+commit 76957cb3d621bf664311908e5962e151c633c285
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Mar 1 12:11:40 2008 +0100
+
+ ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
+
+ The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
+ currently 4k/2k is configured. This patch fixes this issue.
+
+ Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 118978c8eb43803e2794233922df4249fa278b83
+Author: Woodruff, Richard <r-woodruff2@ti.com>
+Date: Fri Feb 29 17:34:35 2008 -0600
+
+ Fix alignment error on ARM for modules
+
+ Fix alignment fault on ARM when running modules. With out an explicit
+ linker file gcc4.2.1 will half word align __bss_start's value. The word
+ dereference will crash hello_world.
+
+ signed-off-by Richard Woodruff <r-woodruff2@ti.com>
+
+commit ce1120dd703e6f12c59e4eba9962356a0300b832
+Author: Dave Liu <r63238@freescale.com>
+Date: Fri Feb 29 17:45:31 2008 +0800
+
+ fs: Fix ext2 read issue
+
+ The ext2 aligned process will corrupt the key
+ data struct, the patch fix this.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 2 22:45:33 2008 +0100
+
+ Makefile: cleanup "clean" target
+
+ Make sure CDPATH settings cannot interfere.
+ Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ffda586fc1373243c9794babde69500f6293a8d8
+Author: Li Yang <leoli@freescale.com>
+Date: Fri Feb 29 11:46:05 2008 +0800
+
+ add cscope build target
+
+ Add cscope build target to generate cscope database for code browsing.
+
+ Signed-off-by: Li Yang <leoli@freescale.com>
+
+commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Feb 27 15:06:39 2008 -0600
+
+ net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
+
+ erratum 5.6 states the autoneg completion bit is functional only if the
+ autoneg bit is asserted.
+
+ This fixes any secondarily-issued networking commands on non-gigabit
+ links on the mpc8360 mds board.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5f91db7f582ca17b1f19f10189c025696f333d2e
+Author: John Rigby <jrigby@freescale.com>
+Date: Tue Feb 26 09:38:14 2008 -0700
+
+ MPC5121e ADS PCI support take 3
+
+ Adds PCI support for MPC5121
+
+ Tested with drivers/net/rtl8139.c
+
+ Support is conditional since PCI on old silicon does not work.
+
+ ads5121_PCI_config turns on PCI
+
+ In this version, condition compilation of PCI code has been moved
+ from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
+ suggested by Jean-Christophe PLAGNIOL-VILLARD
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 44b4dbed4133f657705b7c5193209da9978243a7
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Mon Feb 25 23:53:07 2008 +0100
+
+ Fix warnings while compilation of post/drivers/memory.c
+
+ Fix warnings while compilation with new gcc in eldk-4.2
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Mon Feb 25 20:54:04 2008 +0100
+
+ ppc4xx: Fix problem in 4xx_enet.c driver
+
+ U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
+ enabled. To reproduce the problem ensure that 'ethrotate'
+ environment variable isn't set to "no" and then run
+ "tftp 200000 not_existent_file".
+ This patch tries to fix the issue.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Mon Feb 25 20:04:20 2008 +0100
+
+ POST: Disable cache while SPR POST
+
+ Currently (since commit b2e2142c) u-boot crashes on
+ sequoia board while SPR test if CONFIG_4xx_DCACHE is
+ enabled. This patch disables the cache while SPR test.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Feb 25 17:52:40 2008 +0100
+
+ TQM5200: use automatic fdt memory fixup (part 2)
+
+ Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
+ TB5200 and TB5200_B to fixup the /memory node with the memory values
+ detected by U-Boot.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 44ceec253ea941b301abf4b079d52324def69d92
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Feb 25 15:17:05 2008 +0100
+
+ TQM5200: use automatic fdt memory fixup
+
+ Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
+ TB5200 and TB5200_B to fixup the /memory node with the memory values
+ detected by U-Boot.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Feb 25 13:27:52 2008 +0100
+
+ TQM5200: fix bug in SDRAM initialization code
+
+ This patch fixes a bug in the SDRAM initialization code for the
+ TQM5200. The hi_addr bit is now set correctly. Without this patch
+ the hi_addr bit is always set to 1, if the second SDRAM bank is
+ not populated.
+
+ For other MPC5200 boards a correspondig patch has already been applied
+ some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+ --
+ Forget the first patch please. I confused flash with SDRAM in
+ the comment ...
+
+commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Feb 25 00:03:12 2008 +0100
+
+ mx1fs2/flash: Fix multiple compiler warnings
+
+ "pointer targets in assignment differ in signedness"
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Feb 25 00:03:11 2008 +0100
+
+ arm-imx: Fix register definitions
+
+ Sync register definitions with linux
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Feb 25 00:03:10 2008 +0100
+
+ actua1/actua2/actua3: Fix multiple unused variable warnings
+
+ - actua1:
+ actux1.c: In function 'checkboard':
+ actux1.c:92: warning: unused variable 'revision'
+
+ - actua2:
+ actux2.c: In function 'checkboard':
+ actux2.c:100: warning: unused variable 's'
+ actux2.c:99: warning: unused variable 'revision'
+ actux2.c: In function 'reset_phy':
+ actux2.c:130: warning: unused variable 'i'
+
+ - actua3:
+ actux3.c: In function 'checkboard':
+ actux3.c:114: warning: unused variable 'revision'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sun Feb 24 11:44:29 2008 +0900
+
+ Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
+
+ The previous patch was lacking of i386, microblaze, nios and nios2. This
+ patch tries to fix them.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 16:30:47 2008 -0600
+
+ 85xx: Don't icbi when unlocking the cache
+
+ There is no reason to icbi when invalidating the temporary stack in
+ the d-cache. Its impossible on e500 to have the i-cache contain
+ any addresses in the temp stack and it can be problematic in generating
+ transactions on the bus to non-valid addresses.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Feb 27 15:50:50 2008 -0600
+
+ Fix source for ECM error IVPR
+
+ The source vector for the ECM was being set to 2,
+ but that's what the source vector for DDR was being
+ set to. Change it to 1.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Feb 27 14:29:58 2008 -0600
+
+ Invalidate INIT_RAM TLB mappings
+
+ Commit 0db37dc... (and some others) changed the INIT_RAM TLB
+ mappings to be unguarded. This collided with an existing "bug"
+ where the mappings for the INIT_RAM were being kept around.
