+commit 369d0aa9674b65c83f8553b9bcf9d207dc369223
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Feb 18 17:43:59 2009 -0600
+
+ sata_sil3114: fix compiler warning
+
+ judging from other printfs in the same file, it seems ata should be
+ postpended with the interface number, not the address of the global
+ port variable. Fixes this for current u-boot-mpc83xx tree:
+
+ Configuring for MPC8349ITX board...
+ sata_sil3114.c: In function 'sata_bus_softreset':
+ sata_sil3114.c:99: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'
+ sata_sil3114.c:108: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit f5675aa5ceeef30740970ab8ca0c8cbc324945cd
+Author: Ron Madrid <ron_madrid@sbcglobal.net>
+Date: Wed Feb 18 14:30:44 2009 -0800
+
+ Create configuration option for restricted ns16550 functions
+
+ This patch will create a configuration option for a minimum configuration for
+ the ns16550 serial driver at drivers/serial/ns16550.c and will apply this new
+ configuration option to the SIMPC8313.h config file in order to fix the NAND
+ bootstrap build error. This option will exclude all functions with exception of
+ NS16550_putc and NS16550_init. This will be used primarily to save space and
+ remove unused code from builds in which space is limited.
+
+ Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
+
+commit 7b0bc0219db8981613259473cf19699ac259b4fb
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Feb 18 16:14:29 2009 -0600
+
+ mkconfig: include board config.h before asm/config.h
+
+ swapping the include order suppresses warnings for board configs
+ that define their own CONFIG_MAX_MEM_MAPPED:
+
+ In file included from /home/r1aaha/git/u-boot/include/config.h:5,
+ from /home/r1aaha/git/u-boot/include/common.h:35,
+ from simpc8313.c:26:
+ /home/r1aaha/git/u-boot/include/configs/SIMPC8313.h:81:1: warning:
+ "CONFIG_MAX_MEM_MAPPED" redefined
+ In file included from /home/r1aaha/git/u-boot/include/config.h:4,
+ from /home/r1aaha/git/u-boot/include/common.h:35,
+ from simpc8313.c:26:
+ /home/r1aaha/git/u-boot/include/asm/config.h:28:1: warning: this is
+ the location of the previous definition
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b8845abdc0dcf20d0944e965153f5ae7a9c3077c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Feb 18 21:35:38 2009 +0100
+
+ Fix build errors after making flash_get_info() non-static
+
+ Fix for these build problems:
+ error: static declaration of 'flash_get_info' follows non-static declaration
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5f0320108870e5d62983d1d5c13a2a087dddf686
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 1 17:07:52 2009 +0100
+
+ common/console: avoid ifdef CONFIG_CONSOLE_MUX when it's possible
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ec6f14994602276660f7264c6ab3b91ef1f7614d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 1 17:07:51 2009 +0100
+
+ common/console: coding style cleanup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit daaf74f176b548dfd34a9990231f4189201d57ba
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jan 29 20:02:23 2009 -0500
+
+ mpc8xx_pcmcia: move CONFIG_8xx out of .c file and into Makefile
+
+ Move the CONFIG_8xx mpc8xx_pcmcia.c protection out of the C file and
+ into the Makefile so we avoid pointless compiling of the file.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7bd2722e890bc877a3c057d7ccddc80451c99939
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jan 29 20:02:07 2009 -0500
+
+ disk: convert part_* files to COBJ-$(CONFIG_XXX) style
+
+ Move the CONFIG_XXX out of the part_XXX.c file and into Makefile to
+ avoid pointless compiles.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f05fa9205e04986176dc7ab8b710bcb5fbe9f338
+Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
+Date: Thu Jan 29 10:35:40 2009 +0200
+
+ include/image.h: Ease grepping of image_* functions
+
+ Because the functions have been defined using macros, grepping for
+ their definitions is not possible. This patch adds the real function
+ names in comments.
+
+ Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
+ Acked-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bdab39d358e63aa47f400a8a76b8d5f283842df3
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Jan 28 19:08:14 2009 -0500
+
+ rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
+
+ The CONFIG_CMD_ENV option controls enablement of the `saveenv` command
+ rather than a generic "env" command, or anything else related to the
+ environment. So, let's make sure the define is named accordingly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8b0592b89e0f9f81c9e150c81d96f8a43e4d6101
+Author: Valeriy Glushkov <gvv@lstec.com>
+Date: Fri Jan 23 20:02:17 2009 +0200
+
+ disable imls command if no flash is defined
+
+ Default CONFIG_CMD_IMLS must be disabled when CONFIG_SYS_NO_FLASH is defined
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+
+commit 923aa48126259c13de95131203f1d28bfa5cb889
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jan 23 13:27:18 2009 +0100
+
+ API: Improve glue mid-layer of the API demo application.
+
+ - Extend ub_dev_read() and ub_dev_recv() so they return the length actually
+ read, which allows for better control and error handling (this introduces
+ additional error code API_ESYSC returned by the glue mid-layer).
+
+ - Clean up definitions naming and usage.
+
+ - Other minor cosmetics.
+
+ Note these changes do not touch the API proper, so the interface between
+ U-Boot and standalone applications remains unchanged.
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 44a94e596ba0f6d0951b165403c520bf55b1c56f
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jan 23 13:27:17 2009 +0100
+
+ API: Only output test data when reading was successful.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+
+commit 7fb6c4f9b06c5539043c8bfc6565710b8090841d
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jan 23 13:27:16 2009 +0100
+
+ API: Provide syscall entry point for the ARM architecture.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit b84d7d8f1e1066f810866304a16a3583f88e7c98
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jan 23 13:27:15 2009 +0100
+
+ API: Use stack pointer as API signature search hint in the glue layer.
+
+ De-hardcode range in RAM we search for the API signature. Instead use the stack
+ pointer as a hint to narrow down the range in which the signature could reside
+ (it is malloc'ed on the U-Boot heap, and is hoped to remain in some proximity
+ from stack area). Adjust PowerPC code in API demo to the new scheme.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 86b4bafdfaf669ede8fd99044abc7e27ea29b4f5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Feb 17 10:26:38 2009 +0100
+
+ TQM8260: fix locations of kernel and ramdisk images in flash
+
+ After introducing redundant environment the kernel images was
+ overlapping with environment.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e1ac387f4645499746856adc1aeaa9787da2eca6
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 16:50:14 2008 -0500
+
+ 83xx: Add eSDHC support on 8379 EMDS board
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 80522dc8369a89938369fbcee572e662373bc9a3
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 16:51:33 2008 -0500
+
+ 85xx: Add eSDHC support for 8536 DS
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 50586ef24ed5caf6ce5591df76f355009da2cd79
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 16:47:16 2008 -0500
+
+ Add support for the Freescale eSDHC found on 8379 and 8536 SoCs
+
+ This uses the new MMC framework
+
+ Some contributions by Dave Liu <daveliu@freescale.com>
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 272cc70b211e945e4413122aa73868f6ada732a5
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 16:41:01 2008 -0500
+
+ Add MMC Framework
+
+ Here's a new framework (based roughly off the linux one) for managing
+ MMC controllers. It handles all of the standard SD/MMC transactions,
+ leaving the host drivers to implement only what is necessary to
+ deal with their specific hardware.
+
+ This also hooks the infrastructure into the PowerPC board code
+ (similar to how the ethernet infrastructure now hooks in)
+
+ Some of this code was contributed by Dave Liu <daveliu@freescale.com>
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 1de97f9856f697380cc504126ab92561ed238803
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 16:31:39 2008 -0500
+
+ Eliminated arch-specific mmc header requirement
+
+ The current MMC infrastructure relies on the existence of an
+ arch-specific header file. This isn't necessary, and a couple
+ drivers were forced to implement dummy files to meet this requirement.
+ Instead, we move the stuff in those header files into a more appropriate
+ place, and eliminate the stubs and the #include of asm/arch/mmc.h
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit abb5466ccf4ce50f412d459586f4f4b81cb73ac3
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 16:21:00 2008 -0500
+
+ Convert mmc_init to mmc_legacy_init
+
+ This is to get it out of the way of incoming MMC framework
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit b2e2ed0233a5ef299361abec4fbdaefb63456eff
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 16:19:25 2008 -0500
+
+ Eliminate support for using MMC as memory
+
+ MMC cards are not memory, so we stop treating them that way.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit e1be0d25ecf494ae81245ca438738ba839d6329b
+Author: Poonam_Aggrwal-b10812 <b10812@freescale.com>
+Date: Sun Jan 4 08:46:38 2009 +0530
+
+ 32bit BUg fix for DDR2 on 8572
+
+ This errata fix is required for 32 bit DDR2 controller on 8572.
+ May also be required for P10XX20XX platforms
+
+ Signed-off-by: Poonam_Agarwal-b10812 <b10812@lc1106.zin33.ap.freescale.net>
+
+commit e0c4fac79d4d74572ddd43f75e7189cecca8d0ad
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Feb 16 09:40:20 2009 -0600
+
+ TQM85xx: Fix a couple warnings in TQM8548 build
+
+ The ecm variable in sdram.c was being declared for all 8548, but only
+ used by specific 8548 boards, so we make that variable require those
+ specific boards, too
+
+ The nand code was using an index "i" into a table, and then re-using "i"
+ to set addresses for each upm. However, then it relied on the old value
+ of i still being there to enable things. Changed the second "i" to "j"
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit cf07a5baece0ecfc5284cfda8a4e68eaf92782f8
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:26 2009 +0100
+
+ MPC85xx: TQM8548: workaround for erratum DDR 19 and 20
+
+ This patch adds the workaround for erratum DDR20 according to MPC8548
+ Device Errata document, Rev. 1: "CKE signal may not function correctly
+ after assertion of HRESET". Furthermore, the bug DDR19 is fixed in
+ processor version 2.1 and the work-around must be removed.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit 080408fdc71706adcb883d22125637c54f6010b1
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:25 2009 +0100
+
+ MPC85xx: TQM8548: use cache for AG and BE variants
+
+ This patch makes accesses to the system memory cachable by removing the
+ caching-inhibited and guarded flags from the relevant TLB entries for
+ the TQM8548_BE and TQM8548_AG modules. FYI, the Freescale MPC85* boards
+ are configured similarly.
+
+ This results in a big averall performace improvement. TFTP downloads,
+ NAND Flash accesses, kernel boots, etc. are much faster.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit dc5f55d636d7bf21ba17758fac4b929ec4c059f2
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:24 2009 +0100
+
+ MPC85xx: TQM8548_AG: add 1 GiB DDR2-SDRAM configuration
+
+ This patch add support for the 1 GiB DDR2-SDRAM on the TQM8548_AG
+ module.
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit 88b0e88d186479349e5a2b771e82775109e10fb4
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:23 2009 +0100
+
+ MPC85xx: TQM8548: fix SDRAM timing for 533 MHz
+
+ According to new TQM8548 timing specification:
+ Refresh Recovery: 34 -> 53 clocks
+ CKE pulse width: 1 -> 3 cycles
+ Window for four activities: 13 -> 14 cycles
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit a865bcdac89278cac4dfc07dec8299403110499d
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:22 2009 +0100
+
+ MPC85xx: TQM8548: add support for the TQM8548_AG module
+
+ The TQM8548_AG is a variant of the TQM8548 module with 1 GiB memory,
+ CAN and without PCI/PCI-X and RTC. U-Boot can be built for this module
+ with "$ make TQM8548_AG_config".
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit ad7ee5d43b0db94079d56521dabca25674f28747
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:21 2009 +0100
+
+ MPC85xx: TQM8548: add support for the TQM8548_BE module
+
+ The TQM8548_BE is a variant of the TQM8548 module with NAND and CAN
+ interface. With NAND support, the image is significantly larger and
+ TEXT_BASE is adjusted accordingly. U-Boot can be built for this
+ module with "$ make TQM8548_BE_config".
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit a318234878c346e673b2ef8dc4b14b338fe7fc2b
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:20 2009 +0100
+
+ MPC85xx: TQM85xx: make standard PCI/PCI-X configurable
+
+ The TQM8548_AG module does not have the standard PCI/PCI-X interface
+ connected but just the PCI Express interface . So far it was not
+ possible to disable it without disabling the complete PCI interface
+ (CONFIG_PCI) including PCI Express.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit 31ca9119c3186cec579b54d2a7a2b361b4d2b7bf
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:19 2009 +0100
+
+ MPC85xx: TQM85xx: fix flash protection for boot loader
+
+ As the reset vector is located at 0xfffffffc, all flash sectors from the
+ beginning of the U-Boot binary to 0xffffffff must be protected. On the
+ TQM8548-AG having small sectors at the end of the flash it happened that
+ the last two sector were not protected and an "erase all" left an
+ un-bootable system behind:
+
+ Bank # 2: CFI conformant FLASH (32 x 16) Size: 32 MB in 270 Sectors
+ AMD Standard command set, Manufacturer ID: 0xEC, Device ID: 0x257E
+ Erase timeout: 8192 ms, write timeout: 1 ms
+
+ FFFA0000 E RO FFFC0000 RO FFFE0000 RO FFFE4000 RO FFFE8000 RO
+ FFFEC000 RO FFFF0000 RO FFFF4000 RO FFFF8000 E FFFFC000
+
+ The same bug seems to be in drivers/mtd/cfi_flash.c:flash_init() and many
+ board BSPs as well.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit a1c8a719262151f97119e76166043ee3da3f97b2
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Feb 6 14:30:40 2009 -0600
+
+ 86xx: Update CPU info output on bootup
+
+ - Update style of 86xx CPU information on boot to more closely
+ match 85xx boards
+ - Fix detection of 8641/8641D
+ - Use strmhz() to display frequencies
+ - Display L1 information
+ - Display L2 cache size
+ - Fixed CPU/SVR version output
+
+ == Before ==
+ Freescale PowerPC
+ CPU:
+ Core: E600 Core 0, Version: 0.2, (0x80040202)
+ System: Unknown, Version: 2.1, (0x80900121)
+ Clocks: CPU:1066 MHz, MPX: 533 MHz, DDR: 266 MHz, LBC: 133 MHz
+ L2: Enabled
+ Board: X-ES XPedite5170 3U VPX SBC
+
+ == After ==
+ CPU: 8641D, Version: 2.1, (0x80900121)
+ Core: E600 Core 0, Version: 2.2, (0x80040202)
+ Clock Configuration:
+ CPU:1066.667 MHz, MPX:533.333 MHz
+ DDR:266.667 MHz (533.333 MT/s data rate), LBC:133.333 MHz
+ L1: D-cache 32 KB enabled
+ I-cache 32 KB enabled
+ L2: 512 KB enabled
+ Board: X-ES XPedite5170 3U VPX SBC
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 22c00f8d7d454d77e759df58415d2d3f3d7e154c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Thu Feb 5 11:25:24 2009 -0600
+
+ 86xx: Update Global Utilities structure
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 4ef630df773e45806d701bf5d25c328778bb4cde
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Thu Feb 5 11:25:25 2009 -0600
+
+ 86xx: Reset update
+
+ Update the 86xx reset sequence to try executing a board-specific reset
+ function. If the board-specific reset is not implemented or does not
+ succeed, then assert #HRESET_REQ. Using #HRESET_REQ is a more standard
+ reset procedure than the previous method and allows all board
+ peripherals to be reset if needed.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit edf0e2524a8c6a3e91c009c496a0aa0ae89cd8ab
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Feb 10 23:53:40 2009 -0600
+
+ fsl-ddr: Allow system to boot if we have more than 4G of memory
+
+ Previously if we >=4G of memory and !CONFIG_PHYS_64BIT we'd report
+ an error and hang. Instead of doing that since DDR is mapped in the
+ lowest priority LAWs we setup the DDR controller and the max amount
+ of memory we report back is what we can map (CONFIG_MAX_MEM_MAPPED)
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 8d949aff38cfb4388cbd73876e77bcd06d601f20
+Author: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+Date: Wed Jan 21 17:17:33 2009 -0600
+
+ mpc85xx: Add support for the P2020
+
+ Added various p2020 processor specific details:
+ * SVR for p2020, p2020E
+ * immap updates for LAWs and DDR on p2020
+ * LAW defines related to p2020
+
+ Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ Signed-off-by: Travis Wheatley <Travis.Wheatley@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit cb69e4de8702e108324e1c40363f30ef6f2e2918
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Feb 10 17:36:15 2009 -0600
+
+ 85xx: print boot header info to distinquish 36-bit addr map on MPC8572 DS
+
+ Added some info that is printed out when we boot to distiquish if we
+ built MPC8572DS_config vs MPC8572DS_36BIT_config since they have
+ different address maps.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit feede8b07013b33fca8dd2a916b3ac86bf4d4c0a
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Dec 5 20:10:22 2008 -0600
+
+ Fixup SGMII PHY ids in the device tree
+
+ The device tree's PHY addresses need to be fixed up if we're using the
+ SGMII Riser Card.
+
+ The 8572, 8536, and 8544 DS boards were modified to call this function.
+
+ Code idea taken from Liu Yu <yu.liu@freescale.com>
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 5dc0cf68f8f101042997d75188081d8526d705ea
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Feb 11 15:10:31 2009 -0600
+
+ Make some minor whitespace changes to eliminate line-wrapping
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 9e56986a2b74d197f51eca70fad7b836b1900c4d
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Feb 11 15:07:24 2009 -0600
+
+ Add eth_get_dev_by_index
+
+ This allows code to iterate through the ethernet devices
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit b67305120aaf268a6140125346678166d14f1f47
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Feb 9 22:03:04 2009 -0600
+
+ 85xx: Fix bug in device tree setup in 36-bit physical confg
+
+ In the 36-bit physical config for MPC8572DS when need the start address
+ of memory and it size to be kept in phys_*_t instead of a ulong since
+ we support >4G of memory in the config and ulong cant represent that.
+ Otherwise we end up seeing the memory node in the device tree reporting
+ back we have memory starting @ 0 and of size 0.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ad97dce18445ff05bf326094e691a01aa95aa8dc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Feb 9 22:03:05 2009 -0600
+
+ 85xx: Fix address map for 36-bit config of MPC8572DS
+
+ When we introduced the 36-bit config of the MPC8572DS board we had the
+ wrong PCI MEM bus address map. Additionally, the change to the address
+ map exposes a small issue in our dummy read on the ULI bus. We need
+ to use the new mapping functions to handle that read properly in the
+ 36-bit config.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f8523cb0815b2d3d2d780b7d49ca614105555f58
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 6 09:56:35 2009 -0600
+
+ 85xx: Fix how we map DDR memory
+
+ Previously we only allowed power-of-two memory sizes and didnt
+ handle >2G of memory. Now we will map up to CONFIG_MAX_MEM_MAPPED
+ and should properly handle any size that we can make in the TLBs
+ we have available to us
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1542fbdeec0d1e2a6df13189df8dcb1ce8802be3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 6 09:56:34 2009 -0600
+
+ fsl-ddr: ignore memctl_intlv_ctl setting if only one DDR controller
+
+ If we only have one controller we can completely ignore how
+ memctl_intlv_ctl is set. Otherwise other levels of code get confused
+ and think we have twice as much memory.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b29dee3c906e9daaf6baf7772d2e15e26b8636b8
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 4 09:35:57 2009 -0600
+
+ 85xx: Format cpu freq printing to handle 8 cores
+
+ Only print 4 cpu freq per line. This way when we have 8 cores its a
+ bit more readable.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9704f9caf53f5cae547d8c5e1ae94aa4e57b160f
+Author: Abraham, Thomas <t-abraham@ti.com>
+Date: Tue Oct 28 16:51:31 2008 +0530
+
+ USB: Remove LUN number from CDB
+
+ The LUN number is not part of the Command Descriptor Block (CDB) for scsi inquiry, request sense, test unit ready, read capacity and read10 commands. This patch removes the LUN number information from the CDB.
+
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit f3c0de636252f3a18654c8f9c6370a9574a7e755
+Author: Atin Malaviya <atin.malaviya@gmail.com>
+Date: Tue Feb 3 15:17:10 2009 -0500
+
+ Added usbtty_configured() check. Fixed attribute(packed) warnings.
+
+ V3: Fixed line-wrap problem due to user error in mail!
+
+ Added usb_configured() checks in usbtty_puts() and usbtty_putc() to get around a hang
+ when usb is not connected and the user has set up multi-io (setenv stdout serial,usbtty etc).
+ Got rid of redundant __attribute__((packed)) directives that were causing warnings from gcc.
+
+ Signed-off-by: Atin Malaviya <atin.malaviya@gmail.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit e7de18afe8ecf96a51ef981d06066eeb6b1254e7
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Fri Feb 13 09:23:36 2009 +0100
+
+ i.MX31: Start the I2C clock on driver initialisation
+
+ i.MX31 powers on with most clocks running, so, after a power on this explicit
+ clock start up is not required. However, as Linux boots it disables most clocks
+ to save power. This includes the I2C clock. If we then soft reboot from Linux
+ the I2C clock stays off. This breaks the phycore, which has its environment in
+ I2C EEPROM. Fix the problem by explicitly starting the clock in I2C driver
+ initialisation routine.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Ack-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 15208ac9eae1c340c4bc11f70cbf5c9da78a57ba
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 20:36:14 2009 -0500
+
+ i2c.h: drop i2c_reg_{read, write} hack for Blackfin parts
+
+ The Blackfin i2c driver has been rewritten thus the special ifdefs in the
+ common code are no longer needed.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c2d9befa0b4695b89476fb5d259742c09afe243f
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Feb 12 08:08:54 2009 +0100
+
+ 82xx, mgcoge: fix compile error
+
+ With actual u-boot compiling the mgcoge port fails, because
+ since commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56 it is
+ necessary to define CONFIG_NET_MULTI.
+
+ Seems to me the mgcoge port is the only actual existing 8260
+ port who uses CONFIG_ETHER_ON_SCC, so no other 8260 port needed
+ to be fixed.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 9cacf4fc4035eabe9d9ae2a9a188c51a8027c91e
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Mon Feb 9 08:18:34 2009 +0100
+
+ ppc4xx: Add README entry for CONFIG_PCI_DISABLE_PCIE
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7369f0e384e2a831be13a7773a58242c9173fa9c
+Author: Carolyn Smith <carolyn.smith@tektronix.com>
+Date: Thu Feb 12 06:13:44 2009 +0100
+
+ ppc4xx: Fix initialization of the SDRAM_CODT register
+
+ This fixes the initialization of the SDRAM_CODT register in the ppc4xx DDR2
+ initialization code. It also removes use of the SDRAM_CODT_FEEDBACK_RCV_SINGLE_END
+ and SDRAM_CODT_FEEDBACK_DRV_SINGLE_END #define's since they are reserved bits.
+
+ Signed-off-by: Carolyn Smith <carolyn.smith@tektronix.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cef0efaf2fa55d1f25066cfb02bd984c27f9ca31
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Feb 11 09:29:33 2009 +0100
+
+ ppc4xx: Fix problem with board_eth_init() vs cpu_eth_init() on AMCC boards
+
+ Some AMCC eval boards do have a board_eth_init() function calling
+ pci_eth_init(). These boards need to call cpu_eth_init() explicitly now
+ with the new eth_init rework.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c645012aefebb301e6907d148c6c8efacac049d4
+Author: Adam Graham <agraham@amcc.com>
+Date: Mon Feb 9 13:18:12 2009 -0800
+
+ ppc4xx: Autocalibration can set RDCC to over aggressive value.
+
+ The criteria of the AMCC SDRAM Controller DDR autocalibration
+ U-Boot code is to pick the largest passing write/read/compare
+ window that also has the smallest SDRAM_RDCC.[RDSS] Read Sample
+ Cycle Select value.
+
+ On some Kilauea boards the DDR autocalibration algorithm can
+ find a large passing write/read/compare window with a small
+ SDRAM_RDCC.[RDSS] aggressive value of Read Sample Cycle Select
+ value "T1 Sample".
+
+ This SDRAM_RDCC.[RDSS] Read Sample Cycle Select value of
+ "T1 Sample" proves to be to aggressive when later on U-Boot
+ relocates into DDR memory and executes.
+
+ The memory traces on the Kilauea board are short so on some
+ Kilauea boards the SDRAM_RDCC.[RDSS] Read Sample Cycle Select
+ value of "T1 Sample" shows up as a potentially valid value for
+ the DDR autocalibratiion algorithm.
+
+ The fix is to define a weak default function which provides
+ the minimum SDRAM_RDCC.[RDSS] Read Sample Cycle Select value
+ to accept for DDR autocalibration. The default will be the
+ "T2 Sample" value. A board developer who has a well defined
+ board and chooses to be more aggressive can always provide
+ their own board specific string function with the more
+ aggressive "T1 Sample" value or stick with the default
+ minimum SDRAM_RDCC.[RDSS] value of "T2".
+
+ Also put in a autocalibration loop fix for case where current
+ write/read/compare passing window size is the same as a prior
+ window size, then in this case choose the write/read/compare
+ result that has the associated smallest RDCC T-Sample value.
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2ede879fcb67470524847bb4fc8972651bb46184
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Feb 11 09:37:12 2009 +0100
+
+ ppc4xx: Fix problem with CONFIG_MAX_MEM_MAPPED in include/asm-ppc/config.h
+
+ CONFIG_SDRAM_PPC4xx_IBM_DDR2 is not set when include/asm-ppc/config.h is
+ included. So for katmai, CONFIG_MAX_MEM_MAPPED will get set to 256MB.
+
+ It makes perfect sense to set CONFIG_MAX_MEM_MAPPED to 2GB for all PPC4xx
+ boards right now.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f15c6515fc23f83c51f3de272ca23d86b80e81b1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Feb 12 00:08:39 2009 +0100
+
+ Coding style cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5fc56b907d993260b9ebdb137af66fe69635ae9e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jan 30 16:36:40 2009 -0600
+
+ Add feature-removal-schedule.txt
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 255d28e1642e8fc32a6753226be1a96b481ce111
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 10 09:32:38 2009 +0100
+
+ 8xx serial, smc: Coding-Style cleanup serial SMC driver
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 2b3f12c214346508cae3f1245808c1ca54c81fdd
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 10 09:31:47 2009 +0100
+
+ 8xx serial, smc: add configurable SMC Rx buffer len
+
+ This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
+ With this option it is possible to allow the receive
+ buffer for the SMC on 8xx to be greater then 1. In case
+ CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
+ old version.
+
+ When defining CONFIG_SYS_SMC_RXBUFLEN also
+ CONFIG_SYS_MAXIDLE must be defined to setup the maximum
+ idle timeout for the SMC.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit e915f8bb73d74178bc21d3a457959883b1afd1c0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Feb 5 21:04:36 2009 -0500
+
+ common/{hush, kgdb, serial}.c: build by COBJS-$(...) in Makefile
+
+ Move global '#ifdef CONFIG_xxx .... #endif' out of the .c files and into
+ the COBJS-$(CONFIG_xxx) in the Makefile. Also delete unused var in kgdb
+ code in the process.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ab76e9848a1f4db64d14233741d739a3b3360c93
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Feb 5 21:04:50 2009 -0500
+
+ bzip2: move ifdef handling to Makefile COBJS-$(...)
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ae0b05df04e1cc65c5ad19ccd362f4be82df7316
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Thu Feb 5 22:18:02 2009 -0500
+
+ Fix whitespace damage: double space changed to a tab
+
+ At some point an intentional double space at the end of the sentence
+ got changed into a tab in the GPL header line:
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+
+ This patch fixes the damage.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 4f975678de995b55749d5e84590c268972a7c835
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 10 09:53:29 2009 +0100
+
+ cfi: make flash_get_info() non static
+
+ If on your board is more than one flash, you must know
+ the size of every single flash, for example, for updating
+ the DTS before booting Linux. So make this function
+ flash_get_info() extern, and you can have all info
+ about your flashes.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 86321fc1128c93a10ac4afb9d317b0df8ece0f9e
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Feb 5 23:58:25 2009 -0800
+
+ net: removed board-specific CONFIGs from MPC5xxx FEC driver
+
+ Added new CONFIG options for the three type of MAC-PHY interconnect and
+ applied them all relevant board config files
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 638ed3e296e70fab286d157b7adedaaa4a09a474
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Feb 5 21:04:47 2009 -0500
+
+ net/sntp.c: move ifdef into Makefile COBJS-$(...)
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9e5be8214ba751436e57c3be044bf6dccb9a6687
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Feb 3 18:26:41 2009 -0600
+
+ tsec: Fix a bug in soft-resetting
+
+ SOFT_RESET must be asserted for at least 3 TX clocks. Usually, that's about 30
+ clock cycles, so it's been mostly working. But we had no guarantee, and at
+ slower bitrates, it's just over a microsecond (over 1000 clock cycles). This
+ enforces a 2 microsecond gap between assertion and deassertion.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 09fcc8b5d86903b76e7e4d1d879d6f4bca25c27b
+Author: Simon Munton <simon@nidoran.m5data.com>
+Date: Mon Feb 2 09:44:08 2009 +0000
+
+ Fix 100Mbs ethernet operation on sh7763 based boards
+
+ 100Mbs ethernet does not work on sh7763 chips due to the wrong value being
+ used in the GECMR register. Following diff fixes the problem
+
+ Signed-off-by: Simon Munton <simon@nidoran.m5data.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2bc2a8f6dc9fdda465317da59474e65c24a398a2
+Author: ksi@koi8.net <ksi@koi8.net>
+Date: Fri Feb 6 16:27:55 2009 -0800
+
+ Fix MPC8260 with ethernet on SCC
+
+ This fixes MPC8260 compilation with ethernet on SCC. Probably was a
+ typo or something...
+
+ Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ae5d8f613cec1a6af7bf1fc9c42a3b856f021023
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Jan 30 12:56:15 2009 +0100
+
+ 82xx serial, smc: Coding-Style cleanup serial SMC driver
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit c92fac91a06c60f874c605e3ca80dd407c1caaa7
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Jan 30 12:55:38 2009 +0100
+
+ 82xx serial, smc: add configurable SMC Rx buffer len
+
+ This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
+ With this option it is possible to allow the receive
+ buffer for the SMC on 82xx to be greater then 1. In case
+ CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
+ old version.
+
+ When defining CONFIG_SYS_SMC_RXBUFLEN also
+ CONFIG_SYS_MAXIDLE must be defined to setup the maximum
+ idle timeout for the SMC.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit bced7ccefa08512c54a6d146658ff7dbc33d5dfe
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 6 08:08:06 2009 -0600
+
+ ppc: Fix roll over bug in flush_cache()
+
+ If we call flush_cache(0xfffff000, 0x1000) it would never
+ terminate the loop since end = 0xffffffff and we'd roll over
+ our counter from 0xfffffe0 to 0 (assuming a 32-byte cache line)
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 87c9063963561d3d01064be34d0c30855a56587b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Feb 5 20:40:58 2009 -0600
+
+ ppc: Move CONFIG_MAX_MEM_MAPPED to common config.h
+
+ Moved CONFIG_MAX_MEM_MAPPED to the asm/config.h so its kept consistent
+ between the two current users (lib_ppc/board.c, 44x SPD DDR2).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 47d41cc3a11a03c6d56146d056145df73f47eb50
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Feb 5 20:40:57 2009 -0600
+
+ Add an architecture specific config.h for common defines
+
+ We have common defines that we duplicate in various ways. Having an
+ arch specific config.h gives us a common location for those defines.
+
+ Eventually we should be able to replace this when we have proper
+ Kconfig support.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4c78d4a6c01621721b732418e1c6da684a56bbb1
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:56 2009 -0600
+
+ mpc8641hpcn: Change PCI MEM pci bus address
+
+ Now that the rest of u-boot can support it, change the PCI bus
+ address of the PCI MEM regions from 0x80000000 to 0xc0000000,
+ and use the same bus address for both PCI1 and PCI2. This will
+ maximize the amount of PCI address space left over to map RAM
+ on systems with large amounts of memory.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 1785dbeed43599eed1d8875673c96912cd770141
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:55 2009 -0600
+
+ drivers/block/ahci: Fix pci mapping bug
+
+ The code assumes that the pci bus address and the virtual
+ address used to access a region are the same, but they might
+ not be. Fix this assumption.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit d591a80e74091e7a0658d165721e6c7de2ef0bcd
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:54 2009 -0600
+
+ MPC8641HPCN: Enable CONFIG_ADDR_MAP
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 49f46f3bf08aaf7b1db131a1082f1e603bb7a94b
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:53 2009 -0600
+
+ mpc8641hpcn: Clean up PCI mapping concepts
+
+ Clean up PCI mapping concepts in the 8641 config - rename _BASE
+ to _BUS, as it's actually a PCI bus address, separate virtual
+ and physical addresses into _VIRT and _PHYS, and use each
+ appopriately.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit c9315e6b4f244981de0b2eaaa29a7838a165b494
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:52 2009 -0600
+
+ mpc86xx: Add support to populate addr map based on BATs
+
+ If CONFIG_ADDR_MAP is enabled, update the address map
+ whenever we write a bat.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit d35ae5a938679bd7e18167faf79d0fb3c6639b51
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:51 2009 -0600
+
+ powerpc: Move duplicated BAT defines to mmu.h
+
+ The BAT fields are architected; there's no need for these to be in
+ cpu-specific files. Drop the duplication and move these to
+ include/asm-ppc/mmu.h. Also, remove the BL_xxx defines that were only
+ used by the alaska board, and switch to using the BATU_BL_xxx defines
+ used by all the other boards. The BL_ defines previously in use
+ had to be shifted into the proper position for use, which was inefficient.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 6e61fae4d360a1380b63e7d007b31477e366bcce
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:50 2009 -0600
+
+ drivers/pci: Create pci_map_bar function
+
+ It is no longer always true that the pci bus address can be
+ used as the virtual address for pci accesses. pci_map_bar()
+ is created to return the virtual address for a pci region.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 2ecca3401775b125c3b9ff65766befb23989414b
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:49 2009 -0600
+
+ mpc8641hpcn: Set up outbound pci windows before inbound
+
+ Because the inbound pci windows are mapped generously, set up
+ the more specific outbound windows first. This way, when we
+ search the pci regions for something, we will hit on the more
+ specific region. This can actually be a problem on systems
+ with large amounts of RAM.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit b81b773ead0687114dc8a800f99ea6e504447739
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Mon Feb 2 16:34:52 2009 -0600
+
+ mpc8641hpcn: Use physical address in flash banks defintion
+
+ If the VA and PA of the flash aren't the same, the banks list
+ should be initialized to hold the physical address. Correct this.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 2d43e873a29ca4959ba6a30fc7fb396d3fd0dccf
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 6 09:49:32 2009 -0600
+
+ pci: give preference to non-PCI_REGION_SYS_MEMORY regions when matching
+
+ When we search for an address match in pci_hose_{phys_to_bus,bus_to_phys}
+ we should give preference to memory regions that aren't system memory.
+
+ Its possible that we have over mapped system memory in the regions and
+ we want to avoid depending on the order of the regions.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ff4e66e93c1ad47644be3b4ffd6a46e1ce9b6612
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 6 09:49:31 2009 -0600
+
+ pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity
+
+ The PCI_REGION_MEMORY and PCI_REGION_MEM are a bit to similar and
+ can be confusing when reading the code.
+
+ Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY to clarify its used
+ for system memory mapping purposes.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8da601280a8acbc3385784780ed35130e53812f1
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Feb 4 13:47:22 2009 -0600
+
+ NAND: Add timeout for reset command
+
+ Without the timeout present an infinite loop can occur if the
+ NAND device is broken or not present.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 10dc6a9bef73d7d4cb25b3fde27ee91f8484b126
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Feb 4 13:39:40 2009 -0600
+
+ NAND: Silence warning when CONFIG_SYS_NAND_QUIET_TEST
+
+ Commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b removed support
+ for disabling the "No NAND device found!!!" warning when
+ CONFIG_SYS_NAND_QUIET_TEST was defined. This re-adds support
+ for silencing the warning.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit ad09ab2e3ac28f304372eceb4a5cb4d24e102a13
+Author: Valeriy Glushkov <gvv@lstec.com>
+Date: Mon Jan 19 16:32:59 2009 +0200
+
+ NAND: Fixed invalid pointers to static relocated chip names
+
+ Dear Wolfgang,
+
+ You are right, the patch was ugly.
+ The new one seems to be better.
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 5a9427dc9b8438759db3f67a1e547062f76eb18d
+Author: derek@siconix.com <derek@siconix.com>
+Date: Mon Jan 26 14:08:17 2009 -0700
+
+ env_nand: fix env memory release
+
+ This fixes a bug that tmp environment memory not being released.
+
+ Signed-off-by: Derek Ou <dou@siconix.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 6989e4f546d960a407dd5425f800dff9751c8132
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Feb 5 09:33:50 2009 -0500
+
+ Coldfire: M527x: Add missing GPIO register address defines
+
+ Add missing GPIO registers address definition for Coldfire M5271.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit c4ff77f5e6c3a01610ce97434c0d59acb1476f95
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 14:42:58 2009 -0500
+
+ Coldfire: mcfmii: Allow non-autonegotiating PHYs to use mii command
+
+ Modified mii_init to support boards with PHYs that are not set to
+ autonegotiate, but still want to use u-boot's mii commands to probe
+ the smi bus. Such PHYs will not set the Autonegotiate-done bit.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 92d3e6e0ffcbb7224c83104f8d87b5b4bf39a38f
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 11:44:30 2009 -0500
+
+ Coldfire: Applied baudrate formula of serial_init to serial_setbrg
+
+ Applied the patch for baudrate divider value truncation for
+ serial_init to serial_setbrg as well.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 8706ef378f2db1ef65b9c2f909561f23e3dc2148
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 14:07:05 2009 -0500
+
+ Coldfire: M5271EVB: Board header update (dependencies)
+
+ Cleanup for M5271EVB:
+ Added clarification on the use of CONFIG_SYS_CLOCK.
+ Modified to use u-boot's HUSH parser.
+ Cleanup on environment settings.
+ Removed compiler warning by defining CONFIG_SYS_CS0_*
+
+ Dependencies:
+ Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier.
+ This depends on a patch to include/asm-m68k/m5271.h
+ that defines the multiplier and divider ratios.
+
+ Removed the definition of CONFIG_SYS_FECI2C.
+ This depends on a patch that removes the use of it in
+ cpu/mcf52x2/cpu_init.c
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit e0db344fabfeb4f9649846f94838f51172f6a1f6
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Jan 29 14:36:06 2009 -0500
+
+ Coldfire: M5271: Allow board header file to specify clock multiplier
+
+ M5271 dynamic clock multiplier. It is currently fixed at 100MHz.
+
+ Allow the board header file to set their own multiplier and divider.
+ Added the #define for the multiplier and divider to the cpu header file.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit d1ef25dd81c79dcfad5c2ff0162b1bea21d04bc3
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 10:47:13 2009 -0500
+
+ Coldfire: M5271EVB: Remove usage of CONFIG_SYS_FECI2C
+
+ Discontinue the use of CONFIG_SYS_FECI2C (only used by M5271EVB).
+ Use read-modify-write to activate the FEC pins without disabling I2C.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit ee73cc59ab904976af3c33b454fc84f78618b2d1
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 09:45:34 2009 -0500
+
+ Coldfire: cmd_bdinfo cleanup
+
+ CONFIG_M68K bdinfo cleanup:
+
+ Fixed compiler warning about baudrate printing.
+ format '%d' expects type 'int', but argument 2 has type 'long unsigned int'.
+
+ Added printing of "cpufreq"
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 4ffc39050aa46ed8a3d29732293dff769e54fffa
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 09:27:00 2009 -0500
+
+ Coldfire: Fix half-baud UART by adding M5271 to Coldfire v2 core list
+
+ Added the CONFIG_M5271 to the list of Coldfire V2 processor. This
+ was causing the bus clock (not CPU clock) to be declared twice as
+ fast as it actually is. This causes UARTS to operate at half the
+ specified baudrate.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 59d1bda7f92c8a28c3aba94e48063749d425949f
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Tue Feb 3 15:15:21 2009 +0100
+
+ ppc4xx: Make PCIE support selectable
+
+ On some platforms PCIE support is not required, but would be included
+ because the cpu supports it. To reduce fooprint it is now configurable
+ via CONFIG_PCI_DISABLE_PCIE.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b129eff5ede394cc1faeb6dbf6a987e91abce552
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Feb 3 22:13:16 2009 +0100
+
+ ppc4xx: Only fixup opb attached UARTs
+
+ This patch updates the fdt UART clock fixup code to
+ only touch CPU internal UARTs on 4xx systems.
+ Only these UARTs are definitely clocked by gd->uart_clk.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4b7e3d045cc82f7f7b6f3a19b54a814da36ac52c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 13 11:00:29 2009 -0500
+
+ Blackfin: move default boot SPI CS to common code
+
+ Move the default SPI CS that we boot from into common code so that it can
+ be used in other SPI drivers and environment settings.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f790ef6ff12381cb0e43de54fb2b0f1204ad8ed6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Dec 10 12:33:54 2008 -0500
+
+ Blackfin: dynamically update UART speed when initializing
+
+ Previously, booting over the UART required the baud rate to be known ahead
+ of time. Using a bit of tricky simple math, we can calculate the new board
+ rate based on the old divisors.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
+
+commit 97f265f14f23050f3cb997f617f3a6917b843ea2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 9 17:21:08 2008 -0500
+
+ Blackfin: add support for fast SPI reads with Boot ROM
+
+ Newer Blackfin boot roms support using the fast SPI read command rather than
+ just the slow one. If the functionality is available, then use it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 67619982bfc5cd62710a48e3cbffc304cb78c341
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:46:52 2008 -0400
+
+ Blackfin: check for reserved settings in DDR MMRs
+
+ Some bits of the DDR MMRs should not be set. If they do, bad things may
+ happen (like random failures or hardware destruction).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 622a8dc0958dd599743348ea94eb10b9d0be8ae6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:54:00 2008 -0400
+
+ Blackfin: set default voltage levels for BF538/BF539 parts
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 09dc6b0bbd1d5e39cdddeebc059f9a75630e4f6f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 1 01:29:57 2008 -0400
+
+ Blackfin: use on-chip syscontrol() rom function when available
+
+ Newer Blackfin's have an on-chip rom with a syscontrol() function that needs
+ to be used to properly program the memory and voltage settings as it will
+ include (possibly critical) factory tested bias values.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e1fb6d0d52fbe3fbc1a4c651dacf11e9c1417f63
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Feb 5 11:44:52 2009 +0100
+
+ cfi_flash: Fix typo in cfi_flash.c
+
+ Patch "flash/cfi_flash: Use virtual sector start address, not phys"
+ introduced a small typo and compilation warning for systems with CFI
+ legacy support (e.g. hcu4). This patch fixes it.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 28745db969b72693754991c838f68a7fb4a8b1ab
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 29 11:21:38 2009 +0100
+
+ jedec_flash: Only use manufacturer defines from common flash.h
+
+ This patch removes the double defined manufacturer defines from
+ jedec_flash.c. Since the common defines in flash.h are 32bit
+ we now need the (16) cast. This patch also removes the compilation
+ warning (e.g. seen on hcu5):
+
+ ./MAKEALL hcu5
+ Configuring for hcu5 board...
+ jedec_flash.c:219: warning: large integer implicitly truncated to unsigned type
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ec21d5cfcb6b4e7fcdd5c6e926e1a824900706f2
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Feb 5 11:25:57 2009 +0100
+
+ cfi_flash: Silence compilation warning
+
+ Patch "flash/cfi_flash: Use virtual sector start address, not phys"
+ introduced a small compilation warning. This patch fixes it.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 09ce9921a7d8b1ce764656b14b42217bbf4faa38
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Mon Feb 2 16:34:51 2009 -0600
+
+ flash/cfi_flash: Use virtual sector start address, not phys
+
+ include/flash.h was commented to say that the address in
+ flash_info->start was a physical address. However, from u-boot's
+ point of view, and looking at most flash code, it makes more
+ sense for this to be a virtual address. So I corrected the
+ comment to indicate that this was a virtual address.
+
+ The only flash driver that was actually treating the address
+ as physical was the mtd/cfi_flash driver. However, this code
+ was using it inconsistently as it actually directly dereferenced
+ the "start" element, while it used map_physmem to get a
+ virtual address in other places. I changed this driver so
+ that the code which initializes the info->start field calls
+ map_physmem to get a virtual address, eliminating the need for
+ further map_physmem calls. The code is now consistent.
+
+ The *only* place a physical address should be used is when defining the
+ flash banks list that is used to initialize the flash_info struct,
+ usually found in the board config file.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 657f2062d8e17ebf4a55f52c9e71c07c0c94c779
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Feb 4 09:42:20 2009 +0100
+
+ Fix compiler warning
+
+ (shows up only when DEBUG is enabled)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 47832cd15ae02fb6fde8ebed5b272f85775f2ceb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:45:55 2008 -0400
+
+ Blackfin: update anomaly lists
+
+ Update the anomaly lists to match latest anomaly sheets.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 70a4da45e16b72e8e5b0baaecdaee9be8619647d
+Author: Ralph Kondziella <rk@argos-messtechnik.de>
+Date: Mon Jan 26 12:34:36 2009 -0700
+
+ ADS5121 Add PATA support
+
+ Original patch from Ralph Kondziella
+ plus clean up by Wolfgang Denk
+ plus changes by John Rigby
+ use ips clock not lpc
+ port forward to current u-boot release
+
+ Signed-off-by: Ralph Kondziella <rk@argos-messtechnik.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit abfbd0ae4967df18102345db4f4b529a13da107b
+Author: Martha Marx <mmarx@silicontkx.com>
+Date: Mon Jan 26 10:45:07 2009 -0700
+
+ ADS5121 Add IC Ident Module (IIM) support
+
+ IIM (IC Identification Module) is the fusebox for the mpc5121.
+ Use #define CONFIG_IIM to turn on the clock for this module
+ use #define CONFIG_CMD_FUSE to add fusebox commands.
+ Fusebox commands include the ability to read
+ the status, read the register cache, override the register cache,
+ program the fuses and sense them.
+
+ Signed-off-by: Martha Marx <mmarx@silicontkx.com>
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 14d19cd1bce9a24b1335598f1568140f4950e4d9
+Author: John Rigby <jrigby@freescale.com>
+Date: Fri Jan 23 10:33:15 2009 -0700
+
+ ADS5121 Fix rev2 silicon pci iopad config
+
+ Reset config is not correct
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 4c154252c480b13f69ce1b71a9530b0515da76a6
+Author: John Rigby <jrigby@freescale.com>
+Date: Wed Nov 19 13:57:34 2008 -0700
+
+ ADS5121 DIU Add diu_bmp_addr env
+
+ Add support for using a bmp other than
+ FSL_Logo_BMP for the DIU splash screen.
+
+ Can now set the env var "diu_bmp_addr" to
+ the address of a BMP in flash to use instead
+ of the default FSL_Logo_BMP.
+
+ Signed-off-by: Martha Marx <mmarx@silicontkx.com>
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 92c20fbd3a7788c1a154f50a3f44f28a7763f99a
+Author: John Rigby <jrigby@freescale.com>
+Date: Thu Oct 30 16:39:35 2008 -0600
+
+ ADS5121 DIU Make inclusion of FSL logo optional
+
+ Make inclusion of FSL logo optional and
+ turn it off by default.
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit bd99ec149abe94e7f6b2bda4766d701b4005053f
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Sun Feb 1 12:27:53 2009 +0100
+
+ Compile warning fix in onenand_uboot.h
+
+ Regression since merge window after 2009.01
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit a270d1e7295c3d829f42c0480117941dfc1c6477
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 29 06:33:55 2009 +0100
+
+ USB: Add EHCI support for VCT EHCI controller (really with driver now)
+
+ Somehow I missed the real driver part in my last patch version. This patch
+ now adds the driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 716ebf436c9e43df6740e0172f6b2a81ddbf1b8e
+Author: Cliff Cai <cliff.cai@analog.com>
+Date: Sat Nov 29 18:22:38 2008 -0500
+
+ Blackfin: add driver for on-chip MMC/SD controller
+
+ This is a port of the Linux Blackfin on-chip SDH driver to U-Boot.
+
+ Signed-off-by: Cliff Cai <cliff.cai@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6e87ea0ca951465eba144ab2e6dba6fb507737a2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:47:34 2008 -0400
+
+ Blackfin: add port muxing for BF51x SPI
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fc68f9f85959664d528daea2aef5ef54974331ce
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 6 06:16:19 2009 -0500
+
+ Blackfin: output booting source when booting
+
+ Knowing the booting source of the part is useful, especially when the part
+ can switch dynamically between sources.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8df3ce0f49c37947800ac7c84e751499882619fc
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 11 06:30:46 2008 -0500
+
+ Blackfin: set default CONFIG_ENV_SPI_CS based on bootrom
+
+ Set the default CONFIG_ENV_SPI_CS value to match the SPI CS that is used by
+ the Blackfin on-chip bootrom to boot out of SPI flash.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2b4a486e6fac502d8b883e344cc4012283945b3d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 11 04:06:26 2008 -0500
+
+ Blackfin: update asm-blackfin/posix_types.h to latest Linux version
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e5eb93e77391bcc308697116c544ea1340aaae8a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Dec 6 02:54:52 2008 -0500
+
+ Blackfin: add port I bits
+
+ Some people need to access port I, so make sure the pins are defined.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8a6b272596d43de0db4943eac7af58c3534c4026
+Author: Sonic Zhang <Sonic.Zhang@analog.com>
+Date: Wed Nov 26 22:16:45 2008 -0500
+
+ Blackfin: add driver for on-chip ATAPI controller
+
+ This is a port of the Linux Blackfin on-chip ATAPI driver to U-Boot.
+
+ Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit be9d8c780e6831cb84b7d4590ceae03dca8fc10b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 26 21:43:06 2008 -0500
+
+ Blackfin: add driver for on-chip NAND controller
+
+ This is a port of the Linux Blackfin on-chip NFC driver to U-Boot.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4148e02abae9a099f4444b5e168ebc2b911d2295
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 12 07:18:15 2008 -0500
+
+ Blackfin: build with -mno-fdpic
+
+ Use the -mno-fdpic flag so that any Blackfin toolchain can be used to build
+ up u-boot, including ones that output FDPIC ELF by default.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 70e95589a24a2d83ad00317e4a9611d0211ecb58
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Nov 11 05:43:57 2008 -0500
+
+ Blackfin: fix up EBIU defines
+
+ The EBIU defines for EBSZ 256/512 were incorrect.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 961954ea0ec8dc4341034c1a1ff3107ec0527809
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 5 12:45:24 2008 -0500
+
+ Blackfin: use 8/16/32 bit transfer widths in dma_memcpy()
+
+ Rather than using 8bit transfers for everything, use 8/16/32 bit transfers
+ as usable with the source/destination addresses and the count size.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b93c68648426f906d63b98117496b6415f505f39
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 5 08:50:23 2008 -0500
+
+ Blackfin: only flag L1 instruction for DMA memcpy
+
+ The performance difference from doing an 8 bit DMA memcpy vs an optimized
+ core memcpy can be pretty big when you add in the overhead of setting up the
+ MDMA registers, cache flushes, etc... So only use dma_memcpy() when we
+ actually require it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e347c092a3b3a2ce1e72f25f4829163634d09fbe
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 5 07:20:37 2008 -0500
+
+ Blackfin: dma_memcpy(): fix random failures
+
+ We have to make sure the DMA channel is actually disabled in hardware before
+ attempting to reprogram it. Otherwise the new settings are ignored and we
+ end up with random hangs/failures.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fdce83c108846d6f0d5b1774e1cc29f2573a6ad3
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Nov 4 00:04:03 2008 -0500
+
+ Blackfin: rewrite cache handling functions
+
+ Take the cache flush functions from the kernel as they use hardware loops in
+ order to get optimal performance.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 84c5f0dc47d17593fd81206614891bdc94f6d51c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Nov 3 22:30:05 2008 -0500
+
+ Blackfin: setup bi_enetaddr for single nets
+
+ For systems with CONFIG_NET_MULTI disabled, bi_enetaddr does not get setup
+ based on $ethaddr, so set it up.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 40599239e7875b39e2a5c12e6545992041c72c52
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Oct 24 22:48:47 2008 -0400
+
+ Blackfin: cache core/system clock values
+
+ Calculating the clocks requires a bit of calls to gcc math functions, so
+ cache the values after the first run since they'll most likely never
+ change once U-Boot is up and running.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6957a6209b02f6b69607fc47425f13731cc477f1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Oct 24 18:18:16 2008 -0400
+
+ Blackfin: enable --gc-sections
+
+ Start building all Blackfin boards with -ffunction-sections/-fdata-sections
+ and linking with --gc-sections.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ee1d2001ea7fbabb2b9256026dc5468f057337f8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 20 21:08:54 2008 -0400
+
+ Blackfin: dont check baud if it wont actually get used
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 400f5778f375bc99c73c8488c555def261ccfab7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 07:54:09 2008 -0400
+
+ Blackfin: add driver for on-chip SPI controller
+
+ This fills out the SPI backend for the Blackfin on-chip SPI peripheral.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7a1e87b1062e6eac0704c6fc2f7c661caf8814cd
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 18 05:33:51 2008 -0400
+
+ Blackfin: only build post code when CONFIG_POST
+
+ Save some time by using CONFIG_POST in the Makefile rather than C files.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6d7d4803c74bb86e1b401b1199e63381a62b9382
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jan 8 11:57:57 2009 -0500
+
+ Blackfin: bfin_mac: cleanup pointer/casts for aliasing issues
+
+ Redo how pointers are managed to get rid of ugly casts and strict pointer
+ aliasing issues that are highlighted by gcc 4.3.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 092d2487baf7c29343c165e3ae82ea8a7f9e679b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 9 17:46:21 2008 -0500
+
+ Blackfin: bfin_mac: convert CONFIG_BFIN_MAC_RMII to CONFIG_RMII
+
+ No point in having a Blackfin-specific define "CONFIG_BFIN_MAC_RMII" that
+ does exactly the same thing as common "CONFIG_RMII".
