+commit e881cb563e32f45832b7b6db77bdcd017adcbb41
+Author: Bruce Adler <bruce.adler@ccpu.com>
+Date: Fri Nov 2 13:15:42 2007 -0700
+
+ fix wording in README
+
+ Changed the wording to properly describe the shadowing
+ of the environment from ROM to RAM
+
+ Signed-off-by: Bruce Adler <bruce.adler@acm.org>
+
+commit ad845beef06245426c57b53dcdc01b7dc70e0d45
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Wed Oct 31 02:18:15 2007 +0900
+
+ blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ec22755799466c8a103664bb3a5e647bf9c238f4
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Thu Oct 25 16:08:14 2007 +0300
+
+ Trimmed some variables in ne2000.c
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Thu Oct 25 17:51:27 2007 +0800
+
+ Fix the issue of usb_kbd driver missing the scan code of key 'z'.
+
+ The scan code of the key 'z' is 0x1d, which should be handled.
+
+ The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
+ controller.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Thu Oct 25 17:30:04 2007 +0800
+
+ Fix USB support issue for MPC8641HPCN board.
+
+ The configuration file has already enabled USB, but it
+ missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
+ on MPC8641HPCN can not work because of the wrong USB
+ register endian.
+
+ And add the USB command to U-Boot commands list.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit 4e62041023dc3de9d98d977bb080235bc6d035e0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Oct 24 18:16:01 2007 +0200
+
+ Use config_cmd_default.h instead of config_cmd_all.h
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 56622f87857439b1c221e9deef11a9d5bb5d4308
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Oct 24 01:37:36 2007 +0200
+
+ TQM5200: Call usb_cpu_init() during board init
+
+ usb_cpu_init() configures GPS USB pins, clocks, etc. and
+ is required for proper operation of kernel USB subsystem.
+ This setup was previously done in the kernel by the fixup
+ code which is being removed, thus low level init must be
+ done by U-boot now.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Oct 23 16:25:50 2007 +0200
+
+ Fix typo in nfs.c
+
+ An obvious typo. Originally fixed in linkstation u-boot port.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Oct 23 14:35:05 2007 +0200
+
+ Fix a typo in cpu/mpc824x/interrupts.c
+
+ Since December 2003 the timer_interrupt_cpu() function in
+ cpu/mpc824x/interrupts.c contains what seems to be a superfluous
+ parameter. Remove it.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
+Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
+Date: Wed Oct 17 11:13:51 2007 +0200
+
+ add ft_cpu_setup(..) on mpc8260
+
+ Add ft_cpu_setup(..)-function to adapt it for use with libfdt
+ based on code from mpc5xxx
+
+ Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
+ --
+
+commit 6abd82e19ae93c0b4d104e50165e235915ec0875
+Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
+Date: Wed Oct 17 11:18:42 2007 +0200
+
+ changes for IDS8247 board support
+
+ To get the IDS8247 board working following are done:
+ - FCC2 is deactivated
+ - FCC1 is activated
+ - I2C is activated
+ - CFI driver is activated
+ - Adapted for use with LIBFDT
+
+ Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
+ --
+
+commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Oct 24 15:48:37 2007 +0200
+
+ ATSTK1002: Remove default ethernet addresses
+
+ Wolfgang is right: It's not a good idea to set up default initial
+ ethernet addresses for a board, even though they belong to the local
+ range.
+
+ This will change the failure mode from "IT manager screams at you for
+ using duplicate ethernet addresses" to a nice error message explaining
+ that the ethernet address hasn't been set properly.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit e5c794e491a57d829b6d8733e2ed8368a2269abf
+Author: Justin Flammia <jflammia@savantav.com>
+Date: Mon Oct 29 17:40:35 2007 -0400
+
+ DHCP Client Fix
+
+ This is a multi-part message in MIME format.
+
+ commit e6e505eae94ed721e123e177489291fc4544b7b8
+ Author: Justin Flammia <jflammia@savantav.com>
+ Date: Mon Oct 29 17:19:03 2007 -0400
+
+ Found a bug in the way the DHCP Request packet is built, where the IP address
+ that is offered by the server is bound to prematurely. This patch is a fix of
+ that bug where the IP address offered by the DHCP server is not used until
+ after the DHCP ACK from the server is received.
+
+ Signed-off-by: Justin Flammia <jflammia@savantav.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:16:22 2007 -0500
+
+ ColdFire 54455: Fix correct boot location for atmel and intel
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:14:00 2007 -0500
+
+ ColdFire: Fix build error when CONFIG_WATCHDOG is defined
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit c67e12e705b204cfe914e3e3e693d69a445dcabf
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:12:36 2007 -0500
+
+ ColdFire 5329: Assign correct SDRAM size and fix cache
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:10:23 2007 -0500
+
+ ColdFire 5253: Assign correct SDRAM size
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 2acefa72ee0026f862ab65597ca687428f63a973
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:09:17 2007 -0500
+
+ ColdFire 5282: Fix external flash boot and return dramsize
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Oct 25 17:20:01 2007 +0200
+
+ TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Oct 24 08:42:25 2007 +0200
+
+ TQM5200: fix spurious characters on second serial interface
+
+ With this patch PSC3 is configured as UART. This is done, because if
+ the pins of PSC3 are not configured at all (-> all pins are GPI),
+ due to crosstalk, spurious characters may be send over the RX232_2_TXD
+ signal line.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit be4a87f11e297a5cededbf7dd71c0248f3874acd
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Oct 24 08:41:27 2007 +0200
+
+ TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
+
+ Some commands for the STK52xx base board try to access the SM501 grafic
+ controller. But the TQM5200S has no grafic controller (only the TQM5200
+ and the TQM5200B have). This patch deactivates the commands accessing
+ the SM501 for the TQM5200S.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit b31f64343ead9482cd439b1adbe4c34026a641b1
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Oct 22 16:45:53 2007 +0200
+
+ TQM5200: fix spurious characters on second serial interface
+
+ With this patch PSC3 is configured as UART. This is done, because if
+ the pins of PSC3 are not configured at all (-> all pins are GPI),
+ due to crosstalk, spurious characters may be send over the RX232_2_TXD
+ signal line.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Oct 22 16:40:06 2007 +0200
+
+ TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
+
+ Some commands for the STK52xx base board try to access the SM501 grafic
+ controller. But the TQM5200S has no grafic controller (only the TQM5200
+ and the TQM5200B have). This patch deactivates the commands accessing
+ the SM501 for the TQM5200S.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Oct 21 09:14:28 2007 +0200
+
+ Mips: Fix string functions differ prototype declaration
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Oct 19 17:51:40 2007 -0500
+
+ fsl_pci_init enable COMMAND_MEMORY if inbound window
+
+ Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
+ to pciauto_setup_device has the side effect of not getting
+ COMMAND_MEMORY set.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit e9d0d527992566ebef9826962ff1745b2f082b92
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 10:55:24 2007 +0200
+
+ delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 08:10:15 2007 +0200
+
+ fix warning: no return statement in function returning non-void
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e78220f6e514206757acfe247297fc9a328a881f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 06:33:45 2007 +0200
+
+ xsengine: Fix no partition type specified, use DOS as default
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 00:24:59 2007 +0200
+
+ lubbock: Fix no partition type specified, use DOS as default
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Oct 23 16:50:03 2007 +0200
+
+ Coding style: keep lists sorted; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 58b74b05c621e2835ecf4e2d3243042cf4186777
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 00:09:05 2007 +0200
+
+ Fix missing drivers makefile entries ds1722.c mw_eeprom.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 96455bfebc9887837095c9051d216f53c61b5f10
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 00:07:39 2007 +0200
+
+ Fix warning differ in signedness in board/innokom/innokom.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Fri Oct 19 00:25:33 2007 +0200
+
+ fix pxa255_idp board
+
+ The pxa255_idp being an old unmaintained board showed several issues:
+ 1. CONFIG_INIT_CRITICAL was still defined.
+ 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
+ 3. Symbol flash_addr was undeclared.
+ 4. The boards lowlevel_init function was still called memsetup.
+ 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
+ 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
+ 'target CPU does not support interworking' warnings on recent compilers.
+ 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
+ indexes rather than the register definitions from the pxa-regs header
+ file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
+ avoid any ambiguities.
+ 8. There were several redefinition warnings concerning ICMR, OSMR3,
+ OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
+ 9. The board configuration file was rather outdated.
+ 10. The part header file defined the vendor, product and revision arrays
+ as unsigned chars instead of just chars in the block_dev_desc_t
+ structure.
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
+Author: Rune Torgersen <runet@innovsys.com>
+Date: Wed Oct 17 11:56:31 2007 -0500
+
+ Make MPC8266ADS command selection more robust
+
+ Fix MPC8266 command line definition so it won't break when new commands
+ are added to u-boot.
+ Signed-off-by Rune Torgersen <runet@innovsys.com>
+
+commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Oct 23 13:14:10 2007 +0200
+
+ Motion-PRO: Update configuration to accomodate next generation board.
+
+ New board has faster oscillator and a different Flash chip. This affects:
+ - CFG_MPC5XXX_CLKIN
+ - SDRAM timings
+ - Flash CS configuration (timings)
+ - Flash sector size, and thus MTD partition layout
+ - malloc() arena size (due to bigger Flash sectors)
+ - smaller memory test range (due to bigger malloc() arena)
+
+ This patch also enables more extensive memory testing via "mtest".
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit eff501904df2bf1724a750062628ba2c51dbb1f8
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Oct 23 11:36:07 2007 +0200
+
+ Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
+
+ Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
+ register must be written a value of 0x00000004 as the first step of the
+ SDRAM contorller configuration.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Oct 23 10:22:16 2007 +0100
+
+ Move PL01* serial drivers to drivers/serial and adjust Makefiles.
+
+commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Sun Oct 21 22:10:10 2007 +0900
+
+ [MIPS] Fix UNCACHED_SDRAM
+
+ PHYSADDR is for physical address, KSEG1ADDR is for uncached.
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 00101dd7a32d12f698150123e47e4b3420279f86
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 21:30:42 2007 +0900
+
+ [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit eb700636db017d310edaeb559b13d82588560674
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:37 2007 +0900
+
+ [MIPS] u-boot.lds: Define _gp in a standard manner
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:36 2007 +0900
+
+ [MIPS] Fix $gp usage
+
+ Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
+ As a general principle, we should use _gp for $gp.
+
+ Thanks to linker script's help we fortunately have _gp which equals to
+ _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
+ be able to access to GOT entires, global variables and procedure entry
+ points. The right thing to do is to use _gp.
+
+ This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
+ which holds the offset from _gp. When updating GOT entries, we use this
+ offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
+
+ This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
+ I made some change to leave over num_got_entries.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Cc: Vlad Lungu <vlad@comsys.ro>
+
+commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:36 2007 +0900
+
+ [MIPS] u-boot.lds: Fix __got_start and __got_end
+
+ Ensure that __got_start points to top of the `.got', and __got_end points
+ to bottom as well, so that we never fail to count num_got_entries.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:36 2007 +0900
+
+ [MIPS] u-boot.lds: Remove duplicated .sdata section
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 21 01:01:17 2007 +0200
+
+ Minor coding style cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Thu Oct 4 20:47:10 2007 +0300
+
+ Fix NE2000 driver:
+
+ Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
+ to do anything in eth_stop() if eth_init() was not called.
+ Simplified RX path in order to avoid timeouts on really really
+ fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
+ clever enough to cope with 1 packet per eth_rx().
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit df90968b48fb34fa9072fab150db2ac89678f537
+Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
+Date: Mon Sep 24 13:32:13 2007 -0400
+
+ Setting MSR[DE] in do_reset
+
+ Hello,
+ This patch ensures the soft reset of the board for the 85xx boards
+ by setting the MSR[DE] in the do_reset function.
+
+ Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
+
+commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
+Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
+Date: Mon Sep 24 13:36:01 2007 -0400
+
+ MSR overwrite fix
+
+ Hello,
+ This patch fixes the MSR overwrite in the start.S when moving out of
+ the last 4K page.
+
+ Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
+
+commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
+Author: Dan Wilson <dwilson@fulcrummicro.com>
+Date: Fri Oct 19 11:33:48 2007 -0500
+
+ tsec driver should clear RHALT on startup
+
+ This was causing problems for some people.
+
+ Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
+ Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 11 00:29:18 2007 -0500
+
+ Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
+
+ On the MPC85xx CDS we have two issues:
+
+ 1. The device tree fixup code did not check to see if the property we are
+ trying to update is actually found. Its possible that it would update
+ random memory starting at 0.
+
+ 2. Newer Linux kernel's have moved the location of the PCI nodes to be
+ sibilings of the soc node and not children. The explicit PATH to the PCI
+ node would not be found for these device trees. Add the ability to handle
+ both paths. In the future we shouldn't handle such fixups by explicit path.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a3063eec775719b7e91023bbec3f64b3118791df
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 11 00:18:48 2007 -0500
+
+ Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
+
+ On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
+ console. Make it so we match that config what we tell Linux as the early
+ STDOUT console.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e1ce3cb617bb06f91f82f98915391175addf3e82
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 2 11:12:27 2007 -0500
+
+ Remove magic numbers from cache related operations for mpc85xx
+
+ The mpc85xx start code uses some magic numbers that we actually
+ have #defines for in <config.h> so use those instead.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Oct 19 16:47:26 2007 +0200
+
+ Fix two typos.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 281df457c1aa50d2752165d0c5c3282d4027b974
+Author: Tony Li <tony.li@freescale.com>
+Date: Thu Oct 18 17:47:19 2007 +0800
+
+ mpc83xx: Add configure entry for MPC83xx ATM support
+
+ Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
+ Makfile and MAKEALL
+
+ Signed-off-by: Tony Li <tony.li@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d2646554f529a9577515eceb0ec5eceee18244ba
+Author: Tony Li <tony.li@freescale.com>
+Date: Thu Oct 18 17:44:38 2007 +0800
+
+ mpc83xx: pq-mds-pib.c typo error
+
+ Correct to val8 from val.
+
+ Signed-off-by: Tony Li <tony.li@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3e11ae80fec1ee12194940955431186abf6009c2
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 17 15:40:19 2007 +0200
+
+ ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
+Author: runet@innovsys.com <runet@innovsys.com>
+Date: Tue Oct 16 14:50:40 2007 -0500
+
+ Make MPC8266ADS board compile again.
+
+ Signed-off-by: Runet Torgersen <runet@innovsys.com>
+
+commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Aug 27 12:41:03 2007 -0500
+
+ 86xx: Allow for fewer DDR slots per memory controller.
+
+ As a direct correlation exists between DDR DIMM slots
+ and SPD EEPROM addresses used to configure them, use
+ the individually defined SPD_EEPROM_ADDRESS* values to
+ determine if a DDR DIMM slot should have its SPD
+ configuration read or not.
+
+ Effectively, this now allows for 1 or 2 DIMM slots
+ per memory controller.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4d4a945e189a2f384c66432316da2788a0ac1607
+Author: Rodolfo Giometti <giometti@enneenne.com>
+Date: Mon Oct 15 11:59:17 2007 +0200
+
+ PXA USB OHCI: "usb stop" implementation.
+
+ Some USB keys need to be switched off before loading the kernel
+ otherwise they can remain in an undefined status which prevents them
+ to be correctly recognized by the kernel.
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit e2e93442e558cf1500e92861f99713b2f045ea22
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 15 11:39:00 2007 +0200
+
+ ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
+
+ The I2C bootstrap values that can be setup via the "bootstrap" command,
+ were setup incorrect regarding the generation of the internal sync PCI
+ clock. The values for PLB clock == 133MHz were slighly incorrect and the
+ values for PLB clock == 166MHz were totally incorrect. This could
+ lead to a hangup upon booting while PCI configuration scan.
+
+ This patch fixes this issue and configures valid PCI divisor values
+ for the sync PCI clock, with respect to the provided external async
+ PCI frequency.
+
+ Here the values of the formula in the chapter 14.2 "PCI clocking"
+ from the 440EPx users manual:
+
+ AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
+
+ 33MHz async PCI frequency:
+ PLB = 133:
+ => 32 <= 44.3 <= 65 (div = 3)
+
+ PLB = 166:
+ => 32 <= 55.3 <= 65 (div = 3)
+
+ 66MHz async PCI frequency:
+ PLB = 133:
+ => 65 <= 66.5 <= 132 (div = 2)
+
+ PLB = 166:
+ => 65 <= 83 <= 132 (div = 2)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 15 11:29:33 2007 +0200
+
+ ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
+
+ The BCSR status bit for the 66MHz PCI operation was correctly
+ addressed (MSB/LSB problem). Now the correct currently setup
+ PCI frequency is displayed upon bootup.
+
+ This patch also fixes this problem on Rainier & Yellowstone, since these
+ boards use the same souce code as Sequoia & Yosemite do.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Sep 26 17:55:56 2007 +0200
+
+ TQM860M: adjust for doubled flash sector size.
+
+ Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
+ doubled sector size.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
+Author: Jens Gehrlein <jens.gehrlein@tqs.de>
+Date: Wed Sep 26 17:55:54 2007 +0200
+
+ TQM8xx: Fix CAN timing.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit d43e489baf02afae49077791fb22332d240d8656
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Thu Sep 27 14:54:36 2007 +0200
+
+ TQM866M: fix SDRAM refresh
+
+ At 133 MHz the current SDRAM refresh rate is too fast
+ (measured 4 * 1.17 us).
+ CFG_MAMR_PTA changes from 39 to 97. This result
+ in a refresh rate of 4 * 7.8 us at the default clock
+ 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
+ This is a compromise until a new method is found to
+ adjust the refresh rate.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 9ef57bbee1c67cc01da2026c242c4692db32be36
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Sep 26 17:55:55 2007 +0200
+
+ TQM866M: adjust for doubled flash sector size.
+
+ Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
+ doubled sector size.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Oct 14 16:12:29 2007 +0200
+
+ [FIX] XUPV2P change command handling
+ and remove code violation
+
+commit 636400198228d96983c06657b17f760f5989958e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 14 00:13:19 2007 +0200
+
+ Prepare for 1.3.0-rc3 release
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Sep 29 13:41:37 2007 +0200
+
+ Fix warning differ in signedness in cpu/pxa/mmc.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit fc19e36f741e8bc727c0a330170b3b5db90399ef
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Oct 13 23:51:14 2007 +0200
+
+ Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Oct 13 21:15:39 2007 +0200
+
+ Coding Style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e1893815b0999410d7a327589611c7b38e95299e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Oct 12 15:49:39 2007 +0200
+
+ GP3 SSA: enable RTC
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8002012041f1ff9f997a5727abe5015f70cd2e46
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Oct 9 13:58:24 2007 +0200
+
+ [ads5121] EEPROM support added.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Oct 6 18:55:35 2007 +0200
+
+ AVR32: Initialize bi_flash* in board_init_r
+
+ The ATSTK1000-specific flash driver intializes bi_flashstart,
+ bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
+ driver, don't.