+ This meant that speculative loads to those addresses were
+ succeeding in the TLB, and going out to the bus, where they
+ were causing an exception (there's nothing at that address). The
+ Flash code was coincidentally causing such a speculative load.
+ Rather than go back to mapping the INIT RAM as guarded, we fix
+ it so that the entries for the INIT_RAM are invalidated. Thus
+ the speculative loads will fail in the TLB, and have no effect.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 22:56:17 2008 +0100
+
+ sbc8548: Fix Revision reading and unused variable 'path'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 495d162374c472f46454453553382ad0735dc725
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 22:56:16 2008 +0100
+
+ sbc8548: Fix cfi flash bank declaration
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Feb 25 13:13:37 2008 -0600
+
+ 86xx: Fix renamed GUR symbols in sbc8641d board.
+
+ Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
+ (86xx: Fix GUR PCI config registers properly), we should have
+ changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
+ symbols in the sbc8641d board as well. Fix this oversight.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 64cd594e623c39f73964d18787763e4533f791f7
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Feb 25 16:50:48 2008 +0100
+
+ ppc4xx: Fix acadia_nand build problem
+
+ Don't include testdram() on NAND-booting target acadia_nand. This saves
+ a few bytes and makes the target build clean again.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 14e099e698d41e8179d05c2b2dbcf704a236f748
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 24 23:03:12 2008 +0000
+
+ mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 724902c8464e610642b3a170278b99710325888e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 24 23:03:11 2008 +0000
+
+ arm-imx: Fix registers definition
+
+ Sync registers definition with linux
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4cd288b589ea1178947c6e364453c32b3dede6b7
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 24 23:03:10 2008 +0000
+
+ actua1/actua2/actua3: Fix multipleunused variable
+
+ - actua1:
+ actux1.c: In function 'checkboard':
+ actux1.c:92: warning: unused variable 'revision'
+
+ - actua2:
+ actux2.c: In function 'checkboard':
+ actux2.c:100: warning: unused variable 's'
+ actux2.c:99: warning: unused variable 'revision'
+ actux2.c: In function 'reset_phy':
+ actux2.c:130: warning: unused variable 'i'
+
+ - actua3:
+ actux3.c: In function 'checkboard':
+ actux3.c:114: warning: unused variable 'revision'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b29661fc1151077776454288051bc9a488351ce8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Feb 24 15:21:36 2008 +0100
+
+ Coding style cleanup. Prepare v1.3.2-rc2 release candidate
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 00b48a48424894daa589d166d73277830b1c6ac4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Feb 23 12:15:56 2008 +0100
+
+ ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b075d74efb70ff68c49a2532f26b56d6703b69c1
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Feb 23 17:24:16 2008 +0900
+
+ Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
+
+ ----------------------------------------------------------------
+ Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
+
+ Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
+ 32bit targets.
+
+ GCC can be made to warn about usage of long long types with ISO C90
+ (-ansi), but only with -pedantic. You can write this in a way that even
+ then it doesn't cause warnings, namely by:
+
+ #ifdef __GNUC__
+ __extension__ typedef __signed__ long long __s64;
+ __extension__ typedef unsigned long long __u64;
+ #endif
+
+ The __extension__ keyword in front of this switches off any pedantic
+ warnings for this expression.
+
+ Signed-off-by: Olaf Hering <olh@suse.de>
+ Cc: <linux-arch@vger.kernel.org>
+ Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+ ----------------------------------------------------------------
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 208acd112e6517b21fc30c420396902b103563ac
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Feb 23 17:07:57 2008 +0900
+
+ cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
+
+ This will reduce the build time.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Feb 23 17:05:00 2008 +0900
+
+ cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
+
+ This will reduce the build time.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Feb 23 16:58:41 2008 +0900
+
+ cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
+
+ This reduces the build time by ~10%. Here's the gth2_config example.
+
+ BEFORE AFTER
+ real 0m31.441s 0m27.833s
+ user 0m24.766s 0m23.045s
+ sys 0m10.425s 0m7.468s
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
+Author: Marcel Moolenaar <marcelm@juniper.net>
+Date: Fri Feb 22 10:48:07 2008 -0800
+
+ make define2mk.sed work on FreeBSD
+
+ In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
+ the define2mk.sed script was identified as the source of the link
+ failure on FreeBSD. The problem is that sed(1) does not always support
+ the '+' operator. It isn't on FreeBSD. The attach patch implements the
+ equivalent, using the '*' operator instead and should work everywhere.
+
+ Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
+
+commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Feb 22 17:21:32 2008 +0100
+
+ Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
+
+ The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
+ final traces of long-deprecated "ramdisk" kernel parm") makes these
+ changes neccessary.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
+Author: Larry Johnson <lrj@acm.org>
+Date: Thu Feb 21 13:58:16 2008 -0500
+
+ LM75 bug fix for negative temperatures
+
+ When the LM75 temperature sensor measures a temperature below 0 C, the
+ current driver does not perform sign extension, so the result returned is
+ 256 C too high. This patch fixes the problem.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 5a910c224b13e413bda41922379add6d75c32da3
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Feb 21 18:33:45 2008 +0100
+
+ IDS8247: update MAINTAINER entry.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Feb 21 18:31:15 2008 +0100
+
+ Fix device tree for mgsuvd board.
+
+ Rename the "scc" node in "ethernet" for the mgsuvd board.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu Feb 21 14:23:42 2008 +0100
+
+ lwmon5: enable hardware watchdog
+
+ Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
+ causing it to reboot the board if U-Boot does a long busy-wait with
+ udelay(). Thus, for these boards we have to restart WD more
+ frequently.
+
+ This patch splits the busy-wait udelay() into smaller, predefined,
+ intervals, so that the watchdog timer may be resetted with the
+ configurable (CONFIG_WD_PERIOD) interval.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Feb 21 12:52:29 2008 +0100
+
+ ppc4xx: Support for ATI Radeon 9200 card on sequoia
+
+ Adds configuration option for ATI Radeon 9200 card
+ support to sequoia config file. If CONFIG_VIDEO
+ is enabled, TEXT_BASE should be changed to 0xFFF80000.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Feb 18 08:18:07 2008 -0600
+
+ Remove duplicate defines for ARRAY_SIZE
+
+ A few duplicate of the ARRAY_SIZE macro sneaked in since we put
+ the define in common.h.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Feb 18 08:09:37 2008 -0600
+
+ ppc: Allow boards to specify effective amount of memory
+
+ For historical reasons we limited the stack to 256M because some boards
+ could only map that much via BATS. However newer boards are capable of
+ mapping more memory (for example 85xx is capable of doing up to 2G).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:24:13 2008 -0500
+
+ include autoconf.mk before any other .mk files
+
+ This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
+ those .mk files can have make if statements based on the current config.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 18 05:10:07 2008 -0500
+
+ error check autoconf.mk generation
+
+ If any of the steps for generating autoconf.mk fail currently, they go
+ unnoticed. To fix, we can simply add 'set -e' to the long list of commands.
