drivers/qe/uec.c

   1 /*
   2  * Copyright (C) 2006-2011 Freescale Semiconductor, Inc.
   3  *
   4  * Dave Liu <daveliu@freescale.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #include "common.h"
  10 #include "net.h"
  11 #include "malloc.h"
  12 #include "asm/errno.h"
  13 #include "asm/io.h"
  14 #include "linux/immap_qe.h"
  15 #include "qe.h"
  16 #include "uccf.h"
  17 #include "uec.h"
  18 #include "uec_phy.h"
  19 #include "miiphy.h"
  20 #include <phy.h>
  21
  22 /* Default UTBIPAR SMI address */
  23 #ifndef CONFIG_UTBIPAR_INIT_TBIPA
  24 #define CONFIG_UTBIPAR_INIT_TBIPA 0x1F
  25 #endif
  26
  27 static uec_info_t uec_info[] = {
  28 #ifdef CONFIG_UEC_ETH1
  29         STD_UEC_INFO(1),        /* UEC1 */
  30 #endif
  31 #ifdef CONFIG_UEC_ETH2
  32         STD_UEC_INFO(2),        /* UEC2 */
  33 #endif
  34 #ifdef CONFIG_UEC_ETH3
  35         STD_UEC_INFO(3),        /* UEC3 */
  36 #endif
  37 #ifdef CONFIG_UEC_ETH4
  38         STD_UEC_INFO(4),        /* UEC4 */
  39 #endif
  40 #ifdef CONFIG_UEC_ETH5
  41         STD_UEC_INFO(5),        /* UEC5 */
  42 #endif
  43 #ifdef CONFIG_UEC_ETH6
  44         STD_UEC_INFO(6),        /* UEC6 */
  45 #endif
  46 #ifdef CONFIG_UEC_ETH7
  47         STD_UEC_INFO(7),        /* UEC7 */
  48 #endif
  49 #ifdef CONFIG_UEC_ETH8
  50         STD_UEC_INFO(8),        /* UEC8 */
  51 #endif
  52 };
  53
  54 #define MAXCONTROLLERS  (8)
  55
  56 static struct eth_device *devlist[MAXCONTROLLERS];
  57
  58 static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
  59 {
  60         uec_t           *uec_regs;
  61         u32             maccfg1;
  62
  63         if (!uec) {
  64                 printf("%s: uec not initial\n", __FUNCTION__);
  65                 return -EINVAL;
  66         }
  67         uec_regs = uec->uec_regs;
  68
  69         maccfg1 = in_be32(&uec_regs->maccfg1);
  70
  71         if (mode & COMM_DIR_TX) {
  72                 maccfg1 |= MACCFG1_ENABLE_TX;
  73                 out_be32(&uec_regs->maccfg1, maccfg1);
  74                 uec->mac_tx_enabled = 1;
  75         }
  76
  77         if (mode & COMM_DIR_RX) {
  78                 maccfg1 |= MACCFG1_ENABLE_RX;
  79                 out_be32(&uec_regs->maccfg1, maccfg1);
  80                 uec->mac_rx_enabled = 1;
  81         }
  82
  83         return 0;
  84 }
  85
  86 static int uec_mac_disable(uec_private_t *uec, comm_dir_e mode)
  87 {
  88         uec_t           *uec_regs;
  89         u32             maccfg1;
  90
  91         if (!uec) {
  92                 printf("%s: uec not initial\n", __FUNCTION__);
  93                 return -EINVAL;
  94         }
  95         uec_regs = uec->uec_regs;
  96
  97         maccfg1 = in_be32(&uec_regs->maccfg1);
  98
  99         if (mode & COMM_DIR_TX) {
 100                 maccfg1 &= ~MACCFG1_ENABLE_TX;
 101                 out_be32(&uec_regs->maccfg1, maccfg1);
 102                 uec->mac_tx_enabled = 0;
 103         }
 104
 105         if (mode & COMM_DIR_RX) {
 106                 maccfg1 &= ~MACCFG1_ENABLE_RX;
 107                 out_be32(&uec_regs->maccfg1, maccfg1);
 108                 uec->mac_rx_enabled = 0;
 109         }
 110
 111         return 0;
 112 }
 113
 114 static int uec_graceful_stop_tx(uec_private_t *uec)
 115 {
 116         ucc_fast_t              *uf_regs;
 117         u32                     cecr_subblock;
 118         u32                     ucce;
 119
 120         if (!uec || !uec->uccf) {
 121                 printf("%s: No handle passed.\n", __FUNCTION__);
 122                 return -EINVAL;
 123         }
 124
 125         uf_regs = uec->uccf->uf_regs;
 126
 127         /* Clear the grace stop event */
 128         out_be32(&uf_regs->ucce, UCCE_GRA);
 129
 130         /* Issue host command */
 131         cecr_subblock =
 132                  ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
 133         qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock,
 134                          (u8)QE_CR_PROTOCOL_ETHERNET, 0);
 135
 136         /* Wait for command to complete */
 137         do {
 138                 ucce = in_be32(&uf_regs->ucce);
 139         } while (! (ucce & UCCE_GRA));
 140
 141         uec->grace_stopped_tx = 1;
 142
 143         return 0;
 144 }
 145
 146 static int uec_graceful_stop_rx(uec_private_t *uec)
 147 {
 148         u32             cecr_subblock;
 149         u8              ack;
 150
 151         if (!uec) {
 152                 printf("%s: No handle passed.\n", __FUNCTION__);
 153                 return -EINVAL;
 154         }
 155
 156         if (!uec->p_rx_glbl_pram) {
 157                 printf("%s: No init rx global parameter\n", __FUNCTION__);
 158                 return -EINVAL;
 159         }
 160
 161         /* Clear acknowledge bit */
 162         ack = uec->p_rx_glbl_pram->rxgstpack;
 163         ack &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX;
 164         uec->p_rx_glbl_pram->rxgstpack = ack;
 165
 166         /* Keep issuing cmd and checking ack bit until it is asserted */
 167         do {
 168                 /* Issue host command */
 169                 cecr_subblock =
 170                  ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
 171                 qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock,
 172                                  (u8)QE_CR_PROTOCOL_ETHERNET, 0);
 173                 ack = uec->p_rx_glbl_pram->rxgstpack;
 174         } while (! (ack & GRACEFUL_STOP_ACKNOWLEDGE_RX ));
 175
 176         uec->grace_stopped_rx = 1;
 177
 178         return 0;
 179 }
 180
 181 static int uec_restart_tx(uec_private_t *uec)
 182 {
 183         u32             cecr_subblock;
 184
 185         if (!uec || !uec->uec_info) {
 186                 printf("%s: No handle passed.\n", __FUNCTION__);
 187                 return -EINVAL;
 188         }
 189
 190         cecr_subblock =
 191          ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
 192         qe_issue_cmd(QE_RESTART_TX, cecr_subblock,
 193                          (u8)QE_CR_PROTOCOL_ETHERNET, 0);
 194
 195         uec->grace_stopped_tx = 0;
 196
 197         return 0;
 198 }
 199
 200 static int uec_restart_rx(uec_private_t *uec)
 201 {
 202         u32             cecr_subblock;
 203
 204         if (!uec || !uec->uec_info) {
 205                 printf("%s: No handle passed.\n", __FUNCTION__);
 206                 return -EINVAL;
 207         }
 208
 209         cecr_subblock =
 210          ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
 211         qe_issue_cmd(QE_RESTART_RX, cecr_subblock,
 212                          (u8)QE_CR_PROTOCOL_ETHERNET, 0);
 213
 214         uec->grace_stopped_rx = 0;
 215
 216         return 0;
 217 }
 218
 219 static int uec_open(uec_private_t *uec, comm_dir_e mode)
 220 {
 221         ucc_fast_private_t      *uccf;
 222
 223         if (!uec || !uec->uccf) {
 224                 printf("%s: No handle passed.\n", __FUNCTION__);
 225                 return -EINVAL;
 226         }
 227         uccf = uec->uccf;
 228
 229         /* check if the UCC number is in range. */
 230         if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
 231                 printf("%s: ucc_num out of range.\n", __FUNCTION__);
