+commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 6 15:58:09 2007 +0100
+
+ [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
+
+ This patch fixes a problem with an incorrect setup for the refresh
+ timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f16c1da9577f06c5fc08651a4065537407de4635
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 6 15:56:13 2007 +0100
+
+ [PATCH] Update ALPR board files
+
+ This update brings the ALPR board support to the newest version.
+ It also fixes a problem with the NAND driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cd1d937f90250a32988c37b2b4af8364d25de8ed
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 5 11:46:05 2007 +0100
+
+ [PATCH] nand: Fix problem with oobsize calculation
+
+ Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
+
+ The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
+ returns a 0x15. In the code fragment below bits [1:0] determine the
+ page size, it is ANDed via "(extid & 0x3)" then shifted out. The
+ next field is also ANDed with 0x3. However this is a one bit field
+ as defined in the Hynix and Samsung parts in the 4th ID byte that
+ determins the oobsize, not a two bit field. It works on Samsung as
+ bits[3:2] are 01. However for the Hynix there is a 11 in these two
+ bits, so the oob size gets messed up.
+
+ I checked the correct linux code and the suggested fix from Brian is
+ also available in the linux nand mtd driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 5 10:40:36 2007 +0100
+
+ [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
+
+ This fix will make the MAL burst disabling patch for the Linux
+ EMAC driver obsolete.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 023889838282b6237b401664f22dd22dfba2c066
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 5 10:38:05 2007 +0100
+
+ [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
+
+ This code will optimize the DDR2 controller setup on a board specific
+ basis.
+
+ Note: This code doesn't work right now on the NAND booting image for the
+ Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cce4acbb68398634b8d011ed7bb0d12269c84230
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Dec 28 19:08:21 2006 +0100
+
+ Few V38B changes:
+ - fix a typo in V38B config file
+ - move watchdog initialisation earlier in the boot process
+ - add "wdt=off" to default kernel command line (disables kernel watchdog)
+
+commit 92eb729bad876725aeea908d2addba0800620840
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Dec 27 01:26:13 2006 +0100
+
+ Fix bug in adaption of Stefano Babic's CFI driver patch.
+
+commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Dec 24 01:42:57 2006 +0100
+
+ Minor code cleanup.
+
+commit d784fdb05900ada3686d5778783e1fb328e9fb66
+Author: Stefano Babic <sbabic@denx.de>
+Date: Tue Dec 12 00:22:42 2006 +0100
+
+ Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
+
+commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 22 14:29:40 2006 +0100
+
+ [PATCH] Fix sequoia flash autodetection (finally correct)
+
+ Now 32MByte and 64MByte FLASH is know to work and other
+ configurations should work too.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 82e5236a8b719543643fd26d5827938ab2b94818
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Fri Dec 22 10:30:26 2006 +0100
+
+ Minor code cleanup; update CHANGELOG.
+
+commit fa23044564091f05d9695beb7b5b9a931e7f41a4
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Thu Dec 21 17:17:02 2006 +0100
+
+ Added support for the TQM8272 board from TQ
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit c84bad0ef60e7055ab0bd49b93069509cecc382a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Dec 20 00:29:43 2006 +0100
+
+ Fix to make the baudrate changes immediate for the MCF52x2 family.
+
+commit daa6e418bcc0c717752e8de939c213c790286096
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Dec 20 00:27:32 2006 +0100
+
+ Preliminary support for the iDMR board (ColdFire).
+
+commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
+Author: Andrei Safronov <safronov@pollux.denx.de>
+Date: Fri Dec 8 16:23:08 2006 +0100
+
+ automatic update mechanism
+
+commit dd520bf314c7add4183c5191692180f576f96b60
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Nov 30 18:02:20 2006 +0100
+
+ Code cleanup.
+
+commit 8d9a8610b8256331132227e9e6585c6bd5742787
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Nov 30 01:54:07 2006 +0100
+
+ Code cleanup. Update CHANGELOG.
+
+commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Wed Nov 29 16:23:42 2006 +0100
+
+ [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
+
+ The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
+ not the XLB frequency.
+
+ This patch depends on the previous patches for MPC52xx device tree support
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
+
+commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 29 15:42:37 2006 +0100
+
+ [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
+
+ This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
+ and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
+ quite similar and share the same board directory "prodrive/p3mx"
+ and the same config file "p3mx.h".
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 29 12:53:15 2006 +0100
+
+ [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
+
+ In the bootvx command the load address was only read from the env
+ variable "loadaddr" and not optionally passed as paramter as described
+ in the help. This is fixed with this patch. The behaviour is now the
+ same as in the bootelf command.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 29 12:03:57 2006 +0100
+
+ [PATCH] include/ppc440.h minor error affecting interrupts
+
+ Fixed include/ppc440.c for UIC address Bug
+
+ Corrects bug affecting the addresses for the universal interrupt
+ controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
+
+ Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Tue Nov 28 16:17:27 2006 -0600
+
+ Make fsl-i2c not conflict with SOFT I2C
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 14198bf768fdc958e3c1afd2404e5262208e98d7
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Tue Nov 28 16:17:18 2006 -0600
+
+ Fix I2C master address initialization.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Nov 28 23:31:19 2006 -0600
+
+ Assign maintainers for mpc8349emds and mpc8360emds
+
+ Dave for mpc8360emds, and me for mpc8349emds.