+ This is simpler and more robust than placing '|| exit $$?' after every line.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 019895a8dee71a9f00da05c03e379f45d581b0fe
+Author: Stefano Babic <sbabic@denx.de>
+Date: Mon Feb 18 08:03:51 2008 +0100
+
+ Fix bug in dependency checking
+
+ By adding VERSION_FILE to the PHONY targets the script
+ /tools/setlocalversion is always called and version_autogenerated.h
+ is replaced only if the script find a modified source file.
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 98ba144ccc912eee90dd42699f023c497ce774c6
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Feb 18 14:35:43 2008 +0900
+
+ Fix GPMC CS2 memory setup at apollon
+
+ It disables the current map first
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 23:52:46 2008 +0100
+
+ uli526x: Fix multiple differ in signedness and parentheses around comparison
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 16:58:04 2008 +0100
+
+ MIPS: Fix CFG_NO_FLASH support
+
+ - Fix flash_init call when CFG_NO_FLASH is used
+ - Remove no more needed flash.c for qemu-mips
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Feb 16 02:40:18 2008 -0500
+
+ easylogo: clean up some more and add -r (rgb) support
+
+ Michael Hennerich added support for outputting an image in RGB format rather
+ than forcing YUYV all the time. This makes obvious sense if the display you
+ have takes RGB input rather than YUYV.
+
+ Rather than hack in support for options, I've converted it to use getopt and
+ cleaned up the argument parsing in the process.
+
+ Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f65c98129ccada3f7caf97d80395a95b84e911de
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Feb 16 02:12:37 2008 -0500
+
+ Makefile: add target for $(LDSCRIPT)
+
+ If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
+ then change into the board directory and try and create it. This allows you
+ to generate the linker script on the fly based upon board defines (like the
+ Blackfin boards do).
+
+ There should be no regressions due to this change as the normal case is to
+ already have a u-boot.lds file. If that's the case, then there's nothing to
+ generate, and so make will always exit. The fix here is that if the linker
+ script does not exist, the implicit rules take over and attempt to guess how
+ to generate the file.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Mon Feb 18 23:16:35 2008 +0100
+
+ CFI: Do not use uninitialized cmd_reset
+
+ Do not use uninitialized cmd_reset; issue both AMD and Intel reset
+ commands instead
+
+ From a short test, it looks like AMD-style flash roms treat *any* unknown
+ command write as a reset, at least when in CFI Query mode, so issuing the
+ Intel reset command to AMD-style flashs seems safe (from the small sample I
+ have), plus the 3-cycle magic sequence should kick the state machine into
+ the right state even without a reset command. Since the AMD-style flashs
+ require the unlock sequence for real operation, I chose to try the AMD reset
+ command first, so that Intel flashs do no see an invalid command prior to
+ the CFI query.
+
+ I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
+ plus Intel StrataFlash.
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Thu Feb 21 11:56:44 2008 +0100
+
+ API: Add (c) and licensing notice to the public API header.
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu Feb 21 11:06:07 2008 +0100
+
+ Fix CPU POST test failure
+
+ The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
+ ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
+ by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
+ This patch just saves the CR value before running the test code, so allowing
+ it to do anything it wants with CR.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Acked-by: Yuri Tikhonov <yur@emcraft.com>
+ --
+
+commit d5908b093955415f3d340706378b991f911af671
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Feb 20 15:26:51 2008 -0600
+
+ 8610HPCD: Document the flashbank selection switches.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a551cee99ad1d1da20fd23ad265de47448852f56
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Feb 20 14:22:26 2008 -0600
+
+ 86xx: Fix GUR PCI config registers properly.
+
+ Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
+ I tried to "8610HPCD: Fix typos in two PCI setup registers", I
+ botched it due to not realizing that 8610 and 8641 had different
+ Global Utility Register defintions, one of which was like 85xx,
+ and the other wasn't. Correct this problem by introducing two
+ symbols, one for each 86xx SoC, but neither of which is named
+ anything like 85xx.
+
+ My bad. Lovely Wednesday with git bisect. You know.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit cb06eb961bdffc8728b38c242473d802e83ab2b4
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Feb 20 12:24:11 2008 -0600
+
+ 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
+
+ Without an actual supported video card hooked up, enabling
+ the CONFIG_VIDEO by default just makes it look broken by
+ routing all console output to the video card. Don't.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4d264eff4312f230776b913edade7ceb75f1b1e0
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jan 30 15:08:15 2008 -0600
+
+ ColdFire: Fix missing code flash size for M5485EVB
+
+ Signed-off-by: James Mahan <kmahan@freescale.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
+Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jan 30 15:04:42 2008 -0600
+
+ ColdFire: Fix 5282 and 5271 interrupt mask bit
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Feb 19 12:31:08 2008 -0600
+
+ 8610HPCD: Fix typos in two PCI setup registers.
+
+ The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
+ were erroneously present as 85xx names and values, leftover from
+ the clone wars. Fix this by removing the 85xx cruft from the
+ 86xx codebase.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Feb 18 14:01:56 2008 -0600
+
+ 86xx: Convert sbc8641d to use libfdt.
+
+ This is the proper fix for a missing closing brace in the function
+ ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
+ The ft_cpu_setup() function in mpc8641hpcn.c should have been
+ removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
+ but was missed. Only, the sbc8641d was nominally still using it.
+ It all got ripped out, and the funcality that was in ft_board_setup()
+ was refactored to remove the CPU portions into the new file
+ cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now.