 232                 return -EINVAL;
 233         }
 234
 235         /* Enable MAC */
 236         uec_mac_enable(uec, mode);
 237
 238         /* Enable UCC fast */
 239         ucc_fast_enable(uccf, mode);
 240
 241         /* RISC microcode start */
 242         if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx) {
 243                 uec_restart_tx(uec);
 244         }
 245         if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx) {
 246                 uec_restart_rx(uec);
 247         }
 248
 249         return 0;
 250 }
 251
 252 static int uec_stop(uec_private_t *uec, comm_dir_e mode)
 253 {
 254         if (!uec || !uec->uccf) {
 255                 printf("%s: No handle passed.\n", __FUNCTION__);
 256                 return -EINVAL;
 257         }
 258
 259         /* check if the UCC number is in range. */
 260         if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
 261                 printf("%s: ucc_num out of range.\n", __FUNCTION__);
 262                 return -EINVAL;
 263         }
 264         /* Stop any transmissions */
 265         if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx) {
 266                 uec_graceful_stop_tx(uec);
 267         }
 268         /* Stop any receptions */
 269         if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx) {
 270                 uec_graceful_stop_rx(uec);
 271         }
 272
 273         /* Disable the UCC fast */
 274         ucc_fast_disable(uec->uccf, mode);
 275
 276         /* Disable the MAC */
 277         uec_mac_disable(uec, mode);
 278
 279         return 0;
 280 }
 281
 282 static int uec_set_mac_duplex(uec_private_t *uec, int duplex)
 283 {
 284         uec_t           *uec_regs;
 285         u32             maccfg2;
 286
 287         if (!uec) {
 288                 printf("%s: uec not initial\n", __FUNCTION__);
 289                 return -EINVAL;
 290         }
 291         uec_regs = uec->uec_regs;
 292
 293         if (duplex == DUPLEX_HALF) {
 294                 maccfg2 = in_be32(&uec_regs->maccfg2);
 295                 maccfg2 &= ~MACCFG2_FDX;
 296                 out_be32(&uec_regs->maccfg2, maccfg2);
 297         }
 298
 299         if (duplex == DUPLEX_FULL) {
 300                 maccfg2 = in_be32(&uec_regs->maccfg2);
 301                 maccfg2 |= MACCFG2_FDX;
 302                 out_be32(&uec_regs->maccfg2, maccfg2);
 303         }
 304
 305         return 0;
 306 }
 307
 308 static int uec_set_mac_if_mode(uec_private_t *uec,
 309                 phy_interface_t if_mode, int speed)
 310 {
 311         phy_interface_t         enet_if_mode;
 312         uec_t                   *uec_regs;
 313         u32                     upsmr;
 314         u32                     maccfg2;
 315
 316         if (!uec) {
 317                 printf("%s: uec not initial\n", __FUNCTION__);
 318                 return -EINVAL;
 319         }
 320
 321         uec_regs = uec->uec_regs;
 322         enet_if_mode = if_mode;
 323
 324         maccfg2 = in_be32(&uec_regs->maccfg2);
 325         maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK;
 326
 327         upsmr = in_be32(&uec->uccf->uf_regs->upsmr);
 328         upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
 329
 330         switch (speed) {
 331                 case SPEED_10:
 332                         maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
 333                         switch (enet_if_mode) {
 334                                 case PHY_INTERFACE_MODE_MII:
 335                                         break;
 336                                 case PHY_INTERFACE_MODE_RGMII:
 337                                         upsmr |= (UPSMR_RPM | UPSMR_R10M);
 338                                         break;
 339                                 case PHY_INTERFACE_MODE_RMII:
 340                                         upsmr |= (UPSMR_R10M | UPSMR_RMM);
 341                                         break;
 342                                 default:
 343                                         return -EINVAL;
 344                                         break;
 345                         }
 346                         break;
 347                 case SPEED_100:
 348                         maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
 349                         switch (enet_if_mode) {
 350                                 case PHY_INTERFACE_MODE_MII:
 351                                         break;
 352                                 case PHY_INTERFACE_MODE_RGMII:
 353                                         upsmr |= UPSMR_RPM;
 354                                         break;
 355                                 case PHY_INTERFACE_MODE_RMII:
 356                                         upsmr |= UPSMR_RMM;
 357                                         break;
 358                                 default:
 359                                         return -EINVAL;
 360                                         break;
 361                         }
 362                         break;
 363                 case SPEED_1000:
 364                         maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
 365                         switch (enet_if_mode) {
 366                                 case PHY_INTERFACE_MODE_GMII:
 367                                         break;
 368                                 case PHY_INTERFACE_MODE_TBI:
 369                                         upsmr |= UPSMR_TBIM;
 370                                         break;
 371                                 case PHY_INTERFACE_MODE_RTBI:
 372                                         upsmr |= (UPSMR_RPM | UPSMR_TBIM);
 373                                         break;
 374                                 case PHY_INTERFACE_MODE_RGMII_RXID:
 375                                 case PHY_INTERFACE_MODE_RGMII_TXID:
 376                                 case PHY_INTERFACE_MODE_RGMII_ID:
 377                                 case PHY_INTERFACE_MODE_RGMII:
 378                                         upsmr |= UPSMR_RPM;
 379                                         break;
 380                                 case PHY_INTERFACE_MODE_SGMII:
 381                                         upsmr |= UPSMR_SGMM;
 382                                         break;
 383                                 default:
 384                                         return -EINVAL;
 385                                         break;
 386                         }
 387                         break;
 388                 default:
 389                         return -EINVAL;
 390                         break;
 391         }
 392
 393         out_be32(&uec_regs->maccfg2, maccfg2);
 394         out_be32(&uec->uccf->uf_regs->upsmr, upsmr);
 395
 396         return 0;
 397 }
 398
 399 static int init_mii_management_configuration(uec_mii_t *uec_mii_regs)
 400 {
 401         uint            timeout = 0x1000;
 402         u32             miimcfg = 0;
 403
 404         miimcfg = in_be32(&uec_mii_regs->miimcfg);
 405         miimcfg |= MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE;
 406         out_be32(&uec_mii_regs->miimcfg, miimcfg);
 407