+
+ Initialize these in board_init_r instead so that things will still be
+ set up correctly when we switch to the CFI driver.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Oct 5 10:40:54 2007 +0200
+
+ tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 92869195ef8210758d2176230c0a36897afd50ed
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Oct 5 09:46:06 2007 +0200
+
+ CM5200: Fix missing null-termination in hostname manipulation code
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Tue Oct 2 19:09:01 2007 +0200
+
+ Fix memtest breakage
+
+ CFG_MEMTEST_START uses weird magic involving gd, which fails to
+ compile. Use hardcoded values instead (we actually know how much RAM
+ we have on board.)
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 2 11:44:46 2007 +0200
+
+ ppc4xx: Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 2 11:44:19 2007 +0200
+
+ ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Mon Oct 1 09:51:50 2007 +0200
+
+ Program EPLD to force full duplex mode for PHY.
+
+ EPLD forces modes of PHY operation. By default full duplex is turned off.
+ This fix turns it on.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
+Author: Timo Ketola <timo.ketola@exertus.fi>
+Date: Mon Sep 24 14:50:32 2007 +0300
+
+ Bugfix: Use only one PTD for one endpoint
+
+ Original isp116x-hcd code prepared multiple PTDs for longer than 16
+ byte transfers for one endpoint. That is unnecessary because the
+ ISP116x is able to split long data from one PTD into multiple
+ transactions based on the buffer size of the endpoint. It also caused
+ serious problems if the endpoint NAKed some of the transactions. In
+ that case ISP116x wouldn't notice that the other PTDs were for the same
+ endpoint and would try the other PTDs possibly out of order. That would
+ break the whole transfer.
+
+ This patch makes isp116x_submit_job to use one PTD for one transfer.
+
+ Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 86ec86c04326c3913178a7679aa910de071da75d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Sep 27 23:27:47 2007 +0200
+
+ Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Sep 11 14:12:55 2007 +0200
+
+ ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Sep 26 16:35:54 2007 -0500
+
+ 85xx io out functions need sync after write.
+
+ This fixes the mc146818 rtc_read/write functions for 85xx.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Sep 25 15:48:05 2007 -0600
+
+ Fpga: fix incorrect test of CFG_FPGA_XILINX macro
+
+ CFG_FPGA_XILINX is a bit value used to test against the value in
+ CONFIG_FPGA. Testing for a value will always return TRUE. I don't
+ think that is the intention in this code.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:41:30 2007 +0200
+
+ [FIX] change command handling and removing code violation
+
+commit f240356507038e5ce55e8a24cb2607e9eae6d10c
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:36:06 2007 +0200
+
+ [FIX] change sets of commands
+ because changing of command handling brings
+ compilation problems
+
+commit cb1bc63b75a232571eb69aa2c8aa919321655845
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:30:42 2007 +0200
+
+ [FIX] Email reparation & Copyright
+ Both codes are written by myself without any
+ support from CTU
+
+commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:25:11 2007 +0200
+
+ [PATCH] Change macro name for UartLite
+ because PowerPC 405 can use UartLite as console
+
+commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:21:19 2007 +0200
+
+ [PATCH] Add support for design without interrupt controller
+ Polling timer
+
+commit 0731933ec8ec45d02ba89b52df673d526873cdde
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:19:48 2007 +0200
+
+ [FIX] resolve problem with cpu without barrel shifter
+
+commit db14d77995ce515b728b178b63f82babe60e3d56
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:18:46 2007 +0200
+
+ [FIX] repair email address
+
+commit 481d4328618804add1f818a6c96296121cd0528e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:17:42 2007 +0200
+
+ [FIX] repair MFSL commands
+
+commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:08:37 2007 +0200
+
+ synchronizition with mainline
+
+commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Sep 20 00:04:14 2007 +0200
+
+ v1.3.0-rc2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 135e19bc2773ebca487e9a8371f67e1ba202313a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 18 21:36:35 2007 +0200
+
+ Avoid compiler warning.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8a783a65851bc7421ab69f442261215e21b8891a
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Sep 18 12:24:57 2007 -0600
+
+ Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
+
+ /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
+ nulls in a string differently. For example, the following statement:
+ echo "this is a string\0" > afile
+ Will produce the following with /bin/bash:
+ "this is a string\0"
+ But with /bin/dash, will produce:
+ "this is a string
+
+ Bug fixed by moving the embedded null out of the makefile and into the
+ config header. Also renamed the macro to avoid usage colision with the same
+ macro used by other board ports.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 18 17:40:27 2007 +0200
+
+ MCC200: fix build warning
+
+ The MCC200 board config file includes version.h for some customer-
+ specific setting, which causes warnings with "make depend"; build
+ version.h before depend.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit bd86220f58b99d6896198c385fda132f0c980915
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 18 13:07:54 2007 +0100
+
+ Move coloured led API to status_led.h
+ Improve indentation in drivers/at45.c
+
+commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
+Author: Eirik Aanonsen <eaa@wprmedical.com>
+Date: Tue Sep 18 08:47:20 2007 +0200
+
+ Update atstk1002 bootargs.
+
+ Updates to atstk1002 U-Boot header file:
+ - Changed bootargs:
+ * Set the bootargs for at1002 to point to the SD-card partition instead
+ * ... of the boot flash.
+ * Removing the rootfstype since that argument are not needed.
+
+ Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
+Author: Eirik Aanonsen <eaa@wprmedical.com>
+Date: Wed Sep 12 13:32:37 2007 +0200
+
+ Add some comments to clocks in atstk1002.h
+
+ This patch applies some clarifying comments to how the different
+ clocks are setup according to atstk1002.h Some of the previous
+ comments where stating wrongful information.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 97213f32416ead885deafea86774e912ffd60ad0
+Author: David Saada <David.Saada@ecitele.com>
+Date: Mon Sep 17 17:04:47 2007 +0200
+
+ Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
+
+ Signed-off-by: David Saada <david.saada@ecitele.com>
+
+commit 30363e98fa470fbecea5e8bc0f1443352754f303
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 17 08:20:47 2007 +0200
+
+ Small whitespace cleanup of OneNAND patch
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Sep 10 17:15:14 2007 +0900
+
+ OneNAND support (take #2)
+
+ [PATCH 3/3] OneNAND support (take #2)
+
+ OneNAND support at U-Boot
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 17aa2800457df0c06b41516f46f126712c196219
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Sep 10 17:14:34 2007 +0900
+
+ OneNAND support (take #2)
+
+ [PATCH 2/3] OneNAND support (take #2)
+
+ OneNAND support at U-Boot
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Sep 10 17:13:49 2007 +0900
+
+ OneNAND support (take #2)
+
+ [PATCH 1/3] OneNAND support (take #2)
+
+ OneNAND support at U-Boot
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Sep 16 20:51:57 2007 +0200
+
+ [FIX] remove files form repository
+
+commit 67c31036acaaaa992fc346cc89db0909a7e733c4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Sep 16 17:10:04 2007 +0200
+
+ TQM8xx[LM]: Fix broken environment alignment.
+
+ With recent toolchains, the environment sectors were no longer aligned to
+ sector boundaries. The reason was a combination of two bugs:
+
+ 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
+ for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
+ this gets defined, is not included here (and cannot be included
+ without causing lots of problems).
+
+ Added a new #define CFG_USE_PPCENV for all boards which really
+ want to put the environment is a ".ppcenv" section.
+
+ 2) The linker scripts just include environment.o, silently assuming
+ that the objects in that file are really in the order in which
+ they are coded in the C file, i. e. "environment" first, then
+ "redundand_environment", and "env_size" last. However, current
+ toolchains (GCC-4.x) reorder the objects, causing the environment
+ data not to start on a flash sector boundary:
+
+ Instead of: we got:
+
+ 40008000 T environment 40008000 T env_size
+ 4000c000 T redundand_environment 40008004 T redundand_environment
+ 40010000 T env_size 4000c004 T environment
+
+ Note: this patch fixes just the first part, and cures the alignment
+ problem by making sure that "env_size" gets placed correctly. However,
+ we still have a potential issue because primary and redundant
+ environment sectors are actually swapped, i. e. we have now:
+
+ 40008000 T redundand_environment
+ 4000c000 T environment
+ 40010000 T env_size
+
+ This shall be fixed in the next version.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit eb6da8050797c204c9d010548424186c7ce32fc1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Sep 16 02:39:35 2007 +0200
+
+ TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cd2d1602c54cc6957bdef3872272a4b264893960
+Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
+Date: Mon Sep 10 14:54:56 2007 -0400
+
+ Typo fix in tsec.c
+
+ Fixup for the break statement in wrong place.
+
+ [Patch by urwithsughosh@gmail.com]
+ Acked-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 11 17:04:00 2007 +0200
+
+ Fix do_div() usage in nand process output
+
+ Fix usage of do_div() in nand erase|read|write process output.
+
+ The last patch to nand_util.c introduced do_div() instead of libgcc's
+ implementation. But do_div() returns the quotient in its first
+ macro parameter and not as result.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit c750d2e6692a000a82f29de7bf24e3dc21239161
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Sep 12 12:36:53 2007 +0200
+
+ NAND: Add CFG_NAND_QUIET option
+
+ This config option sets the default for the progress information
+ output behavior that can also be configured through the 'quiet'
+ environment variable.
+
+ The legacy NAND code does not print the current progress info
+ on the console. So this option is for backward compatibility for
+ units that are in the field and where setting the quiet variable
+ is not an option. With CFG_NAND_QUIET set to '1' the console
+ progress info is turned off. This can still be overwritten
+ through the environment variable.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit dcb88630290d2bcd803386dd4c2be73142994c4f
+Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
+Date: Thu Sep 13 16:06:05 2007 -0700
+
+ ColdFire: fix build error becasue of bad type of mii_init()
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
+Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
+Date: Thu Sep 13 16:04:05 2007 -0700
+
+ ColdFire: Fix build error caused by pixis.c
+
+ Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit e21659e30660a1377c42af135a6114efe39801d9
+Author: Sam Sparks <SSparks@twacs.com>
+Date: Fri Sep 14 11:14:42 2007 -0600
+
+ Update MPC8349ITX*_config to place config.tmp in right place.
+
+ MPC834ITX*_config does not store config.tmp at the correct locatation,
+ causing MPC8349ITXGP to have the wrong TEXT_BASE.
+
+ Signed-off-by: Sam Sparks <SSparks@twacs.com>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 1218abf1b5817a39a82399b4b928b00750575bda
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Sep 15 20:48:41 2007 +0200
+
+ Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 66b3f24d665be678a9dbb125b1e84185400f63b5
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Sep 15 11:55:42 2007 +0200
+
+ Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
+
+ As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
+ function local.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+ [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
+
+commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Sep 15 00:03:35 2007 +0200
+
+ Synchronize with U-BOOT mainline
+
+commit d7fee32b7e61fe11c64e371cde79faa4768e8350
+Author: Sam Sparks <SSparks@twacs.com>
+Date: Fri Sep 14 11:14:42 2007 -0600
+
+ Update MPC8349ITX*_config to place config.tmp in right place.
+
+ MPC834ITX*_config does not store config.tmp at the correct locatation,
+ causing MPC8349ITXGP to have the wrong TEXT_BASE.
+
+ Signed-off-by: Sam Sparks <SSparks@twacs.com>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Sep 13 18:21:48 2007 +0200
+
+ cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Sep 13 16:33:59 2007 +0200
+
+ tqm5200: Restore customary env. variable boot commands for powerpc kernels
+
+ - update default definitions of kernel_addr and fdt_addr env. variables
+ - make arch/powerpc booting the default scenario
+ - update MTD partition layout to match the above
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit f34024d4a328e6edd906456da98d2c537155c4f7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Sep 12 00:48:57 2007 +0200
+
+ Fix memory corruption problem on STX GP3 SSA Board.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 11 15:35:01 2007 +0100
+
+ Final tidy
+
+commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Sep 11 15:42:11 2007 +0200
+
+ [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
+ scan on second pci bus.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Sep 11 12:57:52 2007 +0200
+
+ [ppc4xx] Individual handling of sdram.c for bamboo_nand build
+
+ Bamboo has a file sdram.c which needs special treatment when building in
+ separate directory. It has to be linked to build directory otherwise it is
+ not seen.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit d45963854eff39d575124d859419bb4953ce2c87
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Sep 11 00:37:04 2007 +0200
+
+ [FIX] Microblaze ML401 - repare FLASH handling
+
+commit 38c1ef728d19950414a8ab1ccfc53767848fa346
+Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
+Date: Mon Sep 10 16:55:59 2007 +0100
+
+ Allocate CPU Architecture Code for STMicroelectronics' ST200.
+
+ Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
+ ---------------------------------------------------
+
+commit 754bac48156f8958d8f6a53a51eda88ab5758929
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 10 20:42:31 2007 +0200
+
+ Update version to match current state.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Mon Sep 10 17:39:08 2007 +0200
+
+ [MPC512x] Streamline frame handling in the FEC driver
+
+ - convert frame size settings to be derived from a single base
+ - set frame size to the recommended default value
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Sep 10 11:34:00 2007 +0900
+
+ Remove compiler warning: target CPU does not support interworking
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Sep 9 21:21:33 2007 +0200
+
+ Fix compile error in spc1920 config.
+
+ Signed-off-by: Markus Klotzbücher <mk@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Fri Sep 7 09:25:07 2007 -0600
+
+ Bugfix: make bootm+libfdt compile on boards with no flash
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Sep 7 18:35:37 2007 +0200
+
+ [PPC440SPe] PCIe environment settings for Katmai and Yucca
+
+ - 'pciconfighost' is set by default in order to be able to scan bridges
+ behind the primary host/PCIe
+
+ - 'pciscandelay' env variable is recognized to allow for user-controlled
+ delay before the PCIe bus enumeration; some peripheral devices require a
+ significant delay before they can be scanned (e.g. LSI8408E); without the
+ delay they are not detected
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 7f1913938984ef6c6a46cb53e003719196d9c5de
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Sep 7 18:20:23 2007 +0200
+
+ [PPC440SPe] Improve PCIe configuration space access
+
+ - correct configuration space mapping
+ - correct bus numbering
+ - better access to config space
+
+ Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
+ first device on the first bus. We now allow to configure up to 16 buses;
+ also, scanning for devices behind the PCIe-PCIe bridge is supported, so
+ peripheral devices farther in hierarchy can be identified.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Sep 7 17:46:18 2007 +0200
+
+ [PPC440SPe] Convert machine check exceptions handling
+
+ Convert using fixup mechanism to suppressing MCK for the duration of config
+ read/write transaction: while fixups work fine with the case of a precise
+ exception, we identified a major drawback with this approach when there's
+ an imprecise case. In this scenario there is the following race condition:
+ the fixup is (by design) set to catch the instruction following the one
+ actually causing the exception; if an interrupt (e.g. decrementer) happens
+ between those two instructions, the ISR code is executed before the fixup
+ handler the machine check is no longer protected by the fixup handler as it
+ appears as within the ISR code. In consequence the fixup approach is being
+ phased out and replaced with explicit suppressing of MCK during a PCIe
+ config read/write cycle.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit ff7640c9ead8806b5d827f2b29f9cb2632add729
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 7 17:43:36 2007 +0200
+
+ Fix typo in MAKEALL script.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Sep 7 17:09:21 2007 +0200
+
+ [MPC512x] Proper handling of larger frames in the FEC driver
+
+ When frame larger than local RX buffer is received, it is split and handled
+ by two buffer descriptors. Prior to this patch the FEC driver discarded
+ contents of a buffer descriptor without the 'LAST' bit set, so the first
+ part of the frame was lost in case of larger frames. This fix allows to
+ safely combine the two pieces into the whole frame.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Sep 7 17:05:36 2007 +0200
+
+ [MPC512x] Correct fixup relocation
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit a89cbbd27a60e6740772000fd0688ffba1c2576a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 7 01:21:25 2007 +0200
+
+ Update CHANGELOG, minor coding style cleanup.
+
+commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
+Author: stefano babic <sbabic@denx.de>
+Date: Thu Aug 30 23:01:49 2007 +0200
+
+ PXA270: Added support for TrizepsIV board.
+
+ This patch add support for the Trizeps IV module (520Mhz).
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
+Author: stefano babic <sbabic@denx.de>
+Date: Thu Aug 30 22:57:04 2007 +0200
+
+ PXA270: Add support for multiple serial ports.
+
+ This patch adds support for multiple serial ports to the PXA target.
+ FFUART, BTUART and STUART are supported.
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
+Author: stefano babic <sbabic@denx.de>
+Date: Thu Aug 30 22:48:47 2007 +0200
+
+ PXA270: fix compile issue (invalid lvalue)
+
+ Code is broken for PXA270 due to "invalid lvalue in assignment".
+
+ This patch fix it in pxa-regs.h
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Thu Aug 30 18:19:05 2007 +0800
+
+ Add BUILD_DIR support for bios emulator.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit b4d8a55145442f136982634862341a3e02002bda
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Fri Aug 31 14:41:51 2007 +0900
+
+ [MIPS] Remove inline asm string functions
+
+ Stop using inline string functions on MIPS as other ARCHs do so,
+ since the optimized inline asm versions are not small.
+
+ This change is triggered by a following MIPS build error:
+ common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
+ common/exports.c:32: undefined reference to `strcmp'
+ make: *** [u-boot] Error 1
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Fri Aug 31 14:41:45 2007 +0900
+
+ [MIPS] Update asm string header
+
+ This patches contains several bugfixes and cleanups in the latest upstream:
+
+ - Don't include linux/config.h
+ - Remove buggy inline version of memscan.
+ - Merge with Linux 2.6.11-rc3.
+ - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
+ - Goodbye mips64. 31704 lines of code bite the dust.
+ - Replace extern inline with static inline.
+ - Fix return value of strncpy.
+ - Remove a bunch more "$1" clobbers.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Sep 4 17:31:22 2007 +0200
+
+ Fix do_bootm_linux() so that multi-file images with FDT blob boot.
+
+ Fix incorrect blob address calculation in do_bootm_linux() that prevents
+ booting the kernel from a multi-file image (kernel + initrd + blob).
+
+ Also, make minor updates to the U-Boot's output and to the coding style.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 041a2554ad619e80dce520c1a33210affcb6a3f2
+Author: Gary Jennejohn <gary.jennejohn@freenet.de>
+Date: Fri Aug 31 14:29:04 2007 +0200
+
+ Add support for Sil680 IDE controller.
+
+ o add drivers/sil680.c to support the Sil680 IDE-controller.
