+commit e881cb563e32f45832b7b6db77bdcd017adcbb41
+Author: Bruce Adler <bruce.adler@ccpu.com>
+Date: Fri Nov 2 13:15:42 2007 -0700
+
+ fix wording in README
+
+ Changed the wording to properly describe the shadowing
+ of the environment from ROM to RAM
+
+ Signed-off-by: Bruce Adler <bruce.adler@acm.org>
+
+commit ad845beef06245426c57b53dcdc01b7dc70e0d45
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Wed Oct 31 02:18:15 2007 +0900
+
+ blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ec22755799466c8a103664bb3a5e647bf9c238f4
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Thu Oct 25 16:08:14 2007 +0300
+
+ Trimmed some variables in ne2000.c
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Thu Oct 25 17:51:27 2007 +0800
+
+ Fix the issue of usb_kbd driver missing the scan code of key 'z'.
+
+ The scan code of the key 'z' is 0x1d, which should be handled.
+
+ The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
+ controller.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Thu Oct 25 17:30:04 2007 +0800
+
+ Fix USB support issue for MPC8641HPCN board.
+
+ The configuration file has already enabled USB, but it
+ missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
+ on MPC8641HPCN can not work because of the wrong USB
+ register endian.
+
+ And add the USB command to U-Boot commands list.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit 4e62041023dc3de9d98d977bb080235bc6d035e0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Oct 24 18:16:01 2007 +0200
+
+ Use config_cmd_default.h instead of config_cmd_all.h
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 56622f87857439b1c221e9deef11a9d5bb5d4308
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Oct 24 01:37:36 2007 +0200
+
+ TQM5200: Call usb_cpu_init() during board init
+
+ usb_cpu_init() configures GPS USB pins, clocks, etc. and
+ is required for proper operation of kernel USB subsystem.
+ This setup was previously done in the kernel by the fixup
+ code which is being removed, thus low level init must be
+ done by U-boot now.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Oct 23 16:25:50 2007 +0200
+
+ Fix typo in nfs.c
+
+ An obvious typo. Originally fixed in linkstation u-boot port.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Oct 23 14:35:05 2007 +0200
+
+ Fix a typo in cpu/mpc824x/interrupts.c
+
+ Since December 2003 the timer_interrupt_cpu() function in
+ cpu/mpc824x/interrupts.c contains what seems to be a superfluous
+ parameter. Remove it.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
+Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
+Date: Wed Oct 17 11:13:51 2007 +0200
+
+ add ft_cpu_setup(..) on mpc8260
+
+ Add ft_cpu_setup(..)-function to adapt it for use with libfdt
+ based on code from mpc5xxx
+
+ Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
+ --
+
+commit 6abd82e19ae93c0b4d104e50165e235915ec0875
+Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
+Date: Wed Oct 17 11:18:42 2007 +0200
+
+ changes for IDS8247 board support
+
+ To get the IDS8247 board working following are done:
+ - FCC2 is deactivated
+ - FCC1 is activated
+ - I2C is activated
+ - CFI driver is activated
+ - Adapted for use with LIBFDT
+
+ Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
+ --
+
+commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Oct 24 15:48:37 2007 +0200
+
+ ATSTK1002: Remove default ethernet addresses
+
+ Wolfgang is right: It's not a good idea to set up default initial
+ ethernet addresses for a board, even though they belong to the local
+ range.
+
+ This will change the failure mode from "IT manager screams at you for
+ using duplicate ethernet addresses" to a nice error message explaining
+ that the ethernet address hasn't been set properly.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit e5c794e491a57d829b6d8733e2ed8368a2269abf
+Author: Justin Flammia <jflammia@savantav.com>
+Date: Mon Oct 29 17:40:35 2007 -0400
+
+ DHCP Client Fix
+
+ This is a multi-part message in MIME format.
+
+ commit e6e505eae94ed721e123e177489291fc4544b7b8
+ Author: Justin Flammia <jflammia@savantav.com>
+ Date: Mon Oct 29 17:19:03 2007 -0400
+
+ Found a bug in the way the DHCP Request packet is built, where the IP address
+ that is offered by the server is bound to prematurely. This patch is a fix of
+ that bug where the IP address offered by the DHCP server is not used until
+ after the DHCP ACK from the server is received.
+
+ Signed-off-by: Justin Flammia <jflammia@savantav.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:16:22 2007 -0500
+
+ ColdFire 54455: Fix correct boot location for atmel and intel
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:14:00 2007 -0500
+
+ ColdFire: Fix build error when CONFIG_WATCHDOG is defined
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit c67e12e705b204cfe914e3e3e693d69a445dcabf
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:12:36 2007 -0500
+
+ ColdFire 5329: Assign correct SDRAM size and fix cache
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:10:23 2007 -0500
+
+ ColdFire 5253: Assign correct SDRAM size
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 2acefa72ee0026f862ab65597ca687428f63a973
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 25 17:09:17 2007 -0500
+
+ ColdFire 5282: Fix external flash boot and return dramsize
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Oct 25 17:20:01 2007 +0200
+
+ TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Oct 24 08:42:25 2007 +0200
+
+ TQM5200: fix spurious characters on second serial interface
+
+ With this patch PSC3 is configured as UART. This is done, because if
+ the pins of PSC3 are not configured at all (-> all pins are GPI),
+ due to crosstalk, spurious characters may be send over the RX232_2_TXD
+ signal line.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit be4a87f11e297a5cededbf7dd71c0248f3874acd
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Oct 24 08:41:27 2007 +0200
+
+ TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
+
+ Some commands for the STK52xx base board try to access the SM501 grafic
+ controller. But the TQM5200S has no grafic controller (only the TQM5200
+ and the TQM5200B have). This patch deactivates the commands accessing
+ the SM501 for the TQM5200S.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit b31f64343ead9482cd439b1adbe4c34026a641b1
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Oct 22 16:45:53 2007 +0200
+
+ TQM5200: fix spurious characters on second serial interface
+
+ With this patch PSC3 is configured as UART. This is done, because if
+ the pins of PSC3 are not configured at all (-> all pins are GPI),
+ due to crosstalk, spurious characters may be send over the RX232_2_TXD
+ signal line.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Oct 22 16:40:06 2007 +0200
+
+ TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
+
+ Some commands for the STK52xx base board try to access the SM501 grafic
+ controller. But the TQM5200S has no grafic controller (only the TQM5200
+ and the TQM5200B have). This patch deactivates the commands accessing
+ the SM501 for the TQM5200S.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Oct 21 09:14:28 2007 +0200
+
+ Mips: Fix string functions differ prototype declaration
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Oct 19 17:51:40 2007 -0500
+
+ fsl_pci_init enable COMMAND_MEMORY if inbound window
+
+ Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
+ to pciauto_setup_device has the side effect of not getting
+ COMMAND_MEMORY set.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit e9d0d527992566ebef9826962ff1745b2f082b92
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 10:55:24 2007 +0200
+
+ delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 08:10:15 2007 +0200
+
+ fix warning: no return statement in function returning non-void
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e78220f6e514206757acfe247297fc9a328a881f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 06:33:45 2007 +0200
+
+ xsengine: Fix no partition type specified, use DOS as default
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 00:24:59 2007 +0200
+
+ lubbock: Fix no partition type specified, use DOS as default
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Oct 23 16:50:03 2007 +0200
+
+ Coding style: keep lists sorted; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 58b74b05c621e2835ecf4e2d3243042cf4186777
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 00:09:05 2007 +0200
+
+ Fix missing drivers makefile entries ds1722.c mw_eeprom.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 96455bfebc9887837095c9051d216f53c61b5f10
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 19 00:07:39 2007 +0200
+
+ Fix warning differ in signedness in board/innokom/innokom.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Fri Oct 19 00:25:33 2007 +0200
+
+ fix pxa255_idp board
+
+ The pxa255_idp being an old unmaintained board showed several issues:
+ 1. CONFIG_INIT_CRITICAL was still defined.
+ 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
+ 3. Symbol flash_addr was undeclared.
+ 4. The boards lowlevel_init function was still called memsetup.
+ 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
+ 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
+ 'target CPU does not support interworking' warnings on recent compilers.
+ 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
+ indexes rather than the register definitions from the pxa-regs header
+ file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
+ avoid any ambiguities.
+ 8. There were several redefinition warnings concerning ICMR, OSMR3,
+ OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
+ 9. The board configuration file was rather outdated.
+ 10. The part header file defined the vendor, product and revision arrays
+ as unsigned chars instead of just chars in the block_dev_desc_t
+ structure.
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
+Author: Rune Torgersen <runet@innovsys.com>
+Date: Wed Oct 17 11:56:31 2007 -0500
+
+ Make MPC8266ADS command selection more robust
+
+ Fix MPC8266 command line definition so it won't break when new commands
+ are added to u-boot.
+ Signed-off-by Rune Torgersen <runet@innovsys.com>
+
+commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Oct 23 13:14:10 2007 +0200
+
+ Motion-PRO: Update configuration to accomodate next generation board.
+
+ New board has faster oscillator and a different Flash chip. This affects:
+ - CFG_MPC5XXX_CLKIN
+ - SDRAM timings
+ - Flash CS configuration (timings)
+ - Flash sector size, and thus MTD partition layout
+ - malloc() arena size (due to bigger Flash sectors)
+ - smaller memory test range (due to bigger malloc() arena)
+
+ This patch also enables more extensive memory testing via "mtest".
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit eff501904df2bf1724a750062628ba2c51dbb1f8
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Oct 23 11:36:07 2007 +0200
+
+ Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
+
+ Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
+ register must be written a value of 0x00000004 as the first step of the
+ SDRAM contorller configuration.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Oct 23 10:22:16 2007 +0100
+
+ Move PL01* serial drivers to drivers/serial and adjust Makefiles.
+
+commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Sun Oct 21 22:10:10 2007 +0900
+
+ [MIPS] Fix UNCACHED_SDRAM
+
+ PHYSADDR is for physical address, KSEG1ADDR is for uncached.
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 00101dd7a32d12f698150123e47e4b3420279f86
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 21:30:42 2007 +0900
+
+ [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit eb700636db017d310edaeb559b13d82588560674
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:37 2007 +0900
+
+ [MIPS] u-boot.lds: Define _gp in a standard manner
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:36 2007 +0900
+
+ [MIPS] Fix $gp usage
+
+ Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
+ As a general principle, we should use _gp for $gp.
+
+ Thanks to linker script's help we fortunately have _gp which equals to
+ _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
+ be able to access to GOT entires, global variables and procedure entry
+ points. The right thing to do is to use _gp.