+
+commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Nov 28 23:28:33 2006 -0600
+
+ Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
+
+ give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
+ since they are passed by reference to ucc_get_cmxucr_reg and assigned.
+
+commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Nov 28 12:09:35 2006 -0600
+
+ mpc83xx: Miscellaneous code style fixes
+
+ Implement various code style fixes and similar changes.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 28 17:55:49 2006 +0100
+
+ [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
+
+ This patch adds the code and configuration necessary to boot with an
+ arch/powerpc Linux kernel.
+
+ Signed-off-by: Grant Likely <grant.likely@gmail.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit e732faec95a83cb468b4850ae807c8301dde8f6a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 28 16:09:24 2006 +0100
+
+ [PATCH] PPC4xx: 440SP Rev. C detection added
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 28 11:04:45 2006 +0100
+
+ [PATCH] nand: Fix patch merge problem
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 27 22:53:53 2006 +0100
+
+ Update CHANGELOG
+
+commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:43:25 2006 +0100
+
+ [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
+
+ Patch below corrects the setting of the zmiifer register, it was
+ overwritting the register rather than ORing the settings.
+
+ Signed-off-by: Neil Wilson <NWilson@airspan.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d1a72545296800b7e219f93104ad5836f0003d66
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:34:10 2006 +0100
+
+ [PATCH] Select NAND embedded environment from board configuration
+
+ The current NAND Bootloader setup forces the environment
+ variables to be in line with the bootloader. This change
+ enables the configuration to be made in the board include
+ file instead so that it can be individually enabled.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 15784862857c3c2214498defcfed84ff137fb81e
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:22:19 2006 +0100
+
+ [PATCH] nand_wait() timeout fixes
+
+ Two fixes for the nand_wait() function in
+ drivers/nand/nand_base.c:
+
+ 1. Use correct timeouts. The original timeouts in Linux
+ source are 400ms and 20ms not 40s and 20s
+
+ 2. Return correct error value in case of timeout. 0 is
+ interpreted as OK.
+
+ Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit da5553b095bf04f4f109ad7e565dae3aba47b230
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:04:06 2006 +0100
+
+ [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
+
+ This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
+ arguments to bootm. It removes the getenv("disable_of") test that used
+ to be used for this purpose.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit a9398e018593782c5fa7d0741955fc1256b34c1e
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 27 15:32:42 2006 +0100
+
+ Minor code cleanup. Update CHANGELOG.
+
+commit 1729b92cde575476684bffe819d0b7791b57bff2
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:52:04 2006 +0100
+
+ [PATCH] 4xx: Fix problem with board specific reset code (now for real)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:49:51 2006 +0100
+
+ [PATCH] alpr: remove unused board specific flash driver
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:48:41 2006 +0100
+
+ [PATCH] 4xx: Fix problem with board specific reset code
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ec0c2ec725aec9524a177a77ce75559e644a931a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:46:06 2006 +0100
+
+ [PATCH] Remove testing 4xx enet PHY setup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:12:17 2006 +0100
+
+ [PATCH] Update Prodrive ALPR board support (440GX)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 78d620ebb5871d252270dedfad60c6568993b780
+Author: Wolfgang Denk <wd@atlas.denx.de>
+Date: Thu Nov 23 22:58:58 2006 +0100
+
+ Updates for TQM5200 modules:
+ - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
+ - simplify "udate" definitions
+
+commit 2053283304eeddf250d109e6791eb6fa4cad14f7
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 22 13:20:50 2006 +0100
+
+ [PATCH] PPC4xx start.S: Fix for processor errata
+
+ Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
+ errata 1.12: 440_33 by moving patch up in code.
+
+ Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4ef6251403f637841000e0fef9e832aa01339822
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 20 20:39:52 2006 +0100
+
+ [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 20 10:28:30 2006 +0100
+
+ Update CHANGELOG
+
+commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 13 13:55:24 2006 +0100
+
+ [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
+
+ * Adds support for AMD command set Top Boot flash geometry reversal
+ * Adds support for reading JEDEC Manufacturer ID and Device ID
+ * Adds support for displaying command set, manufacturer id and
+ device ids (flinfo)
+ * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
+ * Removes outdated change history (refer to git log instead)
+
+ Signed-off-by: Tolunay Orkun <listmember@orkun.us>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b21b511d4c50408f4853f46f06b601272196223f
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Nov 12 21:13:23 2006 +0100
+
+ Update CHANGELOG
+
+commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sat Nov 11 22:48:22 2006 +0100
+
+ Disable the watchdog in the default config for the V38B board.
+
+commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sat Nov 11 22:43:00 2006 +0100
+
+ Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
+ group is enabled for USB earlier (in cpu_init_f() instead of
+ usb_lowlevel_init()).
+
+commit 91650b3e4de688038d4f71279c44858e3e2c6870
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 6 17:06:36 2006 +0100
+
+ Sequential accesses to non-existent memory must be synchronized,
+ at least on G2 cores.
+
+ This fixes get_ram_size() problems on MPC5200 Rev. B boards.
+
+commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Nov 3 19:15:00 2006 -0600
+
+ mpc83xx: Update 83xx to use fsl_i2c.c
+
+ Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
+ cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
+ Added multiple I2C bus support to fsl_i2c.c.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit d239d74b1c937984bc519083a8e7de373a390f06
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Nov 3 12:00:28 2006 -0600
+
+ mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
+
+ Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
+ tree matches the other 8xxx trees.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit f7fb2e703ec9688541416962724adff70a7322cb
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Nov 2 19:47:11 2006 -0600
+
+ mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
+
+commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
+Author: Dave Liu <daveliu@freescale.com>
+Date: Thu Nov 2 18:05:50 2006 -0600
+
+ mpc83xx: Fix the incorrect dcbz operation
+
+ The 834x rev1.x silicon has one CPU5 errata.