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8eed6ca51e50fade6887e8bdb1ff6a44116b42b5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 5 06:36:15 2008 -0500
+
+ Blackfin: bfin_mac: use common debug()
+
+ Rather then defining our own DEBUGF(), just use the common debug().
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a7ec6ac8b2c6dce6fc670a2a855deb6eee340e04
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 20 13:59:51 2008 -0400
+
+ Blackfin: bfin_mac: respect CONFIG_PHY_{ADDR,CLOCK_FREQ}
+
+ Rather than having the on-chip MAC hardcoded to phy address 1 and a speed
+ of 2.5mhz, use these as defaults if the board doesn't specify otherwise.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ac45af4e63ea925f4accc98453aab1a1166c196d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 04:52:00 2008 -0400
+
+ Blackfin: bfin_mac: cleanup MII/PHY functions
+
+ Cleanup and rewrite the MII/PHY related functions so that we can reuse the
+ existing common linux/miiphy.h code and hook into the `mii` command.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6b310a05f0d10c751f22468040932139f71c71d3
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 00:31:30 2008 -0400
+
+ Blackfin: bfin_mac: set MDCDIV based on SCLK
+
+ Rather than hardcoding MDCDIV to 24 (which is correct for ~125mhz SCLK),
+ use the real algorithm so it gets set correctly regardless of SCLK.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 930590f3e49c8f32256edf2e5861e1535a329c6c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 09:10:48 2009 +0100
+
+ ixp: move serial to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f90c8022f448bc5e93090e4b714368e52e912f0f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 09:04:58 2009 +0100
+
+ ixp: move pci init in arm/board instead of cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8cb79b5f275f1888ccb278a2d2197140444a84b7
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 08:56:49 2009 +0100
+
+ ixp: move pci drivers to drivers/pci
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 012d5bab09a534e4800b02f50cf508e6837202ea
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 08:53:44 2009 +0100
+
+ ixp: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f693f501d67434df1f815fd1824a71973ae08207
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 08:53:44 2009 +0100
+
+ ixp: add missing os define
+
+ need by arm-elf toolchains and no impact on the arm-linux one
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b4e2f89dfcb206a22d34fa6b34878d85b498b39f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 09:53:39 2009 +0100
+
+ ixp: remove the option to include the Microcode
+
+ instead the board will have to load it from flash or ram
+ which will be specified by npe_ucode env var
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1b017baf2071d8daf643bce87250db898c606c66
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jan 30 09:45:23 2009 +0100
+
+ ixp/npe: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4e69087a1d6ef2eca6f46026cf5e7399b6c9e7c0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Jan 28 21:58:04 2009 +0100
+
+ SX1: add hardware V2 support
+
+ In the V2 the 2 flash has been replace by one 32MB flash
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f877f2233dbcd7417c2f0babe6a849099b167f3c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Jan 28 21:58:03 2009 +0100
+
+ SX1: Fix second flash mapping
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 47fd3bffed6430c91eb2660f859574ed98be5bd8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Jan 28 21:58:03 2009 +0100
+
+ SX1: add CONFIG_STDOUT_USBTTY to enable preboot stdout redirect to usbtty
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit cfca33837ec83829c6a49c3bcc86c31bc2495ff6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Jan 28 21:57:59 2009 +0100
+
+ move Samsung's board to board/samsung
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e4943ec57466ea5dfa085e7a9e0ec44cb93c4e1e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jan 29 12:07:21 2009 +0100
+
+ move ARM Ltd. to vendor dir
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a87fb1b308a2a375cb9ca74ca0dd3e2c5793d3bf
+Author: Larry Johnson <lrj@acm.org>
+Date: Wed Jan 28 15:30:37 2009 -0500
+
+ ppc4xx: Clean up configuration file for Korat board
+
+ This patch updates the default environmental variables for the
+ Korat PPC 440EPx board, and makes additional minor fixes.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f20405e31680efc36293c59b4963db57c9d93df4
+Author: Larry Johnson <lrj@acm.org>
+Date: Wed Jan 28 15:30:02 2009 -0500
+
+ ppc4xx: Add variable "korat_usbcf" for Korat board
+
+ The new environment variable "korat_usbcf" selects the USB
+ port used by the Korat board's CompactFlash controller.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fc01ea1e27d5b124f0a1868d0ce569f156d58dfe
+Author: Gunnar Rangoy <gunnar@rangoy.com>
+Date: Fri Jan 23 12:56:31 2009 +0100
+
+ AVR32: macb - Search for PHY id
+
+ This patch adds support for searching through available PHY-addresses in
+ the macb-driver. This is needed for the ATEVK1100 evaluation board,
+ where the PHY-address will be initialized to either 1 or 7.
+
+ This patch adds a config option, CONFIG_MACB_SEARCH_PHY, which when
+ enabled tells the driver to search for the PHY address.
+
+ Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
+ Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
+ Signed-off-by: Olav Morken <olavmrk@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit af8626e0c08a780d9ded1d9c4883a89355f60e75
+Author: Olav Morken <olavmrk@gmail.com>
+Date: Fri Jan 23 12:56:26 2009 +0100
+
+ Fix IP alignment problem
+
+ This patch removes volatile from:
+ volatile IP_t *ip = (IP_t *)xip;
+
+ Due to a bug, avr32-gcc will assume that ip is aligned on a word boundary when
+ using volatile, which causes an exception since xip isn't aligned on a word
+ boundary.
+
+ Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
+ Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
+ Signed-off-by: Olav Morken <olavmrk@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 12a8b9db12f82a189ff143a58731007f5469da61
+Author: Ron Madrid <ron_madrid@sbcglobal.net>
+Date: Wed Jan 28 16:17:21 2009 -0800
+
+ Marvell 88E1118 interrupt fix
+
+ This patch adjusts the LED control so that interrupt lines are not reading LEDs
+ and effectively causing indefinite interrupts to the controller.
+
+ Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9a37f2acc31a3296dddd3574ea9eaf7f319807b9
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:14:26 2009 +0100
+
+ net: smc911x.c: Add LAN9211 to chip_ids[] array
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 75edebe3011c963a7cd84be0f4a987477f2aaf89
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 27 16:53:39 2009 -0500
+
+ Move is_valid_ether_addr() to include/net.h
+
+ Import the is_valid_ether_addr() function from the Linux kernel.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 268859338c0188eab1d0d3b867b7dad3c5cc734a
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jan 5 12:25:13 2009 +0100
+
+ net: Sort Makefile labels
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1fbcbe9a95f39afb2df6ab8cba25b284b47ebfb2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 28 23:06:42 2009 +0100
+
+ 85xx: Fix compile breakage with sbc8540 and sbc8560
+
+ This fixes an error which raises just a warning:
+ sbc8560.c:250: warning: passing argument 2 of 'strmhz' makes integer from pointer without a cast
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 62625c0b081bd4019cecab14e9fc2e05e48d2a58
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Jan 28 13:48:55 2009 -0500
+
+ SPD823TS: do not define CONFIG_CMD_ENV
+
+ Since the SPD823TS board does not actually have any writable flash to save
+ its environment, undefine CONFIG_CMD_ENV so the "saveenv" command is
+ disabled.
+
+ This fixes the build error:
+ common/libcommon.a(cmd_nvedit.o): In function `do_saveenv':
+ common/cmd_nvedit.c:557: undefined reference to `saveenv'
+ make: *** [u-boot] Error 1
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7379f45a7bc71941c3920c2f6b3c3faa4d7fd315
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Jan 28 21:40:16 2009 +0100
+
+ OMAP3: Add Zoom1 board support
+
+ Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here:
+ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
+
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+
+commit 2be2c6cc674e26237962f5cf4c0d311e139e4241
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Jan 28 21:39:58 2009 +0100
+
+ OMAP3: Add Pandora support
+
+ Add Pandora support.
+
+ Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+
+commit ad9bc8e52d174d699d1367be0b90089e4fdeb933
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Jan 28 21:39:58 2009 +0100
+
+ OMAP3: Add EVM board
+
+ Add EVM board support.
+
+ Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+
+commit 9d0fc8110e7e755239329c26f300d5fc9946d3ec
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Jan 28 21:39:57 2009 +0100
+
+ OMAP3: Add Overo board
+
+ Add Overo board support.
+
+ Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+
+commit f904cdbb68167c647887f19929ad295dbaac8862
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Tue Jan 27 18:19:12 2009 +0100
+
+ OMAP3: Add common power code, README, and BeagleBoard
+
+ Add BeagleBoard support, common power code and README.
+
+ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 9cda4f104b5313fadc21b75aa781c7a6aaf6ea60
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 28 08:31:10 2009 -0600
+
+ 85xx: Fix compile breakage with MPC8540EVAL
+
+ Configuring for MPC8540EVAL board...
+ mpc8540eval.c: In function 'checkboard':
+ mpc8540eval.c:53: error: invalid operands to binary /
+ make[1]: *** [mpc8540eval.o] Error 1
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1a448db77b10153703bc5e4ad13dd55d88beb1d6
+Author: Bryan Wu <bryan.wu@analog.com>
+Date: Sun Jan 18 23:04:27 2009 -0500
+
+ usb_scan_devices: fix output with no devices
+
+ We should check the return of usb_new_device() so that if no USB device is
+ found, we print out the right message rather than always saying "new usb
+ device found".
+
+ Signed-off-by: Bryan Wu <bryan.wu@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit f1c1f540243438246aefb703fdcf16957e3a72e1
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 22 10:11:21 2009 +0100
+
+ USB: Add high-speed (480Mb/s) to all USB related outputs
+
+ With this patch the USB related connection speed output ("usb tree" command and
+ debug output) is now high-speed enabled.
+
+ This patch also fixes a compilation warning when debugging is enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit daa2dafb450a8073a4e42fd46cd4e995b208e4cb
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:12:19 2009 +0100
+
+ USB: Add dcache support to the EHCI driver
+
+ This patch adds routines to handle (flush/invalidate) the dcache for the
+ QH and qTD structures and data buffers. This is needed on platforms using
+ this EHCI support with dcache enabled (like the MIPS VCT board port).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 4e0ea0efc1e501186aca8577a4042fc6fa641602
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:12:28 2009 +0100
+
+ USB: Add EHCI support for VCT EHCI controller
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 832e61418eedfea172bd2fdfd0ea0d199cc70a9d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:12:10 2009 +0100
+
+ USB: Add config option to call ehci_hcd_init() again after EHCI reset
+
+ This patch adds the config option CONFIG_EHCI_HCD_INIT_AFTER_RESET
+ to call ehci_hcd_init() again after ehci_reset() is executed. This
+ is needed for the upcoming VCT EHCI support which needs to re-init
+ the hcd part again after the EHCI CMD_RESET is executed.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 597eb28bd9691266b7b804364cda577cdb51d106
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:12:01 2009 +0100
+
+ USB: Fix speed detection on EHCI cntr with root hub transaction translators
+
+ This patch fixes an issue that the speed of USB devices was not detected
+ correctly on some EHCI controllers. This will be used on the upcoming VCT
+ EHCI support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 20cc06611ea33fc0a67a5e56e6476379d2de3091
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 09:41:20 2009 +0530
+
+ usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform
+
+ Enabling USB MSC support for DM6446 (TI DaVinci) platform in the
+ configuration file.
+
+ Signed-off-by: Ravi Babu <ravibabu@ti.com>
+ Signed-off-by: Swaminathan S <swami.iyer@ti.com>
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 538ef967715322f64ee08efa2296d9682111b014
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 09:41:16 2009 +0530
+
+ usb : musb : Enabling DM6446 (TI DaVinci) USB module power
+
+ Enabling DM6446 (TI DaVinci) USB module power and MUSB low-level
+ controller hook up to USB core layer.
+
+ Signed-off-by: Ravi Babu <ravibabu@ti.com>
+ Signed-off-by: Swaminathan S <swami.iyer@ti.com>
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit e142e9f35f8ec61e74bf8019428b003f5070c33b
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 09:41:13 2009 +0530
+
+ usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support
+
+ Adding DM6446 (TI DaVinci) platform specific USB functionality for
+ USB Phy and VBUS initialization.
+
+ Signed-off-by: Ravi Babu <ravibabu@ti.com>
+ Signed-off-by: Swaminathan S <swami.iyer@ti.com>
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit a9d39ebe91ecdd5ac0a0cf56ea162a19773db8da
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 09:41:09 2009 +0530
+
+ usb : musb : Adding USB VBUS enable functionality for DM644x DVEVM
+
+ Adding USB VBUS enable functionality for DM644x DVEVM (TI DaVinci)
+ platform.
+
+ Signed-off-by: Ravi Babu <ravibabu@ti.com>
+ Signed-off-by: Swaminathan S <swami.iyer@ti.com>
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit a142896934c755e679ba87e227a8e449f39b0012
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 09:41:03 2009 +0530
+
+ usb : musb : Adding host controller driver for Mentor USB controller
+
+ Adding Mentor USB core functionality and Mentor USB Host controller
+ functionality for Mentor USB OTG controller (musbhdrc).
+
+ Signed-off-by: Ravi Babu <ravibabu@ti.com>
+ Signed-off-by: Swaminathan S <swami.iyer@ti.com>
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit c7d703f3f3c3d6b020bda4cf633f8a6167c3cd2a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jan 1 18:27:27 2009 -0500
+
+ usb.h: use standard __LITTLE_ENDIAN from Linux headers
+
+ Rather than forcing people to define a custom "LITTLEENDIAN", just use the
+ __LITTLE_ENDIAN one from the Linux byteorder headers that every arch is
+ already setting up.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 7b6e31eb17e3ff76238a60803fc531517d516223
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Dec 31 10:33:56 2008 +0100
+
+ USB ehci ixp4xx support
+
+ Add USB ehci ixp4xx host controller. Test on ixdp465 board.
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 1ed9f9adc88218841dfeb60b9094a5a548bff009
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Dec 31 10:33:22 2008 +0100
+
+ USB ehci remove infinite loop and use handshake function
+
+ USB ehci code cleanup. Use handshake instead of infinite while loop
+ to check the STD_ASS status
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 8fea2914ac974029b65926ef8247d908f84d202d
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Dec 31 10:32:41 2008 +0100
+
+ Add initial support for USB ehci pci
+
+ Add USB ehci pci support. This patch doesn't include any
+ pci_ids and it is not tested on real hardware.
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 14e4111cdab7e7738ff6a203d445e4d8377f058f
+Author: Bryan Wu <Bryan.Wu@analog.com>
+Date: Thu Jan 1 19:48:07 2009 -0500
+
+ usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive
+
+ The SanDisk Corporation U3 Cruzer Micro 1/4GB Flash Drive 000016244373FFB4
+ does not like to be reset, so check for it.
+
+ Signed-off-by: Bryan Wu <bryan.wu@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 1eb734fed3b79a5e6106dad16e88041894fdab30
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 12:15:35 2009 +0530
+
+ usb : usb_kbd : Populating 'priv' member of USB keyboard device_t structure
+
+ This patch populates the 'priv' field of the USB keyboard device_t
+ structure. The 'priv' field is populated with the address of the
+ 'struct usb_device' structure that represents the USB device.
+
+ The 'priv' field can then be used in the 'usb_event_poll' function to
+ determine the USB device that requires to be polled. An
+ example of its usage in 'usb_event_poll' function is as below.
+
+ device_t *dev;
+ struct usb_device *usb_kbd_dev;
+
+ <snip>
+
+ dev = device_get_by_name("usbkbd");
+ usb_kbd_dev = (struct usb_device *)dev->priv;
+ iface = &usb_kbd_dev->config.if_desc[0];
+
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 366523c26b6320af171459b19e6e0e9e3baa83ca
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Thu Dec 18 10:05:37 2008 +0100
+
+ USB change speed
+
+ USB changes the speed according to the port status
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit c0d722fe7ee1cb452dfd9246419188b3f6d9c4df
+Author: Remy Böhmer <linux@bohmer.net>
+Date: Sat Dec 13 22:51:58 2008 +0100
+
+ EHCI fix code and ixp4xx test.
+ USB ehci configuration parameter:
+
+ #define CONFIG_CMD_USB 1
+ #define CONFIG_USB_STORAGE 1
+ #define CONFIG_USB_EHCI
+ #define CONFIG_USB_EHCI_IXP4XX 1
+ #define CONFIG_EHCI_IS_TDI 1
+ #define CONFIG_EHCI_DESC_BIG_ENDIAN 1
+ #define CONFIG_EHCI_MMIO_BIG_ENDIAN 1
+ #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
+ #define CONFIG_LEGACY_USB_INIT_SEQ 1
+
+ 2 USB Device(s) found
+ scanning bus for storage devices... 0 Storage Device(s) found
+ => usb tree
+
+ Device Tree:
+ 1 Hub (1.5MBit/s, 0mA)
+ | u-boot EHCI Host Controller
+ |
+ |+-2 Mass Storage (12MBit/s, 100mA)
+ Sony Storage Media 0C07040930296
+
+ =>
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 51ab142b8b546d5e627b2c8c36d0adae222565f7
+Author: michael <michael@panicking.retis>
+Date: Thu Dec 11 13:43:55 2008 +0100
+
+ [PATCH] This patch add varius fix to the ehci.
+ - fix ehci_readl, ehci_writel
+ - introduce new define in ehci.h
+ - introduce the handshake function for waiting on a register
+ - fix usb_ehci_fsl with the new HC_LENGTH macro
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit db63299b1dd2894ade542278210bccd046de6435
+Author: michael <michael@panicking.retis>
+Date: Wed Dec 10 17:55:19 2008 +0100
+
+ [PATCH] Fix EHCI usb. I start to test on a
+ IXP465 board and I find some errors in the code. This
+ patch fix:
+ - descriptor initizialization (config, interface and endpoint
+ must be one next-to the other when the USB_DT_CONFIG message
+ is send.
+ - FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_BIG_ENDIAN
+ and the CONFIG_EHCI_MMIO_BIG_ENDIAN)
+ - Introduce the linux version of the usb_config_descriptor and
+ usb_interface descriptor. This descriptor does't contains
+ u-boot extension.
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 6b92487dcf9afe83a3570153d66940fdb293be76
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Fri Nov 28 13:22:09 2008 +0100
+
+ USB ehci freescale support
+
+ Add USB ehci freescale support
+
+ Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit aaf098cfeed04595d4c5100ffd39095d79edbf90
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Fri Nov 28 13:20:46 2008 +0100
+
+ USB ehci core support
+
+ Add USB ehci core support
+
+ Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 3e126484df7868e341545cce740b24b62b0cd3b7
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Fri Nov 28 13:19:19 2008 +0100
+
+ Prepare USB layer for ehci
+
+ Prepare USB layer for ehci support
+
+ Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit a0cb3fc31e58996a1c5732715ac04159d4d284fd
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Dec 10 15:52:06 2008 +0100
+
+ USB storage cleanup patch
+
+ Cleanup usb storage
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit fe033ad6d0883063fe857237abb9436fab03208c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 06:02:55 2008 -0400
+
+ Blackfin: fixup misc warnings such as printf's and missing casts
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1f4a3bb50343719c434d7e2541a2f86480a6d25c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 22:09:26 2008 -0400
+
+ Blackfin: convert old boards to use COBJS-y Makefile style
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1f75d6f0ff005762d3e6ad92ae4ce2ab366b3bb5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:38:37 2008 -0400
+
+ Blackfin: bf533-stamp: rewrite resource swap logic
+
+ The old swap function tended to clobber unrelated pins and screw up masks.
+ Rewrite the thing from scratch so it only uses the resources it needs.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 29d4ea0a9073c82469184331010136f52edf8db6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:08:42 2008 -0400
+
+ Blackfin: bootldr: implement BF53x/BF56x LDR loader
+
+ The BF53x/BF56x parts do not have an on-chip ROM to boot LDRs out of
+ arbitrary memory locations, so implement a basic one in software.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8b35e3aeff6c2d747c37697997b3f8a808432329
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:05:42 2008 -0400
+
+ Blackfin: implement real write support for OTP
+
+ Now that real documentation has been released for the OTP interface and
+ the on-chip ROM wrt writing/timings, implement support for reading/writing
+ as well as dumping/locking.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9372c3214808fab545227d8d0f76b3bfcc6760ec
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:04:05 2008 -0400
+
+ Blackfin: update on-chip ROM API
+
+ This brings the API for the on-chip ROM in line with the toolchain and
+ hardware documentation.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7633903bff432ec7b27905dce7396958553f2be6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:52:17 2008 -0400
+
+ Blackfin: allow serial console to be disabled
+
+ Some devices have no UART device pulled out, so allow people to disable the
+ driver completely in favor of other methods (like JTAG-console).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 36ea8e9ad1107af12d244bba8c73e85b9f655e45
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:51:20 2008 -0400
+
+ Blackfin: support console-over-JTAG
+
+ The Blackfin JTAG has the ability to pass data via a back-channel without
+ halting the processor. Utilize that channel to emulate a console.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cf8f2efb5f39c5225da92391c14a07eecbeca881
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:49:06 2008 -0400
+
+ Blackfin: handle new anomalies with reset
+
+ Workaround fun new anomalies related to software reset of the processor.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b1e9435b643043dd8fbd1fcc47309c6acb7b3c8e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:44:00 2008 -0400
+
+ Blackfin: pass RETX to Linux
+
+ Make sure we save the value of RETX at power on and then pass it on to the
+ kernel so that it can nicely debug a "double-fault-caused-a-reset" crash.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b5eba3fafcccd1979380f12a256bd0e19be3d61e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:40:26 2008 -0400
+
+ Blackfin: clarify relocation comment during init
+
+ People often ask questions about the init process and when things go
+ from flash to relocated base, so clarify the comments a bit.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 95433f6d43ede6b40c1d900f3f704c839aa074f1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:23:41 2008 -0400
+
+ Blackfin: just set SP register directly during init
+
+ No need to set the SP register indirectly to the configured value when it
+ can be set directly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 51230e6e356ccf4c932e0c4ff54f1e49da02285c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:15:53 2008 -0400
+
+ Blackfin: add portmuxing for UARTs on the BF51x
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4f6a313240c531042f16909a3a170ab047b95779
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 1 01:26:29 2008 -0400
+
+ Blackfin: respect CONFIG_CLKIN_HALF
+
+ As pointed out by Ivan Koryakovskiy, the initialization code was not
+ actually respecting the CONFIG_CLKIN_HALF option when configuring the
+ PLL_CTL register.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit dc2bfb0b58d7462b9eba68f3ae38e38cada0ad33
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 1 01:21:34 2008 -0400
+
+ Blackfin: use common memcpy routine during init
+
+ Rather than using a local custom memcpy function, just call the existing
+ optimized Blackfin version.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 362c943347364e9373af4c5530778491ab56ec2e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Apr 9 02:27:06 2008 -0400
+
+ Blackfin: set default boot SPI CS for BF538/BF539
+
+ The BF538/BF539 use CS2 for booting off of rather than CS1 like newer
+ Blackfin parts.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 74dde80bd5d55bc146630853ca191aaeea7c30f4
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Apr 9 02:20:59 2008 -0400
+
+ Blackfin: punt unused BF533-STAMP definitions
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fee531eeefc3b5f2c63c7fe27b9f55d924c59c26
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 18 20:44:11 2008 -0400
+
+ Blackfin: resurrect BF533-STAMP video splash driver
+
+ This video driver used to live in the Blackfin cpu directory, but it was
+ lost during the unification process. This brings it back.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a750d038f2548d846ea1e046d873dc932d041319
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Apr 9 02:31:29 2008 -0400
+
+ Blackfin: tighten up post memory coding style
+
+ No functional changes here; just cleanup code style a bit.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0649908f92c9bd214dd139aa3d4698c1654a45c6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Apr 9 02:29:18 2008 -0400
+
+ Blackfin: bf537-stamp nand: fix more style errors in previous commit
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 41f3325ae9add641036d7cb362e884b698e53f07
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 20:31:17 2008 -0400
+
+ Blackfin: drop dead/wrong debug code in initdram()
+
+ The DEBUG code in initdram() is quite old and was never really useful, so
+ just drop it altogether. Common Blackfin debug code does a better job.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 65ba1abd3b90e0b2585745809b78e2651bd3bacb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 20:30:28 2008 -0400
+
+ Blackfin: bf533-ezkit: shuffle flash defines a little
+
+ Some of the flash defines weren't in the correct location and caused build
+ problems in some configurations, so let's move types and defines to better
+ local locations.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit be853bf86b41e91f4c422f0f56fdf87ea3191266
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:16:47 2008 -0400
+
+ Blackfin: overhaul i2c driver
+
+ The current Blackfin i2c driver does not work properly with certain devices
+ due to it breaking up transfers incorrectly. This is a rewrite of the
+ driver and relocates it to the newer place in the source tree.
+
+ Also remove duplicated I2C speed defines in Blackfin board configs and
+ disable I2C slave address usage since it isn't implemented.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b6edc719a106ab7fa6e6950b4d97bc39c1368e45
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:00:07 2008 -0400
+
+ Blackfin: respect CONFIG_SYS_MONITOR_LEN for default flash protection
+
+ Respect the CONFIG_SYS_MONITOR_LEN define rather than assuming a size of
+ 128kB when setting up the default flash protection region for U-Boot
+ itself.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 78a0ba7dc24c9682371f6ee8549b569fb573a329
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:57:39 2008 -0400
+
+ Blackfin: respect/check CONFIG_SYS_GBL_DATA_SIZE
+
+ When setting up the global data, rather than relying on sizeof(), use the
+ common CONFIG_SYS_GBL_DATA_SIZE define.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 01815c2d06c5b838f2cd536703e47bd2c9148194
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:52:24 2008 -0400
+
+ Blackfin: implement general support for CONFIG_STATUS_LED
+
+ Here are the Blackfin-specific and board-independent pieces for status leds.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6882b5a79a3247494b62c05015fa672557f1bfaa
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:49:32 2008 -0400
+
+ Blackfin: do not init i2c in Blackfin board init
+
+ The common code takes care of calling i2c_init() when needed, so no point
+ in us doing it as well.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1118ea73698eee6e72ef5cbfc00e41746040304f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:42:20 2008 -0400
+
+ Blackfin: bfin_mac: update port muxing
+
+ Adds support more Blackfin parts and fixes broken muxing for older ones.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 05b75e48832fc4afeecf8e76d704349557dffa35
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:35:44 2008 -0400
+
+ Blackfin: fix dcache handling when doing dma memcpy's
+
+ Our dcache invalidate function doesn't just invalidate, it also flushes.
+ So rename the function accordingly and fix the dma_memcpy() function so it
+ doesn't inadvertently corrupt the data destination.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 68e5632494168095d75f120af70043b68afd2476
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 18:56:56 2008 -0400
+
+ Blackfin: dont generate ldrs with --force
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 746290dfd86a70b41fc5fdd3df1424a647d5c5e8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 18:55:30 2008 -0400
+
+ Blackfin: pass --bmode/--initcode when creating ldr
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0332e4df71fccf9a96c5a4393e3c5d5daa50880a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 18:39:27 2008 -0400
+
+ Blackfin: minimize time cache is turned off when replacing cplb entries
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 21d631360430cf0ae9099612273cd4de28911ba9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:31:13 2008 -0400
+
+ Blackfin: split cache handling out of dma_memcpy()
+
+ Creating a new dma_memcpy() function that skips all cache checks allows us
+ to use the function in very early init where the cache is not yet setup.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d31eb38512bed377d5d4b3c696662e52120a2e4c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:30:49 2008 -0400
+
+ Blackfin: abort dma_memcpy() for L1 scratchpad
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 81b799add709177e838466461f7b9989488b0fd5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:27:52 2008 -0400
+
+ Blackfin: rename bootm.c to boot.c
+
+ The boot file contains functions for more than just "bootm", so rename it
+ accordingly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d7ca7dd5bfc418ac173e9d2712f6cc2d8147a091
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:22:37 2008 -0400
+
+ Blackfin: set more sane default board config values
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 36cd52a00794fb15ffab05d640acca92d7482993
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:24:59 2008 -0400
+
+ Blackfin: convert CMD_LINE_ADDR to CONFIG_LINUX_CMDLINE_{ADDR,SIZE}
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c8054bc12e00669bd7588f2b30fef48aa94babac
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:21:27 2008 -0400
+
+ Blackfin: add bit defines for DDR parts
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 154502fe0796f3b7a4698378c5d2080ae28a9782
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:21:11 2008 -0400
+
+ Blackfin: add defines to describe active bootrom behavior
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2b6fd5c77db9c6ed3cea9799c86ff922cf0107b2
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jan 27 16:03:53 2009 -0600
+
+ mpc83xx: fix undefined reference to `flush_cache' error in simpc8313 build
+
+ extend commit c70564e6b1bd08f3230182392238907f3531a87e
+ "NAND: Fix cache and memory inconsistency issue" to add the cache.o dependency
+ to the simpc8313 build and fix this:
+
+ ...Large Page NAND...Configuring for SIMPC8313 board...
+ nand_boot_fsl_elbc.o: In function `nand_boot':
+ nand_spl/board/sheldon/simpc8313/nand_boot_fsl_elbc.c:150: undefined reference to `flush_cache'
+ make[1]: *** [/home/r1aaha/git/u-boot-mpc83xx/nand_spl/u-boot-spl] Error 1
+ make: *** [nand_spl] Error 2
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 54a7cc4912feefa45be961cc47cc159563725d2f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 28 09:25:31 2009 +0100
+
+ mpc8536ds.c: include sata.h to for needed function prototypes
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2fb2604d5c20beb061b0a94282b7f6eb14d00cb8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jan 27 18:03:12 2009 -0600
+
+ Command usage cleanup
+
+ Remove command name from all command "usage" fields and update
+ common/command.c to display "name - usage" instead of
+ just "usage". Also remove newlines from command usage fields.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 79621bc10ba8b8c45d348994aba5b9e4923cb77b
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jan 27 18:03:11 2009 -0600
+
+ amcc: Clean up command usage output
+
+ Update taihu and taishan commands to use cmd_usage() function
+ to display usage messages.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 62c3ae7c6ef215b1afa614abdf61acf077752207
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jan 27 18:03:10 2009 -0600
+
+ Standardize command usage messages with cmd_usage()
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 84cde2bb409c07c6ef36a192d194359d4e9ccd70
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jan 27 18:03:09 2009 -0600
+
+ pcs440ep: Clean up led command definition
+
+ The pcs440ep's led command usage formatting is non-standard. It
+ was made standard in preparation for larger command usage updates.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 9507e7867e04dc48c80ee333c2a9a5e70e887f62
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jan 27 18:03:08 2009 -0600
+
+ Clean up diufb command definitions
+
+ The diufb command usage formatting is non-standard. It was
+ made standard in preparation for larger command usage updates.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 6450a8485836fc80615ae6de6a864c33369b44f5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 28 00:29:26 2009 +0100
+
+ Update CHANGELOG, tiny coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cf7e399fb35b3aea90a27d1df72f45f5d6156204
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 27 16:12:21 2009 -0500
+
+ SATA: do not auto-initialize during boot
+
+ Rather than have the board code initialize SATA automatically during boot,
+ make the user manually run "sata init". This brings the SATA subsystem in
+ line with common U-Boot policy.
+
+ Rather than having a dedicated weak function "is_sata_supported", people
+ can override sata_initialize() to do their weird board stuff. Then they
+ can call the actual __sata_initialize().
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 50970839712dda35399e2fa83fe818df9354d618
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Mon Jan 26 08:45:14 2009 -0500
+
+ part_efi: Fix partition size calculation due to inclusive ending LBA.
+
+ The ending LBA is inclusive. Hence, the partition size should be
+ ((ending-LBA + 1) - starting-LBA) to get the proper partition size.
+
+ This is confirmed against the results from the parted tool.
+ (e.g. use parted /dev/sda -s unit S print) and observe the size.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit b5b004ad8a0ac6f98bd5708ec8b22fbddd1c1042
+Author: Tomasz Figa <tomasz.figa@gmail.com>
+Date: Tue Dec 30 18:35:57 2008 +0100
+
+ jffs2: Fix zero sector_size when not using CONFIG_JFFS2_CMDLINE
+
+ This patch fixes a bug (?) introduced after inclusion of the new
+ JFFS2 code.
+
+ When not using CONFIG_JFFS2_CMDLINE, the code in cmd_jffs2.c doesn't
+ fill in part->sector_size (keeping it as 0), but a correct value is
+ needed by the code in jffs2_1pass.c. This causes all JFFS2 accesses
+ to be in the same place of the memory, what obviously means
+ impossibility to use the JFFS2 partition.
+
+ This problem is fixed in this patch by including sector size
+ calculation in non-CONFIG_JFFS2_CMDLINE mtdparts_init variant.
+
+ Signed-off-by: Tomasz Figa <tomasz.figa_at_gmail.com>
+
+commit ba69dc26a5fd606da49573bb2f15e756a34f3f98
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 30 02:59:25 2008 -0500
+
+ saveenv: standardize enablement
+
+ Rather than special casing each environment type for enabling the saveenv
+ command, have them all behave the same. This avoids bitrot as new env
+ sources are added/removed.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2ac6985a7466a1c8a7aa8b2fa24d360925a82764
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Mon Dec 29 17:36:01 2008 -0600
+
+ soft_i2c.c add option for repeated start in i2c_read()
+
+ This patch adds a #define to optionally change the behaviour of
+ i2c_read() in soft_i2c.c to send an I2C repeated start instead of a
+ stop-start between sending the device address pointer write and
+ reading back the data. The current behaviour is retained as the
+ default.
+
+ While most devices will work either way, I have a smart battery(*)
+ that requires repeated start, and someone at some point found a
+ device that required a stop-start.
+
+ (*) http://www.inspired-energy.com/Standard_Products/NL2054/NL2054%20Rev1.0%20Data%20Sheet.pdf
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit 3429071700963ca2f944c51d695a7481af0cee33
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jan 27 22:07:14 2009 +0100
+
+ {delta,zylonite}/lowlevel_init.S: fix typo
+
+ Commit 9d803d8c mistakenly changed some constants
+ from 0x300 into 300 - this patch fixes it.
+
+ Pointed out by Tom Evans <tom@ceos.com.au>, see
+ http://article.gmane.org/gmane.comp.boot-loaders.u-boot/51992 for
+ details.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1bc434373013af241835c14011ac3f291dccbf53
+Author: Stefan Althoefer <stefan.althoefer@web.de>
+Date: Sat Dec 20 19:40:41 2008 +0100
+
+ drivers/net/e1000.c: missing terminator for supported devices
+
+ Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
+
+commit 65f7d41031a70b1649b35020995c505edca91533
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jan 27 21:36:28 2009 +0100
+
+ fat.c: fix warning: array subscript is above array bounds
+
+ Fix based on suggestion by David Hawkins <dwh@ovro.caltech.edu>.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 107b801cf3fe39612d69d70581ebc3bf5e215554
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 15:11:41 2009 +0100
+
+ Fix gunzip in case of insufficient output buffer
+
+ U-Boot's gunzip() function does not handle the return code
+ of zlib's inflate() function correctly. gunzip() is implemented
+ to uncompress all input data in one run. So the correct return
+ code for the good case is Z_STREAM_END. In case of insufficient
+ output buffer memory inflate returns Z_OK. For gunzip() this
+ is an error.
+
+ It also makes sense to me to call inflateEnd() also in case
+ of an error.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 2a61eff6a82f0d6e2335d968799b3fbeb3ff4d8e
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:25:01 2009 +0100
+
+ MIPS: Add VCT board series support (Part 3/3)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ae691e5719c48f1d2826cb72722497d1d162765b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:24:49 2009 +0100
+
+ MIPS: Add VCT board series support (Part 2/3)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 50752790bc9285c0c1c5235e88f3a4ef2eec1e72
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:24:39 2009 +0100
+
+ MIPS: Add VCT board series support (Part 1/3)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 03d3bfb00806b5441f1871c7408c1749863e0fdc
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:20:20 2009 +0100
+
+ MIPS: Add flush_dcache_range() and invalidate_dcache_range()
+
+ This patch adds flush_/invalidate_dcache_range() to the MIPS architecture.
+ Those functions are needed for the upcoming dcache support for the USB
+ EHCI driver. I chose this API because those cache handling functions are
+ already present in the PPC architecture.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit de832a99414ff06a4b2cdc9f5280b387da039834
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jan 26 10:05:20 2009 +0100
+
+ nand_spl: Fix compile problem with board_nand_init() prototype
+
+ This patch removes the now obsolete and additionally wrongly defined
+ board_nand_init() prototype from nand_spl/nand_boot.c.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit e8eac437189430d8e04a5d254ed92c58bc534a79
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Wed Jan 14 08:44:26 2009 -0500
+
+ CFI: Add geometry reversal for STMicro M29W320ET
+
+ Added flash_fixup_stm to fix geometry reversal on STMicro M29W320ET flash chip.
+
+ Modeled after flash_fixup_amd, this patch handles the geometry reversal
+ or erase sectors that exist for ST Micro (now Numonyx) M29W320ET flash.
+ Since I cannot test all STM's chips, the detection is implemented as
+ narrow as possible for now.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0f8e851e897b535959a0781171910cd97f33c30c
+Author: Jens Gehrlein <sew_s@tqs.de>
+Date: Tue Dec 16 17:25:55 2008 +0100
+
+ CFI: increase performance of function find_sector()
+
+ Tested on TQM5200S-BD with Samsung K8P2815UQB
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a7292871a79cc48d98e3a708dd3c3b81580db6ef
+Author: Jens Gehrlein <sew_s@tqs.de>
+Date: Tue Dec 16 17:25:54 2008 +0100
+
+ CFI: avoid redundant function call in single word programming mode
+
+ The function find_sector() doesn't need to be called twice in
+ the case of AMD command set.
+ Tested on TQM5200S-BD with Samsung K8P2815UQB.
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c8901f46a71ec16e084e604596a09e23bfb0f6ac
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jan 26 10:15:23 2009 +0100
+
+ ppc4xx: Remove compilation warning in gdppc440etc.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 91f33534728e6416d332ad2b53ad1d6fde57f7fc
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 12:19:47 2009 +0100
+
+ ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
+
+ Lot's of 405 board config files use CONFIG_SYS_IGNORE_405_UART_ERRATA_59.
+ Either they define or undef it. Because it's not used in any source
+ files this patch removes any references to it.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 89b8619aaeafc922ca0c3bb249872591050c8dcc
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Tue Dec 9 13:12:40 2008 +0100
+
+ ppc4xx: Add GDsys PowerPC 440 ETX board support.
+
+ Board support for the Guntermann & Drunck PowerPC 440 ETX module.
+ Based on the AMCC Yosemite board support by Stefan Roese.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3943d2ff6cc40dd601a9feeb39eb6d3d5090ea6d
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Tue Dec 9 11:00:07 2008 +0100
+
+ ppc4xx: Improve DDR autodetect
+
+ Added support for a second memory bank to DDR autodetection for 440
+ platforms.
+ Made hardcoded values configurable.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 71a040f4f556cca4d30f06805d82e717b3ef1020
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Nov 21 12:06:26 2008 +0900
+
+ sh: sh7763rdp: Update sh7763rdp config
+
+ Add CONFIG_NET_MULTI in config file, because sh_eth changed new newwork API.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Thu Nov 20 12:28:38 2008 +0100
+
+ mgcoge make ether_scc.c work with CONFIG_NET_MULTI
+
+ This change is needed for mgcoge because it uses two ethernet drivers.
+
+ Add a check for the presence of the PIGGY board on mgcoge. Without this
+ board networking cannot work and the initialization must be aborted.
+
+ Only allocate rtx once to prevent DPRAM exhaustion.
+
+ Initialize ether_scc.c and the keymile-specific HDLC driver (to be added
+ soon) in eth.c.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit bd3980cc095af1728b994cdd8bf1ac430b6289e6
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Nov 21 12:04:18 2008 +0900
+
+ sh: sh_eth: Change new network API
+
+ sh_eth used old network API. This patch changed new API.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 890a02e8ee6b8c26a6e3e505e1a2d29cd73aa6f6
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 12 13:31:02 2008 +0100
+
+ net: smc911x: Make register read/write functions weak
+
+ This patch changes the reg_read/_write to smc911x_reg_read/_write
+ and defines then as weak so that they can be overridden by board
+ specific version.
+
+ This will be used by the upcoming VCTH board support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8b69b563039989885969d24465c56f8ac4c07c4c
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Nov 20 09:57:14 2008 +0100
+
+ powerpc: net: support for the SMSC LAN8700 PHY
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d5254f149da9e6cd649d887b042ce577ef3ba78d
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Sat Jan 24 18:10:37 2009 +0100
+
+ Initial support for Nomadik 8815 development board
+
+ The NMDK8815 board is distributed by ST Microelectornics.
+ Other (proprietary) code must be run to unlock the CPU before
+ U-Boot runs. doc/README.nmdk8815 outlines the boot sequence.
+
+ This is the initial port, with basic infrastructure and
+ a working serial port.
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7d264c1ef267cfc8d928bc8577a7cc907f2f5e47
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:18 2008 +0100
+
+ OMAP3: Add I2C support
+
+ Add I2C support.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit b1c3bf99fb477675d464aeadb5dd69d2cbc9dc7b
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:17 2008 +0100
+
+ OMAP3: Add MMC support
+
+ Add MMC support.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 12201a13547ec22ddcdae278e74465e54a3be60c
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:16 2008 +0100
+
+ OMAP3: Add NAND support
+
+ Add NAND support.
+
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+ Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 91eee546737ae21d930af479530997174c342b13
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:15 2008 +0100
+
+ OMAP3: Add common board, interrupt and system info
+
+ Add common board, interrupt and system info code.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 5ed3e8659e5373f6a229877ac506c0b00a054fb8
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:14 2008 +0100
+
+ OMAP3: Add common clock, memory and low level code
+
+ Add common clock, memory and low level code
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 0b02b184003e6a5023e05d5f31de54db279b1431
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:13 2008 +0100
+
+ OMAP3: Add common cpu and start code
+
+ Add common cpu and start code.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit a8b6450546cd507d331b8fde384791d84bde5651
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:12 2008 +0100
+
+ OMAP3: Add OMAP3, memory and function prototype headers
+
+ Add OMAP3, memory and function prototype header files for OMAP3.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 2c803210a464abbac35752ca1c737514360b4c32
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:11 2008 +0100
+
+ OMAP3: Add pin mux, clock and cpu headers
+
+ Add pin mux, clock and cpu header files for OMAP3.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 685533646f4ff17a84ec9265cabb60af325b6e1f
+Author: Maxim Artamonov <scn1874@yandex.ru>
+Date: Wed Dec 3 05:38:17 2008 +0300
+
+ bugfix for i.mx31 CCM_UPCTL reg
+
+ Signed-off-by: Maxim Artamonov <scn1874 at yandex.ru>
+
+commit 24113a44ed5cd3257a0237c3961e121812fca6db
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 30 03:15:38 2008 -0500
+
+ easylogo: add optional gzip support
+
+ Some images can be quite large, so add an option to compress the
+ image data with gzip in the U-Boot image. Then at runtime, the
+ board can decompress it with the normal zlib functions.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7e4b9b4f6f43838fad3ad72c029a3d7fc7c7d48c
+Author: Bryan Wu <bryan.wu@analog.com>
+Date: Fri Jan 2 20:47:45 2009 -0500
+
+ fat: fix unaligned errors
+
+ A couple of buffers in the fat code are declared as an array of bytes.
+ But it is then cast up to a structure with 16bit and 32bit members.
+ Since GCC assumes structure alignment here, we have to force the
+ buffers to be aligned according to the structure usage.
+
+ Signed-off-by: Bryan Wu <bryan.wu@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 68f8718df2ed4c2f43031407ccf6cfa81125dddc
+Author: Brad Bozarth <bflinux@yumbrad.com>
+Date: Thu Jan 1 22:45:47 2009 -0500
+
+ spi flash: fix crash due to spi flash miscommunication
+
+ Higher spi flash layers expect to be given back a pointer that was
+ malloced so that it can free the result, but the lower layers return
+ a pointer that is in the middle of the malloced memory. Reorder the
+ members of the lower spi structures so that things work out.
+
+ Signed-off-by: Brad Bozarth <bflinux@yumbrad.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit ce82ff05388b5ddafdf6082ef0776cce72c40b1c
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Sat Dec 20 14:54:21 2008 +0300
+
+ FPU POST: fix warnings when building with 2.18 binutils
+
+ When compile u-boot with the 2.18 binutils the following
+ warning messages for each object file in post/lib_ppc/fpu/ is
+ produced at the linking stage:
+
+ post/libpost.a(acc1.o) uses hard float, u-boot uses soft-float
+ ...
+
+ This is because of the fact that, in general, the soft-float and
+ hard-float ABIs are incompatible; the 2.18 binutils do checking
+ of the Tag_GNU_Power_ABI_FP attribute of the files to be linked, and
+ produce the worning like above if these are not compatible.
+
+ The incompatibility of ABIs is concerned only the float values:
+ e.g. the soft-float ABI assumes the float argument passing in the
+ pair of rX registers, and the hard-float ABI assumes passing of
+ the float argument in the fX register. When we don't pass the float
+ arguments between the functions compiled with different floatness,
+ then such an application will work correctly.
+ This is the case for the FPU POST: u-boot (compiled with soft-float)
+ doesn't pass to (and doesn't get from) the FPU POST functions any
+ floats; there are no functions exported from the post/lib_ppc/fpu/
+ objects which would work with float parameters/returns too. So, we
+ can reassure the linker not to worry about the difference in ABI
+ attributes of linking files just by setting the 'soft-float'
+ attribute for the objects in post/lib_ppc/fpu. And this patch does
+ this.
+
+ Also, to avoid passing both soft- and hard-float options in CFLAGS
+ when compiling the files from post/lib_ppc/fpu (which is OK, but
+ looks rather dirty) this patch removes the soft-float string from
+ CFLAGS in post/lib_ppc/fpu/Makefile.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit a7c9310457e85b4598abe5b304108edf11332e2f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Dec 17 16:36:22 2008 -0600
+
+ Add support for Maxim's DS4510 I2C device
+
+ Initial support for the DS4510, a CPU supervisor with
+ integrated EEPROM, SRAM, and 4 programmable non-volatile
+ GPIO pins. The CONFIG_DS4510 define enables support
+ for the device while the CONFIG_CMD_DS4510 define
+ enables the ds4510 command. The additional
+ CONFIG_DS4510_INFO, CONFIG_DS4510_MEM, and
+ CONFIG_DS4510_RST defines add additional sub-commands
+ to the ds4510 command when defined.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit b6fc6fd49a84543e1324e1620b9f301ff7c1f27f
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Tue Dec 16 14:51:56 2008 +0100
+
+ common: Iteration limit for memory test.
+
+ The iteration limit is passed to mtest as a fourth parameter:
+ [start [end [pattern [iterations]]]]
+ If no fourth parameter is supplied, there is no iteration limit and the
+ test will loop forever.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+
+commit 97cae3a4c68d856374ccc70fd2c5f8714cc94f7d
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Dec 15 15:40:12 2008 +0100
+
+ serial: Rename driver vcth to vct to support other board variants
+
+ Moved driver vcth.c to vct.c to better reflect the VCT board series.
+ This driver is now used by the VCT platforms:
+
+ vct_premium
+ vct_platinum
+ vct_platinumsvc
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 36ede4d63e59c9277ec180b09c39b8bf46425ba2
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Fri Dec 12 00:45:27 2008 +0900
+
+ nios: Move README.nios_CONFIG_SYS_NIOS_CPU to doc/ dir
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit c3284b030b1cd492b4f46c576aea01bef258599d
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Wed Dec 10 16:24:16 2008 +0100
+
+ common/main: support bootdelay=0 for CONFIG_AUTOBOOT_KEYED
+
+ Support bootdelay=0 in abortboot for the CONFIG_AUTOBOOT_KEYED case
+ similar to the CONFIG_ZERO_BOOTDELAY_CHECK support for the
+ !CONFIG_AUTOBOOT_KEYED case.
+
+ Do this by reversing the loop so we do at least one iteration before
+ checking for timeout.
+
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+
+commit 94f9279f7bbdc01bbc7cf85aedf9b545943b94c3
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Dec 8 17:24:08 2008 +0100
+
+ Added legacy flash ST Micro M29W040B
+
+commit 626d07348e5f9f302f4ea182161a89f7362a0488
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Mon Dec 8 20:04:51 2008 +1100
+
+ Fixed off-by-one errors in lib_m68k/interrupts.c
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit a5989c42ae5e295f274a795c426c47819bbdbfda
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:05 2008 +1100
+
+ Removed all references to CONFIG_SYS_RESET_GENERIC
+
+ Generic i386 reset - #define made redundant by weak function
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 2b5360eb2bc0b741ae5cb3c84d35ccdd17667c8a
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:04 2008 +1100
+
+ Remove #ifdef CONFIG_SC520 in source code
+
+ CONFIG_SC520 is now used for conditional compile
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit ead056bc206f6b7ee6dc98766678b64635ea20b8
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:03 2008 +1100
+
+ Added MMCR reset functionality
+
+ Reset function specific to AMD SC520 microcontroller - Is more of a
+ 'hard reset' that the triple fault.
+
+ Requires CONFIG_SYS_RESET_SC520 to be defined in config
+
+ I would have liked to add this to a new file (cpu/i386/sc520/reset.c)
+ but ld requires that a object file in a library arhive MUST contain
+ at least one function which does not override a weak function (and is
+ called from outside the object file) in order for that object file to
+ be extracted from the archive. This would be the only function on the
+ new file, and hence, will never get linked in.
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 3f5f18d12d32ee0661bf51dfc55752c005230d6e
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:02 2008 +1100
+
+ Moved generic (triple fault) reset code
+
+ Moved from interrupts.c to cpu.c and made into a weak function to
+ allow vendor specific override
+
+ Vendor specific CPU reset (like the AMD SC520 MMCR reset) can now be
+ added to the vendor specific code without the need to remember to
+ #undef usage of the generic method and if you forget to include your
+ custom reset method, you will always get the default.
