-======================================================================
-Changes since U-Boot 1.1.4:
-======================================================================
+commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 6 15:58:09 2007 +0100
-* Make 4xx bootup message shorter on 440EPx/GRx platforms
- Patch by Stefan Roese, 18 Oct 2006
+ [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
-* Add (preliminary) support for V38B board
+ This patch fixes a problem with an incorrect setup for the refresh
+ timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
-* Add board/cpu specific NAND chip select function to 440 NDFC
- Based on idea and implementation from Jeff Mann
- Patch by Stefan Roese, 20 Oct 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* PPC405EP: Add support for board configuration of CPC0_PCI register
- This is needed to be able to configure PerWE*/PCI_INT* pin as PerWE*
- Patch by Tolunay Orkun, 07 Apr 2006
+commit f16c1da9577f06c5fc08651a4065537407de4635
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 6 15:56:13 2007 +0100
-* PPC405EP: Add CFG_GPIO0_OR, CFG_GPIO0_ODR to setup GPIO completely.
- - Add configuration of Open Drain GPIO Output selection
- - Add configuration of initial value of GPIO output pins
- Patch by Tolunay Orkun, 07 Apr 2006
+ [PATCH] Update ALPR board files
-* Fix spelling; minor code cleanup.
+ This update brings the ALPR board support to the newest version.
+ It also fixes a problem with the NAND driver.
-* Fix JFFS2 compilation problem
- Patch by Stefan Roese, 12 Oct 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Cleanup of NAND update patch (remove changelog from cmd_nand.c)
- Patch by Guido Classen, 10 Oct 2006
+commit cd1d937f90250a32988c37b2b4af8364d25de8ed
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 5 11:46:05 2007 +0100
-* Several improvements to the new NAND subsystem:
- - JFFS2 related commands implemented in mtd-utils style
- - Support for bad blocks
- - Bad block testing commands
- - NAND lock commands
- Please take a look at doc/README.nand for more details
- Patch by Guido Classen, 10 Oct 2006
+ [PATCH] nand: Fix problem with oobsize calculation
-* Define IH_CPU_AVR32
- Make it possible to generate AVR32 uImage files with mkimage and
- make cmd_bootm recognize them.
- Patch by Haavard Skinnemoen, 22 Sep 2006
+ Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
-* Fix buffer overflow problem in ft_build.c
- Patch by Fredrik Roubert, 09 Oct 2006
+ The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
+ returns a 0x15. In the code fragment below bits [1:0] determine the
+ page size, it is ANDed via "(extid & 0x3)" then shifted out. The
+ next field is also ANDed with 0x3. However this is a one bit field
+ as defined in the Hynix and Samsung parts in the 4th ID byte that
+ determins the oobsize, not a two bit field. It works on Samsung as
+ bits[3:2] are 01. However for the Hynix there is a 11 in these two
+ bits, so the oob size gets messed up.
-* Make bootp implementation RFC3046 compliant
- Patch by Joakim Larsson, 27 Jun 2006
+ I checked the correct linux code and the suggested fix from Brian is
+ also available in the linux nand mtd driver.
-* TQM5200: perform POST memory test only on STK52xx carrier board.
- (and then only if PSC6_3 is read as "1" when booting).
- Patch by Martin Krause, 21 Jun 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Move "ar" flags to config.mk to allow for silent "make -s"
- Based on patch by Mike Frysinger, 20 Jun 2006
+commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 5 10:40:36 2007 +0100
-* Coding style cleanup
+ [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
-* Add support for EP82xxM boards
- Patch by Aaron Sells, 20 Jun 2006
+ This fix will make the MAL burst disabling patch for the Linux
+ EMAC driver obsolete.
-* Fix comments in include/ppc440.h
- Patch by Martin Hicks, 16 Jun 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Update for CAM5200 board:
- - Map in a additional chip selects CS4 and CS5.
- - Modify the port configration, configure six UARTs and no PCI,
- ATA and USB.
- - Add custom flash driver to handle specific byte swapping
+commit 023889838282b6237b401664f22dd22dfba2c066
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 5 10:38:05 2007 +0100
-* Fix TLB setup for Ocotea board
- Patch by Stefan Roese, 30 Sep 2006
+ [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
-* Fix reset problem in sequoia sdram init code
- Patch by Stefan Roese, 23 Sep 2006
+ This code will optimize the DDR2 controller setup on a board specific
+ basis.
-* Disable autoboot abort for FO300 when silent mode is enabled
- (according to S1 switch setting).
+ Note: This code doesn't work right now on the NAND booting image for the
+ Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
-* Cleanup examples binaries
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add support for AMCC Rainier PPX440GRx eval board
- Patch by Stefan Roese, 13 Sep 2006
+commit cce4acbb68398634b8d011ed7bb0d12269c84230
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Dec 28 19:08:21 2006 +0100
-* Add NAND environment support for PPC440EPx Sequoia NAND boot config
- Patch by Stefan Roese, 12 Sep 2006
+ Few V38B changes:
+ - fix a typo in V38B config file
+ - move watchdog initialisation earlier in the boot process
+ - add "wdt=off" to default kernel command line (disables kernel watchdog)
-* Update NAND boot documentation
- Patch by Stefan Roese, 12 Sep 2006
+commit 92eb729bad876725aeea908d2addba0800620840
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Dec 27 01:26:13 2006 +0100
-* Fix alignment problem in "mtdparts" command
+ Fix bug in adaption of Stefano Babic's CFI driver patch.
-* Add documentation on the latest build environment extensions to
- the README file.
+commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Dec 24 01:42:57 2006 +0100
-* Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory.
+ Minor code cleanup.
-* Fix LOG_DIR directory creation error.
- Add support for automatic creation of BUILD_DIR directory.
+commit d784fdb05900ada3686d5778783e1fb328e9fb66
+Author: Stefano Babic <sbabic@denx.de>
+Date: Tue Dec 12 00:22:42 2006 +0100
-* Fix build problem cpu/ppc4xx/ndfc.c
- Patch by Stefan Roese, 07 Sep 2006
+ Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
-* Fix build problem with CPCI440
- Patch by Stefan Roese, 07 Sep 2006
+commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 22 14:29:40 2006 +0100
-* Change Yellowstone to use CFI write buffer
- Patch by Stefan Roese, 07 Sep 2006
+ [PATCH] Fix sequoia flash autodetection (finally correct)
-* Add support for AMCC Sequoia PPC440EPx eval board
- - Add support for PPC440EPx & PPC440GRx
- - Add support for PPC440EP(x)/GR(x) NAND controller
- in cpu/ppc4xx directory
- - Add NAND boot functionality for Sequoia board,
- please see doc/README.nand-boot-ppc440 for details
- - This Sequoia NAND image doesn't support environment
- in NAND for now. This will be added in a short while.
- Patch by Stefan Roese, 07 Sep 2006
+ Now 32MByte and 64MByte FLASH is know to work and other
+ configurations should work too.
-* Fix mkimage -l bug with multifile images on 64bit platforms
- Patch by David Updegraff, 06 Sep 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fix build problems on sorcery board.
+commit 82e5236a8b719543643fd26d5827938ab2b94818
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Fri Dec 22 10:30:26 2006 +0100
-* Fix coldfire build problems.
- Patch by Marian Balakowicz, 01 Sep 2006
+ Minor code cleanup; update CHANGELOG.
-* Add support for a saving build objects in a separate directory.
- Modifications are based on the Linux kernel approach and support
- two use cases:
- 1) Add O= to the make command line 'make O=/tmp/build all'
- 2) Set environement variable BUILD_DIR to point to the desired location
- 'export BUILD_DIR=/tmp/build'
- 'make'
- The second approach can also be used with a MAKEALL script
- 'export BUILD_DIR=/tmp/build'
- './MAKEALL'
- Command line 'O=' setting overrides the BUILD_DIR environent variable.
- When none of the above methods is used the local build is performed
- and the object files are placed in the source directory.
+commit fa23044564091f05d9695beb7b5b9a931e7f41a4
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Thu Dec 21 17:17:02 2006 +0100
-* Remove the board/netstar/crcit binary from git repository.
+ Added support for the TQM8272 board from TQ
-* Fix tools/updater build error.
+ Signed-off-by: Heiko Schocher <hs@denx.de>
-* Fix tools/easylogo build error.
+commit c84bad0ef60e7055ab0bd49b93069509cecc382a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Dec 20 00:29:43 2006 +0100
-* Fixed problems on PRS200 board caused by adding splash screen on MCC200
+ Fix to make the baudrate changes immediate for the MCF52x2 family.
-* Extended README entry on coding style
+commit daa6e418bcc0c717752e8de939c213c790286096
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Dec 20 00:27:32 2006 +0100
-* Added another example showing simple interrupt interception.
+ Preliminary support for the iDMR board (ColdFire).
-* Added simple_strtoul(), getenv() and setenv() to the exported functions.
- Also bumped up ABI version to reflect this change.
+commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
+Author: Andrei Safronov <safronov@pollux.denx.de>
+Date: Fri Dec 8 16:23:08 2006 +0100
-* Added interrupt handling capabilities for mpc5xxx processors.
- Also added Linux like BUG() macros.
+ automatic update mechanism
-* Coding Style cleanup.
- Patch by Stefano Babic, 31 Aug 2006
+commit dd520bf314c7add4183c5191692180f576f96b60
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Nov 30 18:02:20 2006 +0100
-* Add splashscreen support for MCC200 board.
+ Code cleanup.
-* Make the serial driver framework work with CONFIG_SERIAL_MULTI
- enabled
+commit 8d9a8610b8256331132227e9e6585c6bd5742787
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Nov 30 01:54:07 2006 +0100
-* PCIe endpoint support for AMCC Yucca 440SPe board
- Patch by Tirumala R Marri, 26 Aug 2006
+ Code cleanup. Update CHANGELOG.
-* Improve DIMM detection for AMCC Yucca 440SPe board
- Improved the memory DIMM detection for the Yucca 440SPe board for
- the case where a memory DIMM is falsely detected as present.
- This issue is seen on some AMCC Yucca 440SPe validation boards if
- only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is
- populated and DIMM slot 1 is empty. In this case, U-Boot does
- not correctly detect that there is only one DIMM memory module
- installed and will falsely detect two DIMM memory modules are
- present and therefore U-Boot will not calculate the correct amount
- of total memory and u-boot will not booting up.
- Patch by Adam Graham, 24 Aug 2006
+commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Wed Nov 29 16:23:42 2006 +0100
-* Fix typo.
+ [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
-* Code cleanup
+ The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
+ not the XLB frequency.
-* Update for MCC200 / PRS200 boards:
- - auto-adjust console device for Linux.
- - fix typos.
+ This patch depends on the previous patches for MPC52xx device tree support
-* Add a fix for a buggy USB device on the FO300 board.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
-* Updates for MCC200 / PRS200 boards:
- - support for configurations with SDRAM or DDR memory,
- - support for highboot and lowboot
- - adjusting environment definitions
+commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 29 15:42:37 2006 +0100
-* Add support for WTK FO300 board (TQM5200 based).
+ [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
-* Fix TQM834x hang.
+ This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
+ and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
+ quite similar and share the same board directory "prodrive/p3mx"
+ and the same config file "p3mx.h".
-* Update for SC520 board.
- Patch by David Updegraff, 02 Dec 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fixed common.h spelling error.
- Patch by Cory Tusar, 30 Nov 2005
+commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 29 12:53:15 2006 +0100
-* Fix typo.
- Patch by Andreas Engel, 28 Nov 2005
+ [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
-* Fix fatload command on FAT32 formatted partitions.
- Patch by Joachim Jaeger, 18 Nov 2005
+ In the bootvx command the load address was only read from the env
+ variable "loadaddr" and not optionally passed as paramter as described
+ in the help. This is fixed with this patch. The behaviour is now the
+ same as in the bootelf command.
-* Fix drivers/dm9000.c when configured in 32 bit mode.
- Patch by Eric Benard, 17 Nov 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Cleanup debug code for yucca board.
+commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 29 12:03:57 2006 +0100
-* MCC200: restrict addressable flash space to 32 MB
+ [PATCH] include/ppc440.h minor error affecting interrupts
-* Add debug console on COM12 for MCC200 board
+ Fixed include/ppc440.c for UIC address Bug
-* Fix control-c handing in CONFIG_CMDLINE_EDITING
- Properly pass break code back from readline.
- Patch by Roger Blofeld, 31 Jul 2006
+ Corrects bug affecting the addresses for the universal interrupt
+ controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
-* Add commandline history support to all AMCC eval boards
- Patch by Stefan Roese, 07 Aug 2006
+ Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add Macronix MXLV320T flash support for AMCC Bamboo
- Patch by Stefan Roese, 07 Aug 2006
+commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Tue Nov 28 16:17:27 2006 -0600
-* Change "mii info" to not print an error upon missing PHY at address
- Patch by Stefan Roese, 07 Aug 2006
+ Make fsl-i2c not conflict with SOFT I2C
-* Fix PCI-Express on PPC440SPe rev. A.
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Fix preboot message on TQM85xx after switching to hush parser.
+commit 14198bf768fdc958e3c1afd2404e5262208e98d7
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Tue Nov 28 16:17:18 2006 -0600
-* Adapt TQM85xx ramdisk address to Linux kernel memory map
+ Fix I2C master address initialization.
-* Add initial support for PCI-Express on PPC440SPe (Yucca board).
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Fix compiler warning for TRAB board.
- Patch by Martin Krause, 07 Aug 2006
+commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Nov 28 23:31:19 2006 -0600
-* Prevent USB commands from working when USB is stopped.
+ Assign maintainers for mpc8349emds and mpc8360emds
-* Add rudimentary handling of alternate settings of USB interfaces.
- This is in order to fix issues with some USB sticks timing out
- during initialization. Some code readability improvements.
+ Dave for mpc8360emds, and me for mpc8349emds.
-* PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performance
- AMCC suggested to set the PMU bit to 0 for best performace on
- the PPC440 DDR controller.
- Please see doc/README.440-DDR-performance for details.
- Patch by Stefan Roese, 28 Jul 2006
+commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Nov 28 23:28:33 2006 -0600
-* AMCC bamboo (440EP) U-Boot image reduced to 384kbyte
- Please see doc/README.bamboo for details.
- Patch by Stefan Roese, 27 Jul 2006
+ Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
-* Fix CONFIG_CMDLINE_EDITING implementation
- Patch by Stefan Roese, 27 Jul 2006
+ give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
+ since they are passed by reference to ucc_get_cmxucr_reg and assigned.
-* Fix preboot message on TQM5200 after switching to hush parser.
+commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Nov 28 12:09:35 2006 -0600
-* MCC200: set default configuration to low_boot DDR,
- and support for configurable options high_boot and/or SDRAM.
+ mpc83xx: Miscellaneous code style fixes
-* Add support for 256 MB SDRAM on CPU87
- Patch by Josef Wagner, 25 Nov 2005
+ Implement various code style fixes and similar changes.
-* Add configuration for cam5200 board (based on TQM5200S).
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* More code cleanup
+commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 28 17:55:49 2006 +0100
-* Disabled kvme080 board in MAKEALL because of build problems.
+ [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
-* Code cleanup
+ This patch adds the code and configuration necessary to boot with an
+ arch/powerpc Linux kernel.
-* Update NetStar board
- Patch by Ladislav Michl, 03 Nov 2005
+ Signed-off-by: Grant Likely <grant.likely@gmail.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
-* Make code better readable.
- Patch by Ladislav Michl, 14 Sep 2005
+commit e732faec95a83cb468b4850ae807c8301dde8f6a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 28 16:09:24 2006 +0100
-* Enable initrd ATAG for xm250 board.
- Patch by Josef Wagner, 05 Sep 2005
+ [PATCH] PPC4xx: 440SP Rev. C detection added
-* Add readline cmdline-editing extension
- Patch by JinHua Luo, 01 Sep 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add support for friendly-arm SBC-2410X board
- Patch by JinHua Luo, 01 Sep 2005
+commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 28 11:04:45 2006 +0100
-* Fix multi-part image support on i386 platform.
- Patch by David Updegraff, 19 Aug 2005
+ [PATCH] nand: Fix patch merge problem
-* Add support for KVME080 board
- Patch by Sangmoon Kim, 18 Aug 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fix MIPS LE build problem
- Patch by Matej Kupljen, 10 Aug 2005
+commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 27 22:53:53 2006 +0100
-* Check argument count in "mii" command.
- Problem pointed out by Andrew Dyer, 13 Jun 2005
+ Update CHANGELOG
-* Cleanup TQM5200 board configurations:
- - make highboot configurations use environment at high end, too,
- to avoid flash fragmentation
- - always use redundand environment
- - don't enable video code for modules without graphics controller
- - provide useful (though different) mtdparts settings
- - get rid of CONFIG_CS_AUTOCONF which was always set anyway
+commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:43:25 2006 +0100
-* Extend mkconfig tool to print more useful target name
+ [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
-* Add support for high-boot on TQM5200 and TQM5200S boards.
- Hint: the CPLD on the TQM5200 must be programmed with a software
- version supporting the high boot option! The new TQM5200S is
- already supporting this option. On the TQM5200 this option will be
- supported in configurations with MPC5200 rev B processors.
- To actually "high boot", set jumper X30 on the STK52xx.
- Patch by Martin Krause, 12 Jul 2006
+ Patch below corrects the setting of the zmiifer register, it was
+ overwritting the register rather than ORing the settings.
-* Add support for new TQM5200 revisions
- - Support for TQM5200S (short version without graphic controller)
- - Support for modules with 'N' type S29GL128N Spansion flashes
- (requires changes to flash layout)
- - Support for MPC5200B cpu (mostly support for second SDRAM bank)
- Patch by Martin Krause, 07 Jul 2006
+ Signed-off-by: Neil Wilson <NWilson@airspan.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fix support for PS/2 keyboard on TQM85xx boards
- The PS/2 keyobard driver for the TQM85xx modules only supports the
- internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't
- include a DUART, the TQM8560 modules can't be used with the PS/2
- keyboard controller on the STK85xx board.
- The PS/2 keyboard driver should work with the modules TQM8540,
- TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet.
- Make sure the PS/2 controller on the STK85xx is programmed. Jumper
- settings: X66 1-2, 9-10; X61 2-3
- Patch by Martin Krause, 21 Jun 2006
+commit d1a72545296800b7e219f93104ad5836f0003d66
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:34:10 2006 +0100
-* Adjust RTC century handling on STK52xx board to match Linux driver.
- Patch by Martin Krause, 12 Jun 2006
+ [PATCH] Select NAND embedded environment from board configuration
-* Adjust filenames for USB update images on TRAB board.
- During an automatic update via USB stick, U-Boot searches for
- images with the name "firmware.img" and "kernel.img". This names
- are now changed to "firmw_01.img" and "kernl_01.img". This is done,
- to prevent updates of new boards (with the new macronics "c" step
- flashes) with old, incompatible firmware or kernel versions.
- Patch by Martin Krause, 21 Jun 2006
+ The current NAND Bootloader setup forces the environment
+ variables to be in line with the bootloader. This change
+ enables the configuration to be made in the board include
+ file instead so that it can be individually enabled.
-* Bugfix in VFD routine on TRAB board.
- Make sure upper lext pixel can be set to blue, too
- (so far only red was possible).
- Patch by Martin Krause, 15 Feb 2006
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Enable buffered flash writes for TB5200 board.
+commit 15784862857c3c2214498defcfed84ff137fb81e
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:22:19 2006 +0100
-* Fix some bugs in TRAB board flash driver.
- - increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds
- - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT
- - remove "Unlock Bypass" mode, because macronix flashes do not support
- this mode officially
- - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified
- for Intel compatible flashes, not for AMD compatible.
- Patch by Martin Krause, 15 Feb 2006
+ [PATCH] nand_wait() timeout fixes
-* Add additional error messages to flash driver on TRAB board
- (for erase errors and timeout errors)
- Patch by Martin Krause, 14 Feb 2006
+ Two fixes for the nand_wait() function in
+ drivers/nand/nand_base.c:
-* Add support for TB5200 board
- The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
- integrated in a little aluminium case.
- Patch by Martin Krause, 8 Jun 2006
+ 1. Use correct timeouts. The original timeouts in Linux
+ source are 400ms and 20ms not 40s and 20s
-* Enable buffered flash writes for TQM5200 board.
+ 2. Return correct error value in case of timeout. 0 is
+ interpreted as OK.
-* Fix problems with SanDisk Corporation Cruzer Micro USB memory stick.
+ Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add support for TQM885D board.
- Patch by Martin Krause, 20 Mar 2006
+commit da5553b095bf04f4f109ad7e565dae3aba47b230
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:04:06 2006 +0100
-* Fix FEC initialisation: All MII configuration is done via FEC1
- registers, but MII_SPEED was configured according to FEC used. So
- if only FEC2 was used, this caused the real MII_SPEED register in
- FEC1 to stay uninitalised, leqading to "mii_send STUCK!" messages.
- Fix: always configure MII_SPEED on FEC1 only.
- Patch by Markus Klotzbuecher, 12 Jul 2006
-
-* Add support for SPC1920 board.
- Patch by Markus Klotzbuecher, 12 Jul 2006
-
-* MCC200 board: support console on any one of the Quad UART ports.
-
-* Fix error in flash protection calculation on MCC200 board.
-
-* Major PCMCIA Cleanup to make code better readable and maintainable.
- Notes:
- - Board-dependend code for RPXLITE and RPXCLASSIC-based boards
- placed to the drivers/rpx_pmcia.c file to avoid duplication.
- Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c).
- - drivers/i82365.c has been split into two parts located at
- board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are
- the only boards using CONFIG_82365).
- - Changes were tested for clean build and *very* *few* boards.
-
-* Fix timer problems on AMCC yucca board.
- Set Timer Clock Select to use CPU clock as a timer input source.
-
-* Bring yucca config more in line with other AMCC boards.
+ [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
-* Add AMCC bamboo board to MAKEALL build script.
+ This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
+ arguments to bootm. It removes the getenv("disable_of") test that used
+ to be used for this purpose.
-* Fix AMCC bamboo eval board compilation errors.
-
-* Add system memory to the PCI region list for AMCC PPC44x CPUs.
- Enabled it for Yucca board.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
-* Cleanup config file and bootup output for Yucca board.
+commit a9398e018593782c5fa7d0741955fc1256b34c1e
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 27 15:32:42 2006 +0100
-* Fix CONFIG_440_GX define usage.
+ Minor code cleanup. Update CHANGELOG.
-* Remove autogenerated bmp_logo.h file.
+commit 1729b92cde575476684bffe819d0b7791b57bff2
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:52:04 2006 +0100
-* Add support for AMCC 440SPe CPU based eval board (Yucca).
+ [PATCH] 4xx: Fix problem with board specific reset code (now for real)
-* Call serial_initialize() before first debug() is used.
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Cleanup trab board for GCC-4.x
+commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:49:51 2006 +0100
-* VoiceBlue update: use new MTD flash partitioning methods, use more
- reasonable TEXT_BASE, update default environment and enable keyed
- autoboot.
- Patch by Ladislav Michl, 16. Aug 2005
+ [PATCH] alpr: remove unused board specific flash driver
-* Add forgotten changes for the PLEB 2 Board.
- Patch by David Snowdon, 13. Aug 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add support for wrPPMC7xx/74xx boards
- Patch by Richard Danter, 12 Aug 2005
+commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:48:41 2006 +0100
-* Add support for gth2 board
- Patch by Thomas Lange, Aug 11 2005
+ [PATCH] 4xx: Fix problem with board specific reset code
-* Add support for CONFIG_SERIAL_MULTI on MPC5xxx
- Patch by Martin Krause, 8 Jun 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
- This patch supports two serial consoles on boards with
- a MPC5xxx CPU. The console can be switched at runtime
- by setting stdin, stdout and stderr to the desired serial
- interface (serial0 or serial1). The PSCs to be used as
- console port are definded by CONFIG_PSC_CONSOLE
- and CONFIG_PSC_CONSOLE2.
- See README.serial_multi for details.
+commit ec0c2ec725aec9524a177a77ce75559e644a931a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:46:06 2006 +0100
-* Bugfix in I2C initialisation on S3C2400.
- If the bus is blocked because of a previously interrupted
- transfer, up to eleven clocks are generated on the I2CSCL
- line to complete the transfer and to free the bus.
- With this fix pin I2CSCL (PG6) is really configured as GPIO
- so the clock pulses are really generated.
- Patch by Martin Krause, 04 Apr 2006
+ [PATCH] Remove testing 4xx enet PHY setup
-* Fix DDR6 errata on TQM834x boards
- Patch by Thomas Waehner, 07 Mar 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Remove obsolete flash driver board/tqm5200/flash.c
- Patch by Martin Krause, 11 Jan 2006
+commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:12:17 2006 +0100
-* Update configuration for CMC-PU2 board
- Patch by Martin Krause, 17 Nov 2005
+ [PATCH] Update Prodrive ALPR board support (440GX)
-* Add support for PS/2 keyboard on TQM85xx board
- Patch by Martin Krause, 07 Nov 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Tested on a STK85XX baseboard. Make sure the PS/2 controller
- has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
+commit 78d620ebb5871d252270dedfad60c6568993b780
+Author: Wolfgang Denk <wd@atlas.denx.de>
+Date: Thu Nov 23 22:58:58 2006 +0100
-* Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
- In tsc2000_read_channel() the delay after setting the multiplexer
- to a temperature channel is increased from 1,5 ms to 10 ms. This
- is to allow the multiplexer inputs to stabilize after huge steps
- of the input signal level.
- Patch by Martin Krause, 08 Nov 2005
+ Updates for TQM5200 modules:
+ - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
+ - simplify "udate" definitions
-* Adjust TQM5200 make targets
- Make the automatic CS configuration the default.
- The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
- and CONFIG_TQM5200_AC are removed.
- "TQM5200_config" is now the default for STK52XX.200 base boards.
- On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
- Patch by Martin Krause, 07 Nov 2005
+commit 2053283304eeddf250d109e6791eb6fa4cad14f7
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 22 13:20:50 2006 +0100
-* Fix setting of environment variable "ver" on trab board
- The environment variable "ver" is now set before
- do_auto_update() is called, so that "ver" can be used
- in USB update scripts.
- Patch by Martin Krause, 27 Oct 2005
+ [PATCH] PPC4xx start.S: Fix for processor errata
-* Fix wrong usage of udelay() in led_blink() on trab board
- Patch by Martin Krause, 27 Oct 2005
+ Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
+ errata 1.12: 440_33 by moving patch up in code.
-* Fix udelay bug in vfd.c for trab board
- Patch by Martin Krause, 27 Oct 2005
+ Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Disable JFFS2 support for trab board
- Patch by Martin Krause, 27 Oct 2005
+commit 4ef6251403f637841000e0fef9e832aa01339822
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 20 20:39:52 2006 +0100
-* Change mtdparts definition on trab board to match current flash map
- Patch by Martin Krause, 27 Oct 2005
+ [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
-* Fix memory init problems on MCC200 board
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fix IxEthDB.h to compile again
- Patch by Stefan Roese, 14 Jun 2006
+commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 20 10:28:30 2006 +0100
-* Minor cleanup for PCS440EP board
- Patch by Stefan Roese, 13 Jun 2006
+ Update CHANGELOG
-* Add MCF5282 support (without preloader)
- relocate ichache_State to ram
- u-boot can run from internal flash
- Add EB+MCF-EV123 board support.
- Add m68k Boards to MAKEALL
- Patch from Jens Scharsig, 08 Aug 2005
+commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 13 13:55:24 2006 +0100
-* Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
- Patch by Scott McNutt, 08 Jun 2006
+ [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
-* Nios II - Add EPCS Controller bootrom work-around
- -When booting from an epcs controller, the epcs bootrom may leave the
- slave select in an asserted state causing soft reset hang. This
- patch ensures slave select is negated at reset.
- Patch by Scott McNutt, 08 Jun 2006
+ * Adds support for AMD command set Top Boot flash geometry reversal
+ * Adds support for reading JEDEC Manufacturer ID and Device ID
+ * Adds support for displaying command set, manufacturer id and
+ device ids (flinfo)
+ * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
+ * Removes outdated change history (refer to git log instead)
-* Update PK1C20 board
- -Update base addresses for standard configuration
- -Eliminate use of CACHE_BYPASS in board code
- Patch by Scott McNutt, 08 Jun 2006
+ Signed-off-by: Tolunay Orkun <listmember@orkun.us>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Nios II - Fix I/O Macros and mini-app stubs
- -Fix asm/io.h macros
- -Eliminate use of CACHE_BYPASS in cpu code
- -Eliminate assembler warnings
- -Fix mini-app stubs and force no small data
- Patch by Scott McNutt, 08 Jun 2006
+commit b21b511d4c50408f4853f46f06b601272196223f
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Nov 12 21:13:23 2006 +0100
-* Fix U-Boot environment sector protection on MCC200 board
+ Update CHANGELOG
-* Minor cleanup for PCS440EP board
+commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sat Nov 11 22:48:22 2006 +0100
-* Update PCS440EP port to fit into one flash device (incl. environment)
- Patch by Stefan Roese, 06 Jun 2006
+ Disable the watchdog in the default config for the V38B board.
-* Add support for PCS440EP board
- Patch by Stefan Roese, 02 Jun 2006
+commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sat Nov 11 22:43:00 2006 +0100
-* Fix examples/Makefile; some build targets were lost
+ Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
+ group is enabled for USB earlier (in cpu_init_f() instead of
+ usb_lowlevel_init()).
-* Fix watchdog handling in CFI flash driver
- Just use udelay() when waiting for status changes which will
- implicitely trigger the watchdog.
+commit 91650b3e4de688038d4f71279c44858e3e2c6870
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 6 17:06:36 2006 +0100
-* Fix PCI to memory window size problems on PM82x boards
- We use the "automatic" mode that was used for the MPC8266ADS and
- MPC8272 boards. Eventually this should be used on all boards?]
- Patch by Wolfgang Grandegger, 17 Jan 2006
+ Sequential accesses to non-existent memory must be synchronized,
+ at least on G2 cores.
-* Correct GPIO setup (UART1/IRQ's) on yosemite & yellowstone
- Patch by Stefan Roese, 29 May 2006
+ This fixes get_ram_size() problems on MPC5200 Rev. B boards.
-* Update Intel IXP4xx support
- - Add IXP4xx NPE ethernet MAC support
- - Add support for Intel IXDPG425 board
- - Add support for Prodrive PDNB3 board
- - Add IRQ support
- Patch by Stefan Roese, 23 May 2006
+commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Nov 3 19:15:00 2006 -0600
-* Fix problem in PVR detection for 440GR
- Patch by Stefan Roese, 18 May 2006
+ mpc83xx: Update 83xx to use fsl_i2c.c
-* Fix gcc 3.4.x AFLAGS setting for m68k platform.
+ Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
+ cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
+ Added multiple I2C bus support to fsl_i2c.c.
-* Enable autoboot for M5271EVB board.
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Changed default ramdisk addr in yosemite/yellowstone ports
- Patch by Stefan Roese, 15 May 2006
+commit d239d74b1c937984bc519083a8e7de373a390f06
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Nov 3 12:00:28 2006 -0600
-* Fix PCMCIA support on virtlab2
+ mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
-* Add support for VirtLab2 board
- (needed because of differences in the PCMCIA hardware).
+ Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
+ tree matches the other 8xxx trees.
-* Minor cleanup.
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Update yosemite configuration to enable flash write buffer support
- Patch by Stefan Roese, 10 May 2006
+commit f7fb2e703ec9688541416962724adff70a7322cb
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Nov 2 19:47:11 2006 -0600
-* Fix compile warnings in common/xyzModem.c
- Patch by Stefan Roese, 10 May 2006
+ mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
-* Add support for AMCC 440EP Rev C and 440GR Rev B
- Patch by John Otken, 08 May 2006
+commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
+Author: Dave Liu <daveliu@freescale.com>
+Date: Thu Nov 2 18:05:50 2006 -0600
-* OMAP 5912/OSK: update EMIFS CS1 timings:
- Problems have been seen in the linux kernel's smc91x network driver
- due to improper bus timings. The latest 2.6 OMAP kernels currently
- have a workaround, but this fix belongs in u-boot.
- Patch by Kevin Hilman, 13 Oct 2005
+ mpc83xx: Fix the incorrect dcbz operation
-* Fix REG_MPU_LOAD_TIMER definition in multiple OMAP ports
- Patch by Hiroki Kaminaga, 11 Mar 2006
+ The 834x rev1.x silicon has one CPU5 errata.
-* Update omap5912osk board support
- - Fix OMAP support that omap5912osk compiles in current source tree
- - Update with code from "http://omap.spectrumdigital.com/osk5912"
- to fix problems with DDR initialization
- - Fix timer setup
- - Use CFI flash driver and support complete 32MB of onboard flash
- - Add "print_cpuinfo()" and "checkboard()" functions to display
- CPU (with frequency) and Board infos
- Patch by Stefan Roese, 10 May 2006
+ The issue is when the data cache locked with
+ HID0[DLOCK], the dcbz instruction looks like no-op inst.
-* Fix watchdog issues for ColdFire boards.
+ The right behavior of the data cache is when the data cache
+ Locked with HID0[DLOCK], the dcbz instruction allocates
+ new tags in cache.
-* Add M5271EVB board support.
+ The 834x rev3.0 and later and 8360 have not this bug inside.
-* Make R5200 specific low level initialization board conditional.
+ So, when 834x rev3.0/8360 are working with ECC, the dcbz
+ instruction will corrupt the stack in cache, the processor will
+ checkstop reset.
-* Update CPU target identification strings for ColdFire family.
+ However, the 834x rev1.x can work with ECC with these code,
+ because the sillicon has this cache bug. The dcbz will not
+ corrupt the stack in cache.
+ Really, it is the fault code running on fault sillicon.
-* Update register definitions for MCF5271.
+ This patch fix the incorrect dcbz operation. Instead of
+ CPU FP writing to initialise the ECC.
-* Fix serial console support for MCF5271.
+ CHANGELOG:
+ * Fix the incorrect dcbz operation instead of CPU FP
+ writing to initialise the ECC memory. Otherwise, it
+ will corrupt the stack in cache, The processor will checkstop
+ reset.
-* Fixes for gcc 3.4 based m68k toolchain,
- based on patch by Jate Sujjavanich.
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
-* Fix lowboot support on MCC200 board
+commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Nov 1 00:10:40 2006 -0600
-* Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port:
- - Removed MPC8349ADS port
- - Added PCI support to MPC8349ADS
- - reworked memory map to allow mapping of all regions with BATs
- Patch by Kumar Gala, 20 Apr 2006
+ mpc83xx: add OF_FLAT_TREE bits to 83xx boards
-* Coding Style cleanup
+ add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
+ STDOUT_PATH configuration bits to mpc8349emds,
+ mpc8349itx, and mpc8360emds board code.
-* Write RTC seconds first to maintain settings integrity per
- Maxim/Dallas DS1306 data sheet.
- Patch by Alan J. Luse, 02 May 2006
+ redo environment to use bootm with the fdtaddr
+ for booting ARCH=powerpc kernels by default,
+ and provide default fdtaddr values.
-* Scheduled for removal: strnicmp() which is unused
+commit 48041365b3420589ad464ebc7752e0053538b729
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Nov 1 00:07:25 2006 -0600
-* Update for Intel Monahans boards:
- - support for magic key detection and handling on delta board
- - NAND support for zylonite board + some minor cleanup
+ mpc83xx: change ft code to modify local-mac-address property
-* Declare load_serial_ymodem() when using CFG_CMD_LOADB.
- Patch by Jon Loeliger, 01 May 2006
+ Update 83xx OF code to update local-mac-address properties
+ for ethernet instead of the obsolete 'address' property.
-* Fixed handling of bad checksums with "mkimage -l"
+commit 9ca880a250870a7d55754291b5591d2b5fe89b54
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 21:23:16 2006 -0600
-* Added support for BC3450 board
- Patch by Stefan Strobl, 21 Oct 2005
+ mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
-* Update for NC650 board:
- - Support rev1 and rev2 hardware
- - adapt to new NAND layer
- - add CP850 configuration based on NC650
+ This patch also adds an improved I2C set_speed(), which handles all clock
+ frequencies.
-* MPC5200: enable snooping of DMA transactions on XLB even if no PCI
- is configured; othrwise DMA accesses aren't cache coherent which
- causes for example USB to fail.
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Some code cleanup
+commit ac4b5622ce050b5ee1e154b98df630d778661632
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 31 19:54:59 2006 -0600
-* Fix dbau1x00 boards broken by dbau1550 patch
- PLL:s were not set for boards other than 1550.
- Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
- Default boot is now bootp for cards other than 1550.
- Patch by Thomas Lange, 10 Aug 2005
+ mpc83xx: add the README.mpc8360emds
-* Fixes common/cmd_flash.c:
- - fix some compiler/parser error, if using m68k tool chain
- - optical fix for protect on/off all messages, if using more
- then one bank
- Patch by Jens Scharsig, 28 Jul 2005
+ add doc/README.mpc8360emds to accompany the new board support
-* Fix Quad UART mapping on MCC200 board due to new HW revision
+commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 3 12:11:15 2006 -0600
-* Fix JFFS2 support for legacy NAND driver.
+ mpc83xx: add QE ethernet support
-* Remove dependencies between DoC code and old legacy NAND driver.
+ this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
-* Fix PM828_PCI target, for which PCI was *not* configured in.
+commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 3 19:33:44 2006 -0600
-* Fix Lite5200B support: initialize SDelay register
- See Freescale's AN3221 "MPC5200B SDRAM Initialization and
- Configuration", 3.3.1 SDelay--MBAR + 0x0190
+ mpc83xx: Add MPC8360EMDS basic board support
-* Changes/fixes for drivers/cfi_flash.c:
+ Add support for the Freescale MPC8360EMDS board.
+ Includes DDR, DUART, Local Bus, PCI.
- - Add Intel legacy lock/unlock support to common CFI driver
+commit 23892e49352de74f7fac36ff90bb1be143d195e3
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 31 19:30:40 2006 -0600
- On some Intel flash's (e.g. Intel J3) legacy unlocking is
- supported, meaning that unlocking of one sector will unlock
- all sectors of this bank. Using this feature, unlocking
- of all sectors upon startup (via env var "unlock=yes") will
- get much faster.
+ mpc83xx: add the QUICC Engine (QE) immap file
- - Fixed problem with multiple reads of envronment variable
- "unlock" as pointed out by Reinhard Arlt & Anders Larsen.
+ common QE immap file. Also required for 8360.
- - Removed unwanted linefeeds from "protect" command when
- CFG_FLASH_PROTECTION is enabled.
+commit b701652a4992bdcc62fb1a6038a85beef9e55da4
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 31 19:25:38 2006 -0600
- - Changed p3p400 board to use CFG_FLASH_PROTECTION
+ mpc83xx: Add 8360 specifics to 83xx immap
- Patch by Stefan Roese, 01 Apr 2006
+ Mainly add QE device dependencies, with appropriate 8360 protection.
+ Lindent also run.
-* Changes/fixes for drivers/cfi_flash.c:
- - Correctly handle the cases where CFG_HZ != 1000 (several
- XScale-based boards)
- - Fix the timeout calculation of buffered writes (off by a
- factor of 1000)
- Patch by Anders Larsen, 31 Mar 2006
+commit 988833324a7fda482c8ac3ca23eb539f8232e404
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 19:14:41 2006 -0600
-* Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
+ mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
- 405 SDRAM: - The SDRAM parameters can now be defined in the board
- config file and the 405 SDRAM controller values will
- be calculated upon bootup (see PPChameleonEVB).
- When those settings are not defined in the board
- config file, the register setup will be as it is now,
- so this implementation should not break any current
- design using this code.
+ PREREQUISITE PATCHES:
- Thanks to Andrea Marson from DAVE for this patch.
+ * This patch can only be applied after the following patches have been applied:
- 440 DDR: - Added function sdram_tr1_set to auto calculate the
- TR1 value for the DDR.
- - Added ECC support (see p3p440).
+ 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
+ 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
- Patch by Stefan Roese, 17 Mar 2006
+ CHANGELOG:
-* Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S
- Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
+ * For the 8349E-mITX, fix some size values in pci_init_board(), enable
+ the clock for the 2nd USB board (Linux kernel will hang otherwise),
+ and fix the CONFIG_BOOTARGS macro.
-* Add support for ymodem protocol download
- Patch by Stefano Babic, 29 Mar 2006
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000
- Merge from Markus Klotzbücher's repo, 01 Apr 2006
+commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 18:44:42 2006 -0600
-* GCC-4.x fixes: clean up global data pointer initialization for all
- boards
+ mpc83xx: Add support for the MPC8349E-mITX
-* Update for Delta board:
- - redundant NAND environment
- - misc Monahans cleanups (remove dead code etc.)
- - DA9030 Initialization; some minimal changes to PXA I2C driver to
- make it work with the Monahans.
- - Make Monahans clock frequency configurable using
- CFG_MONAHANS_RUN_MODE_OSC_RATIO and
- CFG_MONAHANS_TURBO_RUN_MODE_RATIO.
- Merge from Markus Klotzbücher's repo, 25 Mar 2006
+ PREREQUISITE PATCHES:
-* Enable Quad UART om MCC200 board.
+ * This patch can only be applied after the following patches have been applied:
-* Cleanup MCC200 board configuration; omit non-existent stuff.
+ 1) DNX#2006090742000024 "Add support for multiple I2C buses"
+ 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
+ 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
+ 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
+ 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
-* Add support for MPC859/866 Rev. A.0
+ CHANGELOG:
-* Add command for handling DDR ECC registers on MPC8349EE MDS board.
+ * Add support for the Freescale MPC8349E-mITX reference design platform.
+ The second TSEC (Vitesse 7385 switch) is not supported at this time.
-* Fix DDR ECC bit definitions for MPC83xx.
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Add initial support for MPC8349E MDS board.
+commit 183da6d9b446cc12123455844ad1187e2375626f
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Tue Sep 12 10:15:53 2006 -0400
-* Add support for ECC DDR initialization on MPC83xx.
+ Additional MPC8349 support for multibus i2c
-* Add DMA support for MPC83xx.
+ Hello,
-* Add sync in do_reset() routine for MPC83xx after RPR register
- was written to. It is need on some targets when BAT translation
- is enabled.
+ Here is a patch for a file that was accidentally left out of a previous
+ attempt.
-* Add bit definitions for MPC83xx DDR controller registers.
+ It accompanies the patch with ticket DNX#2006090742000024
-* Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.
+ CHANGELOG:
+ Change PCI initialization to use new multi-bus I2C API.
-* Correct shift offsets in icache_status and dcache_status for MPC83xx.
+ regards,
+ Ben
-* Add support for DS1374 RTC chip.
+commit b24f119d672b709d153ff2ac091d4aa63ec6877d
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Thu Sep 7 16:51:04 2006 -0400
-* Add support for Lite5200B board.
- Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
+ Multi-bus I2C implementation of MPC834x
-* Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific
- timer and cpu_reset code from cpu/$(CPU) into the new
- cpu/$(CPU)/$(SOC) directories
- Patch by Andreas Engel, 13 Mar 2006
+ Hello,
-* Change max size of uncompressed uImage's to 8MByte and add
- CFG_BOOTM_LEN to adjust this setting.
+ Attached is a patch implementing multiple I2C buses on the MPC834x CPU
+ family and the MPC8349EMDS board in particular.
+ This patch requires Patch 1 (Add support for multiple I2C buses).
+ Testing was performed on a 533MHz board.
- As mentioned by Robin Getz on 2005-05-24 the size of uncompressed
- uImages was restricted to 4MBytes. This default size is now
- increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN
- in the board config file.
+ /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
- Patch by Stefan Roese, 13 Mar 2006
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
-* Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c
- Patch by Stefan Roese, 13 Mar 2006
+ CHANGELOG:
+ Implemented driver-level code to support two I2C buses on the
+ MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
+ are 50kHz, 100kHz and 400kHz on each bus.
-* cpu/ppc4xx/start.S : exceptions are enabled after relocation
- Patch by Cedric Vincent, 06 Jul 2005
+ regards,
+ Ben
-* au1x00_eth.c: check malloc return value and abort if it failed
- Patch by Andrew Dyer, 26 Jul 2005
+commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Thu Sep 7 16:50:54 2006 -0400
-* Change the sequence of events in soft_i2c.c:send_ack() to keep from
- incorrectly generating start/stop conditions on the bus.
- Patch by Andrew Dyer, 26 Jul 2005
+ Add support for multiple I2C buses
-* Fix bug in [id]cache_status commands for MPC85xx processors;
- should look at LSB of L1CSRn registers to determine if L1 cache is
- enabled, not the MSB.
- Patch by Murray Jensen, 19 Jul 2005
+ Hello,
-* Fix array overflow with fw_setenv on uninitialised environment
- Patch by Murray Jensen, 15 Jul 2005
+ Attached is a patch providing support for multiple I2C buses at the
+ command level. The second part of the patch includes an implementation
+ for the MPC834x CPU and MPC8349EMDS board.
-* Add support for EmbeddedPlanet EP88x boards
- Patch by Yuli Barcohen, 13 Jul 2005
+ /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
-* Remove board specific configuration includes from the common xilinx
- ethernet and iic adapter code.
- Patch by Michael Libeskind, 12 Jul 2005
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
-* Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver
- Patch by Murray Jensen, 08 Jul 2005
+ Overview:
-* Add (some) definitions for the MPC85xx local bus controller
- Patch by Murray Jensen, 08 Jul 2005
+ 1. Include new 'i2c' command (based on USB implementation) using
+ CONFIG_I2C_CMD_TREE.
-* Add CPM2 I/O pin functions for MPC85xx processors
- Patch by Murray Jensen, 08 Jul 2005
+ 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
+ the commands to change bus number and speed are only available under the
+ new 'i2c' command mentioned in the first bullet.
-* Fix compile problem
+ 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
+ systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
+ of an array of bus-device pairs. Otherwise, it is an array of uchar.
-* Added PCI support for MPC8349ADS board
- Patch by Kumar Gala 11 Jan 2006
+ CHANGELOG:
+ Added new 'i2c' master command for all I2C interaction. This is
+ conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
+ setting I2C bus speed as well as changing the active bus if the board
+ has more than one (conditionally compiled with
+ CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
+ Updated README.
-* Enable address translation on MPC83xx
- Patch by Kumar Gala, 10 Feb 2006
+ regards,
+ Ben
-* Decopuled setting of OR/BR and LBLAWBAR/LBLAWAR on MPC83xx
- Patch by Kumar Gala, 25 Jan 2006
+commit bed85caf872714ebf53013967a695c9d63acfc68
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 18:13:36 2006 -0600
-* Fixed defines for MPC83xx SICRL register to match current specs
- Patch by Kumar Gala, 23 Jan 2006
+ mpc83xx: Add support for Errata DDR6 on MPC 834x systems
-* Only disable the MPC83xx watchdog if its enabled out of reset.
- If its disabled out of reset SW can later enable it if so desired
- Patch by Kumar Gala, 11 Jan 2006
+ CHANGELOG:
-* Allow config of GPIO direction & data registers at boot on 83xx
- Patch by Kumar Gala, 11 Jan 2006
+ * Errata DDR6, which affects all current MPC 834x processors, lists changes
+ required to maintain compatibility with various types of DDR memory. This
+ patch implements those changes.
-* Enable time handling on 83xx
- Patch by Kumar Gala, 11 Jan 2006
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Make System IO Config Registers board configurable on MPC83xx
- Patch by Kumar Gala, 11 Jan 2006
+commit afd6e470f639883002c7c59d562690a5cb0f4865
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Oct 25 18:45:23 2006 -0500
-* Fixed PCI indirect config ops to handle multiple PCI controllers
- We need to adjust the bus number we are trying to access based
- on which PCI controller its on
- Patch by Kumar Gala, 12 Jan 2006
+ mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
-* Report back PCI bus when doing table based device config
- Patch by Kumar Gala, 11 Jan 2006
+commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Aug 22 17:07:00 2006 -0500
-* Added support for PCI prefetchable region and BARs
- If a host controller sets up a region as prefetchable and
- a device's BAR denotes it as prefetchable, allocate the
- BAR into the prefetch region.
+ mpc83xx: Add support for variable flash memory sizes on 83xx systems
- If a BAR is prefetchable and no prefetchable region has
- been setup by the controller we fall back to allocating
- the BAR into the normally memory region.
- Patch by Kumar Gala, 11 Jan 2006
+ CHANGELOG:
-* Add helper function for generic flat device tree fixups for mpc83xx
- Patch by Kumar Gala, 11 Jan 2006
+ * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
+ window registers, instead of using a hard-coded value of 8MB.
-* Add support for passing initrd information via flat device tree
- Patch by Kumar Gala, 11 Jan 2006
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Added OF_STDOUT_PATH and OF_SOC
+commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
+Author: Tanya Jiang <tanya.jiang@freescale.com>
+Date: Thu Aug 3 18:38:13 2006 +0800
- OF_STDOUT_PATH specifies the path to the device the kernel can use
- for console output
+ mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
- OF_SOC specifies the proper name of the SOC node if one exists.
- Patch by Kumar Gala, 11 Jan 2006
+ Unified TQM834x variable names with 83xx and consolidated macro
+ in preparation for the 8360 and other upcoming 83xx devices.
-* Allow board code to fixup the flat device tree before booting a kernel
- Patch by Kumar Gala, 11 Jan 2006
+ Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
-* Added CONFIG_ options for bd_t and env in flat dev tree
+commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
+Author: Dave Liu <daveliu@freescale.com>
+Date: Wed Oct 25 14:41:21 2006 -0500
- CONFIG_OF_HAS_BD_T will put a copy of the bd_t
- into the resulting flat device tree.
+ mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
- CONFIG_OF_HAS_UBOOT_ENV will copy the environment
- variables from u-boot into the flat device tree
+ Incorporated the common unified variable names and the changes in preparation
+ for releasing mpc8360 patches.
- Patch by Kumar Gala, 11 Jan 2006
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
-* Add support for the DHCP vendor optional bootfile (#67).
- Ignores the vendor TFTP server name option (#66).
- Patch by Murray Jensen, 30 Jun 2005
+commit 3894c46c27c64891f93ac04edde86a9fa9758d92
+Author: Tanya Jiang <tanya.jiang@freescale.com>
+Date: Thu Aug 3 18:36:02 2006 +0800
-* Fix a HW timing issue on 8548 CDS for eTSEC 3 in RGMII mode
- Patch by Andy Fleming, 14 Jun 2005
+ mpc83xx: Fix missing build for mpc8349emds pci.c
-* Fix bad register definitions for LTX971 PHY on MPC85xx boards.
- Patch by Gerhard Jaeger, 21 Jun 2005
+ Make pci build for mpc8349emds
-* Add netconsole and some more commands to RPXlite_DW board
- Patch by Sam Song, 19 Jun 2005
+ Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
-* Fix bad declaration on pci_cfgfunc_nothing
- Patch by Sam Song, 19 Jun 2005
+commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
+Author: Tanya Jiang <tanya.jiang@freescale.com>
+Date: Thu Aug 3 18:39:49 2006 +0800
-* Adjust "echo" as a default command
- Patch by Sam Song, 19 Jun 2005
+ mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
-* Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC
- Patch by KokHow Teh, 16 Jun 2005
+ Removed unused file resetvec.S for mpc83xx cpu
-* Add crc of data to jffs2 (in jffs2_1pass_build_lists()).
- Patch by Rick Bronson, 15 Jun 2005
+ Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
-* Coding Style cleanup
+commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
+Author: Nick Spence <Nick.Spence@freescale.com>
+Date: Sat Sep 30 00:32:59 2006 -0700
-* Avoid dereferencing NULL in find_cmd() if no valid commands were found
- Patch by Andrew Dyer, 13 Jun 2005
+ NAND Flash verify across block boundaries
-* Add ADI Blackfin support
- - add support for Analog Devices Blackfin BF533 CPU
- - add support for the ADI BF533 Stamp uClinux board
- - add support for the ADI BF533 EZKit board
- Patches by Richard Klingler, 11 Jun 2005
+ This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
+ defined
+ and the write crosses a block boundary. The pointer to the verification
+ buffer (bufstart) is not being updated to reflect the starting of the
+ new
+ block so the verification of the second block fails.
-* Add loads of ntohl() in image header handling
- Patch by Steven Scholz, 10 Jun 2005
+ CHANGELOG:
-* Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
- variable to set clock
- Patch by Yuli Barcohen, 05 Jun 2005
+ * Fix NAND FLASH page verification across block boundaries
-* RPXlite configuration fixes
- - Use correct flash sector size
- - Use correct memory test end address
- - Add support for bzip2 compression
- - Various small fixes
- Patch by Yuli Barcohen, 05 Jun 2005
+commit f484dc791a3932537213c43c654cc1295c64b84c
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Sep 7 07:39:46 2006 -0700
-* Memory configuration changes for ZPC.1900 board
- - Fix SDRAM timing on both local bus and 60x bus
- - Add support for second flash bank (SIMM)
- - Change boot flash base
- Patch by Yuli Barcohen, 05 Jun 2005
+ Added RGMII support to the TSECs and Marvell 881111 Phy
-* Add support for Adder boards with 16MB SDRAM;
- add support for second FEC on Adder87x board.
- Patch by Yuli Barcohen, 05 Jun 2005
+ Added a phy initialization to adjust the RGMII RX and TX timing
+ Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
-* Fix conditional for including ks8695eth driver
- Patch by Greg Ungerer, 04 Jun 2005
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
-* Fix Makefile: include config.mk only after CROSS_COMPILE is defined
- Patch by Friedrich Lobenstock, 02 Jun 2005
+commit c59200443072353044aa4bf737a5a60f9a9af231
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Nov 2 15:15:01 2006 +0100
-* Fix comment in common/soft_i2c.c
- Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
+ Release U-Boot 1.1.6
-* Cleanup compiler warnings.
- Patch by Greg Ungerer, 21 May 2005
+commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 02:04:38 2006 +0100
-* Word alignment fixes for word aligned NS16550 UART
- Patch by Jean-Paul Saman, 01 Mar 2005
+ Finish up support for MarelV38B board
+ - add watchdog support
+ - enable GPIO_WKUP_7 pin for input
+ - code cleanup
- Fixes bug with UART that only supports word aligned access: removed
- "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some
- (broken!) versions of GCC generate byte accesses when encountering
- the packed attribute regardless if the struct is already correctly
- aligned for a platform. Peripherals that can only handle word
- aligned access won't work properly when accessed with byte access.
- The struct NS16550 is already word aligned for REG_SIZE = 4, so
- there is no need to packed the struct in that case.
+commit ffa150bc90c943ca265170bd1be3f293674dd5c7
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 01:45:46 2006 +0100
-* Fix behaviour if gatewayip is not set
- Patch by Robin Gilks, 23 Dec 2004
+ - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
+ * remove warnings when compiling ethaddr.c
+ * adjust linker script (fixes a crash resulting from incorrect
+ definition of __u_boot_cmd_start)
+ - Some MarelV38B code cleanup.
-* Fix cleanup for netstart board.
- Remove build results from repository
+commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 01:38:16 2006 +0100
-* Some code cleanup for GCC 4.x
+ - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
+ MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
+ Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
+ MPC5XXX_WU_GPIO_DATA_O for affected boards.
-* Fixes to support environment in NAND flash;
- enable NAND flash based environment for delta board.
+ - Add defintions for some MPC5XXX GPIO pins.
-* Add support for Intel Monahans CPU on Zylonite and Delta boards
- (This is Work in Progress!)
+commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 01:34:29 2006 +0100
-* Add support for TQM8260-AI boards.
+ Changed MarelV38B board make target to lowercase. Config file cleanup.
-* Minor code cleanup
+commit 1954be6e9c9421b45d0a9d05b10356acc7563150
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Oct 29 01:03:51 2006 +0200
-* Merge the new NAND code (testing-NAND brach); see doc/README.nand
- Rewrite of NAND code based on what is in 2.6.12 Linux kernel
- Patch by Ladislav Michl, 29 Jun 2005
+ Automatically adjust ARFLAGS so "make -s" is really silent.
-* Add lowboot target to mcc200 board
- Patch by Stefan Roese, 4 Mar 2006
+commit fae684e89844856383bdf101440889557df3e6b1
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 28 16:45:00 2006 +0200
-* Fix problem with flash_get_size() from CFI driver update
- Patch by Stefan Roese, 1 Mar 2006
+ [PATCH] omap925.c: Remove unused functions
-* Make CFG_NO_FLASH work on ARM systems
- Patch by Markus Klotzbuecher, 27 Feb 2006
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
- use hush shell.
+commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 28 17:12:58 2006 +0200
-* Convert mcc200 to use common CFI flash driver
- Patch by Stefan Roese, 28 Feb 2006
+ [PATCH] Add some missing machtypes for netstar & voiceblue boards
-* Add env-variable "unlock" to handle initial state of sectors
- (locked/unlocked).
+ Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
+ numbers in code.
- Only the U-Boot image and it's environment is protected,
- all other sectors are unprotected (unlocked) if flash
- hardware protection is used (CFG_FLASH_PROTECTION) and
- the environment variable "unlock" is set to "yes".
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Patch by Stefan Roese, 28 Feb 2006
+commit 856f054410cef52d868feb330168b2a4c4091328
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 28 15:55:52 2006 +0200
-* Update drivers/cfi_flash.c:
- - find_sector() called in both versions of flash_write_cfiword()
- Patch by Peter Pearse, 27th Feb 2006
+ [PATCH] NAND: Partition name support added to NAND subsystem
-* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
- Patch by Jose Maria Lopez, 16 Jan 2006
+ chpart, nboot and NAND subsystem related commands now accept also partition
+ name to specify offset.
-* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
- Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Changes/fixes for drivers/cfi_flash.c:
- We *should* check if there are any error bits if the previous call
- returned ERR_OK (Otherwise we will have output an error message in
- flash_status_check() already.) The original code would only check for
- error bits if flash_status_check() returns ERR_TIMEOUT.
- Patch by Marcus Hall, 23 Aug 2005
+commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Oct 28 02:29:44 2006 +0200
-* Changes/fixes for drivers/cfi_flash.c:
- - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
- - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
- Patch by Sangmoon Kim, 19 Aug 2005
+ Update CHANGELOG.
-* Fixes for drivers/cfi_flash.c:
- - Fix wrong timeout value usage in flash_status_check()
- - Round write_tout up when converting to msec in flash_get_size()
- - Remove clearing flash status at the end of flash_write_cfibuffer()
- which sets Intel 28F640J3 flash back to command mode on CSB472
- Patch by Tolunay Orkun, 02 July 2005
+commit 2751a95abd1b96911081c357e96a12fa97b40dee
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Oct 28 02:29:14 2006 +0200
-* Add basic support for the SMMACO4 Board from PanDaCom.
- Patch by Heiko Schocher, 20 Feb 2006
+ Enable commandline editing and hush shell on all TQM boards.
-* Add GIT version information (commid ID) to untagged U-Boot versions
+commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Oct 28 02:28:02 2006 +0200
- As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
- of all unreleased (untagged) U-Boot images will be automatically
- extended upon compiletime with a part of the GIT commit ID and
- possibly with "dirty" if uncommited changes are detected.
+ README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
- Here an example for the resulting version:
- "U-Boot 1.1.4-g3457ac18-dirty"
+commit 471a7be7a042e95e440f5de969c9765214ae8d6e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Oct 28 01:14:32 2006 +0200
- The version is now maintained in the toplevel Makefile and the
- version headers are autogenerated.
+ Check for illegal character '=' in environment variable names.
- Patch by Stefan Roese, 9 Feb 2006
+ Make sure the string passed as variable name does not contain a '='
+ character. This not only prevents the common error or typing
+ "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
+ also closes a backdoor which allowed to delete write-protected
+ environment variables, for example by using "setenv ethaddr=".
-* Update default environment for INKA4x00 board.
+commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Oct 28 00:38:39 2006 +0200
-* Convert CPCI750 to use common CFI flash driver
- Patch by Reinhard Arlt, 8 Feb 2006
+ Minor code cleanup.
-* Various changes to esd HH405 board specific files
- Patch by Matthias Fuchs, 07 Feb 2006
+commit e11887a77d81077416a2d1c5e0354916fee8c034
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Oct 26 17:55:31 2006 +0200
-* Cleanup U-Boot boot messages on ARM.
+ Don't pass any debug options directly to the assembler
- To match the U-Boot user interface on ARM platforms to the U-Boot
- standard (as on PPC platforms), some messages with debug character
- are removed from the default U-Boot build.
- Enable DEBUG for lib_arm/board.c to enable debug messages.
- New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.
- Patch by Stefan Roese, 24 Jan 2006
+ When passing the -g option to gcc, gcc automatically selects a
+ suitable --g<format> option to pass on to the assembler.
+ Thus, there's no point in forcing a specific debug option on the
+ assembler using the -Wa mechanism.
-* Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
- Patch by Stefan Roese, 18 Jan 2006
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-* Add VGA support (CT69000) to CPCI750 board.
- Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
- Patch by Reinhard Arlt, 30 Dec 2005
+commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Oct 27 07:47:22 2006 -0500
-* PMC405 and CPCI405: Moved configuration of pci resources
- into config file.
- PMC405 and CPCI2DP: Added firmware download and booting via pci.
- Patch by Matthias Fuchs, 20 Dec 2005
+ MPC86xx: Cleaned up unused and conditionally used local variables.
-* Add ColdFire targets to MAKEALL script
- Patch by Zachary Landau, 26 Jan 2006
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Add support for r5200 board
- Patch by Zachary Landau, 26 Jan 2006
+commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Fri Oct 27 11:55:21 2006 +0200
-* Add support for Freescale M5271 processor
- Patch by Zachary Landau, 26 Jan 2006
+ Fix "ar" flags in some Makefiles to allow for silent "make -s"
-* Fix 28F256J3A support on PM520 board
- (without bank-switching only 32 MB can be accessed)
+commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Thu Oct 26 14:38:25 2006 -0400
-* Fix mkimage bug with multifile images created on 64 bit systems.
+ Fix TSEC driver (now for real): avoid crashes if PHY is not attached
+ to a TSEC (e.g. a switch is connected via RMII) or
+ if the PHY is defective/incorrectly configured.
-* Add support for 28F256J3A flash (=> 64 MB) on PM520 board
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
-* Fix compiler problem with at91rm9200dk board.
- Patch by Eugen Bigz, 19 Dec 2005
+commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Thu Oct 26 14:38:25 2006 -0400
-======================================================================
-Changes for U-Boot 1.1.4:
-======================================================================
+ Fix TSEC driver: avoid crashes if PHY is not attached
+ to a TSEC (e.g. a switch is connected via RMII) or
+ if the PHY is defective/incorrectly configured.
-* Changes to Yellowstone & Yosemite 440EP/GR eval boards:
- - Changed GPIO setup to enable another address line in order to
- address 64M of FLASH.
- - Added function sdram_tr1_set to auto calculate the tr1 value for
- the DDR.
- Patch by Steven Blakeslee, 12 Dec 2005
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
-* MPC5200: Set PCI retry counter to 0 = infinite retry;
- The default of 255 is too short for slow devices.
- Patch by Martin Nykodym, 12 Dec 2005
+commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Oct 26 16:24:31 2006 +0200
-* Change port configuration for O2DNT (CODEC1 on PSC1).
+ Code cleanup.
-* Fix register for PCI async mode on PPC440EP
- Patch by Youngchul Bang, 08 Dec 2005
+commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Oct 25 15:48:59 2006 +0200
-* Fix U-Boot linking problems (add .eh_frame segment to linker script)
- This segment may be required by some libgcc.a functions
- (like _udivdi3).
+ Finish up support for the ATSTK1000/ATSTK1002 boards
-* Fix DPRAM offset/size for MPC8541/8555.
- Simplify TQM85xx Makefile handling.
+ Add atstk1002_config target to Makefile and move the AVR32 section
+ down below Blackfin so that it doesn't end up in the middle of
+ MIPS.
-* Fix data overflow (typo?) in rtc/ds1302.c
+ Drop the autogenerated linker script thing for now. Will have to
+ revisit how to handle chips with different flash and RAM layout
+ later.
-* Fix U-Boot compilation for MIPS boards using ELDK 4.0
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-* Add support for TQM8541/8555 boards, TQM85xx support reworked:
- - Support for TQM8541/8555 boards added.
- - Complete rework of TQM8540/8560 support.
- - Common TQM85xx code now supports all current TQM85xx platforms
- (TQM8540/8541/8555/8560).
- - DDR SDRAM size detection added.
- - CAS latency default values can be overwritten by setting "serial#"
- to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
- If problems are detected with this non default CAS latency,
- the default values will be used instead.
- - Flash size detection added.
- - Moved FCC ethernet driver initialization behind TSEC driver init
- -> TSEC is first device.
- Patch by Stefan Roese, 30 Nov 2005
+commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 24 23:47:37 2006 -0500
-* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
- Patch by John Otken, 23 Nov 2005
+ Added support for Multi-Image files that contain a device tree
-* Changed PPC44x startup message (cpu info, speed...) to common style:
- On PPC44x platforms, the startup message generated in "cpu.c" only
- comprised the ppc type and revision but not additional information
- like speed etc. Those speed infos where printed in the board specific
- code. This new implementation now prints all CPU infos in the common
- cpu specific code. No board specific code is needed anymore and
- therefore removed from all current 44x implementations.
- Patch by Stefan Roese, 27 Nov 2005
+ If a Multi-Image file contains a third image we try to use it as a
+ device tree. The device tree image is assumed to be uncompressed in the
+ image file. We automatically allocate space for the device tree in memory
+ and provide an 8k pad to allow more than a reasonable amount of growth.
-* Adjust TQM834x PHY addresses for latest hardware revision.
+ Additionally, a device tree that was contained in flash will now automatically
+ get copied to system memory as part of boot. Previously an error was
+ reported if one tried to boot a device tree that was in flash.
-* Increase malloc arena on TQM5200 board to 256 kB.
- With 64 kb uniform flash sector size the old value of 128 kB was
- too small.
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-* Fix miiphy global data initialization (problem on 4xx boards when
- no ethaddr is assigned). Initialization moved from
- miiphy_register() to eth_initialize().
+commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Oct 24 21:35:55 2006 +0200
- Based on initial patch for 4xx platform by Matthias Fuchs.
+ Switch to automatically generated CHANGELOG file.
+ (use "make CHANGELOG" to update it from time to time)
-* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
+commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 24 18:06:48 2006 +0200
-* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
- The COPYING file was extended to make clear that these files can be
- used in non-GPL code, too.
- Also, a corresponding note was placed in the headers of the affected files.
+ Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
+ Patch by Stefan Roese, 24 Oct 2006
-* Add support for Prodrive P3P440 board:
- - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- - CFG_FLASH_QUIET_TEST added to use the common CFI driver
- for bank autodetection
- Patch by Stefan Roese, 22 Nov 2005
+commit 8ae3b713b2286e0c3213b7802062e4c1599010de
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 17:24:55 2006 +0200
-* Change all '$(...)' variable references into '${...}'
- which makes the environment compatible with the hush shell.
- WARNING: Support for the old '$(...)' syntax will be
- discontinued in a later version.
+ Merge with /home/wd/git/u-boot/master
-* Minor changes to init flags in TQM834x PCI.
+commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 15:32:57 2006 +0200
-* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
- Patch by Stefan Roese, 15 Nov 2005
+ Code cleanup
-* New PPC 405EP board added: CMS700
- Added CONFIG_NET_MULTI for VOM405 board.
- Added reset_phy() for VOM405 board.
- Patch by Matthias Fuchs, 09 Nov 2005
+commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 14:51:36 2006 +0200
-* Updated PCI mapping for esd CPCI2DP board.
- Add support for error LED.
- Patch by Matthias Fuchs, 07 Nov 2005
+ Move atstk1000 files into vendor specific directory.
+ Patch by Haavard Skinnemoen, 12 Sep 2006
-* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
- Patch by Stefan Roese, 07 Nov 2005
+commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 14:42:37 2006 +0200
-* Correct PPC Timebase register definitions (SPRN_TBRL...)
- Patch by Stefan Roese, 07 Nov 2005
+ Add ATSTK1000 and ATSTK1002 board support
+ Patch by Haavard Skinnemoen, 06 Sep 2006
-* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
- Patch by Stefan Roese, 05 Nov 2005
+ This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
+ daughterboard.
-* Additional fix for external IRQ config on Yellowstone & Yosemite
- Patch by Stefan Roese, 03 Nov 2005
+ ATSTK1000 is a full-featured development board for AT32AP CPUs. It
+ has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
+ and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
+ CompactFlash cards. For more information, please see this page:
-* Add support for Ocotea pass 3 with 440GX Rev. F
- Patch by Stefan Roese, 01 Nov 2005
+ http://www.atmel.com/dyn/products/tools.asp?family_id=682
-* Fix external IRQ configuration on Yellowstone & Yosemite
- Patch by Stefan Roese, 28 Oct 2005
+ The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
+ AT32AP7000 chip.
-* Add support for multiple PHYs.
- Tested on the following boards:
- cmcpu2 (at91rm9200/ether.c)
- PPChameleon (ppc4xx/4xx_enet.c)
- yukon (mpc8220/fec.c)
- uc100 (mpc8xx/fec.c)
- tqm834x (mpc834x/tsec.c) with EEPRO100
- lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
- Main changes include:
- common/miiphyutil.c
- - miiphy_register routine was added to allow multiple PHYs to be registered
- - miiphy_read and miiphy_write are now defined in this file, and
- require additional argument (char *devname)
- - other miiphy_* routines also require additional device name argument
- ../lib_i386/board.c
- ../lib_ppc/board.c
- Calling reset_phy() was moved to be executed *after* eth_initialize().
- This is necessary as now some of the implementations of reset_phy()
- may need to use miiphy_reset() which is not allowed before eth_initialize()
- as eth_initialize registers all required miiphy_* routines.
- Tested on IP860 and PHY initializes properly after this change.
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-* Correct includes for flat tree builder.
+commit f93ae788c3640fcde5db383471d45548ff4060d0
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 14:31:24 2006 +0200
-* Fix conflicting types (flash_write()) in trab auto_update.c.
+ Add common serial driver for Atmel AT32 and AT91 chips
+ Patch by Haavard Skinnemoen, 06 Sep 2006
-* Add PCI support for the TQM834x board.
+ This is a first attempt at creating a common serial driver for Atmel
+ chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
+ be possible to support AT91RM9200 and other ARM-based chips with some
+ minor modifications.
-* Add missing 4xx board to MAKEALL
- Patch by Stefan Roese, 20 Oct 2005
+ There's nothing fundamentally AVR32-specific in this driver, but it
+ does use some features which are currently only defined for the
+ AT32AP CPU port:
+ * pm_get_clock_freq: Obtain the clock frequency of a given domain
+ * gd->console_uart: A "struct device" containing information about
+ register mappings, gpio resources and clocks associated with the
+ UART device.
-* Fix conflicting types (flash_write()) in esd auto_update.c
- Patch by Stefan Roese, 20 Oct 2005
+ For more information about these features, please see the "AT32AP
+ CPU" patch.
-* Fix problem with sleep in NetConsole (use get_timer())
- Patch by Stefan Roese, 20 Oct 2005
+commit 72a087e04705c26cad982879ebd06b5281bf825a
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 14:27:35 2006 +0200
-* Add NetConsole Support for AMCC eval boards
- Patch by Stefan Roese, 20 Oct 2005
+ Add AT32AP CPU and AT32AP7000 SoC support
+ Patch by Haavard Skinnemoen, 06 Sep 2006
-* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
- Patch by Stefan Roese, 18 Oct 2005
+ This patch adds support for the AT32AP CPU family and the AT32AP7000
+ chip, which is the first chip implementing the AVR32 architecture.
-* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
- Fix identation on ext2ls help entry.
- Patch by Stefan Roese, 14 Oct 2005
+ The AT32AP CPU core is a high-performance implementation featuring a
+ 7-stage pipeline, separate instruction- and data caches, and a MMU.
+ For more information, please see the "AVR32 AP Technical Reference":
-* Add support for TQM834x boards.
- Cleanup.
+ http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
-* Cleanup for GCC-4.x
+ In addition to this, the AT32AP7000 chip comes with a large set of
+ integrated peripherals, many of which are shared with the AT91 series
+ of ARM-based microcontrollers from Atmel. Full data sheet is
+ available here:
-* Add documentation for Open Firmware Flat Tree and usage.
- Patch by Pantelis Antoniou, 13 Oct 2005
+ http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
-* Add missing files for Pantelis Antoniou's patch
- Patch by Pantelis Antoniou, 04 Sep 2005
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-* Fix problem in ppc4xx eth-driver without ethaddr (only without
- CONFIG_NET_MULTI set)
- Patch by Stefan Roese, 10 Oct 2005
+commit 7b64fef33c66be648826c0ff9758298ef13d0604
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 14:21:16 2006 +0200
-* Fix gzip bmp support (test if malloc fails, warning when truncated).
- Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
- Patch by Stefan Roese, 07 Oct 2005
+ Add AVR32 architecture support
+ Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
-* Add support for OF flat tree for the STXtc board.
- Patch by Pantelis Antoniou, 04 Sep 2005
+ This patch adds common infrastructure code for the Atmel AVR32
+ architecture. See doc/README.AVR32 for details.
-* Support passing of OF flat trees to the kernel.
- Patch by Pantelis Antoniou, 04 Sep 2005
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-* Cleanup
+commit 2da2d9a4766063b9848f3a35ad6025499cf87265
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 13:57:33 2006 +0200
-* Add support for NetSilicon NS7520 processor.
- Patch by Art Shipkowski, 12 May 2005
+ Use -g instead of -gstabs in AFLAGS_DEBUG
+ Patch by Haavard Skinnemoen, 30 Aug 2006
-* Add support for AP1000 board.
- Patch by James MacAulay, 07 Oct 2005
+ In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
+ matter what the target's preferred debugging format is. This patch
+ simply replaces -gstabs with -g, so that the default debugging format
+ for the architecture is used.
-* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
- Patch by Anders Larsen, 07 Oct 2005
+commit 965829872169c2996023840d98e1d85ad148d629
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 13:55:18 2006 +0200
- The Atmel errata #11 states that the transfer buffer descriptor
- table must be aligned on a 16-word boundary. As it turned out, this
- is insufficient - it seems the table must be aligned on a boundary
- at least as large as the table itself (in Linux this is not an
- issue - the table is aligned on a PAGE_SIZE (4096) boundary).
+ Fix/workaround broken dependency handling with make 3.81
+ Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
-* Fixed compilation for ARM when using a (standard) hard-FP toolchain
- Patch by Anders Larsen, 07 Oct 2005
+commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Mon Oct 23 22:17:05 2006 +0200
-* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
- sed the linker scripts, rather than pre-process them.
- Patch by Peter Pearse, 07 Oct 2005
+ Fix sequoia separate object direcory building problems.
-* Update make target for ARM supported boards.
- Use lowlevel_init() instead of platformsetup() [rename].
- Patch by Peter Pearse, 06 Oct 2005
+commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Oct 20 17:16:35 2006 -0500
-* Fix booting from serial dataflash on AT91RM9200
- Patch by Peter Menzebach, 29 Aug 2005
+ Use generic I2C register block on 85xx and 86xx.
-* Add JFFS2 support for TRAB board
- Patch by Martin Krause, 25 Aug 2005
+ Replace private IMMAP I2C structures with generic reg block
+ and allow 86xx to have multiple I2C device busses.
-* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
- Patch by Marcus Hall, 24 Aug 2005
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Fix the machine-id of the Cogent csb637 board
- Patch by Anders Larsen, 05 Oct 2005
+commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Oct 20 15:54:34 2006 -0500
-* Complete support for the KwikByte KB920x boards
- Patch by Anders Larsen, 05 Oct 2005
+ Fix compilation warnings on a few 85xx boards.
-* Set the AT91RM9200 clock to asynchronous mode
- Patch by Anders Larsen, 03 May 2005
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Set the AT91RM9200 clock to synchronous mode
- Patch by Anders Larsen, 29 Apr 2005
+commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Oct 20 15:50:15 2006 -0500
-* Add support for Cogent csb637
- Patch by Anders Larsen, 29 Apr 2005
+ Converted all 85xx boards to use a common FSL I2C driver.
+ Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
+ And removed hard i2c path from a few u-boot.lds scipts too.
+ Minor whitespace cleanups along the way.
-* Fix dm9161.c initialization
- Patch by Anders Larsen, 29 Apr 2005
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
- (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
+commit 4d45f69e362b05892c9e92a7907e5820995612aa
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Oct 19 12:02:24 2006 -0500
-* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
- Patch by Anders Larsen, 29 Apr 2005
+ Rewrite a series of goto statements as a sequences of
+ conditional expressions instead.
-* Fix device partition intialization for SystemACE disks.
- Patch by Stephen Williams, 28 Apr 2005
+ Use consistent return code 0/-1 for good/bad indicators.
-* Added support for KwikByte KB920x boards (based on AT91RM9200)
- Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
+ Include one fewer file if the driver isn't used at all.
-* Add support for S29GL064M-R3 flash chip on xsengine board
- Patch by Kurt Stremerch, 18 Apr 2005
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* E500 update: repoint IVPR to RAM when code is relocated
- Patch by Kylo Ginsberg, 13 Apr 2005
+commit 7237c033b02fe295880435f1eb80819a0c987532
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Oct 19 11:02:16 2006 -0500
-* Fix loop end test in lib_generic/string.c:strswab()
- Patch by Andrew Dyer, October 10, 2005
- Signed-off-by: Andrew Dyer <amdyer@gmail.com>
+ Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
-* Cleanup
+ in an effort to begin to unify the umpteen FSL I2C drivers that
+ are all otherwise very similar.
-* Update ARM Integrator boards:
- Correct addessing errors in platform files.
- Split off common core module data from Integrator header files to
- include/armcoremodule.h.
- Patch by Peter Pearse, 04 Oct 2005
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Make sure only supported compiler options are used
- Import "cc-option" shell function from kernel and
- use it to get the correct ARM GCC options for individual CPUs
- Patch by Peter Pearse, 30 Jun 2005
+commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Oct 19 11:33:52 2006 -0500
-* Fix 440GR to print correct cpu revision
- Patch by Stefan Roese, 04 Oct 2005
+ * Fix a bunch of compiler warnings for gcc 4.0
-* Change board message on AMCC Yosemite & Yellowstone to common style
- Patch by Stefan Roese, 03 Oct 2005
+ Signed-off-by: Matthew McClintock <msm@freescale.com>
-* Fix compiler warning
+commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 17 06:14:31 2006 +0200
-* Fix FEC PHY addresses for TQM85xx boards
+ Add monitor functions for indirect access to PPC440 DCR's
+ Patch by Leonid Baryudin, 12 Oct 2006
-* Fix uninitialized variable problem in hush shell
- Patch by Lars Rostock, 26 Sep 2005
+commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Oct 13 16:47:53 2006 -0500
-* Undo change of f6e20fc6ca... to include/configs/trab.h
- (Must have been an accident?)
+ Fixed leading whitespace issues.
+ Removed spurious LAWAR thing.
-* Add support for AT91RM9200 OHCI Controller.
- Patch by Eric Benard, 07 Apr 2005
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Update ARM mach-types.h
- Patch by Eric Benard, 07 Apr 2005
+commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Oct 12 10:42:36 2006 -0500
-* Add support for MP2USB board.
- Patch by Eric Benard, 07 Apr 2005
+ Remove unneeded include files and local variable.
-* Add board support for armadillo HT1070
- Patch by Rowel Atienza, 06 Apr 2005
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
- Patch by Vitaly Bordug, 30 Mar 2005
+commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Oct 10 00:23:32 2006 -0600
-* Add iopset command on mpc8xx
- Patch by Daniel Eisenhut, 25 Mar 2005
+ Fix possible uninitialized variable compiler warning.
-* Add support for MII in eepro100 driver.
- Patch by Gleb Natapov, 21 Mar 2005
+ When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
+ do_bootm_linux() may be uninitialized. There is no possibility in the
+ current code that len will get used uninitialized, but this fix follows
+ the existing convention of setting both len and data to zero at the same
+ time.
-* Fixes to the Lubbock (PXA 25x) support:
- - Resolve the FIXME with respect to saving the u-boot environment.
- - Make the default load address land in real memory.
- - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
- Patch by David Brownell, 10 Mar 2005
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
- Patch by Marc Leeman, 04 Mar 2005
+commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Oct 11 15:13:01 2006 -0500
-* OMAP242x H4 board update
- - fix for ES2 differences.
- - switch to using the cfi_flash driver.
- - fix SRAM build address.
- - fix for GP device operation.
- - unlock SRAM for GP devices.
- - display more device information.
- - fix potential deadlock in omap24xx_i2c driver.
- - fix DLL load values to match dpllout*1 operation.
- - fix 2nd chip select init for combo DDR device.
- - add support for CFI Intel 28F256L18 on H4 board.
- Patch by Richard Woodruff, 03 Mar 2005
+ * Fix a bunch of compiler warnings for gcc 4.0
-* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
- Patch by Steven Scholz, 02 Mar 2005
+ Signed-off-by: Matthew McClintock <msm@freescale.com>
-* Fix typo in eth.c
- Patch by Ara Avanesyan, 24 Feb 2005
+commit bf651baa365e5447246aad6a633ccd667cf24a39
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Oct 11 10:10:43 2006 -0500
-* Remove unneeded #include <malloc.h>
- Patch by Ladislav Michl, 22 Feb 2005
+ Move "ar" flags to config.mk to allow for silent "make -s"
-* Add cramfs support for m68k
- Patch by Zachary Landau, 21 Feb 2005
+commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 10 17:19:03 2006 -0500
-* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
- Patch by Jeff Angielski, 21 Feb 2005
+ Coding style changes to remove local varible blocks
+ and reformat a bit nicer.
-* Fix au1x00_serial baud rate calculation:
- remove hardcoded cpu clock divisor and use register instead;
- round up instead of truncate
- Patch by Andrew Dyer, 15 Feb 2005
+commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 10 17:16:04 2006 -0500
-* Add Xilinx Spartan3 family FPGA support
- Patch by Kurt Stremerch, 14 Feb 2005
+ Fix whitespace issues.
-* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
- Patch by Zachary Landau, 11 Feb 2005
+commit 7b382b7125f2397cce63253df62f183e3dfa2770
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 10 17:14:45 2006 -0500
-* Fix VOH405 Support
- Patch by Matthias Fuchs, 25 Sep 2005
+ Fix whitespace issues.
-* Added support for PCI bridge on MPC8272ADS
- Patch by Vitaly Bordug, Feb 09 2005
+commit e10390ddd736b0dad1528eec4b0fe35c0827139a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 10 17:06:53 2006 -0500
-* Update multicore CM9XX support for Integrator AP to allow booting from flash
- Patch by Jean-Paul Saman, 8 Feb 2005
+ Fix whitespace issues.
-* Fix strswab() to reliably find end of string
- Patch by Andrew Dyer, 08 Feb 2005
+commit 89875e96ba3f023157bf50d5f8e33bf254964a76
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 10 17:03:43 2006 -0500
-* Fix typos in include/ppc440.h
- Patch by Andrew E Mileski, 04 Feb 2005
+ Ran lindent and cleaned up whitespace issues.
+ Format for 80-columns too.
-* Add Vibren (was Accelent) PXA255 IDP Support
- Patch by Cliff Brake, 04 Feb 2005
+commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 10 17:02:22 2006 -0500
-* Fix tools/bmp_logo.c using incorrect offset to pixel data
- Patch by Andrew Dyer, 31 Jan 2005
+ Fix whitespace and 80-col issues.
-* Add ARM946E cpu and core module targets; remap memory to 0x00000000
- Patch by Peter Pearse, 2 Feb 2005
+commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:36:51 2006 +0200
-* Fix error handling in tools/env/fw_env.c
- Patch by Ara Avanesyan, 01 Feb 2005
+ CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
+ Patch by Stefan Roese, 07 Oct 2006
-* Fix MGT5100 PSC baudrate calculation
- Patch by Sebastian Schau, 27 Jan 2005
+commit 5bc528fa4da751d472397b308137238a6465afd2
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:35:25 2006 +0200
-* OMAP242x fix for GP device booting
- - Add SRAM unlock for GP devices.
- - Change DDR DLL unlock value to allow DPLLout*1 operation.
- Patches by Richard Woodruff, 21 Jan 2005:
+ Update ALPR code (NAND support working now)
+ Patch by Stefan Roese, 07 Oct 2006
-* Add support for AMD's Pb1x00 eval board;
- add MII routines to the au1x00 ethernet driver;
- add USB ohci driver (work in progress)
- Patch by Thomas Sailer, 20 Jan 2005
+commit 77d5034847d328753b80c46b83f960a14a26f40e
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:33:03 2006 +0200
-* Update omap5912osk board
- Use drivers/cfi_flash.c instead of private flash driver;
- Remove hardcoded personalized settings from omap5912osk.h;
- Fix spacing with (RO) marks in 'flinfo' output.
- Patch by Michael Bendzick, 14 Jan 2005
+ Remove compile warnings in fpga code
+ Patch by Stefan Roese, 07 Oct 2006
-* Fix warnings for PCI code on ixp
- Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
+commit f3443867e90d2979a7dd1c65b0d537777e1f9850
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:30:52 2006 +0200
-* virtex2 fix for bogus download error messages
- The virtex2 FPGA download code watches for init going active during
- a download of config data as an error condition. init also goes
- active after a configuration is finished in concert with the done
- signal. So far, the code does not check for done active until all
- of the configuration data is sent. If configuration data has a few
- extra pad bytes at the end, this would cause an error message even
- though the download had suceeded.
- NOTE: virtex2 slave serial and spartan2 versions may still have the
- same problem.
- Patch by Andrew Dyer, 12 Jan 2005
+ Add CONFIG_BOARD_RESET to configure board specific reset function
+ Patch by Stefan Roese, 07 Oct 2006
-* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
- Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
- message when probing for nonexistent flash in little endian mode.
- As a side effect more efficient and smaller code is generated,
- which is always a Good Thing (TM).
- Patch by Ladislav Michl, 24 Sep 2005
+commit f55df18187e7a45cb73fec4370d12135e6691ae1
+Author: John Traill <john.traill@freescale.com>
+Date: Fri Sep 29 08:23:12 2006 +0100
-* Update for TFTP using a fixed UDP port
- Use the approved environment variable names. Added "tftpdstp" to
- allow ports other than 69 per Tolunay Orkun's recommendation.
- Patch by Jerry Van Baren, 12 Jan 2005
+ Fix missing tCycle/modfreq calculation.
-* Allow to force TFTP to use a fixed UDP port
- (Add a configuration option CONFIG_TFTP_PORT and optional env
- variable tftpport)
- Patch by Jerry Van Baren, 10 Jan 2005
+ Signed-off-by: John Traill <john.traill@freescale.com>
-* Fix ethernet timeouts on dbau1550 and other au1x00 systems
- Patch by Leif Lindholm, 29 Dec 2004
+commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Sep 13 10:33:35 2006 -0500
-* Cleanup: fix broken builds
+ Updated config headers to add default FDT-based booting
-* Fix PHY address argument passing with mii info command
- Patch by Andrew Dyer, 28 Dec 2004
+commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Sep 13 10:34:18 2006 -0500
-* Cleanup (PPC4xx is AMCC now)
+ Add support for eTSEC 3 & 4 on 8548 CDS
-* esd CPCI2DP board added
- Patch by Matthias Fuchs, 22 Sep 2005
+ * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
+ This will only work on rev 1.3 boards (but doesn't break older boards)
+ * Cleaned up some comments to reflect the expanded role of tsec
+ in other systems
-* esd PMC405 board updated
- Patch by Matthias Fuchs, 22 Sep 2005
+commit 084d648b109c8984f83674043c1a7fa3885ef801
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Sep 13 10:33:56 2006 -0500
-* Add SM501 support to HH405 board.
- Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
- Add support for eeprom write-enable (CFG_EEPROM_WREN).
- Patch by Stefan Roese, 22 Sep 2005
+ Added code to support 2.6.18 PCI changes in u-boot
-* Fix autonegotiation in tsec ethernet driver
- Patch by Stefan Roese, 21 Sep 2005
+ * Added code to swizzle the IRQ map for the PCI
-* Fix bug in auto_update (trab board)
- Patch by Martin Krause, 16 Sep 2005
+commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Sep 19 09:34:10 2006 -0500
-* Fix computation of framebuffer palette for 8bpp LCD bitmaps
- Patch by Francesco Mandracci, 16 Sep 2005
+ Modified makefile for new build mechanism.
-* Update configuration for INKA4x0 board
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Update configuration for PM854 board
- Based on patch by R. Loeffl, 20 Jul 2005
+commit d14ba6a798beb753e7a864500414fcc2d198b8bc
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Sep 14 08:40:36 2006 -0500
-* Add PCI support to TQM8540 and TQM8560 boards
- Patch by Stefan Roese, 15 Sep 2005
+ Handle 86xx SVR values according to the new Reference Manual.
+ Both 8641 and 8641D have SVR == 0x8090, and are distinguished
+ by the byte in bits 16-23 instead.
+ Thanks to Jason Jin for noticing.
-* Update AMCC Yosemite to get a consistent setup for all AMCC eval
- boards (baudrate, environment...). Flash driver fixed.
- Patch by Stefan Roese, 15 Sep 2005
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
- ethernet port on ebony.
- Patch by Stefan Roese, 7 Sep 2005
+commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Mon Aug 28 14:25:31 2006 +0800
-* Added support for mtddevnum and mtddevname variables (mtdparts command)
+ Fixed an OF-tree off-by-one bug when adding a new property name.
+ This bug will cause the kernel booting to pause a long time.
-* Change default console baud rate for stxxtc board
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+ (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
-* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
- Patch by Stefan Roese, 31 Aug 2005
+commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 29 11:05:09 2006 -0500
-* Fix default command set (don't include CFG_CMD_DISPLAY command)
- Patch by Pantelis Antoniou, 02 Sep 2005
+ Remove trailing empty lines.
-* Cleanup
+commit cd6d73d5b895a5935ac4fde0a356288142a584e0
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 29 09:48:49 2006 -0500
-* Enable SM712 driver support for HMI1001 board.
+ Remove bogus msync and use volatile asm.
-* Fix problems with ld version 2.16 (dot outside sections problem)
- Pointed out by Gerhard Jaeger, 31 Aug 2005;
- cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
+commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 29 08:17:14 2006 -0500
-* Prepare U-Boot for gcc-4.x: fix global data pointer initialization
+ Add myself as maintainer for MPC8641HPCN.
-* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
+commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Mon Aug 28 14:25:31 2006 +0800
-* Add keyboard and dot matrix display support for HMI1001 board.
+ Fixed an OF-tree off-by-one bug when adding a new property name.
+ This bug will cause the kernel booting to pause a long time.
-* Prepare U-Boot for gcc-4.x
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
-* Fixed Bamboo port to enable running without DDR-DIMM
- (Bamboo has also 64MB onboard DDR)
- Patch by Stefan Roese, 24 Aug 2005
+commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Fri Aug 25 14:38:34 2006 -0400
-* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
- now handling all 4xx cpu's
- Patch by Stefan Roese, 16 Aug 2005
+ Change ramdiskaddr and dtbaddr
+ Remove PEX fluff commands.