+
+ The issue is when the data cache locked with
+ HID0[DLOCK], the dcbz instruction looks like no-op inst.
+
+ The right behavior of the data cache is when the data cache
+ Locked with HID0[DLOCK], the dcbz instruction allocates
+ new tags in cache.
+
+ The 834x rev3.0 and later and 8360 have not this bug inside.
+
+ So, when 834x rev3.0/8360 are working with ECC, the dcbz
+ instruction will corrupt the stack in cache, the processor will
+ checkstop reset.
+
+ However, the 834x rev1.x can work with ECC with these code,
+ because the sillicon has this cache bug. The dcbz will not
+ corrupt the stack in cache.
+ Really, it is the fault code running on fault sillicon.
+
+ This patch fix the incorrect dcbz operation. Instead of
+ CPU FP writing to initialise the ECC.
+
+ CHANGELOG:
+ * Fix the incorrect dcbz operation instead of CPU FP
+ writing to initialise the ECC memory. Otherwise, it
+ will corrupt the stack in cache, The processor will checkstop
+ reset.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Nov 1 00:10:40 2006 -0600
+
+ mpc83xx: add OF_FLAT_TREE bits to 83xx boards
+
+ add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
+ STDOUT_PATH configuration bits to mpc8349emds,
+ mpc8349itx, and mpc8360emds board code.
+
+ redo environment to use bootm with the fdtaddr
+ for booting ARCH=powerpc kernels by default,
+ and provide default fdtaddr values.
+
+commit 48041365b3420589ad464ebc7752e0053538b729
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Nov 1 00:07:25 2006 -0600
+
+ mpc83xx: change ft code to modify local-mac-address property
+
+ Update 83xx OF code to update local-mac-address properties
+ for ethernet instead of the obsolete 'address' property.
+
+commit 9ca880a250870a7d55754291b5591d2b5fe89b54
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 21:23:16 2006 -0600
+
+ mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
+
+ This patch also adds an improved I2C set_speed(), which handles all clock
+ frequencies.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit ac4b5622ce050b5ee1e154b98df630d778661632
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 31 19:54:59 2006 -0600
+
+ mpc83xx: add the README.mpc8360emds
+
+ add doc/README.mpc8360emds to accompany the new board support
+
+commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 3 12:11:15 2006 -0600
+
+ mpc83xx: add QE ethernet support
+
+ this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
+
+commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 3 19:33:44 2006 -0600
+
+ mpc83xx: Add MPC8360EMDS basic board support
+
+ Add support for the Freescale MPC8360EMDS board.
+ Includes DDR, DUART, Local Bus, PCI.
+
+commit 23892e49352de74f7fac36ff90bb1be143d195e3
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 31 19:30:40 2006 -0600
+
+ mpc83xx: add the QUICC Engine (QE) immap file
+
+ common QE immap file. Also required for 8360.
+
+commit b701652a4992bdcc62fb1a6038a85beef9e55da4
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 31 19:25:38 2006 -0600
+
+ mpc83xx: Add 8360 specifics to 83xx immap
+
+ Mainly add QE device dependencies, with appropriate 8360 protection.
+ Lindent also run.
+
+commit 988833324a7fda482c8ac3ca23eb539f8232e404
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 19:14:41 2006 -0600
+
+ mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
+
+ PREREQUISITE PATCHES:
+
+ * This patch can only be applied after the following patches have been applied:
+
+ 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
+ 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
+
+ CHANGELOG:
+
+ * For the 8349E-mITX, fix some size values in pci_init_board(), enable
+ the clock for the 2nd USB board (Linux kernel will hang otherwise),
+ and fix the CONFIG_BOOTARGS macro.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 18:44:42 2006 -0600
+
+ mpc83xx: Add support for the MPC8349E-mITX
+
+ PREREQUISITE PATCHES:
+
+ * This patch can only be applied after the following patches have been applied:
+
+ 1) DNX#2006090742000024 "Add support for multiple I2C buses"
+ 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
+ 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
+ 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
+ 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
+
+ CHANGELOG:
+
+ * Add support for the Freescale MPC8349E-mITX reference design platform.
+ The second TSEC (Vitesse 7385 switch) is not supported at this time.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 183da6d9b446cc12123455844ad1187e2375626f
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Tue Sep 12 10:15:53 2006 -0400
+
+ Additional MPC8349 support for multibus i2c
+
+ Hello,
+
+ Here is a patch for a file that was accidentally left out of a previous
+ attempt.
+
+ It accompanies the patch with ticket DNX#2006090742000024
+
+ CHANGELOG:
+ Change PCI initialization to use new multi-bus I2C API.
+
+ regards,
+ Ben
+
+commit b24f119d672b709d153ff2ac091d4aa63ec6877d
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Thu Sep 7 16:51:04 2006 -0400
+
+ Multi-bus I2C implementation of MPC834x
+
+ Hello,
+
+ Attached is a patch implementing multiple I2C buses on the MPC834x CPU
+ family and the MPC8349EMDS board in particular.
+ This patch requires Patch 1 (Add support for multiple I2C buses).
