CONFIG: EXYNOS5: Enable silent console

[karo-tx-uboot.git] / include / usb_defs.h

diff --git a/include/usb_defs.h b/include/usb_defs.h
index 00a31e905afcb39460cf8eb6768469fac29c98ba..4f3601a16c3a487a05b6bcf8c31cda2d3bc27894 100644 (file)
--- a/include/usb_defs.h
+++ b/include/usb_defs.h
@@ -26,20 +26,6 @@
 #ifndef _USB_DEFS_H_
 #define _USB_DEFS_H_
 
-
-/* Everything is aribtrary */
-#define USB_ALTSETTINGALLOC          4
-#define USB_MAXALTSETTING                 128  /* Hard limit */
-
-#define USB_MAX_DEVICE              32
-#define USB_MAXCONFIG                      8
-#define USB_MAXINTERFACES                8
-#define USB_MAXENDPOINTS                 16
-#define USB_MAXCHILDREN                                                8       /* This is arbitrary */
-#define USB_MAX_HUB                                                                    16
-
-#define USB_CNTL_TIMEOUT 100 /* 100ms timeout */
-
 /* USB constants */
 
 /* Device and/or Interface Class codes */
@@ -164,6 +150,18 @@
 #define USB_REQ_SET_IDLE            0x0A
 #define USB_REQ_SET_PROTOCOL        0x0B
 
+/* Device features */
+#define USB_FEAT_HALT               0x00
+#define USB_FEAT_WAKEUP             0x01
+#define USB_FEAT_TEST               0x02
+
+/* Test modes */
+#define USB_TEST_MODE_J             0x01
+#define USB_TEST_MODE_K             0x02
+#define USB_TEST_MODE_SE0_NAK       0x03
+#define USB_TEST_MODE_PACKET        0x04
+#define USB_TEST_MODE_FORCE_ENABLE  0x05
+
 
 /* "pipe" definitions */
 
@@ -189,7 +187,6 @@
 #define USB_ST_NOT_PROC         0x80000000L    /* Not yet processed */
 
 
-
 /*************************************************************************
  * Hub defines
  */
@@ -217,11 +214,24 @@
 #define USB_PORT_FEAT_RESET          4
 #define USB_PORT_FEAT_POWER          8
 #define USB_PORT_FEAT_LOWSPEED       9
+#define USB_PORT_FEAT_HIGHSPEED      10
 #define USB_PORT_FEAT_C_CONNECTION   16
 #define USB_PORT_FEAT_C_ENABLE       17
 #define USB_PORT_FEAT_C_SUSPEND      18
 #define USB_PORT_FEAT_C_OVER_CURRENT 19
 #define USB_PORT_FEAT_C_RESET        20
+#define USB_PORT_FEAT_TEST           21
+
+/*
+ * Changes to Port feature numbers for Super speed,
+ * from USB 3.0 spec Table 10-8
+ */
+#define USB_SS_PORT_FEAT_U1_TIMEOUT    23
+#define USB_SS_PORT_FEAT_U2_TIMEOUT    24
+#define USB_SS_PORT_FEAT_C_LINK_STATE  25
+#define USB_SS_PORT_FEAT_C_CONFIG_ERROR        26
+#define USB_SS_PORT_FEAT_BH_RESET      28
+#define USB_SS_PORT_FEAT_C_BH_RESET    29
 
 /* wPortStatus bits */
 #define USB_PORT_STAT_CONNECTION    0x0001
@@ -231,6 +241,19 @@
 #define USB_PORT_STAT_RESET         0x0010
 #define USB_PORT_STAT_POWER         0x0100
 #define USB_PORT_STAT_LOW_SPEED     0x0200
+#define USB_PORT_STAT_HIGH_SPEED    0x0400     /* support for EHCI */
+#define USB_PORT_STAT_SUPER_SPEED   0x0600     /* faking support to XHCI */
+#define USB_PORT_STAT_SPEED_MASK       \
+       (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED)
+
+/*
+ * Changes to wPortStatus bit field in USB 3.0
+ * See USB 3.0 spec Table 10-11
+ */
+#define USB_SS_PORT_STAT_LINK_STATE    0x01e0
+#define USB_SS_PORT_STAT_POWER         0x0200
+#define USB_SS_PORT_STAT_SPEED         0x1c00
+#define USB_SS_PORT_STAT_SPEED_5GBPS   0x0000
 
 /* wPortChange bits */
 #define USB_PORT_STAT_C_CONNECTION  0x0001
@@ -239,13 +262,21 @@
 #define USB_PORT_STAT_C_OVERCURRENT 0x0008
 #define USB_PORT_STAT_C_RESET       0x0010
 
+/*
+ * Changes to wPortChange bit fields in USB 3.0
+ * See USB 3.0 spec Table 10-12
+ */
+#define USB_SS_PORT_STAT_C_BH_RESET    0x0020
+#define USB_SS_PORT_STAT_C_LINK_STATE  0x0040
+#define USB_SS_PORT_STAT_C_CONFIG_ERROR        0x0080
+
 /* wHubCharacteristics (masks) */
 #define HUB_CHAR_LPSM               0x0003
 #define HUB_CHAR_COMPOUND           0x0004
 #define HUB_CHAR_OCPM               0x0018
 
 /*
- *Hub Status & Hub Change bit masks
+ * Hub Status & Hub Change bit masks
  */
 #define HUB_STATUS_LOCAL_POWER 0x0001
 #define HUB_STATUS_OVERCURRENT 0x0002