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 9933d609020c297788f53f334c8465fa7a99b10c
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:01 2008 +1100
+
+ Moved definition of set_vector() to new header file
+
+ This allows for future tidy ups and functionality that will require
+ set_vector ()
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 407976185e0dda2c90e89027121a1071b9c77bfb
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:00 2008 +1100
+
+ Moved sc520 specific code into new cpu/i386/sc520 folder
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 85ffbbd51914925a542d8528be7f072e5ab02157
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:28:58 2008 +1100
+
+ Renamed cpu/i386/reset.S to resetvec.S
+
+ Brings i386 in line with other CPUs with a reset vector and frees up reset.c
+ for CPU reset functions
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit a3f4c123f569474e80ea012b8db0de46afdb6443
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jan 24 01:01:49 2009 +0100
+
+ Makefile: keep lists sorted.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c620c01e96814558470698ed5cab1bf2f504d1b5
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:28:57 2008 +1100
+
+ Added initial eNET board support
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 0c0ccf401ee03a5008fc2c19b05a662bce1a1086
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Thu Nov 20 11:37:26 2008 +0100
+
+ POWERPC 82xx: add the SCC as an HDLC controller
+
+ Right now this is only used by keymile.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 1e8f4e78ca393b3d8e86bd8055758dd465d9113f
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Nov 20 09:59:09 2008 +0100
+
+ powerpc, keymile boards: extract identical config options
+
+ This patch extracts the identical config options for the
+ keymile boards mgcoge, mgsuvd and kmeter1 in a new
+ common config file keymile-common.h.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 210c8c00aad3328145204adab434bb7d70b06b75
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Nov 21 08:29:40 2008 +0100
+
+ powerpc: keymile: Add a check for the PIGGY debug board
+
+ Check the presence of the PIGGY on the keymile boards mgcoge,
+ mgsuvd and kmeter1. If the PIGGY is not present, dont register
+ this Ethernet device.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit de0443614af4d16675ab436665aeb11ddc9f7214
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Nov 20 09:57:47 2008 +0100
+
+ powerpc: 83xx: add support for the kmeter1 board
+
+ This patch adds support for the kmeter1 board from Keymile,
+ based on a Freescale MPC8360 CPU.
+
+ - serial console on UART 1
+ - 256 MB DDR2 RAM
+ - 64 MB NOR Flash
+ - Ethernet RMII Mode over UCC4
+ - PHY SMSC LAN8700
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3feb647f3fd0881382c7a29f4cf280b66473ae0a
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Tue Nov 4 13:51:18 2008 +0100
+
+ Add a do_div() wrapper macro, lldiv().
+
+ Add a do_div() wrapper, lldiv(). The new inline function doesn't modify
+ the dividend and returns the result of division, so it is useful
+ in complex expressions, i.e. "return(a/b)" -> "return(lldiv(a,b))"
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 18af1c5f0f7402dc0d6a71b012c68025dd97cf72
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jan 23 14:22:14 2009 -0600
+
+ 85xx: Add a 36-bit physical configuration for MPC8572DS
+
+ We move all IO addressed (CCSR, localbus, PCI) above the 4G boundary
+ to allow for larger memory sizes.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c51fc5d53c4560abc4d0a6126c06fc68133d1528
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jan 23 14:22:13 2009 -0600
+
+ 85xx: Handle eLBC difference w/36-bit physical
+
+ The eLBC only handles 32-bit physical address in systems with 36-bit
+ physical. The previos generation of LBC handled 34-bit physical
+ address in 36-bit systems. Added a new CONFIG option to convey
+ the difference between the LBC and eLBC.
+
+ Also added defines for XAM bits used in LBC for the extended 34-bit
+ support.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 72a9414a8e21e9536822c7353bc08d21ce5ad53d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jan 23 14:22:12 2009 -0600
+
+ 85xx: Use BR_ADDR macro for NAND chipselects
+
+ Use the new BR_ADDR macro to properly setup the address field of the
+ localbus chipselects used by NAND.
+
+ This allows us to deal with 36-bit phys on these boards in the future.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2fc7eb0cfc608c9369001d57a0411af5e6a58f7c
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Jan 15 11:58:35 2009 -0500
+
+ Add secondary CPUs processor frequency for e500 core
+
+ This patch updates e500 freqProcessor to array based on CONFIG_NUM_CPUS,
+ and prints each CPU's frequency separately. It also fixes up each CPU's
+ frequency in "clock-frequency" of fdt blob.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit bf5b1f0c0d28ce062e1d368680632dfb099de692
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 21 16:31:53 2008 +0800
+
+ 85xx: enable the auto self refresh for wake up ARP
+
+ The wake up ARP feature need use the memory to process
+ wake up packet, we enable auto self refresh to support it.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit b4983e16d150ab7d039704c310aacbd2f4dc1e0f
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 21 16:31:43 2008 +0800
+
+ fsl-ddr: use the 1T timing as default configuration
+
+ For light loaded system, we use the 1T timing to gain better
+ memory performance, but for some heavily loaded system,
+ you have to add the 2T timing options to board files.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 22cca7e1cd54590e967c73558b07ffbdccd39504
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 21 16:31:35 2008 +0800
+
+ fsl-ddr: make the self refresh idle threshold configurable
+
+ Some 85xx processors have the advanced power management feature,
+ such as wake up ARP, that needs enable the automatic self refresh.
+
+ If the DDR controller pass the SR_IT (self refresh idle threshold)
+ idle cycles, it will automatically enter self refresh. However,
+ anytime one transaction is issued to the DDR controller, it will
+ reset the counter and exit self refresh state.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 22ff3d01348e0a2dc369b7efcbac30e4ce86d178
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 21 16:31:29 2008 +0800
+
+ fsl-ddr: clean up the ddr code for DDR3 controller
+
+ - The DDR3 controller is expanding the bits for timing config
+ - Add the DDR3 32-bit bus mode support
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 80ee3ce6d7fe9441b4352d7cfaf6afc2507b1106
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 21 16:31:22 2008 +0800
+
+ fsl-ddr: update the bit mask for DDR3 controller
+
+ According to the latest 8572 UM, the DDR3 controller
+ is expanding the bit mask, and we use the extend ACTTOPRE
+ mode when tRAS more than 19 MCLK.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit aca5f018a8386b85469482ed9867e3e29a2437d0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 16:08:40 2008 -0600
+
+ 85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boards
+
+ Introduce a new define to seperate out the virtual address that PCI
+ IO space is at from the physical address. In most situations these are
+ mapped 1:1. However any code accessing the bus should use VIRT.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 5af0fdd81c3370c3a51421208fda568bdcbbec23
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 16:08:39 2008 -0600
+
+ 85xx: Introduce CONFIG_SYS_PCI*_MEM_VIRT for FSL boards
+
+ Introduce a new define to seperate out the virtual address that PCI
+ memory is at from the physical address. In most situations these are
+ mapped 1:1. However any code accessing the bus should use VIRT.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit a6e04c344ad1eefd47a75484441b385da815b8df
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 16:08:38 2008 -0600
+
+ 85xx: Use CONFIG_SYS_{PCI*,RIO*}_MEM_PHYS for physical address on FSL boards
+
+ Use the _MEM_PHYS defines instead of _MEM_BUS for LAW and real address fields
+ of TLBs. This is what we should have always been using from the start.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 5f91ef6acdbadec33e0192049e2b24a1d9692f1d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 16:08:37 2008 -0600
+
+ 85xx: Convert CONFIG_SYS_PCI*_IO_BASE to _IO_BUS for FSL boards
+
+ Use CONFIG_SYS_PCI*_IO_BUS for the bus relative address instead
+ of _IO_BASE so we are more explicit.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 10795f42cb94e71bcb262b615084f69dd886399a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 16:08:36 2008 -0600
+
+ 85xx: Convert CONFIG_SYS_{PCI*,RIO*}_MEM_BASE to _MEM_BUS for FSL boards
+
+ Use CONFIG_SYS_{PCI,RIO}_MEM_BUS for the bus relative address instead
+ of _MEM_BASE so we are more explicit.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit c953ddfd56b3ae3f28910fe3aed6de6968d1c9aa
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 14:19:34 2008 -0600
+
+ 85xx: separate FLASH BASE virtual from physical address
+
+ Added a CONFIG_SYS_FLASH_BASE_PHYS for use as the physical address and
+ maintain CONFIG_SYS_FLASH_BASE as the virtual address of the flash.
+
+ This allows us to deal with 36-bit phys on these boards in the future.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 52b565f5ad23b682489055b187767d8bf1c2e444
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 14:19:33 2008 -0600
+
+ 85xx: separate PIXIS virtual from physical address
+
+ Added a PIXIS_BASE_PHYS for use as the physical address and maintain
+ PIXIS_BASE as the virtual address of the PIXIS fpga registers.
+
+ This allows us to deal with 36-bit phys on these boards in the future.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 30837e5b21d5a742983581ab9ee3fac085311d19
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue Nov 11 08:52:09 2008 -0500
+
+ Add README file for MPC8572DS board
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 6dadc9195ad642cc662632f4d92f92d3d71e8bf2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 20 16:15:04 2008 -0400
+
+ Blackfin: use common strmhz() in system output
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5bb907a4925397789c90d074f4f7e92ce6b39402
+Author: Ron Madrid <ron_madrid@sbcglobal.net>
+Date: Thu Jan 22 15:05:24 2009 -0800
+
+ mpc83xx: New board support for SIMPC8313
+
+ This patch will create a new board, SIMPC8313, from Sheldon Instruments. This
+ board boots from NAND devices and is configureable for either large or small
+ page devices. The board supports non-soldered DDR2, one ethernet port, a
+ Marvell 88E1118 PHY, and PCI host support. The board also has a FPGA connected
+ to the eLBC providing glue logic to a TMS320C67xx DSP.
+
+ Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d4bade8d77aa20e2846fa4accff0e7fa7961a134
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jan 18 19:46:06 2009 -0500
+
+ nand: fixup printf modifiers to match types used
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 389e6620e2271096df3316917528003627db4021
+Author: Schlaegl Manfred jun <manfred.schlaegl@gmx.at>
+Date: Tue Jan 20 16:57:55 2009 +0100
+
+ nand read.jffs2 (nand_legacy) in common/cmd_nand.c
+
+ Error with CONFIG_NAND_LEGACY in common/cmd_nand.c:
+ With current code "nand read.jffs2s" (read and skip bad blocks) is always interpreted as
+ "nand read.jffs2" (read and fill bad blocks with 0xff). This is because ".jffs2" is
+ tested before ".jffs2s" and only the first two characters are compared.
+
+ Correction:
+ Test for ".jffs2s" first and compare the first 7 characters.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 6c869637fef31e66380f0ea1d49690a2e26ec0d7
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Fri Jan 16 18:55:54 2009 +0100
+
+ NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
+
+ This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and
+ changes the default from 8 to 1 for the legacy and the new MTD
+ NAND layer. This allows to remove all NAND_MAX_CHIPS definitions
+ in the board config files because none of the boards use multi
+ chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440
+ define
+
+ #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
+
+ but that's bogus and did not work anyhow.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c70564e6b1bd08f3230182392238907f3531a87e
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Dec 2 11:48:51 2008 +0800
+
+ NAND: Fix cache and memory inconsistency issue
+
+ We load the secondary stage u-boot image from NAND to
+ system memory by nand_load, but we did not flush d-cache
+ to memory, nor invalidate i-cache before we jump to RAM.
+ When the system has cache enabled and the TLB/page attribute
+ of system memory is cacheable, it will cause issues.
+
+ - 83xx family is using the d-cache lock, so all of d-cache
+ access is cache-inhibited. so you can't see the issue.
+ - 85xx family is using d-cache, i-cache enable, partial
+ cache lock. you will see the issue.
+
+ This patch fixes the cache issue.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 50657c273278f74378e1ac39b41d612b92fdffa0
+Author: Nishanth Menon <menon.nishanth@gmail.com>
+Date: Sat Dec 13 09:43:06 2008 -0600
+
+ NAND: Enable nand lock, unlock feature
+
+ Enable nand lock, unlock and status of lock feature.
+ Not every device and platform requires this, hence,
+ it is under define for CONFIG_CMD_NAND_LOCK_UNLOCK
+
+ Nand unlock and status operate on block boundary instead
+ of page boundary. Details in:
+ http://www.micron.com/products/partdetail?part=MT29C2G24MAKLAJG-6%20IT
+
+ Intial solution provided by Vikram Pandita <vikram.pandita@ti.com>
+ Includes preliminary suggestions from Scott Wood
+
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 69fb8be4fc07162fdf6edf04bdc7233b0e9a920e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Dec 6 02:40:55 2008 -0500
+
+ NAND: move board_nand_init to nand.h
+
+ Rather than putting the function prototype for board_nand_init() in the one
+ place where it gets called, put it into nand.h so that every place that also
+ defines it gets the prototype. Otherwise, errors can go silently unnoticed
+ such as using the wrong return value (void rather than int) when defining
+ the function.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 1ae39862044ebb1e682234b51f94421e3f871d6a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 2 11:06:47 2008 +0100
+
+ OneNAND: Additional sync with 2.6.27
+
+ - Add subpage write support
+ - Add onenand_oob_64/32 ecclayout
+
+ This has been missing and without it UBI has some incompatibilies issues
+ with the current (>= 2.6.27) Linux kernel version. vid_hdr_offset is
+ placed differently (2048 instead of 512) without this fix.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 1714f51a2009baaecf3d4f6e3bd8c4e93a8d3f23
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Thu Nov 13 15:14:33 2008 +0900
+
+ Add markbad function
+
+ Add missing markbad function
+ If not, it's hang when it entered the mtd->mark_bad().
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit c438ea175d8d002c1063b7a94b0c0e26668d1ac9
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 12 13:47:24 2008 +0100
+
+ OneNAND: Bad block aware read/write command support
+
+ Update OneNAND command to support bad block awareness.
+ Also change the OneNAND command style to better match the
+ NAND version.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 8cf11f3aa78673730e9ecbbe4b75213b53f212c8
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 11 10:29:09 2008 +0100
+
+ OneNAND: Save version_id in onenand_chip struct
+
+ The version (ver_id) was not stored in the onenand_chip structure and
+ because of this the continuous locking scheme could be enabled on some
+ chips.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4fca3310d611cc0f51d7295ef3557afbdbd91dc3
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 11 10:28:53 2008 +0100
+
+ OneNAND: Fix compiler warnings
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1ac5744e33ee0aa6d6ddab3b99f9e70953156e69
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Nov 4 14:55:06 2008 +0800
+
+ mpc83xx: enable eLBC NAND support for MPC8315ERDB board
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit ef0921d6b05aeb9034158f9bef5323d6da9c925e
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Nov 4 09:24:07 2008 +0900
+
+ Sync with 2.6.27
+
+ Sync with OneNAND kernel codes
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit e7f325be9edeb84bb457301776bbac1f7257dafc
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jan 5 13:35:31 2009 +0100
+
+ microblaze: Use cache functions (especially cache status)
+ in systems which are configured without flash
+
+commit e9b737deb2c30125362d20e24170617476026e94
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jan 5 13:29:32 2009 +0100
+
+ microblaze: Add cache flush
+
+commit b4f8dda35bfad447b4106828232705b2e878d168
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jan 5 13:28:40 2009 +0100
+
+ microblaze: Add bootup messages to board.c
+
+commit 330e55459bc9983341da6c1d5c7fe00a664436fe
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Dec 19 13:25:55 2008 +0100
+
+ microblaze: Change microblaze-generic config file
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 52a822ed9c37a2ea0ed112a26d8ff5a6cb1c6f10
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Dec 19 13:14:05 2008 +0100
+
+ microblaze: Rename ml401 to microblaze-generic
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 6677876181cc8772bca8a372479a500d160f3993
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Jan 20 11:56:11 2009 -0600
+
+ 83xx: Use the proper sequence for updating IMMR.
+
+ This ensures that subsequent accesses properly hit the new window.
+
+ The dcbi during the NAND loop was accidentally working around this;
+ it's no longer necessary, as the cache is not enabled.
+
+ Reported-by: Suchit Lepcha <Suchit.Lepcha@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8b34557c546e5e9f34ebf83c93413dad973d93df
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Jan 8 04:26:19 2009 +0300
+
+ mpc83xx: Add PCI-E support for MPC837XEMDS boards
+
+ MPC837XEMDS boards can support PCI-E via "PCI-E riser card". The card
+ provides two PCI-E (x2) ports. Though, only one port can be used in x2
+ mode. Two ports can function simultaneously in x1 mode.
+
+ PCI-E x1/x2 modes can be switched via "pex_x2" environment variable.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8f11e34b31a7be124a3239653f33af9510502045
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Jan 8 04:26:17 2009 +0300
+
+ mpc83xx: Add PCI-E support for MPC8315ERDB boards
+
+ MPC8315ERDB boards features PCI-E x1 and Mini PCI-E x1 ports. Let's
+ support them.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit fd6646c0b9ebe7e5afc4ae4c78097d9cd317a5e8
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Jan 8 04:26:12 2009 +0300
+
+ mpc83xx: Add support for MPC83xx PCI-E controllers
+
+ This patch adds support for MPC83xx PCI-E controllers in Root Complex
+ mode.
+
+ The patch is based on Tony Li and Dave Liu work[1].
+
+ Though unlike the original patch, by default we don't register PCI-E
+ buses for use in U-Boot, we only configure the controllers for future
+ use in other OSes (Linux). This is done because we don't have enough
+ of spare BATs to map all the PCI-E regions.
+
+ To actually use PCI-E in U-Boot, users should explicitly define
+ CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES symbol in the board file. And
+ only then U-Boot will able to access PCI-E, but at the cost of disabled
+ address translation.
+
+ [1] http://lists.denx.de/pipermail/u-boot/2008-January/027630.html
+
+ Signed-off-by: Tony Li <tony.li@freescale.com>
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 88ecf55cabd7aea28fe8093720e208f53ccfdcf5
+Author: Ira Snyder <iws@ovro.caltech.edu>
+Date: Mon Jan 12 13:33:17 2009 -0800
+
+ MPC8349EMDS: do not setup unused PCI clock outputs in PCI agent mode
+
+ When running in PCI agent mode, the PCI_CLK_OUT signals are not used, so do
+ not enable them. See the MPC8349EA Reference Manual, Section 4.4.2
+ "Clocking in PCI Agent Mode".
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 75f35209f702bb26826855ed8c8e4d108ab5f412
+Author: Ira Snyder <iws@ovro.caltech.edu>
+Date: Mon Jan 12 13:32:26 2009 -0800
+
+ 83xx: PCI agent mode fixes for multi-board systems
+
+ When running a system with 2 or more MPC8349EMDS boards in PCI agent mode,
+ the boards will lock up the PCI bus by scanning against each other.
+
+ The boards lock against each other by trying to access the PCI bus before
+ clearing their configuration lock bit. Both boards end up in a loop,
+ sending and receiving "Target Not Ready" messages forever.
+
+ When running in PCI agent mode, the scanning now takes place after the
+ boards have cleared their configuration lock bit.
+
+ Also, add a missing declaration to the mpc83xx.h header file, fixing a
+ build warning.
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 455a46915b82896cc2070eb326d075555c2bc580
+Author: Ron Madrid <ron_madrid@sbcglobal.net>
+Date: Fri Dec 12 13:12:45 2008 -0800
+
+ mpc83xx: Size optimization of start.S
+
+ Currently there are in excess of 100 bytes located at the beginning of the image
+ built by start.S that are not being utilized. This patch moves a few functions
+ into this part of the image. This will create a greater number of *available*
+ bytes that can be used by board specific code in NAND builds and will decrease
+ the size of the assembled code in other builds.
+
+ Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 72d15e705bc3983884105cb7755c7ba80e74a0a5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 21 23:08:12 2009 +0100
+
+ Prepare v2009.01
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 635e5f8fc82365e6e9734b3132bc95135a6de679
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jan 18 21:37:48 2009 +0100
+
+ Prepare 2009.01-rc3
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4cda437898f7873752f0201757cd33f12196ce87
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Jan 17 13:32:42 2009 -0500
+
+ build system: treat all Darwin's alike
+
+ The x86 based version of Darwin behaves the same quirky way as the powerpc
+ Darwin, so only check HOSTOS when setting up Darwin workarounds.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c088a108c75db565e07292fd668dfa5491e85bc2
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Wed Jan 14 13:52:24 2009 +0100
+
+ fdt_resize(): fix actualsize calculations with unaligned blobs
+
+ The code in fdt_resize() to extend the fdt size to end on a page boundary
+ is wrong for fdt's not located at an address aligned on a page boundary.
+ What's even worse, the code would make actualsize shrink rather than grow
+ if (blob & 0xfff) was bigger than the amount of padding added by ALIGN(),
+ causing fdt_add_mem_rsv to fail.
+
+ Fix it by aligning end address (blob + size) to a page boundary instead.
+ For aligned fdt's this is equivalent to what we had before.
+
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+
+commit fadad1573fb16c90025f08a2861d6047d093cba7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Jan 9 04:38:17 2009 -0500
+
+ ncb: use socklen_t
+
+ The recvfrom() function takes a socklen_t, not an int.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fc83c9273cec6e6e542f4a0ea3b653b7d0513ffa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jan 11 16:35:16 2009 +0100
+
+ sh: serial: use readx/writex accessors
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 9e1fa628bdb64745811cdd26c4f953846c076180
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jan 11 16:35:15 2009 +0100
+
+ sh: serial: coding style cleanup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c9935c992575922b7ef13eec0656ed8665d324e3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Jan 11 17:48:56 2009 +0900
+
+ sh: Fix compile error on lowlevel_init file
+
+ lowlevel_init of SH was corrected to use the write/readXX macro.
+ However, there was a problem that was not able to be compiled partially.
+ This patch corrected this.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit a5b04d00bfeb940c62232972ce644d50b45797f9
+Author: Kieran Bingham <kieranbingham@gmail.com>
+Date: Tue Dec 30 01:16:03 2008 +0000
+
+ sh: Fix up rsk7203 target for out of tree build
+
+ Fix up rsk7203 target to build successfully using out-of-tree build.
+
+ Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f7e78f3b74aae9caca2997bad865a72338326c0a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 20 19:29:49 2008 +0100
+
+ sh: use write{8,16,32} in all lowlevel_init
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit e4430779623af500de1cee7892c379f07ef59813
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 20 19:29:48 2008 +0100
+
+ sh: lowlevel_init coding style cleanup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 85cb052ee41675ca361e6a4c69455dc715c8f2d9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 20 15:27:45 2008 +0100
+
+ sh: update sh2/sh2a timer coding style
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1e15ff999322e81af4c0c0c548908f38944ba39c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 20 15:25:22 2008 +0100
+
+ sh: update sh timer coding style
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0e3ece33801e377be67ffa29f083421ad820f28b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 14 23:26:05 2009 +0100
+
+ Prepare 2009.01-rc2
+
+ Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e92c9a860e44c14513c8909ce4299e253a775eeb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 14 22:35:30 2009 +0100
+
+ cpu/mpc824x/Makefile: fix warning with parallel builds
+
+ Parallel builds would occasionally issue this build warning:
+
+ ln: creating symbolic link `cpu/mpc824x/bedbug_603e.c': File exists
+
+ Use "ln -sf" as quick work around for the issue.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3ba605d4beec649438539e7df97b5fedb26592fb
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 12:18:49 2009 +0100
+
+ ppc4xx: Add loadpci command to esd's CPCI4052 and CPCI405AB boards
+
+ This patch adds esd's loadpci BSP command to CPCI4052 and
+ CPCI405AB board. This requires CONFIG_CMD_BSP and CONFIG_PRAM.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 600fe46fb3dab7f07604f9009904f31584415114
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 12:18:12 2009 +0100
+
+ ppc4xx: Disable pci node in device tree on CPCI405 pci adapters
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f6a1f490d224c600a09137e58d1026d150b8e679
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 12:17:36 2009 +0100
+
+ ppc4xx: Cleanup CPCI405 board code
+
+ This patch cleans up CPCI405 board support:
+ - wrap long lines
+ - unification of spaces in function calls
+ - remove dead code
+
+ Use correct io accessors on peripherals.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fceebb45a0b97e92f9889861f8c3b9cb885e706f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 12:16:35 2009 +0100
+
+ ppc4xx: Enable auto RS485 mode on PLU405 boards
+
+ This patch turns on the auto RS485 mode in the 2nd external
+ uart on PLU405 boards. This is a special mode of the used
+ Exar XR16C2850 uart. Because these boards only have a 485 physical
+ layer connected it's a good idea to turn it on by default.
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b5f65dfa9aa8e068e62aba4733dc4fd97b1d9bf6
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue Jan 13 16:29:28 2009 -0500
+
+ Some changes of TLB entry setting for MPC8572DS
+
+ - Move the TLB entry of PIXIS_BASE from TLB0 to TLB1[8], because in CAMP mode,
+ all the TLB0 entries will be invalidated after cpu1 brings up kernel, thus cpu0
+ can not access PIXIS_BASE anymore (any access will cause DataTLBError exception)
+
+ - Set CONFIG_SYS_DDR_TLB_START to 9 for MPC8572DS board.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 950264317eb9594b2b5ee2fb65206200a1c6007a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue Jan 13 16:29:22 2009 -0500
+
+ Change DDR tlb start entry to CONFIG param for 85xx
+
+ So that we can locate the DDR tlb start entry to the value other than 8. By
+ default, it is still 8.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 6d3a10f73ece7ffb736890c10e023222612a4aa0
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Fri Jan 9 16:02:35 2009 +0800
+
+ Change PCIE1&2 deciide logic on MPC8544DS board more readable
+
+ The IO port selection for MPC8544DS board:
+ Port cfg_io_ports
+ PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7
+ PCIE2 0x4, 0x5, 0x6, 0x7
+ PCIE3 0x6, 0x7
+ This patch changes the PCIE12 and PCIE2 logic more readable.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 028e116811d28a031660f1ad9e20ac1293b3c5c7
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Fri Jan 9 16:01:52 2009 +0800
+
+ PCIE2 and PCIE3 are decided by corresponing bit in devdisr instead of PCIE1 bit
+
+ PCIE2 and PCIE3 should be decided by corresponing bit in devdisr instead of
+ PCIE1 bit.
+ On MPC8572DS board, PCIE refers to PCIE1.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 9afc2ef0307aecf52482df67c31b75d5f9e66b47
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Fri Jan 9 16:00:55 2009 +0800
+
+ Fix IO port selection issue on MPC8544DS and MPC8572DS boards
+
+ The IO port selection is not correct on MPC8572DS and MPC8544DS board.
+ This patch fixes this issue.
+ For MPC8572
+ Port cfg_io_ports
+ PCIE1 0x2, 0x3, 0x7, 0xb, 0xc, 0xf
+ PCIE2 0x3, 0x7
+ PCIE3 0x7
+
+ For MPC8544
+ Port cfg_io_ports
+ PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7
+ PCIE2 0x4, 0x5, 0x6, 0x7
+ PCIE3 0x6, 0x7
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 3e3fffe3baf3befde287fec1fcbfe55052fb8946
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Wed Dec 3 22:36:44 2008 -0600
+
+ mpc8610hpcd: Fix PCI mapping concepts
+
+ Rename _BASE to _BUS, as it's actually a PCI bus address,
+ separate virtual and physical addresses into _VIRT and _PHYS,
+ and use each appopriately. This makes the code easier to read
+ and understand, and facilitates mapping changes going forward.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 79e436cad3b4a7db88408c3f05175028f30d700d
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Wed Dec 3 22:36:26 2008 -0600
+
+ sbc8641d: Fix PCI mapping concepts
+
+ Rename _BASE to _BUS, as it's actually a PCI bus address,
+ separate virtual and physical addresses into _VIRT and _PHYS,
+ and use each appopriately. This makes the code easier to read
+ and understand, and facilitates mapping changes going forward.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit a9f3acbcd07da72b5446ce557531a3ed8b8beff0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jan 12 14:50:35 2009 +0100
+
+ MPC86xx: fix build warnings
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 032a1c934ef4dc003281f57302b6e693062c1868
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Jan 5 16:09:44 2009 -0500
+
+ bf537-stamp/nand: fix board_nand_init prototype
+
+ The board_nand_init() function should return an int, not void.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 687f952e4119594ab913be11c90f7f018c2a7a79
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 11 07:04:48 2008 -0500
+
+ Blackfin: drop CONFIG_SPI handling in board init
+
+ The eeprom SPI init functions are duplicated as the common code already
+ executes these for us.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e7e684b10d73a303902208594c7c3e7e0d753282
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Oct 24 17:51:57 2008 -0400
+
+ Blackfin: fix out-of-tree building with ldscripts
+
+ Many of the Blackfin board linker scripts are preprocessed, so make sure we
+ output the linker script into the build tree rather than the source tree.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b9eecc342f767b50e1476fbc1aad7d88dd4ce5eb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Oct 24 17:48:54 2008 -0400
+
+ Blackfin: fix linker scripts to work with --gc-sections
+
+ Make sure all .text sections get pulled in and the entry point is properly
+ referenced so they don't get discarded when linking with --gc-sections.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 509fc553bc6087a6f705b3bf52f3950d7d1eaa58
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 20:45:44 2008 -0400
+
+ Blackfin: set proper LDRFLAGS for parallel booting LDRs
+
+ In order to boot an LDR out of parallel flash, the ldr utility needs a few
+ flags to tell it to generate the right header.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3dd9395a0d7ce69a335d0e743c04b9caedd681d3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Jan 6 21:41:59 2009 +0100
+
+ at91rm9200: move define from lowlevel_init to header
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8a48686fac2030287765f1970ea046bd5734b733
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 3 17:22:26 2009 +0100
+
+ m501sk: move to the common memory setup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d481c80d78f954133c035dae6c7d22de3625795d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 3 17:22:25 2009 +0100
+
+ at91rm9200: rename lowlevel init value to CONFIG_SYS_
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4e170b16625291aa10d0d9abc3f34e8a5945d157
+Author: Nicolas Ferre <nicolas.ferre@atmel.com>
+Date: Tue Jan 6 21:13:14 2009 +0100
+
+ at91: add at91sam9xeek board support
+
+ At91sam9xe is basically an at91sam9260 with embedded flash. We can manage
+ it as another entry for at91sam9260 in the Makefile.
+
+ Check documentation at :
+ http://www.atmel.com/dyn/products/product_card.asp?part_id=4263
+
+ Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9ffd53db870a7da134f9a1ae76894a6b31237be5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Jan 6 21:15:57 2009 +0100
+
+ fix bmp_logo.h make dependencies to allow parallel build
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e12d9a8fb48d24176efffccc072b445e60a3afe4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 3 17:22:24 2009 +0100
+
+ at91: Fix Atmel's at91sam9 boards out of tree build
+
+ introduced in commit 89a7a87f084c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0668236bafaa1c11c521652a2facebc74beecbf0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 30 22:56:11 2008 +0100
+
+ README: update mailing list name and hits to patch submission.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d9011f9b75561a0bd9254934c2bb2bc799d4f645
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Dec 23 16:32:01 2008 -0600
+
+ 85xx: Enable inbound PCI config cycles for X-ES boards cleanup
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 1f03cbfae221b24ba1341a0a3f62ff01c5c874df
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Dec 23 16:32:00 2008 -0600
+
+ XPedite5200 board support cleanup
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fea91edee8ae0295e3c30b1ff544df51f4d668e1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Dec 2 21:58:04 2008 +0100
+
+ usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit ada591d2a0ecff5f9bc5ed1ebf310f439c3d0a28
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Dec 3 15:16:37 2008 -0800
+
+ mpc8[56]xx: Put localbus clock in sysinfo and gd
+
+ Currently MPC85xx and MPC86xx boards just calculate the localbus frequency
+ and print it out, but don't save it.
+
+ This changes where its calculated and stored to be more consistent with the
+ CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock.
+
+ The localbus frequency is added to sysinfo and calculated when sysinfo is
+ set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are.
+
+ get_clocks() copies the frequency into the global data, as the other
+ frequencies are, into a new field that is only enabled for MPC85xx and
+ MPC86xx.
+
+ checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency
+ from sysinfo, like the other frequencies, instead of calculating it on the
+ spot.
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9863d6aca11405e1e0d8aba2045d78aeec4d4ee7
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Dec 3 15:16:36 2008 -0800
+
+ mpc86xx: Double local bus clock divider
+
+ The local bus clock divider should be doubled for both 8610 and 8641.
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 446c381e3e16f19857b72ea0d06241267b8b9d58
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Dec 3 15:16:35 2008 -0800
+
+ mpc8568: Double local bus clock divider
+
+ The clock divider for the MPC8568 local bus should be doubled, like the
+ other newer MPC85xx chips.
+
+ Since there are now more chips with a 2x divider than a 1x, and any new
+ 85xx chips will probably be 2x, invert the sense of the #if so that it
+ lists the 1x chips instead of the 2x ones.
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit f51f07eb58fad12de9294ba4ee6c09a0ddeaee03
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Dec 16 12:09:27 2008 +0800
+
+ 85xx: Fix the boot window issue
+
+ If one custom board is using the 8MB flash, it is set
+ as FLASH_BASE = 0xef000000, TEXT_BASE = 0xef780000.
+ The current start.S code will be broken at switch_as.
+
+ It is because the TLB1[15] is set as 16MB page size,
+ EPN = TEXT_BASE & 0xff000000, RPN = 0xff000000.
+
+ For the 8MB flash case, the EPN = 0xefxxxxxx,
+ RPN = 0xffxxxxxx. Assume the virt address of switch_as
+ is 0xef7ff18c, the real address of the instruction at
+ switch_as should be 0xff7ff18c. the 0xff7ff18c is out
+ of the range of the default 8MB boot LAW window
+ 0xff800000 - 0xffffffff.
+
+ So when we switch to AS1 address space at switch_as,
+ the core can't fetch the instruction at switch_as any
+ more. It will cause broken issue.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 58da8890d5fbd074746037722a423de9ac408616
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Dec 11 15:47:50 2008 -0500
+
+ sbc8548: use proper PHY address
+
+ The values given for the PHY address were wrong, so the code
+ read no valid PHY ID, and fell through to the generic PHY
+ support, which would work on 1000M but would not auto negotiate
+ down to 100M or 10M.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit ad22f9273c6f24fbfa917e867680e9688e0c59c5
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Dec 11 15:47:51 2008 -0500
+
+ sbc8548: enable command line editing by default.
+
+ Lets make things a bit more user friendly. It isn't 1985 anymore.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit bd93105fa171184a71ca8b22be03dc2705cfbd3f
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Dec 11 15:47:49 2008 -0500
+
+ sbc8548: don't enable the 3rd and 4th eTSEC
+
+ These interfaces don't have usable connectors on the board, so don't
+ bother enumerating or configuring them.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 181a3650113883728927928b3ac81ad6dade4b2c
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Dec 3 10:08:19 2008 -0500
+
+ Set IVPR to kenrel entry point in second core boot page
+
+ Assuming the OSes exception vectors start from the base of kernel address, and
+ the kernel physical starting address can be relocated to an non-zero address.
+ This patch enables the second core to have a valid IVPR for debugger before
+ kernel setting IVPR in CAMP mode. Otherwise, IVPR is 0x0 and it is not a valid
+ value for second core which runs kernel at different physical address other
+ than 0x0.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit a5d212a263c58cc746481bf1fc878510533ce7d6
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Dec 3 15:16:34 2008 -0800
+
+ mpc8xxx: LCRR[CLKDIV] is sometimes five bits
+
+ On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits
+ instead of four.
+
+ In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems. It
+ should be safe as the fifth bit was defined as reserved and set to 0.
+
+ Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV.
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 58ec4866ed916c7e422f5107bb27b0822084728e
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Dec 3 15:16:38 2008 -0800
+
+ mpc8[56]xx: Put localbus clock in device tree
+
+ Export the localbus frequency in the device tree, the same way the CPU, TB,
+ CCB, and various other frequencies are exported in their respective device
+ tree nodes.
+
+ Some localbus devices need this information to be programed correctly, so
+ it makes sense to export it along with the other frequencies.
+
+ Unfortunately, when someone wrote the localbus dts bindings, they didn't
+ bother to define what the "compatible" property should be. So it seems no
+ one was quite sure what to put in their dts files.
+
+ Based on current existing dts files in the kernel source, I've used
+ "fsl,pq3-localbus" and "fsl,elbc" for MPC85xx, which are used by almost all
+ of the 85xx devices, and are looked for by the Linux code. The eLBC is
+ apparently not entirely backward compatible with the pq3 LBC and so eLBC
+ equipped platforms like 8572 won't use pq3-localbus.
+
+ For MPC86xx, I've used "fsl,elbc" which is used by some of the 86xx systems
+ and is also looked for by the Linux code. On MPC8641, I've also used
+ "fsl,mpc8641-localbus" as it is also commonly used in dts files, some of
+ which don't use "fsl,elbc" or any other acceptable name to match on.
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9d94aff699eed38b286814fcbb335f3eb8516a0e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 16 14:59:22 2008 -0600
+
+ NAND FSL elbc: Use virt_to_phys to determine which bank is in use
+
+ The current code that determines which bank/chipselect is used for a
+ given NAND instance only worked for 32-bit addresses and assumed
+ a 1:1 mapping. This breaks in 36-bit physical configs.
+
+ The proper way to handle this is to use the virt_to_phys() and
+ BR_PHYS_ADDR() routinues to match the 34-bit lbc bus address
+ with the the virtual address the NAND code uses.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 77c8115b1f1871811633eae77a5a700fac1f0e50
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 16 14:59:21 2008 -0600
+
+ ppc: Use addrmap in virt_to_phys and map_physmem.
+
+ If we have addr map support enabled use the mapping functions to
+ implement virt_to_phys() and map_physmem().
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ecf5b98c7a6a2e2256dfddd48fab26678dcd6b90
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 16 14:59:20 2008 -0600
+
+ 85xx: Add support to populate addr map based on TLB settings
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 78bbc5ce151c5a484bb51bf1866b4a993ffc16ec
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 13:47:13 2008 -0600
+
+ XPedite5200 board support
+
+ Initial support for Extreme Engineering Solutions XPedite5200 -
+ a MPC8548-based PMC single board computer.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 487dcb4fb89be0992bc06ec1341090017bd9cf2f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Oct 29 12:39:27 2008 -0500
+
+ 85xx: Enable inbound PCI config cycles for X-ES boards
+
+ Update X-ES Freescale boards to allow inbound PCI configuration
+ cycles when configured as agent/endpoint.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit ccf0fdd02b97323f8caae18d06cc9daeac2f192f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Dec 17 16:36:23 2008 -0600
+
+ XPedite5370 board support
+
+ Initial support for Extreme Engineering Solutions XPedite5370 -
+ a MPC8572-based 3U VPX single board computer with a PMC/XMC
+ site.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit e92739d34e2d6b6aca93b2598248210710897ce8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Dec 17 16:36:21 2008 -0600
+
+ Add support for PCA953x I2C gpio devices
+
+ Initial support for NXP's 4 and 8 bit I2C gpio expanders
+ (eg pca9537, pca9557, etc). The CONFIG_PCA953X define
+ enables support for the devices while the CONFIG_CMD_PCA953X
+ define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO
+ define enables an 'info' sub-command which provides summary
+ information for the given pca953x device.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 7a8979591171676417ab36852d8811a8c46accd8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Oct 29 12:39:26 2008 -0500
+
+ pci/fsl_pci_init: Enable inbound PCI config cycles
+
+ Add fsl_pci_config_unlock() function to enable a
+ PCI/PCIe interface configured in agent/endpoint mode to
+ respond to inbound PCI configuration cycles.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 92c78a3bbcb2ce508b4bf1c4a1e0940406a024bb
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Dec 17 16:43:18 2008 +0100
+
+ avr32: Remove second definition of virt_to_phys()
+
+ The second definition introduced by 65e43a1063 conflicts with the
+ existing one.
+
+ Also, convert the existing definition to use phys_addr_t. The volatile
+ qualifier is still needed due to brain damage elsewhere.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit b616f2b545f73757669b37386f0b37bb61fc6797
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 8 22:27:18 2008 +0200
+
+ MIPS: qemu_mips: update doc to generate and to use qemu flash, ide file
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 16cdf816779f5b602a9b3b4d2ea4dea05095c35b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Dec 16 22:10:31 2008 +0100
+
+ MIPS: qemu_mips: update doc to use all disk and boot linux kernel
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 13095b2f07dacb1f863772266c1789d47a523a8a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Dec 16 22:10:30 2008 +0100
+
+ MIPS: qemu_mips: move env storage just after u-boot
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit aced78d852d0b009e8aaa1445af8cb40861ee549
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 23:48:27 2008 +0100
+
+ Prepare 2009.01-rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9e2a79b4c585ad31138fb90b68fd0234d64a8da8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 23:13:46 2008 +0100
+
+ include/configs/at91cap9adk.h: fix typo.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 45ca04f2377361593151d2d4da51f8ba4832d233
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 22:32:25 2008 +0100
+
+ board/trab/memory.c: Fix compile problems.
+
+ Apply changes from commit 44b4dbed to board/trab/memory.c, too.
+
+ Actually we'd need a major cleanup here - as it turns out,
+ board/trab/memory.c is more or less a verbatim copy of
+ post/drivers/memory.c ... but then, trab is EOL anyway,r
+ so this is not worth the effort.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ff49ea8977b56916edd5b1766d9939010e30b181
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Dec 16 14:24:16 2008 -0600
+
+ NAND: Mark the BBT as scanned prior to calling scan_bbt.
+
+ Otherwise, recursion can occur if scan_bbt does not find a bad block
+ table, and tries to write one, and the attempt to erase the BBT area
+ causes a bad block check.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 584eedab66d0828f2d571a24b10526c4e65f547b
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Dec 11 05:51:57 2008 +0300
+
+ jffs2: include <linux/mtd/compat.h> instead of defining own min_t
+
+ Include <linux/mtd/compat.h> header for min_t definition instead of
+ providing our own one. Removes warnings in case of OneNAND support
+ enabled.
+
+ Although I thinks it's a bit silly to include <linux/mtd/compat.h>
+ just for min_t...
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit b1ffecec37b57a59c139042267faac458e5324e9
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Wed Dec 3 23:04:37 2008 -0600
+
+ powerpc: fix io.h build warning with CONFIG_PHYS_64BIT
+
+ Casting a pointer to a phys_addr_t when it's an unsigned long long
+ on a 32-bit system without first casting to a non-pointer type
+ generates a compiler warning. Fix this.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 6cdadcb3f1b6eac4a1c4256acaa1438413f95351
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 16:22:50 2008 +0100
+
+ trab: make trab_fkt standalone code independent of libgcc
+
+ Use our own local functions in lib_arm/ instead.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit aa1bcca3d2e22af4dea9f02132f9b56a30378ded
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 14:44:06 2008 +0100
+
+ post/Makefile: fix dependency problem with parallel builds
+
+ Parallel builds (using "make -jN") would occasionally fail with error
+ messages like
+ ppc_4xxFP-objdump: string.o: File format not recognized
+ or
+ post/libpost.a(cpu.o): In function `cpu_post_test':
+ /home/wd/git/u-boot/work/post/lib_ppc/cpu.c:130: undefined reference to `cpu_post_test_string'
+ or similar. We now make sure to run the 'postdeps" step before
+ attempting to build the specific POST libraries.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4a0f7538c5c0805fd9a791967bbabacc41deadd9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 14:41:02 2008 +0100
+
+ Makefile: fix dependency problem with parallel builds
+
+ Parallel builds (using "make -jN") would occasionally fail with error
+ messages like
+ include/autoconf.mk:212: *** missing separator. Stop.
+ Line numbers and affected boards were changing. Obviously some
+ Makefiles included autoconf.mk while it was still being written to.
+ As a fix, we now write to a temporary file first and then rename it,
+ so that it is really ready to use as soon as it appears.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 455ae7e87f67c44e6aea68865c83acadd3fcd36c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 01:02:17 2008 +0100
+
+ Coding style cleanup, update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 84bc72d90c505fec3ef4b693995407a0bd4064e5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 11 18:39:08 2008 -0500
+
+ spi/stmicro: fix debug() display of cmd
+
+ The stmicro_wait_ready() func tries to show the actual opcode that was sent
+ to the device, but instead it displays the array pointer. Fix it to pull
+ out the opcode from the start of the array.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5b3375ac8c36c29c87abb132fede0509eb21e5c9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 11 06:23:37 2008 -0500
+
+ env_sf: support embedded environments
+
+ If both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE are defined, and the sect
+ size is larger than the env size, then it means the env is embedded in a
+ block. So we have to save/restore the part of the sector which is not the
+ environment. Previously, saving the environment in SPI flash in this
+ setup would probably brick the board as the rest of the sector tends to
+ contain actual U-Boot data/code.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit ecf5f077c8e77454f532eaac3e3afb7cfc48c62d
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Dec 3 11:28:30 2008 -0600
+
+ i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
+
+ All implementations of the functions i2c_reg_read() and
+ i2c_reg_write() are identical. We can save space and simplify the
+ code by converting these functions into inlines and putting them in
+ i2c.h.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e39cd81c44740d7355d277ed3d38536cbe1e003d
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Dec 5 15:36:14 2008 +0800
+
+ lib_ppc: rework the flush_cache
+
+ - It is possible to miss flush/invalidate the last
+ cache line, we fix it at here.
+ - add the volatile and memory clobber.
+
+ They are pointed by Scott Wood.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 63240ba88cd6a220057a0f28e5bf97f5b17ac84b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Dec 13 17:20:28 2008 -0600
+
+ Introduce addr_map library
+
+ Add a library that helps in translating between virtual and physical
+ addresses. This library can be useful as a simple means to implement
+ map_physmem() and virt_to_phys() for platforms that need functionality
+ beyond the simple 1:1 mapping.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 65e43a10631537dcb92c302d36301a12308216c3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Dec 13 17:20:27 2008 -0600
+
+ Introduce virt_to_phys()
+
+ virt_to_phys() returns the physical address given a virtual. In most
+ cases this will be just the input value as the vast majority of
+ systems run in a 1:1 mode.
+
+ However in systems that are not running this way it should report the
+ physical address or ~0 if no mapping exists for the given virtual
+ address.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 45845301af3de8675c1f7bbc815c6de35452605a
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Sun Dec 7 22:12:50 2008 +0100
+
+ POST Make: fix the sub-dir dependencies missing.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 22525779cb51f1bbe4e96fea7b778de1935a5a69
+Author: Martin Michlmayr <tbm@cyrius.com>
+Date: Wed Aug 6 14:44:05 2008 +0300
+
+ Fix a typo in fw_env.config
+
+ Reported-by: Martin Michlmayr <tbm@cyrius.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ba490b7761c62b549c222a9723e532dc801a3899
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 16:22:45 2008 -0600
+
+ Remove unused CONFIG_ADDR_STREAMING defines
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit d16da93430520d3e46c1ab52eedacf36ab7a2311
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Nov 24 11:54:47 2008 -0600
+
+ cmd_mem: Remove unused variable
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 3aed3aa2c128ce9fb39ca3f4e9385a7499e93dbf
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Dec 14 10:29:39 2008 +0100
+
+ Fix new found CFG_
+
+ Also fix some minor typos.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0e0c862efe7279e9609db74d758cd1b84c6c7209
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Sep 19 12:07:34 2008 +0200
+
+ Remove compiler warning: target CPU does not support interworking
+
+ This warning is issued by modern ARM-EABI GCC on non-thumb targets.
+
+ Signed-off-by: Vladimir Panfilov <pvr@emcraft.com>
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit cd6734510a9ff0f41c4a73567d4080ea0033d2c1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Nov 24 13:33:51 2008 +0100
+
+ Fix FIT and FDT support to have CONFIG_OF_LIBFDT and CONFIG_FIT independent
+
+ FDT support is used for both FIT style images and for architectures
+ that can pass a fdt blob to an OS (ppc, m68k, sparc).
+
+ For other architectures and boards which do not pass a fdt blob to an
+ OS but want to use the new uImage format, we just need FIT support.
+
+ Now we can have the 4 following configurations :
+
+ 1) FIT only CONFIG_FIT
+ 2) fdt blob only CONFIG_OF_LIBFDT
+ 3) both CONFIG_OF_LIBFDT & CONFIG_FIT
+ 4) none none
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 19ef4f7a6ef3b725aa9fe4b4f5fb676a84160172
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Dec 10 15:13:32 2008 +0100
+
+ ppc4xx: Disable EEPROM write access on PMC440 boards
+
+ This patch disables EEPROM wrtie access by default on PMC440 board.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 5b67a1439a73ba6c34007d9ff60a2c6aa90265df
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Dec 10 15:12:56 2008 +0100
+
+ ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 71fa0714fe5134bc8718c38d5261d267e88582ba
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 18 16:36:12 2008 +0100
+
+ MIPS: Flush data cache upon relocation
+
+ This patch now adds a flush to the data cache upon relocation. The
+ current implementation is missing this. Only a comment states that it
+ should be done. So let's really do it now.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 44174343688dba32571a34550dba08971c65fef1
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 18 16:36:22 2008 +0100
+
+ MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT
+
+ This patch adds the CONFIG_SKIP_LOWLEVEL_INIT option to start.S. This
+ enables support for boards where the lowlevel initialization is
+ already done when U-Boot runs (e.g. via OnChip ROM).
+
+ This will be used in the upcoming VCTH board support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit db08ecaa6eb8176904b3bae103a85ee8f735dc40
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 12 13:18:02 2008 +0100
+
+ MIPS: Add board_early_init_f() to init_sequence
+
+ This patch adds the board_early_init_f() call to the MIPS init
+ sequence. A weak dummy implementation is also added which can be
+ overridden by a board specific version.
+
+ This will be used by the upcoming VCTH board support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 9d23fc584c4b7b8bb9ecbee48920b1b04b08fa1b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 12 13:18:19 2008 +0100
+
+ MIPS: Add onenand_init() to board.c and move nand_init()
+
+ This patch adds a call to onenand_init() for OneNAND support and moves
+ the nand_init() call to an earlier place, so that the environment can
+ be used from NAND and OneNAND.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit d8bbc51c7ba9b737a20984333d19fe28a3526431
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Dec 9 11:32:46 2008 +0900
+
+ sh: Update sh2/sh2a timer
+
+ Renesas SH2/SH2A timer broken.
+ This patch fix timer function.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit a319f1496210117b73198e3d889ffffaf6825d00
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Dec 5 07:27:37 2008 +0100
+
+ sh: r2dplus fix register access
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 4d4a96055f6917335a89dbdf2e5556fa5ac329f6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Dec 2 07:40:03 2008 +0100
+
+ sh: r2dplus/lowlevel_init: coding style fix
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c54b9a42d8f5ab5b2a039b3a2e6fde8b427745e5
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Nov 25 11:05:19 2008 +0900
+
+ sh: Changed value of CACHE_OC_NUM_ENTRIES and CACHE_OC_WAY_SHIFT
+
+ SH4 is different a value of CACHE_OC_NUM_ENTRIES and
+ CACHE_OC_WAY_SHIFT every CPU.
+ This patch corrects these values.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit e9d5f35497885b3c65d494d09a525d443dcccd3b
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Nov 20 16:44:42 2008 +0900
+
+ sh: Update sh timer function
+
+ Change to write/readX function and fix timer problem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b81786cff476c41e332eaeb679158f6527cd67d4
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Nov 4 11:58:58 2008 +0900
+
+ sh: Migo-R: Update BSC value
+
+ A value of BSC CS4 was wrong, Fixed it.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 5783758fd260a02f44566ad8f29f899565cd0403
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Mon Nov 17 16:52:09 2008 +0900
+
+ sh: Update ms7722se board config
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 15e2697c9f7fb2ba672a1a70f07cd6d9d4e92b51
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Mon Nov 17 16:53:09 2008 +0900
+
+ sh: Update SuperH serial driver
+
+ The address of SCFSR register is wrong at SH7720/SH7721.