+
+ This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
+ which holds the offset from _gp. When updating GOT entries, we use this
+ offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
+
+ This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
+ I made some change to leave over num_got_entries.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Cc: Vlad Lungu <vlad@comsys.ro>
+
+commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:36 2007 +0900
+
+ [MIPS] u-boot.lds: Fix __got_start and __got_end
+
+ Ensure that __got_start points to top of the `.got', and __got_end points
+ to bottom as well, so that we never fail to count num_got_entries.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Sun Oct 21 10:55:36 2007 +0900
+
+ [MIPS] u-boot.lds: Remove duplicated .sdata section
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 21 01:01:17 2007 +0200
+
+ Minor coding style cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Thu Oct 4 20:47:10 2007 +0300
+
+ Fix NE2000 driver:
+
+ Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
+ to do anything in eth_stop() if eth_init() was not called.
+ Simplified RX path in order to avoid timeouts on really really
+ fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
+ clever enough to cope with 1 packet per eth_rx().
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit df90968b48fb34fa9072fab150db2ac89678f537
+Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
+Date: Mon Sep 24 13:32:13 2007 -0400
+
+ Setting MSR[DE] in do_reset
+
+ Hello,
+ This patch ensures the soft reset of the board for the 85xx boards
+ by setting the MSR[DE] in the do_reset function.
+
+ Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
+
+commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
+Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
+Date: Mon Sep 24 13:36:01 2007 -0400
+
+ MSR overwrite fix
+
+ Hello,
+ This patch fixes the MSR overwrite in the start.S when moving out of
+ the last 4K page.
+
+ Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
+
+commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
+Author: Dan Wilson <dwilson@fulcrummicro.com>
+Date: Fri Oct 19 11:33:48 2007 -0500
+
+ tsec driver should clear RHALT on startup
+
+ This was causing problems for some people.
+
+ Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
+ Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 11 00:29:18 2007 -0500
+
+ Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
+
+ On the MPC85xx CDS we have two issues:
+
+ 1. The device tree fixup code did not check to see if the property we are
+ trying to update is actually found. Its possible that it would update
+ random memory starting at 0.
+
+ 2. Newer Linux kernel's have moved the location of the PCI nodes to be
+ sibilings of the soc node and not children. The explicit PATH to the PCI
+ node would not be found for these device trees. Add the ability to handle
+ both paths. In the future we shouldn't handle such fixups by explicit path.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a3063eec775719b7e91023bbec3f64b3118791df
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 11 00:18:48 2007 -0500
+
+ Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
+
+ On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
+ console. Make it so we match that config what we tell Linux as the early
+ STDOUT console.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e1ce3cb617bb06f91f82f98915391175addf3e82
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 2 11:12:27 2007 -0500
+
+ Remove magic numbers from cache related operations for mpc85xx
+
+ The mpc85xx start code uses some magic numbers that we actually
+ have #defines for in <config.h> so use those instead.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Oct 19 16:47:26 2007 +0200
+
+ Fix two typos.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 281df457c1aa50d2752165d0c5c3282d4027b974
+Author: Tony Li <tony.li@freescale.com>
+Date: Thu Oct 18 17:47:19 2007 +0800
+
+ mpc83xx: Add configure entry for MPC83xx ATM support
+
+ Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
+ Makfile and MAKEALL
+
+ Signed-off-by: Tony Li <tony.li@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d2646554f529a9577515eceb0ec5eceee18244ba
+Author: Tony Li <tony.li@freescale.com>
+Date: Thu Oct 18 17:44:38 2007 +0800
+
+ mpc83xx: pq-mds-pib.c typo error
+
+ Correct to val8 from val.
+
+ Signed-off-by: Tony Li <tony.li@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3e11ae80fec1ee12194940955431186abf6009c2
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 17 15:40:19 2007 +0200
+
+ ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
+Author: runet@innovsys.com <runet@innovsys.com>
+Date: Tue Oct 16 14:50:40 2007 -0500
+
+ Make MPC8266ADS board compile again.
+
+ Signed-off-by: Runet Torgersen <runet@innovsys.com>
+
+commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Aug 27 12:41:03 2007 -0500
+
+ 86xx: Allow for fewer DDR slots per memory controller.
+
+ As a direct correlation exists between DDR DIMM slots
+ and SPD EEPROM addresses used to configure them, use
+ the individually defined SPD_EEPROM_ADDRESS* values to
+ determine if a DDR DIMM slot should have its SPD
+ configuration read or not.
+
+ Effectively, this now allows for 1 or 2 DIMM slots
+ per memory controller.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4d4a945e189a2f384c66432316da2788a0ac1607
+Author: Rodolfo Giometti <giometti@enneenne.com>
+Date: Mon Oct 15 11:59:17 2007 +0200
+
+ PXA USB OHCI: "usb stop" implementation.
+
+ Some USB keys need to be switched off before loading the kernel
+ otherwise they can remain in an undefined status which prevents them
+ to be correctly recognized by the kernel.
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit e2e93442e558cf1500e92861f99713b2f045ea22
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 15 11:39:00 2007 +0200
+
+ ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
+
+ The I2C bootstrap values that can be setup via the "bootstrap" command,
+ were setup incorrect regarding the generation of the internal sync PCI
+ clock. The values for PLB clock == 133MHz were slighly incorrect and the
+ values for PLB clock == 166MHz were totally incorrect. This could
+ lead to a hangup upon booting while PCI configuration scan.
+
+ This patch fixes this issue and configures valid PCI divisor values
+ for the sync PCI clock, with respect to the provided external async
+ PCI frequency.
+
+ Here the values of the formula in the chapter 14.2 "PCI clocking"
+ from the 440EPx users manual:
+
+ AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
+
+ 33MHz async PCI frequency:
+ PLB = 133:
+ => 32 <= 44.3 <= 65 (div = 3)
+
+ PLB = 166:
+ => 32 <= 55.3 <= 65 (div = 3)
+
+ 66MHz async PCI frequency:
+ PLB = 133:
+ => 65 <= 66.5 <= 132 (div = 2)
+
+ PLB = 166:
+ => 65 <= 83 <= 132 (div = 2)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 15 11:29:33 2007 +0200
+
+ ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
+
+ The BCSR status bit for the 66MHz PCI operation was correctly
+ addressed (MSB/LSB problem). Now the correct currently setup
+ PCI frequency is displayed upon bootup.
+
+ This patch also fixes this problem on Rainier & Yellowstone, since these
+ boards use the same souce code as Sequoia & Yosemite do.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Sep 26 17:55:56 2007 +0200
+
+ TQM860M: adjust for doubled flash sector size.
+
+ Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
+ doubled sector size.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
+Author: Jens Gehrlein <jens.gehrlein@tqs.de>
+Date: Wed Sep 26 17:55:54 2007 +0200
+
+ TQM8xx: Fix CAN timing.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit d43e489baf02afae49077791fb22332d240d8656
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Thu Sep 27 14:54:36 2007 +0200
+
+ TQM866M: fix SDRAM refresh
+
+ At 133 MHz the current SDRAM refresh rate is too fast
+ (measured 4 * 1.17 us).
+ CFG_MAMR_PTA changes from 39 to 97. This result
+ in a refresh rate of 4 * 7.8 us at the default clock
+ 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
+ This is a compromise until a new method is found to
+ adjust the refresh rate.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 9ef57bbee1c67cc01da2026c242c4692db32be36
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Sep 26 17:55:55 2007 +0200
+
+ TQM866M: adjust for doubled flash sector size.
+
+ Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
+ doubled sector size.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Oct 14 16:12:29 2007 +0200
+
+ [FIX] XUPV2P change command handling
+ and remove code violation
+
+commit 636400198228d96983c06657b17f760f5989958e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 14 00:13:19 2007 +0200
+
+ Prepare for 1.3.0-rc3 release
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Sep 29 13:41:37 2007 +0200
+
+ Fix warning differ in signedness in cpu/pxa/mmc.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit fc19e36f741e8bc727c0a330170b3b5db90399ef
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Oct 13 23:51:14 2007 +0200
+
+ Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Oct 13 21:15:39 2007 +0200
+
+ Coding Style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e1893815b0999410d7a327589611c7b38e95299e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Oct 12 15:49:39 2007 +0200
+
+ GP3 SSA: enable RTC
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8002012041f1ff9f997a5727abe5015f70cd2e46
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Oct 9 13:58:24 2007 +0200
+
+ [ads5121] EEPROM support added.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Oct 6 18:55:35 2007 +0200
+
+ AVR32: Initialize bi_flash* in board_init_r
+
+ The ATSTK1000-specific flash driver intializes bi_flashstart,
+ bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
+ driver, don't.
+
+ Initialize these in board_init_r instead so that things will still be
+ set up correctly when we switch to the CFI driver.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Oct 5 10:40:54 2007 +0200
+
+ tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 92869195ef8210758d2176230c0a36897afd50ed
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Oct 5 09:46:06 2007 +0200
+
+ CM5200: Fix missing null-termination in hostname manipulation code
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Tue Oct 2 19:09:01 2007 +0200
+
+ Fix memtest breakage
+
+ CFG_MEMTEST_START uses weird magic involving gd, which fails to
+ compile. Use hardcoded values instead (we actually know how much RAM
+ we have on board.)
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 2 11:44:46 2007 +0200
+
+ ppc4xx: Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 2 11:44:19 2007 +0200
+
+ ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Mon Oct 1 09:51:50 2007 +0200
+
+ Program EPLD to force full duplex mode for PHY.
+
+ EPLD forces modes of PHY operation. By default full duplex is turned off.
+ This fix turns it on.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
+Author: Timo Ketola <timo.ketola@exertus.fi>
+Date: Mon Sep 24 14:50:32 2007 +0300
+
+ Bugfix: Use only one PTD for one endpoint
+
+ Original isp116x-hcd code prepared multiple PTDs for longer than 16
+ byte transfers for one endpoint. That is unnecessary because the
+ ISP116x is able to split long data from one PTD into multiple
+ transactions based on the buffer size of the endpoint. It also caused
+ serious problems if the endpoint NAKed some of the transactions. In
+ that case ISP116x wouldn't notice that the other PTDs were for the same
+ endpoint and would try the other PTDs possibly out of order. That would
+ break the whole transfer.
+
+ This patch makes isp116x_submit_job to use one PTD for one transfer.
+
+ Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 86ec86c04326c3913178a7679aa910de071da75d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Sep 27 23:27:47 2007 +0200
+
+ Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Sep 11 14:12:55 2007 +0200
+
+ ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Sep 26 16:35:54 2007 -0500
+
+ 85xx io out functions need sync after write.