-* Fix make dependencies for at91rm9200 and ks8695 cpus
- Patch by Steven Scholz, 23 Aug 2005
+ Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Add JFFS2 support for TQM5200 board
+commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Aug 23 13:32:45 2006 -0500
-* Add esd cpci5200 and pf5200 boards
- Patch by Reinhard Arlt, 22 Aug 2005
+ * Another small fix for booting with disable_of
-* Fix sysclock for TQM8540 and TQM8560 boards
- Patch by Martin Krause, 25 Jul 2005
+ Signed-off-by: Matthew McClintock <msm@freescale.com>
-* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
- Patch by Martin Krause, 08 Jun 2005
+commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Aug 23 11:04:43 2006 -0500
-* Add new board specific commands for TQM5200/STK52XX
- - Sound commands (beep, wav, sound)
- - Test commands (led, can, backlight, rs232)
- Patch by Martin Krause, 02 May 2005
+ Cleanup and lindent new AHCI driver.
-* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
- because of a bug in the AT91RM9200 CPU PLL
- Patch by Martin Krause, 22 Apr 2005
+commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
+Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
+Date: Wed Aug 23 19:15:12 2006 +0800
-* Add automatic HW detection for another CMC_PU2 variant
- Patch by Martin Krause, 20 Apr 2005
+ Add AHCI define and sata support for MPC8641HPCN board.
-* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
- Patch by Martin Krause, 19 Apr 2005
+ Signed-off-by:Jason Jin<jason.jin@freescale.com>
-* Fix initialization problem on TQM5200 without SM501
- Patch by Martin Krause, 08 Apr 2005
+commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
+Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
+Date: Wed Aug 23 19:10:44 2006 +0800
-* Add RTC support for STK52XX.200
- Patch by Martin Krause, 07 Apr 2005
+ Add AHCI support to u-boot
-* Add support for IFM o2dnt board
+ Add AHCI support in u-boot, enable the sata disk controllers which
+ following the AHCI protocol.
-* Enable PCI on hmi1001 board
+ Signed-off-by:Jason Jin<jason.jin@freescale.com>
-* Fix return values of the jffs2 commands ls/fsload/fsinfo,
- so we can use them to, e.g., check the existence of a file with
- "if ls foo; then this; else that; fi" in the hush shell
- Patch by Andreas Engel, 16 August 2005
+commit d8ea2acf5f137cae99417df4f573d036ee384668
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Wed Aug 23 17:54:32 2006 +0800
-* Coding style cleanup
+ Add dtb boot-up parameter to default boot commands.
-* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
- Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
-* Check return value of malloc in 440gx_enet.c
- Patch by Travis B. Sawyer, 18 Jul 2005
+commit b93775c2036b99baa390ea425c4771895bbc63c4
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 22 18:26:08 2006 -0500
-* Add Sandburst Metrobox and Sandburst Karef board support packages.
- Second serial port on 440GX now defined as a system device.
- Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
- Patch by Travis B. Sawyer, 12 Jul 2005
+ Cleanup even more poorly introduced whitespace.
-======================================================================
-Changes for U-Boot 1.1.3:
-======================================================================
+commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 22 18:07:00 2006 -0500
-* Minor code cleanup
+ Cleanup more poorly introduced whitespace.
-* Add forgotten new fils from latest VoiceBlue update
+commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 22 17:54:05 2006 -0500
-* Make bootretry feature work with hush shell.
- Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
- Patch by Andreas Engel, 19 Jul 2005
+ Cleanup poorly introduced whitespace.
-* Update Hymod Board Database PHP code in "tools" directory
- Patch by Murray Jensen, 01 Jul 2005
+commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 22 12:25:27 2006 -0500
-* Make "tr" command use POSIX compliant; export HOSTOS make variable
- Patch by Murray Jensen, 30 Jun 2005
+ General indent and whitespace cleanups.
-* Fix Murray Jensen's mail address.
- Patch by Murray Jensen, 30 Jun 2005
+commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 22 12:06:18 2006 -0500
-* Preserve PHY_BMCR during a soft reset.
- Patch by Carl Riechers, 24 Jun 2005
+ General indent and whitespace cleanups.
-* VoiceBlue update: eeprom tool can also store firmware version now.
- eeprom.bin is runable by jumping at load address.
- Patch by Ladislav Michl, 23 May 2005
+commit 41a0e8b304d3ff55fe27a230507aac79684016ac
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 22 10:42:21 2006 -0500
-* Move the AT91RM9200DK to the ARM Systems list.
- Patch by Anders Larsen, 26 Apr 2005
+ Cleanup compiler warnings.
-* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
- Patch by Anders Larsen, 26 Apr 2005
+commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
+Author: Matthew McClintock <msm@freescale.com>
+Date: Tue Aug 22 09:31:59 2006 -0500
-* measure_gclk() is needed when DEBUG is enabled
- Patch by Bryan O'Donoghue, 25 Apr 2005
+ Fix disable_of booting
-* Add UPD-Checksum code, fix problem in net.c (return instead of break)
- Patch by Reinhard Arlt, 12 Aug 2005
+ Signed-off-by: Matthew McClintock <msm@freescale.com>
-* esd PCI405 board updated
- Patch by Matthias Fuchs, 28 Jul 2005
+commit 87a449c8ac396420cb24260f717ea9e6faa82047
+Author: Matthew McClintock <msm@freescale.com>
+Date: Tue Aug 22 09:23:55 2006 -0500
-* esd WUH405 and DU405 board updated
- Patch by Matthias Fuchs, 27 Jul 2005
+ Support for FDT in uImage format, error when using FDT from flash
-* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
- Patch by Matthias Fuchs, 4 May 2005
+ Signed-off-by: Matthew McClintock <msm@freescale.com>
-* Update AMCC Yosemite to get a consistent setup for all AMCC eval
- boards (baudrate, environment...). Flash driver fixed.
- Patch by Stefan Roese, 11 Aug 2005
+commit 75c299c38369d01addd5e054b8a16217b70f4a86
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Tue Aug 15 15:12:55 2006 -0400
-* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
- Patch by Stefan Roese, 11 Aug 2005
+ Unlock cache before kernel starts up for MPC86xx
-* Add NAND FLASH support for AMCC Bamboo 440EP eval board
- Patch by Stefan Roese, 11 Aug 2005
+commit 67256678f00c09b0a7f19e862e5c1847553d31bc
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Tue Aug 15 15:13:15 2006 -0400
-* Add configuration for IFM AEV FIFO board.
- Minor coding style cleanup.
+ Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
-* Add configuration for IFM SPI eval board
+commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Tue Aug 15 15:12:55 2006 -0400
-* Fix CompactFlash problem on HMI1001 board
+ Unlock cache before kernel starts up for MPC86xx
-* Make new "mtdparts" code build with older compilers
- Patch by Andrea Scian, 09 Aug 2005
+commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Tue Aug 15 15:13:15 2006 -0400
-* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
- CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
- with the 405 defines and the linux kernel defines.
- Patch by Stefan Roese, 08 Aug 2005
+ Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
-* Fix compiler warnings with older GCC versions
+commit 86c8e17f25e972a7e272950a0735fad84e082b88
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Aug 16 13:59:47 2006 -0500
-* Add common (with Linux) MTD partition scheme and "mtdparts" command
+ * Fix disable_of booting
- Old, obsolete and duplicated code was cleaned up and replace by the
- new partitioning method. There are two possible approaches now:
+ Signed-off-by: Matthew McClintock <msm@freescale.com>
- The first one is to define a single, static partition:
+commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Aug 16 10:54:09 2006 -0500
- #undef CONFIG_JFFS2_CMDLINE
- #define CONFIG_JFFS2_DEV "nor0"
- #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
- #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
- #define CONFIG_JFFS2_PART_OFFSET 0x00000000
+ * Support for FDT in uImage format, error when using FDT from flash
- The second method uses the mtdparts command line option and dynamic
- partitioning:
+ Signed-off-by: Matthew McClintock <msm@freescale.com>
- /* mtdparts command line support */
- #define CONFIG_JFFS2_CMDLINE
- #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
- #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
+commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 15 14:22:35 2006 +0200
- Command line of course produces bigger images, and may be inappropriate
- for some targets, so by default it's off.
+ Add initial support for the ALPR board from Prodrive
+ NAND needs some additional testing
+ Patch by Heiko Schocher, 15 Aug 2006
-* Fix build problems for PM856 Board
+commit f0ff4692ff3372dec55074a8eb444943ab095abb
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 15 14:15:51 2006 +0200
-* Fix sign extension bug in 'fpga loadb' command;
- make 'fpga loadb' always print the file header info
- Patch by Andrew Dyer, 11 Jan 2005
+ Add FPGA Altera Cyclone 2 support
+ Patch by Heiko Schocher, 15 Aug 2006
-* Fix errors that occur when accessing SystemACE CF
- Patch by Jeff Angielski, 09 Jan 2005
+commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Aug 14 15:33:38 2006 -0500
-* Document switching between U-Boot and PlanetCore on RPXlite
- by Sam Song, 24 Dec 2004
+ Fix BAT0 to actually be cacheable, non-guarded as documented.
-* Fix PowerQUICC II mask detection.
- Patch by Eugene Surovegin, 20 Dec 2004
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Add support for Altera NIOS DK1C20 board
- Patch by Shlomo Kut, 13 Dec 2004
+commit 40bc83559db5745681909fd7382ae509567e116d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Aug 9 15:32:16 2006 -0500
-* Add support for ep8248 board
- Patch by Yuli Barcohen, 12 Dec 2004
+ Removed MPC8641HPCN DTS source file from build.
+ It is no longer linked into U-Boot; its sources are
+ now located in the kernel tree.
- Minor code cleanup.
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Fix baudrate setting for KGDB on MPC8260
- Patch by HoJin, 11 Dec 2004
+commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:47:03 2006 -0500
-* Fix 'mii help' text formatting
- Patch by Cory Tusar, 10 Dec 2004
+ * Switched default PCI speed for 8540 ADS back to 33MHz
-* Fix return code of NFS command
- Patch by Hiroshi Ito, 11 Dec 2004
+ * Added comments and a printf to warn that PCI-X won't
+ work at 33MHz
+ Patch by Andy Fleming 17-Mar-2006
-* Fix typo
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Fix compiler warnings in cpu/ppc4xx/usbdev.c
- Patch by Steven Blakeslee, 04 Aug 2005
+commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:46:35 2006 -0500
-* Add support for AMCC Bamboo PPC440EP eval board
- Patch by Stefan Roese, 04 Aug 2005
+ * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
-* Patch by Jon Loeliger
- Fix style issues primarily in 85xx and 83xx boards.
- - C++ comments
- - Trailing white space
- - Indentation not by TAB
- - Excessive amount of empty lines
- - Trailing empty lines
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patch by Ron Alder, 11 Jul 2005
- Add Xianghua Xiao and Lunsheng Wang's support for the
- GDA MPC8540 EVAL board.
+commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:46:13 2006 -0500
-* Patch by Eran Liberty
- Add support for the Freescale MPC8349ADS board.
+ * Added VIA configuration table
-* Patch by Jon Loeliger, 25 Jul 2005
- Move the TSEC driver out of cpu/mpc85xx as it will be shared
- by the upcoming mpc83xx family as well.
+ * Added support for PCI2 on CDS
+ Patch by Andy Fleming 17-Mar-2006
-* Patch by Jon Loeliger, 05 May 2005
- Implemented support for MPC8548CDS board.
- Added DDR II support based on SPD values for MPC85xx boards.
- This roll-up patch also includes bugfies for the previously
- published patches:
- DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patch by Jon Loeliger, 10 Feb 2005
- Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
+commit c88f9fe66b64247e5b6a38410ba315ca25596d16
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:45:41 2006 -0500
-* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
- For MPC85xxCDS:
- Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
- for faster flash parts.
- Add documentation for BR/OR for FLASH.
+ * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
-* Patch by Jon Loeliger 08 Feb 2005
- Determine L2 Cache size dynamically on 85XX boards.
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
- - Convert the CPM2 based functionality to use new CONFIG_CPM2
- option rather than a myriad of CONFIG_MPC8560-like variants.
- Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
- Eliminates the CONFIG_MPC8560 option entirely. Distributes the
- new CONFIG_CPM2 option to each 8260 board.
+commit 97074ed9655309b64231bc2cee69fe85399f8055
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:45:17 2006 -0500
-* Add support for MicroSys PM856 board
- Patch by Josef Wagner, 03 Aug 2005
+ * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
-* Minor fixes to PM854 board
- Patch by Josef Wagner, 03 Aug 2005
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Adjust configuration of XENIAX board
- (chip select and GPIO required for USB operation)
+commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:44:49 2006 -0500
-* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
- routed to the Watchdog handler
- Patch by Eugene Surovegin, 18 Jun 2005
+ * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
-* (re)enabled scsi commands do_scsi() and do_scsiboot()
- Patch by Denis Peter, 06 Dec 2004
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Fix endianess problem in TFTP / NFS default filenames
- Patch by Hiroshi Ito, 06 Dec 2004
+commit a4e11558b810ef2cddffdf7b9d86bc1130441960
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:44:23 2006 -0500
-* Ignore broadcast status bit in received frames in 8260 FCC ethernet
- loopback test code
- Patch by Murray Jensen, 18 Jul 2005
+ * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
-* Fix typo in mkconfig script (used == instead of =)
- Patch by Murray Jensen, 18 Jul 2005
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Cleanup build problems on 64 bit build hosts
+commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:43:36 2006 -0500
-* Update MAINTAINERS file
+ * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
-* Patch by Stefan Roese, 01 Aug 2005:
- - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
- (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
- for details.
- - Sycamore (PPC405GPr) eval board added (Walnut port is extended
- to run on both 405GP and 405GPr eval boards).
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Patch by Steven Blakeslee, 27 Jul 2005:
- - Add support for AMCC PPC440EP/GR.
- - Add support for AMCC Yosemite PPC440EP eval board.
- - Add support for AMCC Yellowstone PPC440GR eval board.
+commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:43:00 2006 -0500
-* Minor fixes for PPChameleon Board:
- - fix alignment of NAND size
- - make code do what the comment says
+ * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
-* Implement h/w sector protection status synchronization at boot.
- The code is provided for, and was tested on, the Yukon/Alaska
- and PM520 boards only.
+commit 5498d90312aad9f6bdbf047986027c35b03cd163
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:42:24 2006 -0500
- A bug in flash_real_protect() for the Yukon board was fixed by
- adding a function that tells if two banks are on one flash chip.
+ * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
-* Fix sysmon POST problem: check I2C error codes
- This fixes a problem of displaying bogus voltages when the voltages
- are so low that the I2C devices start failing while the rest of the
- system keeps running.
+commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:41:37 2006 -0500
-* Patch by Cedric Vincent, 6 Jul 2005:
- Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
+ * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
-* Patch by Jon Loeliger, 20 Jul 2005:
- Add missing PCI IO port definitions.
+commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
+Author: John Traill <john.traill@freescale.com>
+Date: Wed Aug 9 14:33:50 2006 +0100
-* Add CompactFlash support for HMI1001 board.
+ Add Rapidio support for the MPC8641HPCN
-* Adjust printed board ID for LWMON board.
+ Signed-off-by: John Traill <john.traill@freescale.com>
-* Fix low-level OHCI transfers for ARM920t and MPC5xxx
+commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
+Author: John Traill <john.traill@freescale.com>
+Date: Tue Aug 8 11:32:43 2006 +0100
-* Add new argument format for flash commands to allow for usage like
- "erase $(addr) +$(filesize)", i. e. a size argument can be used and
- U-Boot will automaticially find the end of the corresponding sector.
+ Fix caslat calculation
-* Patch by Stefan Roese, 5 Jul 2005:
- Update uc100 board PHY setup
+ Signed-off-by: John Traill <john.traill@freescale.com>
-* Patch by Stefan Roese, 1 Jul 2005:
- Fix PHY address for CATcenter board (now correct!)
+commit 709d3073e74153278e7904a70819bbef7df50e1a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Aug 3 16:17:56 2006 -0500
-* Patch by Stefan Roese, 30 Jun 2005:
- Fix PHY addresses for PPChameleon and CATcenter boards
- Change MAINTAINER for most esd boards
+ Convert to mac-address in ethernet nodes.
-* Patch by Detlev Zundel, 30 Jun 2005:
- Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
+commit 71748af833ca1017edf1415be376366ff2937d17
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Fri Jul 28 12:41:35 2006 -0400
-* Fix baudrate calculation problem on MPC5200 systems
+ Correct the irq value of DUART2
-* Add EEPROM and RTC support for HMI1001 board
+commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Fri Jul 28 12:41:41 2006 -0400
-* Patch by Detlev Zundel, 20 Jun 2005:
- Fix initialization of low active GPIO pins on inka4x0 board
+ Change the space size of PEX IO in README
-* Enable redundant environment, disable HW flash protection of
- HMI1001 board
+commit 239db37c94f7a92941c4465feceb867c609241c5
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Fri Jul 28 12:41:18 2006 -0400
-* Patch by Travis Sawyer, 10 Jun 2005:
- Initialize allocated dev and private hw structures
- after their respective allocation in 440gx_enet.c
+ Move get_board_sys_clk to board directory
-* Patch by Steven Scholz, 10 Jun 2005:
- Fix byteorder problems with second argument of "bootm" with
- standalone images;
+commit 492900b985439fbce1a118afde1e35def870db03
+Author: John Traill <john.traill@freescale.com>
+Date: Fri Jul 28 09:03:54 2006 +0100
-* Add support for HMI1001 board
+ Fix 8641HPCN pollution
-* Disable "date" and "sntp" commands on TQM866M
+commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
+Author: John Traill <john.traill@freescale.com>
+Date: Fri Jul 28 08:16:06 2006 +0100
-* Fix watchdog reset problems on LWMON board
+ Fix 8641HPCN timebase
-* Patch by Juergen Selent, 17 May 2005:
- Add support for Funkwerk VoVPN gateway module.
+commit c86360b830f1eecd7a72208575dde4f57879faea
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Fri Jul 28 00:01:34 2006 +0800
-* Cleanup debug code for MPC8220 FEC driver
+ Fixed OF device tree of mpc86xxhpcn board.
-* Extend burst mode RAM test program to take a loop count
- (0 = infinite)
+ The changes works in with kernel irq mapping rework.
-* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
- those boards that use it.
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
-* Patches by Greg Ungerer, 19 May 2005:
- - add support for the KS8695P (ARM 922 based) CPU
- - add support for the OpenGear CM4008, CM4116 and CM4148 boards
+commit bea3f28d285942bf3f7ab339ce85178ded544225
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Wed Jul 12 10:48:05 2006 -0400
-* Patch by Steven Scholz, 19 May 2005:
- Add support for CONFIG_SERIAL_TAG on ARM boards
+ Add support for reading and writing mac addresses to or from ID EEPROM.
-* Add PCI support for Sorcery board.
- Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
+ Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
+ With attached patch, we can use command "mac/mac read/mac save/"
+ to read and write EEPROM under u-boot prompt.
-* Fix compile problems caused by new burst mode SDRAM test;
- make port pins to trigger logic analyzer configurable
+ U-boot will calculate the checksum of EEPROM while bootup,
+ if it is right, then u-boot will check whether the mac address
+ of eTSEC0/1/2/3 is availalbe (non-zero).
-* Fix timer handling on MPC85xx systems
+ If there is mac address availabe in EEPROM, u-boot will use it,
+ otherewise, u-boot will use the mac address defined in
+ MPC8641HPCN.h. This matches the requirement to set unique mac address
+ for each TSEC port.
-* Fix debug code in omap5912osk flash driver
+ Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+ Signed-off-by: York Sun <yorksun@freescale.com>
-* Add support for MPC8247 based "IDS8247" board.
+commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
+Author: Jin Zhengxiong <Jason.Jin@freescale.com>
+Date: Thu Jul 13 10:35:10 2006 -0500
-* Add support for 2 x TSEC interfaces on the TQM8540 board.
+ Fixed initrd issue by define big RAM
-* On LWMON we must use the watchdog to reset the board as the CPU
- genereated HRESET pulse is too short to reset the external
- circuitry.
+ Signed-off-by:Jason Jin <Jason.jin@freescale.com>
-* Add test tool to exercise SDRAM accesses in burst mode
- (as standalone program, MPC8xx/PowerPC only)
+commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Jul 7 10:01:45 2006 -0500
-* Increase CFG_MONITOR_LEN for Rattler board to match actual code
- size.
+ We made a u-boot patch to fix the hang up issue
+ when booting filesystem from ramdisk.
-* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
- March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
- added to support LZO and LZARI compression modes (undefined by
- default).
+ Signed-off-by:Jason Jin <Jason.jin@freescale.com>
-* Fix problem with symbolic links in JFFS2 code.
+commit 38433ccc5850ee70549af0b2bc5b920355ef5388
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:47:03 2006 -0500
-* Use linker ASSERT statement to prevent undetected overlapping of
- sections on PPChameleon board; other boards might use this, too.
+ * Switched default PCI speed for 8540 ADS back to 33MHz
+ * Added comments and a printf to warn that PCI-X won't
+ work at 33MHz
+ Patch by Andy Fleming 17-Mar-2006
-* Patch by Stefan Roese, 03 May 2005:
- Update for P3G4
- Fix problems in cmd_universe.c
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patch by Matthias Fuchs, 03 May 2005:
- Added missing variable declaration in cmd_nand.c
- Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
+commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:46:35 2006 -0500
-* Fix INKA4x0: use CS1 as gpio_wkup_6 output
+ * Fixed a bug where 8555 PCI code used the old variable and
+ function names
+ Patch by Andy Fleming 17-Mar-2006
-* Fix bug in the SDRAM initialization code for canmb, IceCube and
- PM520 boards.
- Fix PHY address for canmb board.
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Cleanup serial console baudrate calculation on AT91RM9200;
- get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
+commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:46:13 2006 -0500
-* Patch by Matthias Fuchs, 18 Apr 2005:
- Make PCI target address spaces on PMC405 and CPCI405 boards
- configurable via environment variables
+ * Added VIA configuration table
+ * Added support for PCI2 on CDS
+ Patch by Andy Fleming 17-Mar-2006
-* Auto-size RAM on canmb board.
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Add support for canmb board
+commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:45:41 2006 -0500
-* Patch by Stefan Roese, 13 Apr 2005:
- Update for esd apc405
+ * Fixed PCI memory definitions
+ Patch by Andy Fleming 17-Mar-2006
-* Fixes for TQM8560 board:
- - fix clock rates
- - remove debug messages
- - fix flash sector protection
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patch by Steven Scholz, 07 Apr 2005:
- Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
+commit 087454609e47295443af793a282cddcd91a5f49c
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:45:17 2006 -0500
-* Patches by Steven Scholz, 07 Apr 2005:
- Fix compiler warning in altera.c
- Fix warning in cpu/arm920t/at91rm9200/i2c.c
+ * Added support for initializing second PCI bus on 85xx
+ Patch by Andy Fleming 17-Mar-2006
-* Patch by Ladislav Michl, 06 Apr 2005:
- Fix voiceblue configuration.
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patch by Stefan Roese, 06 Apr 2005:
- Updates for OCOTEA board:
- - Changed U-Boot size from 512kByte to 256kByte
- - Fixed flash driver to support boot from soldered user flash
- - Added README for switch from PIBS firmware to U-Boot
+commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:44:49 2006 -0500
-* Patch by Travis Sawyer, 05 Apr 2005:
- - Change timer frequency for ppc 440 from 10 ms to 1 ms.
- Problem found by Andrew Wozniak.
+ * Added PCI-X #defines for PCI-X initialization
+ Patch by Andy Fleming on 17-Mar-2006
-* Patch by Steven Scholz, 06 Apr 2005:
- - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
- - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patches by Robert Whaley, 29 Nov 2004:
- - update the pxa-regs.h file for PXA27x chips
- - add PXA27x based ADSVIX board
- - add support for MMC on PXA27x processors
+commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:44:23 2006 -0500
-* Patch by Andrew E. Mileski, 28 Nov 2004:
- Fix PPC4xx SPD SDRAM detection bug
+ * Made sure the code which disables prefetch for PCI devices
+ sets the size of the prefetch region to 0
+ Patch by Andy Fleming on 17-Mar-2006
-* Patch by Hiroshi Ito, 26 Nov 2004:
- Fix logic of "test -z" and "test -n" commands
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patch by Ladislav Michl, 05 Apr 2005:
- Add support for VoiceBlue board.
+commit 40d5fa35d02df22580593bf0039ab173367e8ef0
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:43:36 2006 -0500
-* Patch by Ladislav Michl, 05 Apr 2005:
- Fix netboot_common() prototypes.
+ * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
+ Patch by Jon Loeliger 17-Jan-2006
-* Patch by Steven Scholz, 05 Apr 2005:
- Use i.MX watchdog timer for reset_cpu()
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Patch by Steven Scholz, 05 Apr 2005:
- Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
- subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
- (now in interupts.c)
+commit be7e8b0cb5a0c49dc180075b96df296a893bf146
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:43:00 2006 -0500
-* Add support for MPC8220 based "sorcery" board.
+ * Removed the oftree.dts for stxxtx in light of the changes
+ to the flat device tree handling code
+ Patch by Matthew McClintock 26-June-2006
-* Add support for TQM8560 board.
+commit 1b380ec225665e73959677f3893dc658c5925e05
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:42:24 2006 -0500
-* Add FEC support for TQM8540 board.
- Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
+ * Patch to modify ft_build.c to update flat device trees in place
+ Patch by Matthew McClintock 26-June-2006
-* Patch by Martin Krause, 04 Apr 2005:
- Update default configuration for CMC_PU2 board.
+commit 98a9c4d468a942a09ebe8979bec508017f3e4462
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:41:37 2006 -0500
-* Patch by Steven Scholz, 04 Apr 2005:
- - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
- - introduce two new configuration options instead:
- CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
+ * Modify bootm command to support booting with flat device trees
+ Patch by Matthew McClintock 26-June-2006
-* Patch by Steven Scholz, 04 Apr 2005:
- Make sure that MDIO clock does not exceed 2.5 MHz on AT91
+commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
+Author: Jin Zhengxiong <Jason.Jin@freescale.com>
+Date: Wed Jun 28 08:43:56 2006 -0500
-* Fix timer code for ARM systems: make sure that udelay() does not
- reset timers so it's save to use udelay() in timeout code.
+ Change Id to symbolic name for RTL8139
-* Patch by Mathias Küster, 23 Nov 2004:
- add udelay support for the mcf5282 cpu
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
-* Patch by Tolunay Orkun, 16 November 2004:
- fix incorrect onboard Xilinx CPLD base address
+commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
+Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
+Date: Tue Jun 27 18:12:10 2006 +0800
-* Patch by Jerry Van Baren, 08 Nov 2004:
- - Add low-boot option for MPC8260ADS board (if lowboot is selected,
- the jumper for the HRCW source should select flash. If lowboot is
- not selected, the jumper for the HRCW source should select the
- BCSR.
- - change default load base address to 0x00400000
+ Fix RTL8139 in big endian
-* Patch by Yuli Barcohen, 08 Nov 2004:
- Add support for Analogue & Micro Rattler boards.
- Tested on Rattler8248.
+ signed-off-by: Jason Jin <Jason.Jin@freescale.com>
+ signed-off-by: Wei Zhang <wei.zhang@freescale.com>
-* Patch by Andre Renaud, 08 Nov 2004:
- Fix watchdog support in common/lcd.c
+commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
+Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
+Date: Tue Jun 27 18:12:23 2006 +0800
-* Patch by Marc Leeman, 05 Nov 2003:
- Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
- bug only affects the XPC8245 processors
+ Fix Tsec bug when no link
-* Patches by Josef Wagner, 29 Oct 2004:
- - Add support for MicroSys CPU87 board
- - Add support for MicroSys PM854 board
+ When tftp a non-exist file from the tftp server, u-boot will check
+ the link of all eth port. The original file will return wrong link
+ state on the no link ports.
-* Patch by Jian Zhang, 02 Nov 2004:
- Add 16-bit NAND support
+ signed-off-by: Jason Jin <Jason.Jin@freescale.com>
-* Patch by Scott McNutt, 01 Nov 2004:
- Add missing NIOS/NIOS2 support for "iminfo" command
+commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
+Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
+Date: Tue Jun 27 18:12:02 2006 +0800
-* Patch by Detlev Zundel, 29 Oct 2004:
- Add missing NIOS/NIOS2 support for "mkimage" tool.
+ Fix bug for io_bar size during pci scan
-* Patch by David Adair, 27 Oct 2004:
- Add missing 440GX SDRAM Controller reset
+ During the pci scan process, Some devices return bar_reponse with the
+ highest bytes 0, such as the pci bridge in uli1575 return bar_response
+ with 0xffffff, So the bar_size should be manually set under 64K.
-* Patch by Steven Scholz, 25 Oct 2004:
- Declare reset_cpu() in include/common.h instead locally
+ Signed-off-by: Jason Jin <jason.jin@freescale.com>
-* Patch by Yusdi Santoso, 22 Oct 2004:
- - Add support for HIDDEN_DRAGON board
- - fix endianess problem in driver/rtl1839.c
+commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
+Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
+Date: Tue Jun 27 18:11:54 2006 +0800
-* Patch by Allen Curtis, 21 Oct 2004:
- support multiple serial ports
+ Enable PCIE1 for MPC8641HPCN board
-* Patch by Richard Klingler, 03 Apr 2005:
- Add call to eth_halt() in net/net.c when called functions fail
- after eth_init() has been called.
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
-* Patch by Sam Song, 3 April 2005:
- - Update README.Netconsole
- - Update README
+commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Jun 22 08:51:46 2006 -0500
-* Prepare for SoC rework of ARM code:
- - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
- - rename memsetup into lowlevel_init (function name and source files)
- Patch by Steven Scholz, 03 Apr 2005:
- - create SoC specific directories include/asm-arm/arch-imx and
- include/asm-arm/arch-s3c24x0
+ Fix bug in 8641hpcn reset command with no args.
-* Fix problems with SNTP support;
- enable SNTP support in some boards.
+ Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
-* Patches by Martin Krause, 01 Apr 2005:
- - Fix flash erase timeout on CMC_PU2
- - Add automatic HW detection for CMC_PU2 and CMC_BASIC
+commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Tue Jun 20 17:47:15 2006 +0800
-* Patch by Steven Scholz, 13 March 2005:
- fix cache enabling for AT91RM9200
+ Reworked IRQ mapping in OF-tree.