 408         /* Wait until the bus is free */
 409         while ((in_be32(&uec_mii_regs->miimcfg) & MIIMIND_BUSY) && timeout--);
 410         if (timeout <= 0) {
 411                 printf("%s: The MII Bus is stuck!", __FUNCTION__);
 412                 return -ETIMEDOUT;
 413         }
 414
 415         return 0;
 416 }
 417
 418 static int init_phy(struct eth_device *dev)
 419 {
 420         uec_private_t           *uec;
 421         uec_mii_t               *umii_regs;
 422         struct uec_mii_info     *mii_info;
 423         struct phy_info         *curphy;
 424         int                     err;
 425
 426         uec = (uec_private_t *)dev->priv;
 427         umii_regs = uec->uec_mii_regs;
 428
 429         uec->oldlink = 0;
 430         uec->oldspeed = 0;
 431         uec->oldduplex = -1;
 432
 433         mii_info = malloc(sizeof(*mii_info));
 434         if (!mii_info) {
 435                 printf("%s: Could not allocate mii_info", dev->name);
 436                 return -ENOMEM;
 437         }
 438         memset(mii_info, 0, sizeof(*mii_info));
 439
 440         if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
 441                 mii_info->speed = SPEED_1000;
 442         } else {
 443                 mii_info->speed = SPEED_100;
 444         }
 445
 446         mii_info->duplex = DUPLEX_FULL;
 447         mii_info->pause = 0;
 448         mii_info->link = 1;
 449
 450         mii_info->advertising = (ADVERTISED_10baseT_Half |
 451                                 ADVERTISED_10baseT_Full |
 452                                 ADVERTISED_100baseT_Half |
 453                                 ADVERTISED_100baseT_Full |
 454                                 ADVERTISED_1000baseT_Full);
 455         mii_info->autoneg = 1;
 456         mii_info->mii_id = uec->uec_info->phy_address;
 457         mii_info->dev = dev;
 458
 459         mii_info->mdio_read = &uec_read_phy_reg;
 460         mii_info->mdio_write = &uec_write_phy_reg;
 461
 462         uec->mii_info = mii_info;
 463
 464         qe_set_mii_clk_src(uec->uec_info->uf_info.ucc_num);
 465
 466         if (init_mii_management_configuration(umii_regs)) {
 467                 printf("%s: The MII Bus is stuck!", dev->name);
 468                 err = -1;
 469                 goto bus_fail;
 470         }
 471
 472         /* get info for this PHY */
 473         curphy = uec_get_phy_info(uec->mii_info);
 474         if (!curphy) {
 475                 printf("%s: No PHY found", dev->name);
 476                 err = -1;
 477                 goto no_phy;
 478         }
 479
 480         mii_info->phyinfo = curphy;
 481
 482         /* Run the commands which initialize the PHY */
 483         if (curphy->init) {
 484                 err = curphy->init(uec->mii_info);
 485                 if (err)
 486                         goto phy_init_fail;
 487         }
 488
 489         return 0;
 490
 491 phy_init_fail:
 492 no_phy:
 493 bus_fail:
 494         free(mii_info);
 495         return err;
 496 }
 497
 498 static void adjust_link(struct eth_device *dev)
 499 {
 500         uec_private_t           *uec = (uec_private_t *)dev->priv;
 501         struct uec_mii_info     *mii_info = uec->mii_info;
 502
 503         extern void change_phy_interface_mode(struct eth_device *dev,
 504                                  phy_interface_t mode, int speed);
 505
 506         if (mii_info->link) {
 507                 /* Now we make sure that we can be in full duplex mode.
 508                 * If not, we operate in half-duplex mode. */
 509                 if (mii_info->duplex != uec->oldduplex) {
 510                         if (!(mii_info->duplex)) {
 511                                 uec_set_mac_duplex(uec, DUPLEX_HALF);
 512                                 printf("%s: Half Duplex\n", dev->name);
 513                         } else {
 514                                 uec_set_mac_duplex(uec, DUPLEX_FULL);
 515                                 printf("%s: Full Duplex\n", dev->name);
 516                         }
 517                         uec->oldduplex = mii_info->duplex;
 518                 }
 519
 520                 if (mii_info->speed != uec->oldspeed) {
 521                         phy_interface_t mode =
 522                                 uec->uec_info->enet_interface_type;
 523                         if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
 524                                 switch (mii_info->speed) {
 525                                 case SPEED_1000:
 526                                         break;
 527                                 case SPEED_100:
 528                                         printf ("switching to rgmii 100\n");
 529                                         mode = PHY_INTERFACE_MODE_RGMII;
 530                                         break;
 531                                 case SPEED_10:
 532                                         printf ("switching to rgmii 10\n");
 533                                         mode = PHY_INTERFACE_MODE_RGMII;
 534                                         break;
 535                                 default:
 536                                         printf("%s: Ack,Speed(%d)is illegal\n",
 537                                                 dev->name, mii_info->speed);
 538                                         break;
 539                                 }
 540                         }
 541
 542                         /* change phy */
 543                         change_phy_interface_mode(dev, mode, mii_info->speed);
 544                         /* change the MAC interface mode */
 545                         uec_set_mac_if_mode(uec, mode, mii_info->speed);
 546
 547                         printf("%s: Speed %dBT\n", dev->name, mii_info->speed);
 548                         uec->oldspeed = mii_info->speed;
 549                 }
 550
 551                 if (!uec->oldlink) {
 552                         printf("%s: Link is up\n", dev->name);
 553                         uec->oldlink = 1;
 554                 }
 555
 556         } else { /* if (mii_info->link) */
 557                 if (uec->oldlink) {
 558                         printf("%s: Link is down\n", dev->name);
 559                         uec->oldlink = 0;
 560                         uec->oldspeed = 0;
 561                         uec->oldduplex = -1;
 562                 }
 563         }
 564 }
 565
 566 static void phy_change(struct eth_device *dev)
 567 {
 568         uec_private_t   *uec = (uec_private_t *)dev->priv;
 569
 570 #if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 571         ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 572
 573         /* QE9 and QE12 need to be set for enabling QE MII managment signals */
 574         setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9);
 575         setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
 576 #endif
 577
 578         /* Update the link, speed, duplex */
 579         uec->mii_info->phyinfo->read_status(uec->mii_info);
 580
 581 #if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
 582         /*
 583          * QE12 is muxed with LBCTL, it needs to be released for enabling
 584          * LBCTL signal for LBC usage.
