1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX27 current ;
34 package -hardware CYGPKG_HAL_ARM_TX27KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX27 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
54 # ---- conflicts -------------------------------------------------------
55 # There are no conflicts.
57 # ---- contents --------------------------------------------------------
60 # Global build options
61 # Global build options including control over
62 # compiler flags, linker flags and choice of toolchain.
64 cdl_component CYGBLD_GLOBAL_OPTIONS {
65 # There is no associated value.
67 # The following properties are affected by this value
71 # Global command prefix
72 # This option specifies the command prefix used when
73 # invoking the build tools.
75 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
77 # No user value, uncomment the following line to provide one.
78 # user_value arm-926ejs-linux-gnu
79 # value_source default
80 # Default value: arm-926ejs-linux-gnu
83 # Global compiler flags
84 # This option controls the global compiler flags which are used to
85 # compile all packages by default. Individual packages may define
86 # options which override these global flags.
88 cdl_option CYGBLD_GLOBAL_CFLAGS {
90 # No user value, uncomment the following line to provide one.
91 # user_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # The inferred value should not be edited directly.
93 inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
94 # value_source inferred
95 # Default value: "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
96 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
97 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
100 # The following properties are affected by this value
101 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
103 # option CYGBLD_INFRA_CFLAGS_PIPE
104 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
107 # Global linker flags
108 # This option controls the global linker flags. Individual
109 # packages may define options which override these global flags.
111 cdl_option CYGBLD_GLOBAL_LDFLAGS {
113 # No user value, uncomment the following line to provide one.
114 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
115 # value_source default
116 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
119 # Build common GDB stub ROM image
120 # Unless a target board has specific requirements to the
121 # stub implementation, it can use a simple common stub.
122 # This option, which gets enabled by platform HALs as
123 # appropriate, controls the building of the common stub.
125 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
127 # No user value, uncomment the following line to provide one.
129 # value_source default
131 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
132 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
137 # ISO C library string functions
139 # This package provides string functions specified by the
140 # ISO C standard - ISO/IEC 9899:1990.
142 cdl_package CYGPKG_LIBC_STRING {
143 # Packages cannot be added or removed, nor can their version be changed,
144 # simply by editing their value. Instead the appropriate configuration
145 # should be used to perform these actions.
147 # This value cannot be modified here.
149 # Current value: 1 current
150 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
151 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
153 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
154 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
156 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
157 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
159 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
160 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
162 # Requires: CYGPKG_ISOINFRA
163 # CYGPKG_ISOINFRA == current
168 # Inline versions of <string.h> functions
169 # This option chooses whether some of the
170 # particularly simple string functions from
171 # <string.h> are available as inline
172 # functions. This may improve performance, and as
173 # the functions are small, may even improve code
176 cdl_option CYGIMP_LIBC_STRING_INLINES {
178 # No user value, uncomment the following line to provide one.
180 # value_source default
184 # Optimize string functions for code size
185 # This option tries to reduce string function
186 # code size at the expense of execution speed. The
187 # same effect can be produced if the code is
188 # compiled with the -Os option to the compiler.
190 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
192 # No user value, uncomment the following line to provide one.
194 # value_source default
198 # Provide BSD compatibility functions
199 # Enabling this option causes various compatibility functions
200 # commonly found in the BSD UNIX operating system to be included.
201 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
202 # strncasecmp, index, rindex and swab.
204 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
206 # No user value, uncomment the following line to provide one.
208 # The inferred value should not be edited directly.
210 # value_source inferred
212 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
213 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
215 # Requires: CYGINT_ISO_CTYPE
216 # CYGINT_ISO_CTYPE == 1
221 # These options control the behaviour of the
222 # strtok() and strtok_r() string tokenization
225 cdl_component CYGPKG_LIBC_STRING_STRTOK {
226 # There is no associated value.
230 # Per-thread strtok()
231 # This option controls whether the string function
232 # strtok() has its state recorded on a per-thread
233 # basis rather than global. If this option is
234 # disabled, some per-thread space can be saved.
235 # Note there is also a POSIX-standard strtok_r()
236 # function to achieve a similar effect with user
237 # support. Enabling this option will use one slot
238 # of kernel per-thread data. You should ensure you
239 # have enough slots configured for all your
242 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
243 # This option is not active
244 # ActiveIf constraint: CYGPKG_KERNEL
245 # CYGPKG_KERNEL (unknown) == 0
249 # No user value, uncomment the following line to provide one.
251 # value_source default
252 # Default value: CYGVAR_KERNEL_THREADS_DATA
253 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
255 # Requires: CYGVAR_KERNEL_THREADS_DATA
256 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
261 # Trace verbosity level for debugging the <string.h>
262 # functions strtok() and strtok_r(). Increase this
263 # value to get additional trace output.
265 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
267 # No user value, uncomment the following line to provide one.
269 # value_source default
271 # Legal values: 0 to 1
276 # This option indicates whether strdup() is to be supported.
278 cdl_option CYGFUN_LIBC_STRING_STRDUP {
279 # ActiveIf constraint: CYGINT_ISO_MALLOC
280 # CYGINT_ISO_MALLOC == 1
283 # Calculated value: 1
288 # C library string functions build options
289 # Package specific build options including control over
290 # compiler flags used only in building this package,
291 # and details of which tests are built.
293 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
294 # There is no associated value.
298 # Additional compiler flags
299 # This option modifies the set of compiler flags for
300 # building the C library. These flags are used in addition
301 # to the set of global flags.
303 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
305 # No user value, uncomment the following line to provide one.
306 # user_value "-fno-rtti -Woverloaded-virtual"
307 # value_source default
308 # Default value: "-fno-rtti -Woverloaded-virtual"
311 # Suppressed compiler flags
312 # This option modifies the set of compiler flags for
313 # building the C library. These flags are removed from
314 # the set of global flags if present.
316 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
318 # No user value, uncomment the following line to provide one.
319 # user_value -Wno-pointer-sign
320 # value_source default
321 # Default value: -Wno-pointer-sign
324 # C library string function tests
325 # This option specifies the set of tests for the C library
328 cdl_option CYGPKG_LIBC_STRING_TESTS {
329 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
331 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
336 # Common ethernet support
337 # doc: ref/io-eth-drv-generic.html
338 # Platform independent ethernet drivers
340 cdl_package CYGPKG_IO_ETH_DRIVERS {
341 # Packages cannot be added or removed, nor can their version be changed,
342 # simply by editing their value. Instead the appropriate configuration
343 # should be used to perform these actions.
345 # This value cannot be modified here.
347 # Current value: 1 current
349 # The following properties are affected by this value
350 # component CYGPKG_REDBOOT_NETWORKING
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_ARM_TX27
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_FEC
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
356 # package CYGPKG_DEVS_ETH_PHY
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
363 cdl_interface CYGHWR_NET_DRIVERS {
364 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
365 # This value cannot be modified here.
369 # The following properties are affected by this value
370 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
372 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
373 # ActiveIf: CYGHWR_NET_DRIVERS > 1
376 # Driver supports multicast addressing
377 # This interface defines whether or not a driver can handle
378 # requests for multicast addressing.
380 cdl_interface CYGINT_IO_ETH_MULTICAST {
381 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
382 # This value cannot be modified here.
386 # The following properties are affected by this value
389 # Support printing driver debug information
390 # Selecting this option will include code to allow the driver to
391 # print lots of information on diagnostic output such as full
394 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
403 # Driver debug output verbosity
404 # The value of this option indicates the default verbosity
405 # level of debugging output. 0 means no debugging output
406 # is made by default. Higher values indicate higher verbosity.
407 # The verbosity level may also be changed at run time by
408 # changing the variable cyg_io_eth_net_debug.
410 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
412 # No user value, uncomment the following line to provide one.
414 # value_source default
419 # Size of scatter-gather I/O lists
420 # A scatter-gather list is used to pass requests to/from
421 # the physical device driver. This list can typically be
422 # small, as the data is normally already packed into reasonable
425 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
427 # No user value, uncomment the following line to provide one.
429 # value_source default
433 # Support for standard eCos TCP/IP stack.
435 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
436 # This option is not active
437 # ActiveIf constraint: CYGPKG_NET
438 # CYGPKG_NET (unknown) == 0
442 # No user value, uncomment the following line to provide one.
444 # value_source default
446 # Requires: CYGINT_ISO_STRING_STRFUNCS
447 # CYGINT_ISO_STRING_STRFUNCS == 1
452 # Warn when there are no more mbufs
453 # Warnings about running out of mbufs are printed to the
454 # diagnostic output channel via diag_printf() if this option
455 # is enabled. Mbufs are the network stack's basic dynamic
456 # memory objects that hold all packets in transit; running
457 # out is bad for performance but not fatal, not a crash.
458 # You might want to turn off the warnings to preserve realtime
459 # properties of the system even in extremis.
461 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
462 # This option is not active
463 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
466 # No user value, uncomment the following line to provide one.
468 # value_source default
472 # Simulate network failures for testing
473 # This package contains a suite of simulated failure modes
474 # for the ethernet device layer, including dropping and/or
475 # corrupting received packets, dropping packets queued for
476 # transmission, and simulating a complete network break.
477 # It requires the kernel as a source of time information.
479 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
480 # This option is not active
481 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
484 # No user value, uncomment the following line to provide one.
486 # value_source default
491 # Drop incoming packets (percentage)
493 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
494 # This option is not active
495 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
496 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
499 # No user value, uncomment the following line to provide one.
501 # value_source default
502 # Default value: 1 10
503 # Legal values: 10 50 80
506 # Corrupt incoming packets (percentage)
508 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
509 # This option is not active
510 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
511 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
514 # No user value, uncomment the following line to provide one.
516 # value_source default
517 # Default value: 1 10
518 # Legal values: 10 50 80
521 # Drop outgoing packets (percentage)
523 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
524 # This option is not active
525 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
526 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
529 # No user value, uncomment the following line to provide one.
531 # value_source default
532 # Default value: 1 10
533 # Legal values: 10 50 80
536 # Simulate a line cut from time to time
537 # This option causes the system to drop all packets for a
538 # short random period (10s of seconds), and then act
539 # normally for up to 4 times that long. This simulates your
540 # sysadmin fiddling with plugs in the network switch
543 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
544 # This option is not active
545 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
546 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
549 # No user value, uncomment the following line to provide one.
551 # value_source default
557 # Support for stand-alone network stack.
559 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
560 # ActiveIf constraint: !CYGPKG_NET
561 # CYGPKG_NET (unknown) == 0
565 # No user value, uncomment the following line to provide one.
567 # value_source default
569 # Requires: CYGINT_ISO_STRING_MEMFUNCS
570 # CYGINT_ISO_STRING_MEMFUNCS == 1
575 # Pass packets to an alternate stack
576 # Define this to allow packets seen by this layer to be
577 # passed on to the previous logical layer, i.e. when
578 # stand-alone processing replaces system (eCos) processing.
580 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
582 # No user value, uncomment the following line to provide one.
584 # value_source default
585 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
586 # CYGPKG_REDBOOT_NETWORKING == 1
590 # Number of [network] buffers
591 # This option is used to allocate space to buffer incoming network
592 # packets. These buffers are used to hold data until they can be
593 # logically processed by higher layers.
595 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
597 # No user value, uncomment the following line to provide one.
599 # value_source default
601 # Legal values: 2 to 32
604 # Show driver warnings
605 # Selecting this option will allows the stand-alone ethernet driver
606 # to display warnings on the system console when incoming network
607 # packets are being discarded due to lack of buffer space.
609 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
610 # ActiveIf constraint: CYGPKG_REDBOOT
611 # CYGPKG_REDBOOT == current
615 # No user value, uncomment the following line to provide one.
617 # value_source default
622 # Support for lwIP network stack.
624 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
625 # This option is not active
626 # ActiveIf constraint: CYGPKG_NET_LWIP
627 # CYGPKG_NET_LWIP (unknown) == 0
631 # No user value, uncomment the following line to provide one.
633 # value_source default
635 # Requires: !CYGPKG_NET
636 # CYGPKG_NET (unknown) == 0
640 # Interrupt support required
641 # This interface is used to indicate to the low
642 # level device drivers that interrupt driven operation
643 # is required by higher layers.
645 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
646 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
647 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
648 # This value cannot be modified here.
652 # The following properties are affected by this value
655 # Common ethernet support build options
657 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
658 # There is no associated value.
662 # Additional compiler flags
663 # This option modifies the set of compiler flags for
664 # building the common ethernet support package. These flags are used in addition
665 # to the set of global flags.
667 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
669 # No user value, uncomment the following line to provide one.
670 # user_value "-D_KERNEL -D__ECOS"
671 # value_source default
672 # Default value: "-D_KERNEL -D__ECOS"
676 # Ethernet driver for Ka-Ro electronics TX27 processor module
678 cdl_package CYGPKG_DEVS_ETH_ARM_TX27 {
679 # Packages cannot be added or removed, nor can their version be changed,
680 # simply by editing their value. Instead the appropriate configuration
681 # should be used to perform these actions.
683 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
684 # CYGPKG_IO_ETH_DRIVERS == current
687 # This value cannot be modified here.
689 # Current value: 1 current
693 # FEC ethernet driver required
695 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
696 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
697 # This value cannot be modified here.
701 # The following properties are affected by this value
702 # package CYGPKG_DEVS_ETH_FEC
703 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
706 # Ka-Ro TX27 ethernet port driver
707 # This option includes the ethernet device driver for the
710 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
712 # No user value, uncomment the following line to provide one.
714 # value_source default
716 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
717 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
719 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
720 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
725 # Device name for the ETH0 ethernet driver
726 # This option sets the name of the ethernet device.
728 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
730 # No user value, uncomment the following line to provide one.
731 # user_value "\"eth0\""
732 # value_source default
733 # Default value: "\"eth0\""
736 # OUI part of MAC address
737 # This option sets OUI part (manufacturer ID) of the MAC address
740 cdl_option CYGDAT_DEVS_ETH_ARM_TX27KARO_OUI {
741 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
742 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
746 # No user value, uncomment the following line to provide one.
747 # user_value "{ 0x00, 0x0c, 0xc6 }"
748 # value_source default
749 # Default value: "{ 0x00, 0x0c, 0xc6 }"
754 # Driver for fast ethernet controller.
755 # Driver for fast ethernet controller.
757 cdl_package CYGPKG_DEVS_ETH_FEC {
758 # Packages cannot be added or removed, nor can their version be changed,
759 # simply by editing their value. Instead the appropriate configuration
760 # should be used to perform these actions.
762 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
763 # CYGPKG_IO_ETH_DRIVERS == current
765 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
766 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
769 # This value cannot be modified here.
771 # Current value: 1 current
775 # MXC FEC ethernet driver build options
777 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
778 # There is no associated value.
782 # Additional compiler flags
783 # This option modifies the set of compiler flags for
784 # building the Cirrus Logic ethernet driver package.
785 # These flags are used in addition
786 # to the set of global flags.
788 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
790 # No user value, uncomment the following line to provide one.
791 # user_value "-D_KERNEL -D__ECOS"
792 # value_source default
793 # Default value: "-D_KERNEL -D__ECOS"
798 # Ethernet transceiver (PHY) support
799 # API for ethernet PHY devices
801 cdl_package CYGPKG_DEVS_ETH_PHY {
802 # Packages cannot be added or removed, nor can their version be changed,
803 # simply by editing their value. Instead the appropriate configuration
804 # should be used to perform these actions.
806 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
807 # CYGPKG_IO_ETH_DRIVERS == current
810 # This value cannot be modified here.
812 # Current value: 1 current
813 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
814 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
819 # Enable driver debugging
820 # Enables the diagnostic debug messages on the
823 cdl_option CYGDBG_DEVS_ETH_PHY {
825 # No user value, uncomment the following line to provide one.
827 # value_source default
831 # Time period (seconds) to wait for auto-negotiation
832 # The length of time to wait for auto-negotiation to complete
833 # before giving up and declaring the link dead/missing.
835 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
837 # No user value, uncomment the following line to provide one.
839 # value_source default
844 # Include support for National Semiconductor DP83847 DsPHYTER II
846 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
848 # No user value, uncomment the following line to provide one.
850 # value_source default
855 # Include support for AMD 79C874 NetPHY
857 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
859 # No user value, uncomment the following line to provide one.
861 # value_source default
866 # Include support for Intel LXT972xxx PHY
868 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
870 # No user value, uncomment the following line to provide one.
872 # value_source default
877 # Include support for ICS 1890 PHY
879 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
881 # No user value, uncomment the following line to provide one.
883 # value_source default
888 # Include support for ICS 1892 PHY
890 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
892 # No user value, uncomment the following line to provide one.
894 # value_source default
899 # Include support for ICS 1893 and 1893AF PHY
901 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
903 # No user value, uncomment the following line to provide one.
905 # value_source default
910 # Include support for the Davicom DM9161A PHY
912 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
914 # No user value, uncomment the following line to provide one.
916 # value_source default
921 # Include support for the Micrel KS8721 PHY
923 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
925 # No user value, uncomment the following line to provide one.
927 # value_source default
932 # Include support for SMSC LAN8700 NetPHY
934 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
936 # No user value, uncomment the following line to provide one.
938 # The inferred value should not be edited directly.
940 # value_source inferred
943 # The following properties are affected by this value
944 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
945 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
950 # ISO C library internationalization functions
952 # This package provides internationalization functions specified by the
953 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
954 # functionality and <ctype.h> functionality.
956 cdl_package CYGPKG_LIBC_I18N {
957 # Packages cannot be added or removed, nor can their version be changed,
958 # simply by editing their value. Instead the appropriate configuration
959 # should be used to perform these actions.
961 # This value cannot be modified here.
963 # Current value: 1 current
964 # Requires: CYGPKG_ISOINFRA
965 # CYGPKG_ISOINFRA == current
971 # These options determine which locales other than the "C" locale
972 # are supported and hence contribute to the size of the executable.
974 cdl_component CYGPKG_LIBC_I18N_LOCALES {
975 # There is no associated value.
979 # Support for multiple locales required
981 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
982 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
983 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
984 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
985 # This value cannot be modified here.
988 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
989 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
992 # The following properties are affected by this value
995 # C-SJIS locale support
996 # This option controls if the "C-SJIS" locale will be
997 # supported by setlocale(). The locale is a hybrid locale
998 # that is mostly the "C" locale with Japanese SJIS multibyte
1001 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1003 # No user value, uncomment the following line to provide one.
1005 # value_source default
1008 # The following properties are affected by this value
1009 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1010 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1011 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1012 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1015 # C-JIS locale support
1016 # This option controls if the "C-JIS" locale will be
1017 # supported by setlocale(). The locale is a hybrid locale
1018 # that is mostly the "C" locale with Japanese JIS multibyte
1021 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1023 # No user value, uncomment the following line to provide one.
1025 # value_source default
1028 # The following properties are affected by this value
1029 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1030 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1031 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1032 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1035 # C-EUCJP locale support
1036 # This option controls if the "C-EUCJP" locale will be
1037 # supported by setlocale(). The locale is a hybrid locale
1038 # that is mostly the "C" locale with Japanese EUCJP multibyte
1041 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1043 # No user value, uncomment the following line to provide one.
1045 # value_source default
1048 # The following properties are affected by this value
1049 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1050 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1051 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1052 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1056 # Newlib's ctype implementation
1057 # This option enables the implementation of the ctype functions
1058 # that comes with newlib. It is table driven and therefore
1059 # exhibits different performance characteristics. It also offers
1060 # a limited amount of binary compatibility
1061 # with newlib so that programs linked against newlib ctype/locale
1062 # do not need to be recompiled when linked with eCos.
1064 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1066 # No user value, uncomment the following line to provide one.
1068 # value_source default
1070 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1071 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1075 # Per-thread multibyte state
1076 # This option controls whether the multibyte character
1077 # handling functions mblen(), mbtowc(), and wctomb(),
1078 # have their state recorded on a per-thread
1079 # basis rather than global. If this option is
1080 # disabled, some per-thread space can be saved.
1081 # Enabling this option will use three slots
1082 # of kernel per-thread data. You should ensure you
1083 # have enough slots configured for all your
1086 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1087 # This option is not active
1088 # ActiveIf constraint: CYGPKG_KERNEL
1089 # CYGPKG_KERNEL (unknown) == 0
1093 # No user value, uncomment the following line to provide one.
1095 # value_source default
1096 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1097 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1099 # Requires: CYGVAR_KERNEL_THREADS_DATA
1100 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1104 # Size of locale name strings
1105 # This option controls the maximum size of
1106 # locale names and is used, among other things
1107 # to instantiate a static string used
1108 # as a return value from the
1109 # setlocale() function. When requesting the
1110 # current locale settings with LC_ALL, a string
1111 # must be constructed to contain this data, rather
1112 # than just returning a constant string. This
1113 # string data is stored in the static string.
1114 # This depends on the length of locale names,
1115 # hence this option. If just the C locale is
1116 # present, this option can be set as low as 2.
1118 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1120 # No user value, uncomment the following line to provide one.
1122 # value_source default
1123 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1124 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1125 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1126 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1128 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1129 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1130 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1131 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1134 # Inline versions of <ctype.h> functions
1135 # This option chooses whether the simple character
1136 # classification and conversion functions (e.g.
1137 # isupper(), isalpha(), toupper(), etc.)
1138 # from <ctype.h> are available as inline
1139 # functions. This may improve performance and as
1140 # the functions are small, may even improve code
1143 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1145 # No user value, uncomment the following line to provide one.
1147 # value_source default
1149 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1150 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1154 # C library i18n functions build options
1155 # Package specific build options including control over
1156 # compiler flags used only in building this package,
1157 # and details of which tests are built.
1159 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1160 # There is no associated value.
1164 # Additional compiler flags
1165 # This option modifies the set of compiler flags for
1166 # building the C library. These flags are used in addition
1167 # to the set of global flags.
1169 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1171 # No user value, uncomment the following line to provide one.
1172 # user_value "-fno-rtti -Woverloaded-virtual"
1173 # value_source default
1174 # Default value: "-fno-rtti -Woverloaded-virtual"
1177 # Suppressed compiler flags
1178 # This option modifies the set of compiler flags for
1179 # building the C library. These flags are removed from
1180 # the set of global flags if present.
1182 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1184 # No user value, uncomment the following line to provide one.
1185 # user_value -Wno-pointer-sign
1186 # value_source default
1187 # Default value: -Wno-pointer-sign
1190 # C library i18n function tests
1191 # This option specifies the set of tests for the C library
1194 cdl_option CYGPKG_LIBC_I18N_TESTS {
1195 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1197 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1202 # ISO C library general utility functions
1203 # doc: ref/libc.html
1204 # This package provides general utility functions in <stdlib.h>
1205 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1207 cdl_package CYGPKG_LIBC_STDLIB {
1208 # Packages cannot be added or removed, nor can their version be changed,
1209 # simply by editing their value. Instead the appropriate configuration
1210 # should be used to perform these actions.
1212 # This value cannot be modified here.
1214 # Current value: 1 current
1215 # Requires: CYGPKG_ISOINFRA
1216 # CYGPKG_ISOINFRA == current
1218 # Requires: CYGINT_ISO_CTYPE
1219 # CYGINT_ISO_CTYPE == 1
1221 # Requires: CYGINT_ISO_STRING_STRFUNCS
1222 # CYGINT_ISO_STRING_STRFUNCS == 1
1227 # Inline versions of <stdlib.h> functions
1228 # This option chooses whether some of the
1229 # particularly simple standard utility functions
1230 # from <stdlib.h> are available as inline
1231 # functions. This may improve performance, and as
1232 # the functions are small, may even improve code
1235 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1236 # There is no associated value.
1242 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1244 # No user value, uncomment the following line to provide one.
1246 # value_source default
1248 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1249 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1255 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1257 # No user value, uncomment the following line to provide one.
1259 # value_source default
1261 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1262 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1266 # atof() / atoi() / atol()
1268 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1270 # No user value, uncomment the following line to provide one.
1272 # value_source default
1274 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1275 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1280 # Random number generation
1281 # These options control the behaviour of the
1282 # functions rand(), srand() and rand_r()
1284 cdl_component CYGPKG_LIBC_RAND {
1285 # There is no associated value.
1289 # Per-thread random seed
1290 # doc: ref/libc-thread-safety.html
1291 # This option controls whether the pseudo-random
1292 # number generation functions rand() and srand()
1293 # have their state recorded on a per-thread
1294 # basis rather than global. If this option is
1295 # disabled, some per-thread space can be saved.
1296 # Note there is also a POSIX-standard rand_r()
1297 # function to achieve a similar effect with user
1298 # support. Enabling this option will use one slot
1299 # of kernel per-thread data. You should ensure you
1300 # have enough slots configured for all your
1303 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1305 # No user value, uncomment the following line to provide one.
1307 # value_source default
1309 # Requires: CYGVAR_KERNEL_THREADS_DATA
1310 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1314 # Random number seed
1315 # This selects the initial random number seed for
1316 # rand()'s pseudo-random number generator. For
1317 # strict ISO standard compliance, this should be 1,
1318 # as per section 7.10.2.2 of the standard.
1320 cdl_option CYGNUM_LIBC_RAND_SEED {
1322 # No user value, uncomment the following line to provide one.
1324 # value_source default
1326 # Legal values: 0 to 0x7fffffff
1330 # Trace verbosity level for debugging the rand(),
1331 # srand() and rand_r() functions. Increase this
1332 # value to get additional trace output.
1334 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1336 # No user value, uncomment the following line to provide one.
1338 # value_source default
1340 # Legal values: 0 to 1
1343 # Simplest implementation
1344 # This provides a very simple implementation of rand()
1345 # that does not perform well with randomness in the
1346 # lower significant bits. However it is exceptionally
1347 # fast. It uses the sample algorithm from the ISO C
1350 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1352 # No user value, uncomment the following line to provide one.
1354 # value_source default
1358 # Simple implementation #1
1359 # This provides a very simple implementation of rand()
1360 # based on the simplest implementation above. However
1361 # it does try to work around the lack of randomness
1362 # in the lower significant bits, at the expense of a
1365 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1372 # Knuth implementation #1
1373 # This implements a slightly more complex algorithm
1374 # published in Donald E. Knuth's Art of Computer
1375 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1376 # This produces better random numbers than the
1377 # simplest approach but is slower.