-* Patch by Masami Komiya, 30 Mar 2005:
- add SNTP support and expand time server and time offset fields of
- DHCP support. See doc/README.SNTP
+commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Jun 15 21:33:37 2006 -0500
-* Patch by Steven Scholz, 13 Dec 2004:
- Fix bug in at91rm920 ethernet driver
+ Do not enable address translation on secondary CPUs.
+ Do not set up BATs on secondary CPUs. Let Linux do the nasty.
-* Patch by Steven Scholz, 13 Dec 2004:
- Remove duplicated code by merging memsetup.S files for
- at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Patch by Detlev Zundel, 31 Mar 2005:
- Cleanup duplicate definition of overwrite_console()
+commit 8ecc971618f56029ad99d3516f8b297a6ed58971
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jun 7 10:53:55 2006 -0500
-* Update TQM5200 configuration;
- prepare for Rev. 200 starter kit boards
+ Fix a get_board_sys_clk() use-before-def warning.
-* Patch by Scott McNutt, 21 Oct 2004:
- Add support for Nios-II EPCS Controller core.
+ Signed-off-by: Jon Loeliger <jdl@jdl.com>
-* Patch by Scott McNutt, 20 Oct 2004:
- Nios-II cleanups:
- - Add sysid command (Nios-II only).
- - Locate default exception trampoline at proper offset.
- - Implement I/O routines (readb, writeb, etc)
- - Implement do_bootm_linux
+commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jun 7 10:52:49 2006 -0500
-* Patches by Martin Krause, 22 Mar 2005:
- - use TQM5200_auto as MAKEALL target for TQM5200 systems
- - add support for SM501 graphics controller
- - add support for graphic console on TQM5200
- - add support for TQM5200 Rev 200
- - cleanup, fix typo in include/configs/TQM5200.h
+ Allow DTC path to be passed in.
-* Patch by Manfred Baral, 17 Mar 2005:
- Fix typo
+ Signed-off-by: Jon Loeliger <jdl@jdl.com>
-* Fix RTC configuration for PPChameleon board
+commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Tue Jun 6 16:54:29 2006 -0400
-* Cleanup, fix typo in include/configs/TQM5200.h
+ Modify the IRQ of DUART2
-* Patch by Stefan Roese, 16 Mar 2005:
- Update for esd auto_update and hh405 board
+commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed May 31 13:55:35 2006 -0500
-* Adapt for U-Boot image size (new features enabled) on TQM5200
+ Review cleanups.
-* Update code for TQM8540 board (and 85xx in general):
- - Change the name of the Ethernet driver: MOTO ENET -> ENET
- - Reformat boot messages
- - Enable redundant environment
- - Replace the -O2 optimization flag with -mno-string
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Patch by David Brownell, 10 Mar 2005:
- Restore copyright statements in OHCI drivers.
+commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed May 31 12:44:44 2006 -0500
-* Add support for TQM8540 board
+ White space cleanup.
+ Some 80-column cleanups.
+ Convert printf() to puts() where possible.
+ Use #include "spd_sdram.h" as needed.
+ Enhanced reset command usage message a bit.
-* Patch by Detlev Zundel, 14 Mar 2005:
- NC650: changed NAND flash addressing to using UPMB
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Patch by Stefan Roese, 14 Mar 2005:
- Update for esd voh405 fpga image
+commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed May 31 11:39:34 2006 -0500
-* INKA4x0: Allow initialization of LCD backlight dimming from
- "brightness" environment variable.
+ Removed unneeded local_bus_init() from 8641HPCN board.
-* Add port initialization for digital I/O on INKA4x0
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Patch by Stefan Roese, 01 Mar 2005:
- Update for esd boards dp405 and hub405
+commit 4d3d729c16c392d2982d3266b659d333c927697d
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed May 31 11:24:28 2006 -0500
-* Fix get_partition_info() parameter error in all other calls
- (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
+ Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
-* Enable USB and IDE support for INKA4x0 board
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Patch by Andrew Dyer, 28 Feb 2005:
- fix ext2load passing an incorrect pointer to get_partition_info()
- resulting in load failure for devices other than 0
+commit b2a941de060350ad15878d8219825f4950e9bb8e
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed May 31 10:07:28 2006 -0500
-* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
+ Remove dead debug code.
-* Cleanup USB and partition defines
+ Signed-off-by: Jon Loeliger <jdl@jdl.com>
-* Add support for ext2 filesystems and image timestamps to TQM5200 board
+commit 126aa70f10ba3d20e0a6f4d32328250513b77770
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue May 30 17:47:00 2006 -0500
-* Add reset code for Coral-P on INKA4x0 board
+ Move mpc86xx PIXIS code to board directory
-* Patch by Martin Krause, 28 Jun 2004:
- Update for TRAB board.
+ First cut at moving the PIXIS platform code out of
+ the 86xx cpu directory and into board/mpc8641hpcn
+ where it belongs.
-* Fix some missing "volatile"s in MPC5xxx FEC driver
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Fix cirrus voltage detection (for CPC45)
+commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue May 30 09:10:32 2006 -0500
-* Fix byteorder problem in usbboot and scsiboot commands.
+ Improve "reset" command's interaction with watchdog.
-* Patch by Cajus Hahn, 04 Feb 2005:
- - don't insist on leading '/' for filename in ext2load
- - set default partition to useful value (1) in ext2load
+ "reset altbank" will reset another bank WITHOUT watch dog timer enabled
+ "reset altbank wd" will reset another bank WITH watch dog enabled
+ "diswd" will disable watch dog after u-boot boots up successfully
-* Patch by Andrew Dyer, 08 Jan 2005:
- fix wrong return codes in ext2 code
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
-* Removed '--no-warn-mismatch' option from Makefile. This option
- makes 'ld' to overlook binary objects compatibility.
+commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue May 30 08:51:19 2006 -0500
-* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
- --end-group) outside of the group. This will make 'ld' to do
- _multiple_ search in the library group when resolving symbol
- references and do only a _single_ seach in libgcc.a after the group
- search.
+ Fix two SDRAM setup bugs.
-* Fix stability problems on CPC45 board again.
+ Fix ECC setup bug.
+ Enable 1T/2T based on number of DIMMs present.
-* Make image detection for diskboot / usbboot / scsiboot more robust
- (also check header checksum)
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
-* Update CPC45 board configuration.
+commit d11fec5015334deb2010e36ce00bb118cc5429a5
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri May 26 10:24:48 2006 -0500
-* Add USB and PCI support for INKA4x0 board
+ Add first draft of the MPC8641HPCN doc/README.
-* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
+ Signed-off-by: Jon Loeliger <jdl@jdl.com>
-* Code cleanup
+commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri May 26 10:13:04 2006 -0500
-* Patch by Robin Getz, 13 Oct 2004:
- Add standalone application to change SMC91C111 MAC addresses,
- see examples/README.smc91111_eeprom
+ Added pci@8000 block.
+ Updated ethernet interrupt mappings (moved up 48).
+ Cleaned up a few comments.
-* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
- Fix Flash support for ARM Integrator CP.
+ Signed-off-by: Jon Loeliger <jdl@jdl.com>
-* Patch by Richard Woodruff, 10 Jan 2005:
- Update support for OMAP2420 (ARM11) and H4 board:
- o clean up and add new types to H4 memory probe code.
- o fix to work with internal boot.
- o added PRCM config III operation.
- o fix marginal flash timings.
- o add revison ATAG usage.
- o enable voltage scaling at power chip.
- o fix compile error for i2c.
+commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri May 26 10:01:16 2006 -0500
-* Fix network problem (error when receiving multiple ARP packets)
+ Allow args on reset command.
-* Patch by Daniel Poirot, 12 Oct 2004:
- Add support for Wind River sbc405 board
+ Signed-off-by: Jon Loeliger <jdl@jdl.com>
-* Patch by Rainer Brestan, 12 Oct 2004:
- Make examples/Makefile more robust
+commit 14e37081ff3cac7ebe6e93836523429853b6b292
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Fri May 19 13:28:39 2006 -0500
-* Patch by Sam Song, 11 October 2004:
- - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
- - Adjust CPU:BUS frequency ratio 1:1 when core frequency
- less than 50MHz
+ Change arbitration to round-robin for SMP linux.
-* Patch by Sam Song, 10 Oct 2004:
- Fix a parameter error in run_command() in main.c
+commit 9a655876e5995be80f49054e2509500e871e4d3a
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Fri May 19 13:26:34 2006 -0500
-* Patch by Richard Woodruff, 01 Oct 2004:
- add support for the TI OMAP2420 processor and its H4 reference
- board
+ Enable dual DDR controllers and interleaving.
-* Patch by Christian Pellegrin, 24 Sep 2004:
- Added support for NE2000 compatible (DP8390, DP83902) NICs.
+commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Fri May 19 13:22:44 2006 -0500
-* Patch by Leif Lindholm, 23 Sep 2004:
- add support for the AMD db1550 board
+ Update 86xx address map and LAWBARs.
-* Patch by Travis Sawyer, 15 Sep 2004:
- Add CONFIG_SERIAL_MULTI support for ppc4xx,
- update README.serial_multi
+commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Fri May 19 13:14:15 2006 -0500
-* Patches by David Snowdon, 07 Sep 2004:
- - add u-boot.hex target in the top level Makefile
- - add support for the UNSW/NICTA PLEB 2 board (pleb2)
- - use -mtune=xscale and -march=armv5 options for PXA
+ Remove L2 Cache invalidate polling.
-* Patch by Florian Schlote, 08 Sep 2004:
- Add support for SenTec-COBRA5272-board (ColdFire).
+commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Fri May 19 12:33:09 2006 -0500
-* Patch by Gleb Natapov, 07 Sep 2004:
- mpc824x: set PCI latency timer to a sane value
- (is 0 after reset).
+ Enable 2nd CPU and I2C.
-* Patch by Kurt Stremerch, 03 Sep 2004:
- Add bitstream configuration option for fpga command (Xilinx only).
+commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon May 15 07:26:56 2006 -0500
-* Patch by Kurt Stremerch, 03 Sep 2004:
- Add Xilinx Spartan2E family FPGA support
+ Update interrupt mapping.
-* Patch by Jeff Angielski, 02 Sep 2004:
- Add Added support for H2 revision of the EP8260 board.
- Fixed formatting for some of the EP8260 related source files.
+commit 6cfea33477b04b63ed47386ed1629529484c33ba
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 10 09:38:06 2006 -0500
-* Patch by Jon Loeliger, 02 Sep 2004:
- Reset monitor size back to 256 so environment can be written
- to flash on MPC85xx ADS and CDS releases.
+ Remove unneeded INIT_RAM_LOCK cache twiddling.
+ Correctly tracks r29 as global data pointer now.
-* Patch by Paolo Broggini, 02 Sep 2004:
- Make BSS clearing on ARM systems more robust
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
-* Patch by Yue Hu and Joe, 01 Sep 2004:
- - add PCI support for ixp425;
- - add EEPRO100 suppor tfor ixdp425 board.
+commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed May 10 09:33:07 2006 -0500
-* Fix problem with protected sector detection in driver/cfi_flash.c
+ Remove unnecessary flash.c file.
-======================================================================
-Changes for U-Boot 1.1.2:
-======================================================================
+commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue May 9 08:23:49 2006 -0500
-* Code cleanup, mostly for GCC-3.3.x
+ Get MPC8641HPCN flash images working.
-* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
- pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
- additional ethernet addresses.
+ Enable the CFI driver.
+ Remove bogus LAWBAR7 cruft.
+ Use correct TEXT_BASE, Fixup load script.
+ Enable SPD EEPROM during DDR setup.
+ Use generic RFC 1918 IP addresses by default.
-* Cleanup drivers/i82365.c - avoid duplication of code
+commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Apr 27 10:15:16 2006 -0500
-* Fix bogus "cannot span across banks" flash error message
+ Cleanup whitespaces and style issues.
+ Removed //-style comments.
+ Use 80-column lines.
+ Remove trailing whitespace.
+ Remove dead code and debug cruft.
-* Code cleanup
+commit a2320a6bf8113a09544c42d160d10ac69d049a03
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Apr 27 08:22:39 2006 -0500
-* Add support for CompactFlash for the CPC45 Board.
+ Revert bad PCI prefetch limit change.
-* Fix problems with CMC_PU2 flash driver.
+commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Apr 26 17:58:56 2006 -0500
-* Cleanup:
- - avoid trigraph warning in fs/ext2/ext2fs.c
- - rename UC100 -> uc100
-
-* Add support for UC100 board
-
-* Patch by Stefan Roese, 16 Dez 2004:
- - ext2fs support added
- - Tundra universe support added
- - ColdFire MCF5249 support added (no preloader needed!)
- - MCF5249 board TASREG added
- - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
- VOM405, WUH405
- - some esd boards updated
- - memory commands "mdc" and "mwc" added for cyclic read/write
- (CONFIG_MX_CYCLIC, see README for further description)
-
-* Add support for INKA4X0 board
-
-* Patch by Steven Scholz, 12 Dec 2004:
- Fix typo in AT91 memory setup.
-
-* Patch by Martin Krause, 27 Oct 2004:
- - add support for "STK52xx" board (including PS/2 multiplexer)
- - add hardware detection for TQM5200
-
-* Clean up CMC PU2 flash driver
-
-* Update MAINTAINERS file
-
-* Fix bug in MPC823 LCD driver
-
-* Fix udelay() on AT91RM9200 for delays < 1 ms.
-
-* Enable long help on CMC PU2 board;
- fix reset issue;
- increase CPU speed from 179 to 207 MHz.
-
-* Fix smc91111 ethernet driver for Xaeniax board (need to handle
- unaligned tail part specially).
-
-* Update for AT91RM9200DK and CMC_PU2 boards:
- - Enable booting directly from flash
- - fix CMC_PU2 flash driver
-
-* Fix mkimage usage message
-
-* Map SRAM on NC650 board
-
-* Work around for Ethernet problems on Xaeniax board
-
-* Patch by TsiChung Liew, 23 Sep 2004:
- - add support for MPC8220 CPU
- - Add support for Alaska and Yukon boards
-
-* Fix configuration for ERIC board (needs more room)
-
-* Adjust MIPS compiler options at run-time depending on tools version
- ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
- "-mcpu=4kc" for old tools)
-
-* Add passing of the command line and memory size information to the
- kernel on xaeniax board.
-
-* Enable NAND flash support for NC650 board.
-
-* Patch by Thomas Lange 07 Oct 2004:
- Updated README for DBAu1x00 boards to match current status
-
-* Patch by Philippe Robin, 28 Sept 2004:
- Fix Flash support for Versatile.
-
-* Patch by Roger Blofeld, 16 Sep 2004:
- Fix timeout for DHCP command retry
-
-* Patch by Pantelis Antoniou, 14 Sep 2004:
- Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
-
-* Patch by Pantelis Antoniou, 14 Sep 2004:
- Kick watchdog when bz-decompressing
-
-* Fix CFG_HZ problems on AT91RM9200 systems
- [Remember: CFG_HZ should be 1000 on ALL systems!]
-
-* Patch by Gridish Shlomi, 30 Aug 2004:
- - Add support to revA version of PQ27 and PQ27E.
- - Reverted MPC8260ADS baudrate back to original 115200
-
-* Patch by Hojin, 17 Sep 2004:
- Fix typo in cfi_flash.c
-
-* Patch by Mark Jonas, 09 September 2004:
- mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
- error message
-
-* Patch by Mark Jonas, 31 August 2004:
- Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
- improves FTP performance for MPC5200 systems. Enabled for IceCube
- by default.
-
-* Patch by Michael Bendzick, 30 Aug 2004:
- - Improve platform.S code for omap1510inn that detects whether code
- is running from SDRAM or not. Patch allows SDRAM to be configured
- if code is running out of SRAM at 0x20000000.
-
-* Patch by Frederick Klatt, 30 Aug 2004:
- Add support for the Wind River SBC8540/SBC8560 boards
-
-* Configure SX1 board to use drivers/cfi_flash.c
-
-* Patches by Michael Bendzick, 30 Aug 2004:
- - Configure omap1510inn board to use drivers/cfi_flash.c
- - Make drivers/cfi_flash.c protect environment and redundant
- environment.
-
-* Patch by Steven Scholz, 23 Jun 2004:
- - Add script (tools/img2brec.sh) to programm U-Boot into
- (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
-
-* Patches by Scott McNutt, 24 Aug 2004:
- - Add support for Altera Nios-II processors.
- - Add support for Psyent PCI-5441 board.
- - Add support for Psyent PK1C20 board.
-
-* Patches by Jon Loeliger, 24 Aug 2004:
- - Add support for the MPC8541 and MPC8555 CDS boards
- - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
- - Convert MPC85xxADS to use common CFI flash driver
- - Fix PCI window on MPC85xx; remove unneeded PCI initialization
- from board_early_init_f()
- - Provide SW workaround for PCI initialization on 85xx CDS
-
-* Patches by George G. Davis, 24 Aug 2004:
- - Enable ramdisk/initrd tagged param support for omap1610h2_config
- - Remove static network setup defaults from mx1ads_config
- - update ARM boards to use constants from mach-types.h
-
-* Patch by Gary Jennejohn, 04 Oct 2004:
- - fix I2C on at91rm9200
- - add support for Ricoh RS5C372A RTC
-
-* Patch by Gary Jennejohn, 01 Oct 2004:
- - add support for CMC PU2 board
- - add support for I2C on at91rm9200
-
-* Patch by Gary Jennejohn, 28 Sep 2004:
- fix baudrate handling on at91rm9200
-
-* Patch by Yuli Barcohen, 22 Aug 2004:
- - remove ZPC.1900 board-specific flash driver;
- switch the port to generic CFI driver;
- - port clean-up
-
-* Patch by Hinko Kocevar, 21 Aug 2004:
- Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
-
-* Clean up tools/bmp_logo.c to not add trailing white space
-
-* Patch by Hinko Kocevar, 21 Aug 2004:
- - Group common framebuffer functions in common/lcd.c
- - Group common framebuffer macros and #defines in include/lcd.h
- - Provide calc_fbsize() for video ATAG
-
-* Patch by Sam Song, 21 August 2004:
- - Fix a typo in README
- - Align "(RO)" output for "flinfo" after "protect on"
- - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
- ratio 1:1 when core frequency less than 50MHz
-
-* Patches by Hinko Kocevar, 21 Aug 2004:
- - fix some "use of label at end of compound statement" warnings
- - Define type of LCD panel on lubbock board if CONFIG_LCD is used
-
-* Patch by Steven Scholz, 16 Aug 2004:
- - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
- - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
- - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
- - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
- into cpu/arm920t/$(SOC)/
-
-* Patches by Sean Chang, 09 Aug 2004:
- - Added support for both 8 and 16 bit mode access to System ACE CF
- through MPU.
- - Fixed missing System ACE CF device during get FAT partition info
- in fat_register_device function.
- - Enabled System ACE CF support on ML300.
-
-* Patch by Sean Chang, 09 Aug 2004:
- Synch defines for saveenv and do_saveenv functions so they get
- compiled under the same statement.
-
-* Patch by Sean Chang, 09 Aug 2004:
- - Added I2C support for ML300.
- - Added support for ML300 to read out its environment information
- stored on the EEPROM.
- - Added support to use board specific parameters as part of
- U-Boot's environment information.
- - Updated MLD files to support configuration for new features
- above.
-
-* Patches by Travis Sawyer, 05 Aug 2004:
- - Remove incorrect bridge settings for eth group 6
- - Add call to setup bridge in ppc_440x_eth_initialize
- - Fix ppc_440x_eth_init to reset the phy only if its the
- first time through, otherwise, just check the phy for the
- autonegotiated speed/duplex. This allows the use of netconsole
- - only print the speed/duplex the first time the phy is reset.
-
-* Patch by Shlomo Kut, 29 Mar 2004:
- Add support for MKS Instruments "Quantum" board
-
-* Fix build problem with Cogent boards;
- avoid using <asm/byteorder.h> when using the host compiler
-
-* Patch by Ganapathi C, 04 Aug 2004:
- Fix NFS timeout issue
-
-* Patch by Yuli Barcohen, 19 Jul 2004:
- - Fix host tools building in Cygwin environment
- - Fix header files search order for host tools
-
-* Patch by Tom Armistead, 19 Jul 2004:
- Fix kgdb.S support for 74xx_75x cpu
-
-* Patch by Jon Loeliger, 15 Jul 2004:
- Fix MPC85xx I2C driver
-
-* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
-
-* Patch by Stephen Williams, 15 July 2004
- Set the PCI class code for JSE board as part of PCI interface setup
-
-* Patch by Michael Bendzick, 15 Jul 2004:
- Fix problem with writes with odd sizes in drivers/cfi_flash.c when
- CFG_FLASH_USE_BUFFER_WRITE is set
-
-* Patch by Yuli Barcohen, 13 Jul 2004:
- Allow clock setting on MPC866/MPC885 series chips according to
- environment variable `cpuclk'
-
-* Patch by Yuli Barcohen, 20 Apr 2004:
- Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
-
-* Patch by Vincent Dubey, 24 Sep 2004:
- Add support for xaeniax board
-
-* Add comment about non-GPL character of standalone applications to
- COPYING file
-
-* Fix FEC ethernet problem on NSCU board.
-
-* Patch by Gary Jennejohn, 09 Sep 2004:
- allow to use USART1 as console port on at91rm9200dk boards
-
-* Patch by Stefan Roese, 16 Sep 2004:
- Update AR405 board.
-
-* Fix SysClk handling for PPChameleon and CATcenter boards
-
-* Patch by Detlev Zundel, 08 Sep 2004:
- Update etags build target
-
-* Improve NetConsole support: add support for broadcast destination
- address and buffered input.
-
-* Cleanup compiler warnings for GCC 3.3.x and later
-
-* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
-
-* Add support for IDS "NC650" board
-
-* Add automatic update support for LWMON board
-
-* Clear Block Lock-Bits when erasing flash on LWMON board.
-
-* Fix return code of "fatload" command
-
-* Enable MSDOS/VFAT filesystem support for LWMON board
-
-* Patch by Martin Krause, 03 Aug 2004:
- change timing for SM501 graphics controller on TQM5200 module
-
-* Patch by Mark Jonas, 13 July 2004:
- - Total5200 LCD now run in little endian mode. Endianess conversion
- is done in hardware.
- - Removed last reference to "console" environment variable.
-
-* Patches by Lars Munch, 12 Jul 2004:
- - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
- board specific
- - split out the LXT971A PHY from ns_9750_eth.h
- - split the dm9161 phy part out of at91rm9200_ether.c
-
-* Patch by Andreas Engel, 12 Jul 2004:
- Replaced hardcoded PL011 clock frequency with config variable.
- Fixed wrong CONFIG_CMD_DFL doc.
-
-* Patch by Thomas Viehweger, 09 Jun 2004:
- make it possible to remove chpart when there is only one partition
-
-* Add support for console over UDP (compatible to Ingo Molnar's
- netconsole patch under Linux)
-
-* Patch by Jon Loeliger, 16 Jul 2004:
- - support larger DDR memories up to 2G on the PC8540/8560ADS and
- STXGP3 boards
- - Made MPC8540/8560ADS be 33Mhz PCI by default.
- - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
- and CONFIG_L2_INIT_RAM options.
- - Refactor Local Bus initialization out of SDRAM setup.
- - Re-implement new version of LBC11/DDR11 errata workarounds.
- - Moved board specific PCI init parts out of CPU directory.
- - Added TLB entry for PCI-1 IO Memory
- - Updated README.mpc85xxads
-
-* Patch by Sascha Hauer, 28 Jun:
- - add generic support for Motorola i.MX architecture
- - add support for mx1ads, mx1fs2 and scb9328 boards
-
-* Patches by Marc Leeman, 23 Jul 2004:
- - Add define for the PCI/Memory Buffer Configuration Register
- - corrected comments in cpu/mpc824x/cpu_init.c
-
-* Add support for multiple serial interfaces
- (for example to allow modem dial-in / dial-out)
-
-* Patch by Stefan Roese, 15 Jul 2004:
- cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
-
-* Fix NSCU config; add ethernet wakeup code.
-
-* Add link for preloader for Motorola ColdFire to README.m68k
-
-* Patch by Michael Bendzick, 12 Jul 2004:
- fix output formatting in drivers/cfi_flash.c
-
-* Patch by Mark Jonas, 02 Jul 2004:
- Fix lowboot (again) on MPC5xxx
-
-* Patch by Curt Brune, 07 Jul 2004:
- relocate exception vectors on arm720t if needed
-
-* Patch by George G. Davis, 06 Jul 2004:
- - update mach-types.h to latest arm.linux.org.uk master list
- - Set correct OMAP1610 bi_arch_number for build target
-
-* Patch by Curt Brune, 06 Jul 2004:
- evb4510: add support for timer interrupt; cleanup
-
-* Patch by Dan Poirot, 06 Jul 2004:
- Fix sbc8260 environment variables
-
-* Cleanup redundand "console" environment variable
-
-* Patch by Mark Jonas, 05 Jul 2004:
- add support for the Total5100's and Total5200's LCD screen
-
-* Patches by Dan Eisenhut, 01 Jul 2004:
- - README fixes.
- - Move doc2000.h include to prevent compiler warning on some boards
-
-* Patch by Mark Jonas, 01 Jul 2004:
- Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
- MGT5100 and MPC5200 based Freescale platforms.
-
-* Patch by Philippe Robin, 01 Jul 2004:
- Add initialization for Integrator and versatile board files.
-
-* Patch by Hinko Kocevar, 01 Jun 2004:
- Fix VFD FB allocation, add LCD FB allocation on ARM
-
-* Patch by Martin Krause, 30 Jun 2004:
- Add support for TQM5200 board
-
-* Patch by Martin Krause, 29 Jun 2004:
- Add loopw command: infinite write loop on address range
-
-* Patches by Yasushi Shoji, 29 Jun 2004:
- - add empty include/asm-microblaze/processor.h
- - add to CREDITS and MAINTAINERS
- - add gd initialization
- - add MicroBlaze and SUZAKU board to MAKEALL script
- - add reset support for SUZAKU
- - add flush_cache() for MicroBlaze
- - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
- size flash memory on SUZAKU
-
-* Patch by Prakash Kumar, 27 Jun 2004:
- Add support for the PXA250 based Intrinsyc Cerf board.
-
-* Patch by Yasushi Shoji, 27 Jun 2004:
- fix comment in include/common.h
-
-* Rename SBC8560 into sbc8560 for consistency
-
-* Patch by Daniel Poirot, 24 Jun 2004:
- Add support for Wind River's sbc8240 board
-
-* Patches by Yasushi Shoji, 26 Jun 2004:
- - drivers/serial_xuartlite.c: fix "return 0" in void function
- - add microblaze support to mkimage tool
-
-* Patch by Fred Klatt, 25 Jun 2004:
- Add support for WindRiver's sbc8560 board
-
-* Patch by Nicolas Lacressonniere, 24 Jun 2004
- Small Bugs fixes for "at91rm9200dk" board:
- - Timing modifications for SPI DataFlash access
- - Fix NAND flash detection bug
-
-* Patch by Nicolas Lacressonniere, 24 Jun 2004:
- Add Support for Flash AT49BV6416 for AT91RM9200DK board
-
-* Patch by Jon Loeliger, 17 June 2004:
- Completion of the 8540ADS/8560ADS updates:
- Fix some PCI and Rapid I/O memory maps,
- Initialize both TSEC 1 and 2,
- Initialize SDRAM
- Update MAINTAINER for 85xx boards and README.mpc85xxads
-
-* Patch by Yuli Barcohen, 16 Jun 2004:
- Remove obsolete AdderII port which was superseded by unified
- AdderII/Adder87x port
-
-* Patch by Ladislav Michl, 16 Jun 2004:
- Fix gcc-3.3.3 warnings for smc91111.c
-
-* Patch by Stefan Roese, 02 Jul 2004:
- - Fix bug in 405 ethernet driver; allocated data not cleared!
- - Fix problem in 405 i2c driver; don't try to print without console!
-
-* Patch by Paul Ruhland, 11 Jun 2004:
- Remove debug code from 'board/lpd7a40x/flash.c'
-
-* Patch by Andrea Marson, 11 Jun 2004:
- Update for PPChameleon board:
- - support for SysClk @ 25MHz
- - support for Silicon Motion SM712 VGA controller
- - some clean ups
-
-* Patches by Richard Woodruff, 10 Jun 2004:
- - fix problems with examples/stubs.c for GCC >= 3.4
- - fix problems with gd initialization
-
-* Patch by Curt Brune, 17 May 2004:
- - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
- - Add support for ESPD-Inc. EVB4510 Board
-
-* Patch by Marc Leeman, 11 May 2004:
- Fix for MPC8245 - reading PPC Memory from another device with the
- PPC as PCI target device corrupts data due to interenal hardware
- buffering.
-
-* Fix "cls" command when used with splash screen
-
-* Increase NFS download timeout (now 1 min - 10 sec is to short for a
- slow download of a big image)
-
-* Add "cls" function to MPC823 LCD driver so we can reinitialize the
- display even after showing a bitmap
-
-* Patch by Josef Wagner, 04 Jun 2004:
- - DDR Ram support for PM520 (MPC5200)
- - support for different flash types (PM520)
- - USB / IDE / CF-Card / DiskOnChip support for PM520
- - 8 bit boot rom support for PM520/CE520
- - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
- - I2C and RTC support for CPC45
- - support of new flash type (28F160C3T) for CPC45
-
-* Fix flash parameters passed to Linux for PPChameleon board
-
-* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
-
-* Patch by Paul Ruhland, 10 Jun 2004:
- fix support for Logic SDK-LH7A404 board and clean up the
- LH7A404 register macros.
-
-* Patch by Matthew McClintock, 10 Jun 2004:
- Modify code to select correct serial clock on Sandpoint8245
-
-* Patch by Robert Schwebel, 10 Jun 2004:
- Add support for Intel K3 strata flash.
-
-* Patch by Thomas Brand, 10 Jun 2004:
- Fix "loads" command on DK1S10 board
-
-* Patch by Yuli Barcohen, 09 Jun 2004:
- Add support for 8MB flash SIMM and JFFS2 file system on
- Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
-
-* Patch by Yuli Barcohen, 09 Jun 2004:
- Add support for Analogue&Micro Adder87x and the older AdderII board.