 585          */
 586         clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
 587 #endif
 588
 589         /* Adjust the interface according to speed */
 590         adjust_link(dev);
 591 }
 592
 593 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
 594
 595 /*
 596  * Find a device index from the devlist by name
 597  *
 598  * Returns:
 599  *  The index where the device is located, -1 on error
 600  */
 601 static int uec_miiphy_find_dev_by_name(const char *devname)
 602 {
 603         int i;
 604
 605         for (i = 0; i < MAXCONTROLLERS; i++) {
 606                 if (strncmp(devname, devlist[i]->name, strlen(devname)) == 0) {
 607                         break;
 608                 }
 609         }
 610
 611         /* If device cannot be found, returns -1 */
 612         if (i == MAXCONTROLLERS) {
 613                 debug ("%s: device %s not found in devlist\n", __FUNCTION__, devname);
 614                 i = -1;
 615         }
 616
 617         return i;
 618 }
 619
 620 /*
 621  * Read a MII PHY register.
 622  *
 623  * Returns:
 624  *  0 on success
 625  */
 626 static int uec_miiphy_read(const char *devname, unsigned char addr,
 627                             unsigned char reg, unsigned short *value)
 628 {
 629         int devindex = 0;
 630
 631         if (devname == NULL || value == NULL) {
 632                 debug("%s: NULL pointer given\n", __FUNCTION__);
 633         } else {
 634                 devindex = uec_miiphy_find_dev_by_name(devname);
 635                 if (devindex >= 0) {
 636                         *value = uec_read_phy_reg(devlist[devindex], addr, reg);
 637                 }
 638         }
 639         return 0;
 640 }
 641
 642 /*
 643  * Write a MII PHY register.
 644  *
 645  * Returns:
 646  *  0 on success
 647  */
 648 static int uec_miiphy_write(const char *devname, unsigned char addr,
 649                              unsigned char reg, unsigned short value)
 650 {
 651         int devindex = 0;
 652
 653         if (devname == NULL) {
 654                 debug("%s: NULL pointer given\n", __FUNCTION__);
 655         } else {
 656                 devindex = uec_miiphy_find_dev_by_name(devname);
 657                 if (devindex >= 0) {
 658                         uec_write_phy_reg(devlist[devindex], addr, reg, value);
 659                 }
 660         }
 661         return 0;
 662 }
 663 #endif
 664
 665 static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr)
 666 {
 667         uec_t           *uec_regs;
 668         u32             mac_addr1;
 669         u32             mac_addr2;
 670
 671         if (!uec) {
 672                 printf("%s: uec not initial\n", __FUNCTION__);
 673                 return -EINVAL;
 674         }
 675
 676         uec_regs = uec->uec_regs;
 677
 678         /* if a station address of 0x12345678ABCD, perform a write to
 679         MACSTNADDR1 of 0xCDAB7856,
 680         MACSTNADDR2 of 0x34120000 */
 681
 682         mac_addr1 = (mac_addr[5] << 24) | (mac_addr[4] << 16) | \
 683                         (mac_addr[3] << 8)  | (mac_addr[2]);
 684         out_be32(&uec_regs->macstnaddr1, mac_addr1);
 685
 686         mac_addr2 = ((mac_addr[1] << 24) | (mac_addr[0] << 16)) & 0xffff0000;
 687         out_be32(&uec_regs->macstnaddr2, mac_addr2);
 688
 689         return 0;
 690 }
 691
 692 static int uec_convert_threads_num(uec_num_of_threads_e threads_num,
 693                                          int *threads_num_ret)
 694 {
 695         int     num_threads_numerica;
 696
 697         switch (threads_num) {
 698                 case UEC_NUM_OF_THREADS_1:
 699                         num_threads_numerica = 1;
 700                         break;
 701                 case UEC_NUM_OF_THREADS_2:
 702                         num_threads_numerica = 2;
 703                         break;
 704                 case UEC_NUM_OF_THREADS_4:
 705                         num_threads_numerica = 4;
 706                         break;
 707                 case UEC_NUM_OF_THREADS_6:
 708                         num_threads_numerica = 6;
 709                         break;
 710                 case UEC_NUM_OF_THREADS_8:
 711                         num_threads_numerica = 8;
 712                         break;
 713                 default:
 714                         printf("%s: Bad number of threads value.",
 715                                  __FUNCTION__);
 716                         return -EINVAL;
 717         }
 718
 719         *threads_num_ret = num_threads_numerica;
 720
 721         return 0;
 722 }
 723
 724 static void uec_init_tx_parameter(uec_private_t *uec, int num_threads_tx)
 725 {
 726         uec_info_t      *uec_info;
 727         u32             end_bd;
 728         u8              bmrx = 0;
 729         int             i;
 730
 731         uec_info = uec->uec_info;
 732
 733         /* Alloc global Tx parameter RAM page */
 734         uec->tx_glbl_pram_offset = qe_muram_alloc(
 735                                 sizeof(uec_tx_global_pram_t),
 736                                  UEC_TX_GLOBAL_PRAM_ALIGNMENT);
 737         uec->p_tx_glbl_pram = (uec_tx_global_pram_t *)
 738                                 qe_muram_addr(uec->tx_glbl_pram_offset);
 739
 740         /* Zero the global Tx prameter RAM */
 741         memset(uec->p_tx_glbl_pram, 0, sizeof(uec_tx_global_pram_t));
 742
 743         /* Init global Tx parameter RAM */
 744
 745         /* TEMODER, RMON statistics disable, one Tx queue */
 746         out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE);
 747
 748         /* SQPTR */
 749         uec->send_q_mem_reg_offset = qe_muram_alloc(
 750                                 sizeof(uec_send_queue_qd_t),
 751                                  UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT);
 752         uec->p_send_q_mem_reg = (uec_send_queue_mem_region_t *)
 753                                 qe_muram_addr(uec->send_q_mem_reg_offset);
 754         out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset);
 755
 756         /* Setup the table with TxBDs ring */
 757         end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1)
 758                                          * SIZEOFBD;
 759         out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base,
 760                                  (u32)(uec->p_tx_bd_ring));
 761         out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address,
 762                                                  end_bd);
 763
 764         /* Scheduler Base Pointer, we have only one Tx queue, no need it */
 765         out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0);
 766
 767         /* TxRMON Base Pointer, TxRMON disable, we don't need it */
 768         out_be32(&uec->p_tx_glbl_pram->txrmonbaseptr, 0);
 769
 770         /* TSTATE, global snooping, big endian, the CSB bus selected */
 771         bmrx = BMR_INIT_VALUE;
 772         out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT));
 773
 774         /* IPH_Offset */