+ o drivers/Makefile: add sil680.o.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit e79021223bc339df655e360645a52c457a74b067
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Sep 6 09:47:40 2007 -0600
+
+ bootm/fdt: Only process the fdt if an fdt address was provided
+
+ Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
+ kernels using the board info structure (instead of passing a device tree)
+ This change allows the old style booting to be used if the fdt argument
+ was not passed to 'bootm'.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Sep 6 09:46:23 2007 -0600
+
+ Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
+
+ Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
+
+ Tested on: lite5200b
+
+ Note: the fixup functions have not been moved to a common place. This
+ patch is targeted for immediate merging as in solves a build issue, but
+ the final name/location of the fixups is still subject to debate. I
+ propose to merge this now, and move the fixups in the next merge window
+ to be usable by all targets.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 41bb76e941929f54a73206fb132f7a4c275543a3
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Sep 6 09:46:17 2007 -0600
+
+ libfdt: add convenience function fdt_find_and_setprop()
+
+ Given the path to a node, fdt_find_and_setprop() allows a property value
+ to be set directly.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 80767a6cead9990d9e77e62be947843c2c72f469
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed Sep 5 16:04:41 2007 +0100
+
+ Changed API name to coloured_led.h
+ Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
+ Tidied other cpu/arm920t/start.S code
+
+commit 56a9270521baaa00e12639a978302a67f61ef060
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Aug 30 16:18:18 2007 -0500
+
+ Fix ULI RTC support on MPC8544 DS
+
+ The RTC on the M1575 ULI chipset requires a dummy read before
+ we are able to talk to the RTC. We accomplish this by adding a
+ second memory region to the PHB the ULI is on and read from it.
+
+ The second region is added to maintain compatiabilty with Linux's
+ view of the PCI memory map.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Aug 30 01:58:48 2007 -0500
+
+ ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
+
+ pcie is now differentiated from pci. Add 8641 bus-range updates.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 16:18:38 2007 +0100
+
+ Add coloured led interface for ARM boards.
+ Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
+
+commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 14:49:28 2007 +0100
+
+ Move include/led.h to board/at91rm9200dk
+
+commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 14:25:51 2007 +0100
+
+ Ran Lindent on drivers/at45.c
+
+commit 557ab89d294f08dd532f21d19861b40093200a33
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 14:23:50 2007 +0100
+
+ Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
+
+commit 81b73dec16fd1227369a191e725e10044a9d56b8
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Fri Aug 31 15:21:46 2007 +0200
+
+ ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
+
+ The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
+ set to non-zero, because it doesn't support MRM (memory-read-
+ multiple) correctly. We now added the possibility to configure
+ this register in the board config file, so that the default value
+ of 8 can be overridden.
+
+ Here the details of this patch:
+
+ o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
+ board-specific settings. As an example the sequoia board requires 0.
+ Idea from Stefan Roese <sr@denx.de>.
+ o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
+ PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
+ o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
+ CFG_PCI_CACHE_LINE_SIZE to 0.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 60174746c668b309378a91488dded898e9553eae
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Aug 31 10:01:51 2007 +0200
+
+ Fix TFTP OACK code for short packets.
+
+ The old code had a loop limit overflow bug which caused a semi-
+ infinite loop for small packets, because in "i<len-8", "i" was signed,
+ but "len" was unsigned, and "len-8" became a huge number for small
+ values of "len".
+
+ This is a workaround which replaces broken commit 8f1bc284.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
+Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+Date: Thu Aug 30 15:03:05 2007 +0200
+
+ Reduce BOOTDELAY variable to 1 second by default for STK1002
+
+ Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
+Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+Date: Thu Aug 30 15:03:04 2007 +0200
+
+ Remove double quotation marks around MAC address for STK1002
+
+ Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit ff13ac8c7bbebb238e339592de765c546dba1073
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 30 14:42:15 2007 +0200
+
+ Backout commit 8f1bc284 as it causes TFTP to fail.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Aug 30 02:26:17 2007 -0500
+
+ Revert "Fix MPC8544DS PCIe3 scsi."
+
+ This reverts commit 9468e680.
+ Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Wed Aug 29 18:26:24 2007 -0600
+
+ tftp: don't implicity trust the format of recevied packets
+
+ The TFTP OACK code trusts that the incoming packet is formated as
+ ASCII text and can be processed by string functions. It also has a
+ loop limit overflow bug where if the packet length is less than 8, it
+ ends up looping over *all* of memory to find the 'blksize' string.
+
+ This patch solves the problem by forcing the packet to be null
+ terminated and using strstr() to search for the sub string.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Aug 29 16:31:18 2007 +0200
+
+ ppc4xx: Change lwmon5 default environment to support Linux RTC
+
+ The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
+ to supply the RTC I2C address as bootline parameter. This patch
+ adds support for this rtc probing parameter to the bootargs:
+
+ "rtc-pcf8563.probe=0,0x51"
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 29 09:06:05 2007 -0500
+
+ sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
+
+ this had slipped through the cracks, since the sbc board was added
+ after I wrote the original patch to remove all these symbols, and
+ before it was merged.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Aug 29 14:05:30 2007 +0200
+
+ Add mii_init() prototype
+
+ to get rid of a *lot* of compiler warnings.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Aug 29 13:35:03 2007 +0200
+
+ Disable network support on cmi_mpc5xx board
+
+ ..because it caused compiler errors and there seems to be no
+ board maintainer to take care of this.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Aug 20 09:44:00 2007 -0500
+
+ Fix MPC8544DS PCIe3 scsi.
+
+ <ed.swarthout@freescale.com>
+
+ The problem is pciauto_setup_device() getting called from fsl_pci_init.c
+ is allocating memory space it doesn't need.
+
+ Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Tue Aug 21 09:38:59 2007 -0500
+
+ 8548cds fixes
+
+ Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
+ correct consoledev needed for linux boot.
+ Standardize on fdt{file,addr} var to hold dtb file name.
+
+ Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Aug 23 15:20:54 2007 -0400
+
+ Enable L2 cache for MPC8568MDS board
+
+ The L2 cache size is 512KB for 8568, print out the correct informaiton.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Wed Aug 22 17:54:49 2007 +0800
+
+ Remove the bios emulator binary files from MAI board
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Aug 21 17:00:17 2007 -0500
+
+ support board vendor-common makefiles
+
+ if a board/$(VENDOR)/common/Makefile exists, build it.
+
+ also add the first such case, board/freescale/common/Makefile, to
+ handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
+ dictated by board configuration.
+
+ thusly get rid of alternate build dir errors such as:
+
+ FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
+
+ by putting the common/ mkdir command in its proper place (the common
+ Makefile). Common bits from existing individual board Makefiles have
+ been removed.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
+Author: stefano babic <sbabic@denx.de>
+Date: Tue Aug 21 15:52:33 2007 +0200
+
+ Fix: TFTP is not working on little endian systems
+
+ TFTP does not work anymore after multicast tftp
+ patch was applied on little endian systems.
+ This patch fix it.
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 5f470948570526e9186f053a3003da7719604e90
+Author: stefano babic <sbabic@denx.de>
+Date: Tue Aug 21 15:50:33 2007 +0200
+
+ Fix MAC address setting in DM9000 driver.
+
+ The logic to check if there is a correct MAC address in the DM9000
+ EEPROM, added in the last patch, is wrong. Now the MAC address is
+ always taken from the environment, even if a suitable MAC is present
+ in the EEPROM.
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Tue Aug 21 12:40:34 2007 +0200
+
+ MPC5xxx: fix some compiler warnings in USB code
+
+ Fix the following warnings:
+ - usb.c:xx: warning: function declaration isn't a prototype
+ - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
+ from pointer wihtout a cast
+
+ Signed-off-by: Martin Krause <martin.krase@tqs.de>
+
+commit 16e23c3f5dab6937f5109365416808c7f15c122b
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Mon Aug 20 23:55:33 2007 -0500
+
+ fsl_pci_init - Remove self PCSRBAR allocation
+
+ CPU physical address space was being wasted by allocating a
+ PCSRBAR PCI inbound region to it's memory space.
+
+ As a rule, PCSRBAR should be left alone since it does not affect
+ transactions from self and other masters may have changed it.
+
+ Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
+
+commit 0e700ce03a23bb1921149bc77008ace7103d5289
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Aug 20 13:56:47 2007 +0200
+
+ Fix compiler warning in include/s3c2410.h
+
+ This patch fixes the "type qualifiers ignored on fuction return tpye"
+ warning for include/s3c2410.h
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Mon Aug 20 07:09:05 2007 +0200
+
+ Fix compilation error for omap2420h4_config.
+
+ omap2420h4 switched to cfi, so remove old (already disabled) flash.c
+ and flash_probe() calls in env_flash.c.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 10 14:34:14 2007 -0500
+
+ fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
+
+ and make some minor corrections to the FDT part of the README.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Aug 29 01:32:05 2007 +0200
+
+ Minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Tue Aug 28 17:40:33 2007 +0200
+
+ [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit f98984cb194bb34dbe1db9429d3b51133af30d07
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Tue Aug 28 17:39:14 2007 +0200
+
+ IDE: - make ide_inb () and ide_outb () "weak", so boards can
+ define there own I/O functions.
+ (Needed for the pcs440ep board).
+ - The default I/O Functions are again 8 Bit accesses.
+ - Added CONFIG_CMD_IDE for the pcs440ep Board.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
+Author: Semih Hazar <semih.hazar@indefia.com>
+Date: Mon Aug 20 19:00:01 2007 +0300
+
+ AVR32: Change prototype of memset
+
+ Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9c02defc29b57945b600714cf61ddfd02b02fb14
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Sat Aug 25 05:07:16 2007 +0200
+
+ POST: limit memory test area to not touch global data anymore
+
+ As experienced on lwmon5, on some boards the POST memory test can
+ corrupt the global data buffer (bd). This patch fixes this issue
+ by checking and limiting this area.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 75e1a84d483e36be10e206e539b028c4889e1158
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 24 15:41:42 2007 +0200
+
+ ppc4xx: Add RTC POST test to lwmon5 board configuration
+
+ Since this RTC POST test is taking quite a while to complete
+ it's only initiated upon special keypress same as the complete
+ memory POST.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d7bfa620037a6d2210159387571bdf93aa32c162
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 24 15:19:10 2007 +0200
+
+ ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Aug 23 11:02:37 2007 +0200
+
+ ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
+
+ This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
+ board. Now the "eeprom" command can be used to read/write from/to this
+ device. Additionally a new command was added "eepromwp" to en-/disable
+ the write-protect of this 2nd EEPROM.
+
+ The 1st EEPROM is not affected by this write-protect command.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c64fb30e4c5976007d56fc1789c7a0666082b536
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Aug 22 08:56:09 2007 +0200
+
+ ppc4xx: Remove unused option CFG_INIT_RAM_OCM
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 21 16:27:57 2007 +0200
+
+ ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
+
+ This patch adds support for the matrix keyboard on the lwmon5 board.
+ Since the implementation in the dsPCI is kind of compatible with the
+ "old" lwmon board, most of the code is copied from the lwmon
+ board directory.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 19 10:27:34 2007 +0200
+
+ Fix some build errors.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Aug 18 22:00:38 2007 +0200
+
+ Update CHANGELOG.
+
+commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Aug 16 22:52:39 2007 -0500
+
+ lib_ppc: make board_add_ram_info weak
+
+ platforms wishing to display RAM diagnostics in addition to size,
+ can do so, on one line, in their own board_add_ram_info()
+ implementation.
+
+ this consequently eliminates CONFIG_ADD_RAM_INFO.
+
+ Thanks to Stefan for the hint.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Fri Aug 17 12:43:44 2007 +0900
+
+ PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
+
+ This patch has been sent on:
+ - 6 Jun 2007
+
+ Many users of PCI config read routines tend to ignore the function
+ ret value, and are only concerned about the contents of *val. Based
+ on this, pci_hose_read_config_{byte,word}_via_dword should initialize
+ the *val on dword read error.
+
+ Without this fix, for example, we'll go on scanning bus with vendor or
+ header_type uninitialized. This brings many unnecessary config trials.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Aug 18 14:37:52 2007 +0200
+
+ ColdFire: Fix some remaining problems with CFG_CMD_
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8280f6a1c43247616b68224675188e5ccd124650
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Aug 18 14:33:02 2007 +0200
+
+ Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Aug 16 19:23:50 2007 -0500
+
+ ColdFire: Add M5235EVB Platform for MCF523x
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 17 09:30:00 2007 -0500
+
+ mpc83xx: fix typo in DDR2 programming
+
+ introduced in the implement board_add_ram_info patch as I was cleaning out the
+ magic numbers. sorry.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e58fe95784d2514fc9c21028dc59f2b319a35d80
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Aug 16 22:53:09 2007 -0500
+
+ mpc83xx: move freescale boards to boards/freescale
+
+ includes build fixes.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Aug 16 22:52:59 2007 -0500
+
+ mpc83xx: suppress unused variable 'val8' warning
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit bbea46f76f767b919070b4829bf34c86bd223248
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Aug 16 22:52:48 2007 -0500
+
+ mpc83xx: implement board_add_ram_info
+
+ add board_add_ram_info, to make memory diagnostic output more
+ consistent. u-boot banner output now looks like:
+
+ DRAM: 256 MB (DDR1, 64-bit, ECC on)
+
+ and for boards with SDRAM on the local bus, a line such as this is
+ added:
+
+ SDRAM: 64 MB (local bus)
+
+ also replaced some magic numbers with their equivalent define names.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 14778585d1389d86d5846efec29e5fce892680ce
+Author: Tony Li <tony.li@freescale.com>
+Date: Fri Aug 17 10:35:59 2007 +0800
+
+ mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
+
+ The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
+ And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
+
+ Signed-off-by Tony Li <tony.li@freescale.com>
+
+commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Aug 16 15:05:11 2007 -0500
+
+ ColdFire: Add M54455EVB for MCF5445x
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Aug 16 13:20:50 2007 -0500
+
+ ColdFire: Add M5253EVBE platform for MCF52x2
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit a605aacd8324094199402816cc6d9124aba57b8d
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Aug 16 05:04:31 2007 -0500
+
+ ColdFire: Add M5249EVB platform for MCF52x2
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 20:32:06 2007 -0500
+
+ ColdFire: Update Freescale MCF52x2 platforms
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 19:55:10 2007 -0500
+
+ ColdFire: Update EB+MCF-EV123 platform
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 19:46:38 2007 -0500
+
+ ColdFire: update TASREG platform for MCF52x2
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 19:45:51 2007 -0500
+
+ ColdFire: update r5200 platform for MCF52x2
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 19:43:20 2007 -0500
+
+ ColdFire: idmr platform MCF52x2 update
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 19:41:06 2007 -0500
+
+ ColdFire: cobra5272 platform for MCF52x2 update
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 56115665b4a64c10c01440c57749b265e0908fa4
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 19:38:15 2007 -0500
+
+ ColdFire: MCF52x2 Header files update
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 19:21:21 2007 -0500
+
+ ColdFire: MCF52x2 update
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 18:46:11 2007 -0500
+
+ ColdFire: MCF5329 update cache
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 7171977fb8fd77cfb6676953fa9a05789c450513
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 15:40:20 2007 -0500
+
+ ColdFire: MCF5329 header file clean up
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 15:39:17 2007 -0500
+
+ ColdFire: MCF5329 Update and cleanup
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 10327dc5541f947c0cf7e31fef86c4706169607a
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Aug 16 16:35:02 2007 -0500
+
+ Add CONFIG_HAS_ETH0 to all boards with TSEC
+
+ The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
+ to update TSEC1's device-tree node, so we need to add it
+ to all the boards with TSECs. Do this for 83xx and 86xx, too,
+ since they will eventually do something similar.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Aug 16 15:05:04 2007 -0500
+
+ Update MPC8544 DS PCI memory map
+
+ The PCIe bus that the ULI M1575 is connected to has no possible way of
+ needing more than the fixed amount of IO & Memory space needed by the ULI.
+
+ So make it use far less IO & memory space and have it use the shared LAW. This
+ free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
+ by each bus.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ea5877e31ed63ade948fd1293895ec23fe01472e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Aug 16 11:01:21 2007 -0500
+
+ Fix up some fdt issues on 8544DS
+
+ It looks like we had a merge issue that duplicated a bit of code
+ in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
+ the MAC address properly set in the device tree on boot for TSEC1
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Thu Aug 16 15:16:03 2007 +0200
+
+ PPC4xx:HCU4/5 cleanup
+
+ Minor cleanups to confirm to the u-boot coding style.
+ Some german expressions -> english.
+ HCU5 enforces a unique IP adress for a given slot in the rack.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Thu Aug 16 15:16:02 2007 +0200
+
+ PPC4xx:HCU4/5 cleanup ecc/sdram init
+
+ Make ecc initialisation robust, as DDR2-ECC errors may be generated
+ while zeroing the RAM.
+
+ Return 16 bytes (a cacheline) less than the available memory, as the
+ board and/or PPC440EPx might have problems accessing the last bytes.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit d35b508a55508535b6e8445b718585d27df733d3
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 15 22:29:56 2007 -0500
+
+ fdt: suppress unused variable 'bd' warning
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 82bd9ee77490588d4da785d75829ca63d0176baf
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Aug 15 20:06:50 2007 -0500
+
+ Fix warnings from of_data copy fix
+
+ Forgot to cast of_flat_tree to ulong.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 7613afda77d5eec0f47d303025b0c661b70e4c73
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Aug 15 20:03:44 2007 -0500
+
+ Don't wait for disconnected TSECs
+
+ The TSEC driver's PHY code waits a long time for autonegotiation to
+ complete, even if the link is down. The PHY knows the link is
+ down or up before autonegotiation completes, so we can short-circuit
+ the process if the link is down.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit b96c83d4ae475a70ef2635cd0e748174c44c8601
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Aug 15 20:03:34 2007 -0500
+
+ Fix numerous bugs in the 8568 UEC support
+
+ Actually, fixed a large bug in the UEC for *all* platforms.
+ How did this ever work?
+
+ uec_init() did not follow the spec for eth_init(), and returned
+ 0 on success. Switch it to return the link like tsec_init()
+ (and 0 on error)
+
+ The immap for the 8568 was defined based on MPC8568, rather than
+ CONFIG_MPC8568
+
+ CONFIG_QE was off
+
+ CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
+
+ Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
+ enabled
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 3a79013e2adda53332dfd0b511066a805e929a9d
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Aug 15 20:03:25 2007 -0500
+
+ Define tsec flag values in config files
+
+ The tsec_info structure and array has a "flags" field for each
+ ethernet controller. This field is the only reason there are
+ settings. Switch to defining TSECn_FLAGS for each controller
+ in the config header, and we can greatly simplify the array, and
+ also simplify the addition of future boards.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit ec7238229507e7f47533a611ea8c53319d234cf3
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Aug 15 20:03:13 2007 -0500
+
+ Add support for building all boards with a TSEC
+
+ Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
+ Now we can do a MAKEALL test on all of them!
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Aug 15 17:30:56 2007 -0500
+
+ Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
+
+ The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
+ neglected to *also* put the code inside the similar #ifdef
+ for CONFIG_OF_FLAT_TREE.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 78f9fef7f406078c8bf7191e665a73f795157746
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Aug 15 15:46:46 2007 -0500
+
+ mpc885ads: Don't define CONFIG_BZIP2.
+
+ bzip2 requires a significant chunk of malloc space, and there isn't
+ enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
+ and a downloaded image at 0x400000.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 002275a3ed8b114885f6702d6d544d0780dfe689
+Author: Michal Simek <Monstr@seznam.cz>
+Date: Thu Aug 16 08:54:10 2007 +0200
+
+ Bios emulator - fix microblaze toolchain problem
+
+ microblaze CPU have problem with bios_emulator code.