+ Testing was performed on a 533MHz board.
+
+ /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
+
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+ CHANGELOG:
+ Implemented driver-level code to support two I2C buses on the
+ MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
+ are 50kHz, 100kHz and 400kHz on each bus.
+
+ regards,
+ Ben
+
+commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Thu Sep 7 16:50:54 2006 -0400
+
+ Add support for multiple I2C buses
+
+ Hello,
+
+ Attached is a patch providing support for multiple I2C buses at the
+ command level. The second part of the patch includes an implementation
+ for the MPC834x CPU and MPC8349EMDS board.
+
+ /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
+
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+ Overview:
+
+ 1. Include new 'i2c' command (based on USB implementation) using
+ CONFIG_I2C_CMD_TREE.
+
+ 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
+ the commands to change bus number and speed are only available under the
+ new 'i2c' command mentioned in the first bullet.
+
+ 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
+ systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
+ of an array of bus-device pairs. Otherwise, it is an array of uchar.
+
+ CHANGELOG:
+ Added new 'i2c' master command for all I2C interaction. This is
+ conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
+ setting I2C bus speed as well as changing the active bus if the board
+ has more than one (conditionally compiled with
+ CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
+ Updated README.
+
+ regards,
+ Ben
+
+commit bed85caf872714ebf53013967a695c9d63acfc68
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 18:13:36 2006 -0600
+
+ mpc83xx: Add support for Errata DDR6 on MPC 834x systems
+
+ CHANGELOG:
+
+ * Errata DDR6, which affects all current MPC 834x processors, lists changes
+ required to maintain compatibility with various types of DDR memory. This
+ patch implements those changes.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit afd6e470f639883002c7c59d562690a5cb0f4865
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Oct 25 18:45:23 2006 -0500
+
+ mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
+
+commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Aug 22 17:07:00 2006 -0500
+
+ mpc83xx: Add support for variable flash memory sizes on 83xx systems
+
+ CHANGELOG:
+
+ * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
+ window registers, instead of using a hard-coded value of 8MB.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
+Author: Tanya Jiang <tanya.jiang@freescale.com>
+Date: Thu Aug 3 18:38:13 2006 +0800
+
+ mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
+
+ Unified TQM834x variable names with 83xx and consolidated macro
+ in preparation for the 8360 and other upcoming 83xx devices.
+
+ Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
+
+commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
+Author: Dave Liu <daveliu@freescale.com>
+Date: Wed Oct 25 14:41:21 2006 -0500
+
+ mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
+
+ Incorporated the common unified variable names and the changes in preparation
+ for releasing mpc8360 patches.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 3894c46c27c64891f93ac04edde86a9fa9758d92
+Author: Tanya Jiang <tanya.jiang@freescale.com>
+Date: Thu Aug 3 18:36:02 2006 +0800
+
+ mpc83xx: Fix missing build for mpc8349emds pci.c
+
+ Make pci build for mpc8349emds
+
+ Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
+
+commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
+Author: Tanya Jiang <tanya.jiang@freescale.com>
+Date: Thu Aug 3 18:39:49 2006 +0800
+
+ mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
+
+ Removed unused file resetvec.S for mpc83xx cpu
+
+ Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
+
+commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
+Author: Nick Spence <Nick.Spence@freescale.com>
+Date: Sat Sep 30 00:32:59 2006 -0700
+
+ NAND Flash verify across block boundaries
+
+ This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
+ defined
+ and the write crosses a block boundary. The pointer to the verification
+ buffer (bufstart) is not being updated to reflect the starting of the
+ new
+ block so the verification of the second block fails.
+
+ CHANGELOG:
+
+ * Fix NAND FLASH page verification across block boundaries
+
+commit f484dc791a3932537213c43c654cc1295c64b84c
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Sep 7 07:39:46 2006 -0700
+
+ Added RGMII support to the TSECs and Marvell 881111 Phy
+
+ Added a phy initialization to adjust the RGMII RX and TX timing
+ Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+
+commit c59200443072353044aa4bf737a5a60f9a9af231
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Nov 2 15:15:01 2006 +0100
+
+ Release U-Boot 1.1.6
+
+commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 02:04:38 2006 +0100
+
+ Finish up support for MarelV38B board
+ - add watchdog support
+ - enable GPIO_WKUP_7 pin for input
+ - code cleanup
+
+commit ffa150bc90c943ca265170bd1be3f293674dd5c7
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 01:45:46 2006 +0100
+
+ - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
+ * remove warnings when compiling ethaddr.c
+ * adjust linker script (fixes a crash resulting from incorrect
+ definition of __u_boot_cmd_start)
+ - Some MarelV38B code cleanup.
+
+commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 01:38:16 2006 +0100
+
+ - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
+ MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
+ Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
+ MPC5XXX_WU_GPIO_DATA_O for affected boards.
+
+ - Add defintions for some MPC5XXX GPIO pins.
+
+commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 01:34:29 2006 +0100
+
+ Changed MarelV38B board make target to lowercase. Config file cleanup.
+
+commit 1954be6e9c9421b45d0a9d05b10356acc7563150
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Oct 29 01:03:51 2006 +0200
+
+ Automatically adjust ARFLAGS so "make -s" is really silent.