1379 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1388 # This option allows use of the utility function
1389 # strtod() (and consequently atof()) to convert
1390 # from string to double precision floating point
1391 # numbers. Disabling this option removes the
1392 # dependency on the math library package.
1394 cdl_option CYGFUN_LIBC_strtod {
1396 # No user value, uncomment the following line to provide one.
1398 # value_source default
1399 # Default value: 0 != CYGPKG_LIBM
1400 # CYGPKG_LIBM (unknown) == 0
1402 # Requires: CYGPKG_LIBM
1403 # CYGPKG_LIBM (unknown) == 0
1407 # Provides long long conversion functions
1408 # Enabling this option will provide support for the strtoll(),
1409 # strtoull() and atoll() conversion functions, which are
1410 # the long long variants of the standard versions of these
1411 # functions. Supporting this requires extra code and compile
1414 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1421 # bsearch() tracing level
1422 # Trace verbosity level for debugging the <stdlib.h>
1423 # binary search function bsearch(). Increase this
1424 # value to get additional trace output.
1426 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1428 # No user value, uncomment the following line to provide one.
1430 # value_source default
1432 # Legal values: 0 to 1
1435 # qsort() tracing level
1436 # Trace verbosity level for debugging the <stdlib.h>
1437 # quicksort function qsort(). Increase this value
1438 # to get additional trace output.
1440 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1442 # No user value, uncomment the following line to provide one.
1444 # value_source default
1446 # Legal values: 0 to 1
1449 # C library stdlib build options
1450 # Package specific build options including control over
1451 # compiler flags used only in building this package,
1452 # and details of which tests are built.
1454 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1455 # There is no associated value.
1459 # Additional compiler flags
1460 # This option modifies the set of compiler flags for
1461 # building this package. These flags are used in addition
1462 # to the set of global flags.
1464 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1466 # No user value, uncomment the following line to provide one.
1467 # user_value "-fno-rtti -Woverloaded-virtual"
1468 # value_source default
1469 # Default value: "-fno-rtti -Woverloaded-virtual"
1472 # Suppressed compiler flags
1473 # This option modifies the set of compiler flags for
1474 # building this package. These flags are removed from
1475 # the set of global flags if present.
1477 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1479 # No user value, uncomment the following line to provide one.
1480 # user_value -Wno-pointer-sign
1481 # value_source default
1482 # Default value: -Wno-pointer-sign
1485 # C library stdlib tests
1486 # This option specifies the set of tests for this package.
1488 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1489 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1491 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1498 # doc: ref/the-ecos-hardware-abstraction-layer.html
1499 # The eCos HAL package provide a porting layer for
1500 # higher-level parts of the system such as the kernel and the
1501 # C library. Each installation should have HAL packages for
1502 # one or more architectures, and for each architecture there
1503 # may be one or more supported platforms. It is necessary to
1504 # select one target architecture and one platform for that
1505 # architecture. There are also a number of configuration
1506 # options that are common to all HAL packages.
1508 cdl_package CYGPKG_HAL {
1509 # Packages cannot be added or removed, nor can their version be changed,
1510 # simply by editing their value. Instead the appropriate configuration
1511 # should be used to perform these actions.
1513 # This value cannot be modified here.
1515 # Current value: 1 current
1516 # Requires: CYGPKG_INFRA
1517 # CYGPKG_INFRA == current
1520 # The following properties are affected by this value
1524 # Platform-independent HAL options
1525 # A number of configuration options are common to most or all
1526 # HAL packages, for example options controlling how much state
1527 # should be saved during a context switch. The implementations
1528 # of these options will vary from architecture to architecture.
1530 cdl_component CYGPKG_HAL_COMMON {
1531 # There is no associated value.
1535 # Provide eCos kernel support
1536 # The HAL can be configured to either support the full eCos
1537 # kernel, or to support only very simple applications which do
1538 # not require a full kernel. If kernel support is not required
1539 # then some of the startup, exception, and interrupt handling
1540 # code can be eliminated.
1542 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1544 # No user value, uncomment the following line to provide one.
1546 # value_source default
1547 # Default value: CYGPKG_KERNEL
1548 # CYGPKG_KERNEL (unknown) == 0
1550 # Requires: CYGPKG_KERNEL
1551 # CYGPKG_KERNEL (unknown) == 0
1555 # HAL exception support
1556 # When a processor exception occurs, for example an attempt to
1557 # execute an illegal instruction or to perform a divide by
1558 # zero, this exception may be handled in a number of different
1559 # ways. If the target system has gdb support then typically
1560 # the exception will be handled by gdb code. Otherwise if the
1561 # HAL exception support is enabled then the HAL will invoke a
1562 # routine deliver_exception(). Typically this routine will be
1563 # provided by the eCos kernel, but it is possible for
1564 # application code to provide its own implementation. If the
1565 # HAL exception support is not enabled and a processor
1566 # exception occurs then the behaviour of the system is
1569 cdl_option CYGPKG_HAL_EXCEPTIONS {
1571 # No user value, uncomment the following line to provide one.
1573 # value_source default
1574 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1575 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1577 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1578 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1582 # Stop calling constructors early
1583 # This option supports environments where some constructors
1584 # must be run in the context of a thread rather than at
1585 # simple system startup time. A boolean flag named
1586 # cyg_hal_stop_constructors is set to 1 when constructors
1587 # should no longer be invoked. It is up to some other
1588 # package to deal with the rest of the constructors.
1589 # In the current version this is only possible with the
1592 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1594 # No user value, uncomment the following line to provide one.
1596 # value_source default
1598 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1599 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1603 # HAL uses the MMU and allows for CDL manipulation of it's use
1605 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1606 # No options implement this inferface
1607 # This value cannot be modified here.
1611 # The following properties are affected by this value
1612 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1613 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1616 # Install MMU tables.
1617 # This option controls whether this application installs
1618 # its own Memory Management Unit (MMU) tables, or relies on the
1619 # existing environment to run.
1621 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1622 # This option is not active
1623 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1624 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1628 # No user value, uncomment the following line to provide one.
1630 # value_source default
1631 # Default value: CYG_HAL_STARTUP != "RAM"
1632 # CYG_HAL_STARTUP == ROMRAM
1635 # The following properties are affected by this value
1636 # option CYGSEM_HAL_STATIC_MMU_TABLES
1637 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1640 # Use static MMU tables.
1641 # This option defines an environment where any Memory
1642 # Management Unit (MMU) tables are constant. Normally used by ROM
1643 # based environments, this provides a way to save RAM usage which
1644 # would otherwise be required for these tables.
1646 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1648 # No user value, uncomment the following line to provide one.
1650 # value_source default
1652 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1653 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1657 # Route diagnostic output to debug channel
1658 # If not inheriting the console setup from the ROM monitor,
1659 # it is possible to redirect diagnostic output to the debug
1660 # channel by enabling this option. Depending on the debugger
1661 # used it may also be necessary to select a mangler for the
1662 # output to be displayed by the debugger.
1664 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1665 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1666 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1668 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1669 # CYGPKG_HAL_ARM == current
1670 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1671 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1672 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1676 # No user value, uncomment the following line to provide one.
1678 # value_source default
1679 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1680 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1681 # CYG_HAL_STARTUP == ROMRAM
1684 # The following properties are affected by this value
1685 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1686 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1690 # Mangler used on diag output
1691 # It is sometimes necessary to mangle (encode) the
1692 # diag ASCII text output in order for it to show up at the
1693 # other end. In particular, GDB may silently ignore raw
1696 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1697 # This option is not active
1698 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1701 # No user value, uncomment the following line to provide one.
1703 # value_source default
1704 # Default value: GDB
1705 # Legal values: "GDB" "None"
1710 # HAL interrupt handling
1711 # A number of configuration options related to interrupt
1712 # handling are common to most or all HAL packages, even though
1713 # the implementations will vary from architecture to
1716 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1717 # There is no associated value.
1721 # Use separate stack for interrupts
1722 # When an interrupt occurs this interrupt can be handled either
1723 # on the current stack or on a separate stack maintained by the
1724 # HAL. Using a separate stack requires a small number of extra
1725 # instructions in the interrupt handling code, but it has the
1726 # advantage that it is no longer necessary to allow extra space
1727 # in every thread stack for the interrupt handlers. The amount
1728 # of extra space required depends on the interrupt handlers
1729 # that are being used.
1731 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1733 # No user value, uncomment the following line to provide one.
1735 # The inferred value should not be edited directly.
1737 # value_source inferred
1740 # The following properties are affected by this value
1741 # package CYGPKG_REDBOOT
1742 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1745 # Interrupt stack size
1746 # This configuration option specifies the stack size in bytes
1747 # for the interrupt stack. Typically this should be a multiple
1748 # of 16, but the exact requirements will vary from architecture
1749 # to architecture. The interrupt stack serves two separate
1750 # purposes. It is used as the stack during system
1751 # initialization. In addition, if the interrupt system is
1752 # configured to use a separate stack then all interrupts will
1753 # be processed on this stack. The exact memory requirements
1754 # will vary from application to application, and will depend
1755 # heavily on whether or not other interrupt-related options,
1756 # for example nested interrupts, are enabled. On most targets,
1757 # in a configuration with no kernel this stack will also be
1758 # the stack used to invoke the application, and must obviously
1759 # be appropriately large in that case.
1761 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1763 # No user value, uncomment the following line to provide one.
1765 # value_source default
1766 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1767 # CYGPKG_KERNEL (unknown) == 0
1769 # Legal values: 128 to 1048576
1772 # Allow nested interrupts
1773 # When an interrupt occurs the HAL interrupt handling code can
1774 # either leave interrupts disabled for the duration of the
1775 # interrupt handling code, or by doing some extra work it can
1776 # reenable interrupts before invoking the interrupt handler and
1777 # thus allow nested interrupts to happen. If all the interrupt
1778 # handlers being used are small and do not involve any loops
1779 # then it is usually better to disallow nested interrupts.
1780 # However if any of the interrupt handlers are more complicated
1781 # than nested interrupts will usually be required.
1783 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1785 # No user value, uncomment the following line to provide one.
1787 # value_source default
1791 # Save minimum context on interrupt
1792 # The HAL interrupt handling code can exploit the calling conventions
1793 # defined for a given architecture to reduce the amount of state
1794 # that has to be saved. Generally this improves performance and
1795 # reduces code size. However it can make source-level debugging
1798 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1800 # No user value, uncomment the following line to provide one.
1802 # The inferred value should not be edited directly.
1804 # value_source inferred
1807 # The following properties are affected by this value
1808 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1809 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1810 # component CYGBLD_BUILD_REDBOOT
1811 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1814 # Chain all interrupts together
1815 # Interrupts can be attached to vectors either singly, or be
1816 # chained together. The latter is necessary if there is no way
1817 # of discovering which device has interrupted without
1818 # inspecting the device itself. It can also reduce the amount
1819 # of RAM needed for interrupt decoding tables and code.
1821 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1823 # No user value, uncomment the following line to provide one.
1825 # value_source default
1829 # Ignore spurious [fleeting] interrupts
1830 # On some hardware, interrupt sources may not be de-bounced or
1831 # de-glitched. Rather than try to handle these interrupts (no
1832 # handling may be possible), this option allows the HAL to simply
1833 # ignore them. In most cases, if the interrupt is real it will
1834 # reoccur in a detectable form.
1836 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1838 # No user value, uncomment the following line to provide one.
1840 # value_source default
1845 # HAL context switch support
1846 # A number of configuration options related to thread contexts
1847 # are common to most or all HAL packages, even though the
1848 # implementations will vary from architecture to architecture.
1850 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1851 # There is no associated value.
1853 # The following properties are affected by this value
1857 # Use minimum thread context
1858 # The thread context switch code can exploit the calling
1859 # conventions defined for a given architecture to reduce the
1860 # amount of state that has to be saved during a context
1861 # switch. Generally this improves performance and reduces
1862 # code size. However it can make source-level debugging more
1865 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1867 # No user value, uncomment the following line to provide one.
1869 # The inferred value should not be edited directly.
1871 # value_source inferred
1874 # The following properties are affected by this value
1875 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1876 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1877 # component CYGBLD_BUILD_REDBOOT
1878 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1882 # Explicit control over cache behaviour
1883 # These options let the default behaviour of the caches
1884 # be easily configurable.
1886 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1887 # There is no associated value.
1891 # Enable DATA cache on startup
1892 # Enabling this option will cause the data cache to be enabled
1893 # as soon as practicable when eCos starts up. One would choose
1894 # to disable this if the data cache cannot safely be turned on,
1895 # such as a case where the cache(s) require additional platform
1898 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1900 # No user value, uncomment the following line to provide one.
1902 # value_source default
1907 # DATA cache mode on startup
1908 # This option controls the mode the cache will be set to
1909 # when enabled on startup.
1911 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1913 # No user value, uncomment the following line to provide one.
1914 # user_value COPYBACK
1915 # value_source default
1916 # Default value: COPYBACK
1917 # Legal values: "COPYBACK" "WRITETHRU"
1921 # Enable INSTRUCTION cache on startup
1922 # Enabling this option will cause the instruction cache to be enabled
1923 # as soon as practicable when eCos starts up. One would choose
1924 # to disable this if the instruction cache cannot safely be turned on,
1925 # such as a case where the cache(s) require additional platform
1928 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1930 # No user value, uncomment the following line to provide one.
1932 # value_source default
1937 # Source-level debugging support
1938 # If the source level debugger gdb is to be used for debugging
1939 # application code then it may be necessary to configure in support
1940 # for this in the HAL.
1942 cdl_component CYGPKG_HAL_DEBUG {
1943 # There is no associated value.
1947 # Support for GDB stubs
1948 # The HAL implements GDB stubs for the target.
1950 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1951 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
1952 # This value cannot be modified here.
1956 # The following properties are affected by this value
1957 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1958 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1959 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1960 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1963 # Include GDB stubs in HAL
1964 # This option causes a set of GDB stubs to be included into the
1965 # system. On some target systems the GDB support will be
1966 # provided by other means, for example by a ROM monitor. On
1967 # other targets, especially when building a ROM-booting system,
1968 # the necessary support has to go into the target library
1969 # itself. When GDB stubs are include in a configuration, HAL
1970 # serial drivers must also be included.
1972 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1973 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1974 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1978 # No user value, uncomment the following line to provide one.
1980 # The inferred value should not be edited directly.
1982 # value_source inferred
1984 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
1985 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1987 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1988 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
1990 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1991 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
1993 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1994 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1995 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1998 # The following properties are affected by this value
1999 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2000 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2001 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2002 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2003 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2004 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2005 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2006 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2007 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2008 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2009 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2010 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2011 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2012 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2013 # option CYGPKG_HAL_GDB_FILEIO
2014 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2015 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2016 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2017 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2018 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2019 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2020 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2023 # Support for external break support in GDB stubs
2024 # The HAL implements external break (or asynchronous interrupt)
2025 # in the GDB stubs for the target.
2027 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2028 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
2029 # This value cannot be modified here.
2033 # The following properties are affected by this value
2034 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2035 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2038 # Include GDB external break support for stubs
2039 # This option causes the GDB stub to add a serial interrupt handler
2040 # which will listen for GDB break packets. This lets you stop the
2041 # target asynchronously when using GDB, usually by hitting Control+C
2042 # or pressing the STOP button. This option differs from
2043 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2044 # GDB stubs are present.
2046 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2047 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2048 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2052 # No user value, uncomment the following line to provide one.
2054 # value_source default
2055 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2056 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2058 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2059 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2062 # The following properties are affected by this value
2063 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2064 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2065 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2066 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2067 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2068 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2071 # Platform does not support CTRLC
2073 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2074 # No options implement this inferface
2075 # This value cannot be modified here.
2079 # The following properties are affected by this value
2080 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2081 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2084 # Include GDB external break support when no stubs
2085 # This option adds an interrupt handler for the GDB serial line
2086 # which will listen for GDB break packets. This lets you stop the
2087 # target asynchronously when using GDB, usually by hitting Control+C
2088 # or pressing the STOP button. This option differs from
2089 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2090 # stubs are NOT present.
2092 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2093 # This option is not active
2094 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2095 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2096 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2098 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2099 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2103 # No user value, uncomment the following line to provide one.
2105 # value_source default
2106 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2107 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2109 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2110 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2113 # The following properties are affected by this value
2114 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2115 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2116 # component CYGBLD_BUILD_REDBOOT
2117 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2120 # Include GDB multi-threading debug support
2121 # This option enables some extra HAL code which is needed
2122 # to support multi-threaded source level debugging.
2124 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2125 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2126 # CYGSEM_HAL_ROM_MONITOR == 1
2127 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2131 # No user value, uncomment the following line to provide one.
2133 # value_source default
2136 # The following properties are affected by this value
2137 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2138 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2139 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2140 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2143 # Number of times to retry sending a $O packet
2144 # This option controls the number of attempts that eCos programs
2145 # will make to send a $O packet to a host GDB process. If it is
2146 # set non-zero, then the target process will attempt to resend the
2147 # $O packet data up to this number of retries. Caution: use of
2148 # this option is not recommended as it can thoroughly confuse the
2151 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2153 # No user value, uncomment the following line to provide one.
2155 # value_source default
2159 # Timeout period for GDB packets
2160 # This option controls the time (in milliseconds) that eCos programs
2161 # will wait for a response when sending packets to a host GDB process.
2162 # If this time elapses, then the packet will be resent, up to some
2163 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2165 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2167 # No user value, uncomment the following line to provide one.
2169 # value_source default
2170 # Default value: 500
2173 # Location of CRC32 table
2174 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2175 # and placed in ROM, or generated at runtime in RAM. Depending on
2176 # your memory constraints, one of these options may be better.
2178 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2180 # No user value, uncomment the following line to provide one.
2182 # value_source default
2183 # Default value: RAM
2184 # Legal values: "ROM" "RAM"
2188 # ROM monitor support
2189 # Support for ROM monitors can be built in to your application.
2190 # It may also be relevant to build your application as a ROM monitor
2191 # itself. Such options are contained here if relevant for your chosen
2192 # platform. The options and ROM monitors available to choose are
2193 # platform-dependent.
2195 cdl_component CYGPKG_HAL_ROM_MONITOR {
2196 # There is no associated value.
2198 # The following properties are affected by this value
2202 # Target has virtual vector support
2204 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2205 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
2206 # This value cannot be modified here.
2210 # The following properties are affected by this value
2211 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2212 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2215 # Target supports baud rate control via vectors
2216 # Whether this target supports the __COMMCTL_GETBAUD
2217 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2219 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2220 # Implemented by CYGPKG_HAL_ARM_MX27, active, enabled
2221 # This value cannot be modified here.
2225 # The following properties are affected by this value
2226 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2227 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2230 # Enable use of virtual vector calling interface
2231 # Virtual vector support allows the HAL to let the ROM
2232 # monitor handle certain operations. The virtual vector table
2233 # defines a calling interface between applications running in
2234 # RAM and the ROM monitor.
2236 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2237 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2238 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2241 # Calculated value: 1
2245 # The following properties are affected by this value
2246 # component CYGBLD_BUILD_REDBOOT
2247 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2248 # package CYGPKG_DEVS_ETH_PHY
2249 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2253 # Inherit console settings from ROM monitor
2254 # When this option is set, the application will inherit
2255 # the console as set up by the ROM monitor. This means
2256 # that the application will use whatever channel and
2257 # mangling style was used by the ROM monitor when
2258 # the application was launched.
2260 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2261 # This option is not active
2262 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2263 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2267 # No user value, uncomment the following line to provide one.
2269 # value_source default
2270 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2271 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2274 # The following properties are affected by this value
2275 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2276 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2277 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2278 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2281 # Debug channel is configurable
2282 # This option is a configuration hint - it is enabled
2283 # when the HAL initialization code will make use
2284 # of the debug channel configuration option.
2286 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2287 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2288 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2292 # The following properties are affected by this value
2293 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2294 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2297 # Console channel is configurable
2298 # This option is a configuration hint - it is enabled
2299 # when the HAL initialization code will make use
2300 # of the console channel configuration option.
2302 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2303 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2304 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2305 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2309 # The following properties are affected by this value
2310 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2311 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2314 # Initialize whole of virtual vector table
2315 # This option will cause the whole of the virtual
2316 # vector table to be initialized with dummy values on
2317 # startup. When this option is enabled, all the
2318 # options below must also be enabled - or the
2319 # table would be empty when the application
2321 # On targets where older ROM monitors without
2322 # virtual vector support may still be in use, it is
2323 # necessary for RAM applictions to initialize the
2324 # table (since all HAL diagnostics and debug IO
2325 # happens via the table).
2327 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2329 # No user value, uncomment the following line to provide one.
2331 # value_source default
2332 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2333 # CYG_HAL_STARTUP == ROMRAM
2334 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2336 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2337 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2339 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2340 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2342 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2343 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2345 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2346 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2348 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2349 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2352 # The following properties are affected by this value
2353 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2354 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2355 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2356 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2357 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2358 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2359 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2360 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2361 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2362 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2363 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2364 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2365 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2366 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2369 # Claim virtual vector table entries by default
2370 # By default most virtual vectors will be claimed by
2371 # RAM startup configurations, meaning that the RAM
2372 # application will provide the services. The
2373 # exception is COMMS support (HAL
2374 # diagnostics/debugging IO) which is left in the
2375 # control of the ROM monitor.
2376 # The reasoning behind this is to get as much of the
2377 # code exercised during regular development so it
2378 # is known to be working the few times a new ROM
2379 # monitor or a ROM production configuration is used
2380 # - COMMS are excluded only by necessity in order to
2381 # avoid breaking an existing debugger connections
2382 # (there may be ways around this).
2383 # For production RAM configurations this option can
2384 # be switched off, causing the appliction to rely on
2385 # the ROM monitor for these services, thus
2386 # saving some space.
2387 # Individual vectors may also be left unclaimed,
2388 # controlled by the below options (meaning that the
2389 # associated service provided by the ROM monitor
2392 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2393 # This option is not active
2394 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2395 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2399 # No user value, uncomment the following line to provide one.
2401 # value_source default
2404 # The following properties are affected by this value
2405 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2406 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2407 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2408 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2409 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2410 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2411 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2412 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2415 # Claim reset virtual vectors
2416 # This option will cause the reset and kill_by_reset
2417 # virtual vectors to be claimed.
2419 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2421 # No user value, uncomment the following line to provide one.
2423 # value_source default
2424 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2425 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2426 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2429 # The following properties are affected by this value
2430 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2431 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2434 # Claim version virtual vectors
2435 # This option will cause the version
2436 # virtual vectors to be claimed.
2438 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2440 # No user value, uncomment the following line to provide one.
2442 # value_source default
2443 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2444 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2448 # Claim delay_us virtual vector
2449 # This option will cause the delay_us
2450 # virtual vector to be claimed.
2452 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2454 # No user value, uncomment the following line to provide one.
2456 # value_source default
2457 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2458 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2459 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2462 # The following properties are affected by this value
2463 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2464 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2467 # Claim cache virtual vectors
2468 # This option will cause the cache virtual vectors
2471 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2473 # No user value, uncomment the following line to provide one.
2475 # value_source default
2476 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2477 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2478 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2481 # The following properties are affected by this value
2482 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2483 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2486 # Claim data virtual vectors
2487 # This option will cause the data virtual vectors
2488 # to be claimed. At present there is only one, used
2489 # by the RedBoot ethernet driver to share diag output.
2491 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2493 # No user value, uncomment the following line to provide one.
2495 # value_source default
2496 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2497 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2498 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2501 # The following properties are affected by this value
2502 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2503 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2506 # Claim comms virtual vectors
2507 # This option will cause the communication tables
2508 # that are part of the virtual vectors mechanism to
2509 # be claimed. Note that doing this may cause an
2510 # existing ROM monitor communication connection to
2511 # be closed. For this reason, the option is disabled
2512 # per default for normal application
2515 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2517 # No user value, uncomment the following line to provide one.
2519 # value_source default
2520 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2521 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2522 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2525 # The following properties are affected by this value
2526 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2527 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2528 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2529 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2530 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2531 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2532 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2533 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2536 # Do diagnostic IO via virtual vector table
2537 # All HAL IO happens via the virtual vector table / comm
2538 # tables when those tables are supported by the HAL.
2539 # If so desired, the low-level IO functions can
2540 # still be provided by the RAM application by
2541 # enabling the CLAIM_COMMS option.
2543 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2544 # Calculated value: 1
2548 # The following properties are affected by this value
2549 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2550 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2551 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2552 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2556 # Behave as a ROM monitor
2557 # Enable this option if this program is to be used as a ROM monitor,
2558 # i.e. applications will be loaded into RAM on the TX27 module, and this
2559 # ROM monitor may process exceptions or interrupts generated from the
2560 # application. This enables features such as utilizing a separate
2561 # interrupt stack when exceptions are generated.
2563 cdl_option CYGSEM_HAL_ROM_MONITOR {
2565 # No user value, uncomment the following line to provide one.
2567 # The inferred value should not be edited directly.
2569 # value_source inferred
2571 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2572 # CYG_HAL_STARTUP == ROMRAM
2573 # CYG_HAL_STARTUP == ROMRAM
2576 # The following properties are affected by this value
2577 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2578 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2579 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2580 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2581 # option CYGPRI_REDBOOT_ROM_MONITOR
2582 # Requires: CYGSEM_HAL_ROM_MONITOR
2585 # Work with a ROM monitor
2586 # Support can be enabled for different varieties of ROM monitor.
2587 # This support changes various eCos semantics such as the encoding
2588 # of diagnostic output, or the overriding of hardware interrupt
2590 # Firstly there is "Generic" support which prevents the HAL
2591 # from overriding the hardware vectors that it does not use, to
2592 # instead allow an installed ROM monitor to handle them. This is
2593 # the most basic support which is likely to be common to most
2594 # implementations of ROM monitor.
2595 # "GDB_stubs" provides support when GDB stubs are included in
2596 # the ROM monitor or boot ROM.
2598 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2600 # No user value, uncomment the following line to provide one.
2602 # value_source default
2603 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2604 # CYG_HAL_STARTUP == ROMRAM
2606 # Legal values: "Generic" "GDB_stubs"
2607 # Requires: CYG_HAL_STARTUP == "RAM"
2608 # CYG_HAL_STARTUP == ROMRAM
2611 # The following properties are affected by this value
2612 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2613 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2614 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2615 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2616 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2617 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2618 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2619 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2623 # Platform defined I/O channels.