+
+ This fixes the mc146818 rtc_read/write functions for 85xx.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Sep 25 15:48:05 2007 -0600
+
+ Fpga: fix incorrect test of CFG_FPGA_XILINX macro
+
+ CFG_FPGA_XILINX is a bit value used to test against the value in
+ CONFIG_FPGA. Testing for a value will always return TRUE. I don't
+ think that is the intention in this code.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:41:30 2007 +0200
+
+ [FIX] change command handling and removing code violation
+
+commit f240356507038e5ce55e8a24cb2607e9eae6d10c
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:36:06 2007 +0200
+
+ [FIX] change sets of commands
+ because changing of command handling brings
+ compilation problems
+
+commit cb1bc63b75a232571eb69aa2c8aa919321655845
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:30:42 2007 +0200
+
+ [FIX] Email reparation & Copyright
+ Both codes are written by myself without any
+ support from CTU
+
+commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:25:11 2007 +0200
+
+ [PATCH] Change macro name for UartLite
+ because PowerPC 405 can use UartLite as console
+
+commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:21:19 2007 +0200
+
+ [PATCH] Add support for design without interrupt controller
+ Polling timer
+
+commit 0731933ec8ec45d02ba89b52df673d526873cdde
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:19:48 2007 +0200
+
+ [FIX] resolve problem with cpu without barrel shifter
+
+commit db14d77995ce515b728b178b63f82babe60e3d56
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:18:46 2007 +0200
+
+ [FIX] repair email address
+
+commit 481d4328618804add1f818a6c96296121cd0528e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:17:42 2007 +0200
+
+ [FIX] repair MFSL commands
+
+commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 24 00:08:37 2007 +0200
+
+ synchronizition with mainline
+
+commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Sep 20 00:04:14 2007 +0200
+
+ v1.3.0-rc2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 135e19bc2773ebca487e9a8371f67e1ba202313a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 18 21:36:35 2007 +0200
+
+ Avoid compiler warning.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8a783a65851bc7421ab69f442261215e21b8891a
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Sep 18 12:24:57 2007 -0600
+
+ Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
+
+ /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
+ nulls in a string differently. For example, the following statement:
+ echo "this is a string\0" > afile
+ Will produce the following with /bin/bash:
+ "this is a string\0"
+ But with /bin/dash, will produce:
+ "this is a string
+
+ Bug fixed by moving the embedded null out of the makefile and into the
+ config header. Also renamed the macro to avoid usage colision with the same
+ macro used by other board ports.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 18 17:40:27 2007 +0200
+
+ MCC200: fix build warning
+
+ The MCC200 board config file includes version.h for some customer-
+ specific setting, which causes warnings with "make depend"; build
+ version.h before depend.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit bd86220f58b99d6896198c385fda132f0c980915
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 18 13:07:54 2007 +0100
+
+ Move coloured led API to status_led.h
+ Improve indentation in drivers/at45.c
+
+commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
+Author: Eirik Aanonsen <eaa@wprmedical.com>
+Date: Tue Sep 18 08:47:20 2007 +0200
+
+ Update atstk1002 bootargs.
+
+ Updates to atstk1002 U-Boot header file:
+ - Changed bootargs:
+ * Set the bootargs for at1002 to point to the SD-card partition instead
+ * ... of the boot flash.
+ * Removing the rootfstype since that argument are not needed.
+
+ Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
+Author: Eirik Aanonsen <eaa@wprmedical.com>
+Date: Wed Sep 12 13:32:37 2007 +0200
+
+ Add some comments to clocks in atstk1002.h
+
+ This patch applies some clarifying comments to how the different
+ clocks are setup according to atstk1002.h Some of the previous
+ comments where stating wrongful information.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 97213f32416ead885deafea86774e912ffd60ad0
+Author: David Saada <David.Saada@ecitele.com>
+Date: Mon Sep 17 17:04:47 2007 +0200
+
+ Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
+
+ Signed-off-by: David Saada <david.saada@ecitele.com>
+
+commit 30363e98fa470fbecea5e8bc0f1443352754f303
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 17 08:20:47 2007 +0200
+
+ Small whitespace cleanup of OneNAND patch
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Sep 10 17:15:14 2007 +0900
+
+ OneNAND support (take #2)
+
+ [PATCH 3/3] OneNAND support (take #2)
+
+ OneNAND support at U-Boot
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 17aa2800457df0c06b41516f46f126712c196219
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Sep 10 17:14:34 2007 +0900
+
+ OneNAND support (take #2)
+
+ [PATCH 2/3] OneNAND support (take #2)
+
+ OneNAND support at U-Boot
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Sep 10 17:13:49 2007 +0900
+
+ OneNAND support (take #2)
+
+ [PATCH 1/3] OneNAND support (take #2)
+
+ OneNAND support at U-Boot
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Sep 16 20:51:57 2007 +0200
+
+ [FIX] remove files form repository
+
+commit 67c31036acaaaa992fc346cc89db0909a7e733c4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Sep 16 17:10:04 2007 +0200
+
+ TQM8xx[LM]: Fix broken environment alignment.
+
+ With recent toolchains, the environment sectors were no longer aligned to
+ sector boundaries. The reason was a combination of two bugs:
+
+ 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
+ for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
+ this gets defined, is not included here (and cannot be included
+ without causing lots of problems).
+
+ Added a new #define CFG_USE_PPCENV for all boards which really
+ want to put the environment is a ".ppcenv" section.
+
+ 2) The linker scripts just include environment.o, silently assuming
+ that the objects in that file are really in the order in which
+ they are coded in the C file, i. e. "environment" first, then
+ "redundand_environment", and "env_size" last. However, current
+ toolchains (GCC-4.x) reorder the objects, causing the environment
+ data not to start on a flash sector boundary:
+
+ Instead of: we got:
+
+ 40008000 T environment 40008000 T env_size
+ 4000c000 T redundand_environment 40008004 T redundand_environment
+ 40010000 T env_size 4000c004 T environment
+
+ Note: this patch fixes just the first part, and cures the alignment
+ problem by making sure that "env_size" gets placed correctly. However,
+ we still have a potential issue because primary and redundant
+ environment sectors are actually swapped, i. e. we have now:
+
+ 40008000 T redundand_environment
+ 4000c000 T environment
+ 40010000 T env_size
+
+ This shall be fixed in the next version.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit eb6da8050797c204c9d010548424186c7ce32fc1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Sep 16 02:39:35 2007 +0200
+
+ TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cd2d1602c54cc6957bdef3872272a4b264893960
+Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
+Date: Mon Sep 10 14:54:56 2007 -0400
+
+ Typo fix in tsec.c
+
+ Fixup for the break statement in wrong place.
+
+ [Patch by urwithsughosh@gmail.com]
+ Acked-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 11 17:04:00 2007 +0200
+
+ Fix do_div() usage in nand process output
+
+ Fix usage of do_div() in nand erase|read|write process output.
+
+ The last patch to nand_util.c introduced do_div() instead of libgcc's
+ implementation. But do_div() returns the quotient in its first
+ macro parameter and not as result.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit c750d2e6692a000a82f29de7bf24e3dc21239161
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Sep 12 12:36:53 2007 +0200
+
+ NAND: Add CFG_NAND_QUIET option
+
+ This config option sets the default for the progress information
+ output behavior that can also be configured through the 'quiet'
+ environment variable.
+
+ The legacy NAND code does not print the current progress info
+ on the console. So this option is for backward compatibility for
+ units that are in the field and where setting the quiet variable
+ is not an option. With CFG_NAND_QUIET set to '1' the console
+ progress info is turned off. This can still be overwritten
+ through the environment variable.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit dcb88630290d2bcd803386dd4c2be73142994c4f
+Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
+Date: Thu Sep 13 16:06:05 2007 -0700
+
+ ColdFire: fix build error becasue of bad type of mii_init()
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
+Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
+Date: Thu Sep 13 16:04:05 2007 -0700
+
+ ColdFire: Fix build error caused by pixis.c
+
+ Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit e21659e30660a1377c42af135a6114efe39801d9
+Author: Sam Sparks <SSparks@twacs.com>
+Date: Fri Sep 14 11:14:42 2007 -0600
+
+ Update MPC8349ITX*_config to place config.tmp in right place.
+
+ MPC834ITX*_config does not store config.tmp at the correct locatation,
+ causing MPC8349ITXGP to have the wrong TEXT_BASE.
+
+ Signed-off-by: Sam Sparks <SSparks@twacs.com>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 1218abf1b5817a39a82399b4b928b00750575bda
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Sep 15 20:48:41 2007 +0200
+
+ Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 66b3f24d665be678a9dbb125b1e84185400f63b5
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Sep 15 11:55:42 2007 +0200
+
+ Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
+
+ As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
+ function local.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+ [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
+
+commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Sep 15 00:03:35 2007 +0200
+
+ Synchronize with U-BOOT mainline
+
+commit d7fee32b7e61fe11c64e371cde79faa4768e8350
+Author: Sam Sparks <SSparks@twacs.com>
+Date: Fri Sep 14 11:14:42 2007 -0600
+
+ Update MPC8349ITX*_config to place config.tmp in right place.
+
+ MPC834ITX*_config does not store config.tmp at the correct locatation,
+ causing MPC8349ITXGP to have the wrong TEXT_BASE.
+
+ Signed-off-by: Sam Sparks <SSparks@twacs.com>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Sep 13 18:21:48 2007 +0200
+
+ cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Sep 13 16:33:59 2007 +0200
+
+ tqm5200: Restore customary env. variable boot commands for powerpc kernels
+
+ - update default definitions of kernel_addr and fdt_addr env. variables
+ - make arch/powerpc booting the default scenario
+ - update MTD partition layout to match the above
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit f34024d4a328e6edd906456da98d2c537155c4f7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Sep 12 00:48:57 2007 +0200
+
+ Fix memory corruption problem on STX GP3 SSA Board.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 11 15:35:01 2007 +0100
+
+ Final tidy
+
+commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Sep 11 15:42:11 2007 +0200
+
+ [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
+ scan on second pci bus.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Sep 11 12:57:52 2007 +0200
+
+ [ppc4xx] Individual handling of sdram.c for bamboo_nand build
+
+ Bamboo has a file sdram.c which needs special treatment when building in
+ separate directory. It has to be linked to build directory otherwise it is
+ not seen.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit d45963854eff39d575124d859419bb4953ce2c87
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Sep 11 00:37:04 2007 +0200
+
+ [FIX] Microblaze ML401 - repare FLASH handling
+
+commit 38c1ef728d19950414a8ab1ccfc53767848fa346
+Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
+Date: Mon Sep 10 16:55:59 2007 +0100
+
+ Allocate CPU Architecture Code for STMicroelectronics' ST200.