+
+commit fae684e89844856383bdf101440889557df3e6b1
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 28 16:45:00 2006 +0200
+
+ [PATCH] omap925.c: Remove unused functions
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 28 17:12:58 2006 +0200
+
+ [PATCH] Add some missing machtypes for netstar & voiceblue boards
+
+ Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
+ numbers in code.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 856f054410cef52d868feb330168b2a4c4091328
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 28 15:55:52 2006 +0200
+
+ [PATCH] NAND: Partition name support added to NAND subsystem
+
+ chpart, nboot and NAND subsystem related commands now accept also partition
+ name to specify offset.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Oct 28 02:29:44 2006 +0200
+
+ Update CHANGELOG.
+
+commit 2751a95abd1b96911081c357e96a12fa97b40dee
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Oct 28 02:29:14 2006 +0200
+
+ Enable commandline editing and hush shell on all TQM boards.
+
+commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Oct 28 02:28:02 2006 +0200
+
+ README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
+
+commit 471a7be7a042e95e440f5de969c9765214ae8d6e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Oct 28 01:14:32 2006 +0200
+
+ Check for illegal character '=' in environment variable names.
+
+ Make sure the string passed as variable name does not contain a '='
+ character. This not only prevents the common error or typing
+ "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
+ also closes a backdoor which allowed to delete write-protected
+ environment variables, for example by using "setenv ethaddr=".
+
+commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Oct 28 00:38:39 2006 +0200
+
+ Minor code cleanup.
+
+commit e11887a77d81077416a2d1c5e0354916fee8c034
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Oct 26 17:55:31 2006 +0200
+
+ Don't pass any debug options directly to the assembler
+
+ When passing the -g option to gcc, gcc automatically selects a
+ suitable --g<format> option to pass on to the assembler.
+ Thus, there's no point in forcing a specific debug option on the
+ assembler using the -Wa mechanism.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Oct 27 07:47:22 2006 -0500
+
+ MPC86xx: Cleaned up unused and conditionally used local variables.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Fri Oct 27 11:55:21 2006 +0200
+
+ Fix "ar" flags in some Makefiles to allow for silent "make -s"
+
+commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Thu Oct 26 14:38:25 2006 -0400
+
+ Fix TSEC driver (now for real): avoid crashes if PHY is not attached
+ to a TSEC (e.g. a switch is connected via RMII) or
+ if the PHY is defective/incorrectly configured.
+
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Thu Oct 26 14:38:25 2006 -0400
+
+ Fix TSEC driver: avoid crashes if PHY is not attached
+ to a TSEC (e.g. a switch is connected via RMII) or
+ if the PHY is defective/incorrectly configured.
+
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Oct 26 16:24:31 2006 +0200
+
+ Code cleanup.
+
commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date: Wed Oct 25 15:48:59 2006 +0200
Finish up support for the ATSTK1000/ATSTK1002 boards
-
+
Add atstk1002_config target to Makefile and move the AVR32 section
down below Blackfin so that it doesn't end up in the middle of
MIPS.
-
+
Drop the autogenerated linker script thing for now. Will have to
revisit how to handle chips with different flash and RAM layout
later.
-
+
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
Date: Tue Oct 24 23:47:37 2006 -0500
Added support for Multi-Image files that contain a device tree
-
+
If a Multi-Image file contains a third image we try to use it as a
device tree. The device tree image is assumed to be uncompressed in the
- image file. We automatically allocate space for the device tree in memory
+ image file. We automatically allocate space for the device tree in memory
and provide an 8k pad to allow more than a reasonable amount of growth.
-
+
Additionally, a device tree that was contained in flash will now automatically
get copied to system memory as part of boot. Previously an error was
reported if one tried to boot a device tree that was in flash.
-
+
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
Add ATSTK1000 and ATSTK1002 board support
Patch by Haavard Skinnemoen, 06 Sep 2006
-
+
This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
daughterboard.
-
+
ATSTK1000 is a full-featured development board for AT32AP CPUs. It
has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
CompactFlash cards. For more information, please see this page:
-
+
http://www.atmel.com/dyn/products/tools.asp?family_id=682
-
+
The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
AT32AP7000 chip.
-
+
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
commit f93ae788c3640fcde5db383471d45548ff4060d0
Add common serial driver for Atmel AT32 and AT91 chips
Patch by Haavard Skinnemoen, 06 Sep 2006
-
+
This is a first attempt at creating a common serial driver for Atmel
chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
be possible to support AT91RM9200 and other ARM-based chips with some
minor modifications.
-
+
There's nothing fundamentally AVR32-specific in this driver, but it
does use some features which are currently only defined for the
AT32AP CPU port:
* gd->console_uart: A "struct device" containing information about
register mappings, gpio resources and clocks associated with the
UART device.
-
+
For more information about these features, please see the "AT32AP
CPU" patch.
Add AT32AP CPU and AT32AP7000 SoC support
Patch by Haavard Skinnemoen, 06 Sep 2006
-
+
This patch adds support for the AT32AP CPU family and the AT32AP7000
chip, which is the first chip implementing the AVR32 architecture.
-
+
The AT32AP CPU core is a high-performance implementation featuring a
7-stage pipeline, separate instruction- and data caches, and a MMU.
For more information, please see the "AVR32 AP Technical Reference":
-
+
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
-
+
In addition to this, the AT32AP7000 chip comes with a large set of
integrated peripherals, many of which are shared with the AT91 series
of ARM-based microcontrollers from Atmel. Full data sheet is
available here:
-
+
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
-
+
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
commit 7b64fef33c66be648826c0ff9758298ef13d0604
Add AVR32 architecture support
Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
-
+
This patch adds common infrastructure code for the Atmel AVR32
architecture. See doc/README.AVR32 for details.