+ Microblaze toolchain doesn't support PRAGMA PACK.
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 16 11:51:04 2007 +0200
+
+ Minor Coding Style fix; Update CHANGELOG file.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Aug 16 11:21:49 2007 +0200
+
+ ppc4xx: Remove #warning in esd auto_update.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2d78074d2e806edc380c1464eb9e5df335ece65e
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 22 17:32:28 2007 +0200
+
+ ppc7xx: Update CPCI750 board
+
+ This small CPCI750 update extends the board specific command
+ "show_config" to display the Marvell strapping registers and
+ extends the PCI IDE controller.
+
+ Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Thu Aug 16 10:46:28 2007 +0200
+
+ [FIX] Changes for bios_emulator code for others architecture
+
+commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
+Author: Michal Simek <monstr@monstr.eu>
+Date: Thu Aug 16 10:45:09 2007 +0200
+
+ [FIX] Remove unused include file
+
+commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Aug 16 10:18:33 2007 +0200
+
+ ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Aug 16 09:54:51 2007 +0200
+
+ Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 02ba7022f62bb75908296c58c63866e1d294b69a
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Aug 16 09:52:29 2007 +0200
+
+ ppc4xx: Update Sequoia/Rainier bootstrap command
+
+ As suggested by David Mitchell, here an update for the Sequoia/Rainier
+ bootstrap command.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 35cc4e4823668e8745854899cfaedd4489beb0ef
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 15 22:30:39 2007 -0500
+
+ mpc83xx: enable libfdt by default on freescale boards
+
+ this enables libfdt code by default for the
+ freescale mpc8313erdb, mpc832xemds, mpc8349emds,
+ mpc8349itx and gp boards.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3fde9e8b22cfbd7af489214758f9839a206576cb
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 15 22:30:33 2007 -0500
+
+ mpc83xx: migrate remaining freescale boards to libfdt
+
+ this adds libfdt support code for the freescale
+ mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
+ and gp boards.
+
+ Boards remain compatible with OF_FLAT_TREE.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 15 22:30:26 2007 -0500
+
+ mpc83xx: move common /memory node update mechanism to cpu.c
+
+ also adds common prototypes to include/common.h.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 15 22:30:19 2007 -0500
+
+ mpc83xx: remaining 8360 libfdt fixes
+
+ PCI clocks and QE frequencies weren't being updated, and the core clock
+ was being updated incorrectly. This patch also adds a /memory node if
+ it doesn't already exist prior to update.
+
+ plus some cosmetic trimming to single line comments.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 15 22:30:12 2007 -0500
+
+ mpc83xx: fix UEC2->1 typo in libfdt setup code
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 15 22:30:05 2007 -0500
+
+ mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
+
+ and reorder the existing 83xx maintainers alpha.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5b4de9309d7a03aa1db2e5391ab696363391f460
+Author: Michal Simek <monstr@monstr.eu>
+Date: Wed Aug 15 21:15:05 2007 +0200
+
+ [FIX] Resolve problem with warnings
+ microblaze toolchain don't support PRAGMA PACK.
+
+commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
+Author: Michal Simek <monstr@monstr.eu>
+Date: Wed Aug 15 21:05:07 2007 +0200
+
+ [FIX] Correction command setting for Microblaze boards
+
+commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
+Author: Michal Simek <monstr@monstr.eu>
+Date: Wed Aug 15 21:03:41 2007 +0200
+
+ [FIX] Correction command definition
+
+commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Aug 15 11:55:35 2007 -0500
+
+ 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
+
+ Remove a leftover in net/tftp.c while we're at it.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Aug 15 12:20:40 2007 -0500
+
+ Move the MPC8641HPCN board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8662577fe36fdb6a44b55b998d9daac6392a736a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Aug 15 11:46:22 2007 -0500
+
+ 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
+
+ Remove a leftover in net/tftp.c while we're at it.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 210f463c71917b7a4495c2103c228b9c179ae64d
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Wed Aug 15 11:13:15 2007 -0400
+
+ Fix where the #ifdef CFG_BOOTMAPSZ is placed.
+
+ Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
+ interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
+ when it should have gone inside of the conditional. As a result, it
+ broke non-LIBFDT board builds.
+
+ Also added a missing "not." to the comment.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 0e19209767194a97cec6d93dba9e64d1da8d548e
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Wed Aug 15 12:14:23 2007 +0200
+
+ PPC4xx:HCU4/5-Board fix compile warning
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Tue Aug 14 14:06:45 2007 -0500
+
+ Fix malloc size error in ahci_init_one.
+
+ Typically this causes scsi init to corrupt the
+ devlist and break the coninfo command.
+ Fix a compiler size warning.
+
+ Signed-off-by: Jason Jin <jason.jin@freescale.com>
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit b361acd64fd2525c081b9b288b0804efe209c0e9
+Author: ksi@koi8.net <ksi@koi8.net>
+Date: Tue Aug 14 10:02:16 2007 -0700
+
+ TI DaVinci - fix unsupported %hhx format
+
+ Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
+
+commit f01dbb5424a81453c81190dd30e945891466f621
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 14 18:42:36 2007 +0200
+
+ Coding style cleanup. Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Aug 14 10:32:59 2007 -0500
+
+ Fix initrd/dtb interaction
+
+ The original code would wrongly relocate the blob to be right before
+ the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
+ if it is defined. So we make two changes:
+
+ 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
+
+ 2) If the blob is being relocated, relocate it before kbd, not initrd
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit e54b970173769307a116bd34028b6d0c2eea2a4e
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Aug 14 15:40:00 2007 +0100
+
+ Supply spi interface in at45.c
+
+commit 4ce846ec59f36b85d6644a769690ad3feb667575
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 14 15:12:01 2007 +0200
+
+ POST: Fix merge problem
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 14 15:03:17 2007 +0200
+
+ Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 779e975117a75e91fcebe226a63104dbfb924ab1
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 14 14:44:41 2007 +0200
+
+ ppc4xx: Add initial Zeus (PPC405EP) board support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c5a172a5fd636c12467429e3f7910e53773979c6
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 14 14:41:55 2007 +0200
+
+ POST: Add option for external ethernet loopback test
+
+ When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
+ is not done using an internal loopback connection, but by assuming
+ that an external loopback connector is plugged into the board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit eb2b4010ae426245172988804ee8d9193fb41038
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 14 14:39:44 2007 +0200
+
+ POST: Add ppc405 support to cache and UART POST
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Aug 14 10:46:32 2007 +0100
+
+ Replace lost end of at45.c.
+
+commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Aug 14 10:30:06 2007 +0100
+
+ Update Makefiles for merged and split at45.c.
+
+commit 3454cece2db57cb9eb7087995f7e73066a163f71
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Aug 14 10:21:06 2007 +0100
+
+ Delete the merged files.
+
+commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Aug 14 10:14:05 2007 +0100
+
+ Add the files.
+
+commit d4fc6012fd0a5c211b825691f44b06f8032c0551
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Aug 14 10:10:52 2007 +0100
+
+ Add MACH_TYPE records for several AT91 boards.
+ Merge to two at45.c files into a common file, split to at45.c and spi.c
+ Fix spelling error in DM9161 PHY Support.
+ Initialize at91rm9200 board (and set LED).
+ Add PIO control for at91rm9200dk LEDs and Mux.
+ Change dataflash partition boundaries to be compatible with Linux 2.6.
+
+ Signed-off-by: Peter Pearse <peter.pearse@arm.com>
+ Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
+
+commit 4ef35e53c693556c54b0c22d6f873de87bade253
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 14 09:54:46 2007 +0200
+
+ Coding style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 14 09:47:27 2007 +0200
+
+ Coding style cleanup; rebuild CHANGELOG
+
+commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
+Author: Randy Vinson <rvinson@linuxbox.(none)>
+Date: Tue Feb 27 19:42:22 2007 -0700
+
+ 85xxCDS: Add make targets for legacy systems.
+
+ The PCI ID select values on the Arcadia main board differ depending
+ on the version of the hardware. The standard configuration supports
+ Rev 3.1. The legacy target supports Rev 2.x.
+
+ Signed-off-by Randy Vinson <rvinson@mvista.com>
+
+commit e41094c7e38177c755fbd9b182018069614f080d
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Aug 14 01:50:09 2007 -0500
+
+ 85xxCDS: Enable the VIA PCI-to-ISA bridge.
+
+ Author: Randy Vinson <rvinson@linuxbox.(none)>
+
+ Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
+ Arcadia main board.
+
+ Signed-off-by: Randy Vinson <rvinson@mvista.com>
+ Signed-off-by: York Sun <yorksun@freescale.com>
+
+commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Aug 14 00:14:25 2007 -0500
+
+ Add support for UEC to 8568
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit c59e4091ffe0148398b9e9ff14a019ea038b7432
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue Jun 19 14:18:34 2007 -0400
+
+ Add PCI support for MPC8568MDS board
+
+ This patch is against u-boot-mpc85xx.git of www.denx.com
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
+
+commit d111d6382c99fdea08c2312eeeae8786945e189a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue Jun 19 14:18:32 2007 -0400
+
+ Empirically set cpo and clk_adjust for mpc85xx DDR2 support
+
+ This patch is against u-boot-mpc85xx.git of www.denx.com
+
+ Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
+ both MPC8548CDS board and MPC8568MDS board, especially for supporting
+ 533MHz DDR2.
+
+ Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
+ DDR2 on all current board versions especially ver 1.92 or later to bring
+ up.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 3db0bef59eab1155801618cef5c481e97553b597
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 7 18:07:27 2007 -0500
+
+ Use an absolute address when jumping out of 4k boot page
+
+ On e500 when we leave the 4k boot page we should use an absolute address since
+ we don't know where the board code may want us to be really running at.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Aug 13 14:49:59 2007 -0500
+
+ MPC85xx BA bits not set for 3-bit bank address DIMM
+
+ The current implementation does not set the number of bank address bits
+ (BA) in the processor. The default assumes 2 logical bank bits. This
+ works fine for a DIMM that uses devices with 4 internal banks (SPD
+ byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
+ devices with 8 internal banks (SPD byte17 = 0x8).
+
+ Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
+
+commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Aug 13 14:38:06 2007 -0500
+
+ Fix minor 85xx warnings
+
+ Some patches had inserted warnings into the build:
+ * mpc8560ads declared data without using it
+ * cpu_init declared ecm and immap without using it in all CONFIGs
+ * MPC8548CDS.h had its default filenames changed so that they contained
+ "\m" in the paths. Made the defaults not Windows-specific (or
+ anything-specific)
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit f2cff6b104f82b993bef6086ce0c97159bbe1add
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Jul 27 01:50:52 2007 -0500
+
+ 8548cds PCIE support.
+
+ Make the early L1 cache stack region guarded to prevent speculative
+ fetches outside the locked range.
+
+ Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
+ init.S whitespace cleanup.
+
+ Allow TEXT_BASE value to be specified on command line. This allows it
+ to be set to 0xfffc0000 which cuts the uboot binary in half.
+
+ Clear and enable lbc and ecm errors.
+
+ Update last_busno in device-tree for pci and pcie.
+
+ Remove load of obsolete cpu/mpc85xx/pci.0
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Jul 27 01:50:51 2007 -0500
+
+ 8544ds PCIE support
+
+ PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
+
+ Enable LBC and ECM errors and clear error registers.
+
+ Add tftpflash env var to get uboot from tftp server and flash it.
+
+ Add pci/pcie convenience env vars to display register space:
+ "run pcie3regs" to see all pcie3 ccsr registers
+ "run pcie3cfg" to see all cfg registers
+ Whitespace cleanup and MPC8544DS.h
+
+ Enable CONFIG_INTERRUPTS.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Aug 14 01:34:21 2007 -0500
+
+ 85xx start.S cleanup and exception support
+
+ From: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+ Support external interrupts from platform to eliminate system hangs.
+ Define CONFIG_INTERRUPTS board configure option to enable.
+ Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
+
+ Remove extra cpu initialization redundant with hardware initialization.
+ Whitespace cleanup.
+
+ Define and use _START_OFFSET consistent with other processors using
+ ppc_asm.tmpl
+
+ Move additional code from .text to boot page to make room for
+ exception vectors at start of image.
+
+ Handle Machine Check, External and Critical exceptions.
+
+ Fix e500 machine check error determination in traps.c
+
+ TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Aug 14 01:33:18 2007 -0500
+
+ Add MPC8544DS README
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Jul 27 01:50:48 2007 -0500
+
+ 85xx allow debugger to configure ddr.
+
+ Only check for mpc8548 rev 1 when compiled for 8548.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Jul 27 01:50:47 2007 -0500
+
+ mpc85xx L2 cache reporting and SRAM relocation option.
+
+ Allow debugger to override flash cs0/cs1 settings to enable alternate
+ boot regions
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Jul 27 01:50:46 2007 -0500
+
+ e500 needs ppc_asm.tmp MCK_EXCEPTION
+
+ Always define MCK_EXCEPTION macro - so e500 can use it too.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 53a5c424bf8655b7b4e2c305a441963259a26a81
+Author: David Updegraff <dave@cray.com>
+Date: Mon Jun 11 10:41:07 2007 -0500
+
+ multicast tftp: RFC2090
+
+ Implemented IETF RFC2090, Multicast TFTP. Initial implementation
+ on Realtek RTL8139 and Freescale TSEC.
+
+ Signed-off-by: David Updegraff <dave@cray.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
+Author: Wilson Callan <wcallan@savantav.com>
+Date: Sat Jul 28 10:56:13 2007 -0400
+
+ New CONFIG_BOOTP_SERVERIP option
+
+ Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
+ from the bootp server
+
+ Signed-off-by: Wilson Callan <wcallan@savantav.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
+Author: Mike Rapoport <mike@compulab.co.il>
+Date: Sun Aug 12 08:48:27 2007 +0300
+
+ Add ability to take MAC address from the environment to DM9000 driver
+
+ Signed-off-by: Mike Rapoport <mike@compulab.co.il>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit be5d72d10d47609326226225181e301fb9a33b58
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 13 21:57:53 2007 +0200
+
+ Minor coding style cleanup. Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
+Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
+Date: Sat Aug 11 06:54:58 2007 -0500
+
+ Modify SBC8641D to use new Freescale PCI routines
+
+ PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
+ adapter.
+
+ Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+ Signde-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a08458303e7f9db67f296980036d3292c35cb45c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Jun 29 18:38:51 2007 +0200
+
+ atmel_mci: Fix data timeout value
+
+ Calculate the data timeout based on values from the CSD instead of
+ just using a hardcoded DTOR value. This is a backport of a similar fix
+ in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
+ instead of down.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Aug 13 17:22:31 2007 +0200
+
+ AVR32: Include <div64.h> instead of <asm/div64.h>
+
+ include/asm-avr32/div64.h was recently moved to include/div64.h, but
+ cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
+ the patch was merged perhaps?)
+
+ This patch updates cpu/at32ap/interrupts.c so that the avr32 port
+ compiles again.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Jun 27 13:34:26 2007 +0200
+
+ atmel_mci: Use 512 byte blocksize if possible
+
+ Instead of always using the largest blocksize the card supports, check
+ if it can support smaller block sizes and use 512 bytes if possible.
+ Most cards do support this, and other parts of u-boot seem to have
+ trouble with block sizes different from 512 bytes.
+
+ Also enable underrun/overrun protection.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+
+commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Aug 13 09:05:33 2007 +0200
+
+ ppc4xx: Fix problem in PLL clock calculation
+
+ This patch was originall provided by David Mitchell <dmitchell@amcc.com>
+ and fixes a bug in the PLL clock calculation.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 21:34:50 2007 +0200
+
+ Update CHANGELOG
+
+commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 21:34:34 2007 +0200
+
+ Minor alignment of output, 2nd try.
+ Also update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6b309f22a724fad8418e811751a0741b893419cf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 20:35:49 2007 +0200
+
+ Minor alignment of output
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 18:28:18 2007 +0200
+
+ Cleanup output on ADS5121 board
+
+ Signed-off-by: Wolfgang Denk
+
+commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 15:11:38 2007 +0200
+
+ Adapt board configuration and fix kernel crash on MCC200 board.
+
+ The update procedure was modified to turn off the USB subsystem
+ before exit for MCC200 and TRAB. This is necessary as otherwise the
+ USB controller continues to write periodically to system memory!
+
+ MCC200-specific notes:
+ - the patch disables the magic key check for MCC200
+ - the patch contains the configuration changes made
+ for the new revision of the board.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 14:47:54 2007 +0200
+
+ Adjust default configuration of ADS5121 board.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 14:27:39 2007 +0200
+
+ Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5fe6be6208dda852c3564e384bd78d75784dea3e
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Tue Aug 7 21:14:22 2007 -0400
+
+ Improve error print messages.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jul 17 13:57:04 2007 -0500
+
+ fdt: allow for builds that don't want env and bd_t nodes
+
+ protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
+ area.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 91148bf7aeba142d6f348805db7625db7da64d6f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jul 17 13:56:53 2007 -0500
+
+ fdt: do board setup based on fdt address specified on bootm line
+
+ The last fdt patch to bootm did board setup based on the address
+ specified by a prior fdt address command invocation. The bootm
+ code, as its call to fdt_chosen does, should use the fdt specified
+ by the user on the bootm command. Note this restores full
+ functionality for the 8360's existing default boot environment
+ values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
+ before booting a kernel).
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e125a2ffc209dd34794e326c7175658253beadf3
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Tue Jul 10 20:40:39 2007 -0400
+
+ Call ft_board_setup() from the bootm command.
+
+ In the patch titled "Create new fdt boardsetup command..." I removed the
+ call to ft_board_setup() from the routine fdt_chosen(), but I forgot
+ to add a direct call back into cmd_bootm.c
+
+ This fixes the oversight by adding the direct call to the bootm command.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Mon Jun 25 23:25:28 2007 -0400
+
+ Create new fdt boardsetup command, fix bug parsing [] form of set values.
+
+ Previously ft_board_setup() was called by fdt_chosen() which was not
+ really correctly structured. This splits ft_board_setup() out by creating
+ a new fdt boardsetup command.
+
+ Fix a bug when parsing fdt set command values which have the square
+ bracket form [00 11 22 33] - the length was updated incorrectly in when
+ parsing that form.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 6f35ded9e85493595e0eb66a82b502a95326d049
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Mon Jun 25 20:55:58 2007 -0400
+
+ Tighten up the error messages.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit c45874b05aae897a6c29d1a97d4bb708fca2756c
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Mon Jun 25 19:52:23 2007 -0400
+
+ Asthetic improvements: error messages and line lengths.
+
+ Tighten up the error messages, split overlength lines.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri May 25 22:08:57 2007 -0400
+
+ Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
+
+ The fdt_chosen() function was adding/seting some properties ad-hoc
+ improperly and duplicated (poorly) what was done in ft_board_setup()
+
+ Clean up long lines (setting properties, printing errors).