+
+ Based loosely on an original patch from joe.hamman@embeddedspecialties.com
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 04efddc87c50c84f85dad5c331c634a6ce830a83
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 23:35:31 2008 +0100
+
+ mpc86xx: Fix unused variable 'config' and 'immap'
+
+ and remove useless CONFIG_DDR_INTERLEAVE
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 23:03:36 2008 +0100
+
+ mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b6f29c84c208a091f95a10cbc9852d729659ba20
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 14:15:31 2008 +0100
+
+ s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 14:15:32 2008 +0100
+
+ pxa: fix assignment from incompatible pointer type
+
+ fix mmc_bread function prototype
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 64d792063fff90b8118179b092feee09fe5cae13
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 17 14:15:30 2008 +0100
+
+ at91cap9adk: fix implicit declaration of function 'eth_init'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Feb 17 15:43:44 2008 +0100
+
+ Remove files added by mistake, update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
+Author: Mike Nuss <mike@terascala.com>
+Date: Wed Feb 6 11:10:11 2008 -0500
+
+ PPC440EPx: Optionally enable second I2C bus
+
+ The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
+ PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
+ code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
+
+ Signed-off-by: Mike Nuss <mike@terascala.com>
+ Cc: Stefan Roese <sr@denx.de>
+
+commit ef5b4f221c22d05770878513951745f236b5b43f
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Tue Feb 5 10:26:44 2008 +0100
+
+ ppc4xx: HCU4/5. Cleanup configs
+
+ - hcu4.h: Removed define of CONFIG_PPC405GPr
+ - Corrected phy addresses
+ - Fix boot variables
+ - Respect line length of 80 chars
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 74973126d1be63ac75bdc192f46234dca3a7c421
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Tue Feb 5 11:31:28 2008 +0100
+
+ ppc4xx: HCU4/5. Cleanups
+
+ - Fix some coding style violations.
+ - Use in/out_u16/32 where appropriate.
+ - Use register names from ppc405.h.
+ - Fix trace useage for Lauterbach.
+ - Remove obsolete generation HCU2.
+ - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Tue Feb 5 10:26:41 2008 +0100
+
+ ppc4xx: PPC405GPr fix missing register definitions
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 214398d9cb22268d9d4f7563359edca0f78297a2
+Author: Larry Johnson <lrj@acm.org>
+Date: Fri Jan 18 21:49:05 2008 -0500
+
+ ppc4xx: Beautify configuration files for Sequoia and Korat boards
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 30c6a241e88499f536e86d325759e29ba00ff67f
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Feb 15 20:09:01 2008 +0100
+
+ Wipe out assembler warnings while compiling x86 biosemu
+
+ This patch tries to get rid of some assembler warnings about
+ changed .got2 section type while compiling x86 bios emulator
+ code.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Feb 15 00:57:09 2008 +0100
+
+ Prepare v1.3.2-rc1 release candidate
+
+commit f33e9653c9c09868995d788511d573771c209fe5
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Feb 15 00:13:20 2008 +0100
+
+ Fix compile warning on lib_ppc/board.c
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Feb 14 18:22:04 2008 +0100
+
+ Add Radeon Mobility 9200 pci device id to the radeon driver
+
+ This patch extends PCI device id table of the
+ radeon driver so that the driver will also support
+ Radeon Mobility 9200 (M9+) based boards.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 1b8607e1f7143548c6062c28371449ec69588c00
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Feb 14 18:19:50 2008 +0100
+
+ Extend ATI Radeon driver to support more video modes
+
+ Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
+ 800x600, 640x480 at 24, 16 and 8 bpp.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 4124382de029d361162a4b8cecc773eb8f26e2a8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 10 17:05:20 2008 +0100
+
+ xsengine: fix typo and few coding style
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Fri Feb 8 21:25:58 2008 +0100
+
+ Fix wrong memory limit calculation in memory-test
+
+ If the length of the memory address range passed to the "mtest" command is
+ not of the form 2^x - 1, not all address lines are tested. This bug is
+ inherited from the original software at
+ http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
+ this.
+
+ Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Feb 15 00:11:39 2008 +0100
+
+ Coding STyle cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f6921e3dc331293c873ec4d109fd5517a42a90b3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Feb 5 13:30:43 2008 +0900
+
+ sh: Fix register address of SH7722
+
+ The address of SH7722 is wrong by old document.
+ This patch fixes this problem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 17:44:23 2008 -0500
+
+ only update version header as needed
+
+ Constantly rebuilding the version header will force useless relinking, so we
+ simply need to compare the new header with the existing one before updating
+ it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 208447f8e953f347425eb92c8e28d59e6d911363
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Jan 28 05:56:19 2008 -0500
+
+ Do not specify a CROSS_COMPILE default when executing size
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Wed Feb 13 11:19:19 2008 +0100
+
+ Fix return value of mtest when CFG_ALT_MEMTEST set
+
+ Fix a missing return statement from a non-void function.
+
+ Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Jan 9 14:35:26 2008 -0600
+
+ 85xx, 86xx: Determine I2C clock frequencies and store in global_data
+
+ Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
+
+ Update the get_clocks() function in 85xx and 86xx to determine the I2C
+ clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Feb 14 23:18:01 2008 +0100
+
+ TQM834x: clean up configuration
+
+ Get board name consistent with Linux and elsewhere;
+ get rid of local network definitions etc.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 38cc09c55b1d7f233789052c6fc462e5377669a9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Feb 14 08:02:12 2008 +0100
+
+ TFTP: fix search of ':' in BootFile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0bc9efada170096c6b273f19165e32936d330d80
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Feb 14 22:46:55 2008 +0100
+
+ Coding style cleanup; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Feb 14 22:43:22 2008 +0100
+
+ PPC: Use r2 instead of r29 as global data pointer
+
+ R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
+ will refuse to use load/store multiple insns; instead, it issues a
+ list of simple load/store instructions upon function entry and exit,
+ resulting in bigger code size, which in turn makes the build for a
+ few boards fail.
+
+ Use r2 instead.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3c234efa693bc59906c2be55c7918ecbb55392ea
+Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
+Date: Wed Jan 30 09:08:49 2008 +0100
+
+ ARM: make the machid configurable via the environment
+
+ If the variable "machid" exists, let do_bootm_linux use that instead
+ of bd->bi_arch_number.
+
+ Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
+
+commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Wed Jan 23 16:34:46 2008 +0200
+
+ Use #ifdef CONFIG_FSLDMAFEC
+
+ MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
+ fails
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit 26c7bab81e08dc7bd696c48f753428a829629bd8
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Jan 19 10:25:59 2008 +0900
+
+ common/miiphyutil.c: Cleanup MII_DEBUG and debug()
+
+ Current MII_DEBUG is confusing in two ways. One is useless define-then-
+ undef at the top of the file. The other is there is only one debug() in
+ this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
+ While there are many useful printf()/puts() debug codes, but they are for
+ DEBUG, not for MII_DEBUG.