 775         for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++) {
 776                 out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0);
 777         }
 778
 779         /* VTAG table */
 780         for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++) {
 781                 out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0);
 782         }
 783
 784         /* TQPTR */
 785         uec->thread_dat_tx_offset = qe_muram_alloc(
 786                 num_threads_tx * sizeof(uec_thread_data_tx_t) +
 787                  32 *(num_threads_tx == 1), UEC_THREAD_DATA_ALIGNMENT);
 788
 789         uec->p_thread_data_tx = (uec_thread_data_tx_t *)
 790                                 qe_muram_addr(uec->thread_dat_tx_offset);
 791         out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset);
 792 }
 793
 794 static void uec_init_rx_parameter(uec_private_t *uec, int num_threads_rx)
 795 {
 796         u8      bmrx = 0;
 797         int     i;
 798         uec_82xx_address_filtering_pram_t       *p_af_pram;
 799
 800         /* Allocate global Rx parameter RAM page */
 801         uec->rx_glbl_pram_offset = qe_muram_alloc(
 802                 sizeof(uec_rx_global_pram_t), UEC_RX_GLOBAL_PRAM_ALIGNMENT);
 803         uec->p_rx_glbl_pram = (uec_rx_global_pram_t *)
 804                                 qe_muram_addr(uec->rx_glbl_pram_offset);
 805
 806         /* Zero Global Rx parameter RAM */
 807         memset(uec->p_rx_glbl_pram, 0, sizeof(uec_rx_global_pram_t));
 808
 809         /* Init global Rx parameter RAM */
 810         /* REMODER, Extended feature mode disable, VLAN disable,
 811          LossLess flow control disable, Receive firmware statisic disable,
 812          Extended address parsing mode disable, One Rx queues,
 813          Dynamic maximum/minimum frame length disable, IP checksum check
 814          disable, IP address alignment disable
 815         */
 816         out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE);
 817
 818         /* RQPTR */
 819         uec->thread_dat_rx_offset = qe_muram_alloc(
 820                         num_threads_rx * sizeof(uec_thread_data_rx_t),
 821                          UEC_THREAD_DATA_ALIGNMENT);
 822         uec->p_thread_data_rx = (uec_thread_data_rx_t *)
 823                                 qe_muram_addr(uec->thread_dat_rx_offset);
 824         out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset);
 825
 826         /* Type_or_Len */
 827         out_be16(&uec->p_rx_glbl_pram->typeorlen, 3072);
 828
 829         /* RxRMON base pointer, we don't need it */
 830         out_be32(&uec->p_rx_glbl_pram->rxrmonbaseptr, 0);
 831
 832         /* IntCoalescingPTR, we don't need it, no interrupt */
 833         out_be32(&uec->p_rx_glbl_pram->intcoalescingptr, 0);
 834
 835         /* RSTATE, global snooping, big endian, the CSB bus selected */
 836         bmrx = BMR_INIT_VALUE;
 837         out_8(&uec->p_rx_glbl_pram->rstate, bmrx);
 838
 839         /* MRBLR */
 840         out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN);
 841
 842         /* RBDQPTR */
 843         uec->rx_bd_qs_tbl_offset = qe_muram_alloc(
 844                                 sizeof(uec_rx_bd_queues_entry_t) + \
 845                                 sizeof(uec_rx_prefetched_bds_t),
 846                                  UEC_RX_BD_QUEUES_ALIGNMENT);
 847         uec->p_rx_bd_qs_tbl = (uec_rx_bd_queues_entry_t *)
 848                                 qe_muram_addr(uec->rx_bd_qs_tbl_offset);
 849
 850         /* Zero it */
 851         memset(uec->p_rx_bd_qs_tbl, 0, sizeof(uec_rx_bd_queues_entry_t) + \
 852                                         sizeof(uec_rx_prefetched_bds_t));
 853         out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset);
 854         out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr,
 855                  (u32)uec->p_rx_bd_ring);
 856
 857         /* MFLR */
 858         out_be16(&uec->p_rx_glbl_pram->mflr, MAX_FRAME_LEN);
 859         /* MINFLR */
 860         out_be16(&uec->p_rx_glbl_pram->minflr, MIN_FRAME_LEN);
 861         /* MAXD1 */
 862         out_be16(&uec->p_rx_glbl_pram->maxd1, MAX_DMA1_LEN);
 863         /* MAXD2 */
 864         out_be16(&uec->p_rx_glbl_pram->maxd2, MAX_DMA2_LEN);
 865         /* ECAM_PTR */
 866         out_be32(&uec->p_rx_glbl_pram->ecamptr, 0);
 867         /* L2QT */
 868         out_be32(&uec->p_rx_glbl_pram->l2qt, 0);
 869         /* L3QT */
 870         for (i = 0; i < 8; i++) {
 871                 out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0);
 872         }
 873
 874         /* VLAN_TYPE */
 875         out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100);
 876         /* TCI */
 877         out_be16(&uec->p_rx_glbl_pram->vlantci, 0);
 878
 879         /* Clear PQ2 style address filtering hash table */
 880         p_af_pram = (uec_82xx_address_filtering_pram_t *) \
 881                         uec->p_rx_glbl_pram->addressfiltering;
 882
 883         p_af_pram->iaddr_h = 0;
 884         p_af_pram->iaddr_l = 0;
 885         p_af_pram->gaddr_h = 0;
 886         p_af_pram->gaddr_l = 0;
 887 }
 888
 889 static int uec_issue_init_enet_rxtx_cmd(uec_private_t *uec,
 890                                          int thread_tx, int thread_rx)
 891 {
 892         uec_init_cmd_pram_t             *p_init_enet_param;
 893         u32                             init_enet_param_offset;
 894         uec_info_t                      *uec_info;
 895         int                             i;
 896         int                             snum;
 897         u32                             init_enet_offset;
 898         u32                             entry_val;
 899         u32                             command;
 900         u32                             cecr_subblock;
 901
 902         uec_info = uec->uec_info;
 903
 904         /* Allocate init enet command parameter */
 905         uec->init_enet_param_offset = qe_muram_alloc(
 906                                         sizeof(uec_init_cmd_pram_t), 4);
 907         init_enet_param_offset = uec->init_enet_param_offset;
 908         uec->p_init_enet_param = (uec_init_cmd_pram_t *)
 909                                 qe_muram_addr(uec->init_enet_param_offset);
 910
 911         /* Zero init enet command struct */
 912         memset((void *)uec->p_init_enet_param, 0, sizeof(uec_init_cmd_pram_t));
 913
 914         /* Init the command struct */
 915         p_init_enet_param = uec->p_init_enet_param;
 916         p_init_enet_param->resinit0 = ENET_INIT_PARAM_MAGIC_RES_INIT0;
 917         p_init_enet_param->resinit1 = ENET_INIT_PARAM_MAGIC_RES_INIT1;
 918         p_init_enet_param->resinit2 = ENET_INIT_PARAM_MAGIC_RES_INIT2;
 919         p_init_enet_param->resinit3 = ENET_INIT_PARAM_MAGIC_RES_INIT3;
 920         p_init_enet_param->resinit4 = ENET_INIT_PARAM_MAGIC_RES_INIT4;
 921         p_init_enet_param->largestexternallookupkeysize = 0;
 922
 923         p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_rx)