-
-* Patch by Ming-Len Wu, 09 Jun 2004:
- Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
-
-* Patch by Sam Song, 09 Jun 2004:
- - Add support for RPXlite_DW board
- - Update FLASH driver for 4*AM29DL323DB90VI
- - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
-
-* Patch by Mark Jonas, 08 June 2004:
- - Make MPC5200 boards evaluate the SVR to print processor name and
- version in checkcpu() (cpu/mpc5xxx/cpu.c).
-
-* Patch by Kai-Uwe Bloem, 06 May 2004:
- Fix endianess problem in cramfs code
-
-* Patch by Tom Armistead, 04 Jun 2004:
- Add support for MAX6900 RTC
-
-* Patches by Ladislav Michl, 03 Jun 2004:
- - fix cfi_flash.c on LE systems
- - let 'make mrproper' delete u-boot.img as well
- - turn printf into debug in cfi_flash.c
-
-* Patch by Kurt Stremerch, 28 May 2004:
- Add support for Exys XSEngine board
-
-* Patch by Martin Krause, 27 May 2004:
- Fix a MPC5xxx I2C timing issue in i2c_probe().
-
-* Patch by Leif Lindholm, 27 May 2004:
- Fix board_init_f() for dbau1x00 board.
-
-* Patch by Imre Deak, 26 May 2004:
- On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
- Set flash base accordingly, and decide whether to do or skip board
- specific setup steps.
-
-* Patch by Josef Baumgartner, 26 May 2004:
- Add missing define in include/asm-m68k/global_data.h
-
-* Patch by Josef Baumgartner, 25 May 2004:
- Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
-
-* Patch by Paul Ruhland, 24 May 2004:
- fix SDRAM initialization for LPD7A400 board.
-
-* Patch by Jian Zhang, 20 May 2004:
- add support for environment in NAND flash
-
-* Patch by Yuli Barcohen, 20 May 2004:
- Add support for Interphase iSPAN boards.
-
-* Patches by Paul Ruhland, 17 May 2004:
- - Add I/O functions to the smc91111 ethernet driver to support the
- Logic LPD7A40x boards.
- - Add support for the Logic Zoom LH7A40x based SDK board(s),
- specifically the LPD7A400.
-
-* Patches by Robert Schwebel, 15 May 2004:
- - call MAC address reading code also for SMSC91C111;
- - make SMSC91C111 timeout configurable, remove duplicate code
- - fix get_timer() for PXA
- - update doc/README.JFFS2
- - use "bootfile" env variable also for jffs2
-
-* Patch by Tolunay Orkun, 14 May 2004:
- Add support for Cogent CSB472 board (8MB Flash Rev)
-
-* Patch by Thomas Viehweger, 14 May 2004:
- - flash.h: more flash types added
- - immap_8260.h: some bits added (useful for RMII)
- - cmd_coninfo.c: typo corrected, printf -> puts
- - reduced size by replacing spaces with tab
-
-* Patch by Robert Schwebel, 13 May 2004:
- Add 'imgextract' command: extract one part of a multi file image.
-
-* Patches by Jon Loeliger, 11 May 2004:
- Dynamically handle REV1 and REV2 MPC85xx parts.
- (Jon Loeliger, 10-May-2004).
- New consistent memory map and Local Access Window across MPC85xx line.
- New CCSRBAR at 0xE000_0000 now.
- Add RAPID I/O memory map.
- New memory map in README.MPC85xxads
- (Kumar Gala, 10-May-2004)
- Better board and CPU identification on MPC85xx boards at boot.
- (Jon Loeliger, 10-May-2004)
- SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
- Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
- (Jim Robertson, 10-May-2004)
- Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
- Supports multiple PHYs.
- (Andy Fleming, 10-May-2004)
- Some README.MPC85xxads updates.
- (Kumar Gala, 10-May-2004)
- Copyright updates for "Freescale"
- (Andy Fleming, 10-May-2004)
-
-* Patch by Stephen Williams, 11 May 2004:
- Add flash support for ST M29W040B
- Reduce JSE specific flash.c to remove dead code.
-
-* Patch by Markus Pietrek, 04 May 2004:
- Fix clear_bss code for ARM systems (all except s3c44b0 which
- doesn't clear BSS at all?)
-
-* Fix "ping" problem on INC-IP board. Strange problem:
- Sometimes the store word instruction hangs while writing to one of
- the Switch registers, but only if the next instruction is 16-byte
- aligned. Moving the instruction into a separate function somehow
- makes the problem go away.
-
-* Patch by Rishi Bhattacharya, 08 May 2004:
- Add support for TI OMAP5912 OSK Board
-
-* Patch by Sam Song May, 07 May 2004:
- Fix typo of UPM table for rmu board
-
-* Patch by Pantelis Antoniou, 05 May 2004:
- - Intracom board update.
- - Add Codec POST.
-
-* Add support for the second Ethernet interface for the 'PPChameleon'
- board.
-
-* Patch by Dave Peverley, 30 Apr 2004:
- Add support for OMAP730 Perseus2 Development board
-
-* Patch by Alan J. Luse, 29 Apr 2004:
- Fix flash chip-select (OR0) option register setting on FADS boards.
-
-* Patch by Alan J. Luse, 29 Apr 2004:
- Report MII network speed and duplex setting properly when
- auto-negotiate is not enabled.
-
-* Patch by Jarrett Redd, 29 Apr 2004:
- Fix hang on reset on Ocotea board due to flash in wrong mode.
-
-* Patch by Dave Peverley, 29 Apr 2004:
- add MAC address detection to smc91111 driver
-
-* Patch by David Müller, 28 Apr 2004:
- fix typo in lib_arm/board.c
-
-* Patch by Tolunay Orkun, 20 Apr 2004:
- - README update: add CONFIG_CSB272 and csb272_config
- - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
- i2cfast environment variable
-
-* Patch by Yuli Barcohen, 19 Apr 2004:
- - Rename DUET_ADS to MPC885ADS
- - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
- - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
- - Clean up FADS family port to use the new defines
-
-* Fix PCI support on CPC45 board
-
-* Patch by Scott McNutt, 25 Apr 2004:
- Add Nios GDB/JTAG Console support:
- - Add stubs to support gdb via JTAG.
- - Add support for console over JTAG.
- - Minor cleanup.
-
-* Add support for CATcenter board (based on PPChameleon ME module)
-
-* Patch by Klaus Heydeck, 12 May 2004:
- Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
- load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
- various changes to KUP4 board specific files
-
-* Fix minor network problem on MPC5200: need some delay between
- resetting the PHY and sending the first packet. Implemented in a
- "natural" way by invoking the PHY reset and initialization code
- only once after power on vs. each time the interface is brought up.
-
-* Add some limited support for low-speed devices to SL811 USB controller
- (at least "usb reset" now passes successfully and "usb info" displays
- correct information)
-
-* Change init sequence for multiple network interfaces: initialize
- on-chip interfaces before external cards.
-
-* Fix memory leak in the NAND-specific JFFS2 code
-
-* Fix SL811 USB controller when attached to a USB hub
-
-* Fix config option spelling in PM520 config file
-
-* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
- patches by Pantelis Antoniou, 30 Mar 2004)
-
-* Fix minor NAND JFFS2 related issue
-
-* Fixes for SL811 USB controller:
- - implement workaround for broken memory stick
- - improve error handling
-
-* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
- cope with congested networks.
-
-======================================================================
-Changes for U-Boot 1.1.1:
-======================================================================
-
-* Patch by Travis Sawyer, 23 Apr 2004:
- Fix VSC/CIS 8201 phy descrambler interoperability timing due to
- errata from Vitesse Semiconductor.
-
-* Patch by Philippe Robin, 22 Apr 2004:
- Fix ethernet configuration for "versatile" board
-
-* Patch by Kshitij Gupta, 21 Apr 2004:
- Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
-
-* Patch by Steven Scholz, 24 Feb 2004:
- Fix a bug in AT91RM9200 ethernet driver:
- The MII interface is now initialized before accessing the PHY.
-
-* Patch by John Kerl, 19 Apr 2004:
- Use U-boot's miiphy.h for PHY register names, rather than
- introducing a new header file.
-
-* Update pci_ids.h from linux-2.4.26
-
-* Patch by Masami Komiya, 19 Apr 2004:
- Fix problem cause by VLAN function on little endian architecture
- without VLAN environment
-
-* Clean up the TQM8xx_YYMHz configurations; allow to use the same
- binary image for all clock frequencies. Implement run-time
- optimization of flash access timing based on the actual bus
- frequency.
-
-* Modify KUP4X board configuration to use SL811 driver for USB memory
- sticks (including FAT / VFAT filesystem support)
-
-* Add SL811 Host Controller Interface driver for USB
-
-* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
-
-* Patch by Pantelis Antoniou, 19 Apr 2004:
- Allow to use shell style syntax (i. e. ${var} ) with standard parser.
- Minor patches for Intracom boards.
-
-* Patch by Christian Pell, 19 Apr 2004:
- cleanup support for CF/IDE on PCMCIA for PXA25X
-
-* Temporarily disabled John Kerl's extended MII command code because
- "miivals.h" is missing
-
-* Patches by Mark Jonas, 13 Apr 2004:
- - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
- - Add sync instructions to IceCube SDRAM init code
- - Move SDRAM chip constants into seperate include files
- - Unify DDR and SDR initialization code
- - Unify all IceCube (Lite5xxx) target names
-
-* Patch by John Kerl, 16 Apr 2004:
- Enable ranges in mii command, e.g. mii read 0-1f 0 or
- mii read 4-7 18-1a. Also add mii dump subcommand for
- pretty-printing standard regs 0-5.
-
-* Patch by Stephen Williams, 16 April 2004:
- fix typo in JSE.h; update MAINTAINERS
-
-* Patch by Matthew S. McClintock, 14 Apr 2004:
- fix initdram function for utx8245 board
-
-* Patch by Markus Pietrek, 14 Apr 2004:
- use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
-
-* Patch by Reinhard Meyer, 18 Apr 2004:
- provide the IDE Reset Function for EMK 5200 boards
-
-* Patch by Masami Komiya, 12 Apr 2004:
- fix pci_hose_write_config_{byte,word}_via_dword problems
-
-* Patch by Sangmoon Kim, 12 Apr 2004:
- Update max RAM size for debris board
-
-* Patch by Travis Sawyer, 08 Apr 2004:
- Add TLB entry for second DIMM slot on ocotea
-
-* Patch by Masami Komiya, 08 Apr 2004:
- add RTL8169 network driver
-
-* Patch by Dan Malek, 07 Apr 2004:
- - Add support for RPC/STx GP3, Motorola 8560 board
- - Update 85xx TSEC driver so it searches MII for first available PHY
- and uses that one.
- - Add functions to support console MII commands.
-
-* Patch by Tolunay Orkun, 07 Apr 2004:
- Move initialization of bi_iic_fast[]
- from board_init_f() to board_init_r()
-
-* Patch by Yasushi Shoji, 07 Apr 2004:
- Cleanup microblaze port
-
-* Patch by Sangmoon Kim, 07 Apr 2004:
- Add auto SDRAM module detection for Debris board
-
-* Patch by Rune Torgersen, 06 Apr 2004:
- - Fix some PCI problems on the MPC8266ADS board
- - Fix the location of some PCI entries in the immap structure
-
-* Patch by Yasushi Shoji, 07 Apr 2004:
- - add support for microblaze processors
- - add support for AtmarkTechno "suzaku" board
-
-* Configure PPChameleon board to use redundand environment in flash
-
-* Configure PPChameleon board to use JFFS2 NAND support.
-
-* Added support for JFFS2 filesystem (read-only) on top of NAND flash
-
-* Patch by Rune Torgersen, 16 Apr 2004:
- LBA48 fixes
-
-* Patches by Pantelis Antoniou, 16 Apr 2004:
- - add support for a new version of an Intracom board and fix
- various other things on others.
- - add verify support to the crc32 command (define
- CONFIG_CRC32_VERIFY to enable it)
- - fix FEC driver for MPC8xx systems:
- 1. fix compilation problems for boards that use dynamic
- allocation of DPRAM
- 2. shut down FEC after network transfers
- - HUSH parser fixes:
- 1. A new test command was added. This is a simplified version of
- the one in the bourne shell.
- 2. A new exit command was added which terminates the current
- executing script.
- 3. Fixed handing of $? (exit code of last executed command)
- - Fix some compile problems;
- add "once" functionality for the netretry variable
-
-* Patch by George G. Davis, 02 Apr 2004:
- add support for Intel Assabet board
-
-* Patch by Stephen Williams, 01 Apr 2004:
- Add support for Picture Elements JSE board
-
-* Patch by Christian Pell, 01 Apr 2004:
- Add CompactFlash support for PXA systems.
-
-* Patches by Pantelis Antoniou, 30 Mar 2004:
- - add auto-complete support to the U-Boot CLI
- - add support for NETTA and NETPHONE boards; fix NETVIA board
- - add support for the Epson 156x series of graphical displays
- (These displays are serial and not suitable for using a normal
- framebuffer console on them)
- - add infrastructure needed in order to POST any DSPs in a board
- - improve and fix various things in the MPC8xx FEC driver:
- 1. The new 87x and 88x series of processors have two FECs,
- and the new driver supports them both.
- 2. Another change in the 87x/88x series is support for
- the RMII (Reduced MII) interface. However numerous
- changes are needed to make it work since the PHYs
- are connected to the same lines. That means that
- you have to address them correctly over the MII
- interface.
- 3. We now correctly match the MII/RMII interface
- configuration to what the PHY reports.
- - Fix problem when readingthe MII status register. Due to the
- internal design of many PHYs you have to read the register
- twice. The problem is more apparent in 10Mbit mode.
- - add new mode ".jffs2s" for reading from a NAND device: it just
- skips over bad blocks.
- - add networking support for VLANs (802.1q), and CDP (Cisco
- Discovery Protocol)
- - some minor patches / cleanup
-
-* Patch by Yuli Barcohen, 28 Mar 2004:
- - Add support for MPC8272 family including MPC8247/8248/8271/8272
- - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
- - Change configuration method for MPC8260ADS family
-
-* add startup code to clear the BSS of standalone applications
-
-* Fix if / elif handling bug in HUSH shell
-
-======================================================================
-Changes for U-Boot 1.1.0:
-======================================================================
-
-* Patch by Mark Jonas: Remove config.tmp files only when
- unconfiguring the board
-
-* Adapt RMU board for bigger flash memory
-
-* Patch by Klaus Heydeck, 13 Mar 2003:
- Add support for KUP4X Board
-
-* Patch by Pavel Bartusek, 21 Mar 2004
- Add Reiserfs support
-
-* Patch by Hinko Kocevar, 20 Mar 2004
- - Add auto-release for SMSC LAN91c111 driver
- - Add save/restore of PTR and PNR regs as suggested in datasheet
-
-* Patch by Stephen Williams, 19 March 2004
- Increase speed of sector reads from SystemACE,
- shorten poll timeout and remove a useless reset
-
-* Patch by Tolunay Orkun, 19 Mar 2004:
- Make GigE PHY 1000Mbps Speed/Duplex detection conditional
- (CONFIG_PHY_GIGE)
-
-* Patch by Brad Kemp, 18 Mar 2004:
- prevent machine checks during a PCI scan
-
-* Patch by Pierre Aubert, 18 Mar 2004:
- Fix string cleaning in IDE identification
-
-* Patch by Pierre Aubert, 18 Mar 2004:
- - Unify video mode handling for Chips & Technologies 69000 Video
- chip and Silicon Motion SMI 712/710/810 Video chip
- - Add selection of the video output (CRT or LCD) via 'videoout'
- environment variable for the Silicon Motion
- - README update
-
-* Patch by Pierre Aubert, 18 Mar 2004:
- include/common.h typo fix
-
-* Patches by Tolunay Orkun, 17 Mar 2004:
- - Add support for bd->bi_iic_fast[] initialization via environment
- variable "i2cfast" (CONFIG_I2CFAST)
- - Add "i2cfast" u-boot environment variable support for csb272
-
-* Patch by Carl Riechers, 17 Mar 2004:
- Ignore '\0' characters in console input for use with telnet and
- telco pads.
-
-* Patch by Leon Kukovec, 17 Mar 2004:
- typo fix for strswab prototype #ifdef
-
-* Patches by Thomas Viehweger, 16 Mar 2004:
- - show PCI clock frequency on MPC8260 systems
- - add FCC_PSMR_RMII flag for HiP7 processors
- - in do_jffs2_fsload(), take load address from load_addr if not set
- explicit, update load_addr otherwise
- - replaced printf by putc/puts when no formatting is needed
- (smaller code size, faster execution)
-
-* Patch by Phillippe Robin, 16 Mar 2004:
- avoid dereferencing NULL pointer in lib_arm/armlinux.c
-
-* Patch by Stephen Williams, 15 Mar 2004:
- Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
-
-* Patch by Tolunay Orkun, 15 Mar 2004:
- Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
-
-* Patch by Travis Sawyer, 15 Mar 2004:
- Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
-
-* Add start-up delay to make sure power has stabilized before
- attempting to switch on USB on SX1 board.
-
-* Patch by Josef Wagner, 18 Mar 2004:
- - Add support for MicroSys XM250 board (PXA255)
- - Add support for MicroSys PM828 board (MPC8280)
- - Add support for 32 MB Flash on PM825/826
- - new SDRAM refresh rate for PM825/PM826
- - added support for MicroSys PM520 (MPC5200)
- - replaced Query by Identify command in CPU86/flash.c
- to support 28F160F3B
-
-* Fix wrap around problem with udelay() on ARM920T
-
-* Add support for Macronix flash on TRAB board
-
-* Patch by Pierre Aubert, 15 Mar 2004:
- Fix buffer overflow in IDE identification
-
-* Fix power-off of LCD for out-of-band temperatures on LWMON board
-
-* Remove redundand #define in IceCube.h
-
-* Patch by Steven Scholz, 27 Feb 2004:
- - Adding get_ticks() and get_tbclk() for AT91RM9200
- - Many white space fixes in cpu/at91rm9200/interrupts.c
-
-* Patches by Steven Scholz, 20 Feb 2004:
- some cleanup in AT91RM9200 related code
-
-* Patches by Travis Sawyer, 12 Mar 2004:
- - Fix Gigabit Ethernet support for 440GX
- - Add Gigabit Ethernet Support to MII PHY utilities
-
-* Patch by Brad Kemp, 12 Mar 2004:
- Fixes for drivers/cfi_flash.c:
- - Better support for x8/x16 implementations
- - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
- - Added defines for AMD command and address constants
-
-* Patch by Leon Kukovec, 12 Mar 2004:
- Fix get_dentfromdir() to correctly handle deleted dentries
-
-* Patch by George G. Davis, 11 Mar 2004:
- Remove hard coded network settings in TI OMAP1610 H2
- default board config
-
-* Patch by George G. Davis, 11 Mar 2004:
- add support for ADS GraphicsClient+ board.
-
-* Patch by Pierre Aubert, 11 Mar 2004:
- - add bitmap command and splash screen support in cfb console
- - add [optional] origin in the bitmap display command
-
-* Patch by Travis Sawyer, 11 Mar 2004:
- Fix ocotea board early init interrupt setup.
-
-* Patch by Thomas Viehweger, 11 Mar 2004:
- Remove redundand code; add PCI-specific bits to include/mpc8260.h
-
-* Patch by Stephan Linz, 09 Mar 2004
- - Add support for the SSV ADNP/ESC1 (Nios Softcore)
-
-* Patch by George G. Davis, 9 Mar 2004:
- fix recent build failure for SA1100 target
-
-* Patch by Travis Sawyer, 09 Mar 2004:
- Support native interrupt mode for the IBM440GX.
- Previously it was running in 440GP compatibility mode.
-
-* Patch by Philippe Robin, 09 Mar 2004:
- Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
- Platform support.
-
-* Patch by Masami Komiya, 08 Mar 2004:
- Don't overwrite server IP address or boot file name
- when the boot server does not return values
-
-* Patch by Tolunay Orkun, 5 Mar 2004:
- Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
-
-* Patch by Tolunay Orkun, 5 Mar 2004:
- Fix early board initialization for Cogent CSB272 board
-
-* Patch by Ed Okerson, 3 Mar 2004:
- fix CFI flash writes for little endian systems
-
-* Patch by Reinhard Meyer, 01 Mar 2004:
- generalize USB and IDE support for MPC5200 with according
- changes to IceCube.h and TOP5200.h
- add Am29LV256 256 MBit FLASH support for TOP5200 boards
- add info about USB and IDE to README
-
-* Patch by Yuli Barcohen, 4 Mar 2004:
- Fix problems with GCC 3.3.x which changed handling of global
- variables explicitly initialized to zero (now in .bss instead of
- .data as before).
-
-* Patch by Leon Kukovec, 02 Mar 2004:
- add strswab() to fix IDE LBA capacity, firmware and model numbers
- on little endian machines
-
-* Patch by Masami Komiya, 02 Mar 2004:
- - Remove get_ticks() from NFS code
- - Add verification of RPC transaction ID
-
-* Patch by Pierre Aubert, 02 Mar 2004:
- cleanup for IDE and USB drivers for MPC5200
-
-* Patch by Travis Sawyer, 01 Mar 2004:
- Ocotea:
- - Add IBM PPC440GX Ref Platform support (Ocotea)
- Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
- Adapted to U-Boot and 440GX port
- 440gx_enet.c:
- - Add gracious handling of all Ethernet Pin Selections for 440GX
- - Add RGMII selection for Cicada CIS8201 Gigabit PHY
- ppc440.h:
- - Add needed bit definitions
- - Fix formatting
-
-* Patch by Carl Riechers, 1 Mar 2004:
- Add PPC440GX prbdv0 divider to fix memory clock calculation.
-
-* Patch by Stephan Linz, 27 Feb 2004
- - avoid problems for targets without NFS download support
-
-* Patch by Rune Torgersen, 27 Feb 2004:
- - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
- - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
- - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
-
-* Patch by Masami Komiya, 27 Feb 2004:
- Fix rarpboot: add autoload by NFS
-
-* Patch by Dan Eisenhut, 26 Feb 2004:
- fix flash_write return value in saveenv
-
-* Patch by Stephan Linz, 11 Dec 2003
- expand config.mk to avoid trigraph warnings on NIOS
-
-* Rename "BMS2003" board into "HMI10"
-
-* SX1 patches: use "serial#" for USB serial #; use redundand environment
- storage; auto-set console on USB port (using preboot command)
-
-* Add support for SX1 mobile phone; add support for USB-based console
- (enable with "setenv stdout usbtty; setenv stdin usbtty")
-
-* Fix LOWBOOT configuration for MPC5200 with DDR memory
-
-* Fix SDRAM timings for LITE5200 / IceCube board
-
-* Handle Auti-MDIX / connection status for INCA-IP
-
-* Fix USB problems when attempting to read 0 bytes
-
-* Patch by Travis Sawyer, 26 Feb 2004:
- Fix broken compile for XPEDITE1K target.
-
-* Patch by Stephan Linz, 26 Feb 2004:
- Bug fix for NFS code on NIOS targets
-
-* Patch by Stephen Williams, 26 Feb 2004:
- Break up SystemACE reads of large block counts
-
-* Patch by Pierre Aubert, 26 Feb 2004
- add IDE support for MPC5200
-
-* Patch by Masami Komiya, 26 Feb 2004:
- add autoload via NFS
-
-* Patch by Stephen Williams
- Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
- elsewhere in the source.
-
-* Patch by Steven Scholz, 25 Feb 2004:
- - Timeouts in FPGA code should be based on CFG_HZ
- - Minor cleanup in code for Altera FPGA ACEX1K
-
-* Patch by Steven Scholz, 25 Feb 2004:
- Changed "Directory Hierarchy" section in README
-
-* Patch by Masami Komiya, 25 Feb 2004:
- Reduce copy count in nfs_read_reply() of NFS code
-
-* Patch by Markus Pietrek, 24 Feb 2004:
- NS9750 DevBoard added
-
-* Patch by Pierre Aubert, 24 Feb 2004
- add USB support for MPC5200
-
-* Patch by Steven Scholz, 24 Feb 2004:
- - fix MII commands to use values from last command
-
-* Patch by Torsten Demke, 24 Feb 2004:
- Add support for the eXalion platform (SPSW-8240, F-30, F-300)
-
-* Patch by Rahul Shanbhag, 19 Feb 2004:
- Fixes for for OMAP1610 board:
- - shift some IRQ specific code to platform.S file
- - remove duplicatewatchdog reset code from start.S
-
-* Make Auto-MDIX Support configurable on INCA-IP board
-
-* Fix license for mkimage tool
-
-* Patch by Masami Komiya, 24 Feb 2004:
- Update NetBootFileXferSize in NFS code
-
-* Patch by Scott McNutt, 24 Feb 2004:
- fix packet length in NFS code
-
-* Patch by Masami Komiy, 22 Feb 2004:
- Add support for NFS for file download
-
-* Patch by Andrea Scian, 17 Feb 2004:
- Add support for S3C44B0 processor and DAVE B2 board
-
-* Patch by Steven Scholz, 20 Feb 2004:
- - Add support for MII commands on AT91RM9200 boards
- - some cleanup in AT91RM9200 ethernet code
-
-* Patch by Peter Ryser, 20 Feb 2004:
- Add support for the Xilinx ML300 platform
-
-* Patch by Stephan Linz, 17 Feb 2004:
- Fix watchdog support for NIOS
-
-* Patch by Josh Fryman, 16 Feb 2004:
- Fix byte-swapping for cfi_flash.c for different bus widths
-
-* Patch by Jon Diekema, 14 Jeb 2004:
- Remove duplicate "FPGA Support" notes from the README file
-
-* Patches by Reinhard Meyer, 14 Feb 2004:
- - update board/emk tree; use common flash driver
- - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
- [adapted for other PPC CPUs -- wd]
- - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
-
-* Patch by Jon Diekema, 13 Feb 2004:
- Call show_boot_progress() whenever POST "FAILED" is printed.
-
-* Patch by Nishant Kamat, 13 Feb 2004:
- Add support for TI OMAP1610 H2 Board
- Fixes for cpu/arm926ejs/interrupt.c
- (based on Richard Woodruff's patch for arm925, 16 Oct 03)
- Fix for a timer bug in OMAP1610 Innovator
- Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
-
-* Patches by Stephan Linz, 12 Feb 2004:
- - add support for NIOS timer with variable period preload counter value
- - prepare POST framework support for NIOS targets
-
-* Patch by Denis Peter, 11 Feb 2004:
- add POST support for the MIP405 board
-
-* Patch by Laurent Mohin, 10 Feb 2004:
- Fix buffer overflow in common/usb.c
-
-* Patch by Tolunay Orkun, 10 Feb 2004:
- Add support for Cogent CSB272 board
-
-* Patch by Thomas Elste, 10 Feb 2004:
- Add support for NET+50 CPU and ModNET50 board
-
-* Patch by Sam Song, 10 Feb 2004:
- Fix typos in cfi_flash.c
-
-* Patch by Leon Kukovec, 10 Feb 2004
- Fixed long dir entry slot id calculation in get_vfatname
-
-* Patch by Robin Gilks, 10 Feb 2004:
- add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
- !=, <>, <, >, <=, >=)
-
-* Fix problem with side effects in macros in include/usb.h
-
-* Patch by David Benson, 13 Nov 2003:
- bug 841358 - fix TFTP download size limit
-
-* Fixing bug 850768:
- improper flush_cache() in load_serial()
-
-* Fixing bug 834943:
- MPC8540 - missing volatile declarations
-
-* Patch by Stephen Williams, 09 Feb 2004:
- Add support for Xilinx SystemACE chip:
- - New files common/cmd_ace.c and include/systemace.h
- - Hook systemace support into cmd_fat and the partition manager
-
-* Patch by Travis Sawyer, 09 Feb 2004:
- Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
-
-* Patch by Travis Sawyer, 09 Feb 2004:
- o 440GX:
- - Fix PCI Indirect access for type 1 config cycles with ppc440.
- - Add phymode for 440 enet
- - fix pci pre init
- o XPedite1K:
- - Change board_pre_init to board_early_init_f
- - Add user flash to bus controller setup
- - Fix pci pre init
- - Fix is_pci_host to check GPIO for monarch bit
- - Force xpedite1k to pci conventional mode (via #define option)
-
-* Patch by Brad Kemp, 4 Feb 2004:
- - handle the machine check that is generated during the PCI scans
- on 82xx processors.
- - define the registers used in the IMMR by the PCI subsystem.
-
-* Patch by Pierre Aubert, 03 Feb 2004:
- cpu/mpc5xxx/start.S: copy MBAR into SPR311
-
-* Patch by Jeff Angielski, 03 Feb 2004:
- Fix copy & paste error in cpu/mpc8260/pci.c
-
-* Patch by Reinhard Meyer, 24 Jan 2004:
- Fix typo in cpu/mpc5xxx/pci_mpc5200.c
-
-* Add Auto-MDIX support for INCA-IP
-
-* Some code cleanup
-
-* Patch by Josef Baumgartner, 10 Feb 2004:
- Fixes for ColdFire port
-
-* Patch by Brad Kemp, 11 Feb 2004:
- Fix CFI flash driver problems
-
-* Make sure to use a bus clock divider of 2 only when running TQM8xxM
- modules at CPU clock frequencies above 66 MHz.
-
-* Optimize flash programming speed for LWMON (by another 100% :-)
-
-* Patch by Jian Zhang, 3 Feb 2004:
- - Changed the incorrect FAT12BUFSIZE
- - data_begin in fsdata can be negative. Changed it to be short.
-
-* Patches by Stephan Linz, 30 Jan 2004:
- 1: - board/altera/common/flash.c:flash_erase():
- o allow interrupts befor get_timer() call
- o check-up each erased sector and avoid unexpected timeouts
- - board/altera/dk1c20/dk1s10.c:board_early_init_f():
- o enclose sevenseg_set() in cpp condition
- - remove the ASMI configuration for DK1S10_standard_32 (never present)
- - fix some typed in mistakes in the NIOS documentation
- 2: - split DK1C20 configuration into several header files:
- o two new files for each NIOS CPU description
- o U-Boot related part is remaining in DK1C20.h
- 3: - split DK1S10 configuration into several header files:
- o two new files for each NIOS CPU description
- o U-Boot related part is remaining in DK1S10.h
- 4: - Add support for the Microtronix Linux Development Kit
- NIOS CPU configuration at the Altera Nios Development Kit,
- Stratix Edition (DK-1S10)
- 5: - Add documentation for the Altera Nios Development Kit,
- Stratix Edition (DK-1S10)
- 6: - Add support for the Nios Serial Peripharel Interface (SPI)
- (master only)
- 7: - Add support for the common U-Boot SPI framework at
- RTC driver DS1306
-
-* Patch by Rahul Shanbhag, 28 Jan 2004:
- Fix flash protection/locking handling for OMAP1610 innovator board.