2624 # Platforms which provide additional I/O channels can implement
2625 # this interface, indicating that the function plf_if_init()
2626 # needs to be called.
2628 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2629 # No options implement this inferface
2630 # This value cannot be modified here.
2635 # Platform IDE I/O support.
2636 # Platforms which provide IDE controllers can implement
2637 # this interface, indicating that IDE I/O macros are
2640 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2641 # No options implement this inferface
2642 # This value cannot be modified here.
2646 # The following properties are affected by this value
2647 # component CYGSEM_REDBOOT_DISK_IDE
2648 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2651 # File I/O operations via GDB
2652 # This option enables support for various file I/O
2653 # operations using the GDB remote protocol to communicate
2654 # with GDB. The operations are then performed on the
2655 # debugging host by proxy. These operations are only
2656 # currently available by using a system call interface
2657 # to RedBoot. This may change in the future.
2659 cdl_option CYGPKG_HAL_GDB_FILEIO {
2660 # This option is not active
2661 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2662 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2666 # No user value, uncomment the following line to provide one.
2668 # value_source default
2670 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2671 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2675 # Build Compiler sanity checking tests
2676 # Enabling this option causes compiler tests to be built.
2678 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2680 # No user value, uncomment the following line to provide one.
2682 # value_source default
2685 # The following properties are affected by this value
2686 # component CYGPKG_HAL_TESTS
2687 # Calculated: "tests/context tests/basic"
2688 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2689 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2690 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2694 # This option specifies the set of tests for the common HAL.
2696 cdl_component CYGPKG_HAL_TESTS {
2697 # Calculated value: "tests/context tests/basic"
2698 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2699 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2700 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2701 # CYGINT_HAL_TESTS_NO_CACHES == 0
2702 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2703 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2705 # Current_value: tests/context tests/basic tests/cache tests/intr
2709 # Interface for cache presence
2710 # Some architectures and/or platforms do not have caches. By
2711 # implementing this interface, these can disable the various
2712 # cache-related tests.
2714 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2715 # No options implement this inferface
2716 # This value cannot be modified here.
2718 # Current value: 0 0
2720 # The following properties are affected by this value
2721 # component CYGPKG_HAL_TESTS
2722 # Calculated: "tests/context tests/basic"
2723 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2724 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2725 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2730 # The ARM architecture HAL package provides generic
2731 # support for this processor architecture. It is also
2732 # necessary to select a specific target platform HAL
2735 cdl_package CYGPKG_HAL_ARM {
2736 # Packages cannot be added or removed, nor can their version be changed,
2737 # simply by editing their value. Instead the appropriate configuration
2738 # should be used to perform these actions.
2740 # This value cannot be modified here.
2742 # Current value: 1 current
2744 # The following properties are affected by this value
2745 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2746 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2747 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2748 # ActiveIf: CYGPKG_HAL_ARM
2752 # The CPU architecture supports THUMB mode
2754 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2755 # No options implement this inferface
2756 # This value cannot be modified here.
2760 # The following properties are affected by this value
2761 # option CYGHWR_THUMB
2762 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2763 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2764 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2767 # Enable Thumb instruction set
2768 # Enable use of the Thumb instruction set.
2770 cdl_option CYGHWR_THUMB {
2771 # This option is not active
2772 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2773 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2777 # No user value, uncomment the following line to provide one.
2779 # value_source default
2782 # The following properties are affected by this value
2783 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2784 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2787 # Enable Thumb interworking compiler option
2788 # This option controls the use of -mthumb-interwork in the
2789 # compiler flags. It defaults enabled in Thumb or ROM monitor
2790 # configurations, but can be overridden for reduced memory
2791 # footprint where interworking is not a requirement.
2793 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2794 # This option is not active
2795 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2796 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2800 # No user value, uncomment the following line to provide one.
2802 # value_source default
2803 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2805 # CYGSEM_HAL_ROM_MONITOR == 1
2809 # The platform and architecture supports Big Endian operation
2811 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2812 # No options implement this inferface
2813 # This value cannot be modified here.
2817 # The following properties are affected by this value
2818 # option CYGHWR_HAL_ARM_BIGENDIAN
2819 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2822 # Use big-endian mode
2823 # Use the CPU in big-endian mode.
2825 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2826 # This option is not active
2827 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2828 # CYGINT_HAL_ARM_BIGENDIAN == 0
2832 # No user value, uncomment the following line to provide one.
2834 # value_source default
2838 # The platform uses a processor with an ARM7 core
2840 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2841 # No options implement this inferface
2842 # This value cannot be modified here.
2846 # The following properties are affected by this value
2847 # option CYGHWR_HAL_ARM_CPU_FAMILY
2848 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2849 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2850 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2851 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2853 # option CYGHWR_HAL_ARM_CPU_FAMILY
2854 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2855 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2856 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2857 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2861 # The platform uses a processor with an ARM9 core
2863 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2864 # Implemented by CYGPKG_HAL_ARM_MX27, active, enabled
2865 # This value cannot be modified here.
2869 # The following properties are affected by this value
2870 # option CYGHWR_HAL_ARM_CPU_FAMILY
2871 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2872 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2873 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2874 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2876 # option CYGHWR_HAL_ARM_CPU_FAMILY
2877 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2878 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2879 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2880 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2884 # The platform uses a processor with a StrongARM core
2886 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2887 # No options implement this inferface
2888 # This value cannot be modified here.
2892 # The following properties are affected by this value
2893 # option CYGHWR_HAL_ARM_CPU_FAMILY
2894 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2895 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2896 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2897 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2899 # option CYGHWR_HAL_ARM_CPU_FAMILY
2900 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2901 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2902 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2903 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2907 # The platform uses a processor with a XScale core
2909 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2910 # No options implement this inferface
2911 # This value cannot be modified here.
2915 # The following properties are affected by this value
2916 # option CYGHWR_HAL_ARM_CPU_FAMILY
2917 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2918 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2919 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2920 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2922 # option CYGHWR_HAL_ARM_CPU_FAMILY
2923 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2924 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2925 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2926 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2931 # It is possible to optimize code for different
2932 # ARM CPU families. This option selects which CPU to
2933 # optimize for on boards that support multiple CPU types.
2935 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2937 # No user value, uncomment the following line to provide one.
2939 # value_source default
2940 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2941 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2942 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2943 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2945 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2946 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2947 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2948 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2950 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2951 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2952 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2953 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2955 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2956 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2957 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2958 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2961 # Provide diagnostic dump for exceptions
2962 # Print messages about hardware exceptions, including
2963 # raw exception frame dump and register contents.
2965 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2967 # No user value, uncomment the following line to provide one.
2969 # value_source default
2971 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2972 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2976 # Process all exceptions with the eCos application
2977 # Normal RAM-based programs which do not include GDB stubs
2978 # defer processing of the illegal instruction exception to GDB.
2979 # Setting this options allows the program to explicitly handle
2980 # the illegal instruction exception itself. Note: this will
2981 # prevent the use of GDB to debug the application as breakpoints
2982 # will no longer work.
2984 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
2986 # No user value, uncomment the following line to provide one.
2988 # value_source default
2992 # Support GDB thread operations via ICE/Multi-ICE
2993 # Allow GDB to get thread information via the ICE/Multi-ICE
2996 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
2998 # No user value, uncomment the following line to provide one.
3000 # value_source default
3002 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3003 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3005 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3006 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3008 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3009 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3013 # Support for 'gprof' callbacks
3014 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3015 # to acquire the interrupt-context PC and SP, when this option is
3018 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3019 # This option is not active
3020 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3021 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3023 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3024 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3025 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3028 # Calculated value: 1
3033 # Accept exceptions and irq's occurring in user mode
3034 # For standalone Redboot based programs running in user mode.
3036 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3038 # No user value, uncomment the following line to provide one.
3040 # value_source default
3044 # Preserve svc spsr before returning to svc mode
3045 # This option secures exception and breakpoint processing
3046 # triggered during execution of application specific SWI
3049 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3051 # No user value, uncomment the following line to provide one.
3053 # value_source default
3059 cdl_option CYGBLD_LINKER_SCRIPT {
3060 # Calculated value: "src/arm.ld"
3062 # Current_value: src/arm.ld
3065 # Implementations of hal_arm_mem_real_region_top()
3067 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3068 # No options implement this inferface
3069 # This value cannot be modified here.
3074 # Freescale SoC architecture
3075 # This HAL variant package provides generic
3076 # support for the Freescale SoC. It is also
3077 # necessary to select a specific target platform HAL
3080 cdl_package CYGPKG_HAL_ARM_MX27 {
3081 # Packages cannot be added or removed, nor can their version be changed,
3082 # simply by editing their value. Instead the appropriate configuration
3083 # should be used to perform these actions.
3085 # This value cannot be modified here.
3087 # Current value: 1 current
3089 # The following properties are affected by this value
3094 # The processor can run at various frequencies.
3095 # These values are expressed in KHz. Note that there are
3096 # several steppings of the rate to run at different
3097 # maximum frequencies. Check the specs to make sure that your
3098 # particular processor can run at the rate you select here.
3100 cdl_option CYGHWR_HAL_ARM_SOC_PLL_REF_CLOCK {
3102 # No user value, uncomment the following line to provide one.
3103 # user_value 26000000
3104 # value_source default
3105 # Default value: 26000000
3106 # Legal values: 26000000 27000000 33554432 32768000
3109 # Processor clock rate
3110 # The processor can run at various frequencies.
3111 # These values are expressed in KHz. Note that there are
3112 # several steppings of the rate to run at different
3113 # maximum frequencies. Check the specs to make sure that your
3114 # particular processor can run at the rate you select here.
3116 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3118 # No user value, uncomment the following line to provide one.
3120 # value_source default
3121 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3122 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 399
3123 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3124 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3126 # Legal values: 266 399
3129 # System clock (hclk) rate
3130 # The processor can run at various frequencies.
3131 # These values are expressed in KHz. Note that there are
3132 # several steppings of the rate to run at different
3133 # maximum frequencies. Check the specs to make sure that your
3134 # particular processor can run at the rate you select here.
3136 cdl_option CYGHWR_HAL_ARM_SOC_SYSTEM_CLOCK {
3138 # No user value, uncomment the following line to provide one.
3140 # value_source default
3141 # Default value: 133
3142 # Legal values: 133 100
3145 # Real-time clock constants
3147 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3148 # There is no associated value.
3152 # Real-time clock numerator
3154 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3155 # Calculated value: 1000000000
3157 # Current_value: 1000000000
3160 # Real-time clock denominator
3161 # This option selects the heartbeat rate for the real-time clock.
3162 # The rate is specified in ticks per second. Change this value
3163 # with caution - too high and your system will become saturated
3164 # just handling clock interrupts, too low and some operations
3165 # such as thread scheduling may become sluggish.
3167 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3169 # No user value, uncomment the following line to provide one.
3171 # value_source default
3172 # Default value: 100
3174 # The following properties are affected by this value
3175 # option CYGNUM_HAL_RTC_PERIOD
3176 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3179 # Real-time clock period
3181 cdl_option CYGNUM_HAL_RTC_PERIOD {
3182 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3183 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3185 # Current_value: 36864
3189 # UART1 available as diagnostic/debug channel
3190 # The chip has multiple serial channels which may be
3191 # used for different things on different platforms. This
3192 # interface allows a platform to indicate that the specified
3193 # serial port can be used as a diagnostic and/or debug channel.
3195 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3196 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3197 # This value cannot be modified here.
3201 # The following properties are affected by this value
3204 # UART2 available as diagnostic/debug channel
3205 # The chip has multiple serial channels which may be
3206 # used for different things on different platforms. This
3207 # interface allows a platform to indicate that the specified
3208 # serial port can be used as a diagnostic and/or debug channel.
3210 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3211 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3212 # This value cannot be modified here.
3216 # The following properties are affected by this value
3219 # UART3 available as diagnostic/debug channel
3220 # The chip has multiple serial channels which may be
3221 # used for different things on different platforms. This
3222 # interface allows a platform to indicate that the specified
3223 # serial port can be used as a diagnostic and/or debug channel.
3225 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3226 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3227 # This value cannot be modified here.
3231 # The following properties are affected by this value
3234 # UART4 available as diagnostic/debug channel
3235 # The chip has multiple serial channels which may be
3236 # used for different things on different platforms. This
3237 # interface allows a platform to indicate that the specified
3238 # serial port can be used as a diagnostic and/or debug channel.
3240 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3241 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3242 # This value cannot be modified here.
3246 # The following properties are affected by this value
3249 # UART5 available as diagnostic/debug channel
3250 # The chip has multiple serial channels which may be
3251 # used for different things on different platforms. This
3252 # interface allows a platform to indicate that the specified
3253 # serial port can be used as a diagnostic and/or debug channel.
3255 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3256 # No options implement this inferface
3257 # This value cannot be modified here.
3262 # UART6 available as diagnostic/debug channel
3263 # The chip has multiple serial channels which may be
3264 # used for different things on different platforms. This
3265 # interface allows a platform to indicate that the specified
3266 # serial port can be used as a diagnostic and/or debug channel.
3268 cdl_interface CYGHWR_HAL_ARM_SOC_UART6 {
3269 # No options implement this inferface
3270 # This value cannot be modified here.
3276 # This HAL platform package provides generic
3277 # support for the Ka-Ro electronics TX27 module.
3279 cdl_package CYGPKG_HAL_ARM_TX27KARO {
3280 # Packages cannot be added or removed, nor can their version be changed,
3281 # simply by editing their value. Instead the appropriate configuration
3282 # should be used to perform these actions.
3284 # This value cannot be modified here.
3286 # Current value: 1 current
3287 # Requires: CYGINT_ISO_CTYPE
3288 # CYGINT_ISO_CTYPE == 1
3290 # Requires: CYGBLD_BUILD_REDBOOT == 1
3291 # CYGBLD_BUILD_REDBOOT == 1
3297 # The only startup type allowed is ROMRAM, since this will allow
3298 # the program to exist in ROM, but be copied to RAM during startup
3299 # which is required to boot from NAND flash.
3301 cdl_component CYG_HAL_STARTUP {
3303 # No user value, uncomment the following line to provide one.
3305 # value_source default
3306 # Default value: ROMRAM
3307 # Legal values: "ROMRAM"
3309 # The following properties are affected by this value
3310 # option CYGSEM_HAL_ROM_MONITOR
3311 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3312 # option CYGSEM_HAL_ROM_MONITOR
3313 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3314 # option CYGSEM_HAL_USE_ROM_MONITOR
3315 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3316 # option CYGSEM_HAL_USE_ROM_MONITOR
3317 # Requires: CYG_HAL_STARTUP == "RAM"
3318 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3319 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3320 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3321 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3322 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3323 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3324 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3325 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3326 # option CYGPRI_REDBOOT_ROM_MONITOR
3327 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3328 # option CYGPRI_REDBOOT_ROM_MONITOR
3329 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3332 # Diagnostic serial port baud rate
3333 # This option selects the baud rate used for the console port.
3334 # Note: this should match the value chosen for the GDB port if the
3335 # console and GDB port are the same.
3337 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3339 # No user value, uncomment the following line to provide one.
3341 # value_source default
3342 # Default value: 115200
3343 # Legal values: 9600 19200 38400 57600 115200
3346 # GDB serial port baud rate
3347 # This option selects the baud rate used for the GDB port.
3348 # Note: this should match the value chosen for the console port if the
3349 # console and GDB port are the same.
3351 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3353 # No user value, uncomment the following line to provide one.
3355 # value_source default
3356 # Default value: 115200
3357 # Legal values: 9600 19200 38400 57600 115200
3360 # Number of communication channels on the TX27
3362 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3363 # Calculated value: 3
3367 # The following properties are affected by this value
3368 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3369 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3370 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3371 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3372 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3373 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3377 # The TX27 provides access to three serial ports. This option
3378 # chooses which port will be used to connect to a host
3381 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3382 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3383 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3387 # No user value, uncomment the following line to provide one.
3389 # value_source default
3391 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3392 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3395 # Default console channel.
3397 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3398 # Calculated value: 0
3401 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3402 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3404 # The following properties are affected by this value
3405 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3406 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3409 # Console serial port
3410 # The TX27 provides access to three serial ports. This option
3411 # chooses which port will be used for console output.
3413 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3414 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3415 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3419 # No user value, uncomment the following line to provide one.
3421 # value_source default
3422 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3423 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3425 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3426 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3429 # Ka-Ro electronics TX27 module build options
3430 # Package specific build options including control over
3431 # compiler flags used only in building this package,
3432 # and details of which tests are built.
3434 cdl_component CYGPKG_HAL_ARM_TX27_OPTIONS {
3435 # There is no associated value.
3436 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3437 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3443 # This option specifies the SDRAM size of the TX27 module.
3445 cdl_option CYGNUM_HAL_ARM_TX27_SDRAM_SIZE {
3447 user_value 0x08000000
3449 # Default value: 0x04000000
3450 # Legal values: 0x04000000 0x08000000
3453 # Enable low level debugging with LED
3454 # This option enables low level debugging by blink codes
3455 # of the LED on STK5.
3457 cdl_option CYGOPT_HAL_ARM_TX27_DEBUG {
3459 # No user value, uncomment the following line to provide one.
3461 # value_source default
3462 # Default value: false
3463 # false (unknown) == 0
3467 # Additional compiler flags
3468 # This option modifies the set of compiler flags for
3469 # building the TX27 HAL. These flags are used in addition
3470 # to the set of global flags.
3472 cdl_option CYGPKG_HAL_ARM_TX27_CFLAGS_ADD {
3474 # No user value, uncomment the following line to provide one.
3476 # value_source default
3480 # Suppressed compiler flags
3481 # This option modifies the set of compiler flags for
3482 # building the TX27 HAL. These flags are removed from
3483 # the set of global flags if present.
3485 cdl_option CYGPKG_HAL_ARM_TX27_CFLAGS_REMOVE {
3487 # No user value, uncomment the following line to provide one.
3489 # value_source default
3496 cdl_component CYGHWR_MEMORY_LAYOUT {
3497 # Calculated value: "arm_tx27_romram"
3499 # Current_value: arm_tx27_romram
3503 # Memory layout linker script fragment
3505 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3506 # Calculated value: "<pkgconf/mlt_arm_tx27_romram.ldi>"
3508 # Current_value: <pkgconf/mlt_arm_tx27_romram.ldi>
3511 # Memory layout header file
3513 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3514 # Calculated value: "<pkgconf/mlt_arm_tx27_romram.h>"
3516 # Current_value: <pkgconf/mlt_arm_tx27_romram.h>
3525 # Common types and useful macros.
3526 # Tracing and assertion facilities.
3527 # Package startup options.
3529 cdl_package CYGPKG_INFRA {
3530 # Packages cannot be added or removed, nor can their version be changed,
3531 # simply by editing their value. Instead the appropriate configuration
3532 # should be used to perform these actions.
3534 # This value cannot be modified here.
3536 # Current value: 1 current
3538 # The following properties are affected by this value
3539 # package CYGPKG_HAL
3540 # Requires: CYGPKG_INFRA
3541 # component CYGBLD_BUILD_REDBOOT
3542 # Requires: CYGPKG_INFRA
3547 # The eCos source code contains a significant amount of
3548 # internal debugging support, in the form of assertions and
3550 # Assertions check at runtime that various conditions are as
3551 # expected; if not, execution is halted.
3552 # Tracing takes the form of text messages that are output
3553 # whenever certain events occur, or whenever functions are
3555 # The most important property of these checks and messages is
3556 # that they are not required for the program to run.
3557 # It is prudent to develop software with assertions enabled,
3558 # but disable them when making a product release, thus
3559 # removing the overhead of that checking.
3560 # It is possible to enable assertions and tracing
3562 # There are also options controlling the exact behaviour of
3563 # the assertion and tracing facilities, thus giving users
3564 # finer control over the code and data size requirements.
3566 cdl_component CYGPKG_INFRA_DEBUG {
3568 # No user value, uncomment the following line to provide one.
3570 # value_source default
3573 # The following properties are affected by this value
3574 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3575 # ActiveIf: CYGPKG_INFRA_DEBUG
3580 # If this option is defined, asserts in the code are tested.
3581 # Assert functions (CYG_ASSERT()) are defined in
3582 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3583 # If it is not defined, these result in no additional
3584 # object code and no checking of the asserted conditions.
3586 cdl_component CYGDBG_USE_ASSERTS {
3587 # This option is not active
3588 # The parent CYGPKG_INFRA_DEBUG is disabled
3591 # No user value, uncomment the following line to provide one.
3593 # value_source default
3595 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3596 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3599 # The following properties are affected by this value
3600 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3601 # Requires: CYGDBG_USE_ASSERTS
3602 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3603 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3608 # This option allows individual control of preconditions.
3609 # A precondition is one type of assert, which it is
3610 # useful to control separately from more general asserts.
3611 # The function is CYG_PRECONDITION(condition,msg).
3613 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3614 # This option is not active
3615 # The parent CYGDBG_USE_ASSERTS is not active
3618 # No user value, uncomment the following line to provide one.
3620 # value_source default
3625 # This option allows individual control of postconditions.
3626 # A postcondition is one type of assert, which it is
3627 # useful to control separately from more general asserts.
3628 # The function is CYG_POSTCONDITION(condition,msg).
3630 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3631 # This option is not active
3632 # The parent CYGDBG_USE_ASSERTS is not active
3635 # No user value, uncomment the following line to provide one.
3637 # value_source default
3642 # This option allows individual control of loop invariants.
3643 # A loop invariant is one type of assert, which it is
3644 # useful to control separately from more general asserts,
3645 # particularly since a loop invariant is typically evaluated
3646 # a great many times when used correctly.
3647 # The function is CYG_LOOP_INVARIANT(condition,msg).
3649 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3650 # This option is not active
3651 # The parent CYGDBG_USE_ASSERTS is not active
3654 # No user value, uncomment the following line to provide one.
3656 # value_source default
3661 # All assertions within eCos contain a text message
3662 # which should give some information about the condition
3664 # These text messages will end up being embedded in the
3665 # application image and hence there is a significant penalty
3666 # in terms of image size.
3667 # It is possible to suppress the use of these messages by
3668 # disabling this option.
3669 # This results in smaller code size, but there is less
3670 # human-readable information if an assertion actually gets
3673 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3674 # This option is not active
3675 # The parent CYGDBG_USE_ASSERTS is not active
3678 # No user value, uncomment the following line to provide one.
3680 # value_source default
3686 # If this option is defined, tracing operations
3687 # result in output or logging, depending on other options.
3688 # This may have adverse effects on performance, if the time
3689 # taken to output message overwhelms the available CPU
3690 # power or output bandwidth.
3691 # Trace functions (CYG_TRACE()) are defined in
3692 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3693 # If it is not defined, these result in no additional
3694 # object code and no trace information.
3696 cdl_component CYGDBG_USE_TRACING {
3697 # This option is not active
3698 # The parent CYGPKG_INFRA_DEBUG is disabled
3701 # No user value, uncomment the following line to provide one.
3703 # value_source default
3705 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3706 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3709 # The following properties are affected by this value
3710 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3711 # ActiveIf: CYGDBG_USE_TRACING
3712 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3713 # ActiveIf: CYGDBG_USE_TRACING
3714 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3715 # ActiveIf: CYGDBG_USE_TRACING
3716 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3717 # ActiveIf: CYGDBG_USE_TRACING
3718 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3719 # ActiveIf: CYGDBG_USE_TRACING
3723 # Trace function reports
3724 # This option allows individual control of
3725 # function entry/exit tracing, independent of
3726 # more general tracing output.
3727 # This may be useful to remove clutter from a
3730 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3731 # This option is not active
3732 # The parent CYGDBG_USE_TRACING is not active
3733 # The parent CYGDBG_USE_TRACING is disabled
3736 # No user value, uncomment the following line to provide one.
3738 # value_source default
3743 # All trace calls within eCos contain a text message
3744 # which should give some information about the circumstances.
3745 # These text messages will end up being embedded in the
3746 # application image and hence there is a significant penalty
3747 # in terms of image size.
3748 # It is possible to suppress the use of these messages by
3749 # disabling this option.
3750 # This results in smaller code size, but there is less
3751 # human-readable information available in the trace output,
3752 # possibly only filenames and line numbers.
3754 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3755 # This option is not active
3756 # The parent CYGDBG_USE_TRACING is not active
3757 # The parent CYGDBG_USE_TRACING is disabled
3760 # No user value, uncomment the following line to provide one.
3762 # value_source default
3767 # Trace output implementations
3769 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3770 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3771 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3772 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3773 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3774 # This option is not active
3775 # The parent CYGPKG_INFRA_DEBUG is disabled
3777 # This value cannot be modified here.
3781 # The following properties are affected by this value
3782 # component CYGDBG_USE_ASSERTS
3783 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3784 # component CYGDBG_USE_TRACING
3785 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3789 # A null output module which is useful when
3790 # debugging interactively; the output routines
3791 # can be breakpointed rather than have them actually
3792 # 'print' something.
3794 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3795 # This option is not active
3796 # The parent CYGPKG_INFRA_DEBUG is disabled
3799 # No user value, uncomment the following line to provide one.
3801 # value_source default
3806 # An output module which produces simple output
3807 # from tracing and assertion events.
3809 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3810 # This option is not active
3811 # The parent CYGPKG_INFRA_DEBUG is disabled
3814 # No user value, uncomment the following line to provide one.
3816 # value_source default
3821 # An output module which produces fancy output
3822 # from tracing and assertion events.
3824 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3825 # This option is not active
3826 # The parent CYGPKG_INFRA_DEBUG is disabled
3829 # No user value, uncomment the following line to provide one.
3831 # value_source default
3836 # An output module which buffers output
3837 # from tracing and assertion events. The stored
3838 # messages are output when an assert fires, or
3839 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3841 # Of course, there will only be stored messages
3842 # if tracing per se (CYGDBG_USE_TRACING)
3845 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3846 # This option is not active
3847 # The parent CYGPKG_INFRA_DEBUG is disabled
3850 # No user value, uncomment the following line to provide one.
3852 # value_source default
3858 # The size of the trace buffer. This counts the number
3859 # of trace records stored. When the buffer fills it
3860 # either wraps, stops recording, or generates output.
3862 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3863 # This option is not active
3864 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3865 # ActiveIf constraint: CYGDBG_USE_TRACING
3866 # CYGDBG_USE_TRACING == 0
3870 # No user value, uncomment the following line to provide one.