 924                                          << ENET_INIT_PARAM_RGF_SHIFT;
 925         p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_tx)
 926                                          << ENET_INIT_PARAM_TGF_SHIFT;
 927
 928         /* Init Rx global parameter pointer */
 929         p_init_enet_param->rgftgfrxglobal |= uec->rx_glbl_pram_offset |
 930                                                  (u32)uec_info->risc_rx;
 931
 932         /* Init Rx threads */
 933         for (i = 0; i < (thread_rx + 1); i++) {
 934                 if ((snum = qe_get_snum()) < 0) {
 935                         printf("%s can not get snum\n", __FUNCTION__);
 936                         return -ENOMEM;
 937                 }
 938
 939                 if (i==0) {
 940                         init_enet_offset = 0;
 941                 } else {
 942                         init_enet_offset = qe_muram_alloc(
 943                                         sizeof(uec_thread_rx_pram_t),
 944                                          UEC_THREAD_RX_PRAM_ALIGNMENT);
 945                 }
 946
 947                 entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
 948                                  init_enet_offset | (u32)uec_info->risc_rx;
 949                 p_init_enet_param->rxthread[i] = entry_val;
 950         }
 951
 952         /* Init Tx global parameter pointer */
 953         p_init_enet_param->txglobal = uec->tx_glbl_pram_offset |
 954                                          (u32)uec_info->risc_tx;
 955
 956         /* Init Tx threads */
 957         for (i = 0; i < thread_tx; i++) {
 958                 if ((snum = qe_get_snum()) < 0) {
 959                         printf("%s can not get snum\n", __FUNCTION__);
 960                         return -ENOMEM;
 961                 }
 962
 963                 init_enet_offset = qe_muram_alloc(sizeof(uec_thread_tx_pram_t),
 964                                                  UEC_THREAD_TX_PRAM_ALIGNMENT);
 965
 966                 entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
 967                                  init_enet_offset | (u32)uec_info->risc_tx;
 968                 p_init_enet_param->txthread[i] = entry_val;
 969         }
 970
 971         __asm__ __volatile__("sync");
 972
 973         /* Issue QE command */
 974         command = QE_INIT_TX_RX;
 975         cecr_subblock = ucc_fast_get_qe_cr_subblock(
 976                                 uec->uec_info->uf_info.ucc_num);
 977         qe_issue_cmd(command, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET,
 978                                                  init_enet_param_offset);
 979
 980         return 0;
 981 }
 982
 983 static int uec_startup(uec_private_t *uec)
 984 {
 985         uec_info_t                      *uec_info;
 986         ucc_fast_info_t                 *uf_info;
 987         ucc_fast_private_t              *uccf;
 988         ucc_fast_t                      *uf_regs;
 989         uec_t                           *uec_regs;
 990         int                             num_threads_tx;
 991         int                             num_threads_rx;
 992         u32                             utbipar;
 993         u32                             length;
 994         u32                             align;
 995         qe_bd_t                         *bd;
 996         u8                              *buf;
 997         int                             i;
 998
 999         if (!uec || !uec->uec_info) {
1000                 printf("%s: uec or uec_info not initial\n", __FUNCTION__);
1001                 return -EINVAL;
1002         }
1003
1004         uec_info = uec->uec_info;
1005         uf_info = &(uec_info->uf_info);
1006
1007         /* Check if Rx BD ring len is illegal */
1008         if ((uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN) || \
1009                 (uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT)) {
1010                 printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n",
1011                          __FUNCTION__);
1012                 return -EINVAL;
1013         }
1014
1015         /* Check if Tx BD ring len is illegal */
1016         if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) {
1017                 printf("%s: Tx BD ring length must not be smaller than 2.\n",
1018                          __FUNCTION__);
1019                 return -EINVAL;
1020         }
1021
1022         /* Check if MRBLR is illegal */
1023         if ((MAX_RXBUF_LEN == 0) || (MAX_RXBUF_LEN  % UEC_MRBLR_ALIGNMENT)) {
1024                 printf("%s: max rx buffer length must be mutliple of 128.\n",
1025                          __FUNCTION__);
1026                 return -EINVAL;
1027         }
1028
1029         /* Both Rx and Tx are stopped */
1030         uec->grace_stopped_rx = 1;
1031         uec->grace_stopped_tx = 1;
1032
1033         /* Init UCC fast */
1034         if (ucc_fast_init(uf_info, &uccf)) {
1035                 printf("%s: failed to init ucc fast\n", __FUNCTION__);
1036                 return -ENOMEM;
1037         }
1038
1039         /* Save uccf */
1040         uec->uccf = uccf;
1041
1042         /* Convert the Tx threads number */
1043         if (uec_convert_threads_num(uec_info->num_threads_tx,
1044                                          &num_threads_tx)) {
1045                 return -EINVAL;
1046         }
1047
1048         /* Convert the Rx threads number */
1049         if (uec_convert_threads_num(uec_info->num_threads_rx,
1050                                          &num_threads_rx)) {
1051                 return -EINVAL;
1052         }
1053
1054         uf_regs = uccf->uf_regs;
1055
1056         /* UEC register is following UCC fast registers */
1057         uec_regs = (uec_t *)(&uf_regs->ucc_eth);
1058
1059         /* Save the UEC register pointer to UEC private struct */
1060         uec->uec_regs = uec_regs;
1061
1062         /* Init UPSMR, enable hardware statistics (UCC) */
1063         out_be32(&uec->uccf->uf_regs->upsmr, UPSMR_INIT_VALUE);
1064
1065         /* Init MACCFG1, flow control disable, disable Tx and Rx */
1066         out_be32(&uec_regs->maccfg1, MACCFG1_INIT_VALUE);
1067
1068         /* Init MACCFG2, length check, MAC PAD and CRC enable */
1069         out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE);
1070
1071         /* Setup MAC interface mode */
1072         uec_set_mac_if_mode(uec, uec_info->enet_interface_type, uec_info->speed);
1073
1074         /* Setup MII management base */
1075 #ifndef CONFIG_eTSEC_MDIO_BUS
1076         uec->uec_mii_regs = (uec_mii_t *)(&uec_regs->miimcfg);
1077 #else
1078         uec->uec_mii_regs = (uec_mii_t *) CONFIG_MIIM_ADDRESS;
1079 #endif
1080
1081         /* Setup MII master clock source */
1082         qe_set_mii_clk_src(uec_info->uf_info.ucc_num);
1083
1084         /* Setup UTBIPAR */
1085         utbipar = in_be32(&uec_regs->utbipar);
1086         utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK;
1087
1088         /* Initialize UTBIPAR address to CONFIG_UTBIPAR_INIT_TBIPA for ALL UEC.
