_config {
+       char *name;
+       enum mv88e61xx_cfg_vlan vlancfg;
+       enum mv88e61xx_cfg_rgmiid rgmii_delay;
+       enum mv88e61xx_cfg_prtstt portstate;
+       enum mv88e61xx_cfg_ledinit led_init;
+       enum mv88e61xx_cfg_mdip mdip;
+       u32 ports_enabled;
+       u8 cpuport;
+};
+
+int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
+#endif /* CONFIG_MV88E61XX_SWITCH */
+
 #endif /* _NETDEV_H_ */