+
+ Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
+ ---------------------------------------------------
+
+commit 754bac48156f8958d8f6a53a51eda88ab5758929
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 10 20:42:31 2007 +0200
+
+ Update version to match current state.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Mon Sep 10 17:39:08 2007 +0200
+
+ [MPC512x] Streamline frame handling in the FEC driver
+
+ - convert frame size settings to be derived from a single base
+ - set frame size to the recommended default value
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Sep 10 11:34:00 2007 +0900
+
+ Remove compiler warning: target CPU does not support interworking
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Sep 9 21:21:33 2007 +0200
+
+ Fix compile error in spc1920 config.
+
+ Signed-off-by: Markus Klotzbücher <mk@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Fri Sep 7 09:25:07 2007 -0600
+
+ Bugfix: make bootm+libfdt compile on boards with no flash
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Sep 7 18:35:37 2007 +0200
+
+ [PPC440SPe] PCIe environment settings for Katmai and Yucca
+
+ - 'pciconfighost' is set by default in order to be able to scan bridges
+ behind the primary host/PCIe
+
+ - 'pciscandelay' env variable is recognized to allow for user-controlled
+ delay before the PCIe bus enumeration; some peripheral devices require a
+ significant delay before they can be scanned (e.g. LSI8408E); without the
+ delay they are not detected
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 7f1913938984ef6c6a46cb53e003719196d9c5de
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Sep 7 18:20:23 2007 +0200
+
+ [PPC440SPe] Improve PCIe configuration space access
+
+ - correct configuration space mapping
+ - correct bus numbering
+ - better access to config space
+
+ Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
+ first device on the first bus. We now allow to configure up to 16 buses;
+ also, scanning for devices behind the PCIe-PCIe bridge is supported, so
+ peripheral devices farther in hierarchy can be identified.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Sep 7 17:46:18 2007 +0200
+
+ [PPC440SPe] Convert machine check exceptions handling
+
+ Convert using fixup mechanism to suppressing MCK for the duration of config
+ read/write transaction: while fixups work fine with the case of a precise
+ exception, we identified a major drawback with this approach when there's
+ an imprecise case. In this scenario there is the following race condition:
+ the fixup is (by design) set to catch the instruction following the one
+ actually causing the exception; if an interrupt (e.g. decrementer) happens
+ between those two instructions, the ISR code is executed before the fixup
+ handler the machine check is no longer protected by the fixup handler as it
+ appears as within the ISR code. In consequence the fixup approach is being
+ phased out and replaced with explicit suppressing of MCK during a PCIe
+ config read/write cycle.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit ff7640c9ead8806b5d827f2b29f9cb2632add729
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 7 17:43:36 2007 +0200
+
+ Fix typo in MAKEALL script.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Sep 7 17:09:21 2007 +0200
+
+ [MPC512x] Proper handling of larger frames in the FEC driver
+
+ When frame larger than local RX buffer is received, it is split and handled
+ by two buffer descriptors. Prior to this patch the FEC driver discarded
+ contents of a buffer descriptor without the 'LAST' bit set, so the first
+ part of the frame was lost in case of larger frames. This fix allows to
+ safely combine the two pieces into the whole frame.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Sep 7 17:05:36 2007 +0200
+
+ [MPC512x] Correct fixup relocation
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit a89cbbd27a60e6740772000fd0688ffba1c2576a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 7 01:21:25 2007 +0200
+
+ Update CHANGELOG, minor coding style cleanup.
+
+commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
+Author: stefano babic <sbabic@denx.de>
+Date: Thu Aug 30 23:01:49 2007 +0200
+
+ PXA270: Added support for TrizepsIV board.
+
+ This patch add support for the Trizeps IV module (520Mhz).
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
+Author: stefano babic <sbabic@denx.de>
+Date: Thu Aug 30 22:57:04 2007 +0200
+
+ PXA270: Add support for multiple serial ports.
+
+ This patch adds support for multiple serial ports to the PXA target.
+ FFUART, BTUART and STUART are supported.
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
+Author: stefano babic <sbabic@denx.de>
+Date: Thu Aug 30 22:48:47 2007 +0200
+
+ PXA270: fix compile issue (invalid lvalue)
+
+ Code is broken for PXA270 due to "invalid lvalue in assignment".
+
+ This patch fix it in pxa-regs.h
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Thu Aug 30 18:19:05 2007 +0800
+
+ Add BUILD_DIR support for bios emulator.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit b4d8a55145442f136982634862341a3e02002bda
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Fri Aug 31 14:41:51 2007 +0900
+
+ [MIPS] Remove inline asm string functions
+
+ Stop using inline string functions on MIPS as other ARCHs do so,
+ since the optimized inline asm versions are not small.
+
+ This change is triggered by a following MIPS build error:
+ common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
+ common/exports.c:32: undefined reference to `strcmp'
+ make: *** [u-boot] Error 1
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Fri Aug 31 14:41:45 2007 +0900
+
+ [MIPS] Update asm string header
+
+ This patches contains several bugfixes and cleanups in the latest upstream:
+
+ - Don't include linux/config.h
+ - Remove buggy inline version of memscan.
+ - Merge with Linux 2.6.11-rc3.
+ - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
+ - Goodbye mips64. 31704 lines of code bite the dust.
+ - Replace extern inline with static inline.
+ - Fix return value of strncpy.
+ - Remove a bunch more "$1" clobbers.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Sep 4 17:31:22 2007 +0200
+
+ Fix do_bootm_linux() so that multi-file images with FDT blob boot.
+
+ Fix incorrect blob address calculation in do_bootm_linux() that prevents
+ booting the kernel from a multi-file image (kernel + initrd + blob).
+
+ Also, make minor updates to the U-Boot's output and to the coding style.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 041a2554ad619e80dce520c1a33210affcb6a3f2
+Author: Gary Jennejohn <gary.jennejohn@freenet.de>
+Date: Fri Aug 31 14:29:04 2007 +0200
+
+ Add support for Sil680 IDE controller.
+
+ o add drivers/sil680.c to support the Sil680 IDE-controller.
+ o drivers/Makefile: add sil680.o.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit e79021223bc339df655e360645a52c457a74b067
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Sep 6 09:47:40 2007 -0600
+
+ bootm/fdt: Only process the fdt if an fdt address was provided
+
+ Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
+ kernels using the board info structure (instead of passing a device tree)
+ This change allows the old style booting to be used if the fdt argument
+ was not passed to 'bootm'.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Sep 6 09:46:23 2007 -0600
+
+ Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
+
+ Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
+
+ Tested on: lite5200b
+
+ Note: the fixup functions have not been moved to a common place. This
+ patch is targeted for immediate merging as in solves a build issue, but
+ the final name/location of the fixups is still subject to debate. I
+ propose to merge this now, and move the fixups in the next merge window
+ to be usable by all targets.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 41bb76e941929f54a73206fb132f7a4c275543a3
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Thu Sep 6 09:46:17 2007 -0600
+
+ libfdt: add convenience function fdt_find_and_setprop()
+
+ Given the path to a node, fdt_find_and_setprop() allows a property value
+ to be set directly.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 80767a6cead9990d9e77e62be947843c2c72f469
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed Sep 5 16:04:41 2007 +0100
+
+ Changed API name to coloured_led.h
+ Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
+ Tidied other cpu/arm920t/start.S code
+
+commit 56a9270521baaa00e12639a978302a67f61ef060
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Aug 30 16:18:18 2007 -0500
+
+ Fix ULI RTC support on MPC8544 DS
+
+ The RTC on the M1575 ULI chipset requires a dummy read before
+ we are able to talk to the RTC. We accomplish this by adding a
+ second memory region to the PHB the ULI is on and read from it.
+
+ The second region is added to maintain compatiabilty with Linux's
+ view of the PCI memory map.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Aug 30 01:58:48 2007 -0500
+
+ ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
+
+ pcie is now differentiated from pci. Add 8641 bus-range updates.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 16:18:38 2007 +0100
+
+ Add coloured led interface for ARM boards.
+ Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
+
+commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 14:49:28 2007 +0100
+
+ Move include/led.h to board/at91rm9200dk
+
+commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 14:25:51 2007 +0100
+
+ Ran Lindent on drivers/at45.c
+
+commit 557ab89d294f08dd532f21d19861b40093200a33
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Sep 4 14:23:50 2007 +0100
+
+ Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
+
+commit 81b73dec16fd1227369a191e725e10044a9d56b8
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Fri Aug 31 15:21:46 2007 +0200
+
+ ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
+
+ The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
+ set to non-zero, because it doesn't support MRM (memory-read-
+ multiple) correctly. We now added the possibility to configure
+ this register in the board config file, so that the default value
+ of 8 can be overridden.
+
+ Here the details of this patch:
+
+ o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
+ board-specific settings. As an example the sequoia board requires 0.
+ Idea from Stefan Roese <sr@denx.de>.
+ o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
+ PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
+ o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
+ CFG_PCI_CACHE_LINE_SIZE to 0.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 60174746c668b309378a91488dded898e9553eae
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Aug 31 10:01:51 2007 +0200
+
+ Fix TFTP OACK code for short packets.
+
+ The old code had a loop limit overflow bug which caused a semi-
+ infinite loop for small packets, because in "i<len-8", "i" was signed,
+ but "len" was unsigned, and "len-8" became a huge number for small
+ values of "len".
+
+ This is a workaround which replaces broken commit 8f1bc284.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
+Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+Date: Thu Aug 30 15:03:05 2007 +0200
+
+ Reduce BOOTDELAY variable to 1 second by default for STK1002
+
+ Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
+Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+Date: Thu Aug 30 15:03:04 2007 +0200
+
+ Remove double quotation marks around MAC address for STK1002
+
+ Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit ff13ac8c7bbebb238e339592de765c546dba1073
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 30 14:42:15 2007 +0200
+
+ Backout commit 8f1bc284 as it causes TFTP to fail.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Aug 30 02:26:17 2007 -0500
+
+ Revert "Fix MPC8544DS PCIe3 scsi."
+
+ This reverts commit 9468e680.
+ Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Wed Aug 29 18:26:24 2007 -0600
+
+ tftp: don't implicity trust the format of recevied packets
+
+ The TFTP OACK code trusts that the incoming packet is formated as
+ ASCII text and can be processed by string functions. It also has a
+ loop limit overflow bug where if the packet length is less than 8, it
+ ends up looping over *all* of memory to find the 'blksize' string.