1089          * This frees up the remaining SMI addresses for use.
1090          */
1091         utbipar |= CONFIG_UTBIPAR_INIT_TBIPA << UTBIPAR_PHY_ADDRESS_SHIFT;
1092         out_be32(&uec_regs->utbipar, utbipar);
1093
1094         /* Configure the TBI for SGMII operation */
1095         if ((uec->uec_info->enet_interface_type == PHY_INTERFACE_MODE_SGMII) &&
1096            (uec->uec_info->speed == SPEED_1000)) {
1097                 uec_write_phy_reg(uec->dev, uec_regs->utbipar,
1098                         ENET_TBI_MII_ANA, TBIANA_SETTINGS);
1099
1100                 uec_write_phy_reg(uec->dev, uec_regs->utbipar,
1101                         ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
1102
1103                 uec_write_phy_reg(uec->dev, uec_regs->utbipar,
1104                         ENET_TBI_MII_CR, TBICR_SETTINGS);
1105         }
1106
1107         /* Allocate Tx BDs */
1108         length = ((uec_info->tx_bd_ring_len * SIZEOFBD) /
1109                  UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) *
1110                  UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
1111         if ((uec_info->tx_bd_ring_len * SIZEOFBD) %
1112                  UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) {
1113                 length += UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
1114         }
1115
1116         align = UEC_TX_BD_RING_ALIGNMENT;
1117         uec->tx_bd_ring_offset = (u32)malloc((u32)(length + align));
1118         if (uec->tx_bd_ring_offset != 0) {
1119                 uec->p_tx_bd_ring = (u8 *)((uec->tx_bd_ring_offset + align)
1120                                                  & ~(align - 1));
1121         }
1122
1123         /* Zero all of Tx BDs */
1124         memset((void *)(uec->tx_bd_ring_offset), 0, length + align);
1125
1126         /* Allocate Rx BDs */
1127         length = uec_info->rx_bd_ring_len * SIZEOFBD;
1128         align = UEC_RX_BD_RING_ALIGNMENT;
1129         uec->rx_bd_ring_offset = (u32)(malloc((u32)(length + align)));
1130         if (uec->rx_bd_ring_offset != 0) {
1131                 uec->p_rx_bd_ring = (u8 *)((uec->rx_bd_ring_offset + align)
1132                                                          & ~(align - 1));
1133         }
1134
1135         /* Zero all of Rx BDs */
1136         memset((void *)(uec->rx_bd_ring_offset), 0, length + align);
1137
1138         /* Allocate Rx buffer */
1139         length = uec_info->rx_bd_ring_len * MAX_RXBUF_LEN;
1140         align = UEC_RX_DATA_BUF_ALIGNMENT;
1141         uec->rx_buf_offset = (u32)malloc(length + align);
1142         if (uec->rx_buf_offset != 0) {
1143                 uec->p_rx_buf = (u8 *)((uec->rx_buf_offset + align)
1144                                                  & ~(align - 1));
1145         }
1146
1147         /* Zero all of the Rx buffer */
1148         memset((void *)(uec->rx_buf_offset), 0, length + align);
1149
1150         /* Init TxBD ring */
1151         bd = (qe_bd_t *)uec->p_tx_bd_ring;
1152         uec->txBd = bd;
1153
1154         for (i = 0; i < uec_info->tx_bd_ring_len; i++) {
1155                 BD_DATA_CLEAR(bd);
1156                 BD_STATUS_SET(bd, 0);
1157                 BD_LENGTH_SET(bd, 0);
1158                 bd ++;
1159         }
1160         BD_STATUS_SET((--bd), TxBD_WRAP);
1161
1162         /* Init RxBD ring */
1163         bd = (qe_bd_t *)uec->p_rx_bd_ring;
1164         uec->rxBd = bd;
1165         buf = uec->p_rx_buf;
1166         for (i = 0; i < uec_info->rx_bd_ring_len; i++) {
1167                 BD_DATA_SET(bd, buf);
1168                 BD_LENGTH_SET(bd, 0);
1169                 BD_STATUS_SET(bd, RxBD_EMPTY);
1170                 buf += MAX_RXBUF_LEN;
1171                 bd ++;
1172         }
1173         BD_STATUS_SET((--bd), RxBD_WRAP | RxBD_EMPTY);
1174
1175         /* Init global Tx parameter RAM */
1176         uec_init_tx_parameter(uec, num_threads_tx);
1177
1178         /* Init global Rx parameter RAM */
1179         uec_init_rx_parameter(uec, num_threads_rx);
1180
1181         /* Init ethernet Tx and Rx parameter command */
1182         if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx,
1183                                          num_threads_rx)) {
1184                 printf("%s issue init enet cmd failed\n", __FUNCTION__);
1185                 return -ENOMEM;
1186         }
1187
1188         return 0;
1189 }
1190
1191 static int uec_init(struct eth_device* dev, bd_t *bd)
1192 {
1193         uec_private_t           *uec;
1194         int                     err, i;
1195         struct phy_info         *curphy;
1196 #if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
1197         ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
1198 #endif
1199
1200         uec = (uec_private_t *)dev->priv;
1201
1202         if (uec->the_first_run == 0) {
1203 #if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
1204         /* QE9 and QE12 need to be set for enabling QE MII managment signals */
1205         setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9);
1206         setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
1207 #endif
1208
1209                 err = init_phy(dev);
1210                 if (err) {
1211                         printf("%s: Cannot initialize PHY, aborting.\n",
1212                                dev->name);
1213                         return err;
1214                 }
1215
1216                 curphy = uec->mii_info->phyinfo;
1217
1218                 if (curphy->config_aneg) {
1219                         err = curphy->config_aneg(uec->mii_info);
1220                         if (err) {
1221                                 printf("%s: Can't negotiate PHY\n", dev->name);
1222                                 return err;
1223                         }
1224                 }
1225
1226                 /* Give PHYs up to 5 sec to report a link */
1227                 i = 50;
1228                 do {
1229                         err = curphy->read_status(uec->mii_info);
1230                         if (!(((i-- > 0) && !uec->mii_info->link) || err))
1231                                 break;
1232                         udelay(100000);