3872 # value_source default
3874 # Legal values: 5 to 65535
3877 # Wrap trace buffer when full
3878 # When the trace buffer has filled with records it
3879 # starts again at the beginning. Hence only the last
3880 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3883 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3884 # This option is not active
3885 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3886 # ActiveIf constraint: CYGDBG_USE_TRACING
3887 # CYGDBG_USE_TRACING == 0
3891 # No user value, uncomment the following line to provide one.
3893 # value_source default
3897 # Halt trace buffer when full
3898 # When the trace buffer has filled with records it
3899 # stops recording. Hence only the first
3900 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3903 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3904 # This option is not active
3905 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3906 # ActiveIf constraint: CYGDBG_USE_TRACING
3907 # CYGDBG_USE_TRACING == 0
3911 # No user value, uncomment the following line to provide one.
3913 # value_source default
3917 # Print trace buffer when full
3918 # When the trace buffer has filled with records it
3919 # prints the contents of the buffer. The buffer is then
3920 # emptied and the system continues.
3922 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3923 # This option is not active
3924 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3925 # ActiveIf constraint: CYGDBG_USE_TRACING
3926 # CYGDBG_USE_TRACING == 0
3930 # No user value, uncomment the following line to provide one.
3932 # value_source default
3936 # Print trace buffer on assert fail
3937 # When an assertion fails the trace buffer will be
3938 # printed to the default diagnostic device.
3940 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3941 # This option is not active
3942 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3943 # ActiveIf constraint: CYGDBG_USE_TRACING
3944 # CYGDBG_USE_TRACING == 0
3948 # No user value, uncomment the following line to provide one.
3950 # value_source default
3955 # Use function names
3956 # All trace and assert calls within eCos contain a
3957 # reference to the builtin macro '__PRETTY_FUNCTION__',
3958 # which evaluates to a string containing
3959 # the name of the current function.
3960 # This is useful when reading a trace log.
3961 # It is possible to suppress the use of the function name
3962 # by disabling this option.
3963 # This results in smaller code size, but there is less
3964 # human-readable information available in the trace output,
3965 # possibly only filenames and line numbers.
3967 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
3968 # This option is not active
3969 # The parent CYGPKG_INFRA_DEBUG is disabled
3972 # No user value, uncomment the following line to provide one.
3974 # value_source default
3980 # Some packages require a startup routine to be called.
3981 # This can be carried out by application code, by supplying
3982 # a routine called cyg_package_start() which calls the
3983 # appropriate package startup routine(s).
3984 # Alternatively, this routine can be constructed automatically
3985 # and configured to call the startup routines of your choice.
3987 cdl_component CYGPKG_INFRA_STARTUP {
3988 # There is no associated value.
3992 # Start uITRON subsystem
3993 # Generate a call to initialize the
3994 # uITRON compatibility subsystem
3995 # within the system version of cyg_package_start().
3996 # This enables compatibility with uITRON.
3997 # You must configure uITRON with the correct tasks before
3998 # starting the uItron subsystem.
3999 # If this is disabled, and you want to use uITRON,
4000 # you must call cyg_uitron_start() from your own
4001 # cyg_package_start() or cyg_userstart().
4003 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4004 # This option is not active
4005 # ActiveIf constraint: CYGPKG_UITRON
4006 # CYGPKG_UITRON (unknown) == 0
4010 # No user value, uncomment the following line to provide one.
4012 # value_source default
4014 # Requires: CYGPKG_UITRON
4015 # CYGPKG_UITRON (unknown) == 0
4020 # Smaller slower memcpy()
4021 # Enabling this option causes the implementation of
4022 # the standard memcpy() routine to reduce code
4023 # size at the expense of execution speed. This
4024 # option is automatically enabled with the use of
4025 # the -Os option to the compiler. Also note that
4026 # the compiler will try to use its own builtin
4027 # version of memcpy() if possible, ignoring the
4028 # implementation in this package, unless given
4029 # the -fno-builtin compiler option.
4031 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4033 # No user value, uncomment the following line to provide one.
4035 # value_source default
4039 # Smaller slower memset()
4040 # Enabling this option causes the implementation of
4041 # the standard memset() routine to reduce code
4042 # size at the expense of execution speed. This
4043 # option is automatically enabled with the use of
4044 # the -Os option to the compiler. Also note that
4045 # the compiler will try to use its own builtin
4046 # version of memset() if possible, ignoring the
4047 # implementation in this package, unless given
4048 # the -fno-builtin compiler option.
4050 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4052 # No user value, uncomment the following line to provide one.
4054 # value_source default
4058 # Provide empty C++ delete functions
4059 # To deal with virtual destructors, where the correct delete()
4060 # function must be called for the derived class in question, the
4061 # underlying delete is called when needed, from destructors. This
4062 # is regardless of whether the destructor is called by delete itself.
4063 # So there is a reference to delete() from all destructors. The
4064 # default builtin delete() attempts to call free() if there is
4065 # one defined. So, if you have destructors, and you have free(),
4066 # as in malloc() and free(), any destructor counts as a reference
4067 # to free(). So the dynamic memory allocation code is linked
4068 # in regardless of whether it gets explicitly called. This
4069 # increases code and data size needlessly.
4070 # To defeat this undesirable behaviour, we define empty versions
4071 # of delete and delete. But doing this prevents proper use
4072 # of dynamic memory in C++ programs via C++'s new and delete
4074 # Therefore, this option is provided
4075 # for explicitly disabling the provision of these empty functions,
4076 # so that new and delete can be used, if that is what is required.
4078 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4080 # No user value, uncomment the following line to provide one.
4082 # value_source default
4086 # Threshold for valid number of delete calls
4087 # Some users don't know about the empty delete function and then
4088 # wonder why their C++ classes are leaking memory. If
4089 # INFRA_DEBUG is enabled we keep a counter for the number of
4090 # times delete is called. If it goes above this threshold we throw
4091 # an assertion failure. This should point heavy users of
4092 # delete in the right direction without upsetting those who want
4093 # an empty delete function.
4095 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4096 # This option is not active
4097 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4098 # CYGPKG_INFRA_DEBUG == 0
4102 # No user value, uncomment the following line to provide one.
4104 # value_source default
4105 # Default value: 100
4108 # Provide dummy abort() function
4109 # This option controls the inclusion of a dummy abort() function.
4110 # Parts of the C and C++ compiler runtime systems contain references
4111 # to abort(), particulary in the C++ exception handling code. It is
4112 # not possible to eliminate these references, so this dummy function
4113 # in included to satisfy them. It is not expected that this function
4114 # will ever be called, so its current behaviour is to simply loop.
4116 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4118 # No user value, uncomment the following line to provide one.
4120 # value_source default
4121 # Default value: CYGINT_ISO_EXIT == 0
4122 # CYGINT_ISO_EXIT == 0
4124 # Requires: !CYGINT_ISO_EXIT
4125 # CYGINT_ISO_EXIT == 0
4129 # Reset platform at end of test case execution
4130 # If this option is set then test case programs will reset the platform
4131 # when they terminate, as opposed to the default which is to just hang
4134 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4136 # No user value, uncomment the following line to provide one.
4138 # value_source default
4142 # Provide dummy strlen() function
4143 # This option controls the inclusion of a dummy strlen() function.
4144 # Parts of the C and C++ compiler runtime systems contain references
4145 # to strlen(), particulary in the C++ exception handling code. It is
4146 # not possible to eliminate these references, so this dummy function
4147 # in included to satisfy them. While it is not expected that this function
4148 # will ever be called, it is functional but uses the simplest, smallest
4149 # algorithm. There is a faster version of strlen() in the C library.
4151 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4153 # No user value, uncomment the following line to provide one.
4155 # value_source default
4156 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4157 # CYGINT_ISO_STRING_STRFUNCS == 1
4159 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4160 # CYGINT_ISO_STRING_STRFUNCS == 1
4164 # Make all compiler warnings show as errors
4165 # Enabling this option will cause all compiler warnings to show
4166 # as errors and bring the library build to a halt. This is used
4167 # to ensure that the code base is warning free, and thus ensure
4168 # that newly introduced warnings stand out and get fixed before
4169 # they show up as weird run-time behavior.
4171 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4176 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4177 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4180 # The following properties are affected by this value
4181 # option CYGBLD_GLOBAL_CFLAGS
4182 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4185 # Make compiler and assembler communicate by pipe
4186 # Enabling this option will cause the compiler to feed the
4187 # assembly output the the assembler via a pipe instead of
4188 # via a temporary file. This normally reduces the build
4191 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4196 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4197 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4201 # Infra build options
4202 # Package specific build options including control over
4203 # compiler flags used only in building this package.
4205 cdl_component CYGPKG_INFRA_OPTIONS {
4206 # There is no associated value.
4210 # Additional compiler flags
4211 # This option modifies the set of compiler flags for
4212 # building the eCos infra package. These flags are used
4213 # in addition to the set of global flags.
4215 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4217 # No user value, uncomment the following line to provide one.
4218 # user_value "-fno-rtti -Woverloaded-virtual"
4219 # value_source default
4220 # Default value: "-fno-rtti -Woverloaded-virtual"
4223 # Suppressed compiler flags
4224 # This option modifies the set of compiler flags for
4225 # building the eCos infra package. These flags are removed from
4226 # the set of global flags if present.
4228 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4230 # No user value, uncomment the following line to provide one.
4231 # user_value -Wno-pointer-sign
4232 # value_source default
4233 # Default value: -Wno-pointer-sign
4236 # Suppressed linker flags
4237 # This option modifies the set of linker flags for
4238 # building the eCos infra package tests. These flags are removed from
4239 # the set of global flags if present.
4241 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4243 # No user value, uncomment the following line to provide one.
4244 # user_value -Wl,--gc-sections
4245 # value_source default
4246 # Default value: -Wl,--gc-sections
4249 # Additional linker flags
4250 # This option modifies the set of linker flags for
4251 # building the eCos infra package tests. These flags are added to
4252 # the set of global flags if present.
4254 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4256 # No user value, uncomment the following line to provide one.
4257 # user_value -Wl,--fatal-warnings
4258 # value_source default
4259 # Default value: -Wl,--fatal-warnings
4262 # Infra package tests
4264 cdl_component CYGPKG_INFRA_TESTS {
4265 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4267 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4271 # Number of times a test runs
4272 # This option controls the number of times tests will execute their
4273 # basic function. Not all tests will honor this setting, but those
4274 # that do will execute the test N times before terminating. A value
4275 # less than 0 indicates to run forever.
4277 cdl_option CYGNUM_TESTS_RUN_COUNT {
4279 # No user value, uncomment the following line to provide one.
4281 # value_source default
4288 # Redboot ROM monitor
4289 # doc: ref/redboot.html
4290 # This package supports the Redboot [stand-alone debug monitor]
4291 # using eCos as the underlying board support mechanism.
4293 cdl_package CYGPKG_REDBOOT {
4294 # Packages cannot be added or removed, nor can their version be changed,
4295 # simply by editing their value. Instead the appropriate configuration
4296 # should be used to perform these actions.
4298 # This value cannot be modified here.
4300 # Current value: 1 current
4301 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4302 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4305 # The following properties are affected by this value
4306 # component CYGPKG_REDBOOT_ARM_OPTIONS
4307 # ActiveIf: CYGPKG_REDBOOT
4308 # component CYGPKG_REDBOOT_HAL_OPTIONS
4309 # ActiveIf: CYGPKG_REDBOOT
4310 # component CYGPKG_REDBOOT_HAL_TX27_OPTIONS
4311 # ActiveIf: CYGPKG_REDBOOT
4312 # option CYGSEM_IO_ETH_DRIVERS_WARN
4313 # ActiveIf: CYGPKG_REDBOOT
4317 # Include support for ELF file format
4319 cdl_component CYGSEM_REDBOOT_ELF {
4321 # No user value, uncomment the following line to provide one.
4323 # value_source default
4328 # Use the virtual address in the ELF headers
4329 # The ELF headers contain both a virtual and a physical address
4330 # for where code/data should be loaded. By default the physical
4331 # address is used but sometimes it is necassary to use the
4332 # virtual address because of bugy toolchains
4334 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4336 # No user value, uncomment the following line to provide one.
4338 # value_source default
4343 # Methods of loading images using redboot
4345 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4346 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4347 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4348 # This value cannot be modified here.
4352 # The following properties are affected by this value
4353 # component CYGBLD_BUILD_REDBOOT
4354 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4357 # Build Redboot ROM ELF image
4358 # This option enables the building of the Redboot ELF image.
4359 # The image may require further relocation or symbol
4360 # stripping before being converted to a binary image.
4361 # This is handled by a rule in the target CDL.
4363 cdl_component CYGBLD_BUILD_REDBOOT {
4365 # No user value, uncomment the following line to provide one.
4367 # The inferred value should not be edited directly.
4369 # value_source inferred
4371 # Requires: CYGPKG_INFRA
4372 # CYGPKG_INFRA == current
4374 # Requires: CYGPKG_ISOINFRA
4375 # CYGPKG_ISOINFRA == current
4377 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4378 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4380 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4381 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4383 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4384 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4386 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4387 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4389 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4390 # CYGINT_ISO_STRING_MEMFUNCS == 1
4392 # Requires: CYGINT_ISO_STRING_STRFUNCS
4393 # CYGINT_ISO_STRING_STRFUNCS == 1
4395 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4396 # CYGINT_REDBOOT_LOAD_METHOD == 2
4399 # The following properties are affected by this value
4400 # package CYGPKG_HAL_ARM_TX27KARO
4401 # Requires: CYGBLD_BUILD_REDBOOT == 1
4402 # option CYGBLD_BUILD_REDBOOT_BIN
4403 # ActiveIf: CYGBLD_BUILD_REDBOOT
4407 # Include GDB support in RedBoot
4408 # RedBoot normally includes support for the GDB debugging
4409 # protocols. This option allows this to be disabled which
4410 # may yield a substantial savings in terms of code and memory
4413 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4414 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4415 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4422 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4423 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4425 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4426 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4430 # Threads debugging support
4431 # Enabling this option will include special code in the
4432 # GDB stubs to support debugging of threaded programs. In
4433 # the case of eCos programs, this support allows GDB to
4434 # have complete access to the eCos threads in the
4437 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4438 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4439 # CYG_HAL_STARTUP == ROMRAM
4443 # No user value, uncomment the following line to provide one.
4445 # value_source default
4447 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4448 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4452 # Customized version string
4453 # Use this option to define a customized version "string" for
4454 # RedBoot. Note: this value is only cosmetic, displayed by the
4455 # "version" command, but is useful for providing site specific
4456 # information about the RedBoot configuration.
4458 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4460 # No user value, uncomment the following line to provide one.
4462 # The inferred value should not be edited directly.
4463 inferred_value 1 "Ka-Ro 2009-06-10"
4464 # value_source inferred
4465 # Default value: 0 0
4468 # Enable command line editing
4469 # If this option is non-zero, RedBoot will remember the
4470 # last N command lines. These lines may be reused.
4471 # Enabling this history will also enable rudimentary
4472 # editting of the lines themselves.
4474 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4476 # No user value, uncomment the following line to provide one.
4478 # value_source default
4481 # The following properties are affected by this value
4482 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4483 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4484 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4485 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4488 # Enable command line editing using ANSI arrows, etc
4489 # If this option is enabled, RedBoot will accept standard ANSI key
4490 # sequences for cursor movement (along with the emacs style keys).
4492 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4493 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4494 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4498 # No user value, uncomment the following line to provide one.
4500 # value_source default
4504 # Enable history command and expansion
4505 # Enabling this option will allow RedBoot to provide a
4506 # history command to list previous commands. Also enables
4507 # history expansion via '!' character similar to bash
4510 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4512 # No user value, uncomment the following line to provide one.
4514 # value_source default
4516 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4517 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4521 # Number of unique RAM segments on platform
4522 # Change this option to be the number of memory segments which are
4523 # supported by the platform. If the value is greater than 1, then
4524 # a platform specific function must provide information about the
4525 # additional segments.
4527 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4529 # No user value, uncomment the following line to provide one.
4531 # value_source default
4535 # Include support gzip/zlib decompression
4537 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4538 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4539 # CYGPKG_COMPRESS_ZLIB == current
4543 # No user value, uncomment the following line to provide one.
4545 # value_source default
4548 # The following properties are affected by this value
4549 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4550 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4554 # Size of zlib decompression buffer
4555 # This is the size of the buffer filled with incoming data
4556 # during load before calls are made to the decompressor
4557 # function. For ethernet downloads this can be made bigger
4558 # (at the cost of memory), but for serial downloads on slow
4559 # processors it may be necessary to reduce the size to
4560 # avoid serial overruns. zlib appears to bail out if less
4561 # than five bytes are available initially so this is the
4564 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4566 # No user value, uncomment the following line to provide one.
4568 # value_source default
4570 # Legal values: 5 to 256
4573 # Support compression of Flash images
4574 # This CDL indicates whether flash images can
4575 # be decompressed from gzip/zlib format into RAM.
4577 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4578 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4579 # CYGPKG_REDBOOT_FLASH == 1
4581 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4582 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4583 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4586 # Calculated value: 1
4591 # Include GZIP uncompress command
4592 # Enable this option to include a 'gunzip' command
4593 # to uncompress GZIP compressed data.
4595 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4597 # No user value, uncomment the following line to provide one.
4599 # value_source default
4603 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4604 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4606 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4608 # No user value, uncomment the following line to provide one.
4610 # The inferred value should not be edited directly.
4612 # value_source inferred
4615 # The following properties are affected by this value
4616 # option CYGPRI_REDBOOT_ZLIB_FLASH
4617 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4621 # Include support for xyzModem downloads
4622 # doc: ref/download-command.html
4624 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4626 # No user value, uncomment the following line to provide one.
4628 # value_source default
4631 # The following properties are affected by this value
4632 # option CYGPKG_REDBOOT_CFLAGS_ADD
4633 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4636 # Additional compiler flags
4637 # This option modifies the set of compiler flags for
4638 # building the eCos infra package. These flags are used
4639 # in addition to the set of global flags.
4641 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4642 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4643 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4647 # No user value, uncomment the following line to provide one.
4648 # user_value -Wno-inline
4649 # value_source default
4650 # Default value: -Wno-inline
4653 # Allow the load-command write into Flash.
4654 # Write images direct to Flash via the load command.
4655 # We assume anything which is invalid RAM is flash, hence
4656 # the requires statement
4658 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4659 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4660 # CYGPKG_REDBOOT_FLASH == 1
4664 # No user value, uncomment the following line to provide one.
4666 # value_source default
4668 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4669 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4673 # Include MS Windows CE support
4674 # doc: ref/wince.html
4675 # This option enables MS Windows CE EShell support
4676 # and Windows CE .BIN images support
4678 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4685 # Include support for MXC USB downloads
4687 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4689 # No user value, uncomment the following line to provide one.
4691 # value_source default
4695 # Include support for i.MX USB OTG downloads
4697 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4699 # No user value, uncomment the following line to provide one.
4701 # value_source default
4705 # Include POSIX checksum command
4706 # doc: ref/cksum-command.html
4708 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4710 # No user value, uncomment the following line to provide one.
4712 # value_source default
4716 # Include memory fill command
4717 # doc: ref/mfill-command.html
4719 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4721 # No user value, uncomment the following line to provide one.
4723 # value_source default
4727 # Include memory compare command
4728 # doc: ref/mcmp-command.html
4730 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4732 # No user value, uncomment the following line to provide one.
4734 # value_source default
4738 # Include memory copy command
4739 # doc: ref/mcopy-command.html
4741 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4743 # No user value, uncomment the following line to provide one.
4745 # value_source default
4749 # Include memory dump command
4750 # doc: ref/dump-command.html
4752 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4754 # No user value, uncomment the following line to provide one.
4756 # value_source default
4760 # Include cache command
4761 # doc: ref/cache-command.html
4763 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4765 # No user value, uncomment the following line to provide one.
4767 # value_source default
4771 # Include exec command
4772 # doc: ref/exec-command.html
4774 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4776 # No user value, uncomment the following line to provide one.
4778 # value_source default
4781 # The following properties are affected by this value
4782 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4783 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4786 # Include I/O Memory commands 'iopeek' and 'iopoke'
4788 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4790 # No user value, uncomment the following line to provide one.
4792 # value_source default
4796 # Granularity of timer/ticks
4797 # This option controls the granularity of the timers.
4798 # Faster CPUs can afford higher granularity (lower values)
4799 # which should give higher network performance since the stack
4802 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4804 # No user value, uncomment the following line to provide one.
4806 # value_source default
4807 # Default value: 250
4808 # Legal values: 10 25 50 100 250 500 1000
4811 # Redboot Networking
4812 # This option includes networking support in RedBoot.
4814 cdl_component CYGPKG_REDBOOT_NETWORKING {
4815 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4816 # CYGPKG_IO_ETH_DRIVERS == current
4820 # No user value, uncomment the following line to provide one.
4822 # value_source default
4825 # The following properties are affected by this value
4826 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4827 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4831 # Print net debug information
4832 # This option is overriden by the configuration stored
4835 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4837 # No user value, uncomment the following line to provide one.
4839 # value_source default
4843 # Support TFTP for download
4844 # This option enables the use of the TFTP protocol for
4847 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4849 # No user value, uncomment the following line to provide one.
4851 # value_source default
4855 # Support HTTP for download
4856 # This option enables the use of the HTTP protocol for
4859 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4866 # Default IP address
4867 # This IP address is the default used by RedBoot if
4868 # a BOOTP/DHCP server does not respond. The numbers
4869 # should be separated by *commas*, and not dots. If
4870 # an IP address is configured into the Flash
4871 # configuration, that will be used in preference.
4873 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4875 # No user value, uncomment the following line to provide one.
4877 # value_source default
4878 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4879 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4884 # Do not try to use BOOTP
4885 # By default Redboot tries to use BOOTP to get an IP
4886 # address. If there's no BOOTP server on your network
4887 # use this option to avoid to wait until the
4888 # timeout. This option is overriden by the
4889 # configuration stored in flash.
4891 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4892 # This option is not active
4893 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4896 # No user value, uncomment the following line to provide one.
4898 # value_source default
4902 # Default bootp server
4903 # This IP address is the default server
4904 # address used by RedBoot if a BOOTP/DHCP
4905 # server does not respond. The numbers should
4906 # be separated by *commas*, and not dots. If
4907 # an IP address is configured into the Flash
4908 # configuration, that will be used in
4911 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4912 # This option is not active
4913 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4916 # No user value, uncomment the following line to provide one.
4918 # value_source default
4919 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4920 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4925 # Use DHCP to get IP information
4926 # Use DHCP protocol to obtain pertinent IP addresses, such
4927 # as the client, server, gateway, etc.
4929 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4931 # No user value, uncomment the following line to provide one.
4933 # value_source default
4936 # The following properties are affected by this value
4937 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
4938 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4941 # Use a gateway for non-local IP traffic
4942 # Enabling this option will allow the RedBoot networking
4943 # stack to use a [single] gateway to reach a non-local
4944 # IP address. If disabled, RedBoot will only be able to
4945 # reach nodes on the same subnet.
4947 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
4949 # No user value, uncomment the following line to provide one.
4951 # value_source default
4953 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4954 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
4959 # Default gateway IP address
4960 # This IP address is the default used by RedBoot
4961 # if a BOOTP/DHCP server does not respond. The
4962 # numbers should be separated by *commas*, and
4963 # not dots. If an IP address is configured into
4964 # the Flash configuration, that will be used in
4967 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
4969 # No user value, uncomment the following line to provide one.
4971 # value_source default
4972 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4973 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4977 # Default IP address mask
4978 # This IP address mask is the default used by
4979 # RedBoot if a BOOTP/DHCP server does not
4980 # respond. The numbers should be separated by
4981 # *commas*, and not dots. If an IP address is
4982 # configured into the Flash configuration, that
4983 # will be used in preference.
4985 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
4987 # No user value, uncomment the following line to provide one.
4989 # value_source default
4990 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
4991 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4996 # TCP port to listen for incoming connections
4997 # RedBoot will 'listen' on this port for incoming TCP
4998 # connections. This allows outside connections to be made
4999 # to the platform, either for GDB or RedBoot commands.
5001 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
5003 # No user value, uncomment the following line to provide one.
5005 # value_source default
5006 # Default value: 9000
5009 # Number of [network] packet buffers
5010 # RedBoot may need to buffer network data to support
5011 # various connections. This option allows control
5012 # over the number of such buffered packets, and in
5013 # turn, controls the amount of memory used by RedBoot
5014 # (which is not available to user applications).
5015 # Each packet buffer takes up about 1514 bytes.
5016 # Note: there is little need to make this larger than
5019 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5021 # No user value, uncomment the following line to provide one.
5023 # value_source default
5025 # Legal values: 3 to 8
5029 # When this option is enabled, RedBoot will be built with
5030 # support for DNS, allowing use of hostnames on the command
5033 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5034 # This option is not active
5035 # ActiveIf constraint: CYGPKG_NS_DNS
5036 # CYGPKG_NS_DNS (unknown) == 0
5040 # No user value, uncomment the following line to provide one.
5042 # value_source default
5044 # Requires: !CYGPKG_NS_DNS_BUILD
5045 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5051 # This option sets the IP of the default DNS. The IP can be
5052 # changed at runtime as well.
5054 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5055 # This option is not active
5056 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5057 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5058 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5062 # No user value, uncomment the following line to provide one.
5063 # user_value 0.0.0.0
5064 # value_source default
5065 # Default value: 0.0.0.0
5068 # Timeout in DNS lookup
5069 # This option sets the timeout used when looking up an
5070 # address via the DNS. Default is 10 seconds.
5072 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5073 # This option is not active
5074 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5077 # No user value, uncomment the following line to provide one.
5079 # value_source default
5083 # Support the use of a domain name
5084 # This option controls if Redboot supports domain
5085 # names when performing DNS lookups
5087 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5088 # This option is not active
5089 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5092 # No user value, uncomment the following line to provide one.
5094 # value_source default
5099 # Default DNS domain
5100 # This option sets the default DNS domain name.
5101 # This value will be overwritten by the value in
5102 # flash or a domain returned by DHCP
5104 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5105 # This option is not active
5106 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5107 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5110 # No user value, uncomment the following line to provide one.