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 06e19a07701c968f15d72c083b5872a1a11c7b01
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Mon May 21 23:27:16 2007 -0400
+
+ For fdt_find_node_by_path(), handle the root path properly.
+
+ Also removes the special case root path detection in cmd_fdt.c since it
+ is no longer necessary.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Thu May 17 23:54:36 2007 -0400
+
+ Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 1a861169bc3758f9de3aead62b058736c6891246
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Jun 6 22:47:58 2007 -0400
+
+ Replace fdt_node_offset() with fdt_find_node_by_path().
+
+ The new name matches more closely the kernel's name, which is also
+ a much better description.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed May 16 22:39:59 2007 -0400
+
+ Fix cmd_fdt line lengths, refactor code.
+
+ Break lines that were greater than 80 characters in length.
+ Move the fdt print and property parsing code to separate static functions
+ to reduce coding clutter in the fdt_cmd handling body.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 25114033ab21788810c48ba4df103b649da1223b
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat May 12 09:47:25 2007 -0400
+
+ FDT command improvements.
+
+ Fix "fdt set" so that it will create a non-existing property.
+ Add "fdt mknode" to create nodes.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 38eb508e8e811e2e57628f445de3a24a23c7d804
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat May 12 09:45:46 2007 -0400
+
+ Reorganize and fix problems (returns) in the bootm command.
+
+ Do *NOT* return after the "point of no return" has been passed.
+ If something goes wrong, the board must be reset after that point.
+ Move the "Transferring control to Linux" debug message back to where it
+ belongs: just before transferring control to linux.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 89c8757d8f213c47709bdc4efe0695263a6080a6
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Tue May 8 21:27:35 2007 -0400
+
+ Fix bugs in the CONFIG_OF_LIBFDT
+
+ Stupid coding mistakes (identified by Timur Tabi, thanks).
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Apr 25 22:47:15 2007 -0400
+
+ Improve fdt move length handling.
+
+ Make the length parameter optional: if not specified, do the move using
+ the current size unchanged.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Apr 25 22:23:36 2007 -0400
+
+ Minor code clean up.
+
+ Declare the variable fdt properly as extern.
+ Call the "set_fn" function pointer the "short way" without the full
+ dereferencing syntax.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Apr 25 21:24:27 2007 -0400
+
+ Improve error messages, more informative.
+
+ Print more than the raw libfdt error message strings. This is especially
+ useful for cluing in the user when the bootm command aborts due to
+ blob problems.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Apr 20 22:46:53 2007 -0400
+
+ libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
+
+ This is the way u-boot reduces configured-out code. At Wolfgang
+ Grandegger and Wolfgang Denk's request, make libfdt conform.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 923efd286411ed052d9e074f59f8986d6081061c
+Author: Bruce Adler <bruce.adler@ccpu.com>
+Date: Fri Aug 10 14:54:47 2007 -0700
+
+ add image size and descriptors for Spartan 3E FPGA chips
+
+ Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
+
+ Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
+
+commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 10 15:34:48 2007 -0500
+
+ make MAKEALL more immune to merge conflicts
+
+ ..by placing board entries one per line, as suggested by jdl.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 10 13:28:25 2007 -0500
+
+ README: Remove outdated cpu type, board type, and NAME_config lists
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 49bb59912d21aacb507eb81fd21fb7af650c706c
+Author: Dave Liu <r63238@freescale.com>
+Date: Fri Aug 10 15:48:59 2007 +0800
+
+ mpc83xx: Suppress the warning 'burstlen'
+
+ suppress the warning 'burstlen' of spd_sdram.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit c646bba6465a45c60746d4cc1602cd06c1960f2d
+Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
+Date: Thu Aug 9 15:11:03 2007 -0500
+
+ Add support for SBC8641D. Config files.
+
+ Add support for Wind River's SBC8641D reference board.
+
+ Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8ac273271d57321f90505c7a51cdb1ef2113b628
+Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
+Date: Thu Aug 9 15:10:53 2007 -0500
+
+ Add support for SBC8641D. Board files.
+
+ Add support for Wind River's SBC8641D reference board.
+
+ Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit c2c0ab4aff86622b837a48a0e560351f9afafb95
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 10 20:34:58 2007 +0200
+
+ Conding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
+Author: Sergey Kubushyn <ksi@koi8.net>
+Date: Fri Aug 10 20:26:18 2007 +0200
+
+ [ARM] TI DaVinci support, hopefully final
+
+ Add support for the following DaVinci boards:
+ - DV_EVM
+ - SCHMOOGIE
+ - SONATA
+
+ Changes:
+
+ - Split into separate board directories
+ - Removed changes to MTD_DEBUG (or whatever it's called)
+ - New CONFIG_CMD party line followed
+ - Some cosmetic fixes, cleanup etc.
+ - Patches against the latest U-Boot tree as of now.
+ - Fixed CONFIG_CMD_NET in net files.
+ - Fixed CONFIG_CMD_EEPROM for schmoogie.
+ - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
+ DV_EVM. Can't check if it works on SONATA, don't have a board any more,
+ but it at least compiles.
+
+ Here is an excerpt from session log on SCHMOOGIE...
+
+ U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
+
+ DRAM: 128 MB
+ NAND: 128 MiB
+ In: serial
+ Out: serial
+ Err: serial
+ ARM Clock : 297MHz
+ DDR Clock : 162MHz
+ ETH PHY : DP83848 @ 0x01
+ U-Boot > iprobe
+ Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
+ U-Boot > ping 192.168.253.10
+ host 192.168.253.10 is alive
+ U-Boot >
+
+ Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
+ Acked-by: Dirk Behme <dirk.behme@gmail.com>
+ Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Jul 27 01:50:45 2007 -0500
+
+ fsl_pci_init cleanup.
+
+ Do not enable normal errors created during probe (master abort, perr,
+ and pcie Invalid Configuration access).
+
+ Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Jul 27 01:50:44 2007 -0500
+
+ pciauto_setup_device bars_num fix
+
+ Passing bars_num=0 to pciauto_setup_device should assign no bars.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Aug 6 17:39:44 2007 -0500
+
+ 8641hpcn: Do correct sized pointer math.
+
+ When I rebased Ed's patch and cleaned up a few compilation
+ problems, I apparently rebased my brain on crack first.
+ Fix that by doing (char *) sized pointer math as needed.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit cfc7a7f5bb3273c9951173c788001d45118f141f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Aug 2 14:42:20 2007 -0500
+
+ cpu/86xx fixes.
+
+ Remove rev 1 fixes.
+ Always set PICGCR_MODE.
+ Enable machine check and provide board config option
+ to set and handle SoC error interrupts.
+
+ Include MSSSR0 in error message.
+
+ Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 10 10:42:25 2007 +0200
+
+ Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Thu Aug 2 17:42:08 2007 +0200
+
+ Make use of generic 64bit division in nand_util.c
+
+ Use generic 64bit division in nand_util.c. This makes nand_util.c
+ independent of any toolchain 64bit division.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit f7c086e94e8ce9aad7268af97f73aa6884686f27
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Thu Aug 2 17:41:14 2007 +0200
+
+ Move 64bit division from avr32 to generic lib
+
+ Move the 64bit division from lib_avr32 to lib_generic. With this, all
+ boards can do_div/__div64_32 if needed, not only avr one. Code is put
+ to lib_generic, so no larger memory footprint if not used. No code
+ modifications. Thanks for proposal by Håvard Skinnemoen.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:31:22 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:30:33 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit e8397fc78c9394d71de233a4d810fbc9047e4c76
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:38:26 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: common files
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:28:44 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: make related
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 137fdd9f474ecb853efdace5200576308c67f18d
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:28:03 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:27:15 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:25:31 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: READMEs
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:37:40 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
+
+ This series of patches adds support for 2 boards from Netstal Maschinen.
+
+ The HCU4 has a PPC405Gpr and
+ the HCU5 has a PPC440EPX.
+
+ The HCU4 has a somehow complicated flash setup, as the booteprom is
+ only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
+ elegant solution.
+
+ The HCU5 has only a booteprom as the whole code will be downloaded from a
+ different board which has HD, CD-ROM, etc and where all code is stored.
+
+ This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
+ Thanks them a lot.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 10 08:42:55 2007 +0200
+
+ ppc4xx: Update lwmon5 POST configuration
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Aug 10 08:25:22 2007 +0200
+
+ POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
+
+ The patch adds support for UART POST on ppc44x-based boards with no
+ external serial clocks installed.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Aug 6 18:18:34 2007 -0500
+
+ mpc83xx: fix ITX[GP] O=builddir builds
+
+ make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
+
+ Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
+ "BUILD_DIR=<some dir> ./MAKEALL ..."
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Aug 1 15:00:59 2007 +0800
+
+ mpc83xx: Correct the README for DDR ECC
+
+ Update the README for DDR ECC, change the name
+ to README.mpc83xx.ddrecc.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Aug 1 15:00:15 2007 +0800
+
+ mpc83xx: Consolidate the ECC support of 83xx
+
+ Remove the duplicated source code of ecc command on the <board>.c,
+ for reused, move these code to cpu/mpc83xx directory.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 036575c544cf1b69654d8fb334bda69c6ff3da36
+Author: Dave Liu <r63238@freescale.com>
+Date: Sat Aug 4 13:37:39 2007 +0800
+
+ mpc83xx: Correct the burst length for DDR2 with 32 bits
+
+ The burst length should be 4 for DDR2 with 32 bits bus
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Jul 25 19:25:33 2007 -0500
+
+ mpc83xx: add support for the MPC8323E RDB
+
+ MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
+ five 10/100 ethernet ports connected via an ICPlus IP175C
+ switch, one PCI slot, and serial. Features not supported
+ in this patch are SD card interface, 2 USB ports, and the
+ two phone ports.
+
+ Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Jul 25 19:25:28 2007 -0500
+
+ mpc83xx: fixup generic pci for libfdt
+
+ add libfdt support to the generic 83xx pci code
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit f57ac7a7b37109245b69db80839ebee26179966a
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Jul 25 19:25:22 2007 -0500
+
+ mpc83xx: fix 8360 and cpu functions to update fdt being passed
+
+ ..and not the global fdt. Rename local fdt vars to blob so as not to
+ be confused with the global var with the same three-letter name.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Wed Jul 4 21:34:24 2007 -0400
+
+ mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
+
+ Several node strings were not correct (trailing slashes and properties
+ in the strings)
+ Added setting of the timebase-frequency.
+ Improved error messages and use debug() instead of printf().
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 26d02c9bbac1751c5e19294f000100b48d43a920
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Wed Jul 4 21:27:30 2007 -0400
+
+ mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
+
+ The new name matches more closely the kernel's name, which is also
+ a much better description.
+
+ These are the mpc83xx changes made necessary by the function name change.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9be39a67c9f8fef7107f5df09d673005f04d0963
+Author: Dave Liu <daveliu@freescale.com>
+Date: Mon Jun 25 10:41:56 2007 +0800
+
+ mpc83xx: Add support for the display of reset status
+
+ 83xx processor family has many reset sources, such as
+ power on reset, software hard reset, software soft reset,
+ JTAG, bus monitor, software watchdog, check stop reset,
+ external hard reset, external software reset.
+ sometimes, to figure out the fault of system, we need to
+ know the cause of reset early before the prompt of
+ u-boot present.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
+Author: Dave Liu <daveliu@freescale.com>
+Date: Mon Jun 25 10:41:04 2007 +0800
+
+ mpc83xx: Fix the align bug of SDMA buffer
+
+ According to the latest user manual, the SDMA temporary
+ buffer base address must be 4KB aligned.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
+Author: Dave Liu <daveliu@freescale.com>
+Date: Mon Jun 25 13:21:12 2007 +0800
+
+ mpc83xx: Revise the MPC8360EMDS readme doc
+
+ When the rev2.x silicon mount on the MPC8360EMDS baord,
+ and if you are using the u-boot version after the commit
+ 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
+ to make the ethernet interface usable, we have to setup
+ the jumpers correctly.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Jul 3 13:46:32 2007 -0500
+
+ FSL I2C driver programs the two I2C busses differently
+
+ The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
+ The second I2C bus has its slave address programmed incorrectly and is
+ missing a 5-us delay.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Jul 3 13:04:34 2007 -0500
+
+ Update SCCR programming in cpu_init_f() to support all 83xx processors
+
+ Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
+ bitfields for all 83xx processors. The code to update some bitfields was
+ compiled only on some processors. Now, the bitfields are programmed as long
+ as the corresponding CFG_SCCR option is defined in the board header file.
+ This means that the board header file should not define any CFG_SCCR macros
+ for bitfields that don't exist on that processor, otherwise the SCCR will be
+ programmed incorrectly.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9546266999f0b9b51372636614211b88d90f0f25
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Fri Jun 22 13:04:22 2007 +0200
+
+ TQM834x: cleanup configuraton
+
+ Remove irritating #undef DEBUG
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
+Author: david.saada <David.Saada@ecitele.com>
+Date: Mon Jun 18 09:09:53 2007 -0700
+
+ MPC83xx: Fix makefile to generate config.h file in the build directory
+
+ MPC83xx: Fix the Makefile config sections to generate the include/config.h
+ file in the build directory instead of the source directory.
+
+ Signed-off-by: David Saada <david.saada@ecitele.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
+Author: Lee Nipper <Lee.Nipper@freescale.com>
+Date: Thu Jun 14 20:07:33 2007 -0500
+
+ mpc83xx: Add support for 8360 silicon revision 2.1
+
+ This change adds 8360 silicon revision 2.1 support to u-boot.
+
+ Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 8 04:14:28 2007 -0500
+
+ Treat ppc64 host as ppc
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0dc4279b08ff82472bec2e2c90858602459febe8
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Wed Aug 8 09:01:46 2007 +0800
+
+ Minor fix for bios emulator makefile
+
+ Add $(obj) to LIB avoiding objects be built in the source dir
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Wed Aug 8 08:33:11 2007 +0800
+
+ Add CONFIG_BIOSEMU define to guard all the bios emulator code
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+ This patch fix the compile issue on the board that did not enable the bios emulator
+
+commit ed8106433522f2ea8933e9808346860d061d7731
+Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
+Date: Tue Jul 31 12:27:25 2007 -0500
+
+ tsec: fix multiple PHY support
+
+ The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
+ broke multiple PHY support in tsec.c. This fixes it.
+
+ Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
+Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
+Date: Thu Aug 9 09:08:18 2007 -0500
+
+ tsec: Allow Ten Bit Interface address to be configurable
+
+ Allow the address of the Ten Bit Interface (TBI) to be changed in the
+ event of a conflict with another device.
+
+ Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+
+commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Aug 8 09:54:26 2007 +0200
+
+ Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a41de1f0d373e09c782dea558385a06247111ba5
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 05:15:18 2007 -0500
+
+ Port enabled for I2C signals and chipselects port configuration.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 04:31:18 2007 -0500
+
+ Added NAND support
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 04:11:20 2007 -0500
+
+ Added I2C support
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 99c03c175d2689093176facf17c58ce2cb320001
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 03:58:52 2007 -0500
+
+ Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 03:55:21 2007 -0500
+
+ Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 03:43:30 2007 -0500
+
+ Moved sync() from board file to include/asm-m68k/io.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 03:30:44 2007 -0500
+
+ Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 9998bd37ead85e93953559720710d3b0685c81e6
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 03:19:10 2007 -0500
+
+ Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Tue Aug 7 16:17:06 2007 +0800
+
+ Add CONFIG_BIOSEMU define to guard all the bios emulator code
+
+ This patch fix the compile issue on the board that did not enable the bios emulator
+
+commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 7 16:02:13 2007 +0200
+
+ Fix missing brace error in fs/fat/fat.c
+ [pointed out by Roderik Wildenburg]
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 706714d97a0d08d59eda4de2268c39f504688329
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Aug 6 23:41:53 2007 +0200
+
+ [FIX] remove cute code
+
+commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Aug 6 23:35:26 2007 +0200
+
+ [FIX] Fix romfs code
+
+commit ab4b956d3143f8f8174089053f5dfabbb04762b0
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Aug 6 23:31:49 2007 +0200
+
+ [FIX] Coding style cleanup - Wolfgang's suggestions
+
+commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 6 23:21:05 2007 +0200
+
+ Fixed typo in README (pointed out by Martin Jost).
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 537223afa61f64480df31ce440a9cb386df4a814
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Aug 6 21:10:17 2007 +0200
+
+ ppc4xx: Update AMCC Bamboo README doc/README.bamboo
+
+ As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
+ here an updated Bamboo README.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 6 02:17:36 2007 +0200
+
+ Coding style cleanup. Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 221838cc7eb178370ff62aa05920a582e12ac322
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Tue Jul 10 09:03:22 2007 +0800
+
+ Remove the bios emulator from MAI board.
+
+ The bios emulator in the MAI board can not pass compile
+ and have a lot of crap in it. remove it and will have a
+ clean and small bios emulator in the drivers directory
+ which can be uesed for every board.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 5618332409bb96f4448d1712899369fc80c0b489
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Jul 13 12:14:59 2007 +0800
+
+ Fix some compile issues for MAI board.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 0f460a1ee148b648ee242c3157650287d4296260
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Jul 13 12:14:58 2007 +0800
+
+ Configurations for ATI video card BIOS emulator
+
+ This patch add definition of the BIOS emulator and the ATI framebuffer
+ driver for MPC8641HPCN board.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit ece92f85053b8df613edcf05b26a416cbc3d629c
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Jul 6 08:34:56 2007 +0800
+
+ This is a BIOS emulator, porting from SciTech for u-boot, mainly for
+ ATI video card BIOS. and can be used for x86 code emulation by some
+ modifications.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 5072188acabde3178fac7f5a597150e6e74fd40c
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Jul 6 08:33:33 2007 +0800
+
+ This is a framebuffer driver for ATI video card, can work for PCI9200,
+ X300, X700, X800 ATI video cards.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 5728be389e65fd47f34b33c2596271eb4db751ae
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 6 01:01:49 2007 +0200
+
+ Coding style cleanup. Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8092fef4c29b395958bb649647da7e3775731517
+Author: Martin Krause <Martin.Krause@tqs.de>
+Date: Tue Dec 12 14:26:01 2006 +0100
+
+ Add functions to list of exported functions
+
+ Additionally export the following fuctions (to make trab_config build again):
+ - simple_strtol()
+ - strcmp()
+
+ Also bump the ABI version to reflect this change
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 63cec5814fab5d2b1c86982327433807a5ac0249
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Aug 2 14:09:49 2007 -0500
+
+ Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
+
+ All of the PCI/PCI-Express driver and initialization code that
+ was in the MPC8641HPCN port has now been moved into the common
+ drivers/fsl_pci_init.c. In a subsequent patch, this will be
+ utilized by the 85xx ports as well.
+
+ Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
+
+ Also enable the second PCI-Express controller on 8641
+ by getting its BATS and CFG_ setup right.