-
-* Patch by Rolf Peukert, 28 Jan 2004:
- fix flash write problems on CSB226 board (write with 32 bit bus width)
-
-* Patches by Mark Jonas, 16 Jan 2004:
- - fix rounding error when calculating baudrates for MPC5200 PSCs
- - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
- time which is not supported
-
-* Patch by Yuli Barcohen, 26 Jan 2004:
- Allow bzip2 compression for small memory footprint boards
-
-* Patch by Brad Kemp, 21 Jan 2004:
- Add support for CFI flash driver for both the Intel and the AMD
- command sets.
-
-* Patch by Travis Sawyer, 20 Jan 2004:
- Fix pci bridge auto enumeration of sibling p2p bridges.
-
-* Patch by Tolunay Orkun, 12 Jan 2004:
- Add some delays as needed for Intel LXT971A PHY support
-
-* Patches by Stephan Linz, 09 Jan 2004:
- - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
- - make DK1C20 board configuration related to ASMI conform to
- documentation
-
-* Patch by Anders Larsen, 09 Jan 2004:
-
- ARM memory layout fixes: the abort-stack is now set up in the
- correct RAM area, and the BSS is zeroed out as it should be.
-
- Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
- of the linker scripts are replaced by '__bss_start' and '_end',
- resp., which is a further step to eliminate unnecessary differences
- between the implementation of the CPU architectures.
-
-* Patch by liang a lei, 9 Jan 2004:
- Fix Intel 28F128J3 ID in include/flash.h
-
-* Patch by Masami Komiya, 09 Jan 2004:
- add support for TB0229 board (NEC VR4131 MIPS processor)
-
-* Patch by Leon Kukovec, 12 Dec 2003:
- changed extern __inline__ into static __inline__ in
- include/linux/byteorder/swab.h
-
-* Patch by Travis Sawyer, 30 Dec 2003:
- Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
- select MDI port based on enabled EMAC device.
- Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
- base PrPMC board.
-
-* Patch by Wolter Kamphuis, 15 Dec 2003:
- made CONFIG_SILENT_CONSOLE usable on all architectures
-
-* Disable date command on TQM866M - there is no RTC on MPC866
-
-* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
-
-* Implement adaptive SDRAM timing configuration based on actual CPU
- clock frequency for INCA-IP; fix problem with board hanging when
- switching from 150MHz to 100MHz
-
-* Add PCMCIA CS support for BMS2003 board
-
-* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
- see doc/README.MPC866 for details;
- implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
- calculate CPU clock frequency from PLL register values.
-
-* Add support for 128 MB RAM on TQM8xxL/M modules
-
-* Fix PS/2 keyboard problem caused by statically initialized variable
- pointing to a location in flash
-
-* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
-
-* The PS/2 mux on the BMS2003 board needs 450 ms after power on
- before we can access it; add delay in case we are faster (with no
- CF card inserted)
-
-* Cleanup of some init functions
-
-* Make sure SCC Ethernet is always stopped by the time we boot Linux
- to avoid Linux crashes by early packets coming in.
-
-* Accelerate flash accesses on LWMON board by using buffered writes
-
-* Fix typo in Makefile;
- fix problem with PARTNUM detection
-
-* Patch by Reinhard Meyer, 09 Jan 2004:
- - add RTC support for MPC5200 based boards (requires RTC_XTAL)
-
-* Add support for IDE LED on BMS2003 board
- (exclusive with status LED!)
-
-* Add support for PS/2 keyboard (used with PS/2 multiplexor on
- BMS2003 board)
-
-* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
- Add common files for "emk" boards
-
-* Add a common get_ram_size() function and modify the the
- board-specific files to invoke that common implementation.
-
-======================================================================
-Changes for U-Boot 1.0.1:
-======================================================================
-
-* Set default clock for INCA-IP to 150 MHz
-
-* Make BMS2003 use a separate config file to avoid #ifdef mess;
- add I2C support; add support for DS1337 RTC
-
-* Add CompactFlash support for BMS2003 board
-
-* Add support for status LED on BMS2003 board
-
-* Patch by Scott McNutt, 02 Jan 2004:
- Add support for the Nios Active Serial Memory Interface (ASMI)
- on Cyclone devices
-
-* Patch by Andrea Marson, 16 Dec 2003:
- Add support for the PPChameleon ME and HI modules
-
-* Patch by Yuli Barcohen, 22 Dec 2003:
- Add support for Motorola DUET ADS board (MPC87x/88x)
-
-* Patch by Robert Schwebel, 15 Dec 2003:
- add support for cramfs (uses JFFS2 command interface)
-
-* Patches by Stephan Linz, 11 Dec 2003:
- - more documentation for NIOS port
- - new struct nios_pio_t, struct nios_spi_t
- - Reconfiguration for NIOS Development Kit DK1C20:
- o move board related code from board/dk1c20
- to board/altera/dk1c20
- o create a new common source path board/altera/common
- and move generic flash access stuff into it
- o change/expand configuration file DK1C20.h
- - Add support for NIOS Development Kit DK1S10
- - Add status LED support for NIOS systems
- - Add dual 7-segment LED support for Altera NIOS DevKits
-
-* Patch by Ronen Shitrit, 10 Dec 2003:
- Add support for the Marvell DB64360 / DB64460 development boards
-
-* Patch by Detlev Zundel, 10 Dec 2003:
- fix dependency problem in examples/Makefile
-
-* Patch by Denis Peter, 8 Dec 2003
- - add support for the PATI board (MPC555)
- - add SPI support for the MPC5xx
-
-* Patch by Anders Larsen, 08 Dec 2003:
- add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
- to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
- cleanup some redundand #defines
-
-* Patch by André Schwarz, 8 Dec 2003:
- fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
- - TX and RX deskriptors must be quad-word aligned
- - does not work with only one TX deskriptor
- - standard reset method does not work
-
-* Patch by Masami Komiya, 08 Dec 2003:
- add RTL8139 ethernet driver
-
-* Patches by Ed Okerson, 07 Dec 2003:
- - fix ethernet for the AU1x00 processors in little-endian mode.
- - extend memsetup.S for the AU1x00 processors in BE and LE modes
-
-* Minor code cleanup (coding style)
-
-* Patch by Reinhard Meyer, 30 Dec 2003:
- - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
- - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
- - turned debug print of PHY registers into a function (called in two places)
- - added support for EMK MPC5200 based modules
-
-* Fix MPC8xx PLPRCR_MFD_SHIFT typo
-
-* Add support for TQM866M modules
-
-* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
-
-* Fix a few compiler warnings
-
-* Patch by Reinhard Meyer, 28 Dec 2003:
- Add initial support for TOP5200 board
-
-* Make CPU clock on ICA-IP board controllable by a "cpuclk"
- environment variable which can set to "100", "133", or "150". The
- CPU clock will be configured accordingly upon next reboot. Other
- values are ignored. In case of an invalid or undefined "cpuclk"
- value, the compile-time default CPU clock speed will be used.
-
-* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
- window that is used to access the UART registers by the Linux driver)
-
-* Patch by Reinhard Meyer, 20 Dec 2003:
- Fix clock calculation for the MPC5200 for higher clock frequencies
- (above 2**32 / 10 = 429.5 MHz).
-
-* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
-
-* Fix IceCube CLKIN configuration (it's 33.000000MHz)
-
-* Add new configuration for IceCube board with DDR memory
-
-* Update TRAB memory configurations
-
-* Add JFFS2 support for INCA-IP board
-
-* Patch by Bill Hargen, 09 Dec 2003:
- - BUBINGA405EP: changed flash driver to protect top sector containing
- first instruction.
- - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
- - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
- - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
- - 405EP: added/fixed support for "reginfo" command.
- - 4xx: removed spurious MII error messages on "mii info" command.
-
-* Patch by Bernhard Kuhn, 28 Nov 2003:
- add support for ColdFire CPU
- add support for Motorola M5272C3 and M5282EVB boards
-
-* Patch by Pierre Aubert, 24 Nov 2003:
- - add a return value for the fpga command
- - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
- is defined. If ide_preinit fails, ide_init is aborted.
- - fix an endianess problem in fat.h
-
-* Patch by Wolter Kamphuis, 05 Dec 2003:
- Add support for SNMC's QS850/QS823/QS860T boards
-
-* Patch by Yuli Barcohen, 3 Dec 2003:
- "revive" U-Boot support for old Motorola MPC860ADS board
-
-* Patch by Cam(ilo?), 03 Dec 2003:
- make examples build even with broken Montavista objcopy
-
-* Patch by Pavel Bartusek, 27 Nov 2003:
- fix conversion problem with "bootretry" evironment variable
-
-* Patch by Andre Schwarz, 24 Nov 2003:
- add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
-
-* Patch by Pavel Bartusek, 21 Nov 2003:
- set ZMII bridge speed on 440
-
-* Patch by Anders Larsen, 17 Nov 2003:
- Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
-
-* Patches by David Müller, 14 Nov 2003:
- - board/mpl/common/common_util.c
- * implement support for BZIP2 compressed images
- * various cleanups (printf -> puts, ...)
- - board/mpl/common/flash.c
- * report correct errors to upper layers
- * check the erase fail and VPP low bits in status reg
- - board/mpl/vcma9/cmd_vcma9.c
- - board/mpl/vcma9/flash.c
- * various cleanups (printf -> puts, ...)
- - common/cmd_usb.c
- * fix typo in comment
- - cpu/arm920t/usb_ohci.c
- * support for S3C2410 is missing in #if line
- - drivers/cs8900.c
- * reinit some registers in case of error (cable missing, ...)
- - fs/fat/fat.c
- * support for USB/MMC devices is missing in #if line
- - include/configs/MIP405.h
- - include/configs/PIP405.h
- * enable BZIP2 support
- * enlarge malloc space to 1MiB because of BZIP2 support
- - include/configs/VCMA9.h
- * enable BZIP2 support
- * enlarge malloc space to 1MiB because of BZIP2 support
- * enable USB support
- - lib_arm/armlinux.c
- * change calling convention of ARM Linux kernel as
- described on http://www.arm.linux.org.uk/developer/booting.php
-
-* Patch by Thomas Lange, 14 Nov 2003:
- Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
- support all these AMD boards.
-
-* Patch by Thomas Lange, 14 Nov 2003:
- Workaround for mips au1x00 physical memory accesses (the au1x00
- uses a 36 bit bus internally and cannot access physical memory
- directly. Use the uncached SDRAM address instead of the physical
- one.)
-
-* Patch by Xue Ligong (Joe), 13 Nov 2003:
- add Realtek 8019 ethernet driver
-
-* Patch by Yuli Barcohen, 13 Nov 2003:
- MPC826xADS/PQ2FADS cleanup
-
-* Patch by Anders Larsen, 12 Nov 2003:
- Update README to mark the PORTIO commands non-standard
-
-* Patch by Nicolas Lacressonnière, 12 Nov 2003:
- update for for Atmel AT91RM9200DK development kit:
- - support for environment variables in DataFlash
- - Atmel DataFlash AT45DB1282 support
-
-* Patch by Jeff Carr, 11 Nov 2003:
- add support for new version of 8270 processors
-
-* Patches by George G. Davis, 05 Nov 2003:
- - only pass the ARM linux initrd tag to the kernel when an initrd
- is actually present
- - update omap1510inn configuration file
-
-* Patches by Stephan Linz, 3 Nov 2003:
- - more endianess fixes for LAN91C111 driver
- - CFG_HZ configuration patch for NIOS Cyclone board
-
-* Patch by Stephan Linz, 28 Oct 2003:
- fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
-
-* Patch by Steven Scholz, 20 Oct 2003:
- - make "mii info <addr>" show infor for PHY at "addr" only
- - Endian fix for miiphy_info()
-
-* Patch by Gleb Natapov, 19 Sep 2003:
- Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
-
-* Patch by Anders Larsen, 17 Sep 2003:
- Bring ARM memory layout in sync with the documentation:
- stack and malloc-heap are now located _below_ the U-Boot code
-
-* Accelerate booting on TRAB board: read and check autoupdate image
- headers first instead of always reading the whole images.
-
-* Fix type in MPC5XXX code (pointed out by Victor Wren)
-
-* Enabled password check on RMU board
-
-* Fix configuration problem with IceCube in LOWBOOT configuration:
- envrionment got embedded, corrupting the image layout.
-
-* Fix NEC display names (it's 6440 [for 640x480], not 6640).
-
-* Added BMS2003 board
- add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
-
-* Fix flash driver for TRAB board (must use Unlock Bypass Reset
- command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
- and CPLD
-
-* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
- recent tools
-
-* Add checksum verification to 'imls' command
-
-* Add bd_info fields needed for 4xx Linux I2C driver
-
-* Patch by Martin Krause, 4 Nov. 2003:
- Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
-
-* Print used network interface when CONFIG_NET_MULTI is set
-
-* Patch by Bernhard Kuhn, 28 Oct 2003:
- Add low boot support for MPC5200
-
-* Fix problem with dual PCMCIA support (NSCU)
-
-* Fix MPC5200 I2C initialization function
-
-======================================================================
-Changes for U-Boot 1.0.0:
-======================================================================
-
-* Fix parameter passing to standalone images with bootm command
-
-* Patch by Kyle Harris, 30 Oct 2003:
- Fix build errors for ixdp425 board
-
-* Patch by David M. Horn, 29 Oct 2003:
- Fixes to build under CYGWIN
-
-* Get IceCube MGT5100 working (again)
-
-* Fix problems in memory test on some boards (which was not
- non-destructive as intended)
-
-* Patch by Gary Jennejohn, 28 Oct 2003:
- Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
- to prevent stack overflow on ARM systems
-
-* Patch by Stephan Linz, 28 Oct 2003:
- fix init sequence error for NIOS port
-
-* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
-
-* Add CONFIG_VERSION_VARIABLE to TRAB configuration
-
-* Patch by Xiao Xianghua, 23 Oct 2003:
- small patch for mpc85xx
-
-* Fix small problem in MPC5200 I2C driver
-
-* Fix FCC3 support on ATC board
-
-* Correct header printing for multi-image files in do_bootm()
-
-* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
-
-* Fix PCI problems on PPChameleon board
-
-* Patch by Steven Scholz, 18 Oct 2003:
- Fix AT91RM9200 ethernet driver
-
-* Patch by Nye Liu, 17 Oct 2003:
- Fix typo in include/mpc8xx.h
-
-* Patch by Richard Woodruff, 16 Oct 03:
- Fixes for cpu/arm925/interrupt.c
- - Initialize timestamp & lastdec vars.
- - fix timestamp overflows.
- - fix lastdec overflow.
- - smarter normalization to allow udelay() below 1ms to work.
-
-* Patch by Scott McNutt, 16 Oct
- add networking support for the Altera Nios Development Kit,
- Cyclone Edition (DK-1C20)
-
-* Patch by Jon Diekema, 14 Oct 2003:
- add hint about doc/README.silent to README file
-
-* Add CompactFlash support for NSCU
-
-* Fix PCI problems on PPChameleonEVB
-
-* TRAB auto-update: Base decision if we have to strip the image
- header on image type as encoded in the header
- (include image type patch by Martin Krause, 17 Oct 2003)
-
-* Patches by Xianghua Xiao, 15 Oct 2003:
-
- - Added Motorola CPU 8540/8560 support (cpu/85xx)
- - Added Motorola MPC8540ADS board support (board/mpc8540ads)
- - Added Motorola MPC8560ADS board support (board/mpc8560ads)
-
-* Fix flash timings on TRAB board
-
-* Make sure HUSH is initialized for running auto-update scripts
-
-* Make 5200 reset command _really_ reset the board, without running
- any other code after it
-
-* Fix errors with flash erase when range spans across banks
- that are mapped in reverse order
-
-* Fix flash mapping and display on P3G4 board
-
-* Patch by Kyle Harris, 15 Jul 2003:
- - add support for Intel IXP425 CPU
- - add support for IXDP425 eval board
-
-* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
- for more information
-
-* Patch by Steven Scholz, 10 Oct 2003
- - Add support for Altera FPGA ACEX1K
-
-* Patches by Thomas Lange, 09 Oct 2003:
- - fix cmd_ide.c for non ppc boards (read/write functions did not
- add ATA base address)
- - fix for shannon board
- - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
- - Endian swap ATA identity for all big endian CPUs, not just PPC
- - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
- args to linux
- - add support for dbau1x00 board (MIPS32)
-
-* Patch by Sangmoon Kim, 07 Oct 2003:
- add support for debris board
-
-* Patch by Martin Krause, 09 Oct 2003:
- Fixes for TRAB board
- - /board/trab/rs485.c: correct baudrate
- - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
- udelay(); fix some timing problems with adc controller
- - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
- modify commands: touch and buzzer
-
-* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
- (quick & dirty workaround for rogue pointer problem in get_vfatname());
- Use direct function calls for auto_update instead of hush commands
-
-* Patch by Scott McNutt, 04 Oct 2003:
- - add support for Altera Nios-32 CPU
- - add support for Nios Cyclone Development Kit (DK-1C20)
-
-* Patch by Steven Scholz, 29 Sep 2003:
- - A second parameter for bootm overwrites the load address for
- "Standalone Application" images.
- - bootm sets environment variable "filesize" to the resulting
- (uncompressed) data length for "Standalone Application" images
- when autostart is set to "no". Now you can do something like
- if bootm $fpgadata $some_free_ram ; then
- fpga load 0 $some_free_ram $filesize
- fi
-
-* Patch by Denis Peter, 25 Sept 2003:
- add support for the MIP405 Rev. C board
-
-* Patch by Yuli Barcohen, 25 Sep 2003:
- add support for Zephyr Engineering ZPC.1900 board
-
-* Patch by Anders Larsen, 23 Sep 2003:
- add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
- implemented for the x86 architecture)
-
-* Patch by Sangmoon Kim, 23 Sep 2003:
- fix pll_pci_to_mem_multiplier table for MPC8245
-
-* Patch by Anders Larsen, 22 Sep 2003:
- enable timed autoboot on PXA
-
-* Patch by David Müller, 22 Sep 2003:
- - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
- returns correct libgcc file path
- - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
- time on s3c24x0 systems
-
-* Patch by Jon Diekema, 19 Sep 2003:
- - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
- link state to the fault LED.
- - In NetLoop, make the Fault LED reflect the link status. The link
- status gets updated on entry, and on timeouts.
-
-* Patch by Anders Larsen, 18 Sep 2003:
- allow mkimage to build and run on Cygwin-hosted systems
-
-* Patch by Frank Müller, 18 Sep 2003:
- use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
- cpu/mpc8xx/fec.c
-
-* Patch by Pantelis Antoniou, 16 Sep 2003:
- add tool to compute fileds in the PLPRCR register for MPC86x
-
-* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
-
-* Fix build problems under FreeBSD
-
-* Add generic filesystem image type
-
-* Make fatload set filesize environment variable
-
-* enable basic / medium / high-end configurations for PPChameleonEVB
- board; fix NAND code
-
-* enable TFTP client code to specify to the server the desired
- timeout value (see RFC-2349)
-
-* Improve SDRAM setup for TRAB board
-
-* Suppress all output with splashscreen configured only if "splashimage"
- is set
-
-* Fix problems with I2C support for mpc5200
-
-* Adapt TRAB configuration and auto_update to new memory layout
-
-* Add configuration for wtk board
-
-* Add support for the Sharp LQ065T9DR51U LCD display
-
-* Patch by Rune Torgersen, 17 Sep 2003:
- - Fixes for MPC8266 default config
- - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
-
-* Patches by Jon Diekema, 17 Sep 2003:
- - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
- env_common.c)
- - sbc8260 tweaks
- - adjust "help" output
-
-* Patches by Anders Larsen, 17 Sep 2003:
- - fix spelling errors
- - set GD_FLG_DEVINIT flag only after device function pointers
- are valid
- - Allow CFG_ALT_MEMTEST on systems where address zero isn't
- writeable
- - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
- - trigger watchdog while waiting in serial driver
-
-* Add auto-update code for TRAB board using USB memory sticks,
- support new configuration with more memory
-
-* disable MPC5200 bus pipelining as workaround for bus contention
-
-* Modify XLB arbiter priorities on MPC5200 so all devices use same
- priority; configure critical interrupts to be handled like external
- interrupts
-
-* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
- go back to 66 MHz for stability
-
-* Patches by Jon Diekema, 15 Sep 2003:
- - add description for missing CFG_CMD_* entries in the README file
- - sacsng tweaks
-
-* Patch by Gleb Natapov, 14 Sep 2003:
- enable watchdog support for all MPC824x boards that have a watchdog
-
-* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
- "Non-octet Aligned Frame" errors we see at 100 Mbps
-
-* Patch by Sharad Gupta, 14 Sep 2003:
- fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
-
-* Patch by llandre, 11 Sep 2003:
- update configuration for PPChameleonEVB board
-
-* Patch by David Müller, 13 Sep 2003:
- various changes to VCMA9 board specific files
-
-* Add I2C support for MGT5100 / MPC5200
-
-* Patch by Rune Torgersen, 11 Sep 2003:
- Changed default memory option on MPC8266ADS to NOT be Page Based
- Interleave, since this doesn't work very well with the standard
- 16MB DIMM
-
-* Patch by George G. Davis, 12 Sep 2003:
- fix Makefile settings for sk98 driver
-
-* Patch by Stefan Roese, 12 Sep 2003:
- - new boards added: DP405, HUB405, PLU405, VOH405
- - some esd boards updated
- - cpu/ppc4xx/sdram.c: disable memory controller before setting
- first values
- - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
-
-* Patch by Martin Krause, 11 Sep 2003:
- add burn-in tests for TRAB board
-
-* Enable instruction cache on MPC5200 board
-
-* Patch by Denis Peter, 11 Sep 2003:
- - fix USB data pointer assignment for bulk only transfer.
- - prevent to display erased directories in FAT filesystem.
-
-* Change output format for NAND flash - make it look like for other
- memory, too
-
-======================================================================
-Changes for U-Boot 0.4.8:
-======================================================================
-
-* Add I2C and RTC support for RMU board
-
-* Patches by Denis Peter, 9 Sep 2003:
- add FAT support for IDE, SCSI and USB
-
-* Patches by Gleb Natapov, 2 Sep 2003:
- - cleanup of POST code for unsupported architectures
- - MPC824x locks way0 of data cache for use as initial RAM;
- this patch unlocks it after relocation to RAM and invalidates
- the locked entries.
-
-* Patch by Gleb Natapov, 30 Aug 2003:
- new I2C driver for mpc107 bridge. Now works from flash.
-
-* Patch by Dave Ellis, 11 Aug 2003:
- - JFFS2: fix typo in common/cmd_jffs2.c
- - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
- - JFFS2: remove node version 0 warning
- - JFFS2: accept JFFS2 PADDING nodes
- - SXNI855T: add AM29LV800 support
- - SXNI855T: move environment from EEPROM to flash
- - SXNI855T: boot from JFFS2 in NOR or NAND flash
-
-* Patch by Bill Hargen, 11 Aug 2003:
- fixes for I2C on MPC8240
- - fix i2c_write routine
- - fix iprobe command
- - eliminates use of global variables, plus dead code, cleanup.
-
-* Add support for USB Mass Storage Devices (BBB)
- (tested with USB memory sticks only)
-
-* Avoid flicker on TRAB's VFD
-
-* Add support for SK98xx driver
-
-* Add PCI support for SL8245 board
-
-* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
- or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
- Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
-
-* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
- to allow for more accurate baudrate settings
- (error now 0.7% at 115 kbps, instead of 3.5% before)
-
-* Patch by Andreas Mohr, 4 Sep 2003:
- Fix a lot of spelling errors
-
-* Add support for PPChameleon Eval Board
-
-* Add support for P3G4 board
-
-* Fix problem with MGT5100 FEC driver: add "early" MAC address
- initialization
-
-* Patch by Yuli Barcohen, 7 Aug 2003:
- check BCSR to detect if the board is configured in PCI mode
-
-======================================================================
-Changes for U-Boot 0.4.7:
-======================================================================
-
-* Patch by Raghu Krishnaprasad, 7 Aug 2003:
- add support for Adder II MPC852T module
-
-* Patch by George G. Davis, 19 Aug 2003:
- fix TI Innovator/OMAP1510 pin configs
-
-* Patches by Kshitij, 18 Aug 2003
- - add support for arm926ejs cpu core
- - add support for TI OMAP 1610 Innovator Board
-
-* Patch by Yuli Barcohen, 14 Aug 2003:
- add support for bzip2 uncompression
-
-* Add GCC library to examples/Makefile so GCC utility functions will
- be resolved, too
-
-* Add I2C and RTC support for RMU board using software I2C driver
- (because of better response to iprobe command); fix problem with
- "reset" command
-
-* Patch by Matthias Fuchs, 28 Aug 2003:
- Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
- CONFIG_BOOTP_MAKS (see README).
-
-* Fix ICU862 environment problem
-
-* Fix RAM size detection for RMU board
-
-* Implement "reset" for MGT5100/MPC5200 systems
-
-======================================================================
-Changes for U-Boot 0.4.6:
-======================================================================
-
-* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
- allow selection of clock frequency as "make" target
-
-* Implement memory autosizing code for IceCube boards
-
-* Configure network port on INCA-IP for autonegotiation
-
-* Fix overflow problem in network timeout code
-
-* Patch by Richard Woodruff, 8 Aug 2003:
- Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
-
-======================================================================
-Changes for U-Boot 0.4.5:
-======================================================================
-
-* Update for TQM board defaults:
- disable clocks_in_mhz, enable boot count limit
-
-* Removed tools/gdb from "make all" target. Added make target "gdbtools"
- in toplevel directory instead. Removed astest.c from tools/gdb because
- it is no longer relevant.
-
-* Fix PCI support for MPC5200 / IceCube Board
-
-* Map ISP1362 USB OTG controller for NSCU board
-
-* Patch by Brad Parker, 02 Aug 2003:
- fix sc520_cdp problems
-
-* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
-
-* Allow erase command to cross flash bank boundaries
-
-* Patch by Scott McNutt, 21 Jul 2003:
- Add support for LynuxWorks Kernel Downloadable Images (KDIs).
- Both LynxOS and BlueCat linux KDIs are supported.
-
-* Patch by Richard Woodruff, 25 Jul 2003:
- use more reliable reset for OMAP/925T
-
-* Patch by Nye Liu, 25 Jul 2003:
- fix typo in mpc8xx.h
-
-* Patch by Richard Woodruff, 24 Jul 2003:
- Fixes for cmd_nand.c:
- - Fixed null dereferece which could result in incorrect ECC values.
- - Added support for devices with no Ready/Busy signal hooked up.
- - Added OMAP1510 read/write protect handling.
- - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
- for non-JFFS2.
- - Switched default ECC to be JFFS2.
-
-* Allow crc32 to be used at address 0x000
-
-* Provide consistent interface to standalone applications to access
- the 'global_data' structure
- Provide a doc/README.standalone more useful to users/developers.
-
-* Make IceCube MGT5100 FEC driver work
-
-* Implement new mechanism to export U-Boot's functions to standalone
- applications: instead of using (PPC-specific) system calls we now
- use a jump table; please see doc/README.standalone for details
-
-* Patch by Dave Westwood, 24 Jul 2003:
- added support for Unity OS (a proprietary OS)
-
-* Patch by Detlev Zundel, 23 Jul 2003:
- add "imls" command to print flash table of contents
-
-* Fix cold boot detection for log buffer reset
-
-* Return error for invalid length specifiers with "cp.X" etc.
-
-* Fix startup problem on MIPS
-
-* Allow for CONFIG_SPLASH_SCREEN even when no explicit
- bitmap support is configured
-
-* Patch by Bill Hargen, 18 Jul 2003:
- - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
-
-* Patch by Denis Peter, 18 Jul 2003:
- - fix memory configuration for MIP405T
- - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
-
-* Cleanup of TQM82xx configurations; use "official" board types
- to make selection easier.
-
-* Patch by Martin Krause, 17 Jul 2003:
- add delay to get I2C working with "imm" command and s3c24x0_i2c.c
-
-* Patch by Richard Woodruff, 17 July 03:
- - Fixed bug in OMAP1510 baud rate divisor settings.
-
-* Patch by Nye Liu, 16 July 2003:
- MPC860FADS fixes:
- - add MPC86xADS support (uses MPC86xADS.h)
- - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
- o PLPRCR changes
- o BRG changes (EXTAL/XTAL restricted to 10MHz)
- o don't trust gclk() software measurement by default, depend on
- CONFIG_8xx_GCLK_FREQ
- - add DRAM SIMM not installed detection
- - use more "correct" SDRAM initialization sequence
- - allow different SDRAM sizes (8xxADS has 8M)
- - default DER is 0
- - remove unused MAMR defines from FADS860T.h (all done in fads.c)
- - rename MAMR/MBMR defines to be more consistent. Should eventually
- be merged into MxMR to better reflect the PowerQUICC datasheet.
-
-* Patch by Yuli Barcohen, 16 Jul 2003:
- support new Motorola PQ2FADS-ZU evaluation board which replaced
- MPC8260ADS and MPC8266ADS
-
-======================================================================
-Changes for U-Boot 0.4.4:
-======================================================================
-
-* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
-
-* Add support for MGT5100 and MPC5200 processors
-
-* Patch by Lutz Dennig, 15 Jul 2003:
- update for R360MPI board
-
-======================================================================
-Changes for U-Boot 0.4.3:
-======================================================================
-
-* Patches by Kshitij, 04 Jul 2003
- - added support for arm925t cpu core
- - added support for TI OMAP 1510 Innovator Board
-
-* Patches by Martin Krause, 14 Jul 2003:
- - add I2C support for s3c2400 systems (trab board)
- - (re-) add "ping" to command table
-
-* Fix handling of "slow" POST routines
-
-* Patches by Yuli Barcohen, 13 Jul 2003:
- - Correct flash and JFFS2 support for MPC8260ADS
- - fix PVR values and clock generation for PowerQUICC II family
- (8270/8275/8280)
-
-* Patch by Bernhard Kuhn, 08 Jul 2003:
- - add support for M68K targets
-
-* Patch by Ken Chou, 3 Jul:
- - Fix PCI config table for A3000
- - Fix iobase for natsemi.c
- (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
-
-* Allow to enable "slow" POST routines by key press on power-on
-* Fix temperature dependend switching of LCD backlight on LWMON
-* Tweak output format for LWMON
-
-* Patch by Stefan Roese, 11 Jul 2003:
- - Fix bug in CONFIG_VERSION_VARIABLE.