5112 # value_source default
5113 # Default value: 0 0
5116 # Get DNS domain from Flash
5117 # This option enables getting the domain name
5118 # from the flash configuration. This can later be
5119 # overwritten by a value learnt from DHCP
5121 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5122 # This option is not active
5123 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5124 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5125 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5126 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5130 # No user value, uncomment the following line to provide one.
5132 # value_source default
5136 # Use DNS domain from DHCP
5137 # This option enables the use of the domain name
5140 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5141 # This option is not active
5142 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5143 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5146 # No user value, uncomment the following line to provide one.
5148 # value_source default
5152 # BOOTP/DHCP DNS domain buffer size
5153 # This options sets the size of the static
5154 # buffer used by BOOTP/DHCP to store the DNS
5155 # domain name. The domain name will not be
5156 # set if the buffer is too small to hold it.
5158 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5159 # This option is not active
5160 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5161 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5164 # No user value, uncomment the following line to provide one.
5166 # value_source default
5172 # Default network device driver
5173 # This is the name of the default network device to use.
5175 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5176 # This option is not active
5177 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5178 # CYGHWR_NET_DRIVERS == 1
5182 # No user value, uncomment the following line to provide one.
5184 # value_source default
5185 # Default value: "\"\""
5188 # Initialize only one net device
5189 # This option tells RedBoot to stop initializing network
5190 # devices when it finds the first device which is
5191 # successfully initialized. The default behavior causes
5192 # all network devices to be initialized.
5194 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5195 # This option is not active
5196 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5197 # CYGHWR_NET_DRIVERS == 1
5201 # No user value, uncomment the following line to provide one.
5203 # value_source default
5208 # Let RedBoot use any I/O channel for its console.
5209 # If this option is enabled then RedBoot will attempt to use all
5210 # defined serial I/O channels for its console device. Once input
5211 # arrives at one of these channels then the console will use only
5214 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5216 # No user value, uncomment the following line to provide one.
5218 # The inferred value should not be edited directly.
5220 # value_source inferred
5224 # Let RedBoot adjust the baud rate of the serial console.
5225 # If this option is enabled then RedBoot will support commands
5226 # to set and query the baud rate on the selected console.
5228 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5229 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5230 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5234 # No user value, uncomment the following line to provide one.
5236 # value_source default
5240 # Run a platform specific startup function.
5241 # If this option is enabled then RedBoot will execute a platform
5242 # specific startup function before entering into its command line
5243 # processing. This allows the platform to perform any special
5244 # setups before RedBoot actually starts running. Note: the entire
5245 # RedBoot environment will already be initialized at this point.
5247 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5249 # No user value, uncomment the following line to provide one.
5251 # value_source default
5255 # Run a platform specific ESA validation function.
5256 # If this option is enabled then RedBoot will execute a platform
5257 # specific function to validate an ethernet ESA. This would be
5258 # useful if the address must conform to standards set by the
5259 # hardware manufacturer, etc.
5261 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5263 # No user value, uncomment the following line to provide one.
5265 # The inferred value should not be edited directly.
5267 # value_source inferred
5270 # The following properties are affected by this value
5271 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5272 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5273 # option CYGDAT_DEVS_ETH_ARM_TX27KARO_OUI
5274 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5277 # Maximum command line length
5278 # This option allows control over how long the CLI command line
5279 # should be. This space will be allocated statically
5280 # rather than from RedBoot's stack.
5282 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5284 # No user value, uncomment the following line to provide one.
5286 # The inferred value should not be edited directly.
5288 # value_source inferred
5289 # Default value: 256
5292 # Command processing idle timeout (ms)
5293 # This option controls the timeout period before the
5294 # command processing is considered 'idle'. Making this
5295 # number smaller will cause idle processing to take place
5296 # more often, etc. The default value of 10ms is a reasonable
5297 # tradeoff between responsiveness and overhead.
5299 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5301 # No user value, uncomment the following line to provide one.
5303 # value_source default
5307 # Validate RAM addresses during load
5308 # This option controls whether or not RedBoot will make
5309 # sure that memory being used by the "load" command is
5310 # in fact in user RAM. Leaving the option enabled makes
5311 # for a safer environment, but this check may not be valid
5312 # on all platforms, thus the ability to disable it.
5313 # ** Disable this only with great care **
5315 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5317 # No user value, uncomment the following line to provide one.
5319 # value_source default
5322 # The following properties are affected by this value
5323 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5324 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5327 # Allow RedBoot to support FLASH programming
5328 # If this option is enabled then RedBoot will provide commands
5329 # to manage images in FLASH memory. These images can be loaded
5330 # into memory for execution or executed in place.
5332 cdl_component CYGPKG_REDBOOT_FLASH {
5333 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5334 # CYGHWR_IO_FLASH_DEVICE == 1
5338 # No user value, uncomment the following line to provide one.
5340 # value_source default
5343 # The following properties are affected by this value
5344 # option CYGPRI_REDBOOT_ZLIB_FLASH
5345 # ActiveIf: CYGPKG_REDBOOT_FLASH
5346 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5347 # ActiveIf: CYGPKG_REDBOOT_FLASH
5351 # Byte order used to store info in flash.
5352 # This option controls the byte ordering used to store
5353 # the FIS directory info and flash config info.
5355 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5357 # No user value, uncomment the following line to provide one.
5358 # user_value NATURAL
5359 # value_source default
5360 # Default value: NATURAL
5361 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5364 # RedBoot Flash Image System support
5365 # doc: ref/flash-image-system.html
5366 # This option enables the Flash Image System commands
5367 # and support within RedBoot. If disabled, simple Flash
5368 # access commands such as "fis write" will still exist.
5369 # This option would be disabled for targets that need simple
5370 # FLASH manipulation, but do not have the need or space for
5371 # complete image management.
5373 cdl_option CYGOPT_REDBOOT_FIS {
5375 # No user value, uncomment the following line to provide one.
5377 # value_source default
5380 # The following properties are affected by this value
5381 # component CYGPKG_REDBOOT_FIS_CONTENTS
5382 # ActiveIf: CYGOPT_REDBOOT_FIS
5383 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5384 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5385 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5386 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5389 # Max number of chunks of free space to manage
5390 # If this option is defined then "fis free" will
5391 # rely on the FIS directory to determine what space is
5392 # free within the FLASH. This option controls the
5393 # maximum number of free segment which can be handled
5394 # (typically this number is small). If this option is
5395 # not enabled, the the archaic behaviour of actually
5396 # scanning the FLASH for erased sectors (unreliable)
5397 # will be used to determine what's free and what's
5400 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5402 # No user value, uncomment the following line to provide one.
5404 # value_source default
5405 # Default value: 1 32
5408 # Flash Image System default directory contents
5410 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5411 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5412 # CYGOPT_REDBOOT_FIS == 1
5415 # Calculated value: 1
5421 # Flash block containing the Directory
5422 # Which block of flash should hold the directory
5423 # information. Positive numbers are absolute block
5424 # numbers. Negative block numbers count backwards
5425 # from the last block. eg 2 means block 2, -2
5426 # means the last but one block.
5428 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5430 # No user value, uncomment the following line to provide one.
5432 # value_source default
5435 # The following properties are affected by this value
5436 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5437 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5438 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5441 # Redundant Flash Image System Directory Support
5442 # This option enables the use of a redundant FIS
5443 # directory within RedBoot. If enabled a flash block
5444 # will be reserved for a second copy of the fis
5445 # directory. Doing this allow for power failure safe
5446 # updates of the directory by the application.
5448 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5450 # No user value, uncomment the following line to provide one.
5452 # value_source default
5454 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5455 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5460 # Flash block containing the backup Directory
5461 # Which block of flash should hold the redundant
5462 # directory information. Positive numbers are
5463 # absolute block numbers. Negative block numbers
5464 # count backwards from the last block. eg 2 means
5465 # block 2, -2 means the last but one block.
5467 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5468 # This option is not active
5469 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5472 # No user value, uncomment the following line to provide one.
5474 # value_source default
5476 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5477 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5478 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5479 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5482 # The following properties are affected by this value
5483 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5484 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5485 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5489 # Pseudo-file to describe reserved area
5490 # If an area of FLASH is reserved, it is informative to
5491 # have a fis entry describing it. This option controls
5492 # creation of such an entry by default in the fis init
5495 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5496 # This option is not active
5497 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5498 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5502 # No user value, uncomment the following line to provide one.
5504 # value_source default
5508 # File to describe RedBoot boot image
5509 # Normally a ROM-startup RedBoot image is first in the
5510 # FLASH, and the system boots using that image. This
5511 # option controls creation of an entry describing it in
5512 # the fis init command. It might be disabled if a
5513 # platform has an immutable boot image of its own, where
5514 # we use a POST-startup RedBoot instead, which performs
5515 # less board initialization.
5517 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5519 # No user value, uncomment the following line to provide one.
5521 # value_source default
5524 # The following properties are affected by this value
5525 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5526 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5527 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5528 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5531 # File to describe RedBoot POST-compatible image
5532 # This option controls creation of an entry describing a
5533 # POST-startup RedBoot image in the fis init command.
5534 # Not all platforms support POST-startup. A platform
5535 # might have both for testing purposes, where the
5536 # eventual user would substitute their own POST code for
5537 # the initial ROM-startup RedBoot, and then jump to the
5538 # POST-compatible RedBoot immediately following.
5540 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5542 # No user value, uncomment the following line to provide one.
5544 # value_source default
5545 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5546 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5551 # Offset of POST image from FLASH start
5552 # This option specifies the offset for a POST image from
5553 # the start of FLASH. If unset, then the fis entry
5554 # describing the POST image will be placed where
5557 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5558 # This option is not active
5559 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5562 # No user value, uncomment the following line to provide one.
5564 # value_source default
5565 # Default value: 0 0
5566 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5567 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5568 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5571 # The following properties are affected by this value
5572 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5573 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5577 # File to describe RedBoot backup image
5578 # This option controls creation of an entry describing a
5579 # backup RedBoot image in the fis init command.
5580 # Conventionally a RAM-startup RedBoot image is kept
5581 # under this name for use in updating the ROM-based
5582 # RedBoot that boots the board.
5584 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5586 # No user value, uncomment the following line to provide one.
5588 # value_source default
5592 # Include ARM SIB ID in FIS
5593 # If set, this option will cause the last 5 words of
5594 # the FIS to include the special ID needed for the
5595 # flash to be recognized as a reserved area for RedBoot
5596 # by an ARM BootRom monitor.
5598 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5600 # No user value, uncomment the following line to provide one.
5602 # value_source default
5606 # Size of FIS directory entry
5607 # The FIS directory is limited to one single flash
5608 # sector. If your flash has tiny sectors, you may wish
5609 # to reduce this value in order to get more slots in
5610 # the FIS directory.
5612 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5614 # No user value, uncomment the following line to provide one.
5616 # value_source default
5617 # Default value: 256
5620 # Number of FIS directory entries
5621 # The FIS directory normally occupies a single flash
5622 # sector. Adjusting this value can allow for more than
5623 # one flash sector to be used, which is useful if your
5624 # sectors are very small.
5626 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5628 # No user value, uncomment the following line to provide one.
5630 # value_source default
5634 # Maximum RedBoot image size
5635 # This option controls the maximum length reserved
5636 # for the RedBoot boot image in the FIS table.
5637 # This should be a multiple of the flash's erase
5640 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5642 # No user value, uncomment the following line to provide one.
5643 # user_value 0x00020000
5644 # The inferred value should not be edited directly.
5645 inferred_value 0x00040000
5646 # value_source inferred
5647 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5648 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5652 # Offset from start of FLASH to RedBoot boot image
5653 # This option controls where the RedBoot boot image is
5654 # located relative to the start of FLASH.
5656 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5658 # No user value, uncomment the following line to provide one.
5660 # value_source default
5661 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5662 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5664 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5665 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5666 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5669 # The following properties are affected by this value
5670 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5671 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5672 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5673 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5674 # component CYGPKG_HAL_ARM_TX27_OPTIONS
5675 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5678 # Size of reserved area at start of FLASH
5679 # This option reserves an area at the start of
5680 # FLASH where RedBoot will never interfere; it is
5681 # expected that this area contains
5682 # (non-RedBoot-based) POST code or some other boot
5683 # monitor that executes before RedBoot.
5685 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5687 # No user value, uncomment the following line to provide one.
5689 # value_source default
5692 # The following properties are affected by this value
5693 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5694 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5695 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5696 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5697 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5698 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5702 # Keep all RedBoot FLASH data blocks locked.
5703 # When this option is enabled, RedBoot will keep configuration
5704 # data and the FIS directory blocks implicitly locked. While
5705 # this is somewhat safer, it does add overhead during updates.
5707 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5708 # This option is not active
5709 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5710 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5714 # No user value, uncomment the following line to provide one.
5716 # value_source default
5720 # Use CRC checksums on FIS images.
5721 # When this option is enabled, RedBoot will use CRC checksums
5722 # when reading and writing flash images.
5724 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5726 # No user value, uncomment the following line to provide one.
5728 # The inferred value should not be edited directly.
5730 # value_source inferred
5734 # ARM FLASH drivers support SIB flash block structure
5735 # This interface is implemented by a flash driver
5736 # to indicate that it supports the ARM SIB flash
5739 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5740 # No options implement this inferface
5741 # ActiveIf constraint: CYGPKG_HAL_ARM
5742 # CYGPKG_HAL_ARM == current
5745 # This value cannot be modified here.
5749 # The following properties are affected by this value
5750 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5751 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5754 # Use ARM SIB flash block structure
5755 # This option is used to interpret ARM Flash System
5756 # information blocks.
5758 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5759 # This option is not active
5760 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5761 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5765 # No user value, uncomment the following line to provide one.
5767 # value_source default
5772 # Keep RedBoot configuration data in FLASH
5773 # When this option is enabled, RedBoot will keep configuration
5774 # data in a separate block of FLASH memory. This data will
5775 # include such items as the node IP address or startup scripts.
5777 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5779 # No user value, uncomment the following line to provide one.
5781 # value_source default
5782 # Default value: CYGPKG_IO_FLASH != 0
5783 # CYGPKG_IO_FLASH == current
5786 # The following properties are affected by this value
5787 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5788 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5789 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5790 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5791 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5792 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5793 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5794 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5795 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5796 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5797 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5798 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5799 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5800 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5804 # Length of configuration data in FLASH
5805 # This option is used to control the amount of memory and FLASH
5806 # to be used for configuration options (persistent storage).
5808 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5810 # No user value, uncomment the following line to provide one.
5812 # value_source default
5813 # Default value: 4096
5816 # Style of media used for persistent data storage
5817 # Persistent data storage can either be held in 'norma' FLASH
5818 # or some other device (represented by the 'EEPROM' choice).
5819 # The different styles utilize different access methods.
5821 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5823 # No user value, uncomment the following line to provide one.
5825 # value_source default
5826 # Default value: FLASH
5827 # Legal values: "FLASH" "EEPROM"
5829 # The following properties are affected by this value
5830 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5831 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5832 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5833 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5836 # Merged config data and FIS directory
5837 # If this option is set, then the FIS directory and FLASH
5838 # configuration database will be stored in the same physical
5841 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5842 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5843 # CYGOPT_REDBOOT_FIS == 1
5844 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5848 # No user value, uncomment the following line to provide one.
5850 # value_source default
5853 # The following properties are affected by this value
5854 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5855 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5858 # Which block of flash to use
5859 # Which block of flash should hold the configuration
5860 # information. Positive numbers are absolute block numbers.
5861 # Negative block numbers count backwards from the last block.
5862 # eg 2 means block 2, -2 means the last but one block.
5864 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5866 # No user value, uncomment the following line to provide one.
5868 # value_source default
5872 # Support simple macros/aliases in FLASH
5873 # This option is used to allow support for simple text-based
5874 # macros (aliases). These aliases are kept in the FLASH
5875 # configuration data (persistent storage).
5877 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5879 # No user value, uncomment the following line to provide one.
5881 # value_source default
5885 # Length of strings in FLASH configuration data
5886 # This option is used to control the amount of memory
5887 # and FLASH to be used for string configuration
5888 # options (persistent storage).
5890 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5892 # No user value, uncomment the following line to provide one.
5894 # value_source default
5895 # Default value: 128
5898 # Length of configuration script(s) in FLASH
5899 # This option is used to control the amount of memory and
5900 # FLASH to be used for configuration options (persistent
5903 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5905 # No user value, uncomment the following line to provide one.
5907 # The inferred value should not be edited directly.
5909 # value_source inferred
5910 # Default value: 512
5913 # Fallback to read-only FLASH configuration
5914 # This option will cause the configuration information to
5915 # revert to the readonly information stored in the FLASH.
5916 # The option only takes effect after
5917 # 1) the config_ok flag has been set to be true,
5918 # indicating that at one time the copy in RAM was valid;
5920 # 2) the information in RAM has been verified to be invalid
5922 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5924 # No user value, uncomment the following line to provide one.
5926 # value_source default
5927 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5928 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5933 # Allow RedBoot to support fileio
5934 # If this option is enabled then RedBoot will provide commands
5935 # to load files from fileio file systems such as JFFS2.
5937 cdl_component CYGPKG_REDBOOT_FILEIO {
5938 # This option is not active
5939 # ActiveIf constraint: CYGPKG_IO_FILEIO
5940 # CYGPKG_IO_FILEIO (unknown) == 0
5944 # No user value, uncomment the following line to provide one.
5946 # value_source default
5949 # The following properties are affected by this value
5950 # option CYGNUM_REDBOOT_GETC_BUFFER
5951 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
5955 # Include an ls command
5956 # If this option is enabled a simple ls command will be
5957 # included in redboot so the contents of a directory
5960 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
5961 # This option is not active
5962 # The parent CYGPKG_REDBOOT_FILEIO is not active
5965 # No user value, uncomment the following line to provide one.
5967 # value_source default
5972 # Allow RedBoot to support disks
5973 # If this option is enabled then RedBoot will provide commands
5974 # to load disk files.
5976 cdl_component CYGPKG_REDBOOT_DISK {
5984 # Include Redboot commands for disk access
5986 cdl_option CYGSEM_REDBOOT_DISK {
5987 # This option is not active
5988 # The parent CYGPKG_REDBOOT_DISK is disabled
5991 # No user value, uncomment the following line to provide one.
5993 # value_source default
5994 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
5995 # CYGINT_REDBOOT_DISK_DRIVERS == 0
5999 # Hardware drivers for disk-type devices
6001 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
6002 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
6003 # This option is not active
6004 # The parent CYGPKG_REDBOOT_DISK is disabled
6006 # This value cannot be modified here.
6010 # The following properties are affected by this value
6011 # option CYGSEM_REDBOOT_DISK
6012 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
6015 # Maximum number of supported disks
6016 # This option controls the number of disks supported by
6019 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6020 # This option is not active
6021 # The parent CYGPKG_REDBOOT_DISK is disabled
6024 # No user value, uncomment the following line to provide one.
6026 # value_source default
6030 # Maximum number of partitions per disk
6031 # This option controls the maximum number of supported
6032 # partitions per disk.
6034 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6035 # This option is not active
6036 # The parent CYGPKG_REDBOOT_DISK is disabled
6039 # No user value, uncomment the following line to provide one.
6041 # value_source default
6045 # Support IDE disks.
6046 # When this option is enabled, RedBoot will support IDE disks.
6048 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6049 # This option is not active
6050 # The parent CYGPKG_REDBOOT_DISK is disabled
6051 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6052 # CYGINT_HAL_PLF_IF_IDE == 0
6056 # No user value, uncomment the following line to provide one.
6058 # value_source default
6063 # Work with VMware virtual disks
6064 # This option controls the disk driver behavior at
6067 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6068 # This option is not active
6069 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6072 # No user value, uncomment the following line to provide one.
6074 # value_source default
6079 # Support Linux second extended filesystems.
6080 # When this option is enabled, RedBoot will support EXT2
6083 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6084 # This option is not active
6085 # The parent CYGPKG_REDBOOT_DISK is disabled
6088 # No user value, uncomment the following line to provide one.
6090 # value_source default
6094 # Support ISO9660 filesystems.
6095 # When this option is enabled, RedBoot will support ISO9660
6098 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6099 # This option is not active
6100 # The parent CYGPKG_REDBOOT_DISK is disabled
6102 # Calculated value: 0
6109 # doc: ref/persistent-state-flash.html
6110 # This contains options related to RedBoot's boot script
6113 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6114 # There is no associated value.
6118 # Boot scripting enabled
6119 # This option controls whether RedBoot boot script
6120 # functionality is enabled.
6122 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6123 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6124 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6125 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6128 # Calculated value: 1
6133 # Use default RedBoot boot script
6134 # If enabled, this option will tell RedBoot to use the
6135 # value of this option as a default boot script.
6137 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6139 # No user value, uncomment the following line to provide one.
6141 # The inferred value should not be edited directly.
6143 # value_source inferred
6144 # Default value: 0 0
6146 # The following properties are affected by this value
6147 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6148 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6151 # Resolution (in ms) for script timeout value.
6152 # This option controls the resolution of the script
6153 # timeout. The value is specified in milliseconds
6154 # (ms), thus to have the script timeout be defined in
6155 # terms of tenths of seconds, use 100.
6157 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6159 # No user value, uncomment the following line to provide one.
6161 # The inferred value should not be edited directly.
6163 # value_source inferred
6164 # Default value: 1000
6167 # Script default timeout value
6168 # This option is used to set the default timeout for startup
6169 # scripts, when they are enabled.
6171 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6173 # No user value, uncomment the following line to provide one.
6175 # The inferred value should not be edited directly.
6177 # value_source inferred
6182 # Support RTC for time & date functions
6183 # When this option is enabled, RedBoot will support commands to
6184 # query and set the real time clock (time and date)
6186 cdl_option CYGSEM_REDBOOT_RTC {
6187 # This option is not active
6188 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6189 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6193 # No user value, uncomment the following line to provide one.
6195 # value_source default
6199 # Behave like a ROM monitor
6200 # Enabling this option will allow RedBoot to provide ROM
6201 # monitor-style services to programs which it executes.
6203 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6204 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6205 # CYG_HAL_STARTUP == ROMRAM
6206 # CYG_HAL_STARTUP == ROMRAM
6209 # Calculated value: 1
6212 # Requires: CYGSEM_HAL_ROM_MONITOR
6213 # CYGSEM_HAL_ROM_MONITOR == 1
6217 # Allow RedBoot to handle GNUPro application 'syscalls'.
6218 # If this option is enabled then RedBoot will install a
6219 # syscall handler to support debugging of applications
6220 # based on GNUPro newlib/bsp.
6222 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6224 # No user value, uncomment the following line to provide one.
6226 # value_source default
6229 # The following properties are affected by this value
6230 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6231 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6232 # option CYGPKG_HAL_GDB_FILEIO
6233 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6237 # Support additional syscalls for 'gprof' profiling
6238 # Support additional syscalls to support a periodic callback
6239 # function for histogram-style profiling, and an enquire/set
6241 # The application must use the GNUPro newlib facilities
6244 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6245 # This option is not active
6246 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6247 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6248 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6252 # No user value, uncomment the following line to provide one.
6254 # value_source default
6258 # Does the HAL support 'gprof' profiling?
6260 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6261 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6262 # This option is not active
6263 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6265 # This value cannot be modified here.
6269 # The following properties are affected by this value
6270 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6271 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6274 # Do not raise SIGTRAP when program exits
6275 # For some (single shot) newlib based programs,
6276 # exiting and returning a termination status may be
6277 # the normal expected behavior.
6279 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6280 # This option is not active
6281 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6284 # No user value, uncomment the following line to provide one.
6286 # value_source default
6291 # Use a common buffer for Zlib and FIS
6292 # Use a common memory buffer for both the zlib workspace
6293 # and FIS directory operations. This can save a substantial
6294 # amount of RAM, especially when flash sectors are large.
6296 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6297 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6298 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6299 # CYGOPT_REDBOOT_FIS == 1
6303 # No user value, uncomment the following line to provide one.
6305 # value_source default
6310 # Size of Zlib/FIS common buffer
6311 # Size of common buffer to allocate. Must be at least the
6312 # size of one flash sector.
6314 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6315 # This option is not active
6316 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6319 # No user value, uncomment the following line to provide one.
6320 # user_value 0x0000C000
6321 # value_source default
6322 # Default value: 0x0000C000
6323 # Legal values: 0x4000 to 0x80000000
6327 # Buffer size in getc when loading images
6328 # When loading images a buffer is used between redboot and the
6329 # underlying storage medium, eg a filesystem, or a socket etc.
6330 # The size of this buffer can have a big impart on load speed.
6332 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6334 # No user value, uncomment the following line to provide one.
6336 # value_source default
6337 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6338 # CYGPKG_REDBOOT_FILEIO == 0
6343 # Redboot for ARM options
6344 # This option lists the target's requirements for a valid Redboot
6347 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6348 # ActiveIf constraint: CYGPKG_REDBOOT
6349 # CYGPKG_REDBOOT == current
6352 # There is no associated value.
6354 # The following properties are affected by this value
6358 # Provide the exec command in RedBoot
6359 # This option contains requirements for booting linux
6360 # from RedBoot. The component is enabled/disabled from
6363 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6364 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6365 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6368 # There is no associated value.
6372 # Enable -x switch for exec command.
6373 # This option allows bi-endian platforms to launch kernels
6374 # built for an endianess different than the RedBoot endianess
6376 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6378 # No user value, uncomment the following line to provide one.
6380 # value_source default
6384 # Physical base address of linux kernel
6385 # This is the physical address of the base of the
6386 # Linux kernel image.
6388 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6390 # No user value, uncomment the following line to provide one.
6391 # user_value 0xA0108000
6392 # value_source default
6393 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6394 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6398 # Default physical base address of linux kernel
6399 # This is the physical address of the base of the
6400 # Linux kernel image. This option gets set by the
6403 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6405 # No user value, uncomment the following line to provide one.
6406 # user_value 0x00008000
6407 # The inferred value should not be edited directly.
6408 inferred_value 0xA0108000
6409 # value_source inferred
6410 # Default value: 0x00008000
6412 # The following properties are affected by this value
6413 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6414 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6415 # component CYGPKG_REDBOOT_HAL_TX27_OPTIONS
6416 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6419 # Base address of linux kernel parameter tags
6420 # This is the base address of the area of memory used to
6421 # pass parameters to the Linux kernel. This should be chosen
6422 # to avoid overlap with the kernel and any ramdisk image.