+
+ This patch solves the problem by forcing the packet to be null
+ terminated and using strstr() to search for the sub string.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Aug 29 16:31:18 2007 +0200
+
+ ppc4xx: Change lwmon5 default environment to support Linux RTC
+
+ The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
+ to supply the RTC I2C address as bootline parameter. This patch
+ adds support for this rtc probing parameter to the bootargs:
+
+ "rtc-pcf8563.probe=0,0x51"
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 29 09:06:05 2007 -0500
+
+ sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
+
+ this had slipped through the cracks, since the sbc board was added
+ after I wrote the original patch to remove all these symbols, and
+ before it was merged.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Aug 29 14:05:30 2007 +0200
+
+ Add mii_init() prototype
+
+ to get rid of a *lot* of compiler warnings.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Aug 29 13:35:03 2007 +0200
+
+ Disable network support on cmi_mpc5xx board
+
+ ..because it caused compiler errors and there seems to be no
+ board maintainer to take care of this.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Aug 20 09:44:00 2007 -0500
+
+ Fix MPC8544DS PCIe3 scsi.
+
+ <ed.swarthout@freescale.com>
+
+ The problem is pciauto_setup_device() getting called from fsl_pci_init.c
+ is allocating memory space it doesn't need.
+
+ Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Tue Aug 21 09:38:59 2007 -0500
+
+ 8548cds fixes
+
+ Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
+ correct consoledev needed for linux boot.
+ Standardize on fdt{file,addr} var to hold dtb file name.
+
+ Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Aug 23 15:20:54 2007 -0400
+
+ Enable L2 cache for MPC8568MDS board
+
+ The L2 cache size is 512KB for 8568, print out the correct informaiton.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Wed Aug 22 17:54:49 2007 +0800
+
+ Remove the bios emulator binary files from MAI board
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Aug 21 17:00:17 2007 -0500
+
+ support board vendor-common makefiles
+
+ if a board/$(VENDOR)/common/Makefile exists, build it.
+
+ also add the first such case, board/freescale/common/Makefile, to
+ handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
+ dictated by board configuration.
+
+ thusly get rid of alternate build dir errors such as:
+
+ FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
+
+ by putting the common/ mkdir command in its proper place (the common
+ Makefile). Common bits from existing individual board Makefiles have
+ been removed.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
+Author: stefano babic <sbabic@denx.de>
+Date: Tue Aug 21 15:52:33 2007 +0200
+
+ Fix: TFTP is not working on little endian systems
+
+ TFTP does not work anymore after multicast tftp
+ patch was applied on little endian systems.
+ This patch fix it.
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 5f470948570526e9186f053a3003da7719604e90
+Author: stefano babic <sbabic@denx.de>
+Date: Tue Aug 21 15:50:33 2007 +0200
+
+ Fix MAC address setting in DM9000 driver.
+
+ The logic to check if there is a correct MAC address in the DM9000
+ EEPROM, added in the last patch, is wrong. Now the MAC address is
+ always taken from the environment, even if a suitable MAC is present
+ in the EEPROM.
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Tue Aug 21 12:40:34 2007 +0200
+
+ MPC5xxx: fix some compiler warnings in USB code
+
+ Fix the following warnings:
+ - usb.c:xx: warning: function declaration isn't a prototype
+ - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
+ from pointer wihtout a cast
+
+ Signed-off-by: Martin Krause <martin.krase@tqs.de>
+
+commit 16e23c3f5dab6937f5109365416808c7f15c122b
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Mon Aug 20 23:55:33 2007 -0500
+
+ fsl_pci_init - Remove self PCSRBAR allocation
+
+ CPU physical address space was being wasted by allocating a
+ PCSRBAR PCI inbound region to it's memory space.
+
+ As a rule, PCSRBAR should be left alone since it does not affect
+ transactions from self and other masters may have changed it.
+
+ Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
+
+commit 0e700ce03a23bb1921149bc77008ace7103d5289
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Aug 20 13:56:47 2007 +0200
+
+ Fix compiler warning in include/s3c2410.h
+
+ This patch fixes the "type qualifiers ignored on fuction return tpye"
+ warning for include/s3c2410.h
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Mon Aug 20 07:09:05 2007 +0200
+
+ Fix compilation error for omap2420h4_config.
+
+ omap2420h4 switched to cfi, so remove old (already disabled) flash.c
+ and flash_probe() calls in env_flash.c.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 10 14:34:14 2007 -0500
+
+ fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
+
+ and make some minor corrections to the FDT part of the README.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Aug 29 01:32:05 2007 +0200
+
+ Minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Tue Aug 28 17:40:33 2007 +0200
+
+ [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit f98984cb194bb34dbe1db9429d3b51133af30d07
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Tue Aug 28 17:39:14 2007 +0200
+
+ IDE: - make ide_inb () and ide_outb () "weak", so boards can
+ define there own I/O functions.
+ (Needed for the pcs440ep board).
+ - The default I/O Functions are again 8 Bit accesses.
+ - Added CONFIG_CMD_IDE for the pcs440ep Board.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
+Author: Semih Hazar <semih.hazar@indefia.com>
+Date: Mon Aug 20 19:00:01 2007 +0300
+
+ AVR32: Change prototype of memset
+
+ Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9c02defc29b57945b600714cf61ddfd02b02fb14
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Sat Aug 25 05:07:16 2007 +0200
+
+ POST: limit memory test area to not touch global data anymore
+
+ As experienced on lwmon5, on some boards the POST memory test can
+ corrupt the global data buffer (bd). This patch fixes this issue
+ by checking and limiting this area.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 75e1a84d483e36be10e206e539b028c4889e1158
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 24 15:41:42 2007 +0200
+
+ ppc4xx: Add RTC POST test to lwmon5 board configuration
+
+ Since this RTC POST test is taking quite a while to complete
+ it's only initiated upon special keypress same as the complete
+ memory POST.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d7bfa620037a6d2210159387571bdf93aa32c162
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 24 15:19:10 2007 +0200
+
+ ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Aug 23 11:02:37 2007 +0200
+
+ ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
+
+ This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
+ board. Now the "eeprom" command can be used to read/write from/to this
+ device. Additionally a new command was added "eepromwp" to en-/disable
+ the write-protect of this 2nd EEPROM.
+
+ The 1st EEPROM is not affected by this write-protect command.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c64fb30e4c5976007d56fc1789c7a0666082b536
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Aug 22 08:56:09 2007 +0200
+
+ ppc4xx: Remove unused option CFG_INIT_RAM_OCM
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 21 16:27:57 2007 +0200
+
+ ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
+
+ This patch adds support for the matrix keyboard on the lwmon5 board.
+ Since the implementation in the dsPCI is kind of compatible with the
+ "old" lwmon board, most of the code is copied from the lwmon
+ board directory.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 19 10:27:34 2007 +0200
+
+ Fix some build errors.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Aug 18 22:00:38 2007 +0200
+
+ Update CHANGELOG.
+
+commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Aug 16 22:52:39 2007 -0500
+
+ lib_ppc: make board_add_ram_info weak
+
+ platforms wishing to display RAM diagnostics in addition to size,
+ can do so, on one line, in their own board_add_ram_info()
+ implementation.
+
+ this consequently eliminates CONFIG_ADD_RAM_INFO.
+
+ Thanks to Stefan for the hint.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Fri Aug 17 12:43:44 2007 +0900
+
+ PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
+
+ This patch has been sent on:
+ - 6 Jun 2007
+
+ Many users of PCI config read routines tend to ignore the function
+ ret value, and are only concerned about the contents of *val. Based
+ on this, pci_hose_read_config_{byte,word}_via_dword should initialize
+ the *val on dword read error.
+
+ Without this fix, for example, we'll go on scanning bus with vendor or
+ header_type uninitialized. This brings many unnecessary config trials.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Aug 18 14:37:52 2007 +0200
+
+ ColdFire: Fix some remaining problems with CFG_CMD_
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8280f6a1c43247616b68224675188e5ccd124650
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Aug 18 14:33:02 2007 +0200
+
+ Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Aug 16 19:23:50 2007 -0500
+
+ ColdFire: Add M5235EVB Platform for MCF523x
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 17 09:30:00 2007 -0500
+
+ mpc83xx: fix typo in DDR2 programming
+
+ introduced in the implement board_add_ram_info patch as I was cleaning out the
+ magic numbers. sorry.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e58fe95784d2514fc9c21028dc59f2b319a35d80
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Aug 16 22:53:09 2007 -0500
+
+ mpc83xx: move freescale boards to boards/freescale
+
+ includes build fixes.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Aug 16 22:52:59 2007 -0500
+
+ mpc83xx: suppress unused variable 'val8' warning
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit bbea46f76f767b919070b4829bf34c86bd223248
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Aug 16 22:52:48 2007 -0500
+
+ mpc83xx: implement board_add_ram_info
+
+ add board_add_ram_info, to make memory diagnostic output more
+ consistent. u-boot banner output now looks like:
+
+ DRAM: 256 MB (DDR1, 64-bit, ECC on)
+
+ and for boards with SDRAM on the local bus, a line such as this is
+ added:
+
+ SDRAM: 64 MB (local bus)
+
+ also replaced some magic numbers with their equivalent define names.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 14778585d1389d86d5846efec29e5fce892680ce
+Author: Tony Li <tony.li@freescale.com>
+Date: Fri Aug 17 10:35:59 2007 +0800
+
+ mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
+
+ The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
+ And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
+
+ Signed-off-by Tony Li <tony.li@freescale.com>
+
+commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Aug 16 15:05:11 2007 -0500
+
+ ColdFire: Add M54455EVB for MCF5445x
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Aug 16 13:20:50 2007 -0500
+
+ ColdFire: Add M5253EVBE platform for MCF52x2
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit a605aacd8324094199402816cc6d9124aba57b8d
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Aug 16 05:04:31 2007 -0500
+
+ ColdFire: Add M5249EVB platform for MCF52x2
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 20:32:06 2007 -0500
+
+ ColdFire: Update Freescale MCF52x2 platforms
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 19:55:10 2007 -0500
+
+ ColdFire: Update EB+MCF-EV123 platform
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 19:46:38 2007 -0500
+
+ ColdFire: update TASREG platform for MCF52x2
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 19:45:51 2007 -0500
+
+ ColdFire: update r5200 platform for MCF52x2
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 19:43:20 2007 -0500
+
+ ColdFire: idmr platform MCF52x2 update
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 19:41:06 2007 -0500
+
+ ColdFire: cobra5272 platform for MCF52x2 update
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 56115665b4a64c10c01440c57749b265e0908fa4
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 19:38:15 2007 -0500
+
+ ColdFire: MCF52x2 Header files update
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 19:21:21 2007 -0500
+
+ ColdFire: MCF52x2 update
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 18:46:11 2007 -0500
+
+ ColdFire: MCF5329 update cache
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 7171977fb8fd77cfb6676953fa9a05789c450513
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 15:40:20 2007 -0500
+
+ ColdFire: MCF5329 header file clean up
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 15 15:39:17 2007 -0500
+
+ ColdFire: MCF5329 Update and cleanup
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 10327dc5541f947c0cf7e31fef86c4706169607a
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Aug 16 16:35:02 2007 -0500
+
+ Add CONFIG_HAS_ETH0 to all boards with TSEC
+
+ The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
+ to update TSEC1's device-tree node, so we need to add it
+ to all the boards with TSECs. Do this for 83xx and 86xx, too,
+ since they will eventually do something similar.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Aug 16 15:05:04 2007 -0500
+
+ Update MPC8544 DS PCI memory map
+
+ The PCIe bus that the ULI M1575 is connected to has no possible way of
+ needing more than the fixed amount of IO & Memory space needed by the ULI.