+
+ Fixed a u16 vendor compiler warning in AHCI driver too.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a274ca4f6d68830e7c916f897561cff8c4101c38
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Aug 5 22:33:05 2007 +0200
+
+ [FIX] Coding style cleanup
+
+commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Aug 5 16:13:31 2007 +0200
+
+ [FIX] Xilinx Uartlite driver
+ Because PPC405 can use UARTLITE serial interface and
+ Microblaze can use Uart16550 serial interface not only Uartlite.
+
+commit 98889edd50aadf862071eb5664747ad0d568a20e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Aug 5 15:54:53 2007 +0200
+
+ [FIX] Change configuration for XUPV2P Microblaze board
+
+commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Aug 5 15:53:50 2007 +0200
+
+ [PATCH] Added support for Xilinx Emac community driver
+
+commit 86b116b1b1e165ca4840daefed36d2e3b8460173
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Aug 3 12:08:16 2007 +0200
+
+ cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
+
+ Add the ability for modules from the Schindler cm5200 family to use a
+ single U-Boot image:
+ - rename cm1_qp1 to cm5200
+ - add run-time module detection
+ - parametrize SDRAM configuration according to the module we are running on
+
+ Few minor, board-specific fixes included in this patch:
+ - better MAC address handling
+ - updated default environment ('update' command uses +{filesize} now)
+ - improved error messages in the auto-update code
+ - allow booting U-Boot from RAM (CFG_RAMBOOT)
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Aug 3 04:05:25 2007 -0500
+
+ Add Marvell 1149 PHY support to the TSEC
+
+commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 2 21:27:46 2007 +0200
+
+ Coding style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 63e22764d2f8653f68888c667eb65b3996b52680
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 2 10:11:18 2007 +0200
+
+ Minor cleanup of <board>_nand build rules.
+
+commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Aug 2 08:33:56 2007 +0200
+
+ ppc4xx: Code cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c92409812206ac67a7fa7aae298539a9c3804a46
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Jul 31 18:51:48 2007 +0200
+
+ [ppc440SPe] Graceful recovery from machine check during PCIe configuration
+
+ During config transactions on the PCIe bus an attempt to scan for a
+ non-existent device can lead to a machine check exception with certain
+ peripheral devices. In order to avoid crashing in such scenarios the
+ instrumented versions of the config cycle read routines are introduced, so
+ the exceptions fixups framework can gracefully recover.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit dec99558b9ea75a37940d07f41a3565a50b54ad1
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Tue Jul 31 18:19:54 2007 +0200
+
+ [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
+
+ This brings back separate settings for PCIe bus numbers depending on chip
+ revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
+ commit. 440SPe rev. A does NOT work properly with the same settings as for
+ the rev. B (no devices are seen on the bus during enumeration).
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 2 00:48:45 2007 +0200
+
+ Fix build errors and warnings / code cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
+Author: Eugene OBrien <eugene.obrien@advantechamt.com>
+Date: Tue Jul 31 10:24:56 2007 +0200
+
+ ppc4xx: Update AMCC Bamboo 440EP support
+
+ Changed storage type of cfg_simulate_spd_eeprom to const
+ Changed storage type of gpio_tab to stack storage
+ (Cannot access global data declarations in .bss until afer code relocation)
+
+ Improved SDRAM tests to catch problems where data is not uniquely addressable
+ (e.g. incorrectly programmed SDRAM row or columns)
+
+ Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
+ Fixed AM29LV320DT (OpCode Flash) sector map
+
+ Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 31 08:37:01 2007 +0200
+
+ ppc4xx: Update 440EPx lwmon5 board support
+
+ - Clear ECC status regs after ECC POST test
+ - Set dcbz for ECC generation with caches enabled as default
+ - Code cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 30 11:04:57 2007 +0200
+
+ ppc4xx: Only print ECC related info when the error bis are set
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e36220a4baf1f188ba60f17e9d0f043069b1362a
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jul 27 16:44:31 2007 +0200
+
+ new FPGA image for PLU405 board
+
+ new FPGA image for PLU405 board with improved CompactFlash timing
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jul 27 14:43:59 2007 +0200
+
+ [ADS5121] Support for the ADS5121 board
+
+ The following MPC5121e subsystems are supported:
+
+ - low-level CPU init
+ - NOR Boot Flash (common CFI driver)
+ - DDR SDRAM
+ - FEC
+ - I2C
+ - Watchdog
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+ Signed-off-by: Jan Wrobel <wrr@semihalf.com>
+
+commit 1863cfb7b100ba0ee3401799457a01dc058745f8
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jul 27 14:22:04 2007 +0200
+
+ [PPC] Remove unused MSR_USER definition
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit d4024bb72dd81695ec099b2199eda0d27c623e62
+Author: John Otken <john@softadvances.com>
+Date: Thu Jul 26 17:49:11 2007 +0200
+
+ ppc4xx: Add support for AMCC 405EP Taihu board
+
+ Signed-off-by: John Otken <john@softadvances.com>
+
+commit b66091de6c7390620312c2501db23d8391e7cabb
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Jul 26 15:08:01 2007 +0200
+
+ ppc4xx: lwmon5: Update Lime initialization
+
+ Change Lime SDRAM initialization to now support 100MHz and
+ 133MHz (if enabled). Also the framebuffer is initialized to
+ display a blue rectangle with a white border.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9f24a808f17fc0f37b7fb4805f734741335caecc
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 24 09:52:52 2007 +0200
+
+ ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
+
+ The used Intel NOR FLASH chips have internally two dies, and are now
+ treated as two seperate chips.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit aedf5bde179ecfbd0a96130d18996a96518b785f
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 24 07:20:09 2007 +0200
+
+ ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
+
+ As suggested by Hakan Eryigit, here an updated setup for the lwmon5
+ interrupt controller.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a71d96eac8130b53a91f93cd10c70fca0db18d52
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 20 15:03:44 2007 +0200
+
+ ppc4xx: Fix bug with default GPIO output value
+
+ As spotted by Matthias Fuchs, the default output values for all GPIO1
+ outputs were not setup correctly. This patch fixes this issue.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 531e3e8b831f357056448fa573137d5fb37000fd
+Author: Pavel Kolesnikov <concord@emcraft.com>
+Date: Fri Jul 20 15:03:03 2007 +0200
+
+ POST: Add ECC POST for the lwmon5 board
+
+ This patch adds ECC Post test for the Lwmon5 board based
+ on PPC440EPx to U-Boot.
+
+ Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
+ Acked-by: Yuri Tikhonov <yur@emcraft.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit cc3023b9f95d7ac959a764471a65001062aecf41
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Thu Jul 19 17:12:28 2007 +0200
+
+ Fix breakage of 8xx boards from recent commit.
+
+ This patch fixes the negative consequences for 8xx of the recent
+ "ppc4xx: Clean up 440 exceptions handling" commit.
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 16 13:11:12 2007 +0200
+
+ Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 16 10:02:12 2007 +0200
+
+ ppc4xx: Code cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 16 10:01:38 2007 +0200
+
+ ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 16 10:00:43 2007 +0200
+
+ ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
+
+ The new boardspecific DDR2 controller configuration is used for the Yucca
+ board. Now the Yucca board with 440SPe Rev. A chips is also supported.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 16 09:57:00 2007 +0200
+
+ ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
+
+ The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
+ support non default, boardspecific DDR(2) controller configuration.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5743a9207a370b90f09b20ebd61167c806b937f3
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 16 08:53:51 2007 +0200
+
+ ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
+
+ The new function remove_tlb() can be used to remove the TLB's used to
+ map a specific memory region. This is especially useful for the DDR(2)
+ setup routines which configure the SDRAM area temporarily as a cached
+ area (for speedup on auto-calibration and ECC generation) and later
+ need this area uncached for normal usage.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jul 16 00:31:07 2007 +0200
+
+ [PATCH] Support for Xilinx EmacLite controller
+
+commit 3a6cab844cf74f76639d795e0be8717e02c86af7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 14 22:51:02 2007 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Jul 14 13:11:28 2007 +0200
+
+ [FIX] support for simply measuring time
+
+commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Jul 14 12:41:23 2007 +0200
+
+ [FS] Added support for ROMFS
+
+commit 011595307731a7a67a7445d107c279d031e8ab97
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Sat Jul 14 01:06:58 2007 +0200
+
+ [PCS440EP] - fix compile error, if BUILD_DIR is used
+
+commit 5a2f1098d81ad58b309e5e558d0492643166a799
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Jul 14 00:18:48 2007 +0200
+
+ [PATCH] Support time without timer
+
+commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 13 21:43:55 2007 +0200
+
+ [PATCH] Remove problem with disabled BARREL SHIFTER
+
+commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 13 21:41:44 2007 +0200
+
+ [FIX] correct help for rspr
+
+commit fad63407154f46246ce80d53a9c669a44362ac67
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Fri Jul 13 09:54:17 2007 +0200
+
+ make show_boot_progress () weak.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 907902472391b6ca1876ec300687562ecaf459b1
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Fri Jul 13 08:26:05 2007 +0200
+
+ [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
+ - fix compile error, if BUILD_DIR is used
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 12 16:32:08 2007 +0200
+
+ ppc4xx: Change receive buffer handling in the 4xx emac driver
+
+ This change fixes a bug in the receive buffer handling, that
+ could lead to problems upon high network traffic (broadcasts...).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 12 01:45:34 2007 +0200
+
+ Update CHANGELOG, minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Jun 8 16:41:18 2007 -0500
+
+ Remove erroneous errata code from Marvel 88E1111S driver
+
+ The Marvel 88E1111S driver for the TSEC was copied from the
+ 88E1101 driver, and included a fix for an erratum which does not
+ exist on that part. Now it is removed
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Jun 5 16:38:44 2007 -0500
+
+ From: eran liberty <eran.liberty@gmail.com>
+
+ adds the reset register to 85xx immap
+
+ Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu May 10 17:50:01 2007 -0500
+
+ Polished the 85xx ADS config files
+
+ Made the boot commands use device trees by default.
+ Also moved the ramdisk to 1000000 (I think the previous address
+ was getting overridden during boot).
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed May 9 11:03:32 2007 -0500
+
+ 8544ds: Fix Makefile after moving pixis to board/freescale.
+
+ The OBJTREE != SRCTREE build scenario was broken.
+ This fixes it.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed May 9 00:54:20 2007 -0500
+
+ tsec: Fix PHY code to match first driver
+
+ Jarrold Wen noticed that the generic PHY code always matches
+ under the current implementation. Change it so the first match
+ wins, and *only* unknown PHYs trigger the generic driver
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit ccc091aac61a38cd998d575d92f7232e256d6312
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue May 8 17:27:43 2007 -0500
+
+ Add support for CPM device tree configuration to 8560 ADS
+
+ * Adds code to modify CPM frequencies
+ * Cleans up the config file to #define TSEC and (for now) #undef FCC
+ * Adds the MII command for all 8560 ADS configurations
+ * Updates config file to provide convenience commands for booting
+ with a device tree
+
+ Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue May 8 17:23:02 2007 -0500
+
+ Fix Marvell 88e1145 PHY init code
+
+ Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
+ where the reset was being done after the errata code instead of
+ before.
+
+ Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 5dc210dec5bace98a50b6ba905347890091a9bb0
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Jul 11 14:52:16 2007 -0500
+
+ Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Jul 11 14:52:08 2007 -0500
+
+ pciauto setup bridge
+
+ The P2P bridge bus numbers programmed into the device are relative to
+ hose->first_busno.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 571f49fa717004ca4268b4e24057efc7bf9f987b
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Jul 11 14:52:01 2007 -0500
+
+ Support PCIe extended config registers
+
+ FSL PCIe block has extended cfg registers in the 100 and 400 range.
+ For example, to read the LTSSM register: pci display <busn>.0 404 1
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit ba5feb12581bb2912ce301e4866b71f846e9fc07
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Jul 11 14:51:48 2007 -0500
+
+ Minor improvements to drivers/pci_auto.c
+
+ - Make pciauto_{pre,post}scan_setup_bridge non-static
+ - Added physical address display in debug messages.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 40e81addab7bb74d20ddf681ce9babc880a828ee
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Jul 11 14:51:35 2007 -0500
+
+ Start pci hose scan from hose->current_busno.
+
+ Ensure hose->current_busno is not less than first_busno. This fixes
+ broken board code which leaves current_busno=0 when first_busno is
+ greater than 0 for the cases with multiple controllers.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 3865b1fb7843a08ad49a6319a36415752276ff48
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 11 12:13:53 2007 +0200
+
+ Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fa1df308926a6f70e3504c57514ef27ac31fd13a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Jul 11 20:11:07 2007 +0200
+
+ CM1.QP1: Support for the Schindler CM1.QP1 board.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Wed Jul 11 18:39:11 2007 +0200
+
+ [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
+ - now the Flash ST M29W040B is supported (not tested)
+ - fix the "led" command
+ - fix compile error, if BUILD_DIR is used
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
+Author: Stefan Roese <sr@denx.de>
+Date: Sun Jul 8 13:44:27 2007 +0200
+
+ Fix malloc problem introduced with the relocation fixup for the PPC platform
+
+ The relocation fixup didn't handle the malloc pointer initialization
+ correctly. This patch fixes this problem. Tested successfully on 4xx.
+ The relocation fixup patches for 4xx will follow soon.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0dca874db62718e41253659e60f3a1de7eb418ce
+Author: TsiChung <tcliew@Goku.(none)>
+Date: Tue Jul 10 15:45:43 2007 -0500
+
+ Cache update and added CFG_UNIFY_CACHE
+
+ Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
+
+ Signed-off-by: TsiChung <tcliew@Goku.(none)>
+
+commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:36:16 2007 -0500
+
+ Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
+
+ Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:31:25 2007 -0500
+
+ Update header files
+
+ Include immap.h and renamed mcfrtc.h to rtc.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 2870e98ac8e5553e9187b12a47e5f46babb53990
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:29:21 2007 -0500
+
+ Add mcffec_initialize()
+
+ Added mcffec_initialize() in eth_initialize()
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:27:40 2007 -0500
+
+ Update header file and clean up
+
+ Include immap.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 0cee9c66318602c856a899ae5fa7579ccba6443a
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:23:15 2007 -0500
+
+ New uart structure and defines
+
+ Seperated from mcfuart.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit a90e79de8d99e9c9d69d60bfff9f24c337165900
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:22:31 2007 -0500
+
+ New timer structure and defines
+
+ Seperated from mcftimer.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit e04acb2eba4782489417240eff76e20e176aec10
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:21:09 2007 -0500
+
+ Rename mcfrtc to rtc
+
+ Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:17:36 2007 -0500
+
+ Rename mcfserial.c. Update include header
+
+ Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:13:58 2007 -0500
+
+ Header file update, clean up and cache handling
+
+ Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:10:40 2007 -0500
+
+ Create interrupts.c and modify Makefile
+
+ interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit ddd104f1ed655eda50c06ba636237a83ed943f34
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:06:55 2007 -0500
+
+ Enable Icache
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit b9bf3de377b2bae70c983c9b97feae914999e735
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:05:31 2007 -0500
+
+ Update header file and some clean up
+
+ Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 84a015b52ec820a5ae173717d78516de731c89c2
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:03:28 2007 -0500
+
+ Update header file and enable icache
+
+ Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:01:22 2007 -0500
+
+ Update header file and removed interrupt_init()
+
+ Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 3b635492c95bd0d6e08f93f699821cba1f602a64
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:57:46 2007 -0500
+
+ Update for flash.o and mii.o
+
+ Removed flash.o and added mii.o
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit c5ded275d839e4ff79f41718d50a835d989f57bc
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:56:19 2007 -0500
+
+ MII functions calls.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 427c814104560e29bda14955c67703245aaaa5b4
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:54:42 2007 -0500
+
+ Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
+
+ The removed MII routines will be placed in mii.c.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:51:05 2007 -0500
+
+ Duplicate code
+
+ There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 2744354a8437b8f78db178e30660215688bff570
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:46:38 2007 -0500
+
+ Seperate old structure defines and new structure defines
+
+ Removed new uart structure and defines to uart.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:45:01 2007 -0500
+
+ Seperate old structure defines and new structure defines
+
+ New timer structure and defines will move to new timer.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:42:23 2007 -0500
+
+ Clean up
+
+ Removed whitespace
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:41:24 2007 -0500
+
+ Clean up
+
+ Replaced whitespace with tabs
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:39:07 2007 -0500
+
+ Create new header file and move peripherals base address from configs file to new header file.
+
+ Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:24:58 2007 -0500
+
+ Revert file mode
+
+ Changed MAKEALL file mode to executable, removed executable file mode from Makefile
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 11:19:50 2007 -0500
+
+ disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
+
+ Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+ Those always evaluated TRUE, and thus were always compiled
+ even when IDE really wasn't defined/wanted.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 11:13:21 2007 -0500
+
+ drivers/: Remove lingering references to CFG_CMD_* symbols.
+
+ Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+ Those always evaluated TRUE, and thus were always compiled
+ even when IDE really wasn't defined/wanted.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f40a7f3e3888b42a43674b099e5470022c8c544c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 11:07:56 2007 -0500
+
+ fs/: Remove lingering references to CFG_CMD_* symbols.
+
+ Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+ Those always evaluated TRUE, and thus were always compiled
+ even when IDE really wasn't defined/wanted.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 11:05:02 2007 -0500
+
+ net/: Remove lingering references to CFG_CMD_* symbols.
+
+ Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+ Those always evaluated TRUE, and thus were always compiled
+ even when IDE really wasn't defined/wanted.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 902531788376046da212afd1661cffb62f3daa1c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 11:02:44 2007 -0500
+
+ common/: Remove lingering references to CFG_CMD_* symbols.
+
+ Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+ Those always evaluated TRUE, and thus were always compiled
+ even when IDE really wasn't defined/wanted.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit d39b57415838c73fb0a37eca84de3c68ba990586
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 10:48:22 2007 -0500
+
+ board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
+
+ Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+ Those always evaluated TRUE, and thus were always compiled
+ even when IDE really wasn't defined/wanted.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 77a318545d57aefa844752465b94c7e09a3f26d0
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 10:39:10 2007 -0500
+
+ board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
+
+ Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+ Those always evaluated TRUE, and thus were always compiled
+ even when IDE really wasn't defined/wanted.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 10:27:39 2007 -0500
+
+ cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 079a136c3588814784561d6e4856970ee82d6e2a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 10:12:10 2007 -0500
+
+ include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
+
+ Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+ used to be included but CONFIG_BOOTP_MASK was not defined.
+
+ Remove lingering references to CFG_CMD_* symbols.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 09:38:02 2007 -0500
+
+ include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
+
+ Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+ used to be included but CONFIG_BOOTP_MASK was not defined.
+
+ Remove lingering references to CFG_CMD_* symbols.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 09:29:01 2007 -0500
+
+ include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
+
+ Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+ used to be included but CONFIG_BOOTP_MASK was not defined.
+
+ Remove lingering references to CFG_CMD_* symbols.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 09:22:23 2007 -0500
+
+ include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
+
+ Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+ used to be included but CONFIG_BOOTP_MASK was not defined.
+
+ Remove lingering references to CFG_CMD_* symbols.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 09:10:49 2007 -0500
+
+ include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
+
+ Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+ used to be included but CONFIG_BOOTP_MASK was not defined.