+
+ This patch tries to put them all together into MII_DEBUG and debug().
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 751b9b5189f3274b03c809172631316d6b002c82
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Thu Jan 17 16:43:25 2008 +0900
+
+ OneNAND Initial Program Loader (IPL) support
+
+ This patch enables the OneNAND boot within U-Boot.
+ Before this work, we used another OneNAND IPL called X-Loader based
+ on open source. With this work, we can build the oneboot.bin image
+ without other program.
+
+ The build sequence is simple.
+ First, it compiles the u-boot.bin
+ Second, it compiles OneNAND IPL
+ Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
+ The mechanism is similar with NAND boot except it boots from itself.
+
+ Another thing is that you can only use the OneNAND IPL only to work
+ other bootloader such as RedBoot and so on.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 21f6f9636f0e978397548751347425fbf8d42bb3
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Jan 16 13:06:59 2008 -0600
+
+ Fix CONFIG_MMC usage in fat code
+
+ A #if statement in fat.c depended on CONFIG_MMC, instead of
+ defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
+ as "1" rather than just defined. Now it's better.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Tue Jan 15 12:52:31 2008 +0100
+
+ ppc: Refactor cache routines, so there is only one common set.
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jan 23 15:55:02 2008 -0600
+
+ 86xx: Fix compilation warning in sys_eprom.c
+
+ sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 65230107025733e89e28fd5e5cfd916d4953c28a
+Author: Haavard Skinnemoen <hskinnemoen at>
+Date: Fri Feb 22 11:40:50 2008 +0000
+
+ Move AT91RM9200DK board support under board/atmel
+
+ We already have a vendor subdir for Atmel, so we should use it.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
+
+commit 6d0943a6be99977d6d853d51749e9963d68eb192
+Author: Andreas Engel <andreas.engel@ericsson.com>
+Date: Mon Jan 14 09:06:52 2008 +0000
+
+ ARM: cleanup duplicated exception handlingcode
+
+ Move duplicated exception handling code into lib_arm.
+
+ Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
+
+commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
+Author: Timo Tuunainen <timo.tuunainen@sysart.fi>
+Date: Fri Feb 1 10:09:03 2008 +0000
+
+ Support for Artila M-501 starter kit
+
+ Kimmo Leppala / Sysart and
+ Timo Tuunainen / Sysart
+
+commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
+Author: Stelian Pop <stelian@popies.net>
+Date: Mon Feb 11 10:50:19 2008 +0000
+
+ AT91CAP9 support
+
+ ---------------------------------
+
+ read_dataflash() takes a signed char pointer as a parameter. Silence a
+ few warnings dues to incorrect parameter types in env_dataflash.c.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu Feb 7 09:42:57 2008 +0000
+
+ AT91CAP9 support : move board files to Atmel vendor directory.
+
+ AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 7263ef191b87da94768f762c7093bedeb70db98f
+Author: Stelian Pop <stelian at>
+Date: Thu Jan 3 21:15:56 2008 +0000
+
+ AT91CAP9 support : MACB changes
+
+ Signed-off-by: Stelian Pop <stelian <at> popies.net>
+ Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
+
+commit 6afcabf11d7321850f4feaadfee841488ace54c5
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu Feb 7 16:37:54 2008 +0000
+
+ AT91CAP9 support : board/ files
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
+Author: Stelian Pop <stelian at>
+Date: Wed Jan 30 21:15:54 2008 +0000
+
+ AT91CAP9 support : cpu/ files
+
+ Signed-off-by: Stelian Pop <stelian <at> popies.net>
+
+commit fa506a926cec348805143576c941f8e61b333cc0
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu Jan 31 21:15:53 2008 +0000
+
+ AT91CAP9 support : include/ files
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 20b197c6f2799af399a68f96a1aff543a75621b8
+Author: Stelian Pop <stelian@popies.net>
+Date: Sun Jan 20 19:49:21 2008 +0000
+
+ AT91CAP9 support : build integration
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
+Author: Stelian Pop <stelian@popies.net>
+Date: Sun Jan 20 21:07:00 2008 +0000
+
+ Improve DataFlash CS definition.
+
+ Use a structure instead of the error prone unnamed array to
+ define the possible dataflash banks.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit a6cdd21b56014208706238712a853a9e9a0a2290
+Author: Stelian Pop <stelian@popies.net>
+Date: Sat Jan 19 21:09:35 2008 +0000
+
+ Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
+
+ Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
+
+ cpu/arm926ejs/start.o: In function `cpu_init_crit':
+ .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri Feb 1 16:50:24 2008 +0000
+
+ Fix timer overflow in DaVinci
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri Feb 1 16:49:08 2008 +0000
+
+ Update board NetStar
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit b7f6193e76651e1fd606e46eb11915b53cb6618b
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Tue Feb 5 10:26:42 2008 +0100
+
+ ppc4xx: HCU4/5. Fix make O=../xx
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
+Author: Larry Johnson <lrj@acm.org>
+Date: Tue Jan 22 08:51:59 2008 -0500
+
+ ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit fe891ecf4d187e9d11dde869ed4623af52b54451
+Author: Hiroshi Ito <ito@mlb.co.jp>
+Date: Thu Jan 31 18:35:04 2008 +0900
+
+ NFS Timeout with large files.
+
+ Retry to send NFS packet before reaching timeout.
+
+ Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
+
+commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
+Author: Johannes Stezenbach <js@sig21.net>
+Date: Tue Jan 29 00:11:25 2008 +0100
+
+ Add dependencies to avoid race conditions with parallel make.
+
+ Signed-off-by: Johannes Stezenbach <js@sig21.net>
+
+commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Jan 28 05:46:01 2008 -0500
+
+ Mark board_init_[fr] as noreturn
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 161b2af4d7b48fd602ce333c355a4df0337892bb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Jan 28 05:28:50 2008 -0500
+
+ Only use TEXT_BASE if defined by the board
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1b769881750030f10743808b9d6013e11f559350
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jan 25 07:54:47 2008 +0100
+
+ Fix remaining CONFIG_COMMANDS
+
+ update comments
+ Fix coding style
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Jan 21 16:46:00 2008 +0100
+
+ Add *~ to .gitignore
+
+ One should never add a backup file ending in with ~ to the git repository.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 00:02:10 2008 -0600
+
+ Remove duplicate defines for ARRAY_SIZE
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c77ce474b1c57b13e9d36d9830f147966c143694
+Author: Stelian Pop <stelian@popies.net>
+Date: Mon Jan 14 22:08:14 2008 +0100
+
+ Fix incorrect address test in AT91F_DataflashSelect().
