+======================================================================
+Changes since U-Boot 1.0.0:
+======================================================================
+
+* Patch by Xue Ligong (Joe), 13 Nov 2003:
+ add Realtek 8019 ethernet driver
+
+* Patch by Yuli Barcohen, 13 Nov 2003:
+ MPC826xADS/PQ2FADS cleanup
+
+* Patch by Anders Larsen, 12 Nov 2003:
+ Update README to mark the PORTIO commands non-standard
+
+* Patch by Nicolas Lacressonnière, 12 Nov 2003:
+ update for for Atmel AT91RM9200DK development kit:
+ - support for environment variables in DataFlash
+ - Atmel DataFlash AT45DB1282 support
+
+* Patch by Jeff Carr, 11 Nov 2003:
+ add support for new version of 8270 processors
+
+* Patches by George G. Davis, 05 Nov 2003:
+ - only pass the ARM linux initrd tag to the kernel when an initrd
+ is actually present
+ - update omap1510inn configuration file
+
+* Patches by Stephan Linz, 3 Nov 2003:
+ - more endianess fixes for LAN91C111 driver
+ - CFG_HZ configuration patch for NIOS Cyclone board
+
+* Patch by Stephan Linz, 28 Oct 2003:
+ fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
+
+* Patch by Steven Scholz, 20 Oct 2003:
+ - make "mii info <addr>" show infor for PHY at "addr" only
+ - Endian fix for miiphy_info()
+
+* Patch by Gleb Natapov, 19 Sep 2003:
+ Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
+
+* Patch by Anders Larsen, 17 Sep 2003:
+ Bring ARM memory layout in sync with the documentation:
+ stack and malloc-heap are now located _below_ the U-Boot code
+
+* Accelerate booting on TRAB board: read and check autoupdate image
+ headers first instead of always reading the whole images.
+
+* Fix type in MPC5XXX code (pointed out by Victor Wren)
+
+* Enabled password check on RMU board
+
+* Fix configuration problem with IceCube in LOWBOOT configuration:
+ envrionment got embedded, corrupting the image layout.
+
+* Fix NEC display names (it's 6440 [for 640x480], not 6640).
+
+* Added BMS2003 board
+ add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
+
+* Fix flash driver for TRAB board (must use Unlock Bypass Reset
+ command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
+ and CPLD
+
+* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
+ recent tools
+
+* Add checksum verification to 'imls' command
+
+* Add bd_info fields needed for 4xx Linux I2C driver
+
+* Patch by Martin Krause, 4 Nov. 2003:
+ Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
+
+* Print used network interface when CONFIG_NET_MULTI is set
+
+* Patch by Bernhard Kuhn, 28 Oct 2003:
+ Add low boot support for MPC5200
+
+* Fix problem with dual PCMCIA support (NSCU)
+
+* Fix MPC5200 I2C initialization function
+
======================================================================
Changes for U-Boot 1.0.0:
======================================================================
-* Add auto-update code for TRAB board using USB memory sticks
+* Fix parameter passing to standalone images with bootm command
+
+* Patch by Kyle Harris, 30 Oct 2003:
+ Fix build errors for ixdp425 board
+
+* Patch by David M. Horn, 29 Oct 2003:
+ Fixes to build under CYGWIN
+
+* Get IceCube MGT5100 working (again)
+
+* Fix problems in memory test on some boards (which was not
+ non-destructive as intended)
+
+* Patch by Gary Jennejohn, 28 Oct 2003:
+ Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
+ to prevent stack overflow on ARM systems
+
+* Patch by Stephan Linz, 28 Oct 2003:
+ fix init sequence error for NIOS port
+
+* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
+
+* Add CONFIG_VERSION_VARIABLE to TRAB configuration
+
+* Patch by Xiao Xianghua, 23 Oct 2003:
+ small patch for mpc85xx
+
+* Fix small problem in MPC5200 I2C driver
+
+* Fix FCC3 support on ATC board
+
+* Correct header printing for multi-image files in do_bootm()
+
+* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
+
+* Fix PCI problems on PPChameleon board
+
+* Patch by Steven Scholz, 18 Oct 2003:
+ Fix AT91RM9200 ethernet driver
+
+* Patch by Nye Liu, 17 Oct 2003:
+ Fix typo in include/mpc8xx.h
+
+* Patch by Richard Woodruff, 16 Oct 03:
+ Fixes for cpu/arm925/interrupt.c
+ - Initialize timestamp & lastdec vars.
+ - fix timestamp overflows.
+ - fix lastdec overflow.
+ - smarter normalization to allow udelay() below 1ms to work.