-
+
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
commit 2da2d9a4766063b9848f3a35ad6025499cf87265
Use -g instead of -gstabs in AFLAGS_DEBUG
Patch by Haavard Skinnemoen, 30 Aug 2006
-
+
In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
matter what the target's preferred debugging format is. This patch
simply replaces -gstabs with -g, so that the default debugging format
Date: Fri Oct 20 17:16:35 2006 -0500
Use generic I2C register block on 85xx and 86xx.
-
+
Replace private IMMAP I2C structures with generic reg block
and allow 86xx to have multiple I2C device busses.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
Date: Fri Oct 20 15:54:34 2006 -0500
Fix compilation warnings on a few 85xx boards.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
And removed hard i2c path from a few u-boot.lds scipts too.
Minor whitespace cleanups along the way.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 4d45f69e362b05892c9e92a7907e5820995612aa
Rewrite a series of goto statements as a sequences of
conditional expressions instead.
-
+
Use consistent return code 0/-1 for good/bad indicators.
-
+
Include one fewer file if the driver isn't used at all.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 7237c033b02fe295880435f1eb80819a0c987532
Date: Thu Oct 19 11:02:16 2006 -0500
Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
-
+
in an effort to begin to unify the umpteen FSL I2C drivers that
are all otherwise very similar.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
Date: Thu Oct 19 11:33:52 2006 -0500
* Fix a bunch of compiler warnings for gcc 4.0
-
+
Signed-off-by: Matthew McClintock <msm@freescale.com>
commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
Fixed leading whitespace issues.
Removed spurious LAWAR thing.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
Date: Thu Oct 12 10:42:36 2006 -0500
Remove unneeded include files and local variable.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
Date: Tue Oct 10 00:23:32 2006 -0600
Fix possible uninitialized variable compiler warning.
-
+
When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
do_bootm_linux() may be uninitialized. There is no possibility in the
current code that len will get used uninitialized, but this fix follows
the existing convention of setting both len and data to zero at the same
time.
-
+
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
Date: Wed Oct 11 15:13:01 2006 -0500
* Fix a bunch of compiler warnings for gcc 4.0
-
+
Signed-off-by: Matthew McClintock <msm@freescale.com>
commit bf651baa365e5447246aad6a633ccd667cf24a39
Fix whitespace and 80-col issues.
+commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:36:51 2006 +0200
+
+ CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
+ Patch by Stefan Roese, 07 Oct 2006
+
+commit 5bc528fa4da751d472397b308137238a6465afd2
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:35:25 2006 +0200
+
+ Update ALPR code (NAND support working now)
+ Patch by Stefan Roese, 07 Oct 2006
+
+commit 77d5034847d328753b80c46b83f960a14a26f40e
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:33:03 2006 +0200
+
+ Remove compile warnings in fpga code
+ Patch by Stefan Roese, 07 Oct 2006
+
+commit f3443867e90d2979a7dd1c65b0d537777e1f9850
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:30:52 2006 +0200
+
+ Add CONFIG_BOARD_RESET to configure board specific reset function
+ Patch by Stefan Roese, 07 Oct 2006
+
commit f55df18187e7a45cb73fec4370d12135e6691ae1
Author: John Traill <john.traill@freescale.com>
Date: Fri Sep 29 08:23:12 2006 +0100
Fix missing tCycle/modfreq calculation.
-
+
Signed-off-by: John Traill <john.traill@freescale.com>
commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
Date: Wed Sep 13 10:34:18 2006 -0500
Add support for eTSEC 3 & 4 on 8548 CDS
-
+
* Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
This will only work on rev 1.3 boards (but doesn't break older boards)
* Cleaned up some comments to reflect the expanded role of tsec
Date: Wed Sep 13 10:33:56 2006 -0500
Added code to support 2.6.18 PCI changes in u-boot
-
+
* Added code to swizzle the IRQ map for the PCI
commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
Date: Tue Sep 19 09:34:10 2006 -0500
Modified makefile for new build mechanism.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit d14ba6a798beb753e7a864500414fcc2d198b8bc
Both 8641 and 8641D have SVR == 0x8090, and are distinguished
by the byte in bits 16-23 instead.
Thanks to Jason Jin for noticing.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
Fixed an OF-tree off-by-one bug when adding a new property name.
This bug will cause the kernel booting to pause a long time.
-
+
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
(cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
Fixed an OF-tree off-by-one bug when adding a new property name.
This bug will cause the kernel booting to pause a long time.
-
+
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
Change ramdiskaddr and dtbaddr
Remove PEX fluff commands.
-
+
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Date: Wed Aug 23 13:32:45 2006 -0500
* Another small fix for booting with disable_of
-
+
Signed-off-by: Matthew McClintock <msm@freescale.com>
commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
Date: Wed Aug 23 19:15:12 2006 +0800
Add AHCI define and sata support for MPC8641HPCN board.
-
+
Signed-off-by:Jason Jin<jason.jin@freescale.com>
commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
Date: Wed Aug 23 19:10:44 2006 +0800
Add AHCI support to u-boot
-
+
Add AHCI support in u-boot, enable the sata disk controllers which
following the AHCI protocol.