- - AR405 config updated.
- - OCRTC/ORSG: bsp command added.
- - ASH405 bsp update.
-
-======================================================================
-Changes for U-Boot 0.4.2:
-======================================================================
-
-* Add support for NSCU board
-
-* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
-
-* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
- mirror bit flash on TQM8xxM modules
-
-* Patch by Kenneth Johansson, 30 Jun 2003:
- get rid of MK_CMD_ENTRY macro; update doc/README.command
-
-* Patch by Seb James, 30 Jun 2003:
- Improve documentation of I2C configuration in README
-
-* Fix problems with previous log buffer "fixes"
-
-* Fix minor help text issues
-
-* "log append" did not append a newline
-
-======================================================================
-Changes for U-Boot 0.4.1:
-======================================================================
-
-* Fix some missing commands, cleanup header files
- (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
-
-* Rewrite command lookup and help command (fix problems with bubble
- sort when sorting command name list). Minor cleanup here and there.
-
-* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
- - Allow to call sysmon function interactively
- - PIC on LWMON board needs delay after power-on
- - Add missing RSR definitions for MPC8xx
- - Improve log buffer handling: guarantee clean reset after power-on
- - Add support for EXBITGEN board (aka "genie")
- - Add support for SL8245 board
-
-* Code cleanup:
- - remove trailing white space, trailing empty lines, C++ comments, etc.
- - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
-
-* Patches by Kenneth Johansson, 25 Jun 2003:
- - major rework of command structure
- (work done mostly by Michal Cendrowski and Joakim Kristiansen)
-
-======================================================================
-Changes for U-Boot 0.4.0:
-======================================================================
-
-* Patches by Robert Schwebel, 26 Jun 2003:
- - csb226 configuration updated
- - credits for logodl port updated
- - innokom configuration updated
- - logodl tree update, still with coding style inconsistencies
- - added OCM for ppc405 warning to README
-
-* Patch by Pantelis Antoniou, 25 Jun 2003:
- update NetVia with V2 board support
-
-* Header file cleanup for ARM
-
-* Patch by Murray Jensen, 24 Jun 2003:
- - make sure to use only U-boot provided header files
- - fix problems with ".rodata.str1.4" section as used by GCC-3.x
-
-* Patch by Stefan Roese, 24 Jun 2003:
- - Update esd ASH405 board files.
- - Update esd DASA_SIM config file.
- - Add ping command to some esd boards.
-
-* Patch by Yuli Barcohen, 23 Jun 2003:
- Update for MPC8260ADS board
-
-* Patch by Murray Jensen, 23 Jun 2003:
- - cleanup of GCC 3.x compiler warnings
-
-* Patch by Rune Torgersen, 4 Jun 2003:
- add large memory support for MPC8266ADS board
-
-* Patch by Richard Woodruff, 19 June 03:
- - Enabled standard u-boot device abstraction for ARM
- - Enabled console device for ARM
- - Initilized bi_baudrate for ARM
-
-* Patch by Bill Hargen, 23 Apr 2003:
- fix byte order for 824x I2C addresses (write op)
-
-* Patch by Murray Jensen, 20 Jun 2003:
- - hymod update
- - cleanup (especially for gcc-3.x compilers)
-
-* Patch by Tom Guilliams, 20 Jun 2003:
- added CONFIG_750FX support for IBM 750FX processors
-
-* Patch by Devin Crumb, 02 Apr 2003:
- Fix clock divider rounding problem in drivers/serial.c
-
-* Patch by Richard Woodruff, 19 June 03:
- - Fixed smc91c111 driver to sync with the u-boot environment
- (driver/smc91c111.c).
- - Added eth_init error return check in NetLoop (net/net.c).
-
-* Patch by Ken Chou, 19 June 2003:
- Added support for A3000 SBC board (Artis Microsystems Inc.)
-
-* Patches by Murray Jensen, 17 Jun 2003:
- - Hymod board database mods: add "who" field and new xilinx chip types
- - provide new "init_cmd_timeout()" function so code external to
- "common/main.c" can use the "reset_cmd_timeout()" function before
- entering the main loop
- - add DTT support for adm1021 (new file dtt/adm1021.c; config
- slightly different. see include/configs/hymod.h for an example
- (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
- CFG_DTT_ADM1021 defined)
- - add new "eeprom_probe()" function which has similar args and
- behaves in a similar way to "eeprom_read()" etc.
- - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
- function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
- - gdbtools copyright update
- - ensure that set_msr() executes the "sync" and "isync" instructions
- after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
- - 8260 I/O ports fix: Open Drain should be set last when configuring
- - add SIU IRQ defines for 8260
- - allow LDSCRIPT override and OBJCFLAGS initialization: change to
- config.mk to allow board configurations to override the GNU
- linker script, selected via the LDSCRIPT, make variable, and to
- give an initial value to the OBJCFLAGS make variable
- - 8260 i2c enhancement:
- o correctly extends the timeout depending on the size of all
- queued messages for both transmit and receive
- o will not continue with receive if transmit times out
- o ensures that the error callback is done for all queued tx
- and rx messages
- o correctly detects both tx and rx timeouts, only delivers one to
- the callback, and does not overwrite an earlier error
- o logic in i2c_probe now correct
- - add "vprintf()" function so that "panic()" function can be
- technically correct
- - many Hymod board changes
-
-* Patches by Robert Schwebel, 14 Jun 2003:
- - add support for Logotronic DL datalogger board
- - cleanup serial line after kermit binary download
- - add debugX macro (debug level support)
- - update mach-types.h to latest arm.linux.org.uk master list.
-
-* Patches by David Müller, 12 Jun 2003:
- - rewrite of the S3C24X0 register definitions stuff
- - "driver" for the built-in S3C24X0 RTC
-
-* Patches by Yuli Barcohen, 12 Jun 2003:
- - Add MII support and Ethernet PHY initialization for MPC8260ADS board
- - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
- configuration word supplied by FPGA on some MPC8260ADS boards
-
-* Patch by Pantelis Antoniou, 10 Jun 2003:
- Unify status LED interface
-
-* Add support for DS12887 RTC; add RTC support for ATC board
-
-* Patch by Nicolas Lacressonniere, 11 Jun 2003:
- Modifications for Atmel AT91RM9200DK ARM920T based development kit
- - Add Atmel DataFlash support for reading and writing.
- - Add possibility to boot a Linux from DataFlash with BOOTM command.
- - Add Flash detection on Atmel AT91RM9200DK
- (between Atmel AT49BV1614 and AT49BV1614A flashes)
- - Replace old Ethernet PHY layer functions
- - Change link address
-
-* Patch by Frank Smith, 9 Jun 2003:
- use CRIT_EXCEPTION for machine check on 4xx
-
-* Patch by Detlev Zundel, 13 Jun 2003:
- added implementation of the "carinfo" command in cmd_immap.c
-
-* Fix CONFIG_NET_MULTI support in include/net.h
-
-* Patches by Kyle Harris, 13 Mar 2003:
- - Add FAT partition support
- - Add command support for FAT
- - Add command support for MMC
- ----
- - Add Intel PXA support for video
- - Add Intel PXA support for MMC
- ----
- - Enable MMC and FAT for lubbock board
- - Other misc changes for lubbock board
-
-* Patch by Robert Schwebel, April 02, 2003:
- fix for SMSC91111 driver
-
-* Patch by Vladimir Gurevich, 04 Jun 2003:
- make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
-
-* Patch by Stefan Roese, 05 Jun 2003:
- - PPC4xx: Fix bug for initial stack in data cache as pointed out by
- Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
- data cache can be used even if the chip select is in use.
- - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
- (see README for further description).
- - Changed config files of CONFIG_EEPRO100 boards to use the
- CFG_RX_ETH_BUFFER define.
-
-* Add support for RMU board
-
-* Add support for TQM862L at 100/50 MHz
-
-* Patch by Pantelis Antoniou, 02 Jun 2003:
- major reconstruction of networking code;
- add "ping" support (outgoing only!)
-
-* Patch by Denis Peter, 04 June 2003:
- add support for the MIP405T board
-
-* Patches by Udi Finkelstein, 2 June 2003:
- - Added support for custom keyboards, initialized by defining a
- board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
- - Added support for the RBC823 board.
- - cpu/mpc8xx/lcd.c now automatically calculates the
- Horizontal Pixel Count field.
-
-* Fix alignment problem in BOOTP (dhcp_leasetime option)
- [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
-
-* Patch by Mark Rakes, 14 May 2003:
- add support for Intel e1000 gig cards.
-
-* Patch by Nye Liu, 3 Jun 2003:
- fix critical typo in MAMR definition (include/mpc8xx.h)
-
-* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
-
-* Patch by Klaus Heydeck, 2 Jun 2003
- Minor changes for KUP4K configuration
-
-* Patch by Marc Singer, 29 May 2003:
- Fixed rarp boot method for IA32 and other little-endian CPUs.
-
-* Patch by Marc Singer, 28 May 2003:
- Added port I/O commands.
-
-* Patch by Matthew McClintock, 28 May 2003
- - cpu/mpc824x/start.S: fix relocation code when booting from RAM
- - minor patches for utx8245
-
-* Patch by Daniel Engström, 28 May 2003:
- x86 update
-
-* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
- add nand flash support to SXNI855T configuration
- fix/extend nand flash support:
- - fix 'nand erase' command so does not erase bad blocks
- - fix 'nand write' command so does not write to bad blocks
- - fix nand_probe() so handles no flash detected properly
- - add doc/README.nand
- - add .jffs2 and .oob options to nand read/write
- - add 'nand bad' command to list bad blocks
- - add 'clean' option to 'nand erase' to write JFFS2 clean markers
- - make NAND read/write faster
-
-* Patch by Rune Torgersen, 23 May 2003:
- Update for MPC8266ADS board
-
-* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
- instead CFG_MONITOR_LEN is now only used to determine _at_compile_
- _time_ (!) if the environment is embedded within the U-Boot image,
- or in a separate flash sector.
-
-* Cleanup CFG_DER #defines in config files (wd maintained only)
-
-* Fix data abort exception handling for arm920t CPU
-
-* Fix alignment problems with flash driver for TRAB board
-
-* Patch by Donald White, 21 May 2003:
- fix calculation of base address in pci_hose_config_device()
-
-* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
- execute "cmd2", even if "cmd1" fails. Note that this is different
- to "run var1 var2" where the contents of "var2" will NOT be
- executed when a command in "var1" fails.
-
-* Add zero-copy ramdisk support (requires corresponding kernel support!)
-
-* Patch by Kyle Harris, 20 May 2003:
- In preparation for an ixp port, rename cpu/xscale and arch-xscale
- into cpu/pxa and arch-pxa.
-
-* Patch by Stefan Roese, 23 May 2003:
- - IBM PPC405EP port added.
- - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
- UART0) is used as default U-Boot console. PPC4xx only!
- - esd ASH405 board added (PPC405EP based).
- - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
- - esd CPCI405AB board added.
- - esd PMC405 board added.
- - Update of some esd boards.
-
-* Patch by Denis Peter, 19 Mai 2003:
- add support for the MIP405-3 board
-
-* Patch by Dave Ellis, 22 May 2003:
- Fix problem with only partially cleared .bss segment
-
-* Patch by Rune Torgersen, 12 May 2003:
- get PCI to work on a MPC8266ADS board; incorporate change to
- cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
-
-* Patch by Nye Liu, 1 May 2003:
- minor patches for the FADS8xx
-
-* Patch by Thomas Schäfer, 28 Apr 2003:
- Fix SPD handling for 256 ECC DIMM on Walnut
-
-* Add support for arbitrary bitmaps for TRAB's VFD command;
- allow to pass boot bitmap addresses in environment variables;
- allow for zero boot delay
-
-* Patch by Christian Geißinger, 19 May 2002:
- On TRAB: wait until the dummy byte has been completely sent
-
-* Patch by David Updegraff, 22 Apr 2003:
- update for CrayL1 board
-
-* Patch by Pantelis Antoniou, 21 Apr 2003:
- add boot support for ARTOS (a proprietary OS)
-
-* Patch by Steven Scholz, 11 Apr 2003:
- Add support for RTC DS1338
-
-* Patch by Rod Boyce, 24 Jan 2003:
- Fix counting of extended partitions in diskboot command
-
-* Patch by Christophe Lindheimer, 20 May 2003:
- allow the use of CFG_LOADS when CFG_NO_FLASH is set
-
-* Fix SDRAM timing on Purple board
-
-* Add support for CompactFlash on ATC board
- (includes support for Intel 82365 and compatible PC Card controllers,
- and Yenta-compatible PCI-to-CardBus controllers)
-
-* Patch by Mathijs Haarman, 08 May 2003:
- Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
-
-* Fix problem with usage of "true" (undefined in current versions of bfd.h)
-
-* Add support for Promess ATC board
-
-* Patch by Keith Outwater, 28 Apr 2003:
- - Miscellaneous corrections and additions to GEN860T board specific code.
- - Added GEN860_SC variant to GEN860T.
- - Miscellaneous corrections to GEN860T documentation.
- - Correct duplicate entry in U-Boot CREDITS file.
- - Add GEN860T_SC entry in MAINTAINERS file.
- - Update CREDITS file with GEN860T_SC info.
-
-* Update Smiths Aerospace addresses in MAINTAINERS file
-
-* Fix error handling in hush's version of "run" command
-
-* LWMON extensions:
- - Splashscreen support
- - modem support
- - sysmon support
- - temperature dependend enabling of LCD
-
-* Allow booting from old "PPCBoot" disk partitions
-
-* Add support for TQM8255 Board / MPC8255 CPU
-
-======================================================================
-Changes for U-Boot 0.3.1:
-======================================================================
-
-* Make sure Block Lock Bits get cleared in R360MPI flash driver
-
-* MPC823 LCD driver: Fill color map backwards, to allow for steady
- display when Linux takes over
-
-* Patch by Erwin Rol, 27 Feb 2003:
- Add support for RTEMS (this time for real).
-
-* Add support for "bmp info" and "bmp display" commands to load
- bitmap images; this can be used (for example in a "preboot"
- command) to display a splash screen very quickly after poweron.
-
-* Add support for 133 MHz clock on INCA-IP board
-
-* Patch by Lutz Dennig, 10 Apr 2003:
- Update for R360MPI board
-
-* Add new meaning to "autostart" environment variable:
- If set to "no", a standalone image passed to the
- "bootm" command will be copied to the load address
- (and eventually uncompressed), but NOT be started.
- This can be used to load and uncompress arbitrary
- data.
-
-* Patch by Stefan Roese, 10 Apr 2003:
- Changed DHCP client to use IP address from server option field #54
- from the OFFER packet in the server option field #54 in the REQUEST
- packet. This fixes a problem using a Windows 2000 DHCP server,
- where the DHCP-server is not the TFTP-server.
-
-* Set max brightness for MN11236 displays on TRAB board
-
-* Add support for TQM862L modules
-
-======================================================================
-Changes for U-Boot 0.3.0:
-======================================================================
-
-* Patch by Arun Dharankar, 4 Apr 2003:
- Add IDMA example code (tested on 8260 only)
-
-* Add support for Purple Board (MIPS64 5Kc)
-
-* Add support for MIPS64 5Kc CPUs
-
-* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
-
-* Patch by Denis Peter, 04 Apr 2003:
- - update MIP405-4 board
-
-* Patch by Stefan Roese, 4 Apr 2003:
- - U-Boot version environment variable "ver" added
- (CONFIG_VERSION_VARIABLE).
- - Changed PPC405GPr version from A to B.
- - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
-
-* Patches by Denis Peter, 03 April 2003:
- - fix PCI IRQs on MPL boards
- - fix two more un-relocated pointer problems
-
-* Fix behaviour of "run" command:
- - print error message iv variable does not exist
- - terminate processing of arguments in case of error
-
-* Patches by Peter Figuli, 10 Mar 2003
- - Add support for BTUART on PXA platform
- - Add support for WEP EP250 (PXA) board
-
-* Fix flash problems on INCA-IP; add tool to allow bruning images to
- flash using a BDI2000
-
-* Implement fix for I2C Edge Conditions problem for all boards that
- use the bit-banging driver (common/soft_i2c.c)
-
-* Patch by Martin Winistoerfer, 23 Mar 2003
- - Add port to MPC555/556 microcontrollers
- - Add support for cmi customer board with
- Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
-
-* Patch by Rick Bronson, 28 Mar 2003:
- - fix common/cmd_nand.c
-
-* Patch by Arun Dharankar, 24 Mar 2003:
- - add threads / scheduler example code
-
-* Add patches by Robert Schwebel, 31 Mar 2003:
- - add ctrl-c support for kermit download
- - align bdinfo output on ARM
- - csb226 board: bring in sync with innokom/memsetup.S
- - csb226 board: fix MDREFR handling
- - misc doc fixes / extensions
- - innokom board: cleanup, MDREFR fix in memsetup.S, config update
- - add BOOT_PROGRESS to armlinux.c
-
-* Add CPU ID, version, and clock speed for INCA-IP
-
-* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
- - fix SRAM and SDRAM memory sizing
- - add status LED support
- - add MAC address for second (SCC1) ethernet port
-
-* Update default environment for TQM8260 board
-
-* Patch by Rick Bronson, 16 Mar 2003:
- - Add NAND flash support for reading, writing, and erasing NAND
- flash (certain forms of which are called SmartMedia).
- - Add support for Atmel AT91RM9200DK ARM920T based development kit.
-
-* Patches by Robert Schwebel, 19 Mar 2003:
- - use arm-linux-gcc as default compiler for ARM
- - fix i2c fixup code
- - fix missing baudrate setting
- - added $loadaddr / CFG_LOAD_ADDR support to loadb
- - moved "ignoring trailing characters" _before_ u-boot wants to
- print out diagnostics messages; removes bogus characters at the
- end of transmission
-
-* Patch by John Zhan, 18 Mar 2003:
- Add support for SinoVee Microsystems SC8xx boards
-
-* Patch by Rolf Offermanns, 21 Mar 2003:
- ported the dnp1110 related changes from the current armboot cvs to
- current u-boot cvs. smc91111 does not work. problem marked in
- smc91111.c, grep for "FIXME".
-
-* Patch by Brian Auld, 25 Mar 2003:
- Add support for STM flash chips on ebony board
-
-* Add PCI support for MPC8250 Boards (PM825 module)
-
-* Patch by Stefan Roese, 25 Mar 2003:
- - PCI405 update.
-
-* Patch by Stefan Roese, 20 Mar 2003:
- - CPCI4052 update (support for revision 3).
- - Set edge conditioning circuitry on PPC405GPr for compatibility
- to existing PPC405GP designs.
- - Clip udiv to 5 bits on PPC405 (serial.c).
-
-* Extend INCAIP board support:
- - add automatic RAM size detection
- - add "bdinfo" command
- - pass flash address and size to Linux kernel
- - switch to 150 MHz clock
-
-* Avoid flicker on the TRAB's VFD by synchronizing the enable with
- the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
- boards, version 153 for Rev. 200 boards).
-
-* Patch by Vladimir Gurevich, 12 Mar 2003:
- Fix relocation problem of statically initialized string pointers
- in common/cmd_pci.c
-
-* Patch by Kai-Uwe Blöm, 12 Mar 2003:
- Cleanup & bug fixes for JFFS2 code:
- - the memory mangement was broken. It caused havoc on malloc by
- writing beyond the block boundaries.
- - the length calculation for files was wrong, sometimes resulting
- in short file reads.
- - data copying now optionally takes fragment version numbers into
- account, to avoid copying from older data.
- See doc/README.JFFS2 for details.
-
-* Patch by Josef Wagner, 12 Mar 2003:
- - 16/32 MB and 50/80 MHz support with auto-detection for IP860
- - ETH05 and BEDBUG support for CU824
- - added support for MicroSys CPC45
- - new BOOTROM/FLASH0 and DOC base for PM826
-
-* Patch by Robert Schwebel, 12 Mar 2003:
- Fix the chpart command on innokom board
-
-* Name cleanup:
- mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
- s/PPCBoot/U-Boot/ in some files
- s/pImage/uImage/ in some files
-
-* Patch by Detlev Zundel, 15 Jan 2003:
- Fix '' command line quoting
-
-* Patch by The LEOX team, 19 Jan 2003:
- - add support for the ELPT860 board
- - add support for Dallas ds164x RTC
-
-* Patches by David Müller, 31 Jan 2003:
- - minimal setup for CardBus bridges
- - add EEPROM read/write support in the CS8900 driver
- - add support for the builtin I2C controller in the Samsung s3c24x0 chips
- - add support for MPL's VCMA9 (Samsung s3c2410 based) board
-
-* Patch by Steven Scholz, 04 Feb 2003:
- add support for RTC DS1307
-
-* Patch by Reinhard Meyer, 5 Feb 2003:
- fix PLPRCR/SCCR init sequence on 8xx to allow for
- changes of EBDF by software
-
-* Patch by Vladimir Gurevich, 07 Feb 2003:
- "API-compatibility patch" for 4xx I2C driver
-
-* TRAB fixes / extensions:
- - Restore VFD brightness as saved in environment
- - add support for Fujitsu flashes
- - make sure both buzzers are turned off (drive low level)
-
-* Patches by Robert Schwebel, 06 Mar 2003:
- - fix bug in BOOTP code (must use NetCopyIP)
- - update of CSB226 port
- - clear BSS segment on XScale
- - added support for i2c_init_board() function
- - update to the Innokom plattform
-
-* Extend support for redundand environments for configurations where
- environment size < sector size
-
-* Patch by Rune Torgersen, 13 Feb 2003:
- Add support for Motorola MPC8266ADS board
-
-* Patch by Kyle Harris, 19 Feb 2003:
- patches for the Intel lubbock board:
- memsetup.S - general cleanup (based on Robert's csb226 code)
- flash.c - overhaul, actually works now
- lubbock.c - fix init funcs to return proper value
-
-* Patch by Kenneth Johansson, 26 Feb 2003:
- - Fixed off by one in RFTA calculation.
- - No need to abort when LDF is lower than we can program it's only
- minimum timing so clamp it to what we can do.
- - Takes function pointer to function for reading the spd_nvram. Usefull
- for faking data or hardcode a module without the nvram.
- - fix other user for above change
- - fix some comments.
-
-* Patches by Brian Waite, 26 Feb 2003:
- - fix port for evb64260 board
- - fix PCI for evb64260 board
- - fix PCI scan
-
-* Patch by Reinhard Meyer, 1 Mar 2003:
- Add support for EMK TOP860 Module
-
-* Patch by Yuli Barcohen, 02 Mar 2003:
- Add SPD EEPROM support for MPC8260ADS board
-
-* Patch by Robert Schwebel, 21 Jan 2003:
- - Add support for Innokom board
- - Don't complain if "install" fails
- - README cleanup (remove duplicated lines)
- - Update PXA header files
-
-* Add documentation for existing POST code (doc/README.POST)
-
-* Patch by Laudney Ren, 15 Jan 2003:
- Fix handling of redundand environment in "tools/envcrc.c"
-
-* Patch by Detlev Zundel, 28 Feb 2003:
- Add bedbug support for 824x systems
-
-* Add support for 16 MB flash configuration of TRAB board
-
-* Patch by Erwin Rol, 27 Feb 2003:
- Add support for RTEMS
-
-* Add image information to README
-
-* Patch by Stefan Roese, 18 Feb 2003:
- CPCIISER4 configuration updated.
-
-* Patch by Stefan Roese, 17 Feb 2003:
- Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
-
-* Patch by Stefan Roese, 13 Feb 2003:
- Add "pcidelay" environment variable (in ms, enabled via
- CONFIG_PCI_BOOTDELAY).
- PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
- RST# to respond to configuration cycles (33MHz -> 1s).
-
-* Fix dual PCMCIA slot support (when running with just one
- slot populated)
-
-* Add VFD type detection to trab board
-
-* extend drivers/cs8900.c driver to synchronize ethaddr environment
- variable with value in the EEPROM
-
-* Patch by Stefan Roese, 10 Feb 2003:
- Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
-
-* Add support for MIPS32 4Kc CPUs
-
-* Add support for INCA-IP Board
-
-======================================================================
-Changes for U-Boot 0.2.2:
-======================================================================
-
-* Add dual ethernet support on PM826
-
-* Add support for LXT971 PHY on PM826
-
-* Patch by Tord Andersson, 16 Jan 2003:
- Fix flash sector count for TQM8xxL
-
-* Fix I2C EEPROM problem on ICU862 board (would only write the first
- 16 bytes out of each 32 byte block)
-
-======================================================================
-Changes for U-Boot 0.2.1:
-======================================================================
-
-* Add support for V37 board
- (patch by Jón Benediktsson, 11 Dec 2002)
-
-* Update baudrate in bd_info when it gets changed
-
-* Add watchdog trigger points while waiting for serial port
- (so far only 8xx -- needed on LWMON with 100ms watchdog)
-
-* Improve command line tool to access the U-Boot's environment
- (figuration of the utility, using a config file)
-
-* Add single quote support for (old) command line parser
-
-* Switch LWMON board default config from FRAM to EEPROM;
- in POST, EEPROM shows up on 8 addresses
-
-======================================================================
-Changes for U-Boot 0.2.0:
-======================================================================
-
-* Use 1-byte-read instead of -write for iprobe() function
- Add i2c commands to PM826 config
-
-* extend I2C POST code: check for list on known addresses
-
-* Improve log buffer code; use "loglevel" to decide which messages
- to log on the console, too (like in Linux); get rid of "logstart"
-
-* Add command line tool to access the U-Boot's environment
- (board-specific for TRAB now, to be fixed later)
-
-* Patch by Hans-Joerg Frieden, 06 Dec 2002
- Fix misc problems with AmigaOne support
-
-* Patch by Chris Hallinan, 3 Dec 2002:
- minor cleanup to the MPC8245 EPIC driver
-
-* Patch by Pierre Aubert , 28 Nov 2002
- Add support for external (SIU) interrupts on MPC8xx
-
-* Patch by Pierre Aubert , 28 Nov 2002
- Fix nested syscalls bug in standalone applications
-
-* Patch by David Müller, 27 Nov 2002:
- fix output of "pciinfo" command for CardBus bridge devices.
-
-* Fix bug in TQM8260 board detection - boards got stuck when board ID
- was not readable
-
-* Add LED indication for IDE activity on KUP4K board
-
-* Fix startup problems with VFD display on TRAB
-
-* Patch by Pierre Aubert, 20 Nov 2002
- Add driver for Epson SED13806 graphic controller.
- Add support for BMP logos in cfb_console driver.
-
-* Added support for both PCMCIA slots (at the same time!) on MPC8xx
-
-* Patch by Rod Boyce, 21 Nov 2002:
- fix PCMCIA on MBX8xx board
-
-* Patch by Pierre Aubert , 21 Nov 2002
- Add CFG_CPM_POST_WORD_ADDR to make the offset of the
- bootmode word in DPRAM configurable
-
-* Patch by Daniel Engström, 18 Nov 2002:
- Fixes for x86 port (mostly strings issues)
-
-* Patch by Ken Chou, 18 Nov 2002:
- Fix for natsemi NIC cards (DP83815)
-
-* Patch by Pierre Aubert, 19 Nov 2002:
- fix a bug for the MII configuration, and some warnings
-
-* Patch by Thomas Frieden, 13 Nov 2002:
- Add code for AmigaOne board
- (preliminary merge to U-Boot, still WIP)
-
-* Patch by Jon Diekema, 12 Nov 2002:
- - Adding URL for IEEE OUI lookup
- - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
- being defined.
- - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
- root-on-nfs macros are designed to switch how the default boot
- method gets defined.
-
-* Patch by Daniel Engström, 13 Nov 2002:
- Add support for i386 architecture and AMD SC520 board
-
-* Patch by Pierre Aubert, 12 Nov 2002:
- Add support for DOS filesystem and booting from DOS floppy disk
-
-* Patch by Jim Sandoz, 07 Nov 2002:
- Increase number of network RX buffers (PKTBUFSRX in
- "include/net.h") for EEPRO100 based boards (especially SP8240)
- which showed "Receiver is not ready" errors when U-Boot was
- processing the receive buffers slower than the network controller
- was filling them.
-
-* Patch by Andreas Oberritter, 09 Nov 2002:
- Change behaviour of NetLoop(): return -1 for errors, filesize
- otherwise; return code 0 is valid an means no file loaded - in this
- case the environment still gets updated!
-
-* Patches by Jon Diekema, 9 Nov 2002:
- - improve ADC/DAC clocking on the SACSng board to align
- the failing edges of LRCLK and SCLK
- - sbc8260 configuration tweaks
- - add status LED support for 82xx systems
- - wire sspi/sspo commands into command handler; improved error
- handlering
- - add timestamp support and alternate memory test to the
- SACSng configuration
-
-* Patch by Vince Husovsky, 7 Nov 2002:
- Add "-n" to linker options to get rid of "Not enough room for
- program headers" problem
-
-* Patch by David Müller, 05 Nov 2002
- Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
- so we can use an already existing name
-
-* Patch by Pierre Aubert, 05 Nov 2002
- Hardware relatied improvments in FDC boot code
-
-* Patch by Holger Schurig, 5 Nov 2002:
- Make the PXA really change it's frequency
-
-* Patch by Pierre Aubert, 05 Nov 2002
- Add support for slave serial Spartan 2 FPGAs
-
-* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
- drivers
-
-* Add support for log buffer which can be passed to Linux kernel's
- syslog mechanism; used especially for POST results.
-
-* Patch by Klaus Heydeck, 31 Oct 2002:
- Add initial support for kup4k board
-
-* Patch by Robert Schwebel, 04 Nov 2002:
- - use watchdog to reset PXA250 systems
- - added progress callbacks to (some of the) ARM code
- - update for Cogent CSB226 board
-
-* Add support for FPS860 board
-
-* Patch by Guillaume Alexandre,, 04 Nov 2002:
- Improve PCI access on 32-bits Compact PCI bus
-
-* Fix mdelay() on TRAB - this was still the debugging version with
- seconds instead of ms.
-
-* Patch by Robert Schwebel, 1 Nov 2002:
- XScale related cleanup (affects all ARM boards)
-
-* Cleanup of names and README.
-
-======================================================================
-Notes for U-Boot 0.1.0:
-======================================================================
-
-This is the initial version of "Das U-Boot", the Universal Boot Loader.
-
-It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
-For information about the history of the project please see the
-PPCBoot project page at http://sourceforge.net/projects/ppcboot
-
-======================================================================
+ Initial support for MPC8641 HPCN board.
projects / karo-tx-uboot.git / blobdiff