+
+ Remove lingering references to CFG_CMD_* symbols.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 09:02:57 2007 -0500
+
+ include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
+
+ Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+ used to be included but CONFIG_BOOTP_MASK was not defined.
+
+ Remove lingering references to CFG_CMD_* symbols.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 22:08:34 2007 -0500
+
+ Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
+
+ All of the choices for CONFIG_BOOTP_ are now documented in
+ the README file. You must now individually select exactly
+ the set that you want using a series of
+ #define CONFIG_BOOTP_<x>
+ statements in the board port config files now.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit d3b8c1a743dcd31625c99e6a44590f207eb00028
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 21:57:31 2007 -0500
+
+ include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2fd90ce575b02d189cbf443c85309bcd001aa393
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 21:48:26 2007 -0500
+
+ include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 37d4bb70586659dedef1658ce1bed071be098aec
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 21:38:02 2007 -0500
+
+ include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 18225e8dd1950bd6dbf35011e436db7f474c187d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 21:31:24 2007 -0500
+
+ include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 21:24:19 2007 -0500
+
+ include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 21:16:53 2007 -0500
+
+ include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 19:12:30 2007 -0500
+
+ Retire CONFIG_COMMANDS finally.
+ Strip old CFG_CMD_* symbols out.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b5501f7d720fed99ab0b42c83f5dea52868ce007
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 19:10:03 2007 -0500
+
+ Update README.* to reference new CONFIG_CMD_* names now.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 19:06:00 2007 -0500
+
+ cpu/m*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:57:22 2007 -0500
+
+ cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ab3abcbabd840928fb1eb5122118ca466b5e5013
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:45:16 2007 -0500
+
+ board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:38:39 2007 -0500
+
+ board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit c508a4cefd8a953fc64957650506a035e6e3d9d1
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:31:28 2007 -0500
+
+ board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:24:55 2007 -0500
+
+ board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit fcec2eb93e126400009729328e797f12bc94f1fd
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:19:09 2007 -0500
+
+ board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a593814f2be0c9cdc3133cd550b167b8a988328f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:10:50 2007 -0500
+
+ rtc/: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 67350568f9d46e66c21829f3513b3db0caeb948b
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:05:38 2007 -0500
+
+ lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7def6b34f910f08d7ef0a14646da067719237ca2
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:02:11 2007 -0500
+
+ lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 17:56:50 2007 -0500
+
+ fs/: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit c91898bbc505aff3e12a807af88e76da18efb7ee
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 17:46:09 2007 -0500
+
+ tools/: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 17:45:14 2007 -0500
+
+ net/: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 17:39:42 2007 -0500
+
+ drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 17:30:01 2007 -0500
+
+ drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 17:22:37 2007 -0500
+
+ disk/: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 639221c76c88215bd55af83ad174fc30d1940f8f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 17:15:49 2007 -0500
+
+ include/: Remove obsolete references to CONFIG_COMMANDS
+ Mostly removed from comments here.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 10 00:01:28 2007 +0200
+
+ Coding style cleanup; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c8603cfbd4573379a6076c9c208545ba2bbf019a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 9 11:00:24 2007 +0200
+
+ Small coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Jul 9 10:10:08 2007 +0200
+
+ Migrate esd 405EP boards to new NAND subsystem
+
+ Remove unused CFG_NAND_LEGACY define
+
+ These boards to not have NAND.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Jul 9 10:10:06 2007 +0200
+
+ Migrate esd 405EP boards to new NAND subsystem
+
+ Migrate esd 405EP boards to new NAND subsystem
+
+ -cleanup
+ -use correct io accessors (in/out_be32())
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit e09f7ab5749c345f924da272bea0521a73af5b11
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Jul 9 10:10:04 2007 +0200
+
+ Migrate esd 405EP boards to new NAND subsystem
+
+ This patch prepares the migration from the legacy NAND driver
+ to U-Boot's new NAND subsystem for esd boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit c3517f919d0f61650cf3027fd4faf0f631142f6c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 18:10:08 2007 -0500
+
+ common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 18:05:39 2007 -0500
+
+ common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit c76fe47425afc7d5d670ff0539823c85d65d9c42
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 18:02:23 2007 -0500
+
+ common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit baa26db4113679b80970ff447d91cc10217742a6
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 17:51:39 2007 -0500
+
+ common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 17:02:01 2007 -0500
+
+ Clear up confusion over the CMD_POST and POST_DIAG mess.
+
+ For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
+ when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
+ Clear this mess up some.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b3631487105a57ab7cbadfc26efbaf9676275018
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 15:45:08 2007 -0500
+
+ Remove references to the old cmd_confdefs.h include file.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 15:42:59 2007 -0500
+
+ include/configs: Catch some CONFIG_CMD_* conversion stragglers.
+
+ Use new CONFIG_CMD_* in lwmon5.h board config file.
+ Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a5562901661bd428f7e5feb333f796372cb81019
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 15:31:57 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 15:02:44 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various S* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 15:12:40 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various R* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 14:55:07 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 14:49:44 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various P* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 14:21:43 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 14:14:17 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various M* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 348f258f24253433e4a2302a0bbceb6740a67246
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 13:46:18 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 10:09:35 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various H* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 60a0876b5106b34220e459c208bbf648073306c0
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sat Jul 7 21:04:26 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit dcaa71562826a2466e894c868d132509dcda8444
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sat Jul 7 20:56:05 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various E* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 3c3227f3c737502311b25b72084573901cbbf17d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sat Jul 7 20:40:43 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various D* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Jul 5 19:52:35 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various C* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Jul 5 19:32:07 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various B* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 498ff9a228485bd4b9f23d066bada268f9add1dd
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Jul 5 19:13:52 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various A* named board config files.
+
+ Since ADS860.h includes "board/fads/fads.h" with ramifications
+ on the CONFIG_COMMAND treatment, it too has to be adjusted to
+ exclude already configured commands in this same commit.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 10e038932f22ee80ebd53de312531e70e6590a2f
+Author: Thomas Knobloch <knobloch@siemens.com>
+Date: Fri Jul 6 14:58:39 2007 +0200
+
+ [NAND] Bad block skipping for command nboot
+
+ The old implementation of command nboot does not support reading the image from
+ NAND flash with skipping of bad blocks. The patch implements a new version of
+ the nboot command: by calling nboot.jffs2 from the u-boot command line the
+ command will load the image from NAND flash with respect to bad blocks (by using
+ nand_read_opts()). This is similar to e.g. the NAND read command: "nand
+ read.jffs2 ...".
+
+ Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 6 12:26:51 2007 +0200
+
+ ppc4xx: Update lwmon5 default environment
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5d187430a055d62f17ca84d75e7245439d1f7e75
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 6 11:48:24 2007 +0200
+
+ ppc4xx: Update lwmon5 board
+
+ Add unlock=yes environment variable to default variables to unlock
+ the CFI flash by default.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 6 09:45:47 2007 +0200
+
+ Fix problem with get/setdcr commands introduced by cfg patches
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 6 02:50:19 2007 +0200
+
+ Code cleanup and default config update for STC GP3 SSA board.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e4dbe1b215f5c6c462e76909d240bd96472b84de
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 5 17:56:27 2007 +0200
+
+ Fixing some typos etc. introduced mainly by cfg patches.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 5 11:12:16 2007 +0200
+
+ Minor coding style cleanup. Update CHANGELOG.
+
+commit dca3b3d6d6396b67e5e84af53452164923c73443
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:46 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:38 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:30 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various s* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:23 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 26a34560d56a9df5bc2ae23525d9229736134757
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:17 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various p* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a5cb23092a7d31490a33d4ec871468b63babfa3c
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:13 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various o* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:07 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various n* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:01 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various m* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:32:57 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various l* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:32:51 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:32:32 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various i* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:32:25 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various h* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:32:19 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various g* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:32:10 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various e* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:32:03 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various d* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:31:56 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various c* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:31:49 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various b* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 0b361c916617aff79e647b40f0e43361e0bbaccf
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:31:42 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various a* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b730cda82e362df6a22f4c59c0a9b97e885b1014
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:31:35 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit d794cfefead5fc177cf4f41164e80382e9c9484a
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:31:15 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:31:07 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in STx board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:30:58 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in sbc* board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2694690e285acaa34922f55f4b5ae030da60c55a
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:30:50 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in TQM board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1cc4c458329765b58e584a19821e796b3c10e976
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:30:28 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in 82xx board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:30:06 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in 83xx board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b44896215a09c60fa40cae906f7ed207bbc2c492
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Thu Jul 5 08:17:37 2007 +0200
+
+ Merged POST framework with the current TOT.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit b24629fa377214d63bb40d1360e354b6d3e4af56
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jun 13 13:23:15 2007 -0500
+
+ mpc86xx: Remove old CFG_CMD_* references.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jun 13 13:22:54 2007 -0500
+
+ Add MPC8568MDS to MAKEALL 85xx target.
+
+ It was missing from the original port submission.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jun 13 13:22:08 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in 85xx board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 56b304ac2091689506088a9ae67f63fd6300cf16
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jun 13 13:21:37 2007 -0500
+
+ Fix #if typo in CONFIG_CMD_* changes.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f780b83316d9af1f61d71cc88b1917b387b9b995
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Wed Jun 27 18:11:38 2007 +0200
+
+ resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
+
+commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 4 10:06:30 2007 +0200
+
+ ppc4xx: Update lwmon5 board
+
+ - Add optional ECC generation routine to preserve existing
+ RAM values. This is needed for the Linux log-buffer support
+ - Add optional DDR2 setup with CL=4
+ - GPIO50 not used anymore
+ - Lime register setup added
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6810a34677dbc446334f5e451f1682426dd33b49
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:17:28 2007 -0600
+
+ Fix Makefile to use $(MKCONFIG) macro for all board ports
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:17:28 2007 -0600
+
+ Fix Makefile to use $(MKCONFIG) macro for all board ports
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 057004f4a4863554d56cc56268bfa7c7d9738e27
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:49 2007 -0600
+
+ Correct fixup relocation for mpc83xx
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:44 2007 -0600
+
+ Correct fixup relocation for mpc8260
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f3a52fe05923935db86985daf9438e2f70ac39aa
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:39 2007 -0600
+
+ Correct fixup relocation for mpc824x
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:34 2007 -0600
+
+ Correct fixup relocation for mpc8220
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:29 2007 -0600
+
+ Correct fixup relocation for MPC5xxx
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 3649cd99ba815b6601868735765602f00ef3692b
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:24 2007 -0600
+
+ Correct relocation fixup for mpc5xx
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:19 2007 -0600
+
+ Don't set gd->reloc_off if relocation of .fixup works correctly
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:14 2007 -0600
+
+ Remove obsolete mpc83xx linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:09 2007 -0600
+
+ Consolidate mpc8260 linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:04 2007 -0600
+
+ Remove obsolete mpc824x linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:59 2007 -0600
+
+ Remove obsolete mpc824x linker scripts (3 of 4)
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit a71c084f3ac7fedf144537db2b2da47323068833
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:53 2007 -0600
+
+ Remove obsolete mpc824x linker scripts (2 of 4)
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f670a15468d1365241d40022b9408e1004181f5e
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:48 2007 -0600
+
+ Remove obsolete mpc824x linker scripts (1 of 4)
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 09555bd45a04c0e54f172528d21bc18896550d28
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:43 2007 -0600
+
+ Remove obsolete mpc8220 linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5efb992f046e51225c93d52f80fecbe433abd789
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:38 2007 -0600
+
+ Remove obsolete mpc5xxx linker scripts (3 of 3)
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 07c13dfef65b31647e69d8b61daa1eec598add1a
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:33 2007 -0600
+
+ Remove obsolete mpc5xxx linker scripts (2 of 3)
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:28 2007 -0600
+
+ Remove obsolete mpc5xxx linker scripts (1 of 3)
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit b7d8e05f8675249b5f208aa73babeed384a4519d
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:23 2007 -0600
+
+ Remove obsolete mpc5xx linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:18 2007 -0600
+
+ Consolidate mpc83xx linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:13 2007 -0600
+
+ Consolidate mpc8260 linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:08 2007 -0600
+
+ Consolidate mpc824x linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 9c757b789a59a855db57b448dd825329c4e9c4a0
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:03 2007 -0600
+
+ Consolidate mpc8220 linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit d181c9a15cd41863fe24840d17848429f27d3c8c
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:32:58 2007 -0600
+
+ Consolidate mpc5xxx linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 287ac924adb7291bebe5086652a362a30ab28b13
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:32:53 2007 -0600
+
+ Consolidate mpc5xx linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jul 4 00:43:53 2007 +0200
+
+ Fix a few file permission problems.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jul 4 00:38:38 2007 +0200
+
+ Minor coding style cleanup. Rebuild CHANGELOG file.
+
+commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:44 2007 -0500
+
+ configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 602ad3b33d9ceef83dbab46be68646d645d637ee
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:39 2007 -0500
+
+ README: Rewrite command line config to use CONFIG_CMD_* names.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 72a074cec68e5bad60d63206c050974e08afd804
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:34 2007 -0500
+
+ include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:28 2007 -0500
+
+ tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9107ebe0d352420895ab69b715697bdebc8caf50
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:23 2007 -0500
+
+ board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5e378003d592ea828ec69d6defcd4de79096dd5c
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:19 2007 -0500
+
+ board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 737184114ec9c9e0ab94d6713536126073bd2472
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:15 2007 -0500
+
+ cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f48070fe5fe440dfb5ee5268c920de70e48ea327
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:08 2007 -0500
+
+ cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:03 2007 -0500
+
+ lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:02:58 2007 -0500
+
+ lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 98b79003c21c2578206003256de4e781d6b36ca8
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:02:53 2007 -0500
+
+ rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6e2115acb6a892d53a6881bf253ae41d3df39156
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:02:49 2007 -0500
+
+ net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 45cdb9b72c94655c7308b464a2666057c0b286e0
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:02:34 2007 -0500
+
+ disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:02:20 2007 -0500
+
+ fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit d5be43de93ff905c465e509d45a3164ef48d26e7
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:02:10 2007 -0500
+
+ drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b453960d4fdb87b3970d96119b90df2ed024fc4a
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:02:05 2007 -0500
+
+ common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:01:54 2007 -0500
+
+ common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a76adc8142c1d956385a109e0b70f9319ede4d66
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:01:43 2007 -0500
+
+ common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:01:34 2007 -0500
+
+ Introduce initial versions of new Command Config files.
+
+ Derive three new files from cmd_confdefs.h:
+ config_bootp.h - Has BOOTP related config options, not commands
+ config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
+ config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
+
+ For now, include "config_bootp.h" for compatability until all
+ users of it directly include it properly.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1f2a05898658900dc5717761e27abf2052e67e13
+Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
+Date: Sat Jun 30 18:50:48 2007 +0200
+
+ Fix S-ATA support.
+
+ Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
+
+commit a5d71e290f3673269be8eefb4ec44f53412f9461
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Mon Jun 25 19:11:37 2007 +0200
+
+ [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
+Author: Niklaus Giger <niklaus.giger@nestal.com>
+Date: Mon Jun 25 17:03:13 2007 +0200
+
+ ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
+
+ This patch prints the DDR status registers upon machine check
+ interrupt on the 440EPx/GRx. This can be useful especially when
+ ECC support is enabled.
+
+ I added some small changes to the original patch from Niklaus to
+ make it compile clean.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 807018fb7faceb429ce0cb47baa2073746b33a4e
+Author: Niklaus Giger <niklaus.giger@nestal.com>
+Date: Mon Jun 25 16:50:55 2007 +0200
+
+ ppc4xx: Fix O=buildir builds
+
+ This patch fixes the problem to assemble cpu/ppc4xx/start.S
+ experienced last week where building failed having specified
+ O=../build.sequoia.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
+
+commit 466fff1a7bb5fe764a06450626f6098219f446b8
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 25 15:57:39 2007 +0200
+
+ ppc4xx: Add pci_pre_init() for 405 boards
+
+ This patch removes the CFG_PCI_PRE_INIT option completely, since
+ it's not needed anymore with the patch from Matthias Fuchs with
+ the "weak" pci_pre_init() implementation.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6f35c53166213c24a5a0e2390ed861136ff73870
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sun Jun 24 17:41:21 2007 +0200
+
+ ppc4xx: Maintenance patch for esd's CPCI405 derivats
+
+ -add pci_pre_init() for pci interrupt fixup code
+ -disable phy sleep mode via reset_phy() function
+ -use correct io accessors
+ -cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sun Jun 24 17:23:41 2007 +0200
+
+ ppc4xx: Add pci_pre_init() for 405 boards
+
+ This patch adds support for calling a plattform dependant
+ pci_pre_init() function for 405 boards. This can be used to
+ move the current pci_405gp_fixup_irq() function into the
+ board code.
+
+ This patch also makes the CFG_PCI_PRE_INIT define obsolete.
+ A default function with 'weak' attribute is used when
+ a board specific pci_pre_init() is not implemented.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jun 22 23:59:00 2007 +0200
+
+ Coding stylke cleanup; rebuild CHANGELOG
+
+commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
+Author: Igor Lisitsin <igor@emcraft.com>
+Date: Wed Apr 18 14:55:19 2007 +0400
+
+ Adapt log buffer code to support Linux 2.6
+
+ A new environment variable, "logversion", selects the log buffer
+ behaviour. If it is not set or set to a value other than 2, then the
+ old, Linux 2.4.4, behaviour is selected.
+
+ Signed-off-by: Igor Lisitsin <igor@emcraft.com>
+ --
+
+commit a11e06965ec91270c51853407ff1261d3c740386
+Author: Igor Lisitsin <igor@emcraft.com>
+Date: Wed Mar 28 19:06:19 2007 +0400
+
+ Extend POST support for PPC440
+
+ Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
+
+ Signed-off-by: Igor Lisitsin <igor@emcraft.com>
+ --
+
+commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Fri Jun 22 19:11:54 2007 +0200
+
+ [PCS440EP] upgrade the PCS440EP board:
+ - Show on the Status LEDs, some States of the board.
+ - Get the MAC addresses from the EEProm
+ - use PREBOOT
+ - use the CF on the board.
+ - check the U-Boot image in the Flash with a SHA1
+ checksum.
+ - use dynamic TLB entries generation for the SDRAM
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3a1f5c81b0b9557817a789bece839905581c2205
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 22 16:58:40 2007 +0200
+
+ ppc4xx: Fix problem with extended program_tlb() funtion
+
+ The recently extended program_tlb() function had a problem when
+ multiple TLB's had to be setup (for example with 512MB of SDRAM). The
+ virtual address was not incremented. This patch fixes this issue
+ and is tested on Katmai with 512MB SDRAM.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jun 22 14:58:04 2007 +0200
+
+ [ppc] Fix build breakage for all non-4xx PowerPC variants.