1233                 } while (1);
1234
1235 #if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
1236                 /* QE12 needs to be released for enabling LBCTL signal*/
1237                 clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
1238 #endif
1239
1240                 if (err || i <= 0)
1241                         printf("warning: %s: timeout on PHY link\n", dev->name);
1242
1243                 adjust_link(dev);
1244                 uec->the_first_run = 1;
1245         }
1246
1247         /* Set up the MAC address */
1248         if (dev->enetaddr[0] & 0x01) {
1249                 printf("%s: MacAddress is multcast address\n",
1250                          __FUNCTION__);
1251                 return -1;
1252         }
1253         uec_set_mac_address(uec, dev->enetaddr);
1254
1255
1256         err = uec_open(uec, COMM_DIR_RX_AND_TX);
1257         if (err) {
1258                 printf("%s: cannot enable UEC device\n", dev->name);
1259                 return -1;
1260         }
1261
1262         phy_change(dev);
1263
1264         return (uec->mii_info->link ? 0 : -1);
1265 }
1266
1267 static void uec_halt(struct eth_device* dev)
1268 {
1269         uec_private_t   *uec = (uec_private_t *)dev->priv;
1270         uec_stop(uec, COMM_DIR_RX_AND_TX);
1271 }
1272
1273 static int uec_send(struct eth_device *dev, void *buf, int len)
1274 {
1275         uec_private_t           *uec;
1276         ucc_fast_private_t      *uccf;
1277         volatile qe_bd_t        *bd;
1278         u16                     status;
1279         int                     i;
1280         int                     result = 0;
1281
1282         uec = (uec_private_t *)dev->priv;
1283         uccf = uec->uccf;
1284         bd = uec->txBd;
1285
1286         /* Find an empty TxBD */
1287         for (i = 0; bd->status & TxBD_READY; i++) {
1288                 if (i > 0x100000) {
1289                         printf("%s: tx buffer not ready\n", dev->name);
1290                         return result;
1291                 }
1292         }
1293
1294         /* Init TxBD */
1295         BD_DATA_SET(bd, buf);
1296         BD_LENGTH_SET(bd, len);
1297         status = bd->status;
1298         status &= BD_WRAP;
1299         status |= (TxBD_READY | TxBD_LAST);
1300         BD_STATUS_SET(bd, status);
1301
1302         /* Tell UCC to transmit the buffer */
1303         ucc_fast_transmit_on_demand(uccf);
1304
1305         /* Wait for buffer to be transmitted */
1306         for (i = 0; bd->status & TxBD_READY; i++) {
1307                 if (i > 0x100000) {
1308                         printf("%s: tx error\n", dev->name);
1309                         return result;
1310                 }
1311         }
1312
1313         /* Ok, the buffer be transimitted */
1314         BD_ADVANCE(bd, status, uec->p_tx_bd_ring);
1315         uec->txBd = bd;
1316         result = 1;
1317
1318         return result;
1319 }
1320
1321 static int uec_recv(struct eth_device* dev)
1322 {
1323         uec_private_t           *uec = dev->priv;
1324         volatile qe_bd_t        *bd;
1325         u16                     status;
1326         u16                     len;
1327         u8                      *data;
1328
1329         bd = uec->rxBd;
1330         status = bd->status;
1331
1332         while (!(status & RxBD_EMPTY)) {
1333                 if (!(status & RxBD_ERROR)) {
1334                         data = BD_DATA(bd);
1335                         len = BD_LENGTH(bd);
1336                         NetReceive(data, len);
1337                 } else {
1338                         printf("%s: Rx error\n", dev->name);
1339                 }
1340                 status &= BD_CLEAN;
1341                 BD_LENGTH_SET(bd, 0);
1342                 BD_STATUS_SET(bd, status | RxBD_EMPTY);
1343                 BD_ADVANCE(bd, status, uec->p_rx_bd_ring);
1344                 status = bd->status;
1345         }
1346         uec->rxBd = bd;
1347
1348         return 1;
1349 }
1350
1351 int uec_initialize(bd_t *bis, uec_info_t *uec_info)
1352 {
1353         struct eth_device       *dev;
1354         int                     i;
1355         uec_private_t           *uec;
1356         int                     err;
1357
1358         dev = (struct eth_device *)malloc(sizeof(struct eth_device));
1359         if (!dev)
1360                 return 0;
1361         memset(dev, 0, sizeof(struct eth_device));
1362
1363         /* Allocate the UEC private struct */
1364         uec = (uec_private_t *)malloc(sizeof(uec_private_t));
1365         if (!uec) {
1366                 return -ENOMEM;
1367         }
1368         memset(uec, 0, sizeof(uec_private_t));
1369
1370         /* Adjust uec_info */
1371 #if (MAX_QE_RISC == 4)
1372         uec_info->risc_tx = QE_RISC_ALLOCATION_FOUR_RISCS;
1373         uec_info->risc_rx = QE_RISC_ALLOCATION_FOUR_RISCS;
1374 #endif
1375
1376         devlist[uec_info->uf_info.ucc_num] = dev;
1377
1378         uec->uec_info = uec_info;
1379         uec->dev = dev;
1380
1381         sprintf(dev->name, "UEC%d", uec_info->uf_info.ucc_num);
1382         dev->iobase = 0;
1383         dev->priv = (void *)uec;
1384         dev->init = uec_init;
1385         dev->halt = uec_halt;
1386         dev->send = uec_send;
1387         dev->recv = uec_recv;
1388
1389         /* Clear the ethnet address */
1390         for (i = 0; i < 6; i++)
1391                 dev->enetaddr[i] = 0;
1392
1393         eth_register(dev);
1394
1395         err = uec_startup(uec);
1396         if (err) {
1397                 printf("%s: Cannot configure net device, aborting.",dev->name);
1398                 return err;
1399         }
1400
1401 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
1402         miiphy_register(dev->name, uec_miiphy_read, uec_miiphy_write);
1403 #endif
1404
1405         return 1;
1406 }
1407
1408 int uec_eth_init(bd_t *bis, uec_info_t *uecs, int num)
1409 {
1410         int i;
1411
1412         for (i = 0; i < num; i++)
1413                 uec_initialize(bis, &uecs[i]);
1414
1415         return 0;
1416 }
1417
1418 int uec_standard_init(bd_t *bis)
1419 {
1420         return uec_eth_init(bis, uec_info, ARRAY_SIZE(uec_info));
1421 }