Merge branch 'master' of git://git.denx.de/u-boot-avr32

[karo-tx-uboot.git] / include / netdev.h

diff --git a/include/netdev.h b/include/netdev.h
index 2794ddd57869a37a738a5332438fba2fda111e31..d1aaf0cd2d0637b597a55c49e746d9fba1b9fd19 100644 (file)
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -41,17 +41,37 @@ int board_eth_init(bd_t *bis);
 int cpu_eth_init(bd_t *bis);
 
 /* Driver initialization prototypes */
+int altera_tse_initialize(u8 dev_num, int mac_base,
+                         int sgdma_rx_base, int sgdma_tx_base,
+                         u32 sgdma_desc_base, u32 sgdma_desc_size);
+int at91emac_register(bd_t *bis, unsigned long iobase);
 int au1x00_enet_initialize(bd_t*);
+int ax88180_initialize(bd_t *bis);
 int bfin_EMAC_initialize(bd_t *bis);
+int calxedaxgmac_initialize(u32 id, ulong base_addr);
+int cs8900_initialize(u8 dev_num, int base_addr);
+int davinci_emac_initialize(void);
 int dc21x4x_initialize(bd_t *bis);
+int designware_initialize(u32 id, ulong base_addr, u32 phy_addr, u32 interface);
+int dm9000_initialize(bd_t *bis);
 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
 int e1000_initialize(bd_t *bis);
 int eepro100_initialize(bd_t *bis);
+int enc28j60_initialize(unsigned int bus, unsigned int cs,
+       unsigned int max_hz, unsigned int mode);
+int ep93xx_eth_initialize(u8 dev_num, int base_addr);
 int eth_3com_initialize (bd_t * bis);
+int ethoc_initialize(u8 dev_num, int base_addr);
 int fec_initialize (bd_t *bis);
+int fecmxc_initialize(bd_t *bis);
+int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
+int ftgmac100_initialize(bd_t *bits);
+int ftmac100_initialize(bd_t *bits);
 int greth_initialize(bd_t *bis);
 void gt6426x_eth_initialize(bd_t *bis);
 int inca_switch_initialize(bd_t *bis);
+int ks8695_eth_initialize(void);
+int lan91c96_initialize(u8 dev_num, int base_addr);
 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
 int mcdmafec_initialize(bd_t *bis);
 int mcffec_initialize(bd_t *bis);
@@ -59,7 +79,9 @@ int mpc512x_fec_initialize(bd_t *bis);
 int mpc5xxx_fec_initialize(bd_t *bis);
 int mpc8220_fec_initialize(bd_t *bis);
 int mpc82xx_scc_enet_initialize(bd_t *bis);
+int mvgbe_initialize(bd_t *bis);
 int natsemi_initialize(bd_t *bis);
+int ne2k_register(void);
 int npe_initialize(bd_t *bis);
 int ns8382x_initialize(bd_t *bis);
 int pcnet_initialize(bd_t *bis);
@@ -68,11 +90,30 @@ int ppc_4xx_eth_initialize (bd_t *bis);
 int rtl8139_initialize(bd_t *bis);
 int rtl8169_initialize(bd_t *bis);
 int scc_initialize(bd_t *bis);
+int sh_eth_initialize(bd_t *bis);
 int skge_initialize(bd_t *bis);
+int smc91111_initialize(u8 dev_num, int base_addr);
+int smc911x_initialize(u8 dev_num, int base_addr);
 int tsi108_eth_initialize(bd_t *bis);
-int uec_initialize(int index);
+int uec_standard_init(bd_t *bis);
 int uli526x_initialize(bd_t *bis);
-int sh_eth_initialize(bd_t *bis);
+int armada100_fec_register(unsigned long base_addr);
+int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr,
+                                                       unsigned long dma_addr);
+int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
+                                                       int txpp, int rxpp);
+int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
+                                               unsigned long ctrl_addr);
+
+/*
+ * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
+ * exported by a public hader file, we need a global definition at this point.
+ */
+#if defined(CONFIG_XILINX_LL_TEMAC)
+#define XILINX_LL_TEMAC_M_FIFO         0       /* use FIFO Ctrl */
+#define XILINX_LL_TEMAC_M_SDMA_PLB     (1 << 0)/* use SDMA Ctrl via PLB */
+#define XILINX_LL_TEMAC_M_SDMA_DCR     (1 << 1)/* use SDMA Ctrl via DCR */
+#endif
 
 /* Boards with PCI network controllers can call this from their board_eth_init()
  * function to initialize whatever's on board.
@@ -108,7 +149,7 @@ static inline int pci_eth_init(bd_t *bis)
 #if defined(CONFIG_RTL8169)
        num += rtl8169_initialize(bis);
 #endif
-#if defined(CONFIG_ULI526)
+#if defined(CONFIG_ULI526X)
        num += uli526x_initialize(bis);
 #endif
 
@@ -116,4 +157,56 @@ static inline int pci_eth_init(bd_t *bis)
        return num;
 }
 
+/*
+ * Boards with mv88e61xx switch can use this by defining
+ * CONFIG_MV88E61XX_SWITCH in respective board configheader file
+ * the stuct and enums here are used to specify switch configuration params
+ */
+#if defined(CONFIG_MV88E61XX_SWITCH)
+enum mv88e61xx_cfg_vlan {
+       MV88E61XX_VLANCFG_DEFAULT,
+       MV88E61XX_VLANCFG_ROUTER
+};
+
+enum mv88e61xx_cfg_mdip {
+       MV88E61XX_MDIP_NOCHANGE,
+       MV88E61XX_MDIP_REVERSE
+};
+
+enum mv88e61xx_cfg_ledinit {
+       MV88E61XX_LED_INIT_DIS,
+       MV88E61XX_LED_INIT_EN
+};
+
+enum mv88e61xx_cfg_rgmiid {
+       MV88E61XX_RGMII_DELAY_DIS,
+       MV88E61XX_RGMII_DELAY_EN
+};
+
+enum mv88e61xx_cfg_prtstt {
+       MV88E61XX_PORTSTT_DISABLED,
+       MV88E61XX_PORTSTT_BLOCKING,
+       MV88E61XX_PORTSTT_LEARNING,
+       MV88E61XX_PORTSTT_FORWARDING
+};
+
+struct mv88e61xx_config {
+       char *name;
+       enum mv88e61xx_cfg_vlan vlancfg;
+       enum mv88e61xx_cfg_rgmiid rgmii_delay;
+       enum mv88e61xx_cfg_prtstt portstate;
+       enum mv88e61xx_cfg_ledinit led_init;
+       enum mv88e61xx_cfg_mdip mdip;
+       u32 ports_enabled;
+       u8 cpuport;
+};
+
+int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
+#endif /* CONFIG_MV88E61XX_SWITCH */
+
+/*
+ * Allow FEC to fine-tune MII configuration on boards which require this.
+ */
+int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
+
 #endif /* _NETDEV_H_ */