+ This patch fix this.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 9a1d3557dcd47365c12eeab584b822e57d994352
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 11 22:20:15 2008 +0100
+
+ sh: fix rsk7203 and MigoR out of tree build
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1951f847f0a851853871b613ad7cf21a5242226c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Dec 10 14:41:25 2008 +0100
+
+ ppc4xx: Update TEXT_BASE for CPCI405 boards
+
+ This patch fixes building U-Boot for CPCI405 boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8c92af7b2fbd60ae87379477f93c7ec9441b7452
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 9 20:08:01 2008 +0100
+
+ ppc4xx: Remove some features from ALPR to fit into 256k again
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3b089e4f889a2902449d55e081c886ae607cae89
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Dec 10 10:32:59 2008 +0100
+
+ UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization
+
+ With this patch we set the type back to NONE upon failing UBI partition
+ initialization. Otherwise further calls to the UBI subsystem would try
+ to really access the non-existing UBI partition.
+
+ Thanks to Michael Lawnick for pointing this out.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 817329351639a8895cd9b87b33aeff043f3d5a44
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Dec 10 10:28:33 2008 +0100
+
+ UBI: Return -ENOMEM upon failing malloc
+
+ Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon
+ failing malloc().
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Dec 9 23:34:15 2008 -0800
+
+ Fix compile error in building MBX860T.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8fab49ea911fe925392fa5afcc9bc7373a3d0cee
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Nov 25 11:42:20 2008 +0100
+
+ microblaze: Remove XUPV2P board
+
+ ---
+
+ Microblaze platforms use generic settings and to have
+ many platforms is confusing that's why I decided to remove this
+ platform from U-BOOT. ml401 tree is sufficient for covering
+ all Microblaze platforms.
+
+ This change will go through microblaze custodian tree.
+
+commit 99ba6f353582720defff6e6e6761dc455a207d31
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Nov 24 18:25:41 2008 +0100
+
+ microblaze: Remove CONFIG_LIBFDT due to error in common files
+
+commit e7d591e823a991513833af7030468409e25a3b13
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Nov 24 11:43:00 2008 +0100
+
+ microblaze: Fix ml401 uart16550 setting
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit c85ff0553a8cfbcca51c15b947e1ed55d3810a39
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Nov 24 11:38:22 2008 +0100
+
+ microblaze: Set up relocation is done
+
+commit bcb6dd9187d4b23c748704767bd12d20c829e996
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 9 23:20:31 2008 -0500
+
+ tools/netconsole: new script for working with netconsole over UDP
+
+ While the doc/README.NetConsole does have a snippet for people to
+ create their own netcat script, it's a lot easier to make a simple
+ dedicated script and tell people to use it.
+
+ Also spruce it up a bit to make it user friendly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8c5170a7d088601d5f30d85093388dab1f1e8ec0
+Author: Sonic Zhang <Sonic.Zhang@analog.com>
+Date: Tue Dec 9 23:20:18 2008 -0500
+
+ fs/fat: handle FAT on SATA
+
+ The FAT file system driver should also handle FAT on SATA devices.
+
+ Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4cd8ed40615a7d741ef2f09ee53779ec6907b8a6
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Dec 9 23:26:31 2008 -0800
+
+ Fix compile error in building MBX860T.
+ Bug was introduced in 9eb79bd8856bcab896ed5e1f1bca159807a124dd
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Mon Nov 24 08:15:02 2008 -0500
+
+ libfdt: Fix redefined uintptr_t warning for USE_HOSTCC
+
+ Compiling U-Boot in an old OS environment (RedHat-7.3 :-) gives the
+ following warnings from FDT:
+
+ include/libfdt_env.h:50: warning: redefinition of 'uintptr_t'
+ /usr/include/stdint.h:129: warning: 'uintptr_t' previously declared here
+
+ Fix: Protect the definition of uintptr_t when compiling on the host
+ system.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 1fc2b165c51d6f40c8d505f1b3eaefdb6599b17b
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sat Nov 22 08:43:29 2008 +1100
+
+ Moved sc520 PCI definitions to stand-alone file
+
+ Signed Off By: Graeme Russ <graeme.russ@gmail.com>
+
+commit 1f5070c0c18fa5684bfce09c8abdf10c04ed48fa
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sat Nov 22 08:43:21 2008 +1100
+
+ Fixed path to sc520 SSI include file
+
+ Signed Off By: Graeme Russ <graeme.russ@gmail.com>
+
+commit d4f70da544c33db3e4fce6473dea4ecca4322545
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Fri Nov 21 06:28:05 2008 +1100
+
+ Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit c034075a713b60e654c64e88e87da29440f31bb4
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 12 13:30:10 2008 +0100
+
+ serial: Add vcth UART driver
+
+ This patch adds the UART driver for the upcoming VCTH board support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 142a80ffc3b537a9c45acd2444a42a77f147c602
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:36 2008 +0300
+
+ jffs2: cache data_crc results
+
+ As we moved data_crc() invocation from jffs2_1pass_build_lists() to
+ jffs2_1pass_read_inode() data_crc is going to be calculated on each
+ inode access. This patch adds caching of data_crc() results. There
+ is no significant improvement in speed (because of flash access
+ caching added in previous patch I think, crc in RAM is really fast)
+ but this patch impacts memory usage -- every b_node structure uses
+ 12 bytes instead of 8.
+
+ Signed-off-by: Alexey Neyman <avn@emcraft.com>
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 9b7076229ec6a958bd835ab70745f7676297ce82
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:35 2008 +0300
+
+ jffs2: summary support
+
+ This patch adds support for reading fs information from summary
+ node instead of scanning full eraseblock.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 70741004dc28946cd82c7af6789c4ddb3fc94526
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:34 2008 +0300
+
+ jffs2: add buffer to cache flash accesses
+
+ With this patch JFFS2 code allocates memory buffer of max_totlen size
+ (size of the largest node, calculated during scan time) and uses it to
+ store entire node. Speeds up loading. If malloc fails we use old ways
+ to do things.
+
+ Signed-off-by: Alexey Neyman <avn@emcraft.com>
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 8a36d31f72411144ac0412ee7e1880e801acd754
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:33 2008 +0300
+
+ jffs2: rewrite jffs2 scanning code based on Linux one
+
+ Rewrites jffs2_1pass_build_lists() function in style of Linux's
+ jffs2_scan_medium() and jffs2_scan_eraseblock().
+ This includes:
+ - Caching flash acceses
+ - Smart dealing with free space
+
+ Signed-off-by: Alexey Neyman <avn@emcraft.com>
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit e0b5532579eda8b4629f1b4f6e49c3cc60f52237
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:32 2008 +0300
+
+ jffs2: add sector_size field to part_info structure
+
+ This patch adds sector_size field to part_info structure (used
+ by new JFFS2 code).
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit f73846956778a7dfee83403ef9747aff77198848
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:31 2008 +0300
+
+ jffs2: fix searching for latest version in jffs2_1pass_list_inodes()
+
+ We need to update i_version inside cycle to find really latest version
+ inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside
+ dump_inode() instead of calling expensive jffs2_1pass_read_inode().
+
+ Signed-off-by: Alexey Neyman <avn@emcraft.com>
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 1113cb764b3da256ef8a1f9539f4efbe221ff3c4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 9 23:13:51 2008 +0100
+
+ evb64260: fix "cast to pointer from integer of different size" warnings
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d2776827315c3d469b8cb4cec14d58877798daa2
+Author: Stefan Althoefer <stefan.althoefer@web.de>
+Date: Sun Dec 7 19:39:11 2008 +0100
+
+ USB: descriptor handling
+
+ Hi,
+
+ I found a bug when working with the u-boot USB subsystem on IXP425 processor
+ (big endian Xscale aka ARMv5).
+ I recognized that the second usb_endpoint_descriptor of the attached memory
+ stick was corrupted.
+
+ The reason for this are the packed structures below (either u-boot and
+ u-boot-usb):
+
+ --------------
+ /* Endpoint descriptor */
+ struct usb_endpoint_descriptor {
+ unsigned char bLength;
+ unsigned char bDescriptorType;
+ unsigned char bEndpointAddress;
+ unsigned char bmAttributes;
+ unsigned short wMaxPacketSize;
+ unsigned char bInterval;
+ unsigned char bRefresh;
+ unsigned char bSynchAddress;
+
+ } __attribute__ ((packed));
+ /* Interface descriptor */
+ struct usb_interface_descriptor {
+ unsigned char bLength;
+ unsigned char bDescriptorType;
+ unsigned char bInterfaceNumber;
+ unsigned char bAlternateSetting;
+ unsigned char bNumEndpoints;
+ unsigned char bInterfaceClass;
+ unsigned char bInterfaceSubClass;
+ unsigned char bInterfaceProtocol;
+ unsigned char iInterface;
+
+ unsigned char no_of_ep;
+ unsigned char num_altsetting;
+ unsigned char act_altsetting;
+ struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
+ } __attribute__ ((packed));
+ ------------
+
+ As usb_endpoint_descriptor is only 7byte in length, the start of all
+ odd ep_desc[] structures is not word aligned. This makes wMaxPacketSize
+ of these structures also not word aligned.
+
+ ARMv5 Architecture however does not support non-aligned multibyte
+ data type (see A2.8 of ARM Architecture Reference Manual).
+
+ Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 4c253fdb2a175ea3472c38a1455a16faa58e81f0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 9 10:27:33 2008 -0600
+
+ drivers/fsl_pci_init: Fix compile warning
+
+ fsl_pci_init.c: In function 'fsl_pci_setup_inbound_windows':
+ fsl_pci_init.c:122: warning: comparison is always true due to limited range of data type
+
+ The check only makes sense if we are CONFIG_PHYS_64BIT
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit dedacc18a8c2b3951581eb721fa055a4e0ac4845
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Dec 7 09:45:35 2008 +0100
+
+ usbtty/omap: update to current API
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit ee2e9ba917a62cc2e3a484bb79c8da0e01cb93ed
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Tue Dec 9 17:52:05 2008 +0100
+
+ video: fix FADS823 and RRvision compiling issues
+
+ Since commit 561858ee building for FADS823 and RRvision
+ doesn't work. Let's include version.h and timestamp.h
+ unconditionally to fix the problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 2d2e05727fe4013f807ffa814dff0e75259a1db4
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 2 10:53:47 2008 +0100
+
+ UBI: Fix size parsing in "ubi create"
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2ee951ba2ac9874d2a93d52e7a187d3184be937e
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 27 14:07:09 2008 +0100
+
+ UBI: Enable re-initializing of the "ubi part" command
+
+ With this patch now, the user can call "ubi part" multiple times to
+ re-connect the UBI device to another MTD partition.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9def12cae33d2d3ea2dd56b197fd3dfb3ad60bf4
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 27 14:05:15 2008 +0100
+
+ MTD: Fix problem based on non-working relocation (list head mtd_partitions)
+
+ Don't use LIST_HEAD() but initialize the struct via INIT_LIST_HEAD() upon
+ first call of add_mtd_partitions(). Otherwise this won't work on platforms
+ where the relocation is broken (like MIPS or PPC).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5e3ab68e9acf9edf304b8aa32ad7e005483a2c47
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Nov 12 17:29:48 2008 -0800
+
+ Section name should be ".data", not "data"
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7fa6a2f3b66579dea8bc1a9177646e1141731b15
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 9 00:39:08 2008 +0100
+
+ MAKEALL: Automatically use parallel builds
+
+ Add logic to the MAKEALL script to determine the number of CPU cores
+ on the system, and run a parallel build if there is more than one.
+ Usually this significantrly accelerates builds.
+
+ Allow to manually adjust the number of parallel make jobs by using
+ the "BUILD_NCPUS" environment variable.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 268405fa7c44156c5192a70779920c70906af8d6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 9 00:24:30 2008 +0100
+
+ vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 153176a9414120ca1736f3cc4951623d6e14e6af
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 11 06:08:59 2008 +0100
+
+ avr32/bootm: remove unused variable 'ret'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 434c51a5e62f608a2a78ed5398ac43a1c77cc183
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Nov 12 13:06:48 2008 -0600
+
+ Remove unneeded CONFIG_SHELL references
+
+ Make should be using the bash shell by default which makes
+ CONFIG_SHELL unnecessary
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit cf7a7b99794bac936899819b95539be1dbd71708
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Nov 12 12:33:20 2008 -0600
+
+ Use bash for default GNU Make shell application
+
+ Some Make script commands rely on bash-specific features like brace
+ expansion, so default to bash for the SHELL variable with a fallback
+ to the standard sh shell
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 4b530018764934ad5689196e9aa5714a6f4d1a6c
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Nov 12 09:50:45 2008 +0100
+
+ jffs2: rename devices_init () in common/jffs2.c
+
+ rename devices_init () in common/jffs2.c to
+ jffs2_devices_init (), because there is also a
+ devices_init () in common/devices.c.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit af5eb847a10f1037590001355d88bab3fe7be48b
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Mon Nov 10 12:46:20 2008 +0000
+
+ SPARC: Fixed compiler error introduced by commit c160a9544743
+
+ This patch fixes a build error for the SPARC platform. It was
+ introduced by commit c160a9544743e80e8889edb2275538e7764ce334.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 4c60259899aa00f59db0d936b8807f9a26411c0f
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Sun Nov 9 12:50:59 2008 +0100
+
+ mgsuvd add the board-specific part of the HDLC driver
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 534a4359666af48bd69a3743d8a8c2bdb1d3ec70
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Sun Nov 9 12:45:03 2008 +0100
+
+ mgcoge add the board-specific part of the HDLC driver
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 135f5534538bb8ea4f38a7030da12187d22ef7e0
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Sun Nov 9 12:36:15 2008 +0100
+
+ keymile add the common parts of the HDLC driver
+
+ This implements the ICN protocol used across the backplane and is
+ needed by all the keymile boards.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 1cb82a9207a550557399eabc7fe47f21bbd9ddf8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Nov 7 22:46:22 2008 +0100
+
+ drivers/bios_emulator: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bcdf1d2cf6b24fb905fd7da80da4b3c65a7995b5
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Nov 6 14:01:51 2008 -0500
+
+ common/cmd_ide.c: Corrected endian order printing for compact flash serial number.
+
+ Corrected endian order printing for compact flash serial number.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 16a28ef219c27423a1ef502f19070c4d375079b8
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Thu Nov 6 15:04:23 2008 +0100
+
+ IOMUX: Add console multiplexing support.
+
+ Modifications to support console multiplexing. This is controlled using
+ CONFIG_SYS_CONSOLE_MUX in the board configuration file.
+
+ This allows a user to specify multiple console devices in the environment
+ with a command like this: setenv stdin serial,nc. As a result, the user can
+ enter text on both the serial and netconsole interfaces.
+
+ All devices - stdin, stdout and stderr - can be set in this manner.
+
+ 1) common/iomux.c and include/iomux.h contain the environment setting
+ implementation.
+ 2) doc/README.iomux contains a somewhat more detailed description.
+ 3) The implementation in (1) is called from common/cmd_nvedit.c to
+ handle setenv and from common/console.c to handle initialization of
+ input/output devices at boot time.
+ 4) common/console.c also contains the code needed to poll multiple console
+ devices for input and send output to all devices registered for output.
+ 5) include/common.h includes iomux.h and common/Makefile generates iomux.o
+ when CONFIG_SYS_CONSOLE_MUX is set.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 774ce72026f74ac9641bcbbc588b20f2e13f7ab8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Nov 4 16:03:46 2008 -0500
+
+ strings: use puts() rather than printf()
+
+ When running `strings` on really long strings, the stack tends to get
+ smashed due to printf(). Switch to puts() instead since we're only passing
+ the data through.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b03150b52e3c491a86a3cc0945274f0e8f9872e7
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Mon Nov 3 22:16:18 2008 +0100
+
+ Use new CONFIG_SYS_VXWORKS parameters for Netstal boards
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit 29a4c24de99d8cb4ac32991c04cab87ed94ca1f9
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Mon Nov 3 22:15:34 2008 +0100
+
+ cmd_elf.c: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters
+
+ - fix size too small by one in sprintf
+ - changed old (pre 2004) device name ibmEmac to emac
+ - boot device may be overriden in board config
+ - servername may be defined in board config
+ - additional parameters may be defined in board config
+ - fixed some line wrappings
+ - replaced redundant MAX define by max
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit e9084b23d16102f44ace24379a1c0c352497ef80
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Mon Nov 3 22:14:36 2008 +0100
+
+ Add vxworks.h to handle CONFIG_SYS_VXWORKS parameters
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit 0b2f4ecad473d785959c7976f20d2a00bd0ee01f
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Mon Nov 3 22:13:47 2008 +0100
+
+ README: Document CONFIG_SYS parameters for vxworks
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit ace514837cac656e29c37a19569cb8ea83071126
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Oct 31 11:12:38 2008 -0500
+
+ lcd: Let the board code show board-specific info cleanup
+
+ remove unneeded version.h from lcd.c
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 561858ee7d0274c3e89dc98d4d0698cb6fcf6fd9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Nov 3 09:30:59 2008 -0600
+
+ Update U-Boot's build timestamp on every compile
+
+ Use the GNU 'date' command to auto-generate a new U-Boot
+ timestamp on every compile.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 83ad179e2f0f625b88adb8ef5696709e46fb9077
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Thu Dec 4 22:25:57 2008 +0100
+
+ Remove redundant armv4 flag from arm926ejs compile flags
+
+ Currently the arm926ejs tree has the armv4 option set during compilation.
+ This flag does not belong here because a arm926 CPU is always a armv5 CPU.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 89a7a87f084c657f8e32b513a77b50eca07e17ec
+Author: Nicolas Ferre <nicolas.ferre@atmel.com>
+Date: Sat Dec 6 13:11:14 2008 +0100
+
+ at91: Choose environment variables location within make config target
+
+ This patch adds the possiblity to choose the media where the environment will
+ be located. This allow to choose this fundamental configuration without editing
+ config files.
+
+ Documentation file added.
+
+ Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
+ Acked-by: Stelian Pop <stelian@popies.net>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1450c4a6682378567030414a9f1198c39b7730c7
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Mon Nov 3 15:30:34 2008 +0100
+
+ lwmon, tqm8xx: Fix build errors
+
+ Commit 6b59e03e0237a40a2305ea385defdfd92000978b
+ lcd: Let the board code show board-specific info
+
+ introduced some bugs which prevent U-Boot building
+ for lwmon board if CONFIG_LCD_INFO_BELOW_LOGO will
+ be defined in the board configuration.
+
+ Also "LCD enabled" building for TQM823L doesn't work
+ since this commit.
+
+ This patch fixes above-mentioned issues.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit bfa0af6b22ff25b0719a8910f9b6d1f975aa6fb0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Nov 2 01:18:18 2008 -0400
+
+ ignore .gdb_history files
+
+ When using gdb, history files will often get generated. So ignore them.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c8aa7dfc18f7cc90d0aea6c7becbb67dfc5bba4b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 31 12:26:55 2008 +0100
+
+ FPGA: move fpga drivers to drivers/fpga
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6a86bb6c25376f0358478219fa28d7c84dd01ed0
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 16:29:38 2008 -0600
+
+ net: Fix TftpStart() ip:filename bug
+
+ The TftpStart() function modifies the 'BootFile'
+ string when 'BootFile' contains both an IP address
+ and filename (eg 1.2.3.4:/path/file). This causes
+ subsequent calls to TftpStart to incorrectly parse
+ the TFTP filename and server IP address to use.
+ For example:
+
+ => tftp 0x100000 10.52.0.62:/home/ptyser/non_existant
+ Speed: 100, half duplex
+ Using eTSEC1 device
+ TFTP from server 10.52.0.62; our IP address is 10.52.253.79
+ ^^^^^^^^^^ CORRECT
+ Filename '/home/ptyser/non_existant'.
+ ^^^^^^^^^^^^^^^^^^^^^^^^^ CORRECT
+ Load address: 0x100000
+ Loading: *
+ TFTP error: 'File not found' (1)
+ Starting again
+
+ eTSEC2: No link.
+ Speed: 100, half duplex
+ Using eTSEC1 device
+ TFTP from server 10.52.0.33; our IP address is 10.52.253.79
+ ^^^^^^^^^^ WRONG
+ Filename '10.52.0.62'.
+ ^^^^^^^^^^ WRONG
+ Load address: 0x100000
+ Loading: *
+ TFTP error: 'File not found' (1)
+ Starting again
+
+ TftpStart() was modified to not modify the 'BootFile' string.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d32c5be50bf0600bfdc54223ef341ee9c63db445
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 16:26:21 2008 -0600
+
+ net: Add additional IP fragmentation check
+
+ Ignore IP packets which have the "more fragments" flag bit
+ set. This flag indicates the IP packet is fragmented and
+ must be ignored by U-Boot.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e0c07b868cab405ab4b5335a0247899bfc5ea0b6
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 16:26:20 2008 -0600
+
+ net: Define IP flag field values
+
+ These defines were pulled from the "Add simple
+ IP/UDP fragmentation support" patch from Frank
+ Haverkamp <haver@vnet.ibm.com>.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 23afaba65ec5206757e589ef334a8b38168c045f
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Tue Dec 2 10:31:04 2008 +0100
+
+ net: tsec: Fix Marvell 88E1121R phy init
+
+ This patch tries to ensure that phy interrupt pin
+ won't be asserted after booting. We experienced
+ following issues with current 88E1121R phy init:
+
+ Marvell 88E1121R phy can be hardware-configured
+ to share MDC/MDIO and interrupt pins for both ports
+ P0 and P1 (e.g. as configured on socrates board).
+ Port 0 interrupt pin will be shared by both ports
+ in such configuration. After booting Linux and
+ configuring eth0 interface, port 0 phy interrupts
+ are enabled. After rebooting without proper eth0
+ interface shutdown port 0 phy interrupts remain
+ enabled so any change on port 0 (link status, etc.)
+ cause assertion of the interrupt. Now booting Linux
+ and configuring eth1 interface will cause permanent
+ phy interrupt storm as the registered phy 1 interrupt
+ handler doesn't acknowledge phy 0 interrupts. This
+ of course should be fixed in Linux driver too.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2e4970d8109d690adcf615d9e3cac7b5b2e8eaed
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Dec 2 12:59:51 2008 -0600
+
+ net: Fix download command parsing
+
+ When CONFIG_SYS_HUSH_PARSER is defined network download
+ commands with 1 argument in the format 'tftp "/path/file"'
+ do not work as expected. The hush command parser strips
+ the quotes from "/path/file" which causes the network
+ commands to interpret "/path/file" as an address
+ instead of the intended filename.
+
+ The previous check for a leading quote in netboot_common()
+ was replaced with a check which ensures only valid
+ numbers are treated as addresses.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3c2c2f427905040c1513d0c51d637689cba48346
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Thu Nov 27 22:30:27 2008 +0100
+
+ Remove non-ascii characters from fat code
+
+ This code contains some non-ascii characters in comment lines and code.
+ Most editors do not display those characters properly and editing those
+ files results always in diffs at these places which are usually not required
+ to be changed at all. This is error prone.
+
+ So, remove those weird characters and replace them by normal C-style
+ equivalents for which the proper defines were already in the header.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit dc889e865356497d3e495570118c2245ebce2631
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 28 20:16:58 2008 +0800
+
+ 85xx: fix the wrong DDR settings for MPC8572DS
+
+ The default DDR freq is 400MHz or 800M data rate,
+ the old settings is pure wrong for the default case.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9df59533f77de2829b4b66e5b7620e04edaa391c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 24 10:29:26 2008 -0600
+
+ 85xx: init gd as early as possible
+
+ Moved up the initialization of GD so C code like set_tlb() can use
+ gd->flags to determine if we've relocated or not in the future.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit aed461af81012a398a205e9be67ab37667491838
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 24 10:29:25 2008 -0600
+
+ 85xx: Fix relocation of CCSRBAR
+
+ If the virtual address for CCSRBAR is the same after relocation but
+ the physical address is changing we'd end up having two TLB entries with
+ the same VA. Instead we new us the new CCSRBAR virt address + 4k as a
+ temp virt address to access the old CCSRBAR to relocate it.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit ea154a1781135d822eedee7567cc156089eae93c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 24 10:25:14 2008 -0600
+
+ FSL: Moved BR_PHYS_ADDR for localbus to common header
+
+ The BR_PHYS_ADDR macro is useful on all machines that have local bus
+ which is pretty much all 83xx/85xx/86xx chips.
+
+ Additionally most 85xx & 86xx will need it if they want to support
+ 36-bit physical addresses.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9427ccde0355a2ebf47454e8e1be59f5b9864e08
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 13:47:12 2008 -0600
+
+ 85xx: Add PORDEVSR_PCI1 define
+
+ Add define used to determine if PCI1 interface is in PCI or PCIX mode.
+
+ Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 35db1c6d34b57ae15e99cf03c8e8f8a6148d74f3
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Nov 21 19:24:22 2008 -0600
+
+ drivers/fsl_pci_init: Fix inbound window mapping bug
+
+ The current code will cause the creation of a 4GB window
+ starting at 0 if we have more than 4GB of RAM installed,
+ which overlaps with PCI_MEM space and causes pci_bus_to_phys()
+ to return erroneous information. Limit the size to 4GB - 1;
+ which causes the code to create one 2GB and one 1GB window
+ instead.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 5a105a333dab6a23e92d763ce76d6f31d57f45df
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Nov 20 15:36:48 2008 -0600
+
+ Removed unused CONFIG_L1_INIT_RAM symbol.
+
+ Prevent further viral propogation of the unused
+ symbol CONFIG_L1_INIT_RAM by just removing it.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 7008d26a40a76f90cae5824c812cfed449fb97b8
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Oct 29 09:21:44 2008 -0500
+
+ fsl ddr skip interleaving if not supported.
+
+ Removed while(1) hang if memctl_intlv_ctl is set wrong.
+ Remove embedded tabs from strings.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit dd332e18d082de75eca3fc2c7c778f5d4571a096
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Nov 13 18:08:57 2008 +0100
+
+ 85xx: socrates: fix DDR SDRAM tlb entry configuration
+
+ since commit be0bd8234b9777ecd63c4c686f72af070d886517
+ tlb entry for socrates DDR SDRAM will be reconfigured
+ by setup_ddr_tlbs() from initdram() causing an
+ inconsistency with previously configured DDR SDRAM tlb
+ entry from tlb_table:
+
+ socrates>l2cam 7 9
+ IDX PID EPN SIZE V TS RPN U0-U3 WIMGE UUUSSS
+ 7 : 00 00000000 256MB V 0 -> 0_00000000 0000 -I-G- ---RWX
+ 8 : 00 00000000 256MB V 0 -> 0_00000000 0000 ----- ---RWX
+ 9 : 00 10000000 256MB V 0 -> 0_10000000 0000 ----- ---RWX
+
+ This patch makes the presence of the DDR SDRAM tlb entry in
+ the tlb_table dependent on CONFIG_SPD_EEPROM to avoid this
+ inconsistency.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit a2cd50ed6ef0ac6b127b3d6db756979a8336718d
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Nov 11 10:17:10 2008 -0600
+
+ 85xx: Add CPU 2 errata workaround to all 8548 boards
+
+ All mpc8548-based boards should implement the suggested workaround
+ to CPU 2 errata. Without the workaround, its possible for the
+ 8548's core to hang while executing a msync or mbar 0 instruction
+ and a snoopable transaction from an I/O master tagged to make
+ quick forward progress is present.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit e57f0fa1333cdf3ca36110aac2900712a5f82976
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:53:45 2008 +0800
+
+ 85xx: the DDR tlb is missed for the !CONFIG_SPD_EEPROM case
+
+ we need TLB entry for DDR at !SPD case.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9b0ad1b1c7a15ff674978705c7c52264978dc5d8
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:53:38 2008 +0800
+
+ 85xx: remove the unused ddr_enable_ecc in the board file
+
+ The DDR controller of 8548/8544/8568/8572/8536 processors
+ have the ECC data init feature, and the new DDR code is
+ using the feature, and we don't need the way with DMA to
+ init memory any more.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 4a129a57d923f7c15aa1f567028a80a32d66a100
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 30 19:36:53 2008 +0100
+
+ at91rm9200dk: Fix typo
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ed3b18e05c9a8ffa5fb643da9bcec7452e5d5e01
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 30 19:36:50 2008 +0100
+
+ AT91: remove non supported board AT91RM9200DF macro
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bd876772ee04095e5dd943d97515a1f14bad4b1c
+Author: Ilko Iliev <iliev@ronetix.at>
+Date: Tue Dec 2 17:27:54 2008 +0100
+
+ mtd/dataflash.c: fix a problem with the last partition
+
+ This patch fix the problem that only the [NB_DATAFLASH_AREA - 1] dataflash
+ partition can be defined to use the area to the end of dataflash size.
+ Now it is possible to have only one dataflash partition from 0 to the end
+ of of dataflash size.
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit 03f797793b124dccaae145b977d15d6cb9e74504
+Author: Ilko Iliev <iliev@ronetix.at>
+Date: Tue Dec 2 17:20:17 2008 +0100
+
+ fix some coding style violations.
+
+ This patch fix some coding style violations.
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit 5e46b1e54112f4b7fd5185665e571510132c12a7
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 27 14:11:37 2008 +0100
+
+ OneNAND: Add missing mtd info struct before calling onenand_erase()
+
+ Without this patch "saveenv" crashes when MTD partitions are enabled (e.g.
+ for use in UBI) via CONFIG_MTD_PARTITIONS.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 29382d4064fbaff5daacff4c3209370fa5713966
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Thu Nov 20 16:43:52 2008 -0600
+
+ mpc8641: Fix error in README
+
+ I made some updates to the code that didn't make it into the
+ README - fix this
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 801a194616d95e6fc426a176d9615ccbf9876c7f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Nov 20 12:01:02 2008 -0600
+
+ Removed unused CONFIG_L1_INIT_RAM symbol.
+
+ Prevent further viral propogation of the unused
+ symbol CONFIG_L1_INIT_RAM by just removing it.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f698738e46cb461e28c2d58228bb34a2fcf5a475
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Nov 20 14:02:56 2008 -0600
+
+ 86xx: Fix non-64-bit compilation problems.
+
+ Introducing 64-bit (36-bit) support for the MPC8641HPCN
+ failed to accomodate the other two 86xx boards.
+ Introduce definitions for CONFIG_SYS_CCSRBAR_PHYS_{LOW,HIGH}
+ CONFIG_SYS_CCSR_DEFAULT_DBAT{U,L} and CONFIG_SYS_CCSR_DEFAULT_IBAT{U,L}
+ with nominal 32-bit values.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Acked-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit bebfc6ef3ec994c8e18783269b1d8d41f8e38afd
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Nov 26 17:40:37 2008 +0100
+
+ Remove obsolete command (apply afte USB style patch, 80 chars strict)
+
+ Remove USB obsolete commmand
+
+ Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit de39f8c19d7c12017248c49d432dcb81db68f724
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Nov 26 17:41:34 2008 +0100
+
+ USB style patch, 80 chars strict
+
+ USB Code style patch
+
+ Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit d10c5a87cb8affbb4d35a311370316d4383d598e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Nov 7 22:46:21 2008 +0100
+
+ drivers/usb: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 2077e348c2a84901022ad95311b47b70361e6daa
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Nov 25 10:47:02 2008 -0600
+
+ NAND: Fix misplaced return statement in nand_{read,write}_skip_bad().
+
+ This caused the operation to be needlessly repeated if there were
+ no bad blocks and no errors.
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 89295028e7d8f7a524f485328279d72fdb102385
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Nov 24 12:09:50 2008 +0100
+
+ ppc4xx: ml300 remove Xilinx BSP from ml300 folder
+
+ This BSP should be outside u-boot source tree.
+ The second reason is that xilinx ppc405 was moved to generic platform.
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 24eea623d4974a169026a975ba12fb23d48154b1
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Nov 24 15:11:10 2008 +0100
+
+ ppc4xx: Remove unused features
+
+ This patch disables some unused features from the PCI405 configuration
+ to keep U-Boot image size below 192k.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0c2385c3bb51f5d3911fce1ec4720db86b534c2b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Nov 24 15:11:09 2008 +0100
+
+ ppc4xx: Use correct io accessors for PCI405
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 348c849d86a6f0785752b9bc497a34658713d1d1
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Nov 24 15:11:08 2008 +0100
+
+ ppc4xx: Remove unused code from PCI405 code
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 633639587e3596f0dbf5e6247dd3faf80b1d9063
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Nov 20 09:59:09 2008 +0100
+
+ powerpc, keymile boards: extract identical config options
+
+ This patch extracts the identical config options for the
+ keymile boards mgcoge, mgsuvd and kmeter1 in a new
+ common config file keymile-common.h.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9482a8e3d6ac766d90e5059dce777b1e4c868a30
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Nov 21 08:29:40 2008 +0100
+
+ powerpc: keymile: Add a check for the PIGGY debug board
+
+ Check the presence of the PIGGY on the keymile boards mgcoge,
+ mgsuvd and kmeter1. If the PIGGY is not present, dont register
+ this Ethernet device.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 58c696eed839af894e0265064669c402dc28b371
+Author: Wolfgang Denk <wd@xpert.denx.de>
+Date: Mon Nov 24 21:50:59 2008 +0100
+
+ AT91RM9200DK: fix broken boot from NOR flash
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8052352f20b33bef8f9872fc983eac73d4693c38
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Tue Nov 18 10:48:46 2008 +0100
+
+ at91rm9200: fix broken boot from nor flash
+
+ This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if
+ CONFIG_AT91RM9200 is defined and nor preloader is used.
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+
+commit 25ea652e907516a283b38237e83712a918f125d7
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Mon Nov 17 15:58:00 2008 +0100
+
+ UBI: Add proof-of-concept CFI flash support
+
+ With this patch UBI can be used on CFI flash chips.
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e6a7edbc1778d27431ac663b40a71dafa5d20578
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Mon Nov 17 15:57:59 2008 +0100
+
+ mtd: Remove a printf() from add_mtd_device().
+
+ Remove a printf() from add_mtd_device(), which produces spurious output.
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 91809ed51d8327a8dbbf29aa98a091154c282171
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Mon Nov 17 15:57:58 2008 +0100
+
+ cfi-mtd: Add cfi-mtd driver.
+
+ Add cfi-mtd driver, which exports CFI flash to MTD layer.
+ This allows CFI flash devices to be used from MTD layer.
+
+ Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD
+ option. Initialization is done by calling cfi_mtd_init() from
+ flash_init().
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6ea808efdf9aa5d9067fbfac32acde8539129ed2
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Mon Nov 17 15:49:32 2008 +0100
+
+ cfi_flash: Add interface for flash verbosity control
+
+ Add interface for flash verbosity control. It allows
+ to disable output from low-level flash API. It is useful
+ when calling these low-level functions from context other
+ than flash commands (for example the MTD/CFI interface
+ implmentation).
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ebc9784ce6528385bb8d2558e783622d4bbf20f8
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Thu Nov 20 15:17:38 2008 +0100
+
+ cfi_flash: Export flash_sector_size() function.
+
+ Export flash_sector_size() function from drivers/mtd/cfi_flash.c,
+ so that it can be used in the upcoming cfi-mtd driver.
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 45aa5a7f4d5bcb79927ddfc896c1d7c4326e235d
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 17 14:45:22 2008 +0100
+
+ cfi_flash: Make all flash access functions weak
+
+ This patch defines all flash access functions as weak so that
+ they can be overridden by board specific versions.
+
+ This will be used by the upcoming VCTH board support where the NOR
+ FLASH unfortunately can't be accessed memory-mapped. Special
+ accessor functions are needed here.
+
+ To enable this weak functions you need to define
+ CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header.
+ Otherwise the "old" default functions will be used resulting
+ in smaller code.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a5c4067017631d903e1afa6ad615f0ce19fea517
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 24 08:31:16 2008 +0100
+
+ UBI: Change parsing of size in commands to default to hex
+
+ Currently the size parameters of the UBI commands (e.g. "ubi write") are
+ decoded as decimal instead of hex as default. This patch now interprets
+ all these values consistantly as hex, as all other standard U-Boot commands
+ do.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit de01c76c3ccc4e6c5989228eed58e955a3a1a968
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Nov 21 13:06:06 2008 +0100
+
+ ppc4xx: ML2 shouldn't include the 4xx EMAC driver
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1a6a00dcc5bdfc6e9b4b00f39c1f583a7f96fc7f
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Nov 14 16:19:19 2008 +0300
+
+ ppc4xx: katmai: Change default config
+
+ This patch enables support for EXT2, and increases the
+ CONFIG_SYS_BOOTMAPSZ size for the default configuration
+ of the katmai boards to use them as the RAID-reference
+ AMCC setups.
+
+ EXT2 enabling allows one to boot kernels from the EXT2
+ formatted Compact Flash cards.
+
+ CONFIG_SYS_BOOTMAPSZ increasing allows one to boot the
+ Linux kernels, which use PAGE_SIZE of 256KB. Otherwise,
+ the memory area with DTB file (which is placed at the
+ end of the bootmap area) will turn out to be overlapped
+ with the BSS segment of the 256KB kernel, and zeroed
+ in early_init() of Linux.
+
+ Actually, increasing of the bootmap size could be done
+ via setting of the bootm_size U-Boot variable, but it looks
+ like the current U-Boot implementation have some bootm_size-
+ related functionality lost. In many places through the U-Boot
+ code the CONFIG_SYS_BOOTMAPSZ definition is used directly
+ (instead of trying to read the corresponding value from the
+ environment). The same is truth for the boot_jump_linux()
+ function in lib_ppc/bootm.c, where U-Boot transfers control
+ to Linux passing the CONFIG_SYS_BOOTMAPSZ (not bootm_size)
+ value to the booting kernel.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ddf45cc758d394591fb9bcdcbe96530f733f2bce
+Author: Dave Mitchell <dmitch71@gmail.com>
+Date: Thu Nov 20 14:09:50 2008 -0600
+
+ ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization
+
+ Expanded OCM TLB to allow access to 64K OCM as well as 256K of
+ internal SRAM.
+
+ Adjusted internal SRAM initialization to match updated user
+ manual recommendation.
+
+ OCM & ISRAM are now mapped as follows:
+ physical virtual size
+ ISRAM 0x4_0000_0000 0xE300_0000 256k
+ OCM 0x4_0004_0000 0xE304_0000 64k
+
+ A single TLB was used for this mapping.
+
+ Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b14ca4b61a681f75f3125676e09d7ce6af66e927
+Author: Dave Mitchell <dmitch71@gmail.com>
+Date: Thu Nov 20 14:00:49 2008 -0600
+
+ ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs
+
+ Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and
+ L2 cache DCRs from ppc440.h to this new header.
+
+ Also converted these DCR defines from lowercase to uppercase and
+ modified referencing modules to use them.
+
+ Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 711e2b2af820d21d9931d4cf8057d3894600fd54
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Thu Nov 20 14:37:57 2008 -0500
+
+ ppc4xx: Delete unused definitions for SDR0_DDRCFG from ppc4xx.h
+
+ The definitions of bits in SDR_CFG are incorrect, and not used within
+ U-Boot. Therefore, they can be removed.
+
+ The naming of the sdr_ddrdl/sdr_cfg registers do not follow conventions,
+ and are unused, so they can be removed too.
+
+ A definition for SDR0_DDRCFG is added.
+
+ Signed-off-by: Steven A. Falco <sfalco@harris.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e23c7c95a96eb0f068efe5c532215a10a1512a95
+Author: Dirk Behme <dirk.behme@gmail.com>
+Date: Mon Nov 10 20:15:25 2008 +0100
+
+ ARM: OMAP: Convert IO macros
+
+ Convert IO macros to readx/writex.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit 263b749e2e25473a48776d317bd2a7e2ddcdd212
+Author: Ilko Iliev <iliev@ronetix.at>
+Date: Sun Nov 9 15:53:14 2008 +0100
+
+ lib_arm: do_bootm_linux() - correct a small mistake
+
+ This patch corrects a small bug in the "if" condition:
+ the parameter "flag" is 0 and the "if" condition is always true.
+ The result is - the boom command doesn't start the kernel.
+ Affected targets: all arm based.
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit 3e0cda071a67cb5709e3fa4faf6b31a731859acc
+Author: Stelian Pop <stelian@popies.net>
+Date: Sun Nov 9 00:14:46 2008 +0100
+
+ AT91: Enable PLLB for USB
+
+ At least some (old ?) versions of the AT91Bootstrap do not set up the
+ PLLB correctly to 48 MHz in order to make USB host function correctly.
+
+ This patch sets up the PLLB to the same values Linux uses, and makes USB
+ work ok on the following CPUs:
+ - AT91CAP9
+ - AT91SAM9260
+ - AT91SAM9263
+
+ This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all
+ the relevant AT91CAP9/AT91SAM9 atmel boards.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ad229a44e162af0f65e57e4e3dc133d5f0364ecb
+Author: Stelian Pop <stelian@popies.net>
+Date: Fri Nov 7 13:55:14 2008 +0100
+
+ AT91: Use AT91_CPU_CLOCK in displays
+
+ Introduce AT91_CPU_CLOCK and use it for displaying the CPU
+ speed in the LCD driver.
+
+ Also make AT91_MAIN_CLOCK and AT91_MASTER_CLOCK reflect the
+ corresponding board clocks.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit fed36ac5ae613773b6cd90e61e292c45440e10c8
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Nov 20 09:57:47 2008 +0100
+
+ powerpc: 83xx: add support for the kmeter1 board
+
+ This patch adds support for the kmeter1 board from Keymile,
+ based on a Freescale MPC8360 CPU.
+
+ - serial console on UART 1
+ - 256 MB DDR2 RAM
+ - 64 MB NOR Flash
+ - Ethernet RMII Mode over UCC4
+ - PHY SMSC LAN8700
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 25fb4eaaeab3f8866020818f4729d990dcc91cf0
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 20 11:46:20 2008 +0100
+
+ ppc4xx: Clear all potentially pending exceptions in MCSR
+
+ This is needed on Canyonlands which still has an exception pending
+ while running relocate_code(). This leads to a failure after trap_init()
+ is moved to the top of board_init_r().
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit facdad5f2602e899a01746916beddbf9e856b5ee
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Nov 19 10:10:30 2008 +0100
+
+ powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2f2a5c3714d17f4ead18b713128b7226e0e822f4
+Author: Howard Gregory <Greg.Howard@freescale.com>
+Date: Tue Nov 4 14:55:33 2008 +0800
+
+ mpc83xx: Improve the performance of DDR memory
+
+ modify the CAS timings. my understanding is that these
+ settings decrease various wait times in the DDR interface.
+ Because these wait times are in clock cycles, and the DDR
+ clock on the 8315 RDB runs slower than on some other 83xx
+ platforms, we can dial down these values without a problem,
+ thereby decreasing the latency of memory a little.
+
+ Signed-off-by: Howard Gregory <Greg.Howard@freescale.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8000b086b33a5a81f3f390f37e178db7956dc08b
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Fri Oct 24 14:55:33 2008 +0200
+
+ ARM: Add Apollon UBI support
+
+ To enable UBI on Apollon you need to uncomment the CONFIG_SYS_USE_UBI
+ macro.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 694a0b3f1c0accd0de94b89555155d69f8022824
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 11:47:05 2008 +0100
+
+ UBI: Add UBI command support
+
+ This patch adds these UBI commands:
+
+ ubi part [nand|onenand] [part] - Show or set current partition
+ ubi info [l[ayout]] -Display volume and UBI layout information
+ ubi create[vol] volume [size] [type] - Create volume name with size
+ ubi write[vol] address volume size - Write volume from address with size
+ ubi read[vol] address volume [size] - Read volume to address with size
+ ubi remove[vol] volume - Remove volume
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 58be3a1056d88c6d05f3e914389282807e69923a
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:38:24 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 8/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 47ae6693f54f80455ae32c2e0d995e0e4bdc15b9
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:36:36 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 7/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7e6ee7ad27de5216db1baef76f38c3429c8f4a2a
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:32:36 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 6/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c91a719daa331b5856109313371e4ece5ec06d96
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:28:06 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 5/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f412fefa079c6aa9a9763f6869bf787ea6bf6e1b
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:27:23 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 4/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2d262c4853cb5b6ddce1a28a9641f2de3688d7ea
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:26:54 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 3/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 961df83361aff9a14f226214224eb8a06e05ba24
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:25:44 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 2/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f399d4a281713d5ef2d764f05d545fe61e3bd569
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:23:06 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 1/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e29c22f5abe6e0f4baa6251efed6074cdfc3db79
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:20:36 2008 +0100
+
+ MTD: Add MTD paritioning infrastructure
+
+ This MTD part infrastructure will be used by the upcoming
+ UBI support.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9b827cf1720acda2473afa516956eab6f7cca9a1
+Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+Date: Thu Oct 16 22:54:03 2008 +0530
+
+ Align end of bss by 4 bytes
+
+ Most of the bss initialization loop increments 4 bytes
+ at a time. And the loop end is checked for an 'equal'
+ condition. Make the bss end address aligned by 4, so
+ that the loop will end as expected.
+
+ Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3f510db522d160179dff3ddcce9b18f6241c2c24
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Nov 10 19:45:35 2008 -0600
+
+ mpc8641: fix address-cells default in old .dts detection
+
+ address-cells defaults to 2, not 1; so in the unlikely
+ event that it isn't specified, this patch is required
+ for correct operation.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit d025aa4b20a0618a2bada0132a9a0a4afb717f1a
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Oct 31 17:14:39 2008 -0500
+
+ lib_ppc: Move trap_init to occur earlier
+
+ Doing trap_init immediately once we're running from RAM
+ means we're no longer dependent on the physical location of
+ the flash on non-BookE platforms. Before trap_init, those
+ platforms switch to real mode and go to 0xfff00100 on exception.
+ After the switch, they go to 0x00000100 This makes it easier to
+ move the flash location.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit d52082b12c6e545705a19433a2f4142526536189
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Nov 7 13:46:19 2008 -0600
+
+ mpc8641: Try to detect old .dts files
+
+ Since we've changed the memory map of the board, be nice and
+ add some checking to try to catch out-of-date .dts files. We do
+ this by checking the CCSRBAR location in the .dts and comparing
+ it to the CCSRBAR location in u-boot. If they don't match, a
+ warning msg is printed. This isn't foolproof, but it's simple and
+ will catch most of the cases where an out-of-date .dts is present,
+ including all of the cases where a new u-boot is used with an old
+ standard MPC8641 .dts file as supplied with Linux.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 8db0400a27839f91c047dcb83f4a0f09e054a180
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Thu Nov 6 13:04:09 2008 -0600
+
+ toplevel Makefile: Add MPC8641HPCN_36BIT target
+
+ This will enable CONFIG_PHYS_36BIT for MPC8641HPCN.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 3111d32c494e8251b90917447796a7206b757e1e
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Thu Nov 6 17:37:35 2008 -0600
+
+ mpc8641: Support 36-bit physical addressing
+
+ This patch creates a memory map with all the devices
+ in 36-bit physical space, in addition to the 32-bit map.
+ The CCSR relocation is moved (again, sorry) to
+ allow for the physical address to be 36 bits - this
+ requires translation to be enabled. With 36-bit physical
+ addressing enabled, we are no longer running with VA=PA
+ translations. This means we have to distinguish between
+ the two in the config file. The existing region name is
+ used to indicate the virtual address, and a _PHYS variety
+ is created to represent the physical address.
+
+ Large physical addressing is not enabled by default.
+ Set CONFIG_PHYS_64BIT in the config file to turn this on.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit c759a01a0022de9378a3a761f49786f87684c916
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Thu Nov 6 17:36:04 2008 -0600
+
+ mpc8641: Change 32-bit memory map
+
+ The memory map on the 8641hpcn is modified to look more like
+ the 85xx boards; this is a step towards a more standardized
+ layout going forward. As part of this change, we now relocate
+ the flash.
+
+ The regions for some of the mappings were far larger than they
+ needed to be. I have reduced the mappings to match the
+ actual sizes supported by the hardware.
+
+ In addition I have removed the comments at the head
+ of the BAT blocks in the config file, rather than updating
+ them. These get horribly out of date, and it's a simple
+ matter to look at the defines to see what they are set to
+ since everything is right here in the same file.
+
+ Documentation has been changed to reflect the new map, as this
+ change is user visible, and affects the OS which runs post-uboot.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit bf9a8c34309ed9276258295db9e9212aabb2531a
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:35 2008 -0600
+
+ mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY
+
+ We define CONFIG_MONITOR_BASE_EARLY to define the initial location
+ of the bootpage in flash. Use this to create an early mapping
+ definition for the FLASH, and change the early_bats code to use this.
+
+ This change facilitates the relocation of the flash since the early
+ mappings are no longer tied to the final location of the flash.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit c1e1cf69547b138173f87a7f81c42a5d8dbfde3d
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:34 2008 -0600
+
+ mpc86xx: Use SRR0/1/rfi to enable address translation, not blr
+
+ Using a mtmsr/blr means that you have to be executing at the
+ same virtual address once you enable translation. This is
+ unnecessarily restrictive, and is not really how this is
+ usually done. Change it to use the more common mtspr SRR0/SRR1
+ and rfi method.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 6bf98b1362f0cb237620355ed3e6762fff82388d
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:33 2008 -0600
+
+ mpc8641: make DIAG_ADDR == FLASH_BASE
+
+ Currently, that's what it is, but it's hardcoded.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 170deacb1ddc39164bdb68f3963e0c0456a5369b
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:32 2008 -0600
+
+ mpc8641: Drop imaginary second flash bank, map 8MB
+
+ There's a lot of setup and foo for the second flash
+ bank. The problem is, this board doesn't actually have one.
+ Clean this up. Also, the flash is 8M in size. Get rid
+ of the confusing aliased overmapping, and just map 8M.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 0f2d66027bfc60dc7eea2f096af8891988c5abe4
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:31 2008 -0600
+
+ mpc8641: only define CONFIG_ENV_SIZE once
+
+ It's currently defined twice inside in an if/else block, but
+ both halves set the same value. Move the define outside
+ the if.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 24bfb48c35fed6ad1f047e3e4a27df302482cd93
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:30 2008 -0600
+
+ mpc86xx: Move setup_bats into cpu_init_f
+
+ In order to later allow for a physical relocation of the
+ flash, setup_bats, which sets up the final BAT mapping
+ for the board, needs to happen *after* init_laws().
+ Otherwise, there will be no window programmed for the flash
+ at the new physical location at the point when we change
+ the mmu translation.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 05df3e5a638be8c5b0899eae1766bbe8e4b92c17
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:29 2008 -0600
+
+ mpc8641: Remove extra "0" from BR2 define
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit edf3fe7d39a1ee07353128af5221422ce9ccfad6
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Oct 23 09:08:18 2008 -0400
+
+ drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver.
+
+ Copied over the fixed PHY driver as used in pp4xx/4xx_enet.c.