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 13 15:09:58 2008 -0600
+
+ Fix building of fdt_support.c if DEBUG set
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Feb 12 14:53:28 2008 -0600
+
+ Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
+
+ These replace direct structure references for IMMR sections.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit c62776be8dca4097ca03d4f9415f08d4887b45d0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Feb 12 00:45:06 2008 +0100
+
+ Get rid of "#undef DEBUG" from board config files.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Jan 15 17:09:41 2008 -0600
+
+ Remove #undef DEBUG from MPC83xx board header files
+
+ Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
+ The inclusion of this line makes it impossible to enable debug code in
+ other source files, because "#define DEBUG" typically needs to be defined
+ before any header files are included.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 69018ce2e086e9caf35b914d675b82bc4888f077
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 08:25:45 2008 -0600
+
+ QE: Move FDT support into a common file
+
+ Move the flat device tree setup for QE related devices into
+ a common file shared between 83xx & 85xx platforms that have QE's.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Mon Jan 28 10:15:02 2008 +0100
+
+ ADS5121e: DDR2 init/timing update.
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit ac9152830d7fdebace8a260b7737ef2870c21ca0
+Author: John Rigby <jrigby@freescale.com>
+Date: Wed Jan 30 13:36:57 2008 -0700
+
+ Device tree updates
+
+ Changes to match 5121 device tree going mainline in 2.6.25.
+
+ Change OF_SOC from "soc5121" to plain "soc".
+ Remove unneeded "ref-frequency" fixups.
+ Remove "address" enetaddr fixup.
+
+ Add bus-frequency fixup for old OF_SOC so old
+ kernels with old device trees will work with new
+ u-boot with 66MHz IPS clock
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit de55d18df3ff2ea614624e74793de7c43520e0e7
+Author: John Rigby <jrigby@freescale.com>
+Date: Wed Jan 30 13:36:56 2008 -0700
+
+ Change IPS freq to 66MHz
+
+ Recommended frequency is 66MHz
+ Change divider from 4 to 3.
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Jan 14 22:38:55 2008 +0100
+
+ xsengine: rename board_post_init to board_late_init
+
+ missing migration from "Cleanup of some init functions"
+ in c837dcb1a316745092567bfe4fb266d0941884ff
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8dafa87476b0d7170e219c2f5e3842c833a91807
+Author: Larry Johnson <lrj@acm.org>
+Date: Sat Jan 12 23:35:33 2008 -0500
+
+ Add attribute POST_PREREL to ECC memory POST
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 08:25:45 2008 -0600
+
+ QE: Move FDT support into a common file
+
+ Move the flat device tree setup for QE related devices into
+ a common file shared between 83xx & 85xx platforms that have QE's.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d38da537943cd36356b9d3d9d9b60533554b81d8
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Jan 23 17:20:14 2008 +0100
+
+ AVR32: Make SDRAM refresh rate configurable
+
+ The existing code assumes the SDRAM row refresh period should always
+ be 15.6 us. This is not always true, and indeed on the ATNGW100, the
+ refresh rate should really be 7.81 us.
+
+ Add a refresh_period member to struct sdram_info and initialize it
+ properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
+ panic() until the refresh_period member is updated properly.
+
+ Big thanks to Gerhard Berghofer for pointing out this issue.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 61151cccb660cdb06a07fb283de6089913d7bde0
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Apr 19 10:10:11 2007 +0200
+
+ ATSTK1000: Fix potential flash programming bug
+
+ The (now obsolete) atngw100 flash programming code was having problems
+ programming the onboard at49bv642 chip. The atstk1000 flash
+ programming code may have the same bug, so import fix for this problem
+ from the AVR32 Linux BSP.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 22 17:04:13 2007 +0100
+
+ ATSTK1004: Fix comment about default load address
+
+ The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
+ wouldn't have worked anyway since the board can only access 4MB of
+ SDRAM.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 8269ab53608d8db2aa06969c337ab0b0518211e5
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 22 17:01:24 2007 +0100
+
+ ATSTK1002: Use SDRAM + 4MB as default load address
+
+ Many people run into problems when they compile a big kernel and load
+ the uImage at the default SDRAM + 2MB address as the kernel will
+ overwrite the uImage as it is being unpacked. Increase the default
+ load address so that we can load a 4MB kernel image without any
+ problems.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 2bcacc2d841b77f3d2d3910db722003742727e9f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 22 16:51:39 2007 +0100
+
+ ATNGW100: Fix default mtest range
+
+ Let mtest cover the whole SDRAM except the last megabyte, which is
+ where u-boot lives.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Jan 22 15:31:56 2008 +0900
+
+ sh: Fix register address of SH7722.
+
+ The address of SH7722 is wrong by old document.