6424 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6426 # No user value, uncomment the following line to provide one.
6427 # user_value 0x00000100
6428 # value_source default
6429 # Default value: 0x00000100
6434 # Redboot HAL options
6435 # This option lists the target's requirements for a valid Redboot
6438 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6439 # ActiveIf constraint: CYGPKG_REDBOOT
6440 # CYGPKG_REDBOOT == current
6443 # There is no associated value.
6447 # Build Redboot ROM binary image
6448 # This option enables the conversion of the Redboot ELF
6449 # image to a binary image suitable for ROM programming.
6451 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6452 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6453 # CYGBLD_BUILD_REDBOOT == 1
6457 # No user value, uncomment the following line to provide one.
6459 # value_source default
6464 # Redboot HAL variant options
6466 cdl_component CYGPKG_REDBOOT_HAL_TX27_OPTIONS {
6467 # ActiveIf constraint: CYGPKG_REDBOOT
6468 # CYGPKG_REDBOOT == current
6471 # There is no associated value.
6472 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6473 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6478 # ISO C and POSIX infrastructure
6479 # eCos supports implementations of ISO C libraries and POSIX
6480 # implementations. This package provides infrastructure used by
6481 # all such implementations.
6483 cdl_package CYGPKG_ISOINFRA {
6484 # Packages cannot be added or removed, nor can their version be changed,
6485 # simply by editing their value. Instead the appropriate configuration
6486 # should be used to perform these actions.
6488 # This value cannot be modified here.
6490 # Current value: 1 current
6492 # The following properties are affected by this value
6493 # component CYGBLD_BUILD_REDBOOT
6494 # Requires: CYGPKG_ISOINFRA
6495 # package CYGPKG_LIBC_STRING
6496 # Requires: CYGPKG_ISOINFRA
6497 # package CYGPKG_COMPRESS_ZLIB
6498 # Requires: CYGPKG_ISOINFRA
6499 # package CYGPKG_IO_FLASH
6500 # Requires: CYGPKG_ISOINFRA
6501 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6502 # Requires: CYGPKG_ISOINFRA
6503 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6504 # DefaultValue: 0 != CYGPKG_ISOINFRA
6505 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6506 # ActiveIf: CYGPKG_ISOINFRA
6507 # package CYGPKG_LIBC_I18N
6508 # Requires: CYGPKG_ISOINFRA
6509 # package CYGPKG_LIBC_STDLIB
6510 # Requires: CYGPKG_ISOINFRA
6514 # Startup and termination
6516 cdl_component CYGPKG_ISO_STARTUP {
6517 # There is no associated value.
6521 # main() startup implementations
6522 # Implementations of this interface arrange for a user-supplied
6523 # main() to be called in an ISO compatible environment.
6525 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6526 # No options implement this inferface
6527 # This value cannot be modified here.
6530 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6531 # CYGINT_ISO_MAIN_STARTUP == 0
6534 # The following properties are affected by this value
6535 # interface CYGINT_ISO_MAIN_STARTUP
6536 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6539 # environ implementations
6540 # Implementations of this interface provide the environ
6541 # variable required by POSIX.
6543 cdl_interface CYGINT_ISO_ENVIRON {
6544 # No options implement this inferface
6545 # This value cannot be modified here.
6548 # Requires: 1 >= CYGINT_ISO_ENVIRON
6549 # CYGINT_ISO_ENVIRON == 0
6552 # The following properties are affected by this value
6553 # interface CYGINT_ISO_ENVIRON
6554 # Requires: 1 >= CYGINT_ISO_ENVIRON
6560 cdl_component CYGPKG_ISO_CTYPE_H {
6561 # There is no associated value.
6565 # Number of implementations of ctype functions
6567 cdl_interface CYGINT_ISO_CTYPE {
6568 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6569 # This value cannot be modified here.
6572 # Requires: 1 >= CYGINT_ISO_CTYPE
6573 # CYGINT_ISO_CTYPE == 1
6576 # The following properties are affected by this value
6577 # interface CYGINT_ISO_CTYPE
6578 # Requires: 1 >= CYGINT_ISO_CTYPE
6579 # package CYGPKG_HAL_ARM_TX27KARO
6580 # Requires: CYGINT_ISO_CTYPE
6581 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6582 # Requires: CYGINT_ISO_CTYPE
6583 # package CYGPKG_LIBC_STDLIB
6584 # Requires: CYGINT_ISO_CTYPE
6587 # Ctype implementation header
6589 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6591 # No user value, uncomment the following line to provide one.
6593 # The inferred value should not be edited directly.
6594 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6595 # value_source inferred
6596 # Default value: 0 0
6598 # The following properties are affected by this value
6599 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6600 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6601 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6602 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6608 cdl_component CYGPKG_ISO_ERRNO {
6609 # There is no associated value.
6613 # Number of implementations of error codes
6615 cdl_interface CYGINT_ISO_ERRNO_CODES {
6616 # Implemented by CYGPKG_ERROR, active, enabled
6617 # This value cannot be modified here.
6620 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6621 # CYGINT_ISO_ERRNO_CODES == 1
6624 # The following properties are affected by this value
6625 # interface CYGINT_ISO_ERRNO_CODES
6626 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6629 # Error codes implementation header
6631 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6633 # No user value, uncomment the following line to provide one.
6635 # The inferred value should not be edited directly.
6636 inferred_value 1 <cyg/error/codes.h>
6637 # value_source inferred
6638 # Default value: 0 0
6640 # The following properties are affected by this value
6641 # package CYGPKG_ERROR
6642 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6645 # Number of implementations of errno variable
6647 cdl_interface CYGINT_ISO_ERRNO {
6648 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6649 # This value cannot be modified here.
6652 # Requires: 1 >= CYGINT_ISO_ERRNO
6653 # CYGINT_ISO_ERRNO == 1
6656 # The following properties are affected by this value
6657 # interface CYGINT_ISO_ERRNO
6658 # Requires: 1 >= CYGINT_ISO_ERRNO
6661 # errno variable implementation header
6663 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6665 # No user value, uncomment the following line to provide one.
6667 # The inferred value should not be edited directly.
6668 inferred_value 1 <cyg/error/errno.h>
6669 # value_source inferred
6670 # Default value: 0 0
6672 # The following properties are affected by this value
6673 # component CYGPKG_ERROR_ERRNO
6674 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6678 # Locale-related functions
6680 cdl_component CYGPKG_ISO_LOCALE {
6681 # There is no associated value.
6685 # Number of implementations of locale functions
6687 cdl_interface CYGINT_ISO_LOCALE {
6688 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6689 # This value cannot be modified here.
6692 # Requires: 1 >= CYGINT_ISO_LOCALE
6693 # CYGINT_ISO_LOCALE == 1
6696 # The following properties are affected by this value
6697 # interface CYGINT_ISO_LOCALE
6698 # Requires: 1 >= CYGINT_ISO_LOCALE
6701 # Locale implementation header
6703 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6705 # No user value, uncomment the following line to provide one.
6707 # value_source default
6708 # Default value: 0 0
6712 # Standard I/O-related functionality
6714 cdl_component CYGPKG_ISO_STDIO {
6715 # There is no associated value.
6719 # Number of implementations of stdio file types
6721 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6722 # No options implement this inferface
6723 # This value cannot be modified here.
6725 # Current value: 0 0
6726 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6727 # CYGINT_ISO_STDIO_FILETYPES == 0
6730 # The following properties are affected by this value
6731 # interface CYGINT_ISO_STDIO_FILETYPES
6732 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6735 # Stdio file types implementation header
6737 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6739 # No user value, uncomment the following line to provide one.
6741 # value_source default
6742 # Default value: 0 0
6745 # Stdio standard streams implementations
6747 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6748 # No options implement this inferface
6749 # This value cannot be modified here.
6751 # Current value: 0 0
6752 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6753 # CYGINT_ISO_STDIO_STREAMS == 0
6756 # The following properties are affected by this value
6757 # interface CYGINT_ISO_STDIO_STREAMS
6758 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6761 # Stdio standard streams implementation header
6762 # This header file must define stdin, stdout
6765 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6767 # No user value, uncomment the following line to provide one.
6769 # value_source default
6770 # Default value: 0 0
6773 # Number of implementations of stdio file operations
6775 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6776 # No options implement this inferface
6777 # This value cannot be modified here.
6779 # Current value: 0 0
6780 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6781 # CYGINT_ISO_STDIO_FILEOPS == 0
6784 # The following properties are affected by this value
6785 # interface CYGINT_ISO_STDIO_FILEOPS
6786 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6789 # Stdio file operations implementation header
6790 # This header controls the file system operations on a file
6791 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6794 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6796 # No user value, uncomment the following line to provide one.
6798 # value_source default
6799 # Default value: 0 0
6802 # Number of implementations of stdio file access functionals
6804 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6805 # No options implement this inferface
6806 # This value cannot be modified here.
6808 # Current value: 0 0
6809 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6810 # CYGINT_ISO_STDIO_FILEACCESS == 0
6813 # The following properties are affected by this value
6814 # interface CYGINT_ISO_STDIO_FILEACCESS
6815 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6816 # option CYGFUN_COMPRESS_ZLIB_GZIO
6817 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6820 # Stdio file access implementation header
6821 # This header controls the file access operations
6822 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6823 # setvbuf(), and associated constants.
6825 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6827 # No user value, uncomment the following line to provide one.
6829 # value_source default
6830 # Default value: 0 0
6833 # Number of implementations of stdio formatted I/O
6835 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6836 # No options implement this inferface
6837 # This value cannot be modified here.
6839 # Current value: 0 0
6840 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6841 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6844 # The following properties are affected by this value
6845 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6846 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6847 # option CYGFUN_COMPRESS_ZLIB_GZIO
6848 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6851 # Stdio formatted I/O implementation header
6853 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6855 # No user value, uncomment the following line to provide one.
6857 # value_source default
6858 # Default value: 0 0
6861 # Number of implementations of stdio character I/O
6863 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6864 # No options implement this inferface
6865 # This value cannot be modified here.
6867 # Current value: 0 0
6868 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6869 # CYGINT_ISO_STDIO_CHAR_IO == 0
6872 # The following properties are affected by this value
6873 # interface CYGINT_ISO_STDIO_CHAR_IO
6874 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6877 # Stdio character I/O implementation header
6879 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6881 # No user value, uncomment the following line to provide one.
6883 # value_source default
6884 # Default value: 0 0
6887 # Number of implementations of stdio direct I/O
6889 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6890 # No options implement this inferface
6891 # This value cannot be modified here.
6893 # Current value: 0 0
6894 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6895 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6898 # The following properties are affected by this value
6899 # interface CYGINT_ISO_STDIO_DIRECT_IO
6900 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6903 # Stdio direct I/O implementation header
6905 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6907 # No user value, uncomment the following line to provide one.
6909 # value_source default
6910 # Default value: 0 0
6913 # Number of implementations of stdio file positioning
6915 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6916 # No options implement this inferface
6917 # This value cannot be modified here.
6919 # Current value: 0 0
6920 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6921 # CYGINT_ISO_STDIO_FILEPOS == 0
6924 # The following properties are affected by this value
6925 # interface CYGINT_ISO_STDIO_FILEPOS
6926 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6927 # option CYGFUN_COMPRESS_ZLIB_GZIO
6928 # Requires: CYGINT_ISO_STDIO_FILEPOS
6931 # Stdio file positioning implementation header
6933 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6935 # No user value, uncomment the following line to provide one.
6937 # value_source default
6938 # Default value: 0 0
6941 # Number of implementations of stdio error handling
6943 cdl_interface CYGINT_ISO_STDIO_ERROR {
6944 # No options implement this inferface
6945 # This value cannot be modified here.
6947 # Current value: 0 0
6948 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6949 # CYGINT_ISO_STDIO_ERROR == 0
6952 # The following properties are affected by this value
6953 # interface CYGINT_ISO_STDIO_ERROR
6954 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6957 # Stdio error handling implementation header
6959 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
6961 # No user value, uncomment the following line to provide one.
6963 # value_source default
6964 # Default value: 0 0
6967 # POSIX fd-related function implementations
6969 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
6970 # No options implement this inferface
6971 # This value cannot be modified here.
6973 # Current value: 0 0
6974 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6975 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
6978 # The following properties are affected by this value
6979 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
6980 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6983 # POSIX fd-related function implementation header
6985 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
6987 # No user value, uncomment the following line to provide one.
6989 # value_source default
6990 # Default value: 0 0
6994 # Standard general utility functions
6996 cdl_component CYGPKG_ISO_STDLIB {
6997 # There is no associated value.
7001 # String conversion function implementations
7003 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
7004 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7005 # This value cannot be modified here.
7008 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7009 # CYGINT_ISO_STDLIB_STRCONV == 1
7012 # The following properties are affected by this value
7013 # interface CYGINT_ISO_STDLIB_STRCONV
7014 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7017 # String conversion function implementation header
7019 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7021 # No user value, uncomment the following line to provide one.
7023 # The inferred value should not be edited directly.
7024 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7025 # value_source inferred
7026 # Default value: 0 0
7028 # The following properties are affected by this value
7029 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7030 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7033 # String to FP conversion function implementations
7035 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7036 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7037 # This value cannot be modified here.
7040 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7041 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7044 # The following properties are affected by this value
7045 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7046 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7049 # String to FP conversion function implementation header
7051 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7053 # No user value, uncomment the following line to provide one.
7055 # value_source default
7056 # Default value: 0 0
7059 # Random number generator implementations
7061 cdl_interface CYGINT_ISO_RAND {
7062 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7063 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7064 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7065 # This value cannot be modified here.
7068 # Requires: 1 >= CYGINT_ISO_RAND
7069 # CYGINT_ISO_RAND == 1
7072 # The following properties are affected by this value
7073 # interface CYGINT_ISO_RAND
7074 # Requires: 1 >= CYGINT_ISO_RAND
7077 # Random number generator implementation header
7079 cdl_option CYGBLD_ISO_RAND_HEADER {
7081 # No user value, uncomment the following line to provide one.
7083 # value_source default
7084 # Default value: 0 0
7087 # Malloc implementations
7089 cdl_interface CYGINT_ISO_MALLOC {
7090 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7091 # This value cannot be modified here.
7094 # Requires: 1 >= CYGINT_ISO_MALLOC
7095 # CYGINT_ISO_MALLOC == 1
7098 # The following properties are affected by this value
7099 # interface CYGINT_ISO_MALLOC
7100 # Requires: 1 >= CYGINT_ISO_MALLOC
7101 # option CYGFUN_LIBC_STRING_STRDUP
7102 # ActiveIf: CYGINT_ISO_MALLOC
7105 # Malloc implementation header
7107 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7109 # No user value, uncomment the following line to provide one.
7111 # value_source default
7112 # Default value: 0 0
7115 # Mallinfo() implementations
7117 cdl_interface CYGINT_ISO_MALLINFO {
7118 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7119 # This value cannot be modified here.
7122 # Requires: 1 >= CYGINT_ISO_MALLINFO
7123 # CYGINT_ISO_MALLINFO == 1
7126 # The following properties are affected by this value
7127 # interface CYGINT_ISO_MALLINFO
7128 # Requires: 1 >= CYGINT_ISO_MALLINFO
7131 # Mallinfo() implementation header
7133 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7135 # No user value, uncomment the following line to provide one.
7137 # value_source default
7138 # Default value: 0 0
7141 # Program exit functionality implementations
7143 cdl_interface CYGINT_ISO_EXIT {
7144 # No options implement this inferface
7145 # This value cannot be modified here.
7148 # Requires: 1 >= CYGINT_ISO_EXIT
7149 # CYGINT_ISO_EXIT == 0
7152 # The following properties are affected by this value
7153 # interface CYGINT_ISO_EXIT
7154 # Requires: 1 >= CYGINT_ISO_EXIT
7155 # option CYGFUN_INFRA_DUMMY_ABORT
7156 # Requires: !CYGINT_ISO_EXIT
7157 # option CYGFUN_INFRA_DUMMY_ABORT
7158 # DefaultValue: CYGINT_ISO_EXIT == 0
7161 # Program exit functionality implementation header
7163 cdl_option CYGBLD_ISO_EXIT_HEADER {
7165 # No user value, uncomment the following line to provide one.
7167 # value_source default
7168 # Default value: 0 0
7171 # Program environment implementations
7173 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7174 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7175 # This value cannot be modified here.
7178 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7179 # CYGINT_ISO_STDLIB_ENVIRON == 1
7182 # The following properties are affected by this value
7183 # interface CYGINT_ISO_STDLIB_ENVIRON
7184 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7187 # Program environment implementation header
7189 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7191 # No user value, uncomment the following line to provide one.
7193 # value_source default
7194 # Default value: 0 0
7197 # system() implementations
7199 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7200 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7201 # This value cannot be modified here.
7204 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7205 # CYGINT_ISO_STDLIB_SYSTEM == 1
7208 # The following properties are affected by this value
7209 # interface CYGINT_ISO_STDLIB_SYSTEM
7210 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7213 # system() implementation header
7215 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7217 # No user value, uncomment the following line to provide one.
7219 # value_source default
7220 # Default value: 0 0
7223 # bsearch() implementations
7225 cdl_interface CYGINT_ISO_BSEARCH {
7226 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7227 # This value cannot be modified here.
7230 # Requires: 1 >= CYGINT_ISO_BSEARCH
7231 # CYGINT_ISO_BSEARCH == 1
7234 # The following properties are affected by this value
7235 # interface CYGINT_ISO_BSEARCH
7236 # Requires: 1 >= CYGINT_ISO_BSEARCH
7239 # bsearch() implementation header
7241 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7243 # No user value, uncomment the following line to provide one.
7245 # value_source default
7246 # Default value: 0 0
7249 # qsort() implementations
7251 cdl_interface CYGINT_ISO_QSORT {
7252 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7253 # This value cannot be modified here.
7256 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7257 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7260 # The following properties are affected by this value
7263 # qsort() implementation header
7265 cdl_option CYGBLD_ISO_QSORT_HEADER {
7267 # No user value, uncomment the following line to provide one.
7269 # value_source default
7270 # Default value: 0 0
7273 # abs()/labs() implementations
7275 cdl_interface CYGINT_ISO_ABS {
7276 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7277 # This value cannot be modified here.
7280 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7281 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7284 # The following properties are affected by this value
7287 # abs()/labs() implementation header
7289 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7291 # No user value, uncomment the following line to provide one.
7293 # The inferred value should not be edited directly.
7294 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7295 # value_source inferred
7296 # Default value: 0 0
7298 # The following properties are affected by this value
7299 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7300 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7303 # div()/ldiv() implementations
7305 cdl_interface CYGINT_ISO_DIV {
7306 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7307 # This value cannot be modified here.
7310 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7311 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7314 # The following properties are affected by this value
7317 # div()/ldiv() implementation header
7319 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7321 # No user value, uncomment the following line to provide one.
7323 # The inferred value should not be edited directly.
7324 inferred_value 1 <cyg/libc/stdlib/div.inl>
7325 # value_source inferred
7326 # Default value: 0 0
7328 # The following properties are affected by this value
7329 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7330 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7333 # Header defining the implementation's MB_CUR_MAX
7335 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7337 # No user value, uncomment the following line to provide one.
7339 # value_source default
7340 # Default value: 0 0
7342 # The following properties are affected by this value
7343 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7344 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7347 # Multibyte character implementations
7349 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7350 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7351 # This value cannot be modified here.
7354 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7355 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7358 # The following properties are affected by this value
7359 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7360 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7363 # Multibyte character implementation header
7365 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7367 # No user value, uncomment the following line to provide one.
7369 # value_source default
7370 # Default value: 0 0
7376 cdl_component CYGPKG_ISO_STRING {
7377 # There is no associated value.
7381 # Number of implementations of strerror() function
7383 cdl_interface CYGINT_ISO_STRERROR {
7384 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7385 # This value cannot be modified here.
7387 # Current value: 1 1
7388 # Requires: 1 >= CYGINT_ISO_STRERROR
7389 # CYGINT_ISO_STRERROR == 1
7392 # The following properties are affected by this value
7393 # interface CYGINT_ISO_STRERROR
7394 # Requires: 1 >= CYGINT_ISO_STRERROR
7397 # strerror() implementation header
7399 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7401 # No user value, uncomment the following line to provide one.
7403 # The inferred value should not be edited directly.
7404 inferred_value 1 <cyg/error/strerror.h>
7405 # value_source inferred
7406 # Default value: 0 0
7408 # The following properties are affected by this value
7409 # option CYGPKG_ERROR_STRERROR
7410 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7413 # memcpy() implementation header
7415 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7417 # No user value, uncomment the following line to provide one.
7419 # value_source default
7420 # Default value: 0 0
7423 # memset() implementation header
7425 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7427 # No user value, uncomment the following line to provide one.
7429 # value_source default
7430 # Default value: 0 0
7433 # Number of implementations of strtok_r() function
7435 cdl_interface CYGINT_ISO_STRTOK_R {
7436 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7437 # This value cannot be modified here.
7439 # Current value: 1 1
7440 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7441 # CYGINT_ISO_STRTOK_R == 1
7444 # The following properties are affected by this value
7445 # interface CYGINT_ISO_STRTOK_R
7446 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7449 # strtok_r() implementation header
7451 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7453 # No user value, uncomment the following line to provide one.
7455 # The inferred value should not be edited directly.
7456 inferred_value 1 <cyg/libc/string/string.h>
7457 # value_source inferred
7458 # Default value: 0 0
7460 # The following properties are affected by this value
7461 # package CYGPKG_LIBC_STRING
7462 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7465 # Number of implementations of locale-specific string functions
7466 # This covers locale-dependent string functions such as strcoll()
7469 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7470 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7471 # This value cannot be modified here.
7473 # Current value: 1 1
7474 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7475 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7478 # The following properties are affected by this value
7479 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7480 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7483 # Locale-specific string functions' implementation header
7484 # This covers locale-dependent string functions such as strcoll()
7487 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7489 # No user value, uncomment the following line to provide one.
7491 # The inferred value should not be edited directly.
7492 inferred_value 1 <cyg/libc/string/string.h>
7493 # value_source inferred
7494 # Default value: 0 0
7496 # The following properties are affected by this value
7497 # package CYGPKG_LIBC_STRING
7498 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7501 # Number of implementations of BSD string functions
7503 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7504 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7505 # This value cannot be modified here.
7507 # Current value: 0 0
7508 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7509 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7512 # The following properties are affected by this value
7513 # interface CYGINT_ISO_STRING_BSD_FUNCS
7514 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7517 # BSD string functions' implementation header
7519 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7521 # No user value, uncomment the following line to provide one.
7523 # The inferred value should not be edited directly.
7524 inferred_value 1 <cyg/libc/string/bsdstring.h>
7525 # value_source inferred
7526 # Default value: 0 0
7528 # The following properties are affected by this value
7529 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7530 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7533 # Number of implementations of other mem*() functions
7535 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7536 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7537 # This value cannot be modified here.
7539 # Current value: 1 1
7540 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7541 # CYGINT_ISO_STRING_MEMFUNCS == 1
7544 # The following properties are affected by this value
7545 # interface CYGINT_ISO_STRING_MEMFUNCS
7546 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7547 # component CYGBLD_BUILD_REDBOOT
7548 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7549 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7550 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7553 # Other mem*() functions' implementation header
7555 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7557 # No user value, uncomment the following line to provide one.
7559 # The inferred value should not be edited directly.
7560 inferred_value 1 <cyg/libc/string/string.h>
7561 # value_source inferred
7562 # Default value: 0 0
7564 # The following properties are affected by this value
7565 # package CYGPKG_LIBC_STRING
7566 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7569 # Number of implementations of other ISO C str*() functions
7570 # This covers the other str*() functions defined by ISO C.
7572 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7573 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7574 # This value cannot be modified here.
7576 # Current value: 1 1
7577 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7578 # CYGINT_ISO_STRING_STRFUNCS == 1
7581 # The following properties are affected by this value
7582 # interface CYGINT_ISO_STRING_STRFUNCS
7583 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7584 # option CYGFUN_INFRA_DUMMY_STRLEN
7585 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7586 # option CYGFUN_INFRA_DUMMY_STRLEN
7587 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7588 # component CYGBLD_BUILD_REDBOOT
7589 # Requires: CYGINT_ISO_STRING_STRFUNCS
7590 # component CYGPKG_IO_ETH_DRIVERS_NET
7591 # Requires: CYGINT_ISO_STRING_STRFUNCS
7592 # option CYGFUN_COMPRESS_ZLIB_GZIO
7593 # Requires: CYGINT_ISO_STRING_STRFUNCS
7594 # package CYGPKG_IO_FLASH
7595 # Requires: CYGINT_ISO_STRING_STRFUNCS
7596 # package CYGPKG_LIBC_STDLIB
7597 # Requires: CYGINT_ISO_STRING_STRFUNCS
7600 # Other ISO C str*() functions' implementation header
7601 # This covers the other str*() functions defined by ISO C.
7603 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7605 # No user value, uncomment the following line to provide one.
7607 # The inferred value should not be edited directly.
7608 inferred_value 1 <cyg/libc/string/string.h>
7609 # value_source inferred
7610 # Default value: 0 0
7612 # The following properties are affected by this value
7613 # package CYGPKG_LIBC_STRING
7614 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7618 # Clock and time functionality
7620 cdl_component CYGPKG_ISO_TIME {
7621 # There is no associated value.
7625 # time_t implementation header
7627 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7629 # No user value, uncomment the following line to provide one.
7631 # value_source default
7632 # Default value: 0 0
7635 # clock_t implementation header
7637 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7639 # No user value, uncomment the following line to provide one.
7641 # value_source default
7642 # Default value: 0 0
7645 # struct timeval implementation header
7647 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7649 # No user value, uncomment the following line to provide one.
7651 # value_source default
7652 # Default value: 0 0
7655 # fnmatch implementation header
7657 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7659 # No user value, uncomment the following line to provide one.
7661 # value_source default
7662 # Default value: 0 0
7665 # Number of implementations of POSIX timer types
7667 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7668 # No options implement this inferface
7669 # This value cannot be modified here.
7671 # Current value: 0 0
7672 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7673 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7676 # The following properties are affected by this value
7677 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7678 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7681 # POSIX timer types implementation header
7683 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7685 # No user value, uncomment the following line to provide one.