+ This adds support for PHY-less MAC connections to the UEC.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 54bdcc9fb6670afde9c26dcf364f582879bf21d6
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 23 16:27:24 2008 +0000
+
+ ColdFire: Add mii driver in drivers/net
+
+ All CF platforms' mii.c are consolidated into one
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 25a859066b3af1070eb69f12022113c0a91bd813
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Oct 27 23:53:17 2008 -0700
+
+ Moved initialization of PPC4xx EMAC to cpu_eth_init()
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 4d03a4e20e58552cb96d61a0e8b56cdb6cc60126
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Nov 9 21:29:23 2008 -0800
+
+ Moved PPC4xx EMAC driver to drivers/net
+
+ Also changed path in all linker scripts that reference this driver
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 96e21f86e8266ed40759e5495ee461265d7f6d28
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Oct 27 23:50:15 2008 -0700
+
+ Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
+
+ All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 9eb79bd8856bcab896ed5e1f1bca159807a124dd
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Oct 23 22:02:49 2008 -0700
+
+ Moved initialization of MPC8XX SCC to cpu_eth_init()
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a9bec96d6359ac9f90a852962bf3040cad9e0256
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Oct 22 23:47:51 2008 -0700
+
+ Moved initialization of MPC8220 FEC to cpu_eth_init()
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0e8454e990385a58f708c2fc26d31ac041c7a6c5
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Oct 22 23:32:48 2008 -0700
+
+ Moved initialization of QE Ethernet controller to cpu_eth_init()
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3456a148276d5494b53ee40242efb6462d163504
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Oct 22 23:20:29 2008 -0700
+
+ Moved initialization of FCC Ethernet controller to cpu_eth_init
+
+ Affected boards:
+ Several MPC8xx boards
+ Several MPC8260/MPC8272 boards
+ Several MPC85xx boards
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 62e15b497f5c6334c059512678c8db7940ae4c61
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Oct 30 22:15:35 2008 -0700
+
+ Fix typo in cpu/mpc85xx/cpu.c
+
+ CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 5dfb3ee3f54e2382a08d72906f0e79ecf944f6e3
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sun Oct 19 12:08:50 2008 +0900
+
+ net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init
+
+ This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init
+ as a part of ongoing eth_initialize cleanup work. The function ret value
+ is also fixed as it should be negative on fail.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit cc94074ecac1885d18ddb683eb934b3c0268aa5b
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Fri Sep 5 01:55:22 2008 -0400
+
+ Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init()
+
+ Also, removed the driver initialization from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f2a7806fc23e82d30c8548911369e0c530607354
+Author: Clive Stubbings <uboot@xentech.co.uk>
+Date: Mon Oct 27 15:05:00 2008 +0000
+
+ xilinx_emaclite buffer overrun
+
+ Patch to fix buffer allocation size and alignment. Buffer needs to be u32 aligned and
+ PKTSIZE_ALIGN bytes long.
+
+ Acked-by: Michal Simek <monstr@monstr.eu>
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0115b1953718a2969f6469d3d5da51ba11e12d42
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date: Fri Sep 26 08:59:12 2008 -0400
+
+ NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg.
+
+ The current uec_miiphy_read and uec_miiphy_write hardcode access devlist[0]
+ This patch makes these function use the devname argument that is passed in to
+ allow access to the phy registers of other devices in devlist[].
+
+ Signed-of-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 44dcb7332033db8de2810f2fffcae3084f15c8d4
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date: Mon Oct 6 15:31:43 2008 -0400
+
+ Adds two more ethernet interface to 83xx
+
+ Fixed compiler warning "declared but unused" eth5_uec_info and eth6_uec_info.
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d8003fa03733901b73d6c4667b4d80fc8eb1ddd3
+Author: Stelian Pop <stelian@popies.net>
+Date: Fri Nov 7 13:54:31 2008 +0100
+
+ AT91: Replace AT91_BASE_EMAC by the board specific values.
+
+ AT91_BASE_EMAC is never used outside the board specific files,
+ so replace its usage by the board specific AT91xxx_BASE_EMAC.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c91e17affa175ce06afa89b04752301eb4a61666
+Author: Stelian Pop <stelian@popies.net>
+Date: Fri Nov 7 12:09:21 2008 +0100
+
+ AT91: Replace (undefined) AT91_ID_US* by the board specific values.
+
+ AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined.
+ Since they are never used outside the board specific files, they can
+ be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 /
+ AT91xxx_ID_US2.
+
+ Bug spotted by Jesus Alvarez <jalvarez@micromint.com>.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 28962f5a2de81bc0eed1c0b08c6bfaa1cc134ea2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 1 10:47:59 2008 +0100
+
+ Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1079432e04ccf71aa3684181186182cd63512f19
+Author: Sergey Lapin <slapin@ossfans.org>
+Date: Fri Oct 31 12:28:43 2008 +0100
+
+ Custom AFEB9260 board support
+
+ This patch provides support for AFEB9260 board, a product of
+ OpenSource hardware and software. Some commertial projects
+ are made with this design. A board is basically AT91SAM9260-EK
+ with some modifications and different peripherals and different
+ parts used. Main purpose of this project is to gain experience in
+ hardware design.
+ More info: http://groups.google.com/group/arm9fpga-evolution-board
+ (In Russian only, sorry).
+ Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
+
+ Signed-off-by: Sergey Lapin <slapin@ossfans.org>
+
+commit 26eecd24f97130e56e9c2c2af0e714e05bce6e00
+Author: Tomohiro Masubuchi <tomohiro_masubuchiattripeaks.co.jp>
+Date: Tue Oct 21 13:17:16 2008 +0900
+
+ Change to use "do_div" macro
+
+ Signed-off-by: Tomohiro Masubuchi <tomohiro_masubuchi@tripeaks.co.jp>
+
+commit e352495318d8056a00faa21b633b3e4374bfbf52
+Author: Roman Mashak <romez777@gmail.com>
+Date: Wed Oct 22 16:00:26 2008 -0400
+
+ ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory
+
+ OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory.
+ It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap
+
+ Signed-off-by: Roman Mashak <romez777@gmail.com>
+
+commit 248b2c367210c06dbd5fbdecf27e97fbe9d05fdb
+Author: Roman Mashak <romez777@gmail.com>
+Date: Tue Oct 21 03:01:41 2008 -0700
+
+ ARM/Versatile port: Removed unused functions
+
+ Removal of never used functions.
+
+ Signed-off-by: Roman Mashak <romez777@gmail.com>
+
+commit 1266df887781c779deaf6d05eea2ef90a470cb34
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Nov 3 15:44:01 2008 -0600
+
+ powerpc: change 86xx SMP boot method
+
+ We put the bootpg for the secondary cpus into memory and use
+ BPTR to get to it. This is a step towards converting to the
+ ePAPR boot methodology. Also, the code is written to
+ deal properly with more than 4GB of RAM.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit b5431560682d8f318fbc49db87cfe13ab41d2ee4
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Oct 31 17:13:49 2008 -0500
+
+ 8641HPCN: Config file cleanup
+
+ There are several items in the config file that were hardcoded
+ but that should really be based on other config options, since
+ the regions are contiguous and depend on being so. This cleans
+ that up a bit. Also, add BR_PHYS_ADDR() macro to convert
+ addresses into the proper format for BR registers.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 4c77de3f144ca088c3867bd6240718c10f5a9d69
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Oct 31 17:13:32 2008 -0500
+
+ 86xx: Make dram_size a phys_size_t
+
+ It's currently a long and should be phys_size_t.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 104992fc541302a6bac74448e01e7fdad20abca0
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Sun Nov 2 18:19:32 2008 -0600
+
+ powerpc 86xx: Handle CCSR relocation earlier
+
+ Currently, the CCSR gets relocated while translation is
+ enabled, meaning we need 2 BAT translations to get to both the
+ old location and the new location. Also, the DEFAULT
+ CCSR location has a dependency on the BAT that maps the
+ FLASH region. Moving the relocation removes this unnecessary
+ dependency. This makes it easier and more intutive to
+ modify the board's memory map.
+
+ Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same
+ BAT for CCSR space.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit af5d100e8d5cd49d69d52d20f1181eb06ddb4ddf
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Oct 31 17:14:14 2008 -0500
+
+ mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build
+
+ You can't actually have both, and with some coming changes to
+ change the memory map for the board and support 36-bit physical,
+ we need the extra BAT that is being consumed by having both.
+
+ I also make non-PCI configs build cleanly, for the sake of sanity.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 98693b85d42ff438375dc6d6dcadc70eb7b050bb
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Oct 31 17:14:00 2008 -0500
+
+ mpc8641: Stop supporting non-PCI_PNP configs
+
+ We don't actually ever do this, remove the code so we
+ can stop maintaining it.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit e4f69d1bd21a12049744989d2dd6b5199c9b8f23
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Fri Oct 24 12:59:12 2008 +0000
+
+ ColdFire: Fix M5329EVB and M5373EVB nand issue
+
+ Fix compilation issue caused by a few mismatches.
+ Provide proper nand chip select enable/disable in
+ nand_hwcontrol() rather than in board_nand_init()
+ just enable once. Remove redundant local nand driver
+ functions - nand_read_byte(), nand_write_byte() and
+ nand_dev_ready() to use common nand driver.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 1b2708442224a551a0b865b52710306333888932
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Oct 22 11:55:30 2008 +0000
+
+ ColdFire: Fix compilation error
+
+ The error was caused by the change for strmhz() in cpu.c.
+ A few of them were one extra close parenthesis.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 536e7dac16769954915a484e682a2efb28699133
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Oct 22 11:38:21 2008 +0000
+
+ ColdFire: Add MCF5301x CPU and M53017EVB support
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit a21d0c2cc9add8894d971ab791f4032f077db817
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 15:37:02 2008 +0000
+
+ ColdFire: Add SBF support for M52277EVB
+
+ Add serial boot support
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit b202816c61042c183fe67d097a5893b0f2dafba0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 14:19:26 2008 +0000
+
+ ColdFire: Use CFI driver for M5272C3
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit f3962d3f574e5a1cffacd4e9bc48713060a2a314
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 13:47:54 2008 +0000
+
+ ColdFire: Relocate FEC's GPIO and mii functions protocols
+
+ Place FEC pin assignments in cpu_init.c from platform's
+ mii.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 6e80f5aa09f8d41bac50b38dc7488ecd22107802
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 12:15:44 2008 +0000
+
+ ColdFire: Remove platforms mii.c file
+
+ Will use mcfmii.c driver in drivers/net rather than
+ keep creating new mii.c for each future platform.
+ Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB,
+ M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB,
+ M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's
+ mii.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 012522fef3b382469125beb46a315ab4dee02fb0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 10:03:07 2008 +0000
+
+ ColdFire: Modules header files cleanup
+
+ Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG,
+ MDHA, SKHA, INTC, and FlexBus structures and
+ definitions in immap_5xxx.h to more unify modules
+ header files. Append DSPI support for m547x_8x.
+ SSI cleanup. Remove USB Host structure from immap_539.h.
+ Apply changes to use FlexBus structures in mcf52x2's
+ cpu_init.c and platform configuration files.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit ac2331aee99ad36be0fcfed8c49922e3c61b576d
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 08:52:36 2008 +0000
+
+ ColdFire: Remove linker file
+
+ Each different build for M54455EVB and M5235EVB will
+ create a u-boot.lds linker file. It is redundant to
+ keep the u-boot.lds
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 0829323073c505556ed5f5073f91adb504584d45
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Oct 31 11:26:44 2008 -0500
+
+ ppc: Fix compile warnings when !CONFIG_OF_LIBFDT
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a80b21d5127583171d6e9bc7f722947641898012
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 31 12:12:12 2008 +0100
+
+ common/Makefile: create others group for non core, environment and command files
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 60c68d9c1c6d18ce02c862a05718fd94f97c13d0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Oct 31 01:13:37 2008 +0100
+
+ TQM8260: use CFI flash driver instead of custom driver.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 20d04774f4ef3f6e38974636e0e36ae0f0b5501f
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 17:35:30 2008 -0500
+
+ Consolidate MAX/MIN definitions
+
+ There were several, now there is one (two if you count the lower-case
+ versions).
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 298e476c66fd88d0bc4f0371118652d2b5de4e8a
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Oct 30 09:23:09 2008 +0100
+
+ mgsuvd: remove unused defines in config file.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3cbd823116ea8b7c654e275a8c2fca87cd1f5dc5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Nov 2 16:14:22 2008 +0100
+
+ Coding Style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a47f957ab523019992fdef857af01bd71c58a4da
+Author: Alessandro Rubini <rubini-list@gnudd.com>
+Date: Fri Oct 31 22:33:21 2008 +0100
+
+ NAND: Allow NAND and OneNAND to coexist
+
+ This removes in nand.h code that is verbatim duplicated from bbm.h,
+ including directly bbm.h in nand.h. The previous state of affairs
+ prevented compiling code for a board hosting both NAND and OneNAND chips.
+
+ Reported-by: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 2f77c7f45b9a37ef265a8dbe3c18efa706fed214
+Author: Scott Wood <scottwood@freescale.com>
+Date: Fri Oct 31 13:51:12 2008 -0500
+
+ JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled.
+
+ Reported-by: Alessandro Rubini <rubini-list@gnudd.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c57fc28947e248fb03c49a28b467686299895055
+Author: Jason Jin <Jason.Jin@freescale.com>
+Date: Fri Oct 31 05:07:04 2008 -0500
+
+ NAND: Add NAND support for MPC8536DS board
+
+ This patch defines 1M TLB&LAW size for NAND on MPC8536DS, assigns 0xffa00000
+ for CONFIG_SYS_NAND_BASE and adds other NAND supports in config file.
+ It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image.
+
+ Singed-off-by: Jason Jin <Jason.Jin@freescale.com>
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6fc110bd8a8d642b8f7b0653bd9a08a0b7c3d50b
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 31 05:06:14 2008 -0500
+
+ NAND: Fix CONFIG_ENV_ADDR for MPC8572DS
+
+ CONFIG_ENV_ADDR should be (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE).
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 51b572a801be57790fe26adaa530210e7fba59cc
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 24 10:49:48 2008 +0900
+
+ sh: rsk7203: Moved rsk7203 board to board/renesas
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 58453b00b3ebb26aaa901210023f99504a90bb00
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 24 10:48:31 2008 +0900
+
+ sh: MigoR: Moved MigoR board to board/renesas
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c1da2a22817ba85b437afa2f4e715e658b219fd1
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 24 10:39:44 2008 +0900
+
+ sh: r2dplus: Moved r2dplus board to board/renesas
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 78385bf2359d828184d0b3649f7ae6b933420000
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 24 10:36:13 2008 +0900
+
+ sh: sh7763rdp: Moved sh7763rdp board to board/renesas
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c6525d459c350bfc246ea7826456af77e1e314eb
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 24 10:35:19 2008 +0900
+
+ sh: sh7785lcr: Moved sh7785lcr board to board/renesas
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit acd3e30d09a73f876222f0d496c4f52ee9d0771d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 24 10:34:21 2008 +0900
+
+ sh: r7780mp: Moved r7780mp board to board/renesas
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f84e6ea275353b8fea772ec7553ff7e4b1f642e0
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 24 10:32:14 2008 +0900
+
+ sh: ap325rxa: Moved ap325rxa board to board/renesas
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 9abda6ba735efb059f63dcb25d78b174bfcad1ad
+Author: Wolfgang Denk <wd@xpert.denx.de>
+Date: Fri Oct 31 01:12:28 2008 +0100
+
+ CFI Driver: Fix "flash not ready" problem
+
+ This patch fixes a problem on systems where the NOR flash is attached
+ to a 64 bit bus. The toggle bit detection in flash_toggle() is based
+ on the assumption that the same flash address is read twice without
+ any other interjacent flash accesses. However, on 32 bit systems the
+ function flash_read64() [as currently implemented] does not perform
+ an atomic 64 bit read - instead, this is broken down into two 32 bit
+ read accesses on addresses "addr" and "addr + 4". So instead of
+ reading a 64 bit value twice from "addr", we see a sequence of 4 32
+ bit reads from "addr", "addr + 4", "addr", and "addr + 4". The
+ consequence is that flash_toggle() fails to work.
+
+ This patch implements a simple, but somewhat ugly solution, as it
+ avoids the use of flash_read64() in this critical place (by breaking
+ it down manually into 32 bit read operations) instead of rewriting
+ flash_read64() such to perform atomic 64 bit reads as one could
+ expect. However, such a rewrite would require the use of floating
+ point load operations, which becomes pretty complex:
+
+ save MSR;
+ set Floating Point Enable bit in MSR;
+ use "lfd" instruction to perform atomic 64 bit read;
+ use "stfd" to store value to temporary variable on stack;
+ load u64 value from temporary variable;
+ restore saved MSR;
+ return u64 value;
+
+ The benefit-cost ratio of such an implementation was considered too
+ bad to actually attempt this, especially as we can expect that such
+ an implementation would not only have a bigger memory footprint but
+ also cause a performance degradation.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cdd4fe63b094d4b767f12ff241d72566b461ee61
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 31 10:48:08 2008 +0100
+
+ ppc4xx: Fix spelling error in MAINTAINERS file
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit be270798900b75ad9c47c7b79c72f70441196c56
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 28 13:37:00 2008 +0100
+
+ ppc4xx: Update PMC440 board support
+
+ This patch brings PMC440 board support up to date:
+
+ - fix GPIO configuration
+ - add misc_init_f()
+ - use better values for usbact variable
+ - fix USB 2.0 phy reset sequence
+ - shrink BAR2 to save PCI address space
+ - add FDT support
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 75183b1a7fc04206d9779d13f16e03853d7e965d
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 28 13:36:59 2008 +0100
+
+ ppc4xx: Fix PMC440 BSP commands
+
+ This patch fixes the PMC440 BSP commands painit and selfreset
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 76b565b69f886d5ae748db65e44f464b0e70d41a
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 28 13:36:58 2008 +0100
+
+ ppc4xx: Update PMC440 board configuration
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ca0c2d42b93116a8e1b8ef8ad4493c7dc9b5f2e4
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 28 13:36:57 2008 +0100
+
+ ppc4xx: Fix esd loadpci command
+
+ This patch fixes esd's loadpci command when not all
+ memory on adapter boards is accessable via PCI.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 492aa9ea13791ca4591b5bde895a425e27ae2d10
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 28 13:36:56 2008 +0100
+
+ ppc4xx: Clean up PMC440 header
+
+ -Codingstyle cleanup
+ -Remove unused GPIO define
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 295133258a44f97a57fb2ec339aecfda11f4db95
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 28 13:36:55 2008 +0100
+
+ ppc4xx: Handle other board variant in PMC440 FPGA code
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cc2dc9b08cf7c09f9f237f8cb9303f11603d4fb0
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Oct 27 12:35:59 2008 +0100
+
+ ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
+
+ Xilinx ppc440 and ppc405 have many similarities. This patch merge the
+ config files of both infrastuctures
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3befd85633d33c4dcca1f359c3f4848c5ab8e4d2
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 25 06:45:31 2008 +0200
+
+ ppc4xx: Correctly configure the GPIO pin muxing on Arches
+
+ Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO
+ pin multiplexing correctly
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7c84fe6a06dad9f793ed85b39b1e6c11a7882f5c
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Oct 30 23:22:04 2008 +0100
+
+ Fix to the auto-update feature documentation (CONFIG_UPDATE_TFTP_MSEC_MAX)
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 4bc7deee9095f21e243b724ca3d634251c1d5432
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Wed Oct 29 23:27:45 2008 -0500
+
+ libfdt: Fix bug in fdt_subnode_offset_namelen()
+
+ There's currently an off-by-one bug in fdt_subnode_offset_namelen()
+ which causes it to keep searching after it's finished the subnodes of
+ the given parent, and into the subnodes of siblings of the original
+ node which come after it in the tree.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f242a08871839eac081ba5b599af979f3a148a0d
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Tue Oct 28 08:26:52 2008 +0100
+
+ fdt_resize(): ensure minimum padding
+
+ fdt_add_mem_rsv() requires space for a struct fdt_reserve_entry
+ (16 bytes), so make sure that fdt_resize at least adds that much
+ padding, no matter what the location or size of the fdt is.
+
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit d685b74c64a38849f1a129b3ab846fbf67dd937e
+Author: Dave Liu <daveliu@freescale.com>
+Date: Thu Oct 23 21:59:35 2008 +0800
+
+ 74xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
+
+ The patch is following the commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
+
+ mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
+
+ This is needed in unlock_ram_in_cache() because it is called from C and
+ will corrupt the small data area anchor that is kept in R2.
+
+ lock_ram_in_cache() is modified similarly as good coding practice, but
+ is not called from C.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+
+ also, the r2 is used as global data pointer.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit e053ab1903ccae6048ef759025b9f675bba91450
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Oct 28 11:45:04 2008 -0500
+
+ mpc83xx pci: Round up memory size in inbound window.
+
+ The current calculation will fail to cover all memory if
+ its size is not a power of two.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1c671977dc81359628be27ac99c174e76e8069ba
+Author: Dave Liu <daveliu@freescale.com>
+Date: Thu Oct 23 21:19:13 2008 +0800
+
+ 86xx: remove the unused definition
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit eaa44c5dc83756c3067b9e6c9db626facd0b0660
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:47:49 2008 +0800
+
+ 86xx: remove the redundant r2 global data pointer save
+
+ The commit 67256678f00c09b0a7f19e862e5c1847553d31bc add
+ the another global data pointer save, but in fact the
+ global data pointer will be initialized in the board_init_r,
+ so remove it such as the 85xx/83xx family.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Kumar Gala <kumar.gala@freescale.com>
+
+commit bd888e9544419665334a6f47f81f34011cea38f3
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:47:41 2008 +0800
+
+ 86xx: remove the unused code for 86xx family
+
+ I believe these code was copied from 74xx family, but for
+ 86xx, it is unused.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Kumar Gala <kumar.gala@freescale.com>
+
+commit 5ba1ef507402bc5e344dc374203792a40f222e8a
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:46:35 2008 +0800
+
+ 86xx: remove the second DDR LAW setting for mpc8641hpcn
+
+ The DDR1 LAW will precedence the DDR2 LAW, so remove
+ the second DDR LAW.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 137a2dfd11ac51ae3154f13f323609b33a4a072e
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:46:23 2008 +0800
+
+ 86xx: remove the unused ddr_enable_ecc in the board file
+
+ The DDR controller of 86xx processors have the ECC data init
+ feature, and the new DDR code is using the feature, we don't
+ need the way with DMA to init memory again.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Kumar Gala <kumar.gala@freescale.com>
+
+commit dc2adad85bf580d65916c940683f6e9671e8a5dd
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:46:12 2008 +0800
+
+ 86xx: Move the clear_tlbs before MMU turn on
+
+ We must invalidate TLBs before MMU turn on, but
+ currently the code is not, if there are some stale
+ TLB entry valid in the TLBs, it will cause strange
+ issue.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 5cdade07b118d07154cb882650f9778cecc8a87c
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Oct 27 15:57:08 2008 -0500
+
+ mpc8313erdb: Document NAND boot.
+
+ Previously, the documentation claimed that NAND boot is not supported.
+ This is no longer true.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit bd78bc6b2aebf5566aac464f936b88dfd97ab0bd
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Oct 29 14:20:26 2008 -0500
+
+ NAND: Properly create JFFS2 cleanmarkers.
+
+ As reported by Ilko Iliev <iliev@ronetix.at>, the "nand erase clean"
+ command is currently broken, and among other things causes all blocks
+ to be marked bad.
+
+ This implements it properly using MTD_OOB_AUTO, along with some
+ indentation fixes.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit f7fe57c09866b44692d18c8cf22828bd137ec58d
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Oct 29 13:42:41 2008 -0500
+
+ NAND fsl elbc: Set FMR[ECCM] based on page size.
+
+ Hardware expects ECCM 0 for small page and ECCM 1 for large page
+ when booting from NAND, so use those defaults.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c013b74975dab0805ef6d369b013230c4e8a660d
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Oct 29 13:32:59 2008 -0400
+
+ NAND: Add support for MPC8572DS board
+
+ This patch defines 1M TLB&LAW size for NAND on MPC8572DS, assigns
+ 0xffa00000 for CONFIG_SYS_NAND_BASE and adds other NAND supports in
+ config file.
+
+ It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image, to
+ make room for the increased code size with NAND enabled.
+
+ Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 4e190b03aaf2309bd2e025d1187a2ca880fedc95
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Oct 29 11:05:55 2008 -0400
+
+ Make Freescale local bus registers available for both 83xx and 85xx.
+
+ - Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it
+ can be shared by both 83xx and 85xx
+ - Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards
+ files which use lbus83xx_t.
+ - Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that
+ 85xx can share them.
+
+ Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 695c130e4bf75b444720ddfd83aca88f41c046cf
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Oct 27 15:38:30 2008 -0500
+
+ NAND: Align right column of the shorthelp with other commands.
+
+ I accidentally broke this in when making consistent the partial
+ alignment of the longhelp.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 33efde5ecac91ab118ff00b95a181fd6d75f8645
+Author: Karl Beldan <karl.beldan@gmail.com>
+Date: Mon Sep 15 16:08:03 2008 +0200
+
+ NAND: Reset chip on power-up
+
+ Some chips require a RESET after power-up (e.g. Micron MT29FxGxxxxx).
+ The first command sent is NAND_CMD_READID.
+ Issue a NAND_CMD_RESET in nand_scan_ident before reading the device id.
+ Tested with an MT29F4G08AAC.
+
+ Signed-off-by: Karl Beldan <karl.beldan@gmail.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c45912d8abc52de796b9059a58faf7c4166eab58
+Author: Scott Wood <scottwood@freescale.com>
+Date: Fri Oct 24 16:20:43 2008 -0500
+
+ NAND: sync with 2.6.27
+
+ This brings the core NAND code up to date with the Linux kernel.
+
+ Since there were several drivers in Linux as of the last update that are
+ not in u-boot, I'm not bringing over new drivers that have been added
+ since in the absence of an interested party.
+
+ I did not update OneNAND since it was recently synced by Kyungmin Park,
+ and I'm not sure exactly what the common ancestor is.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit b1d0db1805c3395149777e507b6da53410abac4e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 17:25:47 2008 -0500
+
+ bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}
+
+ Added the ability to config out bootm support for Linux, NetBSD, RTEMS
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5a98127d81a6eefc5a78a704df619bfe362eeb87
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 17:25:46 2008 -0500
+
+ bootm: support subcommands in linux ppc bootm
+
+ Add support for 'bdt', 'cmdline', 'prep' to the linux PPC bootm.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 49c3a861d11735838f1f1b11999ce433006dc919
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 17:25:45 2008 -0500
+
+ bootm: Add subcommands
+
+ Add the ability to break the steps of the bootm command into several
+ subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go.
+
+ This allows us to do things like manipulate device trees before
+ they are passed to a booting kernel or setup memory for a secondary
+ core in multicore situations.
+
+ Not all OS types support all subcommands (currently only start, loados,
+ ramdisk, fdt, and go are supported).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit be08315933537f061bc1ce61f33a29c56458bbad
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 17:25:44 2008 -0500
+
+ bootm: Move to using a function pointer table for the boot os function
+
+ This removes a bit of code and makes it easier for the upcoming sub bootm
+ command support to call into the proper OS specific handler.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a369f4a492fa2805d87775d27380f0eeaca35aa6
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Mon Sep 29 23:03:14 2008 +1000
+
+ i386: Renamed show_boot_progress in assembler code
+
+ Renamed show_boot_progress in assembler init phase to
+ show_boot_progress_asm to avoid link conflicts with C version
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 4442f45b0e1cbad35aa22d4cad22b90a57e3f32d
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Oct 27 16:42:00 2008 -0500
+
+ 85xx: Update MPC85xx_PORDEVSR_IO_SEL mask
+
+ The MPC8572 has a 4-bit wide PORDEVSR IO_SEL field. Other MPC85xx
+ processors have a 3-bit wide IO_SEL field but have the most
+ significant bit is wired to 0 so this change should not affect
+ them.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit cd4251624205cb97104f6e32679dc7754934f711
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Oct 27 16:09:42 2008 -0500
+
+ powerpc: fix pci window initialization to work with > 4GB DRAM
+
+ The existing code has a few errors that need to be fixed in
+ order to support large RAM sizes. Fix those, and add a
+ comment to make it clearer.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 219542a1a66ca017b12860920714a9859b18a5d7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Oct 27 13:16:20 2008 -0500
+
+ pci/fsl_pci_init: Removed a bunch pointless trailing backslashes.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6b59e03e0237a40a2305ea385defdfd92000978b
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon Sep 1 16:21:22 2008 +0200
+
+ lcd: Let the board code show board-specific info
+
+ The information displayed when CONFIG_LCD_INFO is set is inherently
+ board-specific, so it should be done by the board code. The current code
+ dealing with this only handles two cases, and is already a horrible mess
+ of #ifdeffery.
+
+ Yes, this duplicates some code, but it also allows boards to print more
+ board-specific information; this used to be very difficult.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 6f93d2b8fca504200a5758f7c6dd2d6852900765
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon Sep 1 16:21:21 2008 +0200
+
+ lcd: Set lcd_is_enabled before clearing the screen
+
+ This allows the logo/info rendering routines to use the regular
+ lcd_putc/lcd_puts/lcd_printf calls.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 15b17ab52b7c15d46d9fc631cc06092e1e764de2
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon Sep 1 16:21:20 2008 +0200
+
+ lcd: Implement lcd_printf()
+
+ lcd_printf() has a prototype in include/lcd.h but no implementation. Fix
+ this by borrowing the lcd_printf() implementation from the cogent board
+ code (which appears to use its own LCD framework.)
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 70dbc54c0a5c798bcf82ae2a1e227404f412e892
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon Sep 1 16:21:19 2008 +0200
+
+ atmel_lcdfb: Straighten out funky vl_sync logic
+
+ If the board _didn't_ request INVLINE_INVERTED, we set INVLINE_INVERTED,
+ otherwise we don't. WTF?
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 23bb28f0f76b46c4b573374b0bb3b3f23d85ef55
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon Sep 1 16:21:18 2008 +0200
+
+ atmel_lcdfb: Eliminate unneeded #include <asm/arch/hardware.h>
+
+ atmel_lcdfb doesn't actually need anything from asm/arch/hardware.h. It
+ includes a file that does, asm/arch/gpio.h, but this file doesn't
+ include <asm/arch/hardware.h> like it's supposed to.
+
+ Add the missing include to asm/arch/gpio.h and remove the workaround
+ from the atmel_lcdfb driver. This makes the driver compile on avr32.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit c2083e0e11a03ef8be2e9f0ed8720fdc20832f3e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 22 14:38:55 2008 -0500
+
+ 86xx: Convert all fsl_pci_init users to new APIs
+
+ Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use
+ fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup().
+
+ With these changes the board code is a bit smaller and we get dma-ranges
+ set in the device tree for these boards.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2dba0dea98c0dee1799ffd6fd6eb541645dbbd98
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 08:28:33 2008 -0500
+
+ 85xx: Convert all fsl_pci_init users to new APIs
+
+ Converted ATUM8548, MPC8536DS, MPC8544DS, MPC8548CDS, MPC8568MDS,
+ MPC8572DS, TQM85xx, and SBC8548 to use fsl_pci_setup_inbound_windows()
+ and ft_fsl_pci_setup().
+
+ With these changes the board code is a bit smaller and we get dma-ranges
+ set in the device tree for these boards.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit a2aab460727e5f674353a83a81000ef794bffcae
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 23 00:01:06 2008 -0500
+
+ pci/fsl_pci_init: Added fdt helper for setting up bus-ranges & dma-ranges
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit b9a1fa9787a3a79573f5f932a4f8aa216bcb1785
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 22 14:06:24 2008 -0500
+
+ pci/fsl_pci_init: Add a common PCI inbound setup function
+
+ Add a common setup function that determines the pci_region(s) based
+ on how much memory we have in the system.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit 612ea01018a459234d54ed57ec6a5a244ce75678
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 10:13:14 2008 -0500
+
+ pci/fsl_pci_init: Enable larger address and setting inbound windows properly
+
+ * PCI Inbound window was setup incorrectly. The PCI address and system
+ address were swapped. The PCI address should be setting piwar/piwbear
+ and the system address should be setting pitar.
+
+ * Removed masking of addresses to allow for system address to support
+ system address & PCI address >32-bits
+
+ * Set PIWBEAR & POTEAR to allow for full 64-bit PCI addresses
+
+ * Respect the PCI_REGION_PREFETCH for inbound windows
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit 8ab451c46b846f2bbd7122b29ffdd9a4a04da228
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 22 23:33:56 2008 -0500
+
+ fdt: Added helper to set PCI dma-ranges property
+
+ Added fdt_pci_dma_ranges() that parses the pci_region info from the
+ struct pci_controller and populates the dma-ranges based on it.
+
+ The max # of windws/dma-ranges we support is 3 since on embedded
+ PowerPC based systems this is the max number of windows.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit 3bed2aaf2d50fd13273c14d17d4fd40ef42e0d0f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 23 00:05:47 2008 -0500
+
+ fdt: Add fdt_getprop_u32_default helpers
+
+ Add helper functions to return find a node and return it's property
+ or a default value.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 8ba93f68a1bae89e033527ce67b41b4a87aa5b7f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 18:06:15 2008 -0500
+
+ 86xx: Enable 64-bit PCI resources on all Freescale boards
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit 0151cbaccf4504821ecfde0217299bd740086bb6
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 11:33:58 2008 -0500
+
+ 85xx: Enable 64-bit PCI resources on all Freescale boards
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit 30e76d5e3bc4c5208ee63585fe12b409d9308cd8
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 08:36:08 2008 -0500
+
+ pci: Allow for PCI addresses to be 64-bit
+
+ PCI bus is inherently 64-bit. While not all system require access to
+ the full 64-bit PCI address range some do. This allows those systems
+ to enable the full PCI address width via CONFIG_SYS_PCI_64BIT.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+
+commit ae5f943ba8ede448a4b1a145fd8911856701ecc5
+Author: Dave Liu <daveliu@freescale.com>
+Date: Thu Oct 23 21:18:53 2008 +0800
+
+ 85xx: Fix the incorrect register used for DDR erratum1
+
+ The 8572 DDR erratum1:
+ DDR controller may enter an illegal state when operating
+ in 32-bit bus mode with 4-beat bursts.
+
+ Description:
+ When operating with a 32-bit bus, it is recommended that
+ DDR_SDRAM_CFG[8_BE] is cleared when DDR2 memories are used.
+ This forces the DDR controller to use 4-beat bursts when
+ communicating to the DRAMs. However, an issue exists that
+ could lead to data corruption when the DDR controller is
+ in 32-bit bus mode while using 4-beat bursts.
+
+ Projected Impact:
+ If the DDR controller is operating in 32-bit bus mode with
+ 4-beat bursts, then the controller may enter into a bad state.
+ All subsequent reads from memory is corrupted.
+ Four-beat bursts with a 32-bit bus only is used with DDR2 memories.
+ Therefore, this erratum does not affect DDR3 mode.
+
+ Work Arounds:
+ To work around this issue, software must set DEBUG_1[31] in
+ DDR memory mapped space (CCSRBAR offset + 0x2f00 for DDR_1
+ and CCSRBAR offset + 0x6f00 for DDR_2).
+
+ Currenlty, the code is using incorrect register DDR_SDRAM_CFG_2
+ as condition, but it should be DDR_SDRAM_CFG register.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit d5b693090ed08d24c18491df9d8fc7387b2906f3
+Author: Dave Liu <daveliu@freescale.com>
+Date: Thu Oct 23 21:17:19 2008 +0800
+
+ 85xx: remove unused config definition
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 0f060c3bf82832331a509f2e5d2442539e7aad09
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 23 01:47:38 2008 -0500
+
+ 85xx: Add basic e500mc core support
+
+ Introduce CONFIG_E500MC to deal with the minor differences between
+ e500v2 and e500mc.
+
+ * Certain fields of HID0/1 don't exist anymore on e500mc
+ * Cache line size is 64-bytes on e500mc
+ * reset value of PIR is different
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a38a5b6edd30f29fd5fdb1d7f674521906c0e677
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 23 01:47:37 2008 -0500
+
+ 85xx: Use CONFIG_SYS_CACHELINE_SIZE instead of magic number
+
+ Using CONFIG_SYS_CACHELINE_SIZE instead of 31 means we can handle
+ e500mc's 64-byte cacheline properly when it gets added.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5deb8022c3749faac30e9ad9694691e2442b5c93
+Author: Georg Schardt <schardt@team-ctech.de>
+Date: Fri Oct 24 13:51:52 2008 +0200
+
+ ppc4xx: New board avnet fx12 minimodul
+
+ This patch adds support for the avnet fx12 minimodul.
+ It needs the "ppc4xx: Generic architecture for xilinx ppc405"
+ patch from Ricardo.
+
+ Signed-off-by: Georg Schardt <schardt@team-ctech.de>
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1f4d53260ec6f8f122aed75cce7c757d97a551e0
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Tue Oct 21 18:29:46 2008 +0200
+
+ ppc4xx: Generic architecture for xilinx ppc405(v3)
+
+ As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx
+ ppc440 boards, this patch presents a common architecture for all the
+ xilinx ppc405 boards.
+
+ Any custom xilinx ppc405 board can be added very easily with no code
+ duplicity.
+
+ This patch also adds a simple generic board, that can be used on almost
+ any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h
+
+ This patch is prepared to work with the latest version of EDK (10.1)
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 485c00a57fab86f72a3769480c66bf1ca22e1459
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 24 08:56:09 2008 +0200
+
+ ppc4xx: Disable DDR2 autocalibration on Kilauea for now
+
+ Since the new autocalibration still has some problems on some Kilauea
+ boards with 200MHz DDR2 frequency we disable the autocalibration and
+ use the hardcoded values as done before. This seems to work reliably
+ on all known DDR2 frequencies.
+
+ After the autocalibration issue is fixed we will enable it again.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f177f4250c729727b1629fa8d8d6556c999e9b8c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Apr 9 02:02:07 2008 -0400
+
+ Blackfin: fix up UART status bit handling
+
+ Some Blackfin UARTs are read-to-clear while others are write-to-clear.
+ This can cause problems when we poll the LSR and then later try and handle
+ any errors detected.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ae0910298f31f5bb3d33a64b8467c60ea3c5d6d0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 20:42:17 2008 -0400
+
+ Blackfin: bf561-ezkit: drop redundant code
+
+ Common Blackfin code already announces CPU information.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e2eea98bff1369f77a9f59a5fd0bd4928bc3332e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 20:43:10 2008 -0400
+
+ Blackfin: bf561-ezkit: drop pointless USB code
+
+ The USB/LAN register settings are not actually used/needed in order to
+ drive things from U-Boot, so drop the code.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c23bff63fb03cb9dbcd26522841e53f9b34fa1ab
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 20:47:58 2008 -0400
+
+ Blackfin: linker scripts: force start.o and set initcode boundaries
+
+ Make sure that the start.o object is always the first object in our linker
+ script regardless of configuration settings, and add some linker symbols
+ so the ldr utility can properly locate the initcode when generating a LDR.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bd33e5c613cf70e3cb51a73fdd653fe83b942bb0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:19:39 2008 -0400
+
+ Blackfin: small cpu init optimization while setting interrupt mask
+
+ Use the sti instruction to set the initial interrupt mask rather than
+ banging on the core IMASK MMR to save both space and time.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 960922291c9594acb575cec7e47d7bed9b58182c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:18:10 2008 -0400
+
+ Blackfin: set initial stack correctly according to Blackfin ABI
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 25cd33d82ea521b7bd90ca858f8919fae1e9732b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Apr 20 03:11:53 2008 -0400
+
+ Blackfin: make baud calculation more accurate
+
+ We should use the algorithm in the Linux kernel so that the UART divisor
+ calculation is more accurate. It also fixes problems on some picky UARTs
+ that have sampling anomalies.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0ba1da116e5edcb0c5ae4a7585d73f6548400a06
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:21:41 2008 -0400
+
+ Blackfin: decode hwerrcause/excause when crashing
+
+ Having to decode hwerrcause/excause values is a pain, so automate it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2de95bb20c488f20298df6881b700a5a757ee780
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:20:54 2008 -0400
+
+ Blackfin: fix register dump messages
+
+ Make sure we report RETI/IPEND correctly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7133999e6f62a9a01f6a8ffe234b8532b3ad1e4b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:19:34 2008 -0400
+
+ Blackfin: don't bother displaying reboot msg when crashing
+
+ The hang function already tells you to reboot, so no point in showing it
+ twice.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 70c4c032ea112cc42aa1ce959c33fc4825eaef95
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 1 01:23:48 2008 -0400
+
+ Blackfin: enable support for nested interrupts
+
+ During cpu init, make sure we initialize the CEC properly so that
+ interrupts can fire and be handled while U-Boot is running.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 39782727e185860faa4884c2b04e84cb33d1c6cf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:55:25 2008 -0400
+
+ Blackfin: init NAND before relocating env
+
+ If booting out of NAND, we need to make sure we initialize it properly
+ before attempting to relocate the environment.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0f9a8819416ba40a53de50af148847a0e508f84d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 18:40:13 2008 -0400
+
+ Blackfin: check cache bits, not cplb bits
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2c1ea9e370cb72dd6a5aa32338e87a8a1f77bd76
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 17:52:59 2008 -0400
+
+ Blackfin: drop unused cache flush code
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 50f0d211912a648e31aa9123b4665a0444bb8ca9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:21:47 2008 -0400
+
+ Blackfin: unify cache handling code
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3c8798983403cb68a827d7a0d09b1134524a1b7d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:39:07 2008 -0400
+
+ Blackfin: only initialize the RTC when actually used
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 621e579b812dd1a2e6777f7cbf6e55e736505823
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:44:33 2008 -0400
+
+ Blackfin: fix SWRST register definition
+
+ The SWRST register is a 16bit, not 32bit, register.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 06121c4e2d183887dcd7a4ca2dcd395b213ea15b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 18:54:57 2008 -0400
+
+ Blackfin: build with -fomit-frame-pointer
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit adbfeeb7b32f737a9738daa583350d2bb9ed017a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 17:50:26 2008 -0400
+
+ Blackfin: document some of the blackfin directories
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e4337968e43698a68ba608369f46d4a4114111ca
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:16:56 2008 -0400
+
+ Blackfin: only enable hardware error irq by default
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2b66f08f257ef6a06785f27b3c6dc2a4cfc9cac4
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:36:43 2008 -0400
+
+ Blackfin: punt old unused mem_init.h header
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bcc121a01608042066a19ab5bff5bcfb805bf406
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:18:55 2008 -0400
+
+ Blackfin: delete unused page_descriptor_table_size define
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 30fb9d24ae16e5b0ed39e5b7cc85981165ca98bc
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:17:03 2008 -0400
+
+ Blackfin: fix typo in boot mode comment and add NAND define
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2e5cbe5461c5c4c6665e318cfe950a5a150d999c
+Author: Ben Maan <moo@cow>
+Date: Thu Aug 7 13:14:21 2008 -0400
+
+ Blackfin: fix port mux defines for BF54x
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0656ef2ba274910d31364fe022f6c7db0051660d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:09:50 2008 -0400
+
+ Blackfin: update anomaly lists
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 50ca95402876cf7bac4e2d4f7855f616a038763f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:08:54 2008 -0400
+
+ Blackfin: unify DSPID/DBGSTAT MMR definitions
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d9d8c7c696dec370ca714c03beb6e79d4c90bd5e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Oct 21 15:53:51 2008 +0200
+
+ Fix strmhz(): avoid printing negative fractions
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4a7f6b750d8de543fdf8e58acd86745010054571
+Author: Richard Retanubun <RichardRetanubun@ruggedcom.com>
+Date: Fri Oct 17 08:55:51 2008 -0400
+
+ mpc83xx: Removed #ifdef CONFIG_MPC834X dependency on upmconfig function
+
+ This is done to allow other 83XX based platforms which also have UPM
+ (e.g. 8360) to configure and use their UPM in u-boot.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3bf1be3c0cfb1129b68cc1474119e5f323536488
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Tue Oct 14 22:58:53 2008 +0400
+
+ mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS
+
+ With this patch u-boot can fixup the dr_mode and phy_type properties
+ for the Dual-Role USB controller.
+
+ While at it, also remove #ifdefs around includes, they are not needed.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b3379f3fd13969934c00097c05754e7a8990fd39
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Oct 8 20:52:54 2008 +0400
+
+ mpc83xx: add ELBC NAND support for the MPC837XEMDS boards
+
+ Though NAND chip is replaceable on the MPC837XE-MDS boards, the
+ current settings don't work with the default chip on the board.
+ Nevertheless Freescale's U-Boot sets the option register correctly,
+ so I just dumped the register from the working u-boot. My guess is
+ that the old settings were applicable for some pilot boards, not
+ found in the production.
+
+ This patch also enables FSL ELBC driver so that we could access
+ the NAND storage in the u-boot.
+
+ The NAND support costs about 45KB, so the u-boot no longer fits
+ into two 128KB NOR flash sectors, thus we also have to adjust
+ environment location: add another 128KB to the monitor length.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+ It is due to hardware design and logic defect, that is the
+ I/O[0:7] of NAND chip is connected to LAD[7:0], so when
+ the NAND chip connected to nLCS3, you have to set up the
+ OR3[BCTLD] = '1' for normal operation, otherwise it will have
+ bus contention due to the pin 48/25 of U60 is enabled.
+
+ Setup the OR3[BCTLD] = '1' , that meaning the LBCTL is not
+ asserted upon access to the NAND chip, keep the default state.
+
+ Acked-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 00f7bbae92e3b13f2b37aeb1def9bb12445521b7
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 2 19:17:33 2008 +0400
+
+ mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards
+
+ The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB,
+ standalone or acting as a PCI agent. User's Guide says:
+
+ - When the CPLD recognizes its location on the PIB it automatically
+ configures RCW to the PCI Host.
+ - If the CPLD fails to recognize its location then it is automatically
+ configured as an Agent and the PCI is configured to an external arbiter.
+
+ This sounds good. Though in the standalone setup the CPLD sets PCI_HOST
+ flag (it's ok, we can't act as PCI agents since we receive CLKIN, not
+ PCICLK), but the CPLD doesn't set the ARBITER_ENABLE flag, and without
+ any arbiter bad things will happen (here the board hangs during any config
+ space reads).
+
+ In this situation we must disable the PCI. And in case of anybody really
+ want to use an external arbiter, we provide "pci_external_aribter"
+ environment variable.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1da83a63d8e1b4bddeb82581b1745a09aac3e2d3
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 2 18:32:25 2008 +0400
+
+ mpc83xx: add SGMII riser module support for the MPC8378E-MDS boards
+
+ This involves configuring the SerDes and fixing up the flags and
+ PHY addresses for the TSECs.
+
+ For Linux we also fix up the device tree.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e6d9c8916de9c24f2c52d0b01cf00d2e74a04cd8
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 2 18:31:59 2008 +0400
+
+ mpc83xx: add TSECs' HRCWH masks for MPC837x processors
+
+ We'll use these masks to parse TSEC modes out of HRCWH.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6f9cc6608b4e1cefde56c0fb99ae1c95c42575ff
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 2 18:31:56 2008 +0400
+
+ mpc83xx: serdes: add forgotten shifts for rfcks
+
+ The rfcks should be shifted by 28 bits left. We didn't notice the bug
+ because we were using only 100MHz clocks (for which rfcks == 0).
+
+ Though, for SGMII we'll need 125MHz clocks.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 55c531984dcf933e4cd13a187a7e08e873b7ced1
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 2 18:31:53 2008 +0400
+
+ mpc83xx: fix serdes setup for the MPC8378E boards
+
+ MPC837xE specs says that SerDes1 has:
+
+ — Two lanes running x1 SGMII at 1.25 Gbps;
+ — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
+
+ And for SerDes2:
+
+ — Two lanes running x1 PCI Express at 2.5 Gbps;
+ — One lane running x2 PCI Express at 2.5 Gbps;
+ — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
+
+ The spec also explicitly states that PEX options are not valid for
+ the SD1.
+
+ Nevertheless MPC8378 RDB and MDS boards configure the SD1 for PEX,
+ which is wrong to do.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5c2ff323a94e27e481f70c44838d43fcd844dd46
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Sep 10 18:12:37 2008 +0400
+
+ mpc83xx: mpc8360emds: rework LBC SDRAM setup
+
+ Currently 64M of LBC SDRAM are mapped at 0xF0000000 which makes
+ it difficult to use (b/c then the memory is discontinuous and
+ there is quite big memory hole between the DDR/SDRAM regions).
+
+ This patch reworks LBC SDRAM setup so that now we dynamically
+ place the LBC SDRAM near the DDR (or at 0x0 if there isn't any
+ DDR memory).
+
+ With this patch we're able to:
+
+ - Boot without external DDR memory;
+ - Use most "DDR + SDRAM" setups without need to support for
+ sparse/discontinuous memory model in the software.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit def0819e920b05b34b56d8b42e1e43d9b89a52d6
+Author: Wolfgang Denk <wd@xpert.denx.de>
+Date: Tue Oct 21 11:23:56 2008 +0200
+
+ FDT: don't use private kernel header files
+
+ On some systems (for example Fedora Core 4) U-Boot builds with the
+ following wanrings only:
+
+ ...
+ In file included from /home/wd/git/u-boot/include/libfdt_env.h:33,
+ from fdt.c:51:
+ /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead!
+
+ This patch fixes this problem.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f4d14c55504ce40287321bd63ee269e3233ee4ae
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 13 15:15:31 2008 +0200
+
+ ppc4xx: Add 1.0 & 1.066 GHz to canyonlands bootstrap command for PLL setup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 43cbce69d48d052574d71f50724be546d90a46a4
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 13 10:45:14 2008 +0200
+
+ ppc4xx: Correctly setup ranges property in ebc node
+
+ Previously only the NOR flash mapping was written into the ranges
+ property of the ebc node. This patch now writes all enabled chip
+ select areas into the ranges property.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d7b26d58328f137471ea97de382bfa63f7239931
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Wed Oct 8 15:37:50 2008 +0200
+
+ ppc4xx: Add GDSys neo 405EP board support
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c11da194545d2f4bbb54be1bb5e504e20ce8c16c
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Wed Oct 1 14:46:13 2008 +0200
+
+ ppc4xx: Update configs for Netstal boards
+
+ I reorganized my config files, putting the common stuff into netstal-common.h
+ (got the idea by looking a amcc-common.h from Stefan).
+
+ Added stuff to boot the new powerpc linux via NFS (only tested with HCU4).
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c9c11d751e4242cf29c3c3c290d971f6d0cb1d15
+Author: Adam Graham <agraham@amcc.com>
+Date: Wed Oct 8 10:13:19 2008 -0700
+
+ ppc4xx: Add routine to retrieve CPU number
+
+ Provide a weak defined routine to retrieve the CPU number for
+ reference boards that have multiple CPU's. Default behavior
+ is the existing single CPU print output. Reference boards with
+ multiple CPU's need to provide a board specific routine.
+ See board/amcc/arches/arches.c for an example.
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 59217bae40e90982ab5400d849c08af683ace036
+Author: Adam Graham <agraham@amcc.com>
+Date: Wed Oct 8 10:13:14 2008 -0700
+
+ ppc4xx: Add static support for 44x IBM SDRAM Controller
+
+ This patch add the capability to configure a PPC440 based IBM SDRAM
+ Controller with static, compiled-in, values. PPC440 memory subsystem
+ includes a Memory Queue core.
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f09f09d3899017aaaa2b031bba63c271e9c48e4d
+Author: Adam Graham <agraham@amcc.com>
+Date: Wed Oct 8 10:12:53 2008 -0700
+
+ ppc4xx: Add AMCC Arches board support (dual 460GT)
+
+ The Arches Evaluation board is based on the AMCC 460GT SoC chip.
+ This board is a dual processor board with each processor providing
+ independent resources for Rapid IO, Gigabit Ethernet, and serial
+ communications. Each 460GT has it's own 512MB DDR2 memory, 32MB NOR
+ FLASH, UART, EEPROM and temperature sensor, along with a shared debug
+ port. The two 460GT's will communicate with each other via shared
+ memory, Gigabit Ethernet and x1 PCI-Express.
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 055b12f2ffd7c34eea7e983a0588b24f2e69e0e3
+Author: Wolfgang Denk <wd@xpert.denx.de>
+Date: Sun Oct 19 21:54:30 2008 +0200
+
+ TQM8260: environment in flash instead EEPROM, baudrate 115k
+
+ Several customers have reported problems with the environment in
+ EEPROM, including corrupted content after board reset. Probably the
+ code to prevent I2C Enge Conditions is not working sufficiently.
+
+ We move the environment to flash now, which allows to have a backup
+ copy plus gives much faster boot times.