+ This patch fixes this problem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:57 2008 -0500
+
+ new command for displaying strings at specified memory locations
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:57 2008 -0500
+
+ rewrite/cleanup Blackfin RTC driver
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:57 2008 -0500
+
+ generate u-boot.ldr for Blackfin targets
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b779f7a59530436040f157f7841db7ab796542df
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:57 2008 -0500
+
+ scrub unused symbols
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cc2977acc3bbbb7850f16645dd1081f95335868d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:57 2008 -0500
+
+ move Blackfin cpu object list to respective cpu directories
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:57 2008 -0500
+
+ interface to Blackfin on-chip One-Time-Programmable memory
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:56 2008 -0500
+
+ add support for memory commands with Blackfin L1 instruction memory
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:56 2008 -0500
+
+ use C code rather than inline assembly
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:56 2008 -0500
+
+ add Blackfin-specific reginfo command
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0858b835e7ea501ea084d34cef75932f098342bb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:55 2008 -0500
+
+ add support for Blackfin symbol prefixes to examples
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8dc48d71a4be753ea9f84956cd33600de35fad04
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:55 2008 -0500
+
+ add Blackfin-specific bdinfo command
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:55 2008 -0500
+
+ move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:55 2008 -0500
+
+ unify the Blackfin board targets
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d4d7730853e5d675f76ec666807da3028c91d592
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:55 2008 -0500
+
+ punt Blackfin VDSP headers and import sanitized/auto-generated ones
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:54 2008 -0500
+
+ always pull in asm/blackfin.h for Blackfin ports
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:54 2008 -0500
+
+ add missing __raw versions of Blackfin read/write io functions
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:54 2008 -0500
+
+ add the default Blackfin logo used by Blackfin boards with splash screens
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:54 2008 -0500
+
+ add some more Blackfin docs
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:54 2008 -0500
+
+ make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4087bc88cebec75c432a7fe9f6afb545b0919831
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:54 2008 -0500
+
+ fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b45264ee85cbd92020640a32e02fb434fd557108
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 4 19:26:53 2008 -0500
+
+ add gitignores for Blackfin pieces
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jan 18 01:14:03 2008 +0100
+
+ TFTP: add host ip addr support
+
+ allow to use a different server as set in serverip
+ add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
+ if not defined the max length will be at 128
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e56b4b494cd92def577969f9678395aa22d34c9f
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Jan 9 14:35:26 2008 -0600
+
+ 85xx,86xx: Determine I2C clock frequencies and store in global_data
+
+ Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
+
+ Update the get_clocks() function in 85xx and 86xx to determine the I2C
+ clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Dec 27 10:56:54 2007 +0100
+
+ OMAP5912: fix FIFO handling in UART driver
+
+ According to the OMAP5912 Serial Interfaces Reference Guide (see
+ http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
+ FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
+ changed when the baud clock is not running, i. e. when both DLL and
+ DLH are set to 0.
+
+ Thus make sure that DLL and DLH are 0 when writing the FCR.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Dec 19 15:10:52 2007 +0100
+
+ ARM: S3C24x0 SoC NAND controller support
+
+ This patch adds NAND support to the S3C24x0 SoC code in u-boot
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Dec 19 14:24:40 2007 +0100
+
+ ARM: s3c24xx: Multiple serial port support
+
+ This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit a25f72f1f73a11de68251fb88c89991e202e68fa
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Dec 19 14:16:57 2007 +0100
+
+ ARM: arm920t: Allow use of 'gd' pointer from IRQ
+
+ This patch allows us to use the 'gd' pointer (and thus environment
+ and everything else associated with it) from interrupt context on
+ arm920t.
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit be19bd5cd0f454b63298844a0b5377e029b2caad
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Dec 19 14:19:38 2007 +0100
+
+ ARM: arm920/s3c24xx: IRQ demulitplexer callback
+
+ This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
+ plus a stub implementation of it for the S3C2410.
+
+ The purpose is to allow arm920t implementations such as the s3c24x0 to
+ implement interrupt handlers in u-boot without having to touch core
+ arm920t code.
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
+Author: Hebbar <gururajakr@sanyo.co.in>
+Date: Tue Dec 18 16:03:07 2007 -0800
+
+ ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
+
+ Add ifdef to bdinfo command to display ethernet information
+ only if CONFIG_CMD_NET is defined for arm modules.
+
+ Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
+Author: Hebbar <gururajakr@sanyo.co.in>
+Date: Tue Dec 18 16:00:54 2007 -0800
+
+ ARM: add I2C init function call in lib_arm/board.c
+
+ Adds I2C init func call to init sequence for ARM boards. This is
+ present in ppc,blackfin and other processor init sequence.
+
+ Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Feb 1 09:38:29 2008 +0100
+
+ ppc4xx: Fix ndfc HW ECC byte order
+
+ The current ndfc HW ECC implementation swaps the first two ECC bytes.
+ But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
+ so this swapping in the HW ECC driver is bogus. This patch fixes this
+ problem and now really uses the SMC ECC byte order.
+
+ Thanks to Sean MacLennan for pointing this out.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 30 15:35:50 2008 +0100
+
+ ppc4xx: Fix GPIO configuration for pcs440ep
+
+ The SRD0_PFC0 register was not configured correctly to enable the GPIO's
+ 49-63 for GPIO. They have been configured as trace signals. This patch
+ fixes this by clearing the corresponding bit.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 30 14:48:28 2008 +0100
+
+ ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Fri Dec 7 00:42:32 2007 +0100
+
+ ARM: Board voiceblue update
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Thu Dec 6 23:24:57 2007 +0100
+
+ ARM: AT91RM9200 based boards config cleanup
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+ Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
+ indentation.
+
+commit 481f28b1db5cd21deb55f69399ba240e107af4c7
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Thu Dec 6 22:59:16 2007 +0100
+
+ ARM: Fix at91rm9200dk base address
+
+ Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
+ renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
+ with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
+ However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
+ CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
+ I'm sending this patch 4th (!) time in hope it produces at least some
+ reaction.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+ Fix at91rm9200dk base and environment address.
+
+commit c95219fae2a7add7daa2f91aedca65b1698465c7
+Author: stefano babic <sbabic@denx.de>
+Date: Tue Nov 20 10:40:24 2007 +0100
+
+ MMC for PXA 27X (resubmit)
+
+ MMC support for X_Scale PXA is broken and does not work.
+ Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
+ There were already some patches around the world but none of them was
+ merged into the official u-boot tree.
+
+ This patch makes order fixing this issue. Resubmit after code cleanup.
+
+ Applied and tested on PXA 270 (TrizepsIV module).
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
+Author: stefano babic <sbabic@denx.de>
+Date: Tue Nov 20 10:37:04 2007 +0100
+
+ Fix gcc issues in pxa-regs.h
+
+ Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
+ issues generates wrong code.
+ (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
+ This patch fixes the problem and solves the gcc-4 issues as the linux
+ kernel does.
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+ Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
+
+commit 7047b388876e7b905b2ec4edb8010543e3641b85
+Author: Jens Gehrlein <sew_s@tqs.de>
+Date: Tue Jan 29 08:45:03 2008 +0100
+
+ TQM834x: enable DHCP
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
+Author: Jens Gehrlein <sew_s@tqs.de>
+Date: Tue Jan 29 08:45:02 2008 +0100
+
+ TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8931ab176025b03cfc320b3fd1eca432a88ed560
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sat Jan 26 23:41:19 2008 -0500
+
+ Fix conditional compilation of mpx8xxx_spi driver
+
+ This driver should only compile if CONFIG_MPC8XXX_SPI is set
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 63f732d3d3880feb531f48af247c025bf01462b0
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Tue Jan 29 17:00:34 2008 +0100
+
+ API: Provide dummy halt() in the glue layer.