+
+ So make it use far less IO & memory space and have it use the shared LAW. This
+ free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
+ by each bus.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ea5877e31ed63ade948fd1293895ec23fe01472e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Aug 16 11:01:21 2007 -0500
+
+ Fix up some fdt issues on 8544DS
+
+ It looks like we had a merge issue that duplicated a bit of code
+ in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
+ the MAC address properly set in the device tree on boot for TSEC1
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Thu Aug 16 15:16:03 2007 +0200
+
+ PPC4xx:HCU4/5 cleanup
+
+ Minor cleanups to confirm to the u-boot coding style.
+ Some german expressions -> english.
+ HCU5 enforces a unique IP adress for a given slot in the rack.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Thu Aug 16 15:16:02 2007 +0200
+
+ PPC4xx:HCU4/5 cleanup ecc/sdram init
+
+ Make ecc initialisation robust, as DDR2-ECC errors may be generated
+ while zeroing the RAM.
+
+ Return 16 bytes (a cacheline) less than the available memory, as the
+ board and/or PPC440EPx might have problems accessing the last bytes.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit d35b508a55508535b6e8445b718585d27df733d3
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 15 22:29:56 2007 -0500
+
+ fdt: suppress unused variable 'bd' warning
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 82bd9ee77490588d4da785d75829ca63d0176baf
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Aug 15 20:06:50 2007 -0500
+
+ Fix warnings from of_data copy fix
+
+ Forgot to cast of_flat_tree to ulong.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 7613afda77d5eec0f47d303025b0c661b70e4c73
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Aug 15 20:03:44 2007 -0500
+
+ Don't wait for disconnected TSECs
+
+ The TSEC driver's PHY code waits a long time for autonegotiation to
+ complete, even if the link is down. The PHY knows the link is
+ down or up before autonegotiation completes, so we can short-circuit
+ the process if the link is down.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit b96c83d4ae475a70ef2635cd0e748174c44c8601
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Aug 15 20:03:34 2007 -0500
+
+ Fix numerous bugs in the 8568 UEC support
+
+ Actually, fixed a large bug in the UEC for *all* platforms.
+ How did this ever work?
+
+ uec_init() did not follow the spec for eth_init(), and returned
+ 0 on success. Switch it to return the link like tsec_init()
+ (and 0 on error)
+
+ The immap for the 8568 was defined based on MPC8568, rather than
+ CONFIG_MPC8568
+
+ CONFIG_QE was off
+
+ CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
+
+ Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
+ enabled
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 3a79013e2adda53332dfd0b511066a805e929a9d
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Aug 15 20:03:25 2007 -0500
+
+ Define tsec flag values in config files
+
+ The tsec_info structure and array has a "flags" field for each
+ ethernet controller. This field is the only reason there are
+ settings. Switch to defining TSECn_FLAGS for each controller
+ in the config header, and we can greatly simplify the array, and
+ also simplify the addition of future boards.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit ec7238229507e7f47533a611ea8c53319d234cf3
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Aug 15 20:03:13 2007 -0500
+
+ Add support for building all boards with a TSEC
+
+ Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
+ Now we can do a MAKEALL test on all of them!
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Aug 15 17:30:56 2007 -0500
+
+ Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
+
+ The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
+ neglected to *also* put the code inside the similar #ifdef
+ for CONFIG_OF_FLAT_TREE.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 78f9fef7f406078c8bf7191e665a73f795157746
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Aug 15 15:46:46 2007 -0500
+
+ mpc885ads: Don't define CONFIG_BZIP2.
+
+ bzip2 requires a significant chunk of malloc space, and there isn't
+ enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
+ and a downloaded image at 0x400000.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 002275a3ed8b114885f6702d6d544d0780dfe689
+Author: Michal Simek <Monstr@seznam.cz>
+Date: Thu Aug 16 08:54:10 2007 +0200
+
+ Bios emulator - fix microblaze toolchain problem
+
+ microblaze CPU have problem with bios_emulator code.
+ Microblaze toolchain doesn't support PRAGMA PACK.
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 16 11:51:04 2007 +0200
+
+ Minor Coding Style fix; Update CHANGELOG file.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Aug 16 11:21:49 2007 +0200
+
+ ppc4xx: Remove #warning in esd auto_update.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2d78074d2e806edc380c1464eb9e5df335ece65e
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 22 17:32:28 2007 +0200
+
+ ppc7xx: Update CPCI750 board
+
+ This small CPCI750 update extends the board specific command
+ "show_config" to display the Marvell strapping registers and
+ extends the PCI IDE controller.
+
+ Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Thu Aug 16 10:46:28 2007 +0200
+
+ [FIX] Changes for bios_emulator code for others architecture
+
+commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
+Author: Michal Simek <monstr@monstr.eu>
+Date: Thu Aug 16 10:45:09 2007 +0200
+
+ [FIX] Remove unused include file
+
+commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Aug 16 10:18:33 2007 +0200
+
+ ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Aug 16 09:54:51 2007 +0200
+
+ Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 02ba7022f62bb75908296c58c63866e1d294b69a
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Aug 16 09:52:29 2007 +0200
+
+ ppc4xx: Update Sequoia/Rainier bootstrap command
+
+ As suggested by David Mitchell, here an update for the Sequoia/Rainier
+ bootstrap command.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 35cc4e4823668e8745854899cfaedd4489beb0ef
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 15 22:30:39 2007 -0500
+
+ mpc83xx: enable libfdt by default on freescale boards
+
+ this enables libfdt code by default for the
+ freescale mpc8313erdb, mpc832xemds, mpc8349emds,
+ mpc8349itx and gp boards.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3fde9e8b22cfbd7af489214758f9839a206576cb
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 15 22:30:33 2007 -0500
+
+ mpc83xx: migrate remaining freescale boards to libfdt
+
+ this adds libfdt support code for the freescale
+ mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
+ and gp boards.
+
+ Boards remain compatible with OF_FLAT_TREE.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 15 22:30:26 2007 -0500
+
+ mpc83xx: move common /memory node update mechanism to cpu.c
+
+ also adds common prototypes to include/common.h.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 15 22:30:19 2007 -0500
+
+ mpc83xx: remaining 8360 libfdt fixes
+
+ PCI clocks and QE frequencies weren't being updated, and the core clock
+ was being updated incorrectly. This patch also adds a /memory node if
+ it doesn't already exist prior to update.
+
+ plus some cosmetic trimming to single line comments.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 15 22:30:12 2007 -0500
+
+ mpc83xx: fix UEC2->1 typo in libfdt setup code
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 15 22:30:05 2007 -0500
+
+ mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
+
+ and reorder the existing 83xx maintainers alpha.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5b4de9309d7a03aa1db2e5391ab696363391f460
+Author: Michal Simek <monstr@monstr.eu>
+Date: Wed Aug 15 21:15:05 2007 +0200
+
+ [FIX] Resolve problem with warnings
+ microblaze toolchain don't support PRAGMA PACK.
+
+commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
+Author: Michal Simek <monstr@monstr.eu>
+Date: Wed Aug 15 21:05:07 2007 +0200
+
+ [FIX] Correction command setting for Microblaze boards
+
+commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
+Author: Michal Simek <monstr@monstr.eu>
+Date: Wed Aug 15 21:03:41 2007 +0200
+
+ [FIX] Correction command definition
+
+commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Aug 15 11:55:35 2007 -0500
+
+ 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
+
+ Remove a leftover in net/tftp.c while we're at it.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Aug 15 12:20:40 2007 -0500
+
+ Move the MPC8641HPCN board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8662577fe36fdb6a44b55b998d9daac6392a736a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Aug 15 11:46:22 2007 -0500
+
+ 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
+
+ Remove a leftover in net/tftp.c while we're at it.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 210f463c71917b7a4495c2103c228b9c179ae64d
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Wed Aug 15 11:13:15 2007 -0400
+
+ Fix where the #ifdef CFG_BOOTMAPSZ is placed.
+
+ Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
+ interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
+ when it should have gone inside of the conditional. As a result, it
+ broke non-LIBFDT board builds.
+
+ Also added a missing "not." to the comment.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 0e19209767194a97cec6d93dba9e64d1da8d548e
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Wed Aug 15 12:14:23 2007 +0200
+
+ PPC4xx:HCU4/5-Board fix compile warning
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Tue Aug 14 14:06:45 2007 -0500
+
+ Fix malloc size error in ahci_init_one.
+
+ Typically this causes scsi init to corrupt the
+ devlist and break the coninfo command.
+ Fix a compiler size warning.