+
+ Also, change the default console initialization to 115200 bps as used
+ on most other boards.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1836881190b3d8a6918b0d64b39fe32bbbdf85d8
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sun Oct 19 12:49:19 2008 -0500
+
+ 85xx: Fix compile warning in mpc8536ds.c
+
+ mpc8536ds.c: In function 'is_sata_supported':
+ mpc8536ds.c:615: warning: unused variable 'devdisr'
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8ed44d91c8122d00368523b0b746691c895d3b3c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 19 02:35:50 2008 +0200
+
+ Cleanup: fix "MHz" spelling
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 08ef89ecd174969b3544f3f0c7cd1de3c57f737b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 19 02:35:49 2008 +0200
+
+ Use strmhz() to format clock frequencies
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d50c7d4be150b2252c0d2e16cfcf69643bdd6dc9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 19 02:35:48 2008 +0200
+
+ strmhz(): Round numbers when printing clock frequencies
+
+ Round clock frequencies for printing.
+
+ Many boards printed off clock frequencies like 399 MHz instead of the
+ exact 400 MHz because numberes were not rounded. This is fixed now.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 681c02d05b29c6d46093525052c74b9c4ddc8b08
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Oct 20 15:16:47 2008 -0500
+
+ 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG
+
+ Commit f7d190b1 corrected the value of MPC85xx_PORDEVSR2_SEC_CFG, but forgot
+ to add a comment that the correct value disagrees with the 8544 reference
+ manual. The changelog for that commit is also wrong, as it says "bit 28"
+ when it should be "bit 24".
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 360fe71e82b83e264c964c9447c537e9a1f643c8
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 18:24:06 2008 +0200
+
+ mgcoge: add redundant environment sector
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 53ebf0c470c87d5f9fa76462e5f4064d26a9b16a
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 18:23:27 2008 +0200
+
+ mgsuvd: update size of environment
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 2e26d837f11460c0e6dede7d65424a31e0183d09
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Oct 10 11:41:00 2008 +0800
+
+ Enabled the Freescale SGMII riser card on 8536DS
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 7e183cad0c5ab6415dca95d6ac290ea918b28c55
+Author: Liu Yu <yu.liu@freescale.com>
+Date: Fri Oct 10 11:40:59 2008 +0800
+
+ Enabled the Freescale SGMII riser card on 8572DS
+
+ This patch based on Andy's work.
+ Including command 'pixis_set_sgmii' support.
+
+ Signed-off-by: Liu Yu <yu.liu@freescale.com>
+
+commit bff188baf9427c35745356439435acf3864d4c65
+Author: Liu Yu <yu.liu@freescale.com>
+Date: Fri Oct 10 11:40:58 2008 +0800
+
+ Make pixis_set_sgmii more general to support MPC85xx boards.
+
+ The pixis sgmii command depend on the FPGA support on the board, some 85xx
+ boards support SGMII riser card but did not support this command, define
+ CONFIG_PIXIS_SGMII_CMD for those boards which support the sgmii command.
+
+ Not like 8544, 8572 has 4 eTsec so that the other two's pixis bits
+ are not supported by 8544. Therefor, define PIXIS_VSPEED2_MASK and
+ PIXIS_VCFGEN1_MASK in header file for both boards.
+
+ Signed-off-by: Liu Yu <yu.liu@freescale.com>
+
+commit 5e981d683d2363204c76773941c2e9c2044c808f
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Oct 8 23:38:02 2008 -0500
+
+ Add cpu/8xxx to TAGS_SUBDIRS
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit e1f7d22b8b52fc08c4d17a6a7db1e664281aed63
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Oct 9 01:25:55 2008 -0500
+
+ fsl_law clear enable before changing.
+
+ Debug sessions may have left enabled laws.
+ Changing lawbar with an unkown enabled tgtid could cause problems.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 86be510f7b5443e7e937f696bfbe037fdc740b15
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Oct 9 00:29:27 2008 -0500
+
+ mpc8572 additional end-point mode
+
+ mpc8572 supports all pcie controllers as end-points with cfg_host_agent=0.
+ Include host_agent == 0 decode for end-point determination.
+
+ This is not needed for the ds reference board since pcie3 will be a host
+ in order to connect to the uli chip. Include it here as a reference for
+ other mpc8572 boards.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 6856b3d0221a838580e6bb06f61425fd7529ba93
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Oct 8 23:37:59 2008 -0500
+
+ 85xx if NUM_CPUS>1, print cpu number
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit f7fecc3e25050a036c9f50f0d2b85bc3199a96e0
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Oct 8 23:38:01 2008 -0500
+
+ pixis do not print long help if not configured
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 0e17f02a8a78d85225a4d805f6a1ea95a0a460b5
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Oct 7 08:09:50 2008 -0500
+
+ Have u-boot pass stashing parameters into device tree
+
+ Some cores don't support ethernet stashing at all, and some
+ instances have errata. Adds 3 properties to gianfar nodes
+ which support stashing. For now, just add this support to
+ 85xx SoCs.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit c21617fd265b7c126c6e2f2d8a23cdb00d4fade7
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 12:37:57 2008 -0400
+
+ Add DDR options setting on MPC8641HPCN board
+
+ * Add board specific parameter table to choose correct cpo, clk_adjust,
+ write_data_delay based on board ddr frequency and n_ranks.
+
+ * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 4ca06607d60d0a6378812ef58fd1eab2a7f77111
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 12:37:41 2008 -0400
+
+ Add ddr interleaving suppport for MPC8572DS board
+
+ * Add board specific parameter table to choose correct cpo, clk_adjust,
+ write_data_delay, 2T based on board ddr frequency and n_ranks.
+
+ * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.
+
+ * Set memory controller interleaving mode to bank interleaving, and disable
+ bank(chip select) interleaving mode by default, because the default on-board
+ DDR DIMMs are 2x512MB single-rank.
+
+ * Change CONFIG_ICS307_REFCLK_HZ from 33333333 to 33333000.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 1f293b417ac6ab8e317ca2b770377ca93edf2370
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 12:37:26 2008 -0400
+
+ Add debug information for DDR controller registers
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit c9ffd839b1ada502c86f88edaf1534426b6688ce
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 12:37:10 2008 -0400
+
+ Check DDR interleaving mode
+
+ * Check DDR interleaving mode from environment by reading memctl_intlv_ctl and
+ ba_intlv_ctl.
+ * Print DDR interleaving mode information
+ * Add doc/README.fsl-ddr to describe the interleaving setting
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit dfb49108e4f86c2224e1f30124328b0de66ef72e
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 12:36:55 2008 -0400
+
+ Pass dimm parameters to populate populate controller options
+
+ Because some dimm parameters like n_ranks needs to be used with the board
+ frequency to choose the board parameters like clk_adjust etc. in the
+ board_specific_paramesters table of the board ddr file, we need to pass
+ the dimm parameters to the board file.
+
+ * move ddr dimm parameters header file from /cpu to /include directory.
+ * add ddr dimm parameters to populate board specific options.
+ * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit dbbbb3abeff325855cae76e33d69d5665631443f
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 12:36:39 2008 -0400
+
+ Make DDR interleaving mode work correctly
+
+ Fix some bugs:
+ 1. Correctly set intlv_ctl in cs_config.
+ 2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled.
+ 3. Set base_address and total memory for each ddr controller in memory
+ controller interleaving mode.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 1c9aa76bf9013069e24258f46f4687c9f98a02d6
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Sep 22 23:40:42 2008 -0500
+
+ 85xx: Enable interrupt and setexpr commands on Freescale 85xx boards
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7c0d4a7508d252d2d7c137eeb376814132dda30f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Sep 22 14:11:11 2008 -0500
+
+ 85xx: Improve flash remapping on MPC8572DS & MPC8536DS
+
+ Changing the flash from cacheable to cache-inhibited was taking a significant
+ amount of time due to the fact that we were iterating over the full 256M of
+ flash. Instead we can just flush the L1 d-cache and invalidate the i-cache.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 54e091d3b603a3332c619199ca83a07e95960da4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Sep 22 14:11:10 2008 -0500
+
+ 85xx: Export invalidate_{i,d}cache and add flush_dcache
+
+ Added the ability for C code to invalidate the i/d-cache's and
+ to flush the d-cache. This allows us to more efficient change mappings
+ from cache-able to cache-inhibited.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6250f0f6297c5ba9aecdea6290799a95c5d4b1da
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 16:11:52 2008 +0200
+
+ mgcoge, mgsuvd: extract more common code
+
+ in ft_blob_update () for both boards was an unneccessary
+ repetition of code, which this patch moves in a common
+ function for this boards.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 9e299192ca9850cf725456388042a5aa5a6f3ec7
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 12:15:55 2008 +0200
+
+ mgcoge, mgsuvd: use in_*/out_* accesors
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit a21ca95f8b9dca22714952b348e4905ac157b5cd
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 13:52:51 2008 +0200
+
+ mgsuvd: fix compiler warning when using soft_i2c driver
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit cac9cf7875c2a01d63422820ed4732a9bdf5ab7b
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 12:15:05 2008 +0200
+
+ mgsuvd: fix coding style
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 5f4c3137f4f051787707c548133823f1656eb508
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 12:13:30 2008 +0200
+
+ mgcoge: Second Flash on CS5 not on CS1
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 76da19df5b8e186d269f29190696bd31fb6c836b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 16 21:52:08 2008 -0500
+
+ Added arch_lmb_reserve to allow arch specific memory regions protection
+
+ Each architecture has different ways of determine what regions of memory
+ might not be valid to get overwritten when we boot. This provides a
+ hook to allow them to reserve any regions they care about. Currently
+ only ppc, m68k and sparc need/use this.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e02d4a9904c8f36395994c0c81469d552b82f5ea
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Oct 16 16:32:35 2008 +0200
+
+ mgcoge: added CONFIG_FIT to support the new u-boot image format
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 6d0f6bcf337c5261c08fabe12982178c2c489d76
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Oct 16 15:01:15 2008 +0200
+
+ rename CFG_ macros to CONFIG_SYS
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 71edc271816ec82cf0550dd6980be2da3cc2ad9e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Oct 13 14:12:55 2008 -0500
+
+ 74xx/7xx/86xx: Rename flush_data_cache to flush_dcache to match 85xx version
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b799cb4c0eebb0762e91e9653d8b9cc9a98440e3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Sep 23 10:05:02 2008 -0500
+
+ Expose command table search for sub-commands
+
+ Sub-command can benefit from using the same table and search functions
+ that top level commands have. Expose this functionality by refactoring
+ find_cmd() and introducing find_cmd_tbl() that sub-command processing
+ can call.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f7e51b27508446f8cae3927975817137979ad5e8
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:41:33 2008 +0200
+
+ mgsuvd, mgcoge: added BOOTCOUNT feature.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 8f64da7f83b553889bc08400c97047998382e9d2
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:41:00 2008 +0200
+
+ mgcoge, mgsuvd: added support for the IVM EEprom.
+
+ The EEprom contains some Manufacturerinformation,
+ which are read from u-boot at boot time, and saved
+ in same hush shell variables.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 81473f67810c4c9b7efaed8dee258ed6bc4c7983
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:40:28 2008 +0200
+
+ hush: add showvar command for hush shell.
+
+ This new command shows the local variables defined in
+ the hush shell:
+
+ => help showvar
+ showvar
+ - print values of all hushshell variables
+ showvar name ...
+ - print value of hushshell variable 'name'
+
+ Also make the set_local_var() and unset_local_var ()
+ no longer static, so it is possible to define local
+ hush shell variables at boot time. If CONFIG_HUSH_INIT_VAR
+ is defined, u-boot calls hush_init_var (), where
+ boardspecific code can define local hush shell
+ variables at boottime.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 67b23a322848d828a5e45c0567b72762bfde7abf
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:39:47 2008 +0200
+
+ I2C: adding new "i2c bus" Command to the I2C Subsystem.
+
+ With this Command it is possible to add new I2C Busses,
+ which are behind 1 .. n I2C Muxes. Details see README.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit c24853644ddd2dd2e4246b5854a93e6254a14092
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:39:08 2008 +0200
+
+ mgcoge, mgsuvd: add board specific I2C deblocking mechanism.
+
+ As documented in doc/I2C_Edge_Conditions, adding a
+ board specific deblocking mechanism via CFG_I2C_INIT_BOARD
+ for the mgcoge and mgsuvd board.
+
+ This code was originally written by Keymile in association
+ with Anatech and Atmel in 1998. The Code toggels the SCL
+ until the SCA line goes to HIGH (max. 16 times).
+ And after this, a start condition is sent.
+
+ This is another approach to deblock the I2C Bus. The
+ soft I2C driver actually sends 9 clocks with SDA High,
+ and then a stop at the end, to deblock the I2C Bus.
+
+ Maybe we should use the approach from Keymile as
+ the new standard?
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 4ca107effebfbabac1057c39632105dacef95957
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:38:38 2008 +0200
+
+ soft_i2c: Add CFG_I2C_INIT_BOARD option
+
+ This patch adds the option for a boardspecific
+ I2C deblocking mechanism for the soft i2c driver.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit e5e4edd9f1f76210a09c34ee835f6cff60fdbbd1
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:38:07 2008 +0200
+
+ mgcoge, mgsuvd: add DTT (LM75) support.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 8e442df438ab677057571e3ac01846bff7719bce
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:37:34 2008 +0200
+
+ lm75: Make the LM75 MULTI_BUS compatible.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 12f1678127c1df2b2878ba93c88948bedc060775
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:37:04 2008 +0200
+
+ lm75: fix Codingstyle issues.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit f2202450c75ba6934b356024101500ddcde6e2a6
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:36:33 2008 +0200
+
+ mgcoge, mgsuvd: added EEprom support.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 9661bf9d120f760238b2a073b84f2baf05010057
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:36:03 2008 +0200
+
+ mgcoge, mgsuvd: add I2C support.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 98aed379586a155292efbf3209356836584b601c
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:35:26 2008 +0200
+
+ soft_i2c: prevent compiler warnings if driver does not use CPU Pins.
+
+ This patch fixes the following warnings, when using
+ the soft_i2c driver using no CPU pins on MPC82xx or MPC8xx
+ systems:
+
+ soft_i2c.c: In function 'send_reset':
+ soft_i2c.c:93: warning: unused variable 'immr'
+ soft_i2c.c: In function 'send_start':
+ soft_i2c.c:124: warning: unused variable 'immr'
+ soft_i2c.c: In function 'send_stop':
+ soft_i2c.c:146: warning: unused variable 'immr'
+ soft_i2c.c: In function 'send_ack':
+ soft_i2c.c:171: warning: unused variable 'immr'
+ soft_i2c.c: In function 'write_byte':
+ soft_i2c.c:196: warning: unused variable 'immr'
+ soft_i2c.c: In function 'read_byte':
+ soft_i2c.c:244: warning: unused variable 'immr'
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 799b784aa00cb03a352847ab9f9acdde79b72d21
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:34:45 2008 +0200
+
+ i2c: add CONFIG_I2C_MULTI_BUS for soft_i2c and mpc8260 i2c driver.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 0809ea2f4340ab2047400c7d3d3047f97987d0fd
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:34:05 2008 +0200
+
+ mgcoge: fix Coding Style issues.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit e43a27c49712203fe8848a17714330623edfb2eb
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:33:30 2008 +0200
+
+ I2C: add new command i2c reset.
+
+ If I2C Bus is blocked (see doc/I2C_Edge_Conditions),
+ it is not possible to get out of this, until the
+ complete Hardware gets a reset. This new commando
+ calls again i2c_init (and that calls i2c_init_board
+ if defined), which will deblock the I2C Bus.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 86e9cdf8c415c1a9725e9dae5237ba1e7bd9f686
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:32:25 2008 +0200
+
+ mgsuvd, mgcoge: move this 2 boards in one dir.
+
+ There are some more extensions, which are for both boards
+ and some more boards from this manufacturer will follow soon.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1c6fe6eac75d695fde677af8330c0dbe75fb6a2b
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Wed Oct 8 13:44:27 2008 +0200
+
+ hwmon: Add LM63 support
+
+ This patch adds support for the National LM63 temperature
+ sensor with integrated fan control. It's used on the GDSys
+ Neo board (405EP) which will be submitted later.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 7ba890bf2f2b92831420243c058951aa831119fd
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Wed Oct 8 11:01:17 2008 +0900
+
+ Add Red Black Tree support
+
+ Now it's used at UBI module. Of course other modules can use it.
+ If you want to use it, please define CONFIG_RBTREE
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit fbd85ad65dd9c98f36ed3fb12fe41f381b7d4794
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date: Mon Oct 6 16:10:53 2008 -0400
+
+ CONFIG_EFI_PARTITION: Added support for EFI partition in cmd_ext2fs.c
+
+ Added support for CONFIG_EFI_PARTITION to ext2 commands.
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+
+commit 07f3d789b9beb7ce3278c974f4d5c8f51b6ab567
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date: Fri Sep 26 11:13:22 2008 -0400
+
+ Add support for CONFIG_EFI_PARTITION (GUID Partition Table)
+
+ The GUID (Globally Unique Identifier) Partition Table (GPT) is a part
+ of EFI. See http://en.wikipedia.org/wiki/GUID_Partition_Table
+
+ Based on linux/fs/partitions/efi.[ch]
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+
+commit fbc87dc0546dff709b38f358e2c5d5e39c4ca374
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Oct 1 15:26:32 2008 +0200
+
+ FIT: output image load address for type 'firmware', fix message while there
+
+ Now that the auto-update feature uses the 'firmware' type for updates, it is
+ useful to inspect the load address of such images.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 4bae90904b69ce3deb9f7c334ef12ed74e18a275
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Oct 1 15:26:31 2008 +0200
+
+ Automatic software update from TFTP server
+
+ The auto-update feature allows to automatically download software updates
+ from a TFTP server and store them in Flash memory during boot. Updates are
+ contained in a FIT file and protected with SHA-1 checksum.
+
+ More detailed description can be found in doc/README.update.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 3f0cf51dabacc2724731c5079a60ea989103bb8f
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Oct 1 15:26:27 2008 +0200
+
+ flash: factor out adjusting of Flash address to the end of sector
+
+ The upcoming automatic update feature needs the ability to adjust an
+ address within Flash to the end of its respective sector. Factor out
+ this functionality to a new function flash_sect_roundb().
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e83cc06375ac2bea0830c6ed0f9d8fdc3c1b27d5
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Oct 1 15:26:29 2008 +0200
+
+ net: Make TFTP server timeout configurable
+
+ There are two aspects of a TFTP transfer involving timeouts:
+ 1. timeout waiting for initial server reply after sending RRQ
+ 2. timeouts while transferring actual data from the server
+
+ Since the upcoming auto-update feature attempts a TFTP download during each
+ boot, it is undesirable to have a long delay when the TFTP server is not
+ available. Thus, this commit makes the server timeout (1.) configurable by two
+ global variables:
+
+ TftpRRQTimeoutMSecs
+ TftpRRQTimeoutCountMax
+
+ TftpRRQTimeoutMSecs overrides default timeout when trying to connect to a TFTP
+ server, TftpRRQTimeoutCountMax overrides default number of connection retries.
+ The total delay when trying to download a file from a non-existing TFTP server
+ is TftpRRQTimeoutMSecs x TftpRRQTimeoutCountMax milliseconds.
+
+ Timeouts during file transfers (2.) are unaffected.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 49f3bdbba8071f56d950a9498b6cdb998b35340a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Oct 1 15:26:28 2008 +0200
+
+ net: express the first argument to NetSetTimeout() in milliseconds
+
+ Enforce millisecond semantics of the first argument to NetSetTimeout() --
+ the change is transparent for well-behaving boards (CFG_HZ == 1000 and
+ get_timer() countiing in milliseconds).
+
+ Rationale for this patch is to enable millisecond granularity for
+ network-related timeouts, which is needed for the upcoming automatic
+ software update feature.
+
+ Summary of changes:
+ - do not scale the first argument to NetSetTimeout() by CFG_HZ
+ - change timeout values used in the networking code to milliseconds
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c68a05feeb88de9fcf158e67ff6423c4cc988f88
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date: Mon Sep 29 18:28:23 2008 -0400
+
+ Adds two more ethernet interface to 83xx
+
+ Added as a convenience for other platforms that uses MPC8360 (has 8 UCC).
+ Six eth interface is chosen because the platform I am using combines
+ UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 41410eee472b0f42e03a77f961bbc55ef58f3c01
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Sep 24 11:42:12 2008 -0500
+
+ Change UEC PHY interface to RGMII on MPC8568MDS
+
+ Change UEC phy interface from GMII to RGMII on MPC8568MDS board
+
+ Because on MPC8568MDS, GMII interface is only recommended for 1000Mbps speed,
+ but RGMII interface can work at 10/100/1000Mbps, and RGMII interface works more stable.
+
+ Now both UEC1 and UEC2 can work properly under u-boot.
+
+ It is also in consistent with the kernel setting for 8568 UEC phy interface.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b59b16ca24bc7e77ec113021a6d77b9b32fcf192
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Oct 18 21:30:31 2008 +0200
+
+ Prepare v2008.10 release: update CHANGELOG & Makefile
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f7a35a60cf45491871a5c28e9ad24db005487857
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 18:24:06 2008 +0200
+
+ mgcoge: add redundant environment sector
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c2537ee85954af9d036b18b644f3e18d837bf4a5
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 18:23:27 2008 +0200
+
+ mgsuvd: update size of environment
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit fa7b1c07e9371aea8f87ee6d3c2ea5564bd8cc8d
+Author: Lepcha Suchit <Suchit.Lepcha@freescale.com>
+Date: Thu Oct 16 13:38:00 2008 -0500
+
+ 83xx NAND boot: wait for LTESR[CC]
+
+ At least some revisions of the 8313, and possibly other chips, do not
+ wait for all pages of the initial 4K NAND region to be loaded before
+ beginning execution; thus, we wait for it before branching out of the
+ first NAND page.
+
+ This fixes warm reset problems when booting from NAND on 8313erdb.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit bf29e0ea0af03d593c64614136acc723a7a022a2
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Oct 17 12:54:18 2008 +0200
+
+ ppc4xx: PPC44x MQ initialization
+
+ Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
+ values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
+ dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
+
+ Previously the appropriate initialization had been made in Linux, by the
+ ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
+ registers after normal operation has begun is not supported and could
+ have unpredictable results.
+
+ Comment from Stefan: This patch doesn't change the resulting value of the
+ MQ registers. It explicitly sets/clears all bits to the desired state which
+ better documents the resulting register value instead of relying on pre-set
+ default values.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ec081c2c190148b374e86a795fb6b1c49caeb549
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 17 12:51:46 2008 +0200
+
+ ppc4xx: PPC44x MQ initialization
+
+ Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
+ values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
+ dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
+
+ Previously the appropriate initialization had been made in Linux, by the
+ ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
+ registers after normal operation has begun is not supported and could
+ have unpredictable results.
+
+ Comment from Stefan: This patch doesn't change the resulting value of the
+ MQ registers. It explicitly sets/clears all bits to the desired state which
+ better documents the resulting register value instead of relying on pre-set
+ default values.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f7d190b1c0b3ab7fc53074ad2862f7de99de37ff
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 16 21:58:50 2008 -0500
+
+ 85xx: Using proper I2C source clock divider for MPC8544
+
+ The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being
+ bit 26, instead it should be bit 28. This caused in incorrect
+ interpretation of the i2c_clk which is the same as the SEC clk on
+ MPC8544. The SEC clk is controlled by cfg_sec_freq that is reported
+ in PORDEVSR2.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 42653b826adb319a1df06e24ef26096b2a5d9d2a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 16 21:58:49 2008 -0500
+
+ Revert "85xx: Using proper I2C source clock divider for MPC8544"
+
+ This reverts commit dffd2446fb041f38ef034b0fcf41e51e5e489159.
+
+ The fix introduced by this patch is not correct. The problem is
+ that the documentation is not correct for the MPC8544 with regards
+ to which bit in PORDEVSR2 is for the SEC_CFG.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2179c4766bffeece98e5e92040629a96c97e230c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 15 10:19:41 2008 -0500
+
+ 85xx: Fix compile warning
+
+ mpc8536ds.c: In function 'is_sata_supported':
+ mpc8536ds.c:614: warning: unused variable 'devdisr'
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9029b68f3f81b3013044f167ea025e836e6c8c0e
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Wed Oct 15 10:40:24 2008 +0800
+
+ Fix the function conflict in x86emu when DEBUG is on
+
+ The function parse_line() in common/main.c was exposed globally by commit
+ 6636b62a6efc7f14e6e788788631ae7a7fca4537, Result in conflict with the same
+ name funciton in drivers/bios_emulator/x86emu/debug.c when define the DEBUG.
+ This patch fix this by renaming the function in the debug.c file.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit b4dbacf69a669a17487054552fc2761149dd6767
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Oct 15 15:50:45 2008 +0200
+
+ Coding Style cleanup, update CHANGELOG, prepare 2008.10-rc3
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 374b9038293d01d8744a46af9b7854a6fd99b228
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:51:19 2008 +0200
+
+ Fix compiler warning in lib_ppc/board.c
+
+ Fix compiler warning introduced by commit 0f8cbc18
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9724555755a6f1066636481b41f7094e0ce93a69
+Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+Date: Thu Oct 9 10:29:14 2008 +0530
+
+ mpc83xx: wait till UPM completes the write to array
+
+ Reference manual states that MxMR[MAD] increment is the indication
+ of write to UPM array is complete. Honour that. Also, make the dummy
+ write explicit.
+
+ also fix the comment.
+
+ Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 03e2dbb18e858e2f7a6aaa437f290f3690d02d51
+Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+Date: Wed Oct 8 18:12:20 2008 -0500
+
+ Remove unwanted ';' at end of define.
+
+ Currently this is not creating any problem. But it will result
+ in compilation error when used as below.
+
+ printf("CFG_SDRAM_CFG2 - %08x\n", CFG_SDRAM_CFG2);
+
+ Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+
+ continuation of the theme based on git grep "^#define CFG_.*;$" include/
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b2934a56650e9a6c54432f9ce6dc36757967385e
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Mon Oct 6 10:53:59 2008 -0400
+
+ ARM DaVinci: Add maintainer information for SFFSDR board.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 12c6670f873ed632c264a6f3e8bf1297d5c3ddbc
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sat Oct 4 19:26:16 2008 +0200
+
+ api: fix type mismatch
+
+ This patch fixes a type mismatch and thus removes a compiler
+ warning when compiling with CONFIG_API on powerpc.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 9bc2e4eee3bcb8e63847d7a733e0c607807d6141
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Oct 1 12:25:04 2008 -0500
+
+ cmd_i2c: Fix help for CONFIG_I2C_CMD_TREE && !CONFIG_I2C_MULTI_BUS
+
+ Original code displayed:
+ => help i2c
+ i2c i2c speed [speed] - show or set I2C bus speed
+ i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device
+ ...
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a0b1b610e980e253d4c2519ee15bd0937c3f8be1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Oct 14 22:13:41 2008 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0f8cbc1829d9c7d9616fd29b366a99d037facdcd
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Oct 10 11:41:01 2008 +0800
+
+ Do not init SATA when disabled on 8536DS.
+
+ SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the
+ driver still try to access the SATA registers, the cpu will hangup.
+ This patch try to fix this by reading the serdes status before the SATA
+ initialize.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9dbc366744960013965fce8851035b6141f3b3ae
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Fri Oct 10 10:23:22 2008 +0200
+
+ The PIPE_INTERRUPT flag is used wrong
+
+ At a lot of places in the code the PIPE_INTERRUPT flags and friends
+ are used wrong. The wrong bits are compared to this flag resulting
+ in wrong conditions. Also there are macros that should be used for
+ PIPE_* flags.
+ This patch tries to fix them all, however, I was not able to test the
+ changes, because I do not have any of these boards.
+
+ Review required!
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 48867208444cb2a82e2af9c3249e90b7ed4a1751
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Fri Oct 10 10:23:21 2008 +0200
+
+ fix USB initialisation procedure
+
+ The max packet size is encoded as 0,1,2,3 for 8,16,32,64 bytes.
+ At some places directly 8,16,32,64 was used instead of the encoded
+ value. Made a enum for the options to make this more clear and to help
+ preventing similar errors in the future.
+
+ After fixing this bug it became clear that another bug existed where
+ the 'pipe' is and-ed with PIPE_* flags, where it should have been
+ 'usb_pipetype(pipe)', or even better usb_pipeint(pipe).
+
+ Also removed the triple 'get_device_descriptor' sequence, it has no use,
+ and Windows nor Linux behaves that way.
+ There is also a poll going on with a timeout when usb_control_msg() fails.
+ However, the poll is useless, because the flag will never be set on a error,
+ because there is no code that runs in a parallel that can set this flag.
+ Changed this to something more logical.
+
+ Tested on AT91SAM9261ek and compared the flow on the USB bus to what
+ Linux is doing. There is no difference anymore in the early initialisation
+ sequence.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit ec4d8c1c1d94a790c1473ae8aace282b817c3123
+Author: Nikita V. Youshchenko <yoush@cs.msu.su>
+Date: Fri Oct 3 00:03:55 2008 +0400
+
+ fsl_diu: fix alignment error that caused malloc corruption
+
+ When aligning malloc()ed screen_base, invalid offset was added.
+ This not only caused misaligned result (which did not cause hardware
+ misbehaviour), but - worse - caused screen_base + smem_len to
+ be out of malloc()ed space, which in turn caused breakage of
+ futher malloc()/free() operation.
+
+ This patch fixes screen_base alignment.
+
+ Also this patch makes memset() that cleans framebuffer to be executed
+ on first initialization of diu, not only on re-initialization. It looks
+ correct to clean the framebuffer instead of displaying random garbage;
+ I believe that was disabled only because that memset caused breakage
+ of malloc/free described above - which no longer happens with the fix
+ described above.
+
+ Signed-off-by: Nikita V. Youshchenko <yoush@debian.org>
+
+commit 3d0ea3110f3431b6c2aee882784f39f97b20bce9
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Sep 24 10:29:37 2008 +0200
+
+ api: Fix building with CONFIG_API
+
+ This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE.
+
+ USB_MAX_STOR_DEV is defined in include/usb.h, but
+ needed in api/api_storage.c.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit abbb90666d5ef2f500ebbedbb80ff60adc56b043
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Sep 23 12:39:40 2008 -0500
+
+ Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 81e612014c40c922ec35488d17c504d4e9286f06
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Sep 23 12:38:42 2008 -0500
+
+ Remove CFG_EEPROM_PAGE* dependencies for temperature sensors
+
+ The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and
+ CFG_EEPROM_PAGE_WRITE_BITS in various temperature
+ sensor drivers are not necessary
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit c46980f6d2135ade345dadc1fb1f1f4c8bbf255a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 07:04:38 2008 -0400
+
+ cmd_spi: remove broken signed casting for display
+
+ Since we're working with unsigned data, you can't apply a signed pointer
+ cast and then attempt to print the result. Otherwise you get wrong output
+ when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF".
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d5fd0b49210c941de8a1fce3947ace92243ab5ca
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 07:05:24 2008 -0400
+
+ strings cmd: drop old CONFIG_CFG_STRINGS define
+
+ We don't need CONFIG_CFG_STRINGS anymore now that we have the define
+ CONFIG_CMD_STRINGS and Makefile control.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fecb5ade3b37f62981f2b05b621005850173aaa9
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Sep 19 17:32:49 2008 +0800
+
+ Fix the NAND size overflow issue.
+
+ When the total size of all NAND devices exceeds 4 GiB, the size will
+ overflow. This patch tries to fix this.
+
+ Note that we still have a problem when a single NAND device is bigger
+ than 4 GiB: then the overflow would actually happen earlier, i. e.
+ when storing the size in nand_info[].size, as nand_info[].size is an
+ "u_int32_t".
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 30f574717277238b9014b8136c90eea77196490f
+Author: Louis Su <louis@asix.com.tw>
+Date: Wed Jul 9 11:01:37 2008 +0800
+
+ AX88180: new gigabit network driver
+
+ Signed-off-by: Louis Su <louis@asix.com.tw>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c9d6b6925344740ca1db2f8a6bab7921ff820de3
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Tue Aug 19 16:07:03 2008 +0200
+
+ enable 10/100M at VSC8601 at tsec driver
+
+ Currently VSC8601 doesn't link with 10/100M partners if the
+ EEPROM/Strapping is not set up.
+ Setting the auto-neg register fixes this.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 702c85b0e876d587c11acdbb55738ee52acd54f4
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Sep 30 15:02:53 2008 +0900
+
+ net: ne2000: Divided a function of NE2000 driver
+
+ get_prom function was used __attriute__ , but it is not enable.
+ ax88796.o does not do link besides ne2000.o. When ld is carried
+ out, get_prom function of ax88796.c is ignored.
+ This problem is a thing by specifications of ld.
+ I checked and test this patch on SuperH and MIPS.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 05c7e9070fe4d751e029fd9524bfbbc93cbb1393
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Oct 14 11:10:59 2008 +0900
+
+ sh: rsk7203: Add smc911x driver support to board config file
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit cae6f909baf86357b3c0bd01acfc414348c4d175
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Oct 9 13:54:33 2008 +0900
+
+ sh: Fix cannot execute a stand-alone application
+
+ Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6df0efd5c86ca1689deeb2738b46b7d83ce228ef
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Oct 8 23:38:00 2008 -0500
+
+ fsl_pci_init do not scan bus when configured as an end-point
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 6f099bbac1ba5dfb46ee7ad29dc53713f0501ba5
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Sep 16 17:07:53 2008 -0400
+
+ ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board.
+
+ This is no longer necessary now that the GD_FLG_RELOC flag is set for
+ all ARM boards.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit d977a57356657ba241256231efca32828a5822f9
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Sat Sep 13 10:04:32 2008 +0200
+
+ Fix lzma uncompress call (image_start wrongly used instead image_len)
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+
+commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Aug 28 14:09:15 2008 -0700
+
+ mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
+
+ This is needed in unlock_ram_in_cache() because it is called from C and
+ will corrupt the small data area anchor that is kept in R2.
+
+ lock_ram_in_cache() is modified similarly as good coding practice, but
+ is not called from C.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+
+commit 5c7cbcd34d0ee566875a4fd0f2a3e5a62bba921c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 19 15:05:34 2008 -0500
+
+ 86xx: remove redudant code with lib_ppc/interrupts.c
+
+ For some reason we duplicated the majority of code in lib_ppc/interrupts.c
+ Not know how that happened, but there is no good reason for it.
+
+ Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
+ they exist.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0d01f66d235118515b5086b88f82498bc0695d6a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Oct 9 01:26:36 2008 -0500
+
+ CFI: cfi_flash write fix for AMD legacy
+
+ The flash_unlock_seq requires a sector for AMD_LEGACY.
+ Fix a retcode check typeo.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 542b385a620a1783454a00424930e51895f45073
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:10 2008 +0200
+
+ ppc4xx: Fix USB 2.0 phy reset sequence
+
+ This patch fixes USB 2.0 communication issues on some DU440 boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit df8c1ce11114c2260dedb5547281945f7db8fa5c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:09 2008 +0200
+
+ ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6a133d6a00b1fc7b9257cd5925d8cb67f75ecda2
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:08 2008 +0200
+
+ ppc4xx: Fix DU440 GPIO configuration
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 35dd025c70fcc4389317db2f2a9d14795172137d
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:07 2008 +0200
+
+ ppc4xx: Update DU440 config
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f3bf9273939ffe1a60a32a2eef909097f15df56b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 8 15:36:39 2008 -0500
+
+ MPC8572DS: Fix compile warnings
+
+ Commit 445a7b38308eb05b41de74165b20855db58c7ee5 introduced the following
+ compile warnings:
+
+ cmd_i2c.c:112: warning: missing braces around initializer
+ cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]')
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit dffd2446fb041f38ef034b0fcf41e51e5e489159
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Tue Sep 30 10:55:57 2008 +0200
+
+ 85xx: Using proper I2C source clock divider for MPC8544
+
+ Measurements with our MPC8544 board showed that the I2C bus frequency
+ is wrong by a factor of 1.5. Obviously, the interpretation of the
+ MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not
+ correct. There seems to be an error in the 8544 RM.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit e46c7bfb8bc3c304cedd20f7a365d6e78d7eaf17
+Author: Rafal Czubak <rcz@semihalf.com>
+Date: Wed Oct 8 13:41:30 2008 +0200
+
+ FSL: Fix get_cpu_board_revision() return value.
+
+ get_cpu_board_revision() returned board revision based on information stored
+ in global static struct eeprom. It should instead use one from local struct
+ board_eeprom, to which the data is actually read from EEPROM. The bug led to
+ system hang after printing L1 cache information on U-Boot startup. The problem
+ was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx
+ boards using CFG_I2C_EEPROM_CCID.
+
+ The change has been successfully tested on MPC8555CDS system.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+
+commit 747f316cca484ed627a97dd3391febabce384186
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 30 20:08:49 2008 +0200
+
+ update uImage FIT multi documentation
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 77a0355f60b801f232ce0a5bfbe95331fa3b6bc0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 30 20:08:36 2008 +0200
+
+ move README.imx31 to doc/ and merge with README.mx31
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1ed7a7f0f571b13d46530f8f8b9aff3957f15a96
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Sep 25 20:54:37 2008 +0200
+
+ i.MX31: switch to CFG_HZ=1000
+
+ Switch to the standard CFG_HZ=1000 value, while at it, minor white-space
+ cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads,
+ provides 2% or 0.4% precision depending on the
+ CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s
+ boot-delay.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit f41b144c11341b571eab7dcef6c4b8e03c92d2b2
+Author: gnusercn <gnusercn@gmail.com>
+Date: Wed Oct 8 18:58:58 2008 +0200
+
+ Fix bug: in arch-arm, env_get_char dose not work fine
+
+ due to the arm implementation which supposed that U-Boot is in RAM
+ when we jump to start_armboot
+
+ Signed-off-by: gnusercn <gnusercn@gmail.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f8a00dea841d5d75de1f8e8107e90ee1beeddf5f
+Author: Adam Graham <agraham@amcc.com>
+Date: Mon Oct 6 10:16:13 2008 -0700
+
+ ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change
+
+ After changing SDRAM_CLKTR phase value rerun the memory preload
+ initialization sequence (INITPLR) to reset and relock the memory
+ DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing
+ adjustment effects the phase relationship of the internal, to the
+ PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT.
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5297246bbaa9943c0da1ec2e717b72e4ab6b830e
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 11:48:03 2008 -0400
+
+ Remove redundant #define for MPC8536DS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 445a7b38308eb05b41de74165b20855db58c7ee5
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 11:47:30 2008 -0400
+
+ Add ID EEPROM support for MPC8572DS
+
+ The ID EEPROM on MPC8572DS board locates on I2C bus 1. Its the storage for
+ system information like mac addresses etc. This patch enables it.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 1f3ba317a5c5f3a7aabf580fddc211f4bb5a4540
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 11:46:59 2008 -0400
+
+ Minor fixes for I2C address on MPC8572DS
+
+ MPC8572DS has two i2c buses. This patch moves the DDR SPD_EEPROM to i2c bus 1
+ according to the board spec, and adds the 2nd i2c bus offset.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit c0391111c33c22fabeddf8f4ca801ec7645b4f5c
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Sat Sep 27 14:40:57 2008 +0800
+
+ Fix the incorrect DDR clk freq reporting on 8536DS
+
+ On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111),
+ The display is still sync mode DDR freq. This patch try to fix
+ this. The display DDR freq is now the actual freq in both
+ sync and async mode.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit bac6a1d1fa1cd80aa57881fa9c2152b853cd0ed4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 7 10:28:46 2008 -0500
+
+ 85xx: Remove setting of *cache-line-size in device trees
+
+ ePAPR says if the *cache-block-size is the same as *cache-line-size
+ than we don't need the *cache-line-size property.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit cd3cb0d9269d155276b00207e3816a9347fd1c92
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Oct 4 07:56:06 2008 -0400
+
+ libfdt: Fix error in documentation for fdt_get_alias_namelen()
+
+ Oops, screwed up the function name in the documenting comment for this
+ function. Trivial correction in this patch.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9a6cf73a88ddab2e1ac39088f2806177982cc62c
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Wed Aug 20 16:55:14 2008 +1000
+
+ libfdt: Add function to explicitly expand aliases
+
+ Kumar has already added alias expansion to fdt_path_offset().
+ However, in some circumstances it may be convenient for the user of
+ libfdt to explicitly get the string expansion of an alias. This patch
+ adds a function to do this, fdt_get_alias(), and uses it to implement
+ fdt_path_offset().
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 2215987e100d2a841ae6d48a7cc9bb83fcf22737
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Oct 2 01:55:38 2008 -0400
+
+ cfi_flash: do not reset flash when probe fails
+
+ The CFI flash driver starts at flash_init() which calls down into
+ flash_get_size(). This starts by calling flash_detect_cfi(). If said
+ function fails, flash_get_size() finishes by attempting to reset the
+ flash. Unfortunately, it does this with an info->portwidth set to 0x10
+ which filters down into flash_make_cmd() and that happily smashes the
+ stack by sticking info->portwidth bytes into a cfiword_t variable that
+ lives on the stack. On a 64bit system you probably won't notice, but
+ killing the last 8 bytes on a 32bit system usually leads to a corrupt
+ return address. Which is what happens on a Blackfin system.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3e38577208e4256956bc33bb8bcd0a6b6fab55c3
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Sep 26 17:03:26 2008 +0200
+
+ fdt: Overwrite /chosen node in bootm if it already exists in the dtb
+
+ Set force parameter in fdt_chosen() call in do_bootm_linux() call.
+ Without this, the chosen node is not overwritten if it already
+ exists.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 741a6d010d09b5bafca8e4cdfb6b2f8a2c07994d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Sep 25 11:02:17 2008 -0500
+
+ Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3.
+
+ Using Gcc 4.3 detected this problem:
+
+ ../dtc/libfdt/fdt.c: In function 'fdt_next_tag':
+ ../dtc/libfdt/fdt.c:82: error: assuming signed overflow does not
+ occur when assuming that (X + c) < X is always false
+
+ To fix the problem, treat the offset as an unsigned int.
+
+ The problem report and proposed fix were provided
+ by Steve Papacharalambous <stevep@freescale.com>.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit bbdbc7cb3abefda5bd998edbcf0508fe6256327d
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Fri Aug 29 14:19:13 2008 +1000
+
+ libfdt: Fix bugs in fdt_get_path()
+
+ The current implementation of fdt_get_path() has a couple of bugs,
+ fixed by this patch.
+
+ First, contrary to its documentation, on success it returns the length
+ of the node's path, rather than 0. The testcase is correspondingly
+ wrong, and the patch fixes this as well.
+
+ Second, in some circumstances, it will return -FDT_ERR_BADOFFSET
+ instead of -FDT_ERR_NOSPACE when given insufficient buffer space.
+ Specifically this happens when there is insufficient space even to
+ hold the path's second last component. This behaviour is corrected,
+ and the testcase updated to check it.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 33af3e6656e84660d397b5dd95abab2dccc36f83
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Oct 1 12:34:58 2008 +0200
+
+ TQM5200: enable support for ATAPI devices
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d13ff2358ff8c384f52eaf46f5d60258acf96ea6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 15 05:48:25 2008 +0200
+
+ Revert "ARM: set GD_FLG_RELOC for boards skipping relocation to RAM"
+
+ we need this due to the arm implementation which supposed that U-Boot
+ is in RAM when we jump to start_armboot
+
+ This reverts commit f96b44cef897bd372beb86dde1b33637c119d84d.
+ in order to do it for all arm board
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7fd0bea2e4a78eab7e6693140940f9f9a0009bc2
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Sep 24 08:46:25 2008 -0500
+
+ mpc83xx: don't disable autoboot
+
+ bootdelay set to -1 'permanently' disables autobooting, even if
+ bootcmd is specified. Change to a positive value to allow
+ autobooting when a bootcmd is set.
+
+ Reported-by: Coray Tate <Coray.Tate@freescale.com>
+ Cc: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2fb29c520c42b7bfef33ea3fd1527eba64099164
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Wed Sep 24 10:42:15 2008 +0900
+
+ mpc83xx: Fix typo in include/mpc83xx.h
+
+ Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 162c41c03179727a1d14262f703c9a8bc40231fa
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Sep 23 09:38:49 2008 -0500
+
+ mpc83xx: add h/w flash protection to board configs
+
+ the operating system may leave flash in a h/w locked state after writing.
+ This allows u-boot to continue to write flash by enabling h/w unlocking
+ by default.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d26154c9a692586b66eb6d1f8e1b67c75e40ea70
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Sep 11 21:35:36 2008 +0400
+
+ mpc83xx: spd_sdram: fix ddr sdram base address assignment bug
+
+ The spd_dram code shifts the base address, then masks 20 bits, but
+ forgets to shift the base address back. Fix this by just masking the
+ base address correctly.
+
+ Found this bug while trying to relocate a DDR memory at the base != 0.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8fd4166c467a46773f80208bda1ec3b4757747bc
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 22 16:10:43 2008 +0200
+
+ ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup
+
+ Depending on the configuration jumper "SATA SELECT", U-Boot disabled
+ either one PCIe node or the SATA node in the device tree blob. This
+ patch removes the unnecessary and even confusing warning, when the node
+ is not found at all.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6e24a1eb1490aa043770bcf0061ac1fad0864fd9
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Fri Sep 19 13:30:06 2008 +0200
+
+ Add missing device types to dev_print() in part.c
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 5fdc215f0b351b0c36cc3f8a0fa5850f24454bed
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 22 22:23:06 2008 +0200
+
+ Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which
+ eventually leads to a machine check. This change assures that DPRAM
+ is allocated only once in that case.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a07faf7b9ad5a86763a577c79922c4ff9a70ef23
+Author: Laurent Pinchart <laurentp@cse-semaphore.com>
+Date: Wed Sep 17 17:57:34 2008 +0200
+
+ Fix Spartan-3 definitions.
+
+ A few Spartan-3 definitions erroneously use Spartan-3E size
+ constants. This patch fixes them.
+
+ Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
+
+commit 28113e1f0da4146b823ffce37680d31d5685a60b
+Author: Laurent Pinchart <laurentp@cse-semaphore.com>
+Date: Wed Sep 17 17:41:58 2008 +0200
+
+ Remove duplicate Spartan-3E definition.
+
+ Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5c65ecf7cd94df250b295621f3b24135cbcfe579
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Sep 17 13:46:17 2008 +0200
+
+ socrates: change default mtest address range
+
+ Running mtest command on socrates without specifying
+ an address range crashes the board. This patch changes
+ default mtest address range to prevent this behavior.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit d666b2d59674b5e002c0821b7ab83ec3ff90d670
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Sep 17 12:34:45 2008 +0200
+
+ socrates: fix crash after relocation
+
+ Currently U-Boot crashes after relocation to RAM.
+ Changing the CPO value of the DDR SDRAM TIMING_CFG_2
+ register to READ_LAT + 1 (to the value it was before
+ conversion of socrates to new DDR code) fixes the
+ problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 562788b0a303f3528b920d81f547f5ca77ba528e
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Sep 17 11:45:51 2008 +0200
+
+ socrates: fix SPD EEPROM address
+
+ Commit be0bd8234b9777ecd63c4c686f72af070d886517
+ changed SPD EEPROM address to 0x51 and DDR SDRAM
+ detection stopped working. Change this address
+ back to 0x50.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 023824549a370bd185d7129d9a6c86f9be7b86a8
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 22 11:06:50 2008 +0200
+
+ Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)"
+
+ This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e58c41e26cf3c8accd60311be579f452e368e97e
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Sep 18 20:13:08 2008 +0900
+
+ usb: Fix compile warning of r8a66597-hcd
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit b5d10a13525c07ec6374adf840d7c87553b5f189
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Sep 18 19:34:36 2008 +0900
+
+ sh: Fix compile warning
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 4a065abf926f128beb36d93449defa0d690e7fef
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Sep 18 19:04:26 2008 +0900
+
+ sh: Add support watchdog for SH4A core
+
+ Add support watchdog for SH4A core (SH7763, SH7780 and SH7785).
+ And fix some compile warning.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit a03c09c5fdb8430fe2ae6a03f88a0cf7bcc0aa57
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Sep 17 11:45:26 2008 +0900
+
+ sh: Fix typo in SH serial driver
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6b44a439215ba7c63f666f8099213ea4f05f2b07
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Sep 17 11:08:36 2008 +0900
+
+ sh: Add support any page size and empty_zero_page to SH Linux uImage
+
+ Old U-Boot supported 4KB page size only. If this version, Linux
+ kernel can not get command line from U-Boot.
+ SH Linux kernel can change page size and empty_zero_page.
+ This patch support this function and fix promlem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ce9f99ddb59628f41dc534e892368a7d66dfc774
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 13:40:52 2008 +0900
+
+ sh: rsk7203: Add support pkt_data_pull and pkt_data_push function
+
+ Add function of smc911x, pkt_data_pull and pkt_data_push.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit dd820b03a2f45e86e7960e26729a3b58e3dda44a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Sep 18 13:57:32 2008 +0200
+
+ ADS5121: fix typo in "rootpath" default setting
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c9e8436b10cca53fca4904ecbadcd6231ad72c38
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Sep 16 14:55:44 2008 +0200
+
+ USB layer of U-Boot causes USB protocol errors while using USB memory sticks
+
+ There are several differences between Linux, Windows and U-boot for initialising the
+ USB devices. While analysing the behaviour of U-boot it turned out that U-boot does
+ things really different, and some are wrong (compared to the USB standard).
+
+ This patch fixes some errors:
+ * The NEW_init procedure that was already in the code is good, while the old procedure
+ is wrong. See code comments for more info.
+ * On a Control request the data returned by the device can be more than 8 bytes, while
+ the host limits it to 8 bytes. This caused the host to generate a DataOverrun error.
+ This results in a lot of USB sticks not being recognised, and the transmission ended
+ frequently with a CTL:TIMEOUT Error.
+ * Added a flag CONFIG_LEGACY_USB_INIT_SEQ to allow users to use the old init procedure.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 6f5794a6f78b313231256958fd73673c6aacc116
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Sep 16 14:55:43 2008 +0200
+
+ Refactoring parts of the common USB OHCI code
+
+ This patch refactors some large routines of the USB OHCI code by
+ making some routines smaller and more readable which helps
+ debugging and understanding the code. (Makes the code looks
+ somewhat more like the Linux implementation.)
+
+ Also made entire file compliant to Linux Coding Rules (checkpatch.pl compliant)
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit be19d324edc1a1d7f393d24e10d164cd94c91a00
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Sep 16 14:55:42 2008 +0200
+
+ Fix for USB sticks not working on ARM while using GCC 4.x compilers
+
+ The GCC-compiler makes an optimisation error while optimising the routine
+ usb_set_maxpacket(). This should be fixed in the compiler in the first place,
+ but there lots of compilers out there that makes this error, that it is
+ probably wiser to workaround it in U-boot itself.
+
+ What happens is that the register r3 is used as loop-counter 'i', but gets
+ overwritten later on. From there it starts using register r3 for several other
+ things and the assembler code is becoming a big mess. This is clearly a compiler bug.
+
+ This error occurs on at least several versions of Code Sourcery Lite compilers
+ for ARM. Like the Edition 2008q1, and 2008q3, It has also been seen on other
+ compilers, while compiling for armv4t, or armv5te with Os, O1 and O2.
+
+ We work around it by splitting up this routine in 2 parts, and making sure that
+ the split out part is NOT inlined any longer. This will make GCC spit out assembler
+ that do not show this problem. Another possibility is to adapt the Makefile to stop
+ optimisation for the complete file. I think this solution is nicer.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Sep 17 10:17:55 2008 +0200
+
+ Coding style cleanup; update CHANEGLOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date: Tue Sep 16 06:59:13 2008 -0700
+
+ ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)
+
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ce47eb402c5e29a025399dc282246414fc492940
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Sep 16 10:04:47 2008 -0500
+
+ Support for multiple SGMII/TBI interfaces for TSEC ethernet
+
+ Fix TBI PHY accesses to use the proper offset in CPU register space. The
+ previous code would incorrectly access the TBI PHY by reading/writing to CPU
+ register space at the same location as would be used to access external PHYs.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 7c803be2eb3cae245dedda438776e08fb122250f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 16 18:02:19 2008 +0200
+
+ TQM8xx: Fix CFI flash driver support for all TQM8xx based boards
+
+ After switching to using the CFI flash driver, the correct remapping
+ of the flash banks was forgotten.