+
+* Patch by Scott McNutt, 16 Oct
+ add networking support for the Altera Nios Development Kit,
+ Cyclone Edition (DK-1C20)
+
+* Patch by Jon Diekema, 14 Oct 2003:
+ add hint about doc/README.silent to README file
+
+* Add CompactFlash support for NSCU
+
+* Fix PCI problems on PPChameleonEVB
+
+* TRAB auto-update: Base decision if we have to strip the image
+ header on image type as encoded in the header
+ (include image type patch by Martin Krause, 17 Oct 2003)
+
+* Patches by Xianghua Xiao, 15 Oct 2003:
+
+ - Added Motorola CPU 8540/8560 support (cpu/85xx)
+ - Added Motorola MPC8540ADS board support (board/mpc8540ads)
+ - Added Motorola MPC8560ADS board support (board/mpc8560ads)
+
+* Fix flash timings on TRAB board
+
+* Make sure HUSH is initialized for running auto-update scripts
+
+* Make 5200 reset command _really_ reset the board, without running
+ any other code after it
+
+* Fix errors with flash erase when range spans across banks
+ that are mapped in reverse order
+
+* Fix flash mapping and display on P3G4 board
+
+* Patch by Kyle Harris, 15 Jul 2003:
+ - add support for Intel IXP425 CPU
+ - add support for IXDP425 eval board
+
+* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
+ for more information
+
+* Patch by Steven Scholz, 10 Oct 2003
+ - Add support for Altera FPGA ACEX1K
+
+* Patches by Thomas Lange, 09 Oct 2003:
+ - fix cmd_ide.c for non ppc boards (read/write functions did not
+ add ATA base address)
+ - fix for shannon board
+ - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
+ - Endian swap ATA identity for all big endian CPUs, not just PPC
+ - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
+ args to linux
+ - add support for dbau1x00 board (MIPS32)
+
+* Patch by Sangmoon Kim, 07 Oct 2003:
+ add support for debris board
+
+* Patch by Martin Krause, 09 Oct 2003:
+ Fixes for TRAB board
+ - /board/trab/rs485.c: correct baudrate
+ - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
+ udelay(); fix some timing problems with adc controller
+ - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
+ modify commands: touch and buzzer
+
+* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
+ (quick & dirty workaround for rogue pointer problem in get_vfatname());
+ Use direct function calls for auto_update instead of hush commands
+
+* Patch by Scott McNutt, 04 Oct 2003:
+ - add support for Altera Nios-32 CPU
+ - add support for Nios Cyclone Development Kit (DK-1C20)
+
+* Patch by Steven Scholz, 29 Sep 2003:
+ - A second parameter for bootm overwrites the load address for
+ "Standalone Application" images.
+ - bootm sets environment variable "filesize" to the resulting
+ (uncompressed) data length for "Standalone Application" images
+ when autostart is set to "no". Now you can do something like
+ if bootm $fpgadata $some_free_ram ; then
+ fpga load 0 $some_free_ram $filesize
+ fi
+
+* Patch by Denis Peter, 25 Sept 2003:
+ add support for the MIP405 Rev. C board
+
+* Patch by Yuli Barcohen, 25 Sep 2003:
+ add support for Zephyr Engineering ZPC.1900 board
+
+* Patch by Anders Larsen, 23 Sep 2003:
+ add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
+ implemented for the x86 architecture)
+
+* Patch by Sangmoon Kim, 23 Sep 2003:
+ fix pll_pci_to_mem_multiplier table for MPC8245
+
+* Patch by Anders Larsen, 22 Sep 2003:
+ enable timed autoboot on PXA
+
+* Patch by David Müller, 22 Sep 2003:
+ - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
+ returns correct libgcc file path
+ - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
+ time on s3c24x0 systems
+
+* Patch by Jon Diekema, 19 Sep 2003:
+ - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
+ link state to the fault LED.
+ - In NetLoop, make the Fault LED reflect the link status. The link
+ status gets updated on entry, and on timeouts.
+
+* Patch by Anders Larsen, 18 Sep 2003:
+ allow mkimage to build and run on Cygwin-hosted systems
+
+* Patch by Frank Müller, 18 Sep 2003:
+ use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
+ cpu/mpc8xx/fec.c
+
+* Patch by Pantelis Antoniou, 16 Sep 2003:
+ add tool to compute fileds in the PLPRCR register for MPC86x
+
+* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
+
+* Fix build problems under FreeBSD
+
+* Add generic filesystem image type
+
+* Make fatload set filesize environment variable
+
+* enable basic / medium / high-end configurations for PPChameleonEVB
+ board; fix NAND code
+
+* enable TFTP client code to specify to the server the desired
+ timeout value (see RFC-2349)
+
+* Improve SDRAM setup for TRAB board
+
+* Suppress all output with splashscreen configured only if "splashimage"
+ is set
+
+* Fix problems with I2C support for mpc5200
+
+* Adapt TRAB configuration and auto_update to new memory layout
+
+* Add configuration for wtk board
+
+* Add support for the Sharp LQ065T9DR51U LCD display
+
+* Patch by Rune Torgersen, 17 Sep 2003:
+ - Fixes for MPC8266 default config
+ - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
+
+* Patches by Jon Diekema, 17 Sep 2003:
+ - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
+ env_common.c)
+ - sbc8260 tweaks
+ - adjust "help" output
+
+* Patches by Anders Larsen, 17 Sep 2003:
+ - fix spelling errors
+ - set GD_FLG_DEVINIT flag only after device function pointers
+ are valid
+ - Allow CFG_ALT_MEMTEST on systems where address zero isn't
+ writeable
+ - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
+ - trigger watchdog while waiting in serial driver
+
+* Add auto-update code for TRAB board using USB memory sticks,
+ support new configuration with more memory
* disable MPC5200 bus pipelining as workaround for bus contention
Changes for U-Boot 0.4.8:
======================================================================
+* Add I2C and RTC support for RMU board
+
* Patches by Denis Peter, 9 Sep 2003:
add FAT support for IDE, SCSI and USB
projects / karo-tx-uboot.git / blobdiff