-
+
Signed-off-by:Jason Jin<jason.jin@freescale.com>
commit d8ea2acf5f137cae99417df4f573d036ee384668
Date: Wed Aug 23 17:54:32 2006 +0800
Add dtb boot-up parameter to default boot commands.
-
+
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
commit b93775c2036b99baa390ea425c4771895bbc63c4
Date: Tue Aug 22 09:31:59 2006 -0500
Fix disable_of booting
-
+
Signed-off-by: Matthew McClintock <msm@freescale.com>
commit 87a449c8ac396420cb24260f717ea9e6faa82047
Date: Tue Aug 22 09:23:55 2006 -0500
Support for FDT in uImage format, error when using FDT from flash
-
+
Signed-off-by: Matthew McClintock <msm@freescale.com>
commit 75c299c38369d01addd5e054b8a16217b70f4a86
Date: Wed Aug 16 13:59:47 2006 -0500
* Fix disable_of booting
-
+
Signed-off-by: Matthew McClintock <msm@freescale.com>
commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
Date: Wed Aug 16 10:54:09 2006 -0500
* Support for FDT in uImage format, error when using FDT from flash
-
+
Signed-off-by: Matthew McClintock <msm@freescale.com>
+commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 15 14:22:35 2006 +0200
+
+ Add initial support for the ALPR board from Prodrive
+ NAND needs some additional testing
+ Patch by Heiko Schocher, 15 Aug 2006
+
+commit f0ff4692ff3372dec55074a8eb444943ab095abb
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 15 14:15:51 2006 +0200
+
+ Add FPGA Altera Cyclone 2 support
+ Patch by Heiko Schocher, 15 Aug 2006
+
commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
Author: Jon Loeliger <jdl@freescale.com>
Date: Mon Aug 14 15:33:38 2006 -0500
Fix BAT0 to actually be cacheable, non-guarded as documented.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 40bc83559db5745681909fd7382ae509567e116d
Removed MPC8641HPCN DTS source file from build.
It is no longer linked into U-Boot; its sources are
now located in the kernel tree.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
Date: Wed Jun 28 10:47:03 2006 -0500
* Switched default PCI speed for 8540 ADS back to 33MHz
-
+
* Added comments and a printf to warn that PCI-X won't
work at 33MHz
Patch by Andy Fleming 17-Mar-2006
-
+
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
Date: Wed Jun 28 10:46:35 2006 -0500
* Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
-
+
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
Date: Wed Jun 28 10:46:13 2006 -0500
* Added VIA configuration table
-
+
* Added support for PCI2 on CDS
Patch by Andy Fleming 17-Mar-2006
-
+
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit c88f9fe66b64247e5b6a38410ba315ca25596d16
Date: Wed Jun 28 10:45:41 2006 -0500
* Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
-
+
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit 97074ed9655309b64231bc2cee69fe85399f8055
Date: Wed Jun 28 10:45:17 2006 -0500
* Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
-
+
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
Date: Wed Jun 28 10:44:49 2006 -0500
* Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
-
+
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit a4e11558b810ef2cddffdf7b9d86bc1130441960
Date: Wed Jun 28 10:44:23 2006 -0500
* Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
-
+
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
Date: Wed Jun 28 10:43:36 2006 -0500
* Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
Date: Wed Aug 9 14:33:50 2006 +0100
Add Rapidio support for the MPC8641HPCN
-
+
Signed-off-by: John Traill <john.traill@freescale.com>
commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
Date: Tue Aug 8 11:32:43 2006 +0100
Fix caslat calculation
-
+
Signed-off-by: John Traill <john.traill@freescale.com>
commit 709d3073e74153278e7904a70819bbef7df50e1a
Date: Fri Jul 28 00:01:34 2006 +0800
Fixed OF device tree of mpc86xxhpcn board.
-
+
The changes works in with kernel irq mapping rework.
-
+
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
commit bea3f28d285942bf3f7ab339ce85178ded544225
Date: Wed Jul 12 10:48:05 2006 -0400
Add support for reading and writing mac addresses to or from ID EEPROM.
-
+
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
With attached patch, we can use command "mac/mac read/mac save/"
to read and write EEPROM under u-boot prompt.
-
+
U-boot will calculate the checksum of EEPROM while bootup,
if it is right, then u-boot will check whether the mac address
of eTSEC0/1/2/3 is availalbe (non-zero).
-
+
If there is mac address availabe in EEPROM, u-boot will use it,
otherewise, u-boot will use the mac address defined in
MPC8641HPCN.h. This matches the requirement to set unique mac address
for each TSEC port.
-
+
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Date: Thu Jul 13 10:35:10 2006 -0500
Fixed initrd issue by define big RAM
-
+
Signed-off-by:Jason Jin <Jason.jin@freescale.com>
commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
We made a u-boot patch to fix the hang up issue
when booting filesystem from ramdisk.