+
+ This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Tue Jan 29 16:57:38 2008 +0100
+
+ API: Convert conditional building to the new scheme.
+
+ This fixes a build breakage with CONFIG_API enabled, which appeared after
+ the recent changes in the U-Boot build system.
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 98b742489c09780be6a832eeaa4e5eff824792bb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jan 25 09:56:17 2008 +0100
+
+ inka4x0: remove dead code
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jan 23 16:31:06 2008 -0600
+
+ 86xx: Add reginfo command
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit ddcebcb638715a6278da93b553d5016f99823816
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jan 23 16:31:05 2008 -0600
+
+ 86xx: Add print_laws function to fsl_law.c
+
+ This can be used for debug, and will be used by board code
+ to help implement reginfo.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jan 23 16:31:04 2008 -0600
+
+ 86xx: Remove old-style law setup code
+
+ This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 713d8186649dae874613d495b0cecaa039a98b30
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jan 23 16:31:03 2008 -0600
+
+ 86xx: Convert sbc8641d to use new law setup code.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 031976f6364b93833e989f57e9f1e023e0be8c4c
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jan 23 16:31:02 2008 -0600
+
+ 86xx: Convert mpc8610hpcd to new law setup method.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 4933b91f8a49e436681f163df3173beb91cac44a
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jan 23 16:31:01 2008 -0600
+
+ 86xx: Support new law setup method and convert mpc8641
+
+ Adds the support code in cpu/mpc86xx for the new law setup code
+ recently created fsl_law.c, and changes the MPC8641HPCN config
+ to use this code.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jan 23 16:31:00 2008 -0600
+
+ 86xx: Rearrange the sequence in start.S
+
+ * split the BAT initialization so that only 2 BATs (for the boot page
+ and stack) are programmed very early on. The rest are initialized later.
+ * Move other BAT setup, ccsrbar setup, and law setup later in the code
+ after translation has been enabled.
+
+ These changes will facilitate the moving of law and BAT initialization
+ to C code, and will aid with 36-bit physical addressing support.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 23 14:41:37 2008 +0100
+
+ Coding Style Cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 23 14:31:17 2008 +0100
+
+ Coding Style Cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
Author: Dave Liu <r63238@freescale.com>
Date: Fri Jan 18 10:07:04 2008 +0800
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Apr 14 17:11:49 2007 +0200
+
+ AVR32: ATNGW100 board support
+
+ Add support for the ATNGW100 Network Gateway reference design,
+ including flash, ethernet and MMC support.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit e006927a0b9a54e8ee7685d8ac748aaad6801862
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Nov 24 18:15:31 2007 +0100
+
+ AVR32: Initialize ipaddr, loadaddr and bootfile at startup
+
+ I don't know why the relevant layers can't do this by itself, but this
+ is what ppc does.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 799891ef7b1b3432032ec23466df6b665a797fa4
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Fri Jan 18 00:04:28 2008 +0100
+
+ Add AcTux board support
+
+ Hi,
+
+ The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
+ files that
+ contain changes for multiple boards, the board-specific files follow as
+ separate patches.
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+
+commit 66a4344a4d910a11125df7768899ad529719855e
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Wed Jan 16 19:53:23 2008 +0100
+
+ add AcTux-4 board support
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+
+commit bc24345e4101a5c996d6b48ce497b09c53025dc6
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Wed Jan 16 19:51:55 2008 +0100
+
+ add AcTux-3 board support
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+
+commit aebf00fc4d1343b24715373893f7b20bf462d1e9
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Wed Jan 16 19:51:14 2008 +0100
+
+ add AcTux-2 board support
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+
+commit ea99e8f05b7240fd657739e286664664ae160abe
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Wed Jan 16 19:50:37 2008 +0100
+
+ add AcTux-1 board support
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+
+commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Jan 14 19:20:08 2008 +0100
+
+ ARM: remove useless function board_post_init
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 96bd462942022e4569b582c072a0ed26de1cd19b
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Thu Jan 10 14:59:46 2008 +0100
+
+ IXP: enable RTS
+
+ enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
+ No handshaking is done, but the active RTS signal allows to
+ connect to the target using a PC which is using RTS/CTS
+ handshake, and does no harm if the PC is set to ignore RTS.
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+
+commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Jan 7 08:41:34 2008 +0100
+
+ IXP: add dynamic microcode addr
+
+ allow to load the microde from flash or ram by download it through
+ the serial or other.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Sat Nov 10 15:44:12 2007 +0100
+
+ load ixp42x NPE firmware from separate flash block, remove dead code
+
+ Hi,
+
+ the following patch adds support to move the IXP42X NPE firmware to a
+ separate flash block, whose start address is defined in
+ CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
+ NPE-enabled u-boot without copyright problems due to the NPE firmware.
+
+ I hope the patch applies, I get whitespace-related differences in the NPE
+ files due to trailing whitespace in the original versions.
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Date: Tue Jan 15 14:15:46 2008 -0600
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Jan 17 18:07:32 2008 +0900
+
+ sh: Remove CONFIG_COMMANDS from MS7720SE config file
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
commit 055606bd25e88c0cd04ad348a679a04b1b616bee
Author: Niklaus Giger <niklaus.giger@netstal.com>
Date: Wed Jan 16 18:39:20 2008 +0100
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+commit ac331da07db3860f11fa1d0fd3db7c810bce1198
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Jan 17 15:53:52 2008 +0900
+
+ sh: Update SuperH SCIF driver
+
+ This patch fixed wrong SH7720 CPU macro and changed macro that
+ calculated value of SCBRR register.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
Author: Grzegorz Bernacki <gjb@semihalf.com>
Date: Wed Jan 16 15:12:47 2008 +0100
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+commit bed8ce838a609aaab136d43b25e6df2a520bc854
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 22 15:03:12 2007 +0100
+
+ qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0764c164fed6277d359cf132d55187ea34290114
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Wed Jan 16 19:27:51 2008 +0200
+
+ MIPS:Target support for qemu -M mips
+
+ With serial, NE2000, IDE support. Tested in big-endian mode.
+ Memory size hard-coded to 128M for now, so don't play with
+ the -m option.
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Fri Jan 11 00:01:37 2008 +0100
projects / karo-tx-uboot.git / blobdiff