7687 # value_source default
7688 # Default value: 0 0
7691 # Number of implementations of POSIX clock types
7693 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7694 # No options implement this inferface
7695 # This value cannot be modified here.
7697 # Current value: 0 0
7698 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7699 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7702 # The following properties are affected by this value
7703 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7704 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7707 # POSIX clock types implementation header
7709 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7711 # No user value, uncomment the following line to provide one.
7713 # value_source default
7714 # Default value: 0 0
7717 # Number of implementations of ISO C types
7719 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7720 # No options implement this inferface
7721 # This value cannot be modified here.
7723 # Current value: 0 0
7724 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7725 # CYGINT_ISO_C_TIME_TYPES == 0
7728 # The following properties are affected by this value
7729 # interface CYGINT_ISO_C_TIME_TYPES
7730 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7733 # ISO C time types implementation header
7735 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7737 # No user value, uncomment the following line to provide one.
7739 # value_source default
7740 # Default value: 0 0
7743 # Number of implementations of POSIX timers
7745 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7746 # No options implement this inferface
7747 # This value cannot be modified here.
7749 # Current value: 0 0
7750 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7751 # CYGINT_ISO_POSIX_TIMERS == 0
7754 # The following properties are affected by this value
7755 # interface CYGINT_ISO_POSIX_TIMERS
7756 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7759 # POSIX timer implementation header
7761 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7763 # No user value, uncomment the following line to provide one.
7765 # value_source default
7766 # Default value: 0 0
7769 # Number of implementations of POSIX clocks
7771 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7772 # No options implement this inferface
7773 # This value cannot be modified here.
7775 # Current value: 0 0
7776 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7777 # CYGINT_ISO_POSIX_CLOCKS == 0
7780 # The following properties are affected by this value
7781 # interface CYGINT_ISO_POSIX_CLOCKS
7782 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7785 # POSIX clocks implementation header
7787 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7789 # No user value, uncomment the following line to provide one.
7791 # value_source default
7792 # Default value: 0 0
7795 # Number of implementations of ISO C clock functions
7797 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7798 # No options implement this inferface
7799 # This value cannot be modified here.
7801 # Current value: 0 0
7802 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7803 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7806 # The following properties are affected by this value
7807 # interface CYGINT_ISO_C_CLOCK_FUNCS
7808 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7811 # ISO C clock functions' implementation header
7813 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7815 # No user value, uncomment the following line to provide one.
7817 # value_source default
7818 # Default value: 0 0
7821 # Number of implementations of tzset() function
7823 cdl_interface CYGINT_ISO_TZSET {
7824 # No options implement this inferface
7825 # This value cannot be modified here.
7827 # Current value: 0 0
7828 # Requires: 1 >= CYGINT_ISO_TZSET
7829 # CYGINT_ISO_TZSET == 0
7832 # The following properties are affected by this value
7833 # interface CYGINT_ISO_TZSET
7834 # Requires: 1 >= CYGINT_ISO_TZSET
7837 # tzset() implementation header
7839 cdl_option CYGBLD_ISO_TZSET_HEADER {
7841 # No user value, uncomment the following line to provide one.
7843 # value_source default
7844 # Default value: 0 0
7848 # Signal functionality
7850 cdl_component CYGPKG_ISO_SIGNAL {
7851 # There is no associated value.
7855 # Number of implementations of signal numbers
7857 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7858 # No options implement this inferface
7859 # This value cannot be modified here.
7862 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7863 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7866 # The following properties are affected by this value
7867 # interface CYGINT_ISO_SIGNAL_NUMBERS
7868 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7871 # Signal numbering implementation header
7872 # This header provides the mapping of signal
7873 # names (e.g. SIGBUS) to numbers.
7875 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7877 # No user value, uncomment the following line to provide one.
7879 # value_source default
7880 # Default value: 0 0
7883 # Number of signal implementations
7885 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7886 # No options implement this inferface
7887 # This value cannot be modified here.
7890 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7891 # CYGINT_ISO_SIGNAL_IMPL == 0
7894 # The following properties are affected by this value
7895 # interface CYGINT_ISO_SIGNAL_IMPL
7896 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7899 # Signals implementation header
7901 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7903 # No user value, uncomment the following line to provide one.
7905 # value_source default
7906 # Default value: 0 0
7909 # POSIX real time signals feature test macro
7910 # This defines the POSIX feature test macro
7911 # that indicates that the POSIX real time signals
7914 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7915 # No options implement this inferface
7916 # This value cannot be modified here.
7919 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7920 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7923 # The following properties are affected by this value
7924 # interface CYGINT_POSIX_REALTIME_SIGNALS
7925 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7929 # Non-local jumps functionality
7931 cdl_component CYGPKG_ISO_SETJMP {
7932 # There is no associated value.
7936 # setjmp() / longjmp() implementations
7938 cdl_interface CYGINT_ISO_SETJMP {
7939 # No options implement this inferface
7940 # This value cannot be modified here.
7943 # Requires: 1 >= CYGINT_ISO_SETJMP
7944 # CYGINT_ISO_SETJMP == 0
7947 # The following properties are affected by this value
7948 # interface CYGINT_ISO_SETJMP
7949 # Requires: 1 >= CYGINT_ISO_SETJMP
7952 # setjmp() / longjmp() implementation header
7954 cdl_option CYGBLD_ISO_SETJMP_HEADER {
7956 # No user value, uncomment the following line to provide one.
7958 # value_source default
7959 # Default value: 0 0
7962 # sigsetjmp() / siglongjmp() implementations
7964 cdl_interface CYGINT_ISO_SIGSETJMP {
7965 # No options implement this inferface
7966 # This value cannot be modified here.
7969 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7970 # CYGINT_ISO_SIGSETJMP == 0
7973 # The following properties are affected by this value
7974 # interface CYGINT_ISO_SIGSETJMP
7975 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7978 # sigsetjmp() / siglongjmp() implementation header
7980 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
7982 # No user value, uncomment the following line to provide one.
7984 # value_source default
7985 # Default value: 0 0
7989 # Assertions implementation header
7991 cdl_option CYGBLD_ISO_ASSERT_HEADER {
7993 # No user value, uncomment the following line to provide one.
7995 # value_source default
7996 # Default value: 0 0
7999 # POSIX file control
8000 # This covers the POSIX file control definitions,
8001 # normally found in <fcntl.h>
8003 cdl_component CYGPKG_ISO_POSIX_FCNTL {
8004 # There is no associated value.
8008 # POSIX open flags implementation header
8010 cdl_option CYGBLD_ISO_OFLAG_HEADER {
8012 # No user value, uncomment the following line to provide one.
8014 # value_source default
8015 # Default value: 0 0
8018 # POSIX fcntl() implementations
8020 cdl_interface CYGINT_ISO_FCNTL {
8021 # No options implement this inferface
8022 # This value cannot be modified here.
8025 # Requires: 1 >= CYGINT_ISO_FCNTL
8026 # CYGINT_ISO_FCNTL == 0
8029 # The following properties are affected by this value
8030 # interface CYGINT_ISO_FCNTL
8031 # Requires: 1 >= CYGINT_ISO_FCNTL
8034 # POSIX fcntl() implementation header
8036 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8038 # No user value, uncomment the following line to provide one.
8040 # value_source default
8041 # Default value: 0 0
8044 # POSIX file open implementations
8046 cdl_interface CYGINT_ISO_OPEN {
8047 # No options implement this inferface
8048 # This value cannot be modified here.
8051 # Requires: 1 >= CYGINT_ISO_OPEN
8052 # CYGINT_ISO_OPEN == 0
8055 # The following properties are affected by this value
8056 # interface CYGINT_ISO_OPEN
8057 # Requires: 1 >= CYGINT_ISO_OPEN
8060 # POSIX file open implementation header
8062 cdl_option CYGBLD_ISO_OPEN_HEADER {
8064 # No user value, uncomment the following line to provide one.
8066 # value_source default
8067 # Default value: 0 0
8071 # <sys/stat.h> definitions implementation header
8073 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8075 # No user value, uncomment the following line to provide one.
8077 # value_source default
8078 # Default value: 0 0
8081 # POSIX directory reading implementation
8083 cdl_interface CYGINT_ISO_DIRENT {
8084 # No options implement this inferface
8085 # This value cannot be modified here.
8088 # Requires: 1 >= CYGINT_ISO_DIRENT
8089 # CYGINT_ISO_DIRENT == 0
8092 # The following properties are affected by this value
8093 # interface CYGINT_ISO_DIRENT
8094 # Requires: 1 >= CYGINT_ISO_DIRENT
8097 # <dirent.h> definitions implementation header
8099 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8101 # No user value, uncomment the following line to provide one.
8103 # value_source default
8104 # Default value: 0 0
8107 # POSIX <sys/types.h> contents
8108 # This covers the types required by POSIX to be in
8111 cdl_component CYGPKG_ISO_POSIX_TYPES {
8112 # There is no associated value.
8116 # POSIX thread types implementations
8118 cdl_interface CYGINT_ISO_PTHREADTYPES {
8119 # No options implement this inferface
8120 # This value cannot be modified here.
8123 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8124 # CYGINT_ISO_PTHREADTYPES == 0
8127 # The following properties are affected by this value
8128 # interface CYGINT_ISO_PTHREADTYPES
8129 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8130 # interface CYGINT_ISO_PMUTEXTYPES
8131 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8134 # POSIX thread types implementation header
8136 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8138 # No user value, uncomment the following line to provide one.
8140 # value_source default
8141 # Default value: 0 0
8144 # POSIX mutex types implementations
8146 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8147 # No options implement this inferface
8148 # This value cannot be modified here.
8151 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8152 # CYGINT_ISO_PTHREADTYPES == 0
8156 # POSIX mutex types implementation header
8158 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8160 # No user value, uncomment the following line to provide one.
8162 # value_source default
8163 # Default value: 0 0
8166 # ssize_t implementation header
8168 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8170 # No user value, uncomment the following line to provide one.
8172 # value_source default
8173 # Default value: 0 0
8176 # Filesystem types implementation header
8178 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8180 # No user value, uncomment the following line to provide one.
8182 # value_source default
8183 # Default value: 0 0
8186 # gid_t, pid_t, uid_t implementation header
8188 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8190 # No user value, uncomment the following line to provide one.
8192 # value_source default
8193 # Default value: 0 0
8197 # Non-POSIX <sys/types.h> contents
8198 # This covers the extra types required by non-POSIX
8199 # packages to be in <sys/types.h>. These would normally
8200 # only be visible if _POSIX_SOURCE is not defined.
8202 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8203 # There is no associated value.
8207 # BSD compatible types
8209 cdl_interface CYGINT_ISO_BSDTYPES {
8210 # No options implement this inferface
8211 # This value cannot be modified here.
8214 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8215 # CYGINT_ISO_BSDTYPES == 0
8218 # The following properties are affected by this value
8219 # interface CYGINT_ISO_BSDTYPES
8220 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8225 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8227 # No user value, uncomment the following line to provide one.
8229 # value_source default
8230 # Default value: 0 0
8236 cdl_component CYGPKG_ISO_UTSNAME {
8237 # There is no associated value.
8243 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8245 # No user value, uncomment the following line to provide one.
8247 # value_source default
8248 # Default value: 0 0
8254 cdl_component CYGPKG_ISO_SCHED {
8255 # There is no associated value.
8259 # POSIX scheduler implementations
8261 cdl_interface CYGINT_ISO_SCHED_IMPL {
8262 # No options implement this inferface
8263 # This value cannot be modified here.
8266 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8267 # CYGINT_ISO_SCHED_IMPL == 0
8270 # The following properties are affected by this value
8271 # interface CYGINT_ISO_SCHED_IMPL
8272 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8275 # POSIX scheduler implementation header
8277 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8279 # No user value, uncomment the following line to provide one.
8281 # value_source default
8282 # Default value: 0 0
8288 cdl_component CYGPKG_ISO_SEMAPHORES {
8289 # There is no associated value.
8293 # POSIX semaphore implementations
8295 cdl_interface CYGINT_ISO_SEMAPHORES {
8296 # No options implement this inferface
8297 # This value cannot be modified here.
8300 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8301 # CYGINT_ISO_SEMAPHORES == 0
8304 # The following properties are affected by this value
8305 # interface CYGINT_ISO_SEMAPHORES
8306 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8309 # POSIX semaphore implementation header
8311 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8313 # No user value, uncomment the following line to provide one.
8315 # value_source default
8316 # Default value: 0 0
8320 # POSIX message queues
8322 cdl_component CYGPKG_ISO_MQUEUE {
8323 # There is no associated value.
8329 cdl_interface CYGINT_ISO_MQUEUE {
8330 # No options implement this inferface
8331 # This value cannot be modified here.
8334 # Requires: 1 >= CYGINT_ISO_MQUEUE
8335 # CYGINT_ISO_MQUEUE == 0
8338 # The following properties are affected by this value
8339 # interface CYGINT_ISO_MQUEUE
8340 # Requires: 1 >= CYGINT_ISO_MQUEUE
8341 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8342 # ActiveIf: CYGINT_ISO_MQUEUE
8343 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8344 # ActiveIf: CYGINT_ISO_MQUEUE
8347 # Implementation header
8349 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8351 # No user value, uncomment the following line to provide one.
8353 # value_source default
8354 # Default value: 0 0
8357 # Maximum number of open message queues
8359 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8360 # This option is not active
8361 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8362 # CYGINT_ISO_MQUEUE == 0
8366 # No user value, uncomment the following line to provide one.
8368 # value_source default
8369 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8370 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8371 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8375 # Maximum number of message priorities
8377 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8378 # This option is not active
8379 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8380 # CYGINT_ISO_MQUEUE == 0
8384 # No user value, uncomment the following line to provide one.
8385 # user_value 1 65535
8386 # value_source default
8387 # Default value: 1 65535
8393 cdl_component CYGPKG_ISO_PTHREAD {
8394 # There is no associated value.
8398 # POSIX pthread implementations
8400 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8401 # No options implement this inferface
8402 # This value cannot be modified here.
8404 # Current value: 0 0
8405 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8406 # CYGINT_ISO_PTHREAD_IMPL == 0
8409 # The following properties are affected by this value
8410 # interface CYGINT_ISO_PTHREAD_IMPL
8411 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8414 # POSIX pthread implementation header
8416 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8418 # No user value, uncomment the following line to provide one.
8420 # value_source default
8421 # Default value: 0 0
8424 # POSIX mutex/cond var implementations
8426 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8427 # No options implement this inferface
8428 # This value cannot be modified here.
8430 # Current value: 0 0
8431 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8432 # CYGINT_ISO_PTHREAD_MUTEX == 0
8435 # The following properties are affected by this value
8436 # interface CYGINT_ISO_PTHREAD_MUTEX
8437 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8440 # POSIX mutex/cond var implementation header
8442 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8444 # No user value, uncomment the following line to provide one.
8446 # value_source default
8447 # Default value: 0 0
8453 cdl_component CYGPKG_ISO_LIMITS {
8454 # There is no associated value.
8458 # POSIX pthread limits implementations
8460 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8461 # No options implement this inferface
8462 # This value cannot be modified here.
8465 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8466 # CYGINT_ISO_POSIX_LIMITS == 0
8469 # The following properties are affected by this value
8470 # interface CYGINT_ISO_POSIX_LIMITS
8471 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8474 # POSIX pthread limits implementation header
8476 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8478 # No user value, uncomment the following line to provide one.
8480 # value_source default
8481 # Default value: 0 0
8484 # OPEN_MAX implementation header
8486 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8488 # No user value, uncomment the following line to provide one.
8490 # value_source default
8491 # Default value: 0 0
8494 # LINK_MAX implementation header
8496 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8498 # No user value, uncomment the following line to provide one.
8500 # value_source default
8501 # Default value: 0 0
8504 # NAME_MAX implementation header
8506 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8508 # No user value, uncomment the following line to provide one.
8510 # value_source default
8511 # Default value: 0 0
8514 # PATH_MAX implementation header
8516 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8518 # No user value, uncomment the following line to provide one.
8520 # value_source default
8521 # Default value: 0 0
8527 cdl_component CYGPKG_ISO_TERMIOS {
8528 # There is no associated value.
8532 # POSIX termios implementations
8534 cdl_interface CYGINT_ISO_TERMIOS {
8535 # No options implement this inferface
8536 # This value cannot be modified here.
8539 # Requires: 1 >= CYGINT_ISO_TERMIOS
8540 # CYGINT_ISO_TERMIOS == 0
8543 # The following properties are affected by this value
8544 # interface CYGINT_ISO_TERMIOS
8545 # Requires: 1 >= CYGINT_ISO_TERMIOS
8548 # POSIX termios implementation header
8550 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8552 # No user value, uncomment the following line to provide one.
8554 # value_source default
8555 # Default value: 0 0
8561 cdl_component CYGPKG_ISO_DLFCN {
8562 # There is no associated value.
8566 # Dynamic load implementations
8568 cdl_interface CYGINT_ISO_DLFCN {
8569 # No options implement this inferface
8570 # This value cannot be modified here.
8573 # Requires: 1 >= CYGINT_ISO_DLFCN
8574 # CYGINT_ISO_DLFCN == 0
8577 # The following properties are affected by this value
8578 # interface CYGINT_ISO_DLFCN
8579 # Requires: 1 >= CYGINT_ISO_DLFCN
8582 # Dynamic load implementation header
8584 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8586 # No user value, uncomment the following line to provide one.
8588 # value_source default
8589 # Default value: 0 0
8593 # UNIX standard functions
8595 cdl_component CYGPKG_ISO_UNISTD {
8596 # There is no associated value.
8600 # POSIX timer operations implementations
8602 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8603 # No options implement this inferface
8604 # This value cannot be modified here.
8606 # Current value: 0 0
8607 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8608 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8611 # The following properties are affected by this value
8612 # interface CYGINT_ISO_POSIX_TIMER_OPS
8613 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8616 # POSIX timer operations implementation header
8618 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8620 # No user value, uncomment the following line to provide one.
8622 # value_source default
8623 # Default value: 0 0
8626 # POSIX sleep() implementations
8628 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8629 # No options implement this inferface
8630 # This value cannot be modified here.
8632 # Current value: 0 0
8633 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8634 # CYGINT_ISO_POSIX_SLEEP == 0
8637 # The following properties are affected by this value
8638 # interface CYGINT_ISO_POSIX_SLEEP
8639 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8642 # POSIX sleep() implementation header
8644 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8646 # No user value, uncomment the following line to provide one.
8648 # value_source default
8649 # Default value: 0 0
8653 # select()/poll() functions
8655 cdl_component CYGPKG_ISO_SELECT {
8656 # There is no associated value.
8660 # select() implementations
8662 cdl_interface CYGINT_ISO_SELECT {
8663 # No options implement this inferface
8664 # This value cannot be modified here.
8666 # Current value: 0 0
8667 # Requires: 1 >= CYGINT_ISO_SELECT
8668 # CYGINT_ISO_SELECT == 0
8671 # The following properties are affected by this value
8672 # interface CYGINT_ISO_SELECT
8673 # Requires: 1 >= CYGINT_ISO_SELECT
8676 # select() implementation header
8678 cdl_option CYGBLD_ISO_SELECT_HEADER {
8680 # No user value, uncomment the following line to provide one.
8682 # value_source default
8683 # Default value: 0 0
8686 # poll() implementations
8688 cdl_interface CYGINT_ISO_POLL {
8689 # No options implement this inferface
8690 # This value cannot be modified here.
8692 # Current value: 0 0
8693 # Requires: 1 >= CYGINT_ISO_POLL
8694 # CYGINT_ISO_POLL == 0
8697 # The following properties are affected by this value
8698 # interface CYGINT_ISO_POLL
8699 # Requires: 1 >= CYGINT_ISO_POLL
8702 # poll() implementation header
8704 cdl_option CYGBLD_ISO_POLL_HEADER {
8706 # No user value, uncomment the following line to provide one.
8708 # value_source default
8709 # Default value: 0 0
8713 # NetDB utility functions
8715 cdl_component CYGPKG_ISO_NETDB {
8716 # There is no associated value.
8720 # DNS implementations
8722 cdl_interface CYGINT_ISO_DNS {
8723 # No options implement this inferface
8724 # This value cannot be modified here.
8727 # Requires: 1 >= CYGINT_ISO_DNS
8728 # CYGINT_ISO_DNS == 0
8731 # The following properties are affected by this value
8732 # interface CYGINT_ISO_DNS
8733 # Requires: 1 >= CYGINT_ISO_DNS
8736 # DNS implementation header
8738 cdl_option CYGBLD_ISO_DNS_HEADER {
8740 # No user value, uncomment the following line to provide one.
8742 # value_source default
8743 # Default value: 0 0
8746 # Protocol network database implementations
8748 cdl_interface CYGINT_ISO_NETDB_PROTO {
8749 # No options implement this inferface
8750 # This value cannot be modified here.
8753 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8754 # CYGINT_ISO_NETDB_PROTO == 0
8757 # The following properties are affected by this value
8758 # interface CYGINT_ISO_NETDB_PROTO
8759 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8762 # Protocol network database implementation header
8764 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8766 # No user value, uncomment the following line to provide one.
8768 # value_source default
8769 # Default value: 0 0
8772 # Services network database implementations
8774 cdl_interface CYGINT_ISO_NETDB_SERV {
8775 # No options implement this inferface
8776 # This value cannot be modified here.
8779 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8780 # CYGINT_ISO_NETDB_SERV == 0
8783 # The following properties are affected by this value
8784 # interface CYGINT_ISO_NETDB_SERV
8785 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8788 # Services network database implementation header
8790 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8792 # No user value, uncomment the following line to provide one.
8794 # value_source default
8795 # Default value: 0 0
8800 # Package specific build options including control over
8801 # compiler flags used only in building this package,
8802 # and details of which tests are built.
8804 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8805 # There is no associated value.
8809 # Additional compiler flags
8810 # This option modifies the set of compiler flags for
8811 # building the ISO C and POSIX infrastructure package.
8812 # These flags are used in addition to the set of global flags.
8814 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8816 # No user value, uncomment the following line to provide one.
8818 # value_source default
8822 # Suppressed compiler flags
8823 # This option modifies the set of compiler flags for
8824 # building the ISO C and POSIX infrastructure package.
8825 # These flags are removed from the set of global flags
8828 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8830 # No user value, uncomment the following line to provide one.
8832 # value_source default
8839 # doc: ref/services-crc.html
8840 # This package provides support for CRC calculation. Currently
8841 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8842 # Gary S. Brown, and a 16 bit CRC.
8844 cdl_package CYGPKG_CRC {
8845 # Packages cannot be added or removed, nor can their version be changed,
8846 # simply by editing their value. Instead the appropriate configuration
8847 # should be used to perform these actions.
8849 # This value cannot be modified here.
8851 # Current value: 1 current
8853 # The following properties are affected by this value
8854 # package CYGPKG_COMPRESS_ZLIB
8855 # Requires: CYGPKG_CRC
8861 cdl_option CYGPKG_CRC_TESTS {
8862 # Calculated value: "tests/crc_test"
8864 # Current_value: tests/crc_test
8868 # Zlib compress and decompress package
8869 # This package provides support for compression and
8872 cdl_package CYGPKG_COMPRESS_ZLIB {
8873 # Packages cannot be added or removed, nor can their version be changed,
8874 # simply by editing their value. Instead the appropriate configuration
8875 # should be used to perform these actions.
8877 # This value cannot be modified here.
8879 # Current value: 1 current
8880 # Requires: CYGPKG_ISOINFRA
8881 # CYGPKG_ISOINFRA == current
8883 # Requires: CYGPKG_CRC
8884 # CYGPKG_CRC == current
8887 # The following properties are affected by this value
8888 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8889 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8893 # Override memory allocation routines.
8895 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8896 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8897 # This value cannot be modified here.
8901 # The following properties are affected by this value
8902 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8903 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8906 # Should deflate() produce 'gzip' compatible output?
8907 # If this option is set then the output of calling deflate()
8908 # will be wrapped up as a 'gzip' compatible file.
8910 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8912 # No user value, uncomment the following line to provide one.
8914 # value_source default
8918 # Does this library need malloc?
8919 # This pseudo-option will force the memalloc library to be
8920 # required iff the application does not provide it's own
8923 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8924 # This option is not active
8925 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8926 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8930 # No user value, uncomment the following line to provide one.
8932 # value_source default
8934 # Requires: CYGPKG_MEMALLOC
8935 # CYGPKG_MEMALLOC == current
8939 # Include stdio-like utility functions
8940 # This option enables the stdio-like zlib utility functions
8941 # (gzread/gzwrite and friends) provided in gzio.c.
8943 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
8945 # No user value, uncomment the following line to provide one.
8947 # value_source default
8948 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
8949 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
8951 # Requires: CYGINT_ISO_STDIO_FILEPOS
8952 # CYGINT_ISO_STDIO_FILEPOS == 0
8954 # Requires: CYGINT_ISO_STRING_STRFUNCS
8955 # CYGINT_ISO_STRING_STRFUNCS == 1
8957 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
8958 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
8960 # Requires: CYGINT_ISO_STDIO_FILEACCESS
8961 # CYGINT_ISO_STDIO_FILEACCESS == 0
8965 # Zlib compress and decompress package build options
8966 # Package specific build options including control over
8967 # compiler flags used only in building this package,
8968 # and details of which tests are built.
8970 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
8971 # There is no associated value.
8975 # Additional compiler flags
8976 # This option modifies the set of compiler flags for
8977 # building this package. These flags are used in addition
8978 # to the set of global flags.
8980 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
8982 # No user value, uncomment the following line to provide one.
8983 # user_value "-D__ECOS__ -DNO_ERRNO_H"
8984 # value_source default
8985 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
8988 # Suppressed compiler flags
8989 # This option modifies the set of compiler flags for
8990 # building this package. These flags are removed from
8991 # the set of global flags if present.
8993 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
8995 # No user value, uncomment the following line to provide one.
8996 # user_value -Wstrict-prototypes
8997 # value_source default
8998 # Default value: -Wstrict-prototypes
9001 # Additional compiler flags
9002 # This option modifies the set of compiler flags for
9003 # building this package. These flags are used in addition
9004 # to the set of global flags.
9006 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
9008 # No user value, uncomment the following line to provide one.