+
+ Signed-off-by: Jason Jin <jason.jin@freescale.com>
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit b361acd64fd2525c081b9b288b0804efe209c0e9
+Author: ksi@koi8.net <ksi@koi8.net>
+Date: Tue Aug 14 10:02:16 2007 -0700
+
+ TI DaVinci - fix unsupported %hhx format
+
+ Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
+
+commit f01dbb5424a81453c81190dd30e945891466f621
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 14 18:42:36 2007 +0200
+
+ Coding style cleanup. Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Aug 14 10:32:59 2007 -0500
+
+ Fix initrd/dtb interaction
+
+ The original code would wrongly relocate the blob to be right before
+ the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
+ if it is defined. So we make two changes:
+
+ 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
+
+ 2) If the blob is being relocated, relocate it before kbd, not initrd
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit e54b970173769307a116bd34028b6d0c2eea2a4e
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Aug 14 15:40:00 2007 +0100
+
+ Supply spi interface in at45.c
+
+commit 4ce846ec59f36b85d6644a769690ad3feb667575
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 14 15:12:01 2007 +0200
+
+ POST: Fix merge problem
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 14 15:03:17 2007 +0200
+
+ Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 779e975117a75e91fcebe226a63104dbfb924ab1
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 14 14:44:41 2007 +0200
+
+ ppc4xx: Add initial Zeus (PPC405EP) board support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c5a172a5fd636c12467429e3f7910e53773979c6
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 14 14:41:55 2007 +0200
+
+ POST: Add option for external ethernet loopback test
+
+ When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
+ is not done using an internal loopback connection, but by assuming
+ that an external loopback connector is plugged into the board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit eb2b4010ae426245172988804ee8d9193fb41038
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 14 14:39:44 2007 +0200
+
+ POST: Add ppc405 support to cache and UART POST
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Aug 14 10:46:32 2007 +0100
+
+ Replace lost end of at45.c.
+
+commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Aug 14 10:30:06 2007 +0100
+
+ Update Makefiles for merged and split at45.c.
+
+commit 3454cece2db57cb9eb7087995f7e73066a163f71
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Aug 14 10:21:06 2007 +0100
+
+ Delete the merged files.
+
+commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Aug 14 10:14:05 2007 +0100
+
+ Add the files.
+
+commit d4fc6012fd0a5c211b825691f44b06f8032c0551
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Aug 14 10:10:52 2007 +0100
+
+ Add MACH_TYPE records for several AT91 boards.
+ Merge to two at45.c files into a common file, split to at45.c and spi.c
+ Fix spelling error in DM9161 PHY Support.
+ Initialize at91rm9200 board (and set LED).
+ Add PIO control for at91rm9200dk LEDs and Mux.
+ Change dataflash partition boundaries to be compatible with Linux 2.6.
+
+ Signed-off-by: Peter Pearse <peter.pearse@arm.com>
+ Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
+
+commit 4ef35e53c693556c54b0c22d6f873de87bade253
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 14 09:54:46 2007 +0200
+
+ Coding style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
Author: Wolfgang Denk <wd@denx.de>
Date: Tue Aug 14 09:47:27 2007 +0200
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Aug 13 09:05:33 2007 +0200
+
+ ppc4xx: Fix problem in PLL clock calculation
+
+ This patch was originall provided by David Mitchell <dmitchell@amcc.com>
+ and fixes a bug in the PLL clock calculation.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Aug 12 21:34:50 2007 +0200
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
+commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 10 10:42:25 2007 +0200
+
+ Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
Author: Dirk Behme <dirk.behme@googlemail.com>
Date: Thu Aug 2 17:42:08 2007 +0200
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:31:22 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:30:33 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit e8397fc78c9394d71de233a4d810fbc9047e4c76
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:38:26 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: common files
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:28:44 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: make related
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 137fdd9f474ecb853efdace5200576308c67f18d
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:28:03 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:27:15 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:25:31 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: READMEs
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Jul 27 11:37:40 2007 +0200
+
+ Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
+
+ This series of patches adds support for 2 boards from Netstal Maschinen.
+
+ The HCU4 has a PPC405Gpr and
+ the HCU5 has a PPC440EPX.
+
+ The HCU4 has a somehow complicated flash setup, as the booteprom is
+ only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
+ elegant solution.
+
+ The HCU5 has only a booteprom as the whole code will be downloaded from a
+ different board which has HD, CD-ROM, etc and where all code is stored.
+
+ This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
+ Thanks them a lot.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 10 08:42:55 2007 +0200
+
+ ppc4xx: Update lwmon5 POST configuration
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Aug 10 08:25:22 2007 +0200
+
+ POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
+
+ The patch adds support for UART POST on ppc44x-based boards with no
+ external serial clocks installed.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
Author: Kim Phillips <kim.phillips@freescale.com>
Date: Mon Aug 6 18:18:34 2007 -0500
Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Aug 8 09:54:26 2007 +0200
+
+ Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a41de1f0d373e09c782dea558385a06247111ba5
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 05:15:18 2007 -0500
+
+ Port enabled for I2C signals and chipselects port configuration.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 04:31:18 2007 -0500
+
+ Added NAND support
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 04:11:20 2007 -0500
+
+ Added I2C support
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 99c03c175d2689093176facf17c58ce2cb320001
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 03:58:52 2007 -0500
+
+ Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 03:55:21 2007 -0500
+
+ Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 03:43:30 2007 -0500
+
+ Moved sync() from board file to include/asm-m68k/io.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 03:30:44 2007 -0500
+
+ Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 9998bd37ead85e93953559720710d3b0685c81e6
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Aug 5 03:19:10 2007 -0500
+
+ Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
Author: Jason Jin <Jason.jin@freescale.com>
Date: Tue Aug 7 16:17:06 2007 +0800
Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit 706714d97a0d08d59eda4de2268c39f504688329
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Aug 6 23:41:53 2007 +0200
+
+ [FIX] remove cute code
+
+commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Aug 6 23:35:26 2007 +0200
+
+ [FIX] Fix romfs code
+
+commit ab4b956d3143f8f8174089053f5dfabbb04762b0
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Aug 6 23:31:49 2007 +0200
+
+ [FIX] Coding style cleanup - Wolfgang's suggestions
+
commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Aug 6 23:21:05 2007 +0200
Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit 537223afa61f64480df31ce440a9cb386df4a814
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Aug 6 21:10:17 2007 +0200
+
+ ppc4xx: Update AMCC Bamboo README doc/README.bamboo
+
+ As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
+ here an updated Bamboo README.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Aug 6 02:17:36 2007 +0200
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
+commit a274ca4f6d68830e7c916f897561cff8c4101c38
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Aug 5 22:33:05 2007 +0200
+
+ [FIX] Coding style cleanup
+
+commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Aug 5 16:13:31 2007 +0200
+
+ [FIX] Xilinx Uartlite driver
+ Because PPC405 can use UARTLITE serial interface and
+ Microblaze can use Uart16550 serial interface not only Uartlite.
+
+commit 98889edd50aadf862071eb5664747ad0d568a20e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Aug 5 15:54:53 2007 +0200
+
+ [FIX] Change configuration for XUPV2P Microblaze board
+
+commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Aug 5 15:53:50 2007 +0200
+
+ [PATCH] Added support for Xilinx Emac community driver
+
commit 86b116b1b1e165ca4840daefed36d2e3b8460173
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Fri Aug 3 12:08:16 2007 +0200
Minor cleanup of <board>_nand build rules.
+commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Aug 2 08:33:56 2007 +0200
+
+ ppc4xx: Code cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c92409812206ac67a7fa7aae298539a9c3804a46
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Jul 31 18:51:48 2007 +0200
+
+ [ppc440SPe] Graceful recovery from machine check during PCIe configuration
+
+ During config transactions on the PCIe bus an attempt to scan for a
+ non-existent device can lead to a machine check exception with certain
+ peripheral devices. In order to avoid crashing in such scenarios the
+ instrumented versions of the config cycle read routines are introduced, so
+ the exceptions fixups framework can gracefully recover.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit dec99558b9ea75a37940d07f41a3565a50b54ad1
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Tue Jul 31 18:19:54 2007 +0200
+
+ [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
+
+ This brings back separate settings for PCIe bus numbers depending on chip
+ revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
+ commit. 440SPe rev. A does NOT work properly with the same settings as for
+ the rev. B (no devices are seen on the bus during enumeration).
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
Author: Wolfgang Denk <wd@denx.de>
Date: Thu Aug 2 00:48:45 2007 +0200
Fix build errors and warnings / code cleanup.
- Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
+Author: Eugene OBrien <eugene.obrien@advantechamt.com>
+Date: Tue Jul 31 10:24:56 2007 +0200
+
+ ppc4xx: Update AMCC Bamboo 440EP support
+
+ Changed storage type of cfg_simulate_spd_eeprom to const
+ Changed storage type of gpio_tab to stack storage
+ (Cannot access global data declarations in .bss until afer code relocation)
+
+ Improved SDRAM tests to catch problems where data is not uniquely addressable
+ (e.g. incorrectly programmed SDRAM row or columns)
+
+ Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
+ Fixed AM29LV320DT (OpCode Flash) sector map
+
+ Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 31 08:37:01 2007 +0200
+
+ ppc4xx: Update 440EPx lwmon5 board support
+
+ - Clear ECC status regs after ECC POST test
+ - Set dcbz for ECC generation with caches enabled as default
+ - Code cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 30 11:04:57 2007 +0200
+
+ ppc4xx: Only print ECC related info when the error bis are set
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e36220a4baf1f188ba60f17e9d0f043069b1362a
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jul 27 16:44:31 2007 +0200
+
+ new FPGA image for PLU405 board
+
+ new FPGA image for PLU405 board with improved CompactFlash timing
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
Author: Rafal Jaworowski <raj@semihalf.com>
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+commit d4024bb72dd81695ec099b2199eda0d27c623e62
+Author: John Otken <john@softadvances.com>
+Date: Thu Jul 26 17:49:11 2007 +0200
+
+ ppc4xx: Add support for AMCC 405EP Taihu board
+
+ Signed-off-by: John Otken <john@softadvances.com>
+
+commit b66091de6c7390620312c2501db23d8391e7cabb
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Jul 26 15:08:01 2007 +0200
+
+ ppc4xx: lwmon5: Update Lime initialization
+
+ Change Lime SDRAM initialization to now support 100MHz and
+ 133MHz (if enabled). Also the framebuffer is initialized to
+ display a blue rectangle with a white border.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9f24a808f17fc0f37b7fb4805f734741335caecc
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 24 09:52:52 2007 +0200
+
+ ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
+
+ The used Intel NOR FLASH chips have internally two dies, and are now
+ treated as two seperate chips.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit aedf5bde179ecfbd0a96130d18996a96518b785f
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 24 07:20:09 2007 +0200
+
+ ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
+
+ As suggested by Hakan Eryigit, here an updated setup for the lwmon5
+ interrupt controller.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a71d96eac8130b53a91f93cd10c70fca0db18d52
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 20 15:03:44 2007 +0200
+
+ ppc4xx: Fix bug with default GPIO output value
+
+ As spotted by Matthias Fuchs, the default output values for all GPIO1
+ outputs were not setup correctly. This patch fixes this issue.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 531e3e8b831f357056448fa573137d5fb37000fd
+Author: Pavel Kolesnikov <concord@emcraft.com>
+Date: Fri Jul 20 15:03:03 2007 +0200
+
+ POST: Add ECC POST for the lwmon5 board
+
+ This patch adds ECC Post test for the Lwmon5 board based
+ on PPC440EPx to U-Boot.