-
+
Signed-off-by:Jason Jin <Jason.jin@freescale.com>
commit 38433ccc5850ee70549af0b2bc5b920355ef5388
* Added comments and a printf to warn that PCI-X won't
work at 33MHz
Patch by Andy Fleming 17-Mar-2006
-
+
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
* Fixed a bug where 8555 PCI code used the old variable and
function names
Patch by Andy Fleming 17-Mar-2006
-
+
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
* Added VIA configuration table
* Added support for PCI2 on CDS
Patch by Andy Fleming 17-Mar-2006
-
+
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
* Fixed PCI memory definitions
Patch by Andy Fleming 17-Mar-2006
-
+
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit 087454609e47295443af793a282cddcd91a5f49c
* Added support for initializing second PCI bus on 85xx
Patch by Andy Fleming 17-Mar-2006
-
+
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
* Added PCI-X #defines for PCI-X initialization
Patch by Andy Fleming on 17-Mar-2006
-
+
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
* Made sure the code which disables prefetch for PCI devices
sets the size of the prefetch region to 0
Patch by Andy Fleming on 17-Mar-2006
-
+
Signed-off-by: Andy Fleming <afleming@freescale.com>
commit 40d5fa35d02df22580593bf0039ab173367e8ef0
* Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
Patch by Jon Loeliger 17-Jan-2006
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit be7e8b0cb5a0c49dc180075b96df296a893bf146
Date: Wed Jun 28 08:43:56 2006 -0500
Change Id to symbolic name for RTL8139
-
+
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
Date: Tue Jun 27 18:12:10 2006 +0800
Fix RTL8139 in big endian
-
+
signed-off-by: Jason Jin <Jason.Jin@freescale.com>
signed-off-by: Wei Zhang <wei.zhang@freescale.com>
Date: Tue Jun 27 18:12:23 2006 +0800
Fix Tsec bug when no link
-
+
When tftp a non-exist file from the tftp server, u-boot will check
the link of all eth port. The original file will return wrong link
state on the no link ports.
-
+
signed-off-by: Jason Jin <Jason.Jin@freescale.com>
commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
Date: Tue Jun 27 18:12:02 2006 +0800
Fix bug for io_bar size during pci scan
-
+
During the pci scan process, Some devices return bar_reponse with the
highest bytes 0, such as the pci bridge in uli1575 return bar_response
with 0xffffff, So the bar_size should be manually set under 64K.
-
+
Signed-off-by: Jason Jin <jason.jin@freescale.com>
commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
Date: Tue Jun 27 18:11:54 2006 +0800
Enable PCIE1 for MPC8641HPCN board
-
+
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
Date: Thu Jun 22 08:51:46 2006 -0500
Fix bug in 8641hpcn reset command with no args.
-
+
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Do not enable address translation on secondary CPUs.
Do not set up BATs on secondary CPUs. Let Linux do the nasty.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 8ecc971618f56029ad99d3516f8b297a6ed58971
Date: Wed Jun 7 10:53:55 2006 -0500
Fix a get_board_sys_clk() use-before-def warning.
-
+
Signed-off-by: Jon Loeliger <jdl@jdl.com>
commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
Date: Wed Jun 7 10:52:49 2006 -0500
Allow DTC path to be passed in.
-
+
Signed-off-by: Jon Loeliger <jdl@jdl.com>
commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
Date: Wed May 31 13:55:35 2006 -0500
Review cleanups.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
Convert printf() to puts() where possible.
Use #include "spd_sdram.h" as needed.
Enhanced reset command usage message a bit.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
Date: Wed May 31 11:39:34 2006 -0500
Removed unneeded local_bus_init() from 8641HPCN board.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 4d3d729c16c392d2982d3266b659d333c927697d
Date: Wed May 31 11:24:28 2006 -0500
Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit b2a941de060350ad15878d8219825f4950e9bb8e
Date: Wed May 31 10:07:28 2006 -0500
Remove dead debug code.
-
+
Signed-off-by: Jon Loeliger <jdl@jdl.com>
commit 126aa70f10ba3d20e0a6f4d32328250513b77770
Date: Tue May 30 17:47:00 2006 -0500
Move mpc86xx PIXIS code to board directory
-
+
First cut at moving the PIXIS platform code out of
the 86xx cpu directory and into board/mpc8641hpcn
where it belongs.
-
+
Signed-off-by: Jon Loeliger <jdl@freescale.com>
commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
Date: Tue May 30 09:10:32 2006 -0500
Improve "reset" command's interaction with watchdog.
-
+
"reset altbank" will reset another bank WITHOUT watch dog timer enabled
"reset altbank wd" will reset another bank WITH watch dog enabled
"diswd" will disable watch dog after u-boot boots up successfully
-
+
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
Date: Tue May 30 08:51:19 2006 -0500
Fix two SDRAM setup bugs.
-
+
Fix ECC setup bug.
Enable 1T/2T based on number of DIMMs present.
-
+
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
commit d11fec5015334deb2010e36ce00bb118cc5429a5
Date: Fri May 26 10:24:48 2006 -0500
Add first draft of the MPC8641HPCN doc/README.
-
+
Signed-off-by: Jon Loeliger <jdl@jdl.com>
commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
Added pci@8000 block.
Updated ethernet interrupt mappings (moved up 48).
Cleaned up a few comments.
-
+
Signed-off-by: Jon Loeliger <jdl@jdl.com>
commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
Date: Fri May 26 10:01:16 2006 -0500
Allow args on reset command.
-
+
Signed-off-by: Jon Loeliger <jdl@jdl.com>
commit 14e37081ff3cac7ebe6e93836523429853b6b292
Remove unneeded INIT_RAM_LOCK cache twiddling.
Correctly tracks r29 as global data pointer now.
-
+
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
Date: Tue May 9 08:23:49 2006 -0500
Get MPC8641HPCN flash images working.
-
+
Enable the CFI driver.
Remove bogus LAWBAR7 cruft.
Use correct TEXT_BASE, Fixup load script.
projects / karo-tx-uboot.git / blobdiff