+
+ Also, some boards were not adapted, and the old legacy flash driver
+ was not removed yet.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c0d2f87d6c450128b88e73eea715fa3654f65b6c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Sep 14 00:59:35 2008 +0200
+
+ Prepare v2008.10-rc2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f12e4549b6fb01cd2654348af95a3c7a6ac161e7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Sep 13 02:23:05 2008 +0200
+
+ Coding style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0c32565f536609d78feef35c88bbc39d3ac53a73
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Sep 10 09:18:34 2008 -0500
+
+ Update mailing list email and archive addresses
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fb661ea444ae61de60520f66ae84cdb5dd5a3246
+Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
+Date: Thu Sep 11 15:40:01 2008 +0200
+
+ 85xx: socrates: autoprobe Lime chip
+
+ This patch is an attempt to implement autoprobing for the Lime
+ presence on the bus.
+ Configure GPCM for Lime CS2 and try to access chip ID registers.
+ Second read atempt delivers register values if the chip is present.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit e99b607a5ec56ce66e0bcccb78480d5e16fb7bc5
+Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
+Date: Thu Sep 11 15:40:01 2008 +0200
+
+ 85xx: socrates: Add support for new image format.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 3c094b652d4107b34641f300a8e9fe16ca15e3d8
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Sep 11 17:28:18 2008 +0900
+
+ sh: Fix compile error for r2dplus
+
+ netdev.h was not include by r2dplus.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+
+commit 56844a22b76c719e600047e23b80465a44d76abd
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Sep 11 08:11:23 2008 +0200
+
+ powerpc: Fix bootm to boot up again with a Ramdisk
+
+ Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
+ and this stopped Linux from booting with a Ramdisk. This patch fixes
+ this, by deleting the useless dummy mem reservation.
+
+ When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
+ added to of_size, so we dont need anymore a dummy mem reservation.
+
+ I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
+ system (=0x44 bytes) and rounded it up to 0x80).
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fc9c1727b5b3483ce49c3cb668e8332fb001b8a7
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Mon Sep 8 02:46:13 2008 +0200
+
+ Add support for LZMA uncompression algorithm.
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0008b6d968160abe2bfd936493f3a516a7c8da20
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Jun 27 23:04:20 2008 +0400
+
+ fsl_elbc_nand: ecclayout cleanups
+
+ This patch deletes oobavail assignments, they're calculated by the nand
+ core code in nand_scan_tail, plus current oobavail values are wrong for
+ the LP NANDs.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 8f42bf1c393d53a70c2545e9f329d11c46d74794
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Jun 27 23:04:13 2008 +0400
+
+ fsl_elbc_nand: implement support for flash-based BBT
+
+ This patch implements support for flash-based BBT for chips working
+ through ELBC NAND controller, so that NAND core will not have to re-scan
+ for bad blocks on every boot.
+
+ Because ELBC controller may provide HW-generated ECCs we should adjust
+ bbt pattern and bbt version positions in the OOB free area.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 97ae023648e764f794ffb9c52da109d6caf09c47
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Jun 27 23:04:04 2008 +0400
+
+ fsl_elbc_nand: fix OOB workability for large page NAND chips
+
+ For large page chips, nand_bbt is looking into OOB area, and checking
+ for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
+ reserved for bbt means.
+
+ But ELBC driver is specifying ecclayout so that oobfree area starts at
+ offset 1, so only one byte left for the bbt purposes.
+
+ This causes problems with any OOB users, namely JFFS2: after first mount
+ JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:
+
+ OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
+ OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+ OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+ OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+
+ And on the next boot, NAND core will rescan for bad blocks, then will
+ see "0xff 0x19" pattern, and will mark all blocks as bad ones.
+
+ To fix the issue we should implement our own bad block pattern: just one
+ byte at OOB start. Though, this will work only for x8 chips. For x16
+ chips two bytes must be checked. Since ELBC driver does not support x16
+ NANDs (yet), we're safe for now.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 7238ada313057a85409485b8ee21515dc10c07a5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 12 13:52:21 2008 +0200
+
+ MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b18410e508a12ba0a177dfc2a386857c806fa96d
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Sep 11 13:05:56 2008 +0200
+
+ ppc4xx: Enable device tree (FDT) support in zeus board port
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7bf5ecfa50722a9feb45ea8f04da75f5d406f20b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Sep 10 16:53:47 2008 +0200
+
+ ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports
+
+ This patch fixes a problem introdiced with patch
+ bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by
+ initdram()].
+
+ The boards affected are:
+ - PCI405
+ - PPChameleonEVB
+ - quad100hd
+ - taihu
+ - zeus
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 61737c59a3285f6fadf96a5836879898c04ec28d
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Thu Sep 11 19:41:26 2008 -0400
+
+ ppc4xx: Add .gitignore file to xilinx-ppc440 boards
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2bec498ed1164a58cd8437b561bdc4551d69f9bf
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Thu Sep 11 19:41:25 2008 -0400
+
+ ppc4xx: Fix compilation of v5fx30teval_flash
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4bed9deebbd7ee6f0ba746b44d47a922156f7404
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Sep 10 17:44:30 2008 -0400
+
+ ppc4xx: Fix in-tree build for ppc440-generic boards
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 06c4ab50f5ccfb55ea2dd324aa28b2b06102e416
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Sep 12 02:20:47 2008 +0200
+
+ ARM: synchronize mach-types.h with linux 2.6.27-rc6
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3ee9f03f588ad605e3fd10530237f9e3e2e7ab4c
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Fri Sep 12 02:20:47 2008 +0200
+
+ at91rm9200: fix errors with CONFIG_CMD_I2C_TREE
+
+ This patch prevents linker error on AT91RM9200 boards, if
+ CONFIG_CMD_I2_TREE is set.
+ It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function.
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+
+commit b5b0344957d32e3d07a8dd72fce64fb48e680ba4
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Sep 12 02:20:47 2008 +0200
+
+ ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
+
+ ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 03db53335c8eba656a7c44d1555b1a4514383e33
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ make: Remove redundant __ARM__ addition when cross-compiling on *BSD
+
+ __ARM__ is given by arm_config.mk automatically.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 8cc62a7d9c77f8ef5166fb57322c4a6ddac320b4
+Author: Claudio Scordino <claudio@evidence.eu.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ Fix MACH_TYPE for the AT91RM9200DK board.
+
+ Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
+
+commit 274737e5eb25b2bcd3af3a96da923effd543284f
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ i.mx change get_timer(base) to return time since base
+
+ This patch changes get_timer() for i.MX to return the time since
+ 'base' instead of the time since the counter was at zero.
+
+ Symptom seen is flash timeout errors when erasing or programming a
+ sector using the common cfi flash code.
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit 48fed40575b3e8eae960eb0141509ddd9a73012a
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ i.MX use u-boot baud rate and don't assume UART master clock
+
+ 1) Change the i.MX serial driver to use the baud rate set in the
+ u-boot environment
+
+ 2) don't assume a 16MHz value for PERCLK1 in baud rate calculations
+
+ 3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write
+ one to clear" like other status bits in the reg.)
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit 6e1551a870d360805b9d172dc56d935064abe71d
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ arm920t fix constant error in start.S
+
+ Code in cpu/arm920t/start.S will die with a compilation error if
+ CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
+ the ARM sub instruction. Change the code so that each is subtracted
+ independently to avoid the error.
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit b23253835f871cd9bd8e955b9a971d18a7d4ff56
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Fri Sep 12 02:20:40 2008 +0200
+
+ ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
+
+ - Correct Invalid #define of MPUTIM_PTV_MASK for
+ omap1510 & omap730 register definition
+
+ MPUTIM_PTV_MASK is defined as
+ #define MPUTIM_PTV_MASK (0x7<<PTV_BIT)
+
+ while it should have been
+ #define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
+
+ - Below Patch corrects the same
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit c455d07396dddc9864fd8dbb965ee10fe95ce8cf
+Author: Adrian Filipi <adrian.filipi@eurotech.com>
+Date: Fri Jul 18 11:52:02 2008 -0400
+
+ Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.
+
+ Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
+
+commit eb16135df20535b0d19969f50fb5bd17f95e9c25
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Aug 28 12:25:11 2008 +0200
+
+ i.MX31: document timer precision option
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 1a6337b01351b82a45b0defa76f08744511c580b
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Fri Aug 29 10:36:18 2008 +0200
+
+ i.MX31: Make the SPI bus and chip select configurable for MC13783
+
+ The i.MX31 has three SPI buses and each bus has several chip selects
+ and the MC13783 chip can be connected to any of these. The current
+ RTC driver for MC13783 is hardcoded for CSPI2/SS2.
+
+ This patch makes make MC13783 SPI bus and chip select configurable
+ via CONFIG_MC13783_SPI_BUS and CONFIG_MC13783_SPI_CS.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 8c4ebec25b21e355b8488698ec1594da9701fff4
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Fri Aug 29 10:36:17 2008 +0200
+
+ i.MX31: Add reset_timer() and modify get_timer_masked().
+
+ This patch adds the reset_timer() function (needed by nand_base.c) and
+ modifies the get_timer_masked() to work in the same way as the omap24xx
+ function.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit deeec4991a55de243787002ede24d2331d234fc8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:09 2008 +0200
+
+ ap325rxa: remove duplicate CONFIG_FLASH_CFI_DRIVER
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a3a08c0cedd329edf5256e1d6b2bad0fca002725
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:09 2008 +0200
+
+ bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0e8d158664a913392cb01fb11a948d83f72e105e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:06 2008 +0200
+
+ rename CFG_ENV macros to CONFIG_ENV
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1ede78710c3bf9ad6f4a53aaddc3bcc86fedd9df
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:05 2008 +0200
+
+ nvedit: rename error comment to CONFIG_ENV_IS_IN_
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b64b775e7546ed138df360ceb3a71ee358cb9a01
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:05 2008 +0200
+
+ cmd_mem: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8a40fb148efa442d6526eac46a2001e4c64d28ff
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:05 2008 +0200
+
+ move cmd_get_data_size to command.c
+
+ add CMD_DATA_SIZE macro to enable it
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 507641d2491980531932b9f25dab37fe5e6c3a1a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:04 2008 +0200
+
+ env_flash: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5a1aceb0689e2f731491838970884a673ef7e7d3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:04 2008 +0200
+
+ rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7d9b5bae5ba558c7464d89d033aca04acaf01172
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:03 2008 +0200
+
+ cleanup use of CFG_ENV_IS_IN_FLASH
+
+ - #if CFG_ENV_IS_IN_FLASH
+ - #if (CFG_ENV_IS_IN_FLASH == 1)
+ - #define CFG_ENV_IS_IN_FLASH 0
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0cf4fd3cf8d0e00605bec5fc56f89c6415015a46
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:01 2008 +0200
+
+ rename environment.c in env_embedded.c to reflect is functionality
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c0878af6e32f0fd8e13a6ca315b9add64441115a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:01 2008 +0200
+
+ env_nowhere: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 93f6d72544da4510a146bc4c93d609b0116cde37
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2556ef78113b5f089dfcac5da90bf31dd568397b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ env_sf: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0b5099a8419bf9c828df5e3e2c6878dc300d98e3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ rename CFG_ENV_IS_IN_SPI_FLASH in CONFIG_ENV_IS_IN_SPI_FLASH
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 55c5f49910ec8225347aa1d211352a84de6649b4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ env_onenand: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9656138ff1a34d4c4768db6b490deffc40ee674b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ rename CFG_ENV_IS_IN_ONENAND in CONFIG_ENV_IS_IN_ONENAND
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 957a0e69575683efd70ace147746bbb3d8e7c501
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ env_nvram: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9314cee6917444ab88bd4e758da7a30975120187
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 06f61354397911a4c121dfa51b6ccbf7e300d48b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ env_nand: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 51bfee192099206a4397f15f3b93516e01f58ab0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:58 2008 +0200
+
+ rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d8cc04d0ac9c7c0d12454708aaf5489f8532bbf9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:58 2008 +0200
+
+ env_dataflash: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 057c849c45b9ee19df8ff3acdeee66be52819962
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:58 2008 +0200
+
+ rename CFG_ENV_IS_IN_DATAFLASH in CONFIG_ENV_IS_IN_DATAFLASH
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d1034bc8db60fa6bd419328baf6a75cb0645cee8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:52 2008 +0200
+
+ cmd_eeprom: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bf5a7710ec70e90e98f451b4ba0eb65f9ffc34eb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Sep 5 09:19:54 2008 +0200
+
+ env_eeprom: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bb1f8b4f8bb0bfce52e0faa4637b975b745824b3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Sep 5 09:19:30 2008 +0200
+
+ rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 32628c5008105a732212003d83b75f05e5243bb2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:54:58 2008 +0200
+
+ cmd_mac: Move conditional compilation to Makefile
+
+ finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
+ start in commit ad8f8687b78c3e917b173f038926695383c55555
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e5648acab153f0f429bfc714902c5aaa7879f71b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:47:41 2008 +0200
+
+ cmd_fdc: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2d02d91d530e831f2dab228085963fc1d5b71cb0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:47:38 2008 +0200
+
+ common/Makefile: add core command section
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0d92d4a699fb1a39381d98571dc51fb97e5bcf9e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:29:57 2008 +0200
+
+ cmd_vfd: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6644641d072aee3087da129d8443187196a4d8a9
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Sep 10 11:48:49 2008 -0500
+
+ delta, zylonite: Update nand_oobinfo to nand_ecclayout.
+
+ This is part of the switch to newer upstream MTD code.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 9b05aa788bfdd3264ff1bc9418cb19550a7234e4
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Sat Aug 30 17:06:55 2008 -0400
+
+ ARM DaVinci: Fix broken HW ECC for large page NAND.
+
+ Based on original patch by Bernard Blackham <bernard@largestprime.net>
+
+ U-boot's HW ECC support for large page NAND on Davinci is completely
+ broken. Some kernels, such as the 2.6.10 one supported by
+ MontaVista for DaVinci, rely upon this broken behaviour as they
+ share the same code for ECCs. In the existing scheme, error
+ detection *might* work on large page, but error correction
+ definitely does not. Small page ECC correction works, but the
+ format is not compatible with the mainline git kernel.
+
+ This patch adds ECC code that matches what is currently in the
+ Davinci git repository (since NAND support was added in 2.6.24).
+ This makes the ECC and OOB layout written by u-boot compatible with
+ Linux for both small page and large page devices and fixes ECC
+ correction for large page devices.
+
+ The old behaviour can be restored by defining the macro
+ CFG_DAVINCI_BROKEN_ECC, which is undefined by default.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Acked-by: Sergey Kubushyn <ksi@koi8.net>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Sep 10 11:15:28 2008 +0200
+
+ muas3001: update BR4 settings
+
+ Also set up the port pins for using I2C.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3591293509e0c0bcf244b0f974775bff2e25697e
+Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
+Date: Wed Sep 10 09:43:49 2008 +0300
+
+ autoscr: Fix one-character lines and non-newline terminated scripts
+
+ When not using hush, the autoscr command now executes lines that are
+ only one character long. It also runs the last line of scripts even if
+ it does not end in a newline.
+
+ Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
+
+commit 9ebbb54f7a25055010fa6668eba40c72a4c4f985
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date: Tue Sep 9 15:13:29 2008 -0700
+
+ ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
+
+ On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
+ and glacier.
+
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+
+commit 245f6ef3e11828cb46188e396fb1e67f7b07cd03
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Sep 8 10:21:11 2008 +0200
+
+ muas3001: added support for the LM75 sensor.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 4a02a2dca82aeab8f839db9dd35fda9d5412dacb
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Sep 8 10:20:19 2008 +0200
+
+ muas3001: activate WDT for the muas3001 board.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit a55d074dac24dc941f1afb5b4e94b1509bfdda4e
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Sep 8 10:19:36 2008 +0200
+
+ muas3001: added 64MB SDRAM autodetection.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 5251469943895de4bb9a04d5053352cc22acb7d5
+Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+Date: Thu Aug 21 07:12:26 2008 -0700
+
+ Fix printf errors under -DDEBUG
+
+ Fix printf format-string/arg mismatches under -DDEBUG.
+
+ These warnings occur with DEBUG defined for a platform using
+ cpu/mpc85xx. Users of other architectures can unearth similar
+ problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right
+ after "CFLAGS += $(call cc-option,-fno-stack-protector)".
+
+ Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 8b9e4787641719d709bfa2ebeb72e8bd4952bee7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 23:55:18 2008 +0200
+
+ Update CHANGELOG, prepare 2008-10-rc1 release
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e0ff3d350d6b7960deb5a881dfc5acf3a63ef676
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Sep 8 08:51:29 2008 -0500
+
+ 85xx: Ensure timebase is zero on secondary cores
+
+ The e500um says the timebase is volatile out of reset. To ensure
+ TB sync works we need to make sure its zero.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 54b4ab3c961a2012a1c2a09c259a6343323ec551
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 9 22:18:24 2008 +0200
+
+ bootm_load_os: fix load_end debug message
+
+ print load_end value not pointer
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1d9af0be764960e6cc1c093e97176c3542796820
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 9 22:18:23 2008 +0200
+
+ bootm: enable fdt support only on ppc, m68k and sparc
+
+ ...as done in image.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 748b5274e76f81df85cfcffaffedc323678d0623
+Author: Markus Heidelberg <markus.heidelberg@web.de>
+Date: Tue Sep 9 18:51:05 2008 +0200
+
+ common/cmd_mem.c: remove nested #if defined(CONFIG_CMD_MEMORY)
+
+ Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
+
+commit 650632fe4ca09cfd0e5e6a593f2efc02ef87a58c
+Author: Markus Heidelberg <markus.heidelberg@web.de>
+Date: Tue Sep 9 17:31:46 2008 +0200
+
+ gitignore: add tags files and Vim swap file
+
+ Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
+
+commit 1d9b67b23fca6a25154333733204339802510720
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Tue Sep 9 17:52:47 2008 +0900
+
+ add board_eth_init() for sh7785lcr board
+
+ Fix the problem that cannot work RTL8169 on sh7785lcr board.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+
+commit 7b7a869a8ba3bd6d9bffb748c91232141330f514
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 6 16:08:41 2008 -0500
+
+ mtd: SPI Flash: Support the STMicro Flash
+
+ Add MTD SPI Flash support for M25P16, M25P20, M25P32,
+ M25P40, M25P64, M25P80, M25P128.
+
+ Signed-off-by: Jason McMullan <mcmullan@netapp.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 4bc07c368076560ed7fa4c9f987c71a8521488a9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 17:55:31 2008 +0200
+
+ trab: fix build problem after change to use do_div()
+
+ We must link with libgeneric now.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3b20fd83c73c22acfcb0c6663be747bd5c8b7011
+Author: Ryan CHEN <ryan.chen@st.com>
+Date: Wed Aug 20 13:00:17 2008 -0400
+
+ Correct drv_usb_kbd_init function
+
+ The patch is that check if usb_get_dev_index() function return valid
+ pointer. If valid, continue. Otherwise return -1.
+
+ Signed-off-by: Ryan Chen <ryan.chen@st.com>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit eba1f2fc75f128a9a6c1328d786996a93fd7a707
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Aug 20 11:22:02 2008 +0200
+
+ Make usb-stop() safe to call multiple times in a row.
+
+ A recent commit (936897d4d1365452bbbdf8430db5e7769ef08d38)
+ enabled the usb_stop() command in common/cmd_bootm.c which was
+ not enabled for some time, because no board did actually set the
+ CFG_CMD_USB flag. So, now the usb_stop() is executed before
+ loading the linux kernel.
+
+ However, the usb_ohci driver hangs up (at least on AT91SAM) if the
+ driver is stopped twice (e.g. the peripheral clock is stopped on AT91).
+ If some other piece of code calls usb_stop() before the bootm command,
+ this command will hangup the system during boot.
+ (usb start and stop is typically used while booting from usb memory stick)
+
+ But, stopping the usb stack twice is useless anyway, and a flag already
+ existed that kept track on the usb_init()/usb_stop() calls.
+ So, we now check if the usb stack is really started before we stop it.
+
+ This problem is now fixed in both the upper as low-level layer.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 2c8ccf2728f5e67d991cecf76c4057db75a87b67
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 16:55:47 2008 +0200
+
+ Makefile: fix bug introduced by commit 47ffd6c2
+
+commit 880f6a5d7596f42db5ff8803b797b78ec5b146e0
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Tue Sep 9 10:00:33 2008 -0400
+
+ ppc4xx: ppc440-generic-ALL: Fix out of tree build v2
+
+ This patch solves the problems compiling ml507, v5fx30teval and
+ ppc440-generic out of tree.
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit 47bebe34ca4e33bab0e822e4ceebbec2590ccbcb
+Author: Nícolas Carneiro Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
+Date: Thu Sep 4 15:35:46 2008 -0300
+
+ Fix dev_print when called from usb_stor_info (usb storage command)
+
+ Fix output of the usb storage command. It was printing "Device 0: not
+ available" because IF_TYPE_USB was not included into the switch
+ statement.
+
+ Signed-off-by: Nicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
+
+commit a4f243452cc8ce0c2c9b51a2520db4bde5f472de
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Sep 9 12:58:16 2008 +0200
+
+ FIT: make iminfo check hashes of all images in FIT, return 1 on failed check
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 919f550dc11a13abf01c6bc713c968de790b8d7c
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Sep 9 12:58:15 2008 +0200
+
+ FIT: add ability to check hashes of all images in FIT, improve output
+
+ - add function fit_all_image_check_hashes() that verifies if all
+ hashes of all images in the FIT are valid
+ - improve output of fit_image_check_hashes() when the hash check fails
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 1de1fa408967cef6804bb046b904114519bb36f0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 8 20:54:39 2008 +0200
+
+ qemu_mips: Update linux bootm to support dynamic cmdline
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f5ed9e39088ecfa5a5f3ef47b08e5bda7890d764
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 8 14:56:49 2008 -0500
+
+ Add support for booting of INTEGRITY operating system uImages
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 72f1b65f1b68bc6ed0d182eda1f3d6cf51b6414a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 8 21:01:29 2008 +0200
+
+ mips/bootm: Fix typo in commit c4f9419c, "initrd_start" replaced by "images->rd_start"
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9ba2e2c8191353d75b2d535e672a125be7b84c03
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Sep 8 13:57:12 2008 -0500
+
+ Remove support for booting ARTOS images
+
+ Pantelis Antoniou stated:
+ AFAIK, it is still used but the products using PPC are long gone.
+ Nuke it plz (from orbit).
+
+ So remove it since it cleans up a usage of env_get_char outside of
+ the environment code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 47ffd6c2fc72b46daa9d5d59eedb894fab2b7ee1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 15:45:18 2008 +0200
+
+ Makefile: compile and link each module just once
+
+ Several source files need to be compiled and linked when one or more
+ config options are selected. To allow for easy selection in the
+ Makefiles yet to avoild multiple compilation (which costs build time)
+ and especially multiple linking (which causes errors), we use
+ "COBJS = $(sort COBJS-y)" which eliminates duplicates.
+
+ By courtesy of Detlev Zundel who suggested this approach.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 48d0192fe869948fef14b460b5f0c85bca933693
+Author: Andreas Engel <andreas.engel@ericsson.com>
+Date: Mon Sep 8 14:30:53 2008 +0200
+
+ Moved conditional compile into Makefile
+
+ Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
+
+commit 20c9226cb8cab08a111ee73db04e62d943ee0c97
+Author: Andreas Engel <andreas.engel@ericsson.com>
+Date: Mon Sep 8 10:17:31 2008 +0200
+
+ Merged serial_pl010.c and serial_pl011.c.
+
+ They only differ in the init function.
+ This also adds the missing watchdog support for the PL011.
+
+ Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
+
+commit 0817d688f307ee2c0598e79175c94a40ce90337b
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Sun Sep 7 17:10:27 2008 -0400
+
+ Remove gap fill in srec object v2
+
+ SREC files do not need gap fill: The load address is specified in the
+ file. On the other hand, it can't be avoided in a .bin object. It has
+ no information about memory location.
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit 1dc306931ca5ce87f13916fa7165b052d3aa714f
+Author: Markus Heidelberg <markus.heidelberg@web.de>
+Date: Sun Sep 7 20:18:27 2008 +0200
+
+ README: fix missing subdirectory in the documentation
+
+ Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
+
+commit 3ef96ded38a8d33b58b9fab9cd879d51ddac4cbd
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Sep 7 07:08:42 2008 +1000
+
+ Update i386 code (sc520_cdp)
+
+ Attempt to bring i386 / sc520 inline with master
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 5608692104efa8d56df803dc79ea41ac3607eee5
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Sep 4 13:01:49 2008 +0200
+
+ fw_env: add NAND support
+
+ Add support for environment in NAND with automatic NOR / NAND recognition,
+ including unaligned environment, bad-block skipping, redundant environment
+ copy.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit dd794323a2a1ed6a8a5df51785c31bcde60ad7ca
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 9 09:50:24 2008 +0200
+
+ ppc4xx: Fix out-of-tree building of CPCI405 variants
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 59f630588e3fdbd698a0a2798e52a8924e899563
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Aug 15 15:42:11 2008 +0200
+
+ Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit e64987a892353f3d49eb242d997820ef8f538912
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 15 15:42:13 2008 +0200
+
+ 85xx: socrates: Enable Lime support.
+
+ This patch adds Lime GDC support together with support for the PWM
+ backlight control through the w83782d chip. The reset pin of the
+ latter is attached to GPIO, so we need to reset it in
+ early_board_init_r.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 3e79b588b5199f35016f178fc0d5d1266382097f
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Aug 15 15:42:12 2008 +0200
+
+ 85xx: Socrates: Major code update.
+
+ - Update the local bus ranges in the FDT for Linux for the various
+ devices connected to the local bus via chip-select.
+
+ - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
+ lower than 66 MHz and uses I/O accessor functions consequently.
+
+ - UPM data update.
+
+ - Update of default environment and configuration. Use I2C multibus
+ as we do have two I2C buses. Also enable sdram and ext2 commands.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit e8d18541c6ceab821f75faab031740b33fdbfa4b
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Jul 18 16:52:23 2008 +0200
+
+ Update Freescale 85xx boards to sys_eeprom.c
+
+ The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
+ format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
+ 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
+ Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit aab2bf0202c86227e3dcc8a5b58946087ebcc1af
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 10:08:02 2008 +0200
+
+ lib_ppc/interrupts.c: make board_show_activity() a weak function
+
+ This allows to use show_activity() without having to
+ define an empty board_show_activity() function.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fe876787f8743883ce58fed61525eaa2f34da4c5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 10:06:44 2008 +0200
+
+ stxxtc: remove empty CONFIG_SHOW_ACTIVITY functions
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 965de106ba8900372c8b16dc60d5acab7f925e38
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 10:03:47 2008 +0200
+
+ NETTA2: remove empty CONFIG_SHOW_ACTIVITY functions
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6cc64f9b5f69239c8b1969572b5a3a4aab7de5b9
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Aug 15 15:42:11 2008 +0200
+
+ Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 36241ca29d4804a1006fb3f26069effda5202581
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 15 15:42:13 2008 +0200
+
+ 85xx: socrates: Enable Lime support.
+
+ This patch adds Lime GDC support together with support for the PWM
+ backlight control through the w83782d chip. The reset pin of the
+ latter is attached to GPIO, so we need to reset it in
+ early_board_init_r.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 7a47753ddcaebbf2142809842f70c5f723bd9ddb
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Aug 15 15:42:12 2008 +0200
+
+ 85xx: Socrates: Major code update.
+
+ - Update the local bus ranges in the FDT for Linux for the various
+ devices connected to the local bus via chip-select.
+
+ - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
+ lower than 66 MHz and uses I/O accessor functions consequently.
+
+ - UPM data update.
+
+ - Update of default environment and configuration. Use I2C multibus
+ as we do have two I2C buses. Also enable sdram and ext2 commands.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 4d2ae70e8c31c22e5710df5ff236b5565ea2cf2c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 9 01:22:39 2008 +0200
+
+ disk-on-chip: remove duplicate doc_probe declaration
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3221b074a0ab199f6ae47c19cc22f42ddf3ef819
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 9 00:59:40 2008 +0200
+
+ onenand_uboot: fix warning: 'struct mtd_oob_ops' declared inside parameter list
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 13b4db0e2107175a8622ebb48529fa3ad8e12c75
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 9 00:59:39 2008 +0200
+
+ rs5c372: fix rtc_set prototype
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1bb8b2ef2722bbaea3cc5d46321ce1d99f9b56f7
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Thu Aug 14 14:08:28 2008 +0200
+
+ ARM: fix warning: target CPU does not support interworking
+
+ This patch fixes warnings like this:
+
+ start.S:0: warning: target CPU does not support interworking
+
+ which come from some ARM cross compilers and are caused by hard-coded
+ (with "--with-cpu=arm9" configuration option) ARM targets (which
+ support ARM Thumb instructions), while the ARM target selected from
+ the command line (with "-march=armv4") doesn't support Thumb
+ instructions.
+
+ This warning is issued by the compiler regardless of the real use of
+ the Thumb instructions in code.
+
+ To fix this problem, we use options according to compiler version
+ being used.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4265c35fbcb248e58179007621d61d32d0b3b82a
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Thu Aug 14 14:08:28 2008 +0200
+
+ ARM: Use do_div() instead of division for "long long".
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8febd13c69cb68652577d1a9fcbde954bf784155
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Jul 18 16:52:23 2008 +0200
+
+ Update Freescale 85xx boards to sys_eeprom.c
+
+ The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
+ format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
+ 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
+ Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 1055171ed05b7c4885737463d52b8d6c013bcb5d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 8 23:26:22 2008 +0200
+
+ lib_arm/bootm.c: fix compile warnings
+
+ bootm.c:128: warning: label 'error' defined but not used
+ bootm.c:65: warning: unused variable 'ret'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2e3c867d0a63c563a51e65b776973b008f16cec5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 8 22:46:42 2008 +0200
+
+ ml507: fix out of tree build problem
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9863a15a98f23b79f34a0e4f9e465bc6df5d504d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 8 22:10:28 2008 +0200
+
+ common/cmd_bootm.c: fix printf() format warnings
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4394f9a8c42bb1b0abc4fc04bd582d4db5f8b726
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 8 22:37:45 2008 +0200
+
+ BMW, PCIPPC2, PCIPPC6, RBC82: fix compile warnings
+
+ missing doc_probe() prototype.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2c5e3cc4994897d364b148942ff23e47783198f6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 8 21:28:14 2008 +0200
+
+ mk48t59: fix compile problem introduced by commit d1e23194
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5ff889349d2ace13f10c9335e09365fcec8247cc
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 8 14:11:12 2008 +0200
+
+ ppc4xx: Move ppc4xx specific prototypes to ppc4xx header
+
+ This patch moves some 4xx specific prototypes out of include common.h
+ to a ppc4xx specific header.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ac53ee8318678190bf3c68da477a84a657d86fb0
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Sep 5 15:34:04 2008 +0200
+
+ ppc4xx: Update CPCI405(AB) configuration
+
+ This patch add FDT support and command line editing capabilities
+ for CPCI405 and CPCI405AB boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7b1fbcadf73a83b3beb94abccda1c35e2c075a94
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Sep 5 15:34:03 2008 +0200
+
+ ppc4xx: Cleanup CPCI405 linker script
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 767f9159c5c94cd0cb3135b5b82814ad12816ddf
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Sep 5 15:34:02 2008 +0200
+
+ ppc4xx: Update CPCI405 variants handling
+
+ This patch replaces the BOARD_REVISION variable in include/config.mk
+ by a using a temporary include file in the platform directory.
+
+ The former way does not work anymore and the latter is also used by
+ some other boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f071f01fd09e9bf1cf09de37a7416aacce71bae1
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 8 10:01:48 2008 +0200
+
+ ppc4xx: Remove CONFIG_CS8952_PHY define
+
+ Since this define is only used on one board that was never really in
+ production, removing this compile time option doesn't hurt and makes
+ the code more readable.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6ca8646c1860bba74326bf916a5a3389a5c0d3b5
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Sep 5 14:11:40 2008 +0200
+
+ ppc4xx: Fix compilation warning for PIP405
+
+ This patch fixes a compilation warning for the PIP405 board. It moves the
+ #ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't
+ occur anymore. I am a little unsure if this #ifdef is at the correct
+ place now or if it could be removed completely. This needs to get
+ tested on the PIP405 board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 725b53ac61f4df3026b8f6489ef0080fd27d3816
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Sep 5 14:09:09 2008 +0200
+
+ ppc4xx: Fix compilation warning for canyonlands & glacier
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 302e52e0b1d4c7f994991709d0cb6c3ea612cdb5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Sep 5 14:40:29 2008 -0500
+
+ Fix compiler warning in mpc8xxx ddr code
+
+ ctrl_regs.c: In function 'compute_fsl_memctl_config_regs':
+ ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function
+ ctrl_regs.c:523: note: 'caslat' was declared here
+
+ Add a warning in DDR1 case if cas_latency isn't a value we know about.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d1e2319414ea5218ba801163e4530ecf2dfcbf36
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 1 23:06:23 2008 +0200
+
+ rtc: allow rtc_set to return an error and use it in cmd_date
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ee9536a28cb149bcb6c5dee9d08c62c91f4c72d2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 1 01:16:33 2008 +0200
+
+ ap325rxa/favr-32-ezkit: Use CONFIG_FLASH_CFI_DRIVER
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6b971c73f182248ce103503d74fbc0100bb8c8b7
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sun Aug 31 05:37:04 2008 +0900
+
+ config.mk: Move arch-specific condition to $(ARCH)_config.mk
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ea86b9e64b811753d9eabe0f560ee189fbe5d0c1
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 29 19:08:29 2008 -0500
+
+ Prevent crash if random/invalid ramdisks are passed to bootm
+
+ Adds returning an error from the ramdisk detection code if
+ its not a real ramdisk (invalid). There is no reason we can't
+ just return back to the console if we detect an invalid
+ ramdisk or CRC error.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8e02494e8f86c8f2d7324b5eb9e75271104a01ef
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 29 21:04:45 2008 +0200
+
+ Prevent crash if random DTB address is passed to bootm
+
+ This patch adds bootm_start() return value check. If
+ error status is returned, we do not proceed further to
+ prevent board reset or crash as we still can recover
+ at this point.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit cc347801add2689b1ee54d21f62bc14ecf6e1dd8
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Fri Aug 29 12:30:39 2008 -0500
+
+ clean up some #if !defined() in drivers/video/cfb_console.c
+
+ rearrange some #if !defined() / #else / #endif statements to remove
+ the negative logic.
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit c83f4c2d77f07174dcd6bef7e87a0f7017be7c33
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Fri Aug 29 09:02:20 2008 +0900
+
+ apollon: use the last memory area for u-boot
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit a6f2e455b774d0c5d56e44e5661df9adb69b6e07
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Aug 28 13:50:42 2008 +0200
+
+ TQM8272: move NAND part in seperate File
+
+ I didn't try to use drivers/mtd/nand/fsl_upm.c for the NAND driver,
+ because I have no longer access to the hardware.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 584f979f7ee914e32d408739cbdd2c4457ec18b8
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Aug 28 13:48:36 2008 +0200
+
+ TQM8272: Fix compiling error for the TQM8272 board.
+
+ Fix compile problems caused by
+ commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 1a7f8ccec981648ccd38fca2535490582eee08e6
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Wed Aug 27 14:45:20 2008 +0900
+
+ Add JFFS2 command support on OneNAND
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit f5c3ba79788b0e39baab7026d374fe375dd1a43f
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Mon Aug 25 19:21:30 2008 +0100
+
+ Allow console input to be disabled
+
+ Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE.
+
+ When CONFIG_DISABLE_CONSOLE is defined, setting
+ GD_FLG_DISABLE_CONSOLE disables all console input and output.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 2b22d608f370565c87f55928b524207031419c11
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Jul 30 12:39:29 2008 +0200
+
+ loads: allow negative offsets
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit e90fb6afab2c0c074dfb67bacb4de179eb188a24
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu Sep 4 11:19:05 2008 +0200
+
+ USB EHCI: reset root hub
+
+ Some of multi-function USB controllers (e.g. ISP1562) allow root hub
+ resetting only via EHCI registers. So, this patch adds the
+ corresponding kind of reset to OHCI's hc_reset() if the newly
+ introduced CONFIG_PCI_EHCI_DEVNO option is set (e.g. for Socrates
+ board).
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 5875d358f025c1b042d8a0f08384b756de7256c9
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Aug 15 15:42:09 2008 +0200
+
+ RX 8025 RTC: analyze 12/24-hour mode flag in rtc_get().
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 3e3c026ed746a284c6f0ef139b26d859939de7e9
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Sep 5 10:47:46 2008 +0200
+
+ devices: Use list_add_tail() instead of list_add() to register a device
+
+ This patch fixes a problem spotted on Glacier/Canyonlands (and most
+ likely lots of other board ports), that no serial output was seen
+ after console initialization in console_init_r(). This is because the
+ last added console device was used instead of the first added.
+
+ This patch fixes this problem by using list_add_tail() instead of
+ list_add() to register a device. This way the first added console
+ is used again.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 78d78236896d62bb8ca7302af38d8f1493eb2651
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date: Thu Sep 4 23:49:36 2008 -0700
+
+ ppc4xx: Add support for GPCS, SGMII and M88E1112 PHY
+
+ This patch adds GPCS, SGMII and M88E1112 PHY support
+ for the AMCC PPC460GT/EX processors.
+
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f6b6c45840f9b4671d2d97243a12a1f3ffb64765
+Author: Adam Graham <agraham@amcc.com>
+Date: Wed Sep 3 12:26:59 2008 -0700
+
+ ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routines
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 075d0b81e896e8735ae26372cd384f87cbd24e41
+Author: Adam Graham <agraham@amcc.com>
+Date: Wed Sep 3 12:26:28 2008 -0700
+
+ ppc4xx: IBM Memory Controller DDR autocalibration routines
+
+ Alternate SDRAM DDR autocalibration routine that can be generically used
+ for any PPC4xx chips that have the IBM SDRAM Controller core allowing for
+ support of more DIMM/memory chip vendors and gets the DDR autocalibration
+ values which give the best read latency performance (SDRAM0_RDCC.[RDSS]).
+
+ Two alternate SDRAM DDR autocalibration algoritm are provided in this patch,
+ "Method_A" and "Method_B". DDR autocalibration Method_A scans the full range
+ of possible PPC4xx SDRAM Controller DDR autocalibration values and takes a
+ lot longer to run than Method_B. Method_B executes in the same amount of time
+ as the currently existing DDR autocalibration routine, i.e. 1 second or so.
+ Normally Method_B is used and it is set as the default method.
+
+ The current U-Boot PPC4xx DDR autocalibration code calibrates the IBM SDRAM
+ Controller registers.[bit-field]:
+ 1) SDRAM0_RQDC.[RQFD]
+ 2) SDRAM0_RFDC.[RFFD]
+
+ This alternate PPC4xx DDR autocalibration code calibrates the following
+ IBM SDRAM Controller registers.[bit-field]:
+
+ 1) SDRAM0_WRDTR.[WDTR]
+ 2) SDRAM0_CLKTR.[CKTR]
+ 3) SDRAM0_RQDC.[RQFD]
+ 4) SDRAM0_RFDC.[RFFD]
+
+ and will also use the calibrated settings of the above four registers that
+ produce the best "Read Sample Cycle Select" value in the SDRAM0_RDCC.[RDSS]
+ register.[bit-field].
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e07f4a8033b6270b8103049adb6456f660ff4a89
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Sep 1 13:09:39 2008 -0400
+
+ ppc44x: Unification of virtex5 pp440 boards
+
+ This patch provides an unificated way of handling xilinx v5 ppc440 boards.
+
+ It unificates 3 different things:
+
+ 1) Source code
+ A new board called ppc440-generic has been created. This board includes
+ a generic tlb initialization (Maps the whole memory into virtual) and
+ defines board_pre_init, checkboard, initdram and get_sys_info weakly,
+ so, they can be replaced by specific functions.
+
+ If a new board needs to redefine any of the previous functions
+ (specific initialization) it can create a new directory with the
+ specific initializations needed. (see the example ml507 board).
+
+ 2) Configuration file
+ Common configurations are located under configs/xilinx-ppc440.h, this
+ header file interpretes the xparameters file generated by EDK and
+ configurates u-boot in correspondence. Example: if there is a Temac,
+ allows CMD_CONFIG_NET
+ Specific configuration are located under specific configuration file.
+ (see the example ml507 board)
+
+ 3) Makefile
+ Some work has been done in order to not duplicate work in the Main
+ Makefile. Please see the attached code.
+
+ In order to support new boards they can be implemented in the next way:
+
+ a) Simple Generic Board (90% of the time)
+ Using EDK generates a new xparameters.h file, replace
+ ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config
+ && make
+
+ b) Simple Boards with special u-boot parameters (9 % of the time)
+ Create a new file under configs for it (use ml507.h as example) and
+ change your paramaters. Create a new Makefile paragraph and compile
+
+ c) Complex boards (1% of the time)
+ Create a new folder for the board, like the ml507
+
+ Finally, it adds support for the Avnet FX30T Evaluation board, following
+ the new generic structure:
+
+ Cheap board by Avnet for evaluating the Virtex5 FX technology.
+
+ This patch adds support for:
+ - UartLite
+ - 16MB Flash
+ - 64MB RAM
+
+ Prior using U-boot in this board, read carefully the ERRATA by Avnet
+ to solve some memory initialization issues.
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 64ac1eb5afafced49b327425ad1814b2dc422d6e
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Tue Sep 2 15:21:16 2008 -0500
+
+ mpc83xx: fix mpc8313 in-tree building with NAND
+
+ and add mpc8313 NAND build to MAKEALL
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6eb2a44e27919fdc601e0c05404b298a7602c0e3
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Aug 28 14:09:25 2008 -0700
+
+ mpc83xx: clean up cache operations and unlock_ram_in_cache() functions
+
+ Cleans up some latent issues with the data cache control so that
+ dcache_enable() and dcache_disable() will work reliably (after
+ unlock_ram_in_cache() has been called)
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 46497056ae3b1e81e736e9cf3a170472c5d9719f
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Aug 28 14:09:19 2008 -0700
+
+ mpc83xx: Store and display Arbiter Event Register values
+
+ Record the Arbiter Event Register values and optionally display them.
+
+ The Arbiter Event Register can record the type and effective address of
+ an arbiter error, even through an HRESET. This patch stores the values in
+ the global data structure.
+
+ Display of the Arbiter Event registers immediately after the RSR value
+ can be enabled with defines. The Arbiter values will only be displayed
+ if an arbiter event has occured since the last Power On Reset, and either
+ of the following defines exist:
+ #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and
+ and type register values
+ #define CONFIG_DISPLAY_AER_FULL - display and interpret the arbiter
+ event register values
+
+ Address Only transactions are one of the trapped events that can register
+ as an arbiter event. They occur with some cache manipulation instructions
+ if the HID0_ABE (Address Broadcast Enable) is set and the memory region
+ has the MEMORY_COHERENCE WIMG bit set. Setting:
+ #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address
+ only events, so that it can still capture
+ other real problems.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit ade50c7fa1b16ef98be17e9c3ae286aecf4f5605
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Aug 28 14:09:11 2008 -0700
+
+ mpc83xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
+
+ This is needed in unlock_ram_in_cache() because it is called from C and
+ will corrupt the small data area anchor that is kept in R2.
+
+ lock_ram_in_cache() is modified similarly as good coding practice, but
+ is not called from C.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d9fe88173cb4f7d293796ffe10c7a0d3d426d8f9
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Fri Aug 22 23:52:50 2008 -0700
+
+ MPC83XX: Fix GPIO configuration - set gpio level before direction
+
+ Set DAT value before DIR values to avoid creating glitches on the
+ GPIO signals.
+
+ Set gpio level register before direction register to inhibit
+ glitches on high level output pins.
+
+ Dir and data gets cleared at powerup, so high level output lines see
+ a short low pulse between setting the direction and level registers.
+
+ Issue was seen on a new board with the nReset line of the NOR flash
+ connected to a GPIO. Setting the direction register puts the NOR flash
+ in reset so the next instruction to set the level cannot get executed.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 7007c5975ee900ad70983b0681d3251e221f8321
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 2 02:58:32 2008 +0200
+
+ doc/qemu_mips: add doc howto debug u-boot with gdb
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7deb3b3ecd0e81ef09bb68aa0ec2346f4ae0a405
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Sep 3 17:15:45 2008 +0200
+
+ ppx4xx: Fix broken DASA_SIM board
+
+ This patch adds initdram() to DASA_SIM boards that has been
+ removed accidentally by a previous commit.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7e410aa30fbcb1d19a26bbf1e84a9ca6102d534b
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 1 08:35:37 2008 +0200
+
+ ppc4xx: Remove reference to common/lists.o from some esd linker scripts
+
+ This patch removes some direct references to common/lists.o from some
+ esd linker scripts. This is necessary because the lists source was moved
+ and is not in the "common" directory anymore.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 97b0734d65f8a0b03df0a335a2addc759da56107
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 16:33:05 2008 +0200
+
+ ppc4xx: Remove obsolete or unused functions from some esd boards
+
+ This patch removes initdram() and testdram() from most esd 405 platforms.
+ Some boards also have an empty dummy implementation of
+ misc_init_f(). This is also removed.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1092ce218c514e5ccb18450ac5af501d96d6e3e9
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 15:07:54 2008 +0200
+
+ ppc4xx: Update VOM405 board configuration
+
+ - remove PCI code
+ - add command line editing
+ - minor cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 830c800e28e96ec7c3c6936a0bd1b9461f3e77d4
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 15:07:53 2008 +0200
+
+ ppc4xx: Remove obsolete initdram() function from VOM405 board
+
+ This patch removed the obsolete initdram() function from
+ VOM405 platform file.
+
+ Some minor cleanup.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3d4dd7a941b2327b8c2fc535b782ca307ff8b6c8
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 15:07:52 2008 +0200
+
+ ppc4xx: Cleanup VOM405 linker script
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fcaffd597f6f5191b12ca66c2a4789bbdeea85c2
+Author: Matthias Fuchs <mf@esd.eu>
+Date: Tue Sep 2 15:07:51 2008 +0200
+
+ ppc4xx: Add fdt support for VOM405 boards
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9ec367aa2c5dcf79558aa2b209b45d7686654c14
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:36:14 2008 +0200
+
+ ppc4xx: Coding style cleanup
+
+ Wrap long lines etc.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 17e65c21adfb63980e6aff80bfbd2df0eeb12060
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:35:56 2008 +0200
+
+ ppc4xx: Enable USB on PLU405 boards
+
+ This patch enables the PCI-OHCI controller on PLU405 board.
+
+ Also the default CPU frequency is updated to 266 MHz and
+ command line editing is enabled.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 40e43e3b87d57b2ac786e27f6e25a7df9940d93b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:35:35 2008 +0200
+
+ ppc4xx: Cleanup PLU405 platform file
+
+ This patch
+ - wraps some long lines
+ - removes unused/obsolete functions: misc_init_f() and initdram()
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d74cdb1d0614ab78128e0735a51e7988a7b7ea33
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:35:04 2008 +0200
+
+ ppc4xx: Cleanup PLU405 linker script
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3bc1054cec2f6b25822f301ea922a16233baa4c7
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:34:36 2008 +0200
+
+ ppc4xx: Add fdt support for PLU405 boards
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5a3e480b783bfbc139586293a54fb875d7c5c5d4
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:34:08 2008 +0200
+
+ ppc4xx: Increase U-Boot size to 384kB for PLU405 boards
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit be1b0d2777e179191a57b138b660547a17e55aad
+Author: Jochen Friedrich <jochen@scram.de>
+Date: Tue Sep 2 11:24:59 2008 +0200
+
+ Don't tftp to unknown flash
+
+ If a board has a variable number of flash banks, there are empty entries
+ in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with
+ "Outside available Flash". This patch skips flash banks with unknown
+ flash ids.
+
+ Signed-off-by: Jochen Friedrich <jochen@scram.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 33314470ab32a3f5412bb61b5f3d6c216c88bf9b
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 13:40:44 2008 +0900
+
+ net: smc911x: Add pkt_data_pull and pkt_data_push function
+
+ The RSK7203 board has the SMSC9118 wired up 'incorrectly'.
+ Byte-swapping is necessary, and so poor performance is inevitable.
+ This problem cannot evade by the swap function of CHIP, this can
+ evade by software Byte-swapping.
+ And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
+ functions necessary to solve this problem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 10efa024b8ffd9e6aaca63da8bddfdffdc672274
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 20:37:00 2008 -0700
+
+ Moved initialization of EEPRO100 Ethernet controller to board_eth_init()
+
+ Affected boards:
+ db64360
+ db64460
+ katmai
+ taihu
+ taishan
+ yucca
+ cpc45
+ cpu87
+ eXalion
+ elppc
+ debris
+ kvme080
+ mpc8315erdb
+ integratorap
+ ixdp425
+ oxc
+ pm826
+ pm828
+ pm854
+ pm856
+ ppmc7xx
+ sc3
+ sc520_spunk
+ sorcery
+ tqm8272
+ tqm85xx
+ utx8245
+
+ Removed initialization of the driver from net/eth.c
+ Also, wrapped contents of pci_eth_init() by CONFIG_PCI.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8ca0b3f99c4fce7a599dcaf92ae095496dc8c8e0
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:45:44 2008 -0700
+
+ Moved initialization of TULIP Ethernet controller to board_eth_init()
+
+ Affected boards:
+ cu824
+ bab7xx
+ adciop
+ dasa_sim
+ mousse
+ mpc8540eval
+ musenki
+ mvblue
+ pcippc2/pcippc6
+ sbc8240
+ stxssa
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ad3381cf4167120db5c7b88e4970245e1d5c0a32
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:44:19 2008 -0700
+
+ Moved initialization of E1000 Ethernet controller to board_eth_init()
+
+ Affected boards:
+ ap1000
+ mvbc_p
+ PM854
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 4fce2aceaf8afd31a252bc782c9dbc497bf40487
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:40:51 2008 -0700
+
+ Moved initialization of plb2800 Ethernet driver to board_eth_init
+
+ Affected boards:
+ purple
+
+ Removed initialization of controller from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e1d7480b5de1fd4830bf7cf5e2237d3b0846d08d
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:39:12 2008 -0700
+
+ Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory
+
+ Modified board_eth_init() functions of boards that have this FEC in addition
+ to other Ethernet controllers.