+
+ Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
+ Acked-by: Yuri Tikhonov <yur@emcraft.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
commit cc3023b9f95d7ac959a764471a65001062aecf41
Author: Rafal Jaworowski <raj@semihalf.com>
Date: Thu Jul 19 17:12:28 2007 +0200
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 16 13:11:12 2007 +0200
+
+ Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 16 10:02:12 2007 +0200
+
+ ppc4xx: Code cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 16 10:01:38 2007 +0200
+
+ ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 16 10:00:43 2007 +0200
+
+ ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
+
+ The new boardspecific DDR2 controller configuration is used for the Yucca
+ board. Now the Yucca board with 440SPe Rev. A chips is also supported.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 16 09:57:00 2007 +0200
+
+ ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
+
+ The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
+ support non default, boardspecific DDR(2) controller configuration.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5743a9207a370b90f09b20ebd61167c806b937f3
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 16 08:53:51 2007 +0200
+
+ ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
+
+ The new function remove_tlb() can be used to remove the TLB's used to
+ map a specific memory region. This is especially useful for the DDR(2)
+ setup routines which configure the SDRAM area temporarily as a cached
+ area (for speedup on auto-calibration and ECC generation) and later
+ need this area uncached for normal usage.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jul 16 00:31:07 2007 +0200
+
+ [PATCH] Support for Xilinx EmacLite controller
+
commit 3a6cab844cf74f76639d795e0be8717e02c86af7
Author: Wolfgang Denk <wd@denx.de>
Date: Sat Jul 14 22:51:02 2007 +0200
Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Jul 14 13:11:28 2007 +0200
+
+ [FIX] support for simply measuring time
+
+commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Jul 14 12:41:23 2007 +0200
+
+ [FS] Added support for ROMFS
+
commit 011595307731a7a67a7445d107c279d031e8ab97
Author: Heiko Schocher <hs@pollux.denx.de>
Date: Sat Jul 14 01:06:58 2007 +0200
[PCS440EP] - fix compile error, if BUILD_DIR is used
+commit 5a2f1098d81ad58b309e5e558d0492643166a799
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Jul 14 00:18:48 2007 +0200
+
+ [PATCH] Support time without timer
+
+commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 13 21:43:55 2007 +0200
+
+ [PATCH] Remove problem with disabled BARREL SHIFTER
+
+commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 13 21:41:44 2007 +0200
+
+ [FIX] correct help for rspr
+
commit fad63407154f46246ce80d53a9c669a44362ac67
Author: Heiko Schocher <hs@pollux.denx.de>
Date: Fri Jul 13 09:54:17 2007 +0200
Signed-off-by: Heiko Schocher <hs@denx.de>
+commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 12 16:32:08 2007 +0200
+
+ ppc4xx: Change receive buffer handling in the 4xx emac driver
+
+ This change fixes a bug in the receive buffer handling, that
+ could lead to problems upon high network traffic (broadcasts...).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
Author: Wolfgang Denk <wd@denx.de>
Date: Thu Jul 12 01:45:34 2007 +0200
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 0dca874db62718e41253659e60f3a1de7eb418ce
+Author: TsiChung <tcliew@Goku.(none)>
+Date: Tue Jul 10 15:45:43 2007 -0500
+
+ Cache update and added CFG_UNIFY_CACHE
+
+ Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
+
+ Signed-off-by: TsiChung <tcliew@Goku.(none)>
+
+commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:36:16 2007 -0500
+
+ Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
+
+ Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:31:25 2007 -0500
+
+ Update header files
+
+ Include immap.h and renamed mcfrtc.h to rtc.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 2870e98ac8e5553e9187b12a47e5f46babb53990
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:29:21 2007 -0500
+
+ Add mcffec_initialize()
+
+ Added mcffec_initialize() in eth_initialize()
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:27:40 2007 -0500
+
+ Update header file and clean up
+
+ Include immap.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 0cee9c66318602c856a899ae5fa7579ccba6443a
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:23:15 2007 -0500
+
+ New uart structure and defines
+
+ Seperated from mcfuart.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit a90e79de8d99e9c9d69d60bfff9f24c337165900
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:22:31 2007 -0500
+
+ New timer structure and defines
+
+ Seperated from mcftimer.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit e04acb2eba4782489417240eff76e20e176aec10
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:21:09 2007 -0500
+
+ Rename mcfrtc to rtc
+
+ Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:17:36 2007 -0500
+
+ Rename mcfserial.c. Update include header
+
+ Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:13:58 2007 -0500
+
+ Header file update, clean up and cache handling
+
+ Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:10:40 2007 -0500
+
+ Create interrupts.c and modify Makefile
+
+ interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit ddd104f1ed655eda50c06ba636237a83ed943f34
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:06:55 2007 -0500
+
+ Enable Icache
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit b9bf3de377b2bae70c983c9b97feae914999e735
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:05:31 2007 -0500
+
+ Update header file and some clean up
+
+ Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 84a015b52ec820a5ae173717d78516de731c89c2
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:03:28 2007 -0500
+
+ Update header file and enable icache
+
+ Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 23:01:22 2007 -0500
+
+ Update header file and removed interrupt_init()
+
+ Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 3b635492c95bd0d6e08f93f699821cba1f602a64
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:57:46 2007 -0500
+
+ Update for flash.o and mii.o
+
+ Removed flash.o and added mii.o
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit c5ded275d839e4ff79f41718d50a835d989f57bc
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:56:19 2007 -0500
+
+ MII functions calls.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 427c814104560e29bda14955c67703245aaaa5b4
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:54:42 2007 -0500
+
+ Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
+
+ The removed MII routines will be placed in mii.c.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:51:05 2007 -0500
+
+ Duplicate code
+
+ There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 2744354a8437b8f78db178e30660215688bff570
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:46:38 2007 -0500
+
+ Seperate old structure defines and new structure defines
+
+ Removed new uart structure and defines to uart.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:45:01 2007 -0500
+
+ Seperate old structure defines and new structure defines
+
+ New timer structure and defines will move to new timer.h
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:42:23 2007 -0500
+
+ Clean up
+
+ Removed whitespace
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:41:24 2007 -0500
+
+ Clean up
+
+ Replaced whitespace with tabs
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:39:07 2007 -0500
+
+ Create new header file and move peripherals base address from configs file to new header file.
+
+ Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
+commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 5 22:24:58 2007 -0500
+
+ Revert file mode
+
+ Changed MAKEALL file mode to executable, removed executable file mode from Makefile
+
+ Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+
commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
Author: Jon Loeliger <jdl@freescale.com>
Date: Tue Jul 10 11:19:50 2007 -0500
Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit c8603cfbd4573379a6076c9c208545ba2bbf019a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 9 11:00:24 2007 +0200
+
+ Small coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Jul 9 10:10:08 2007 +0200
+
+ Migrate esd 405EP boards to new NAND subsystem
+
+ Remove unused CFG_NAND_LEGACY define
+
+ These boards to not have NAND.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Jul 9 10:10:06 2007 +0200
+
+ Migrate esd 405EP boards to new NAND subsystem
+
+ Migrate esd 405EP boards to new NAND subsystem
+
+ -cleanup
+ -use correct io accessors (in/out_be32())
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit e09f7ab5749c345f924da272bea0521a73af5b11
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Jul 9 10:10:04 2007 +0200
+
+ Migrate esd 405EP boards to new NAND subsystem
+
+ This patch prepares the migration from the legacy NAND driver
+ to U-Boot's new NAND subsystem for esd boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
commit c3517f919d0f61650cf3027fd4faf0f631142f6c
Author: Jon Loeliger <jdl@freescale.com>
Date: Sun Jul 8 18:10:08 2007 -0500
Signed-off-by: Jon Loeliger <jdl@freescale.com>
+commit 10e038932f22ee80ebd53de312531e70e6590a2f
+Author: Thomas Knobloch <knobloch@siemens.com>
+Date: Fri Jul 6 14:58:39 2007 +0200
+
+ [NAND] Bad block skipping for command nboot
+
+ The old implementation of command nboot does not support reading the image from
+ NAND flash with skipping of bad blocks. The patch implements a new version of
+ the nboot command: by calling nboot.jffs2 from the u-boot command line the
+ command will load the image from NAND flash with respect to bad blocks (by using
+ nand_read_opts()). This is similar to e.g. the NAND read command: "nand
+ read.jffs2 ...".
+
+ Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 6 12:26:51 2007 +0200
+
+ ppc4xx: Update lwmon5 default environment
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5d187430a055d62f17ca84d75e7245439d1f7e75
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 6 11:48:24 2007 +0200
+
+ ppc4xx: Update lwmon5 board
+
+ Add unlock=yes environment variable to default variables to unlock
+ the CFI flash by default.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
Author: Stefan Roese <sr@denx.de>
Date: Fri Jul 6 09:45:47 2007 +0200
- adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
- minor 4xx cleanup
+commit d677b32855f577ae2690dcd64a172cdd706e0ffc
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Jun 22 10:34:12 2007 +0200
+
+ [patch] add nand_init() prototype to nand.h
+
+ since nand_init() is expected to be called by other parts of u-boot, there
+ should be a prototype for it in nand.h
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
Author: Wolfgang Denk <wd@denx.de>
Date: Wed Jun 20 18:14:24 2007 +0200
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Jun 18 13:50:13 2007 -0500
+
+ Added M5329AFEE and M5329BFEE Platforms
+
+ Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
+ drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
+ include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
+ rtc/mcfrtc.c
+
+ Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
+ common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
+ include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
+ include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
+ include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
+ lib_m68k/time.c, net/eth.c and rtc/Makefile
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Jun 17 19:04:11 2007 +0200
+
+ [fix] email reparation
+
+commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Jun 17 19:03:21 2007 +0200
+
+ [FIX] fix microblaze file permitission
+
commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
Author: Stefan Roese <sr@denx.de>
Date: Fri Jun 15 11:33:41 2007 +0200
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
+Author: Ulf Samuelsson <ulf@atmel.com>
+Date: Thu May 24 12:12:47 2007 +0200
+
+ [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
+
+ Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit d756894722c888d09a9fa1df8323753772d3dcce
Author: Stefan Roese <sr@denx.de>
Date: Thu May 24 09:49:00 2007 +0200
projects / karo-tx-uboot.git / blobdiff