9010 # value_source default
9014 # Suppressed compiler flags
9015 # This option modifies the set of compiler flags for
9016 # building this package. These flags are removed from
9017 # the set of global flags if present.
9019 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9021 # No user value, uncomment the following line to provide one.
9023 # value_source default
9030 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9031 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9033 # Current_value: tests/zlib1.c tests/zlib2.c
9037 # FLASH device drivers
9038 # doc: ref/flash.html
9039 # This option enables drivers for basic I/O services on
9042 cdl_package CYGPKG_IO_FLASH {
9043 # Packages cannot be added or removed, nor can their version be changed,
9044 # simply by editing their value. Instead the appropriate configuration
9045 # should be used to perform these actions.
9047 # This value cannot be modified here.
9049 # Current value: 1 current
9050 # Requires: CYGPKG_ISOINFRA
9051 # CYGPKG_ISOINFRA == current
9053 # Requires: CYGINT_ISO_STRING_STRFUNCS
9054 # CYGINT_ISO_STRING_STRFUNCS == 1
9057 # The following properties are affected by this value
9058 # component CYGSEM_REDBOOT_FLASH_CONFIG
9059 # DefaultValue: CYGPKG_IO_FLASH != 0
9060 # package CYGPKG_DEVS_FLASH_ONMXC
9061 # ActiveIf: CYGPKG_IO_FLASH
9065 # Hardware FLASH device drivers
9066 # This option enables the hardware device drivers
9067 # for the current platform.
9069 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9070 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9071 # This value cannot be modified here.
9075 # The following properties are affected by this value
9076 # component CYGPKG_REDBOOT_FLASH
9077 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9080 # Hardware FLASH device drivers are not in RAM
9081 # Use of this interface is deprecated.
9082 # Drivers should make sure that the functions are
9083 # linked to RAM by putting them in .2ram sections.
9085 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9086 # No options implement this inferface
9087 # This value cannot be modified here.
9089 # Current value: 0 0
9090 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9091 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9094 # The following properties are affected by this value
9095 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9096 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9099 # Hardware can support block locking
9100 # This option will be enabled by devices which can support
9101 # locking (write-protection) of individual blocks.
9103 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9104 # No options implement this inferface
9105 # This value cannot be modified here.
9107 # Current value: 0 0
9109 # The following properties are affected by this value
9110 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9111 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9114 # Hardware cannot support direct access to FLASH memory
9115 # This option will be asserted by devices which cannot support
9116 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9117 # devices). In these cases, the driver must provide an appropriate
9118 # hardware access function.
9120 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9122 # No user value, uncomment the following line to provide one.
9124 # The inferred value should not be edited directly.
9126 # value_source inferred
9128 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9129 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9132 # The following properties are affected by this value
9133 # option CYGPRI_REDBOOT_ZLIB_FLASH
9134 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9135 # component CYGHWR_DEVS_FLASH_MMC
9136 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9137 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9138 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9139 # option CYGHWR_DEVS_FLASH_MMC_SD
9140 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9141 # option CYGHWR_DEVS_FLASH_MXC_NAND
9142 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9145 # Display status messages during flash operations
9146 # Selecting this option will cause the drivers to print status
9147 # messages as various flash operations are undertaken.
9149 cdl_option CYGSEM_IO_FLASH_CHATTER {
9151 # No user value, uncomment the following line to provide one.
9153 # value_source default
9157 # Verify data programmed to flash
9158 # Selecting this option will cause verification of data
9159 # programmed to flash.
9161 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9163 # No user value, uncomment the following line to provide one.
9165 # The inferred value should not be edited directly.
9167 # value_source inferred
9170 # The following properties are affected by this value
9171 # option CYGSEM_IO_FLASH_READ_INDIRECT
9172 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9175 # Platform has flash soft DIP switch write-protect
9176 # Selecting this option will cause the state of a hardware jumper or
9177 # dipswitch to be read by software to determine whether the flash is
9178 # write-protected or not.
9180 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9182 # No user value, uncomment the following line to provide one.
9184 # value_source default
9188 # Instantiate in I/O block device API
9189 # Provides a block device accessible using the standard I/O
9190 # API ( cyg_io_read() etc. )
9192 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9193 # This option is not active
9194 # ActiveIf constraint: CYGPKG_IO
9195 # CYGPKG_IO (unknown) == 0
9199 # No user value, uncomment the following line to provide one.
9201 # value_source default
9206 # Name of flash device 1 block device
9208 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9209 # This option is not active
9210 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9211 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9214 # No user value, uncomment the following line to provide one.
9215 # user_value "\"/dev/flash1\""
9216 # value_source default
9217 # Default value: "\"/dev/flash1\""
9222 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9223 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9224 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9225 # This option is not active
9226 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9228 # This value cannot be modified here.
9231 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9232 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9235 # The following properties are affected by this value
9236 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9237 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9240 # Static configuration
9241 # This configures the flash device 1 block device
9242 # with static base and length
9244 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9245 # This option is not active
9246 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9249 # No user value, uncomment the following line to provide one.
9251 # value_source default
9256 # Start offset from flash base
9257 # This gives the offset from the base of flash which this
9258 # block device corresponds to.
9260 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9261 # This option is not active
9262 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9265 # No user value, uncomment the following line to provide one.
9266 # user_value 0x00100000
9267 # value_source default
9268 # Default value: 0x00100000
9272 # This gives the length of the region of flash given over
9273 # to this block device.
9275 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9276 # This option is not active
9277 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9280 # No user value, uncomment the following line to provide one.
9281 # user_value 0x00100000
9282 # value_source default
9283 # Default value: 0x00100000
9287 # Configuration from FIS
9288 # This configures the flash device 1 block device
9291 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9292 # This option is not active
9293 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9296 # No user value, uncomment the following line to provide one.
9298 # value_source default
9305 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9306 # This option is not active
9307 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9308 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9311 # No user value, uncomment the following line to provide one.
9312 # user_value "\"jffs2\""
9313 # value_source default
9314 # Default value: "\"jffs2\""
9320 # Flash device driver build options
9321 # Package specific build options including control over
9322 # compiler flags used only in building this package,
9323 # and details of which tests are built.
9325 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9326 # There is no associated value.
9330 # Additional compiler flags
9331 # This option modifies the set of compiler flags for
9332 # building the flash device drivers. These flags are used in addition
9333 # to the set of global flags.
9335 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9337 # No user value, uncomment the following line to provide one.
9339 # value_source default
9343 # Suppressed compiler flags
9344 # This option modifies the set of compiler flags for
9345 # building the flash device drivers. These flags are removed from
9346 # the set of global flags if present.
9348 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9350 # No user value, uncomment the following line to provide one.
9352 # value_source default
9356 # Flash device driver tests
9357 # This option specifies the set of tests for the flash device drivers.
9359 cdl_component CYGPKG_IO_FLASH_TESTS {
9360 # Calculated value: "tests/flash1"
9362 # Current_value: tests/flash1
9366 # Start offset from flash base
9367 # This gives the offset from the base of flash where tests
9368 # can be run. It is important to set this correctly, as an
9369 # incorrect value could allow the tests to write over critical
9370 # portions of the FLASH device and possibly render the target
9371 # board totally non-functional.
9373 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9375 # No user value, uncomment the following line to provide one.
9376 # user_value 0x00100000
9377 # value_source default
9378 # Default value: 0x00100000
9382 # This gives the length of the region of flash used for testing.
9384 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9386 # No user value, uncomment the following line to provide one.
9387 # user_value 0x00100000
9388 # value_source default
9389 # Default value: 0x00100000
9394 # Support FLASH memory on Freescale MXC platforms
9396 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9397 # Packages cannot be added or removed, nor can their version be changed,
9398 # simply by editing their value. Instead the appropriate configuration
9399 # should be used to perform these actions.
9401 # ActiveIf constraint: CYGPKG_IO_FLASH
9402 # CYGPKG_IO_FLASH == current
9405 # This value cannot be modified here.
9407 # Current value: 1 current
9411 # MXC platform MMC card support
9412 # When this option is enabled, it indicates MMC card is
9413 # supported on the MXC platforms
9415 cdl_component CYGHWR_DEVS_FLASH_MMC {
9417 # No user value, uncomment the following line to provide one.
9419 # value_source default
9421 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9422 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9425 # The following properties are affected by this value
9426 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9427 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9428 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9429 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9430 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9431 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9432 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9433 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9437 # MXC platform MMC card for newer SDHC controllers
9439 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9440 # This option is not active
9441 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9442 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37_3STACK || CYGPKG_HAL_ARM_MX35_3STACK || CYGPKG_HAL_ARM_MX25_3STACK || CYGPKG_HAL_ARM_MX51
9443 # CYGPKG_HAL_ARM_MX37_3STACK (unknown) == 0
9444 # CYGPKG_HAL_ARM_MX35_3STACK (unknown) == 0
9445 # CYGPKG_HAL_ARM_MX25_3STACK (unknown) == 0
9446 # CYGPKG_HAL_ARM_MX51 (unknown) == 0
9450 # No user value, uncomment the following line to provide one.
9452 # value_source default
9454 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9455 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9459 # MXC platform MMC card for older MMC/SD controllers
9461 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9462 # This option is not active
9463 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9464 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9465 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9466 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9470 # No user value, uncomment the following line to provide one.
9472 # value_source default
9474 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9475 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9480 # MXC platform NOR flash memory support
9481 # When this option is enabled, it indicates NOR flash is
9482 # supported on the MXC platforms
9484 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9486 # No user value, uncomment the following line to provide one.
9488 # The inferred value should not be edited directly.
9490 # value_source inferred
9493 # The following properties are affected by this value
9494 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9495 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9496 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9497 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9498 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9499 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9500 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9501 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9502 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9503 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9506 # MXC platform NAND flash memory support
9507 # When this option is enabled, it indicates NAND flash is
9508 # supported on the MXC platforms
9510 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9512 # No user value, uncomment the following line to provide one.
9514 # The inferred value should not be edited directly.
9516 # value_source inferred
9518 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9519 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9522 # The following properties are affected by this value
9523 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9524 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9525 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9526 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9527 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9528 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9529 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9530 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9531 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9532 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9533 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9534 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9537 # i.MX platform SPI NOR flash memory support
9538 # When this option is enabled, it indicates SPI NOR flash is
9539 # supported on the i.MX platforms
9541 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9543 # No user value, uncomment the following line to provide one.
9545 # value_source default
9547 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9548 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9552 # MXC platform ATA support
9553 # When this option is enabled, it indicates ATA is
9554 # supported on the MXC platforms
9556 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9558 # No user value, uncomment the following line to provide one.
9560 # value_source default
9564 # Use a flash based Bad Block Table
9566 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9567 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9568 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9571 # There is no associated value.
9575 # When this option is enabled, the driver will search for a flash
9576 # based bad block table
9578 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9580 # No user value, uncomment the following line to provide one.
9582 # value_source default
9586 # header file defining the NAND BBT descriptor
9587 # defines the name of the header file that describes the BBT layout
9589 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9591 # No user value, uncomment the following line to provide one.
9593 # The inferred value should not be edited directly.
9594 inferred_value 1 <cyg/io/tx27_nand_bbt.h>
9595 # value_source inferred
9596 # Default value: 0 0
9599 # Number of blocks to reserve for BBT
9600 # Number of blocks to reserve for BBT
9602 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9604 # No user value, uncomment the following line to provide one.
9606 # value_source default
9611 # MXC platform multi flash memory support
9612 # When this option is enabled, it indicates multi flashes are
9613 # supported on the MXC platforms (like NAND and NOR)
9615 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9616 # This option is not active
9617 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9618 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9619 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9620 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9621 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9622 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9623 # CYGHWR_DEVS_FLASH_MMC == 0
9624 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9625 # CYGHWR_DEVS_FLASH_MMC == 0
9629 # No user value, uncomment the following line to provide one.
9631 # The inferred value should not be edited directly.
9633 # value_source inferred
9637 # MXC platform NAND flash reset workaround support
9638 # When this option is enabled, it indicates 0xFFFF is used for
9639 # the NAND reset command instead of 0xFF.
9641 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9642 # No options implement this inferface
9643 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9644 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9647 # This value cannot be modified here.
9654 # Dynamic memory allocation
9655 # doc: ref/memalloc.html
9656 # This package provides memory allocator infrastructure required for
9657 # dynamic memory allocators, including the ISO standard malloc
9658 # interface. It also contains some sample implementations.
9660 cdl_package CYGPKG_MEMALLOC {
9661 # Packages cannot be added or removed, nor can their version be changed,
9662 # simply by editing their value. Instead the appropriate configuration
9663 # should be used to perform these actions.
9665 # This value cannot be modified here.
9667 # Current value: 1 current
9669 # The following properties are affected by this value
9670 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9671 # Requires: CYGPKG_MEMALLOC
9675 # Memory allocator implementations
9676 # This component contains configuration options related to the
9677 # various memory allocators available.
9679 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9680 # There is no associated value.
9684 # Fixed block allocator
9685 # This component contains configuration options related to the
9686 # fixed block memory allocator.
9688 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9689 # There is no associated value.
9694 # With this option enabled, this allocator will be
9695 # made thread-safe. Additionally allocation functions
9696 # are made available that allow a thread to wait
9697 # until memory is available.
9699 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9700 # This option is not active
9701 # ActiveIf constraint: CYGPKG_KERNEL
9702 # CYGPKG_KERNEL (unknown) == 0
9706 # No user value, uncomment the following line to provide one.
9708 # value_source default
9713 # Simple variable block allocator
9714 # This component contains configuration options related to the
9715 # simple variable block memory allocator. This allocator is not
9716 # very fast, and in particular does not scale well with large
9717 # numbers of allocations. It is however very compact in terms of
9718 # code size and does not have very much overhead per allocation.
9720 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9721 # There is no associated value.
9726 # With this option enabled, this allocator will be
9727 # made thread-safe. Additionally allocation functions
9728 # are added that allow a thread to wait until memory
9729 # are made available that allow a thread to wait
9730 # until memory is available.
9732 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9733 # This option is not active
9734 # ActiveIf constraint: CYGPKG_KERNEL
9735 # CYGPKG_KERNEL (unknown) == 0
9739 # No user value, uncomment the following line to provide one.
9741 # value_source default
9746 # The variable-block memory allocator can perform coalescing
9747 # of memory whenever the application code releases memory back
9748 # to the pool. This coalescing reduces the possibility of
9749 # memory fragmentation problems, but involves extra code and
9752 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9754 # No user value, uncomment the following line to provide one.
9756 # value_source default
9759 # The following properties are affected by this value
9760 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9761 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9766 # This component contains configuration options related to the
9767 # port of Doug Lea's memory allocator, normally known as
9768 # dlmalloc. dlmalloc has a reputation for being both fast
9769 # and space-conserving, as well as resisting fragmentation well.
9770 # It is a common choice for a general purpose allocator and
9771 # has been used in both newlib and Linux glibc.
9773 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9774 # There is no associated value.
9779 # Doug Lea's malloc implementation has substantial amounts
9780 # of internal checking in order to verify the operation
9781 # and consistency of the allocator. However this imposes
9782 # substantial overhead on each operation. Therefore this
9783 # checking may be individually disabled.
9785 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9787 # No user value, uncomment the following line to provide one.
9789 # value_source default
9790 # Default value: 0 != CYGDBG_USE_ASSERTS
9791 # CYGDBG_USE_ASSERTS == 0
9793 # Requires: CYGDBG_USE_ASSERTS
9794 # CYGDBG_USE_ASSERTS == 0
9799 # With this option enabled, this allocator will be
9800 # made thread-safe. Additionally allocation functions
9801 # are made available that allow a thread to wait
9802 # until memory is available.
9804 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9805 # This option is not active
9806 # ActiveIf constraint: CYGPKG_KERNEL
9807 # CYGPKG_KERNEL (unknown) == 0
9811 # No user value, uncomment the following line to provide one.
9813 # value_source default
9815 # Requires: CYGPKG_KERNEL
9816 # CYGPKG_KERNEL (unknown) == 0
9820 # Support more than one instance
9821 # Having this option disabled allows important
9822 # implementation structures to be declared as a single
9823 # static instance, allowing faster access. However this
9824 # would fail if there is more than one instance of
9825 # the dlmalloc allocator class. Therefore this option can
9826 # be enabled if multiple instances are required. Note: as
9827 # a special case, if this allocator is used as the
9828 # implementation of malloc, and it can be determined there
9829 # is more than one malloc pool, then this option will be
9832 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9834 # No user value, uncomment the following line to provide one.
9836 # value_source default
9840 # Use system memmove() and memset()
9841 # This may be used to control whether memset() and memmove()
9842 # are used within the implementation. The alternative is
9843 # to use some macro equivalents, which some people report
9844 # are faster in some circumstances.
9846 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9848 # No user value, uncomment the following line to provide one.
9850 # value_source default
9851 # Default value: 0 != CYGPKG_ISOINFRA
9852 # CYGPKG_ISOINFRA == current
9854 # Requires: CYGPKG_ISOINFRA
9855 # CYGPKG_ISOINFRA == current
9859 # Minimum alignment of allocated blocks
9860 # This option controls the minimum alignment that the
9861 # allocated memory blocks are aligned on, specified as
9862 # 2^N. Note that using large mininum alignments can lead
9863 # to excessive memory wastage.
9865 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9867 # No user value, uncomment the following line to provide one.
9869 # value_source default
9871 # Legal values: 3 to 10
9875 # Variable block allocator with separate metadata
9876 # This component contains configuration options related to the
9877 # variable block memory allocator with separate metadata.
9879 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9880 # There is no associated value.
9885 # With this option enabled, this allocator will be
9886 # made thread-safe. Additionally allocation functions
9887 # are made available that allow a thread to wait
9888 # until memory is available.
9890 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9891 # This option is not active
9892 # ActiveIf constraint: CYGPKG_KERNEL
9893 # CYGPKG_KERNEL (unknown) == 0
9897 # No user value, uncomment the following line to provide one.
9899 # value_source default
9905 # Kernel C API support for memory allocation
9906 # This option must be enabled to provide the extensions required
9907 # to support integration into the kernel C API.
9909 cdl_option CYGFUN_MEMALLOC_KAPI {
9910 # This option is not active
9911 # ActiveIf constraint: CYGPKG_KERNEL
9912 # CYGPKG_KERNEL (unknown) == 0
9916 # No user value, uncomment the following line to provide one.
9918 # value_source default
9919 # Default value: CYGFUN_KERNEL_API_C
9920 # CYGFUN_KERNEL_API_C (unknown) == 0
9924 # malloc(0) returns NULL
9925 # This option controls the behavior of malloc(0) ( or calloc with
9926 # either argument 0 ). It is permitted by the standard to return
9927 # either a NULL pointer or a unique pointer. Enabling this option
9928 # forces a NULL pointer to be returned.
9930 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9932 # No user value, uncomment the following line to provide one.
9934 # value_source default
9938 # Breakpoint site when running out of memory
9939 # Whenever the system runs out of memory, it invokes this function
9940 # before either going to sleep waiting for memory to become
9941 # available or returning failure.
9943 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
9945 # No user value, uncomment the following line to provide one.
9947 # value_source default
9951 # malloc() and supporting allocators
9952 # This component enables support for dynamic memory
9953 # allocation as supplied by the functions malloc(),
9954 # free(), calloc() and realloc(). As these
9955 # functions are often used, but can have quite an
9956 # overhead, disabling them here can ensure they
9957 # cannot even be used accidentally when static
9958 # allocation is preferred. Within this component are
9959 # various allocators that can be selected for use
9960 # as the underlying implementation of the dynamic
9961 # allocation functions.
9963 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
9964 # ActiveIf constraint: CYGPKG_ISOINFRA
9965 # CYGPKG_ISOINFRA == current
9969 # No user value, uncomment the following line to provide one.
9971 # value_source default
9976 # Use external heap definition
9977 # This option allows other components in the
9978 # system to override the default system
9979 # provision of heap memory pools. This should
9980 # be set to a header which provides the equivalent
9981 # definitions to <pkgconf/heaps.hxx>.
9983 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
9985 # No user value, uncomment the following line to provide one.
9987 # value_source default
9988 # Default value: 0 0
9991 # Use external implementation of joining multiple heaps
9992 # The default implementation of joining multiple heaps
9993 # is fine for the case where there are multiple disjoint
9994 # memory regions of the same type. However, in a system
9995 # there might be e.g. a small amount of internal SRAM and
9996 # a large amount of external DRAM. The SRAM is faster and
9997 # the DRAM is slower. An application can implement some
9998 # heuristic to choose which pool to allocate from. This
9999 # heuristic can be highly application specific.
10001 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
10003 # No user value, uncomment the following line to provide one.
10005 # value_source default
10006 # Default value: 0 0
10009 # malloc() allocator implementations
10011 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
10012 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
10013 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
10014 # This value cannot be modified here.
10017 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10018 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10021 # The following properties are affected by this value
10022 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10023 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10026 # malloc() implementation instantiation data
10027 # Memory allocator implementations that are capable of being
10028 # used underneath malloc() must be instantiated. The code
10029 # to do this is set in this option. It is only intended to
10030 # be set by the implementation, not the user.
10032 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10034 # No user value, uncomment the following line to provide one.
10035 # user_value <cyg/memalloc/dlmalloc.hxx>
10036 # value_source default
10037 # Default value: <cyg/memalloc/dlmalloc.hxx>
10039 # The following properties are affected by this value
10040 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10041 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10042 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10043 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10046 # Simple variable block implementation
10047 # This causes malloc() to use the simple
10048 # variable block allocator.
10050 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10052 # No user value, uncomment the following line to provide one.
10054 # value_source default
10056 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10057 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10059 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10060 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10064 # Doug Lea's malloc implementation
10065 # This causes malloc() to use a version of Doug Lea's
10066 # malloc (dlmalloc) as the underlying implementation.
10068 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10070 # No user value, uncomment the following line to provide one.
10072 # value_source default
10074 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10075 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10080 # Size of the fallback dynamic memory pool in bytes
10081 # If *no* heaps are configured in your memory layout,
10082 # dynamic memory allocation by
10083 # malloc() and calloc() must be from a fixed-size,
10084 # contiguous memory pool (note here that it is the
10085 # pool that is of a fixed size, but malloc() is still
10086 # able to allocate variable sized chunks of memory
10087 # from it). This option is the size
10088 # of that pool, in bytes. Note that not all of
10089 # this is available for programs to
10090 # use - some is needed for internal information
10091 # about memory regions, and some may be lost to
10092 # ensure that memory allocation only returns
10093 # memory aligned on word (or double word)
10094 # boundaries - a very common architecture
10097 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10099 # No user value, uncomment the following line to provide one.
10101 # value_source default
10102 # Default value: 16384
10103 # Legal values: 32 to 0x7fffffff
10106 # Common memory allocator package build options
10107 # Package specific build options including control over
10108 # compiler flags used only in building this package,
10109 # and details of which tests are built.
10111 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10112 # There is no associated value.
10116 # Additional compiler flags
10117 # This option modifies the set of compiler flags for
10118 # building this package. These flags are used in addition
10119 # to the set of global flags.
10121 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10123 # No user value, uncomment the following line to provide one.
10124 # user_value "-fno-rtti -Woverloaded-virtual"
10125 # value_source default
10126 # Default value: "-fno-rtti -Woverloaded-virtual"
10129 # Suppressed compiler flags
10130 # This option modifies the set of compiler flags for
10131 # building this package. These flags are removed from
10132 # the set of global flags if present.
10134 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10136 # No user value, uncomment the following line to provide one.
10137 # user_value -Wno-pointer-sign
10138 # value_source default
10139 # Default value: -Wno-pointer-sign
10143 # This option specifies the set of tests for this package.
10145 cdl_option CYGPKG_MEMALLOC_TESTS {
10146 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10148 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10153 # Common error code support
10154 # This package contains the common list of error and
10155 # status codes. It is held centrally to allow
10156 # packages to interchange error codes and status
10157 # codes in a common way, rather than each package
10158 # having its own conventions for error/status
10159 # reporting. The error codes are modelled on the
10160 # POSIX style naming e.g. EINVAL etc. This package
10161 # also provides the standard strerror() function to
10162 # convert error codes to textual representation, as
10163 # well as an implementation of the errno idiom.
10165 cdl_package CYGPKG_ERROR {
10166 # Packages cannot be added or removed, nor can their version be changed,
10167 # simply by editing their value. Instead the appropriate configuration
10168 # should be used to perform these actions.
10170 # This value cannot be modified here.
10172 # Current value: 1 current
10173 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10174 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10180 # This package controls the behaviour of the
10181 # errno variable (or more strictly, expression)
10184 cdl_component CYGPKG_ERROR_ERRNO {
10186 # No user value, uncomment the following line to provide one.
10188 # value_source default
10190 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10191 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10197 # This option controls whether the standard error
10198 # code reporting variable errno is a per-thread
10199 # variable, rather than global.
10201 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10203 # No user value, uncomment the following line to provide one.
10205 # The inferred value should not be edited directly.
10207 # value_source inferred
10209 # Requires: CYGVAR_KERNEL_THREADS_DATA
10210 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10215 # Trace verbosity level for debugging the errno
10216 # retrieval mechanism in errno.cxx. Increase this
10217 # value to get additional trace output.
10219 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10221 # No user value, uncomment the following line to provide one.
10223 # value_source default
10225 # Legal values: 0 to 1
10229 # strerror function
10230 # This package controls the presence and behaviour of the
10231 # strerror() function from <string.h>
10233 cdl_option CYGPKG_ERROR_STRERROR {
10235 # No user value, uncomment the following line to provide one.
10237 # value_source default
10239 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10240 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10244 # Error package build options
10245 # Package specific build options including control over
10246 # compiler flags used only in building this package,
10247 # and details of which tests are built.
10249 cdl_component CYGPKG_ERROR_OPTIONS {
10250 # There is no associated value.
10254 # Additional compiler flags
10255 # This option modifies the set of compiler flags for
10256 # building the error package. These flags are used in addition
10257 # to the set of global flags.
10259 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10261 # No user value, uncomment the following line to provide one.
10263 # value_source default
10264 # Default value: ""
10267 # Suppressed compiler flags
10268 # This option modifies the set of compiler flags for
10269 # building the error package. These flags are removed from
10270 # the set of global flags if present.
10272 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10274 # No user value, uncomment the following line to provide one.
10276 # value_source default
10277 # Default value: ""