+
+ - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
+ - minor 4xx cleanup
+
+commit d677b32855f577ae2690dcd64a172cdd706e0ffc
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Jun 22 10:34:12 2007 +0200
+
+ [patch] add nand_init() prototype to nand.h
+
+ since nand_init() is expected to be called by other parts of u-boot, there
+ should be a prototype for it in nand.h
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jun 20 18:14:24 2007 +0200
+
+ Coding style cleanup. Refresh CHANGELOG.
+
commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
Author: Stefan Roese <sr@denx.de>
Date: Tue Jun 19 17:22:44 2007 +0200
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Jun 18 13:50:13 2007 -0500
+
+ Added M5329AFEE and M5329BFEE Platforms
+
+ Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
+ drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
+ include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
+ rtc/mcfrtc.c
+
+ Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
+ common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
+ include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
+ include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
+ include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
+ lib_m68k/time.c, net/eth.c and rtc/Makefile
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Jun 17 19:04:11 2007 +0200
+
+ [fix] email reparation
+
+commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Jun 17 19:03:21 2007 +0200
+
+ [FIX] fix microblaze file permitission
+
commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
Author: Stefan Roese <sr@denx.de>
Date: Fri Jun 15 11:33:41 2007 +0200
Signed-off-by: Detlev Zundel <dzu@denx.de>
+commit 9b7464a2c88614e1061f509c48930a3d240d1a35
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Mon Jun 11 15:14:24 2007 +0200
+
+ USB: This patch fix readl in ohci swap reg access.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Fri Jun 8 14:52:22 2007 +0200
Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
+commit f539edc076cfe52bff919dd512ba8d7af0e22092
+Author: Vadim Bendebury <vbendeb@google.com>
+Date: Thu May 24 15:52:25 2007 -0700
+
+ cosmetic changes to bcm570x driver
+
+ This is a cosmetic only changes submission.
+ It affects files relevant to bcm570x driver.
+ the commands used to generate this change was
+
+ cd drivers
+ Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
+
+ The BMW target (the only one using this chip so far) builds cleanly, the
+ `before and after' generated object files for drivers/bcm570x.c and
+ drivers/tigon3.o are identical as reported by objdump -d
+
+ Signed-off-by: Vadim Bendebury <vbendeb@google.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
Author: Wolfgang Denk <wd@denx.de>
Date: Wed Jun 6 16:26:56 2007 +0200
Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Jun 6 11:49:44 2007 +0200
+
+ TRAB, USB: update trab board configuration for use of generic ohci driver
+
+commit dace45acd1c1357daa9322099d07c9a9e08b0024
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Jun 6 11:49:43 2007 +0200
+
+ USB: ohci fixes and cleanup for ppc4xx and yosemite board.
+
+commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Jun 6 11:49:43 2007 +0200
+
+ USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
+
+commit fc43be478f2aa37ce38acd85355038866e4162af
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Jun 6 11:49:35 2007 +0200
+
+ USB/OHCI: endianness cleanup in the generic ohci driver
+
commit c440bfe6d6d92d66478a7e84402b31f48413617b
Author: Stefan Roese <sr@denx.de>
Date: Wed Jun 6 11:42:13 2007 +0200
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
+Author: Rodolfo Giometti <giometti@linux.it>
+Date: Wed Jun 6 10:08:14 2007 +0200
+
+ Files include/linux/byteorder/{big,little}_endian.h define
+ __BIG_ENDIAN and __LITTLE_ENDIAN.
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Wed Jun 6 10:08:14 2007 +0200
+
+ Add USB PCI-OHCI, USB keyboard and event poll support to the
+ MPC8641HPCN board config file.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Wed Jun 6 10:08:14 2007 +0200
+
+ USB PCI-OHCI, interrupt pipe and usb event poll support
+
+ This patch added USB PCI-OHCI chips support, interrupt pipe support
+ and usb event poll support. For supporting the USB interrupt pipe, the
+ globe urb_priv is moved to purb in ed struct. Now, we can process
+ several urbs at one time. The interrupt pipe support codes are ported
+ from Linux kernel 2.4.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit fdcfaa1b02268b2899e374b35adf936c911a47eb
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Wed Jun 6 10:08:13 2007 +0200
+
+ USB event poll support
+
+ This patch adds USB event poll support, which could be used in usbkbd
+ and other usb devices driver when the asynchronous interrupt
+ processing is supported.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com
+
+commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
+Author: Rodolfo Giometti <giometti@linux.it>
+Date: Wed Jun 6 10:08:12 2007 +0200
+
+ ISP116x: delay for crappy USB keys
+
+ Using some (very) slow USB keys cause the USB host controller buffers
+ are not ready to be read by the CPU so we need an extra delay before
+ reading the USB storage data.
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit 09444143670c9c2243cb7aba9f70b3713d33bed1
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Jun 6 10:08:12 2007 +0200
+
+ Change duplicate usb_cpu_init_fail to usb_board_init_fail
+
+ Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
+ this out.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
Date: Tue Jun 5 12:30:52 2007 -0500
Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 5b1313fb2758ffce8b624457f777d8cc6709608d
+Author: Nikita V. Youshchenko <yoush@debian.org>
+Date: Wed May 23 12:45:19 2007 +0400
+
+ fix compilation problem for mpc8349itx CFG_RAMBOOT
+
+ Current include/configs/MPC8349ITX.h does contain some support for building
+ image that will be started from memory (without putting in into flash).
+ It could be triggered by building with TEXT_BASE set to a low value.
+
+ However, this support is incomplete: using of low TEXT_BASE causes
+ defining configuration macros in inconsistent way, which later leads
+ to compilation errors. In particular. flash support is being disabled,
+ but then flash structures get referenced.
+
+ This patch fixes this, making it possible to build with low TEXT_BASE.
+
+ Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8a364f0970de49949d635e60accf463c6443ef8c
+Author: Nikita V. Youshchenko <yoush@debian.org>
+Date: Wed May 23 12:45:25 2007 +0400
+
+ add missing 'console' var to default mpc8349itx config
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
Author: Stefan Roese <sr@denx.de>
Date: Fri Jun 1 16:18:17 2007 +0200
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
+Author: Ulf Samuelsson <ulf@atmel.com>
+Date: Thu May 24 12:12:47 2007 +0200
+
+ [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
+
+ Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit d756894722c888d09a9fa1df8323753772d3dcce
Author: Stefan Roese <sr@denx.de>
Date: Thu May 24 09:49:00 2007 +0200
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 822d55365bb557e084d0e33625a6dedcc866110b
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed May 23 14:09:46 2007 -0500
+
+ Add LIST_86xx MAKEALL target for PowerPC builds.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
commit 9f0077abd69f7a7c756a915b961037302be3e6f2
Author: Stefan Roese <sr@denx.de>
Date: Tue May 22 12:48:09 2007 +0200
Makefile permissions
+commit 255a3577c848706441daee0174543efe205a77f8
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed May 16 16:52:19 2007 -0500
+
+ Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
+
+ For all practical u-boot purposes, TSECs don't differ throughout the
+ mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
commit 70124c2602ae2d4c5d3dba05b482d91548242de8
Author: Stefano Babic <sbabic@denx.de>
Date: Wed May 16 14:49:12 2007 +0200
Coding Style Cleanup, new CHANGELOG
+commit 3162eb836903c8b247fdc7470dd39bfa6996f495
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue May 15 23:38:05 2007 +0200
+
+ Minor coding style cleanup.
+
+commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
+Author: mushtaq khan <mushtaq_k@procsys.com>
+Date: Fri Apr 20 14:23:02 2007 +0530
+
+ Add driver for S-ATA-controller on Intel processors with South
+ Bridge, ICH-5, ICH-6 and ICH-7.
+
+ Implementation:
+
+ 1. Code is divided in to two files. All functions, which are
+ controller specific are kept in "drivers/ata_piix.c" file and
+ functions, which are not controller specific, are kept in
+ "common/cmd_sata.c" file.
+
+ 2. Reading and Writing from the S-ATA drive is done using PIO method.
+
+ 3. Driver can be configured for 48-bit addressing by defining macro
+ CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
+ addressing.
+
+ 4. S-ATA read function is hooked to the File system, commands like
+ ext2ls and ext2load file can be used. This has been tested.
+
+ 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
+ controller and identifies the S-ATA drives connected to it.
+
+ 6. U-Boot command "sata" is added, which is used to read/write, print
+ partition table and get info about the drives present. This I have
+ implemented in same way as "ide" command is implemented in U-Boot.
+
+ 7. This driver is for S-ATA in native mode.
+
+ 8. This driver does not support the Native command queuing and
+ Hot-plugging.
+
+ Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
+
+commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
+Author: mushtaq khan <mushtaq_k@procsys.com>
+Date: Mon Apr 30 15:57:22 2007 +0530
+
+ Fixes bug clearing the bss section for i386
+
+ Hi,
+ There is a bug in the code of clearing the bss section for processor
+ i386.(File: cpu/i386/start.S)
+ In the code, bss_start addr (starting addr of bss section) is put into
+ the register %eax, but the code which clears the bss section refers to
+ the addr pointed by %edi.
+
+ This patch fixes this bug by putting bss_start into %edi register.
+
+ Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
+
+commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
+Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
+Date: Mon Apr 30 16:47:28 2007 -0500
+
+ Add support for BCM5464 Quad Phy
+
+ Added support for Broadcom's BCM5464 Quad Phy
+
+ Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+
+commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Wed May 9 08:10:57 2007 +0800
+
+ Search the exception table with linear algorithm
+
+ Search the exception table with linear algorithm instead of
+ bisecting algorithm.
+ Because the exception table might be unsorted.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
+Author: Aubrey.Li <aubrey.adi@gmail.com>
+Date: Mon May 14 11:47:35 2007 +0800
+
+ Fix compilation issues on MACOSX
+
+ Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
+ Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
+
+commit 56fd7162985c412317bbf763a225fba23c64fd31
+Author: Stephen Williams <steve@icarus.com>
+Date: Tue May 15 07:55:42 2007 -0700
+
+ Fix for compile of JSE target
+
+ The attached patch fixes the compile of the JSE board in the
+ denx git as of 14 may 2007. It is an extremely simple patch,
+ it just adds the missing define of CFG_SYSTEMACE_WIDTH.
+
+ Fix to compile JSE against 20070514 git of u-boot
+
commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
Author: Stefan Roese <sr@denx.de>
Date: Fri May 11 12:01:49 2007 +0200
new: add writing to msr register
+commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon May 7 16:43:56 2007 +0200
+
+ Fix an ancient CHANGELOG conflict
+
commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
Author: Timur Tabi <timur@freescale.com>
Date: Sat May 5 08:12:30 2007 +0200
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 2f550ab976405300f5b07bf2890800840d0aa05f
+Author: Timur Tabi <timur@freescale.com>
+Date: Sat May 5 08:12:30 2007 +0200
+
+ 5xxx: write MAC address to mac-address and local-mac-address
+
+ Some device trees have a mac-address property, some have local-mac-address,
+ and some have both. To support all of these device trees, ftp_cpu_setup()
+ should write the MAC address to mac-address and local-mac-address, if they
+ exist.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
commit a79886590593ba1d667c840caa4940c61639f18f
Author: Thomas Knobloch <knobloch@siemens.com>
Date: Sat May 5 07:04:42 2007 +0200
Signed-off-by Dan Malek, <dan@embeddedalley.com>
+commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed May 2 13:31:53 2007 +0200
+
+ macb: Don't restart autonegotiation if we already have link
+
+ Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
+ link is already up.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 04fcb5d38bc90779cd9a710d60702075986f0e29
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed May 2 13:22:38 2007 +0200
+
+ macb: Introduce a few barriers when dealing with DMA descriptors
+
+ There were a few theoretical possibilities that the compiler might
+ optimize away DMA descriptor reads and/or writes and thus cause
+ synchronization problems with the hardware. Insert barriers where
+ we depend on reads/writes actually hitting memory.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
commit ffa621a0d12a1ccd81c936c567f8917a213787a8
Author: Andy Fleming <afleming@freescale.com>
Date: Sat Feb 24 01:08:13 2007 -0600
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
+Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
+Date: Sun Apr 29 14:01:54 2007 +0200
+
+ [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
+
+ MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
+ message. Use PVR to distinguish between the two variants, and print proper CPU
+ information.
+
+ Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
commit 5c5d3242935cf3543af01142627494434834cf98
Author: Kim Phillips <kim.phillips@freescale.com>
Date: Wed Apr 25 12:34:38 2007 -0500
mpc83xx: minor fixups for 8313rdb introduction
+commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Wed Apr 25 16:01:26 2007 +0200
+
+ [PATCH] simplify silent console
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
commit 144876a380f5756f57412caf74c1d6dc201dd796
Author: Michal Simek <monstr@monstr.eu>
Date: Tue Apr 24 23:01:02 2007 +0200
Signed-off-by: Scott Wood <scottwood@freescale.com>
+commit 7fc4c71a143be8666d70803fb25ae60379c95622
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Apr 23 15:39:59 2007 +0200
+
+ Fix file mode
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 38257988abfe74d459ca2ad748b109ca04e4efe1
+Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+Date: Mon Apr 23 15:30:39 2007 +0200
+
+ [PATCH] Avoid assigning PCI resources from zero address
+
+ If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
+ core complains and IDE drivers fails to work. Also, assigning zero to a BAR
+ was illegal according to PCI 2.1 (the later revisions seem to have excluded the
+ sentence about "0" being considered an invalid address) -- so, use a reasonable
+ starting value of 0x1000 (that's what the most Linux archs are using).
+
+ Alternatively, one might have fixed the calls to pci_set_region() individually
+ (some code even seems to have taken care of this issue) but that would have
+ been a lot more work. :-)
+
+ Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit afb903a2eb9436baa9270ccc0c27082d86497d89
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Mon Apr 23 14:00:11 2007 +0200
+
+ [patch] setenv(...) can delete environmentalvariables
+
+ update setenv() function so that entering a NULL value for the
+ variable's value will delete the environmental variable
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 36f104e5caa747d568eff26b369565af57c2ffa6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Apr 23 13:54:24 2007 +0200
+
+ [patch] use unsigned char in smc91111 driver for mac
+
+ the v_mac variable in the smc91111 driver is declared as a signed char ...
+ this causes problems when one of the bytes in the MAC is "signed" like 0xE0
+ because when it gets printed out, you get a display like:
+ 0xFFFFFFE0 and that's no good
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
+Author: Rodolfo Giometti <giometti@enneenne.com>
+Date: Mon Apr 23 13:10:52 2007 +0200
+
+ USB: (Another) delay for crappy USB keys.
+
+ Some USB keys are slow in giving back an answer when the Root HUB
+ enables power lines.
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
Author: Stefan Roese <sr@denx.de>
Date: Mon Apr 23 12:00:22 2007 +0200
Minor cleanup.
+commit 822af351ad2babc7d99033361a5fcacd30f6bc78
+Author: Rodolfo Giometti <giometti@enneenne.com>
+Date: Tue Apr 3 14:27:18 2007 +0200
+
+ Support for the Philips ISP116x HCD (Host Controller Driver)
+
+ Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
+
+commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Apr 3 14:27:08 2007 +0200
+
+ USB: cleanup monahans usb support. Remove dead code.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
commit a65c5768e5537530bd1780af3d3fddc3113a163c
Author: Stefan Roese <sr@denx.de>
Date: Mon Apr 2 10:09:30 2007 +0200
PATCH: Resolve GPL license problem
+commit ae00bb4b2944dc64a485ed72a19754b11af7c223
+Author: Rodolfo Giometti <giometti@enneenne.com>
+Date: Mon Mar 26 12:03:36 2007 +0200
+
+ PXA: pxa27x USB OHCI support
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon Mar 26 11:21:05 2007 +0200
+
+ USB: remove the S3C24X0_merge #define, which was introduced while
+ merging OHCI drivers.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
commit 1798049522f594013aea29457d46794298c6ae15
Author: Michal Simek <root@monstr.eu>
Date: Mon Mar 26 01:39:07 2007 +0200
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 58b485776698c3d71ec5a215e392123b4c15afa3
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon Nov 27 11:51:21 2006 +0100
+
+ Add a small README with information on the generic ohci driver.
+
+commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon Nov 27 11:46:46 2006 +0100
+
+ Fix some endianness issues related to the generic ohci driver
+
+commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon Nov 27 11:44:58 2006 +0100
+
+ Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
+ to choose between the old and the generic OHCI drivers.
+
+commit 53e336e9ffc51035bdc4e5867631b3378761b4df
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon Nov 27 11:43:09 2006 +0100
+
+ Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
+ and adapted board configs TQM5200 and yosemite accordingly. This commit
+ also makes the maximum number of root hub ports configurable
+ (CFG_USB_OHCI_MAX_ROOT_PORTS).
+
commit 78d620ebb5871d252270dedfad60c6568993b780
Author: Wolfgang Denk <wd@atlas.denx.de>
Date: Thu Nov 23 22:58:58 2006 +0100
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+commit 99d70e3a47affb9bae041a2caece7cd516e213b3
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Jun 26 11:06:00 2006 +0200
+
+ More code cleanup
+
commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
Author: Jon Loeliger <jdl@freescale.com>
Date: Thu Jun 22 08:51:46 2006 -0500
Signed-off-by: Jon Loeliger <jdl@freescale.com>
+commit 386eda022473394ad8f36b86f2bdc9b4cb816291
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Jun 14 18:14:56 2006 +0200
+
+ Code cleanup
+
+commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Jun 14 17:45:53 2006 +0200
+
+ Various USB related patches
+ - Add support for mpc8xx USB device.
+ - Add support for Common Device Class - Abstract Control Model USB console.
+ - Add support for flow control in USB slave devices.
+ - Add support for switching between gserial and cdc_acm using environment.
+ - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
+ - Update usbcore slightly to ease host enumeration.
+ - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
+ - Add AdderUSB_config as a defconfig to enable usage of the USB console
+ by default with the Adder87x U-Boot port.
+ Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
+
commit 8ecc971618f56029ad99d3516f8b297a6ed58971
Author: Jon Loeliger <jdl@jdl.com>
Date: Wed Jun 7 10:53:55 2006 -0500
Signed-off-by: Jon Loeliger <jdl@freescale.com>
+commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue May 30 16:56:14 2006 +0200
+
+ Support generic OHCI support for the s3c24x0 cpu.
+
commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date: Tue May 30 09:10:32 2006 -0500
Signed-off-by: Jon Loeliger <jdl@jdl.com>
+commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue May 23 13:38:35 2006 +0200
+
+ Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
+ fixes to the latter.
+
+commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue May 23 10:33:11 2006 +0200
+
+ More cleanup for the delta board and the generic usb_ohci driver. Added
+ CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
+ initialization and cleanup hooks respectively.
+
+commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon May 22 16:33:54 2006 +0200
+
+ This patch adds USB storage support for the delta board. This is the first
+ board to make use of a generic OHCI driver, that calls hooks for board
+ dependant initialization.
+
commit 14e37081ff3cac7ebe6e93836523429853b6b292
Author: Jon Loeliger <jdl@jdl.com>
Date: Fri May 19 13:28:39 2006 -0500
projects / karo-tx-uboot.git / blobdiff