+
+ Affected boards:
+ bc3450
+ icecube
+ mvbc_p
+ o2dnt
+ pm520
+ total5200
+ tq5200
+
+ Removed initialization of controller from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a0aad08f9427ac00218bdb2cb649833ce6ec9b8d
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:36:38 2008 -0700
+
+ Moved initialization of MPC512x_FEC Ethernet driver to CPU directory
+
+ Added a cpu_eth_init() function to MPC512x CPU directory and
+ removed code from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8218bd2aa68820b878a8413493ae17fd8d21f944
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:16:59 2008 -0700
+
+ Moved initialization of IncaIP Ethernet controller to board_eth_init
+
+ Affected boards:
+ IncaIP
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 164846eeb25cb2a5ede7ab9371fdca7f4831a055
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:15:26 2008 -0700
+
+ Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()
+
+ Affected boards:
+ AmigaOneG3SE
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6aca145e067efe75398e9fac97822bd3700de0b2
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:13:34 2008 -0700
+
+ Moved initialization of GT6426x Ethernet controller to board_eth_init()
+
+ Affected boards:
+ EVB64260
+ P3G4
+ ZUMA
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e3090534d62045dcb73f5392bacc64a4e8e443dc
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:08:43 2008 -0700
+
+ Moved initialization of PCNET Ethernet controller to board_eth_init()
+
+ Affected boards:
+ PN62
+ sc520_cdp
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b902b8dda5e1fd4d5fe2f202c71ee3521d2c40ed
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:07:16 2008 -0700
+
+ Moved initialization of NATSEMI Ethernet controller to board_eth_init()
+
+ Affected boards:
+ a3000
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 19403633dd70333893c2da7926a1d0dcd6dab7d8
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:03:22 2008 -0700
+
+ Moved initialization of NS8382X Ethernet controller to board_eth_init()
+
+ Affected boards:
+ bc3450
+ cpci5200
+ mecp5200
+ pf2000
+ icecube
+ o2dnt
+ pm520
+ sandpoint8245
+ total5200
+ tqm5200
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ccdd12f83ef93719fbe85f642aa4dc648b9498f0
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 09:59:33 2008 -0700
+
+ Moved initialization of TSI108 Ethernet controller to board_eth_init()
+
+ Affected boards:
+ mpc7448hpc2
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0b252f50ae218ae15bfb63af44227972686ebc56
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 21:41:08 2008 -0700
+
+ Moved initialization of RTL8139 Ethernet controller to board_eth_init()
+
+ Affected boards:
+ hidden_dragon
+ MPC8544DS
+ MPC8610HPCN
+ R2DPLUS
+ TB0229
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 02d69891d95ee76b0e86e1715a4dc0b964a57cb7
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 09:49:42 2008 -0700
+
+ Moved initialization of RTL8169 Ethernet controller to board_eth_init()
+
+ Affected boards:
+ linkstation
+ r7780mp
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3ae071e44256144d6c1e3febb65f6c56bd433769
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Aug 12 22:11:53 2008 -0700
+
+ Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init()
+
+ Removed at91sam9_eth_initialize() from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 89973f8a82c28ad893c4c3cc56839a8e10fe5f13
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 22:22:04 2008 -0700
+
+ Introduce netdev.h header file and remove externs
+
+ This addresses all drivers whose initializers have already
+ been moved to board_eth_init()/cpu_eth_init().
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 5a8a163ac394d9f4f7ff57f415d82bd673b0068c
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:30 2008 -0500
+
+ Add pixis_set_sgmii command
+
+ The 8544DS and 8572DS platforms support an optional SGMII riser card to
+ expose ethernet over an SGMII interface. Once the card is in, it is also
+ necessary to configure the board such that it uses the card, rather than
+ the on-board ethernet ports. This can either be done by flipping dip switches
+ on the motherboard, or by modifying registers in the pixis. Either way
+ requires a reboot.
+
+ This adds a command to allow users to choose which ports are routed through
+ the SGMII card, and which through the onboard ports. It also allows users
+ to revert to the current switch settings.
+
+ This code does not work on the 8572, as the PIXIS is different.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 216f2a7156a5fde7b47adc40ad553c888a9cbaa7
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:29 2008 -0500
+
+ Add SGMII support for the 8544 DS
+
+ The 8544 DS has an optional SGMII Riser card, which uses different PHY
+ addresses. Check if we are in SGMII mode, and invoke the SGMII Riser
+ setup code if so.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 652f7c2eef76a1340928bd660845441e932d86a2
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:28 2008 -0500
+
+ Add support for Freescale SGMII Riser Card
+
+ The 8544DS and 8572DS systems have an optional SGMII riser card which
+ exposes new ethernet ports which are connected to the eTSECs via an
+ SGMII interface. The SGMII PHYs for this board are offset from the standard
+ PHY addresses, so this code modifies the passed in tsec_info structure to
+ use the SGMII PHYs on the card, instead.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2abe361c03b43e6dcf68f54e96b5c05156c49284
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:27 2008 -0500
+
+ Add SGMII support to the tsec
+
+ Adds support for configuring the TBI to talk properly with the SerDes.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 75b9d4ae0d69f214eab641caf12ce8af83a39a42
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:26 2008 -0500
+
+ Pass in tsec_info struct through tsec_initialize
+
+ The tsec driver contains a hard-coded array of configuration information
+ for the tsec ethernet controllers. We create a default function that works
+ for most tsecs, and allow that to be overridden by board code. It creates
+ an array of tsec_info structures, which are then parsed by the corresponding
+ driver instance to determine configuration. Also, add regs, miiregs, and
+ devname fields to the tsec_info structure, so that we don't need the kludgy
+ "index" parameter.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit dd3d1f56a01f460d560766126ee7dfed2ea9bc10
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:25 2008 -0500
+
+ tsec: Move tsec.h to include/
+
+ This is to prepare the way for board code passing in the tsec_info structure
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d23dc394aa69093b6326ad917db04dc0d1aff3f8
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Jun 6 15:52:44 2008 +0200
+
+ PHY: Add support for the M88E1121R Marvell chip.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1711f3bd16d1c5e9d17b4c0198b426d86999781b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 2 21:17:36 2008 +0200
+
+ fw_env.c: fix build problems with MTD_VERSION=old
+
+ (as needed to support old 2.4 Linux kernel based releases)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 628ffd73bcff0c9f3bc5a8eeb2c7455fe9d28a51
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 1 17:11:26 2008 +0200
+
+ device: make device_register() clone the device
+
+ This is expected by the callers, but this fact was hidden well within
+ the old list implementation.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c75e772a2f061a508bba28ded1b5bea91f0442b0
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Aug 31 23:28:15 2008 +0900
+
+ sh: Remove CC line from board's Makefile
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 468eae0660de6fdfd9999944c536ecc4797bd944
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Aug 31 23:25:57 2008 +0900
+
+ sh: Replaced "@./mkconfig" for @$(MKCONFIG)
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 3aeb1ff7482a732503186c742d3a5ded4b7a0d34
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 14:50:52 2008 +0900
+
+ sh: Add support sh2 to MAKEALL
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6f3d8bb5faa12dbf3031382286784c978df038ee
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 14:52:23 2008 +0900
+
+ sh: Fix compile error rsk7203 board
+
+ This boards used old type preprocessor.
+ This patch fix compile error.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1c98172e025018552e9bb4c43b0aaee76f79b1aa
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 14:53:31 2008 +0900
+
+ sh: Fix compile error sh7785lcr board
+
+ This boards used old type preprocessor.
+ This patch fix compile error.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6f0da4972e48f99d37bc522814940a6022cd3084
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Aug 22 17:39:09 2008 +0900
+
+ sh: Renesas Solutions AP325RXA board support
+
+ AP325RXA is SH7723's reference board.
+ This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
+ In this patch, support SCIF, NOR Flash, and Ethernet.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ab09f433b50bb83b5e440c335bc3839ee069e534
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Aug 22 17:48:51 2008 +0900
+
+ sh: add support Renesas SH7723
+
+ Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other.
+ This patch supports CPU register's header file and SCIF serial driver.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c655fad06ba3fb042dbc667724a40e1a9a091248
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Aug 31 23:02:04 2008 +0900
+
+ sh: Renesas RSK+ 7203 board support
+
+ This adds initial support for the RTE RSK+ SH7203 board.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6ede753ddf52a7b0f992d9bccbe5e4a0968ca475
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Jul 3 23:11:02 2008 +0900
+
+ sh: Add support Renesas SH7203 processor
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6ad43d0dd86b612895ddc7f480eb6cdfe793adf9
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Aug 31 22:48:33 2008 +0900
+
+ sh: Add support SH2/SH2A which is CPU of Renesas Technology
+
+ Add support SH2/SH2A basic function.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0d53a47dc0737b6aa3a39caee21410c169441ae5
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Aug 31 22:45:08 2008 +0900
+
+ sh: Renesas R0P7785LC0011RL board support
+
+ This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
+ Graphic, Ethernet, USB, SD, RTC, and I2C controller.
+
+ This patch supports the following functions:
+ - 128MB DDR2-SDRAM (29-bit address mode only)
+ - NOR Flash
+ - USB host
+ - Ethernet
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b0b6218929bc7de9a6bdb8e564fa8ec2efa71b4e
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Thu Jul 10 19:32:53 2008 +0900
+
+ sh: add support for SH7785
+
+ Renesas SH7785 has DDR2-SDRAM controller, PCI, and other.
+ This patch supports CPU register's header file.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit d6e04258be8f2408845468d3cf722a4cf0433445
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 04:45:42 2008 +0200
+
+ davinci: fix remaining dm644x_eth
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 08ab4e1780fa63c88dd5a5ab52f4ff4ed1ee1878
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 04:24:56 2008 +0200
+
+ fs: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c1de7a6daf9c657484e1c6d433f01fccd49a7f48
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 04:24:55 2008 +0200
+
+ devices: merge to list_head
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ef0255fc75f28655f9681422079287d68a14dbaa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 04:24:51 2008 +0200
+
+ update linux/list
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 71cb31227bee741b274f6c0279b2aac1ab8e28e3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 00:39:48 2008 +0200
+
+ smdk6400: add gitignore
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f9f692e2b146d4e306b777e6d5f69f1d725b9eb9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 00:39:48 2008 +0200
+
+ smdk6400: Use CONFIG_FLASH_CFI_DRIVER
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7c0e5a8db3d1358b0ce3cc85ada0de6341ca4a15
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:47 2008 +0200
+
+ smdk6400: remove redundant bootargs definition
+
+ Double bootargs setting leads to a duplicated environmant entry.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 11edcfe260f20dcea79284a3e95270989d433854
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:47 2008 +0200
+
+ ARM: Add support for S3C6400 based SMDK6400 board
+
+ SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
+ driver for it too. The board can also boot from the NOR flash, but due to
+ hardware limitations it can only address 64KiB on it, which is not enough
+ for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit e0056b341069796eaea11eae0fc8eb93a3dceaac
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:47 2008 +0200
+
+ NAND: add NAND driver for S3C64XX
+
+ Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 3fe7b589f9c7463df39056f8872006a67f56a91c
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:47 2008 +0200
+
+ S3C64XX: remove broken HWFLOW support from the serial driver
+
+ As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is
+ broken and currently unused. Remove it.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 2fb28dcf82048045e1bf5014e938e486fa6c2383
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:47 2008 +0200
+
+ serial: add S3C64XX serial driver
+
+ Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 8262813ca04fc57f5d8856e1828085c136e0f1eb
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:46 2008 +0200
+
+ USB: Add support for OHCI controller on S3C6400
+
+ Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could
+ try to enable the MMU, but map addresses 1-to-1, and disable data cache, then
+ it should work too and we could still profit from instruction cache.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 9b07773f8883665b002500c190507e9fd99b7181
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:46 2008 +0200
+
+ ARM: Add arm1176 core with S3C6400 SoC
+
+ Based on the original S3C64XX port by Samsung for U-Boot 1.1.6.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit fcaac589a68115819ddadcf5c18ded9a5f9e2c75
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Sun Aug 31 00:39:46 2008 +0200
+
+ ARM DaVinci: Changing function names for EMAC driver
+
+ DM644x is just one of a series of DaVinci chips that use the EMAC driver.
+ By replacing all the function names that start with dm644x_* to davinci_*
+ we make these function more portable. I have tested this change on my EVM.
+ DM6467 is another DaVinci SOC which uses the EMAC driver and i will
+ be sending patches that add DaVinci DM6467 support to the list soon.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit fbbb1de369ca7d5ace6f7b0ce9d0aee24a6f457b
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Sat Aug 30 23:21:30 2008 +0200
+
+ Integrator[AP/CP] - Remove unused file memsetup.S
+
+ - memsetup.s is changed/merged to lowlevel_init.S
+ memsetup.S has a global label memsetup that just returns back to caller
+ - memsetup global label is changed/merged to lowlevel_init
+ This label is not called from anywhere.
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit 89d51d022a63be1a851eda983c8cbce1a044f65f
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Wed Aug 27 21:35:52 2008 +0200
+
+ ARM DaVinci: Standardize names of directories/files
+
+ ARM DaVinci: Standardize names of directories/files.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 264bbdd11d01f14f5ea4629556ae63b00b13402d
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Jul 11 15:10:13 2008 -0400
+
+ ARM DaVinci: Move common functions to board/davinci/common
+
+ ARM DaVinci: Move common functions to board/davinci/common.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit c2b4b2e4814f4ace9015fdb64132894327400bf0
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 29 11:56:49 2008 +0200
+
+ ppc4xx/NAND: Add select_chip function to 4xx NDFC driver
+
+ This function is needed for the new NAND infrastructure. We only need
+ a dummy implementation though for the NDFC.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3d4a746e2fb4545f07d871049805fb34ae97cc94
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 29 12:06:27 2008 +0200
+
+ ppc4xx: Increase image size for NAND boot target
+
+ This is needed since now with HUSH enabled (amcc-common.h) the image
+ read from NAND exceeds the previous limit.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6b5049d056cd8ef72d1f2f461ceb2d033d93f759
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Aug 28 23:58:30 2008 -0700
+
+ Move MPC512x_FEC driver to drivers/net
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 80b00af01b3c9154774de2936f05a051e92f6a03
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Aug 28 23:58:29 2008 -0700
+
+ Move MPC5xxx_FEC driver to drivers/net
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3de7bf0e6b1ad2608014096c8192f13229b2e9d7
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 21:53:57 2008 +0200
+
+ cmd_terminal: remove no need ifdef
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 578118bdf122877ae769776be002255be447b4fa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 21:53:57 2008 +0200
+
+ common/Makefile: order by functionality
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ba7b5b2348b684cf8ec424b2e38e267dc1cfd2fb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 21:53:56 2008 +0200
+
+ miiphyutil: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 81789c39db3f0f6b621df8c0ec66014d701f368e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 21:53:37 2008 +0200
+
+ autoscript: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bbf52df9aa94ffb115b8b1ebeb00d01374bb0a1d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 01:18:11 2008 +0200
+
+ crc16: move to lib_generic
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 55195773eacefb22dd483a3c560ea30a14263ce1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 01:18:01 2008 +0200
+
+ miiphybb: move to drivers/net/phy
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e8314035996a9118ac5948df2ff8a2f2161ed67a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Aug 28 12:31:51 2008 +0200
+
+ soft_spi: move to drivers/spi
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4d75e0aa9caca64d4a1d55d95cd1ca5f30d9fc56
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Aug 28 12:31:51 2008 +0200
+
+ soft_i2c: move to drivers/i2c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 717a222229fdb77703e9174d0eb08a4b41febf49
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Aug 28 12:31:48 2008 +0200
+
+ gunzip: move to lib_generic
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 52aef8f9ba28b747973bf76741c23db658d5773c
+Author: Wolfgang Ocker <weo@reccoware.de>
+Date: Tue Aug 26 19:55:23 2008 +0200
+
+ ppc4xx: NAND configuration
+
+ Made NAND bank configuration setting a config variable.
+
+ Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5bc542a593abc9e974fbd34704af85c37c366c60
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date: Thu Aug 28 16:03:28 2008 -0700
+
+ ppc4xx: fix UIC external_interrupt hang on UIC0
+
+ This patch fixes a UIC external_interrupt hang if critical or non-critical
+ interrupt is set at the same time as a normal interrupt is set on UIC0.
+
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 04737d5ffd16248cb80ab3dd4f3765057a803f18
+Author: Prodyut Hazarika <phazarika@amcc.com>
+Date: Wed Aug 27 16:39:00 2008 -0700
+
+ ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller
+
+ Removed Magic numbers from Initialization preload registers
+ Tested with Kilauea, Glacier, Canyonlands and Katmai boards
+ About 5-7% improvement seen for LMBench memtests
+
+ Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8a490422bed685c9491274ec997f62061d88620b
+Author: John Rigby <jrigby@freescale.com>
+Date: Thu Aug 28 13:17:07 2008 -0600
+
+ ADS5121: Fix NOR and CPLD ALE timing for rev 2 silicon
+
+ MPC5121 rev 2 silicon has a new register for controlling how long
+ CS is asserted after deassertion of ALE in multiplexed mode.
+
+ The default is to assert CS together with ALE. The alternative
+ is to assert CS (ALEN+1)*LPC_CLK clocks after deassertion of ALE.
+
+ The default is wrong for the NOR flash and CPLD on the ADS5121.
+
+ This patch turns on the alternative for CS0 (NOR) and CS2 (CPLD)
+ it does so conditionally based on silicon rev 2.0 or greater.
+
+ Signed-off-by: Martha J Marx <mmarx@silicontkx.com>
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 5d9a5efa4b332f442b54a755d49969123c3a8742
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 00:56:46 2008 +0600
+
+ Add I2C frequency dividers for ColdFire
+
+ The existing I2C freqency dividers for FDR does not apply
+ to ColdFire platforms; thus, a seperate table is added
+ based on MCF5xxx Reference Manual
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: Tabi Timur <timur@freescale.com>
+
+commit eec567a67e00d1ed8d941e9098b7d421f4091abf
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 03:01:19 2008 +0600
+
+ ColdFire: I2C fix for multiple platforms
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit d53cf6a9c7423cba668b867978648645f71c3090
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 00:37:13 2008 +0600
+
+ ColdFire: Add CONFIG_MII_INIT for M5272C3
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit f78ced3028d4130b24a318943a70cf5584ab16f4
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 00:26:25 2008 +0600
+
+ ColdFire: Multiple fixes for MCF5445x platforms
+
+ Add FEC pin set and mii reset in __mii_init(). Change
+ legacy flash vendor from 2 to AMD LEGACY (0xFFF0),
+ change cfi_offset to 0, and change CFG_FLASH_CFI to
+ CONFIG_FLASH_CFI_LEGACY. Correct M54451EVB and
+ M54455EVB env settings in configuration file.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 454e725b3a9537b7f273bbd0cbca180f23a7a6e8
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Fri Aug 15 18:24:25 2008 +0000
+
+ ColdFire: Change the SDRAM BRD2WT timing from 3 to 7
+
+ The user manuals recommend 7.
+
+ Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+ Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 79e0799cf6e88d98d77b216a55234bf674b59a4e
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Fri Aug 15 16:50:07 2008 +0000
+
+ ColdFire: Raise uart baudrate to 115200 bps
+
+ M5249EVB, M5271EVB, M5272C3, M5275EVB and M5282EVB platforms
+ uart baudrate increase from 19200 to 115200 bps
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit ab6ba842682552ccf071d0034da0a20633d1d1ac
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 13 12:07:03 2008 +0000
+
+ ColdFire: Fix board.c warning message
+
+ Implicit declaration of nand_init() warning message
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 5798b1c4650e9a8713c95b25c1e669a2bc80a97b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 27 01:10:34 2008 -0500
+
+ FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 258c37b147353bc522ffc33dfbd7d0d9cd7c32d7
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Aug 21 20:44:49 2008 +0200
+
+ mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 9cff4448a9cb882defe6c8bde73b77fc0c636799
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 19 14:46:36 2008 -0500
+
+ mpc85xx: remove redudant code with lib_ppc/interrupts.c
+
+ For some reason we duplicated the majority of code in lib_ppc/interrupts.c
+ not show how that happened, but there is no good reason for it.
+
+ Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
+ they exist.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9490a7f1a9484617bad75c60807ce02c8a3a6d56
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jul 25 13:31:05 2008 -0500
+
+ mpc85xx: Add support for the MPC8536DS reference board
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ Signed-off-by: Dejan Minic <minic@freescale.com>
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ef50d6c06ece74fb17e8d7510e62cad9df8b810d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 12 11:14:19 2008 -0500
+
+ mpc85xx: Add support for the MPC8536
+
+ The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We
+ also have SERDES init code for the 8536.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ Signed-off-by: Dejan Minic <minic@freescale.com>
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 129ba616b3813dde861f25f3d8a3c47c5c36ad5f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 12 11:13:08 2008 -0500
+
+ mpc85xx: Add support for the MPC8572DS reference board
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 457caecdbca3df21a93abff19eab12dbc61b7897
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 27 01:05:35 2008 -0500
+
+ FSL DDR: Remove old SPD support from cpu/mpc85xx
+
+ All 85xx boards have been converted to the new code so we can
+ remove the old SPD DDR setup code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0e7927db138976469e7257e29c1338050a50fcd9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 27 01:04:07 2008 -0500
+
+ FSL DDR: Convert STXSSA to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c360d9b970fbb9c13744c355879671165bbb9b9e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 27 01:03:42 2008 -0500
+
+ FSL DDR: Convert STXGP3 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8e55313b7ae12352a343f9b9962e662dbd897187
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:52:58 2008 -0500
+
+ FSL DDR: Convert SBC8560 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9658bec2e8f55d56ca1be70090ce5a348be4980f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:52:32 2008 -0500
+
+ FSL DDR: Convert MPC8540EVAL to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6bfa8f723cfd82c55e3ef5620ade396916470a70
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:52:07 2008 -0500
+
+ FSL DDR: Convert PM856 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d53bd3e17bd4f460257c19255569ea6dcfaae817
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:51:49 2008 -0500
+
+ FSL DDR: Convert PM854 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 33b9079ba20926f14238fff863b68a98e938948e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:15:28 2008 -0500
+
+ FSL DDR: Convert sbc8548 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a947e4c7eb15cea1d9fb633955c516aab5ad35dd
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:14:14 2008 -0500
+
+ FSL DDR: Convert atum8548 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit be0bd8234b9777ecd63c4c686f72af070d886517
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 22:56:56 2008 -0500
+
+ FSL DDR: Convert socrates to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1167a2fd56138b716e01370c4267f3b70bf9ffa0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 08:02:30 2008 -0500
+
+ FSL DDR: Convert MPC8544DS to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e6f5b35b41ddbd637bb9ca4ad985b1e0b07dae0e
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Mar 18 13:51:05 2008 -0500
+
+ FSL DDR: Convert MPC8568MDS to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e31d2c1e2bc954dc32e33bb2076139f85b95f8e6
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Mar 18 13:51:06 2008 -0500
+
+ FSL DDR: Convert MPC8548CDS to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit aa11d85cf318b961e029fe50d68ca47d004bce93
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Mar 17 15:48:18 2008 -0500
+
+ FSL DDR: Convert MPC8541CDS to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2b40edb10d81da7bba724edbccd7f53777112579
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Mar 18 11:12:42 2008 -0500
+
+ FSL DDR: Convert MPC8555ADS to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8b625114e8bc5a6b436181167a6e7fcd3303dd2c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Mar 18 11:12:44 2008 -0500
+
+ FSL DDR: Convert MPC8560ADS to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9617c8d49a21703eaf13a4033ab1a56eecc033cc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jun 6 13:12:18 2008 -0500
+
+ FSL DDR: Convert MPC8540ADS to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2a6c2d7ab2a66660f40a6cd3de2eb29ee29d9693
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 21:34:55 2008 -0500
+
+ FSL DDR: Add 85xx specific register setting
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6fb1b7346849ccd0c20306143e334f5b76143070
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jun 9 11:07:46 2008 -0500
+
+ FSL DDR: Add e500 TLB helper for DDR code
+
+ Provide a helper function that board code can call to map TLBs when
+ setting up DDR.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d26b739afe5a6760bd345743188759cd9d0f3b47
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Tue Aug 26 17:03:38 2008 -0500
+
+ dm9000 remove dead external phy support, gpio fix
+
+ dm9000 has code to detect and initialize external phy parts, but later
+ on in the code the part is forced to use the internal phy
+ unconditionally. Remove the unused/untested code.
+
+ change the GPIO initialization so that only the GPIO used as an
+ internal phy reset (hardwired in the chip) is set as an output. The
+ remaining GPIO need to be handled by board specific code to prevent
+ possible drive conflicts. Set as inputs for safety.
+
+ replace a few magic numbers with defines
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a1573db0c07c8ba99e9c373bb07ecd6f59da672c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Aug 26 11:17:48 2008 -0500
+
+ Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptions
+
+ cmd_net.c command descriptions were updated to describe the optional
+ hostIPaddr argument. The dhcp command help message was also updated
+ to more closely reflect the other commands in cmd_net.c
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 51dfe1382ebaf691485badfa0ea5e75b0710531b
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Aug 20 11:30:28 2008 +0200
+
+ Fix bogus error message in the DHCP handler
+
+ The DHCP handler has 1 state that is not listed in this case, causing a
+ failure message when there is actually no failure.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 61365501a0e2cae9c1df2818b7b5b3f52c450d18
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Aug 20 11:30:27 2008 +0200
+
+ Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set.
+
+ The option CONFIG_BOOTP_RANDOM_DELAY does not compile, because of a
+ missing extern inside the net/bootp.h header
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1803f7f91ff35ca402259065df7557107dcf28a2
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 21:26:32 2008 +0000
+
+ ColdFire: Add FEC Buffer descriptors in SRAM
+
+ Add FEC Buffer descriptors and data buffer in SRAM for
+ faster execution and access.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 429be27ce195210d4b9decf9e867b9ca6155a87d
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Aug 21 23:55:11 2008 +0000
+
+ Fix ColdFire FEC warning messages
+
+ Types mismatch and implicit declaration of icache_invalid()
+ warning messages
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6a002171098e968bd5b362347d2831224fab6048
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sat Jul 12 00:17:50 2008 -0700
+
+ Moved initialization of SKGE Ethernet driver to board code.
+
+ The only board using this driver is the SL8245 board.
+ Removed initialization for the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8379f42bc745eb9e4ca551a30fd2d0a63f740d75
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sat Jul 12 00:08:45 2008 -0700
+
+ Moved conditional compilation to Makefile for SK98 Ethernet driver
+
+ Brute-force removal of #ifdefs. Didn't touch the code.
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 65d3d99c28dc363d15eaee78225ff643df499b97
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Fri Jul 11 23:42:19 2008 -0700
+
+ Moved initialization of ULI526X Ethernet driver to board code.
+
+ The only board using this driver is the Freescale MPC8610HPCD board.
+ Removed initialization for the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 914947313a710f5dcf06beaf7f2aa24f1ebcce4f
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Fri Jul 11 23:15:28 2008 -0700
+
+ Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()
+
+ Added board_eth_init() function to bf537-stamp board.
+ Removed initialization for the Blackin EMAC driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit fc363ce35408f348cacced68505f3747a53e3d7c
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Jul 9 01:04:19 2008 -0700
+
+ Moved initialization of GRETH Ethernet driver to CPU directory
+
+ Added a cpu_eth_init() function to leon2/leon3 CPU directories and
+ removed code from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 86882b80771309bceb11c6accfd7f6f90ade8bfc
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Aug 26 22:16:25 2008 -0700
+
+ Moved initialization of MCFFEC Ethernet driver to CPU directory
+
+ Added a cpu_eth_init() function to coldfire CPU directories and
+ removed code from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b31da88b9c160d80d42a59cbbb31e24f27184d5c
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Aug 26 22:12:36 2008 -0700
+
+ Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory
+
+ Added a cpu_eth_init() function to cpu/mcf547x_8x directory and
+ removed code from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:38 2008 -0500
+
+ FSL DDR: Remove old SPD support from cpu/mpc86xx
+
+ All 86xx boards have been converted to the new code so we can
+ remove the old SPD DDR setup code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9bd4e5911b750837515466bc7449087698b88e0e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:37 2008 -0500
+
+ FSL DDR: Convert SBC8641D to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 39aa1a73483e1ac2bd56d5523abfc3970ee82c77
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 26 15:01:36 2008 -0500
+
+ FSL DDR: Convert MPC8610HPCD to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6a8e5692933e8e6d6e5ba7e594f49dd6d4c3a263
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:35 2008 -0500
+
+ FSL DDR: Convert MPC8641HPCN to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 46ff4f1100ea64a01d21cc008ce85ac15eb1821f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:34 2008 -0500
+
+ FSL DDR: Add 86xx specific register setting
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 233fdd502a6c227f476212b3097653ad48d7e254
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:32 2008 -0500
+
+ FSL DDR: Add DDR2 DIMM paramter support
+
+ Compute DIMM parameters based upon the SPD information.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 05c05a2363a6ac11e0e405926034546ffad71fad
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:30 2008 -0500
+
+ FSL DDR: Add DDR1 DIMM paramter support
+
+ Compute DIMM parameters based upon the SPD information in spd.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 58e5e9aff147e8c7e2bc1406bf9384f65f020ffa
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:29 2008 -0500
+
+ FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.
+
+ The main purpose of this rewrite it to be able to share the same
+ initialization code on all FSL PowerPC products that have DDR
+ controllers. (83xx, 85xx, 86xx).
+
+ The code is broken up into the following steps:
+ GET_SPD
+ COMPUTE_DIMM_PARMS
+ COMPUTE_COMMON_PARMS
+ GATHER_OPTS
+ ASSIGN_ADDRESSES
+ COMPUTE_REGS
+ PROGRAM_REGS
+
+ This allows us to share more code an easily allow for board specific code
+ overrides.
+
+ Additionally this code base adds support for >4G of DDR and provides a
+ foundation for supporting interleaving on processors with more than one
+ controller.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f784e32b4bce0013983506b11af4b85b8ca3d36e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:28 2008 -0500
+
+ FSL DDR: Provide a generic set_ddr_laws()
+
+ Provide a helper function that will setup the last available
+ LAWs (upto 2) for DDR. Useful for SPD/dyanmic DDR setting code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0f2cbe3f5eddbdf3848265f35e4f714434929cff
+Author: James Yang <James.Yang@freescale.com>
+Date: Tue Aug 26 15:01:27 2008 -0500
+
+ Add proper SPD definitions for DDR1/2/3
+
+ Also adds helper functions for DDR1/2 to verify the checksum.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 285db74716c724ae8a0ff177878fd09a74428c7b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Aug 27 01:02:48 2008 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit adf22b66d8bf05bd46e098cf71e6dca29b30aa7b
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Aug 19 10:08:49 2008 +0200
+
+ Add support for muas3001 board (MPC8270)
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 322098bff32410d2a00031649b47c4ec90a66d9a
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Tue Aug 19 08:31:18 2008 +0530
+
+ common/cmd_load.c cleanup - remove unused variables
+
+ - Remove unused global variable os_data_count.
+ - Remove unused variable z.
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit 306620b762a4f9fa6678568ad2e8772dec145208
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Mon Aug 18 13:35:27 2008 +0200
+
+ remove MVS1 board
+
+ MVS1 board has reached end-of-life and can be removed completely.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+commit 40d7e99d374ba0a0a29cd1a8ba40d3b7c2c175c7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:45 2008 -0500
+
+ bootm: refactor do_reset and os boot function args
+
+ There is no need for each OS specific function to call do_reset() we
+ can just do it once in bootm. This means its feasible on an error for
+ the OS boot function to return.
+
+ Also, remove passing in cmd_tbl_t as its not needed by the OS boot
+ functions. flag isn't currently used but might be in the future so
+ we left it alone.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 40afac22a9c602e55c501c800f1c064324711b56
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:44 2008 -0500
+
+ fdt: Added resize command
+
+ Resize the fdt to size + padding to 4k boundary
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2a1a2cb6e2b87ee550e6f27b647d23331dfd5e1b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:43 2008 -0500
+
+ fdt: refactor initrd related code
+
+ Created a new fdt_initrd() to deal with setting the initrd properties
+ in the device tree and fixing up the mem reserve. We can use this
+ both in the choosen node handling and lets us remove some duplicated
+ code when we fixup the initrd info in bootm on PPC.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3082d2348c8e13342f5fdd10e9b3f7408062dbf9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:42 2008 -0500
+
+ fdt: refactor fdt resize code
+
+ Move the fdt resizing code out of ppc specific boot code and into
+ common fdt support code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 396f635b8ff3ccbc38d75d5eda98444c6466810a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:41 2008 -0500
+
+ bootm: refactor image detection and os load steps
+
+ Created a bootm_start() that handles the parsing and detection of all
+ the images that will be used by the bootm command (OS, ramdisk, fdt).
+ As part of this we now tract all the relevant image offsets in the
+ bootm_headers_t struct. This will allow us to have all the needed
+ state for future sub-commands and lets us reduce a bit of arch
+ specific code on SPARC.
+
+ Created a bootm_load_os() that deals with decompression and loading
+ the OS image.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e906cfae08e8cc2447f59b1bc4c22ab9c3c286d2
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:40 2008 -0500
+
+ bootm: move lmb into the bootm_headers_t structure
+
+ To allow for persistent state between future bootm subcommands we
+ need the lmb to exist in a global state.
+ Moving it into the bootm_headers_t allows us to do that.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 54f9c86691309b2f919f567f9255b8bcad2c7651
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:39 2008 -0500
+
+ bootm: Set working fdt address as part of the bootm flow
+
+ Set the fdt working address so "fdt FOO" commands can be used as part
+ of the bootm flow. Also set an the environment variable "fdtaddr"
+ with the value.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 06a09918f3903450313e2047a9cc258bf5872f46
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:38 2008 -0500
+
+ bootm: refactor fdt locating and relocation code
+
+ Move the code that handles finding a device tree blob and relocating
+ it (if needed) into common code so all arch's have access to it.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c4f9419c6b54958e0eddbcbc9e5a4a7b7ec99865
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:37 2008 -0500
+
+ bootm: refactor ramdisk locating code
+
+ Move determing if we have a ramdisk and where its located into the
+ common code. Keep track of the ramdisk start and end in the
+ bootm_headers_t image struct.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c160a9544743e80e8889edb2275538e7764ce334
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:36 2008 -0500
+
+ bootm: refactor entry point code
+
+ Move entry point code out of each arch and into common code.
+ Keep the entry point in the bootm_headers_t images struct.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 20220d22b9f41446288588cd2e457e0077a18bed
+Author: Randy Vinson <rvinson@mvista.com>
+Date: Wed Aug 13 11:44:57 2008 -0700
+
+ mpc7448hpc2: Fix PCI I/O space mapping.
+
+ PCI I/O space is currently mapped 1:1 at 0xFA000000. Linux requires
+ PCI I/O space to start at 0 on the PCI bus. This patch maps PCI I/O
+ space such that 0xFA000000 in the processor's address space maps to 0
+ on the PCI I/O bus.
+
+ Signed-off-by Randy Vinson <rvinson@mvista.com>
+ Acked-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit b4e07520bbb5467ad72eb92a5c9177d2797b9e30
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Wed Aug 13 18:10:26 2008 +0200
+
+ i.MX31: Specify maintainers for i.MX31-based boards
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 51e46e28fda4bbdf5149ac7f67d62fcc8df4da63
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 26 15:01:28 2008 +0200
+
+ ADS5121: adjust image addresses in RAM and flash
+
+ Use the same mapping in flash as used by Linux
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 19f101412c16edee9fd55db4039e1d68a833b28b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 26 13:14:34 2008 +0200
+
+ cmd_mem.c: Fix help message alignment
+
+ Bug was introced by "Big white-space cleanup" (53677ef1)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1a9eeb78b825bfade31d7606a2fe3b9eca9e35be
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Wed Aug 20 11:11:52 2008 +0200
+
+ change mvBL-M7 default env and move to vendor subdir
+
+ fix mvBL-M7 config and move to matrix_vision subdir
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 002d27caf26e7eb913d474d3a91f67d56c8c31d5
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Fri Aug 22 23:52:40 2008 -0700
+
+ MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family devices
+
+ This patch adds elements to the 83xx sysconf structure and #define values that are used
+ by mpc83xx family devices.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 447ad5768abda669ac0e7f46fcdb62fbe828d637
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+Date: Fri Aug 22 11:00:15 2008 -0700
+
+ MPC8349EMDS: Add PCI Agent (PCISLAVE) support
+
+ Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a
+ PCI card rather than a host computer.
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 4ff9aea9d6b5602683a920951ef896996438af62
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+Date: Fri Aug 22 11:00:14 2008 -0700
+
+ mpc83xx: add PCISLAVE support to 83XX_GENERIC_PCI setup code
+
+ This adds a helper function to unlock the PCI configuration bit, so that
+ any extra PCI setup (such as outbound windows, etc.) can be done after
+ using the 83XX_GENERIC_PCI code to set up the PCI bus.
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 162338e1fcde231ca4d562e5ebd7859456731691
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+Date: Fri Aug 22 11:00:13 2008 -0700
+
+ MPC8349EMDS: use 83XX_GENERIC_PCI setup code
+
+ Change the MPC8349EMDS board to use the generic PCI initialization code
+ for the mpc83xx cpu.
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit f4e55a4941e8ba46bc06020b2747928adf8fdee7
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Aug 25 14:53:09 2008 -0500
+
+ fix out of tree building
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a49d10cf027d059ee15c262010a05cdaec0961e1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 25 23:45:41 2008 +0200
+
+ Minor coding style cleanup, updte CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4d56e8dea670757c801a6a65531f02a8f981ce1f
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Aug 20 20:29:38 2008 +0200
+
+ RTC: Fix Makefile problem with COBJS-$(CONFIG_RTC_DS1307 || CONFIG_RTC_DS1338)
+
+ This "||" doesn't seem to work. Now using the idea suggest by Scott Wood
+ to combine both config options into one line. This even allows defining
+ both options and not generating the target object twice.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 079edb913dbae147b50a488cf02e03f473fc5f28
+Author: Jens Gehrlein <sew_s@tqs.de>
+Date: Fri Jul 4 16:50:05 2008 +0200
+
+ MX31: fix bit masks in function mx31_decode_pll()
+
+ Bits MPCTL[MFN] and MPCTL[MFD] were not fully covered.
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+
+commit e8f1207bbf2df6fb693ee1aa3329b2014c92e5e6
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Mon Aug 25 11:11:34 2008 +0200
+
+ Correct ARM Versatile Timer Initialization
+
+ - According to ARM Dual-Timer Module (SP804) TRM (ARM DDI0271),
+ -- Timer Value Register @ TIMER Base + 4 is Read-only.
+ -- Prescale Value (Bits 3-2 of TIMER Control register)
+ can only be one of 00,01,10. 11 is undefined.
+ -- CFG_HZ for Versatile board is set to
+ #define CFG_HZ (1000000 / 256)
+ So Prescale bits is set to indicate
+ - 8 Stages of Prescale, Clock divided by 256
+ - The Timer Control Register has one Undefined/Shouldn't Use Bit
+ So we should do read/modify/write Operation
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit 535cfa4f3de86cf48d6c0af1daf33aebdca089f9
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Mon Aug 25 11:30:29 2008 +0200
+
+ Add ARM AMBA PL031 RTC Support
+
+ Signed-off-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+
+commit e39411674669cc880e1ec4a8ca4794fb15c33a45
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Aug 19 16:21:03 2008 -0400
+
+ ARM DaVinci: Removed redundant NAND initialization code.
+
+ ARM DaVinci: Removed redundant NAND initialization code.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit b3fb663b20d995ca41327db877ddb168279b3f62
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Aug 19 16:21:00 2008 -0400
+
+ ARM DaVinci: Fix compilation error with new MTD code.
+
+ ARM DaVinci: Fix compilation error with new MTD code.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 109c30fb8edea1a15d37a6ce787cd5faf33d8e43
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Aug 22 14:37:05 2008 -0400
+
+ Add note on dereferencing /aliases pointers
+
+ Replace the "must quote special characters" note with a hint on
+ how to dereference /aliases pointers by omitting the leading "/".
+ This feature was introduced by Kumar Gala as a libfdt enhancement
+ in commit ed035708235332c3c117ee3bb1a426063f03cfcb.
+
+ Example:
+
+ => fdt print /aliases
+ aliases {
+ ethernet0 = "/qe@e0100000/ucc@2000";
+ ethernet1 = "/qe@e0100000/ucc@3000";
+ serial0 = "/soc8360@e0000000/serial@4500";
+ serial1 = "/soc8360@e0000000/serial@4600";
+ pci0 = "/pci@e0008500";
+ };
+ => fdt print ethernet0
+ ucc@2000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <0x1>;
+ reg = <0x2000 0x200>;
+ interrupts = <0x20>;
+ interrupt-parent = <0x2>;
+ local-mac-address = [00 00 00 00 00 00];
+ rx-clock-name = "none";
+ tx-clock-name = "clk9";
+ phy-handle = <0x3>;
+ phy-connection-type = "rgmii-id";
+ pio-handle = <0x4>;
+ };
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit feeca3f578b7f53c032ba203698751c982f8bf5a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Aug 14 08:28:19 2008 -0500
+
+ libfdt: Add support for using aliases in fdt_path_offset()
+
+ If the path doesn't start with '/' check to see if it matches some alias
+ under "/aliases" and substitute the matching alias value in the path
+ and retry the lookup.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: David Gibson <david@gibson.dropbear.id.au>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 0219399a4e3a8edb428e1924e1a03d58cccf8d8e
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Wed Aug 6 14:50:49 2008 +1000
+
+ libfdt: Implement fdt_get_property_namelen() and fdt_getprop_namelen()
+
+ As well as fdt_subnode_offset(), libfdt includes an
+ fdt_subnode_offset_namelen() function that takes the subnode name to
+ look up not as a NUL-terminated string, but as a string with an
+ explicit length. This can be useful when the caller has the name as
+ part of a longer string, such as a full path.
+
+ However, we don't have corresponding 'namelen' versions for
+ fdt_get_property() and fdt_getprop(). There are less obvious use
+ cases for these variants on property names, but there are
+ circumstances where they can be useful e.g. looking up property names
+ which need to be parsed from a longer string buffer such as user input
+ or a configuration file, or looking up an alias in a path with
+ IEEE1275 style aliases.
+
+ So, since it's very easy to implement such variants, this patch does
+ so. The original NUL-terminated variants are, of course, implemented
+ in terms of the namelen versions.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit f171746f701ea58bf6a53e835b53d2aaebee0d81
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Tue Jul 29 14:51:22 2008 +1000
+
+ libfdt: Forgot one function when cleaning the namespace
+
+ In commit b6d80a20fc293f3b995c3ce1a6744a5574192125, we renamed all
+ libfdt functions to be prefixed with fdt_ or _fdt_ to minimise the
+ chance of collisions with things from whatever package libfdt is
+ embedded in, pulled into the libfdt build via that environment's
+ libfdt_env.h.
+
+ Except... I missed one. This patch applies the same treatment to
+ _stringlist_contains(). While we're at it, also make it static since
+ it's only used in the same file.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 46390da15411351fc3b498bd8c1615f78fe80df0
+Author: Wolfram Sang <w.sang@pengutronix.de>
+Date: Wed Jul 9 11:22:44 2008 +0200
+
+ libfdt: Improve documentation in libfdt.h
+
+ Fix a few typos and mistakes.
+
+ Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
+ Acked-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit fc7758ee4f5782878f2e96876b7bc56cfee0ac66
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Wed Jul 9 14:10:24 2008 +1000
+
+ libfdt: Increase namespace-pollution paranoia
+
+ libfdt is supposed to easy to embed in projects all and sundry.
+ Often, it won't be practical to separate the embedded libfdt's
+ namespace from that of the surrounding project. Which means there can
+ be namespace conflicts between even libfdt's internal/static functions
+ and functions or macros coming from the surrounding project's headers
+ via libfdt_env.h.
+
+ This patch, therefore, renames a bunch of libfdt internal functions
+ and macros and makes a few other chances to reduce the chances of
+ namespace collisions with embedding projects. Specifically:
+ - Internal functions (even static ones) are now named _fdt_*()
+
+ - The type and (static) global for the error table in
+ fdt_strerror() gain an fdt_ prefix
+
+ - The unused macro PALIGN is removed
+
+ - The memeq and streq macros are removed and open-coded in the
+ users (they were only used once each)
+
+ - Other macros gain an FDT_ prefix
+
+ - To save some of the bulk from the previous change, an
+ FDT_TAGALIGN() macro is introduced, where FDT_TAGALIGN(x) ==
+ FDT_ALIGN(x, FDT_TAGSIZE)
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit c66830263af19831f2b7db307f79d1943febf7f9
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Jul 7 10:14:15 2008 +1000
+
+ dtc: Enable and fix -Wcast-qual warnings
+
+ Enabling -Wcast-qual warnings in dtc shows up a number of places where
+ we are incorrectly discarding a const qualification. There are also
+ some places where we are intentionally discarding the 'const', and we
+ need an ugly cast through uintptr_t to suppress the warning. However,
+ most of these are pretty well isolated with the *_w() functions. So
+ in the interests of maximum safety with const qualifications, this
+ patch enables the warnings and fixes the existing complaints.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit ef4e8ce1beb5b93aedda5a4c1b90bfd989c6791e
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Jul 7 10:10:48 2008 +1000
+
+ dtc: Enable and fix -Wpointer-arith warnings
+
+ This patch turns on the -Wpointer-arith option in the dtc Makefile,
+ and fixes the resulting warnings due to using (void *) in pointer
+ arithmetic. While convenient, pointer arithmetic on void * is not
+ portable, so it's better that we avoid it, particularly in libfdt.
+
+ Also add necessary definition of uintptr_t needed by David Gibson's
+ changeset "dtc: Enable and fix -Wpointer-arith warnings" (the definition
+ comes from stdint.h, which u-boot doesn't have). -- gvb
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 5d4b3d2b31e58fcb2d4bd10af762f5ff41b229fd
+Author: Tirumala R Marri <tmarri@amcc.com>
+Date: Thu Aug 21 21:54:53 2008 -0700
+
+ ppc4xx: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix
+
+ During recent PCI-E tests it has been found that current
+ driverl level and de-emphasis values are not set correctly.
+ After sweeping throgh all de-ephasis values, it was found that
+ 0x130 is a right value. Where 0x13 is driver level and 0 is
+ de-emphasis.
+
+ Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0bb86d823b6c150c7ee17de0cfca9ffccc16463b
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Aug 20 20:46:56 2008 +0200
+
+ Make the YAFFS filesystem work
+
+ Recently the YAFFS filesystem support has been added to U-boot.
+ However, just enabling CONFIG_YAFFS2 is not enough to get it working.
+
+ ymount will generate an exception (when dereferencing mtd->readoob()), because
+ the genericDevice is a null pointer. Further, a lot of logging is produced
+ while using YAFFS fs, so logging should also be disabled.
+ Both issues are solved by this patch.
+
+ With this patch and CONFIG_YAFFS2 enabled, I get a readable filesystem
+ in U-boot, as well as in Linux.
+
+ Tested on a Atmel AT91SAM9261EK board.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Acked-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit bfd7f38614e21f745b6d6845fcc616ebc5e4d36f
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Aug 19 08:42:53 2008 +0900
+
+ Fix OneNAND read_oob/write_oob functions compatability
+
+ Also sync with kernel OneNAND codes
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 8d765456c1d33f2010d2717ee58de7647fdc6346
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Aug 18 17:11:20 2008 -0500
+
+ NAND: Remove delay from nand_boot_fsl_elbc.c.
+
+ It was for debugging purposes, and shouldn't have been left in.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit f556483734126793522fb7a8cf36af90da78f084
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Aug 21 11:05:03 2008 +0200
+
+ ppc4xx: Cleanup of "ppc4xx: Optimize PLB4 Arbiter..." patch
+
+ This patch fixes some minor issues introduced with the patch:
+ ppc4xx: Optimize PLB4 Arbiter... from Prodyut Hazarika:
+
+ - Rework memory-queue and PLB arbiter optimization code, that the
+ local variable is not needed anymore. This removes one #ifdef.
+ - Use consistant spacing in ppc4xx.h header (XXX + 0x01 instead
+ of XXX+ 0x01). This was not introduced by Prodyut, just a
+ copy-paste problem.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 079589bcfb24ba11068460276a3cc9549ab5346f
+Author: Prodyut Hazarika <phazarika@amcc.com>
+Date: Wed Aug 20 09:38:51 2008 -0700
+
+ ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe,
+ PPC405EX and PPC460EX/GT/SX
+
+ - Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX
+ processors
+ - Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared
+ across processors (405 and 440/460)
+ - Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX
+ processors
+ - Add register bit definitions for Memory Queue Configuration registers
+
+ Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ba37aa03287c5483c61c0a3e320c8888bee0143a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 19 15:41:18 2008 -0500
+
+ fdt: rework fdt_fixup_ethernet() to use env instead of bd_t
+
+ Move to using the environment variables 'ethaddr', 'eth1addr', etc..
+ instead of bd->bi_enetaddr, bi_enet1addr, etc.
+
+ This makes the code a bit more flexible to the number of ethernet
+ interfaces.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4cacf7c64609839f809e2f9c45873f1d65861703
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 19 14:57:55 2008 +0200
+
+ hush: Fix printf debug macro in hush.c so that it usable in U-Boot
+
+ This patch changes the debug_printf() marco for U-Boot in hush.c and
+ moves the definition of DEBUG_SHELL to a place that is actually compiled
+ under U-Boot.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8f2b457ef26a44d9e5fd7d6b16c394e5c3a71ca2
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Aug 19 09:57:41 2008 +0200
+
+ cfi: rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
+
+ Commit 00b1883a4cac59d97cd297b1a3a398db85982865
+ missed a few boards:
+ include/configs/M5253DEMO.h
+ include/configs/ml507.h
+ include/configs/redwood.h
+
+ This patch fixes this.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 0768b7a872964085eece8d5e9fec9175e9deb161
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon Aug 18 13:41:27 2008 +0200
+
+ Consolidate strmhz() implementation
+
+ ARM, i386, m68k and ppc all have identical implementations of strmhz().
+ Other architectures don't provide this function at all.
+
+ This patch moves strmhz() into lib_generic, reducing code duplication
+ and providing a more unified API across architectures.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a928d0df211f1d829308d335d19be3ca42558dfc
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Mon Aug 18 12:02:51 2008 +0200
+
+ fix mvbc_p board build warnings
+
+ fix build warnings @ mvBC-P board by using correct types, i.e. change
+ out_be32 to out_be16 and out_8 accordingly.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+commit a958b663d27f616bd1dfb720d1b476d1ecaaa569
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 16 18:54:27 2008 +0200
+
+ Makefile: fix posix support on find
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bef92e215d945cc574399c1a1b00a3a76d35aa03
+Author: Axel Beierlein <belatronix@web.de>
+Date: Sat Aug 16 00:30:48 2008 +0200
+
+ Adding bootlimit/bootcount feature for MPC5XXX on TQM5200 Boards
+
+ Tested with TQM5200S on STK52XX.200 Board
+
+ Signed-off-by: Axel Beierlein <belatronix@web.de>
+
+commit 0800707b6d5041a840a65d556032c15c584b55f8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Aug 15 14:36:32 2008 -0500
+
+ mod_i2c_mem() bugfix
+
+ The last used chip, address, and address length were not being
+ stored for the imm and imn commands.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 4afbef967275b2f636abae86f91b81becee7ad03
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Fri Aug 15 15:37:31 2008 -0400
+
+ Fix typo in spelling of ATAPI.
+
+ Correct a small spelling mistake.
+
+ Signed-off-by: Steven A. Falco <sfalco@harris.com>
+
+commit 36c2d3062ecc6ab85f8e237180eb134464c48418
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Fri Aug 15 15:34:10 2008 -0400
+
+ Add a hook to allow board-specific PIO mode setting.
+
+ This patch adds a hook whereby a board-specific routine can be called to
+ configure hardware for a PIO mode. The prototype for the board-specific
+ routine is:
+
+ int inline ide_set_piomode(int pio_mode)
+
+ ide_set_piomode should be prepared to configure hardware for a pio_mode
+ between 0 and 6, inclusive. It should return 0 on success or 1 on failure.
+
+ Signed-off-by: Steven A. Falco <sfalco@harris.com>
+
+commit 9571b84cb1423876f1153081b9e6a51d90fbcdc4
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Fri Aug 15 15:29:12 2008 -0400
+
+ Replace enums in ata.h with an include of libata.h
+
+ This patch removes some enums from ata.h and replaces them with an
+ include of libata.h. This way, we eliminate duplicated code, and
+ prevent errors whereby the different versions could be out of sync.
+
+ Signed-off-by: Steven A. Falco <sfalco@harris.com>
+
+commit 0de0afbca865ecf482b4d2b635236746def8518f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 15 18:32:41 2008 +0200
+
+ coldfire: fix CFI drivers activation with new macro
+
+ rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7dbc38ad915f4ae67f4cd1818b7ac8fed368aaa9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:35 2008 -0500
+
+ fdt: fdt addr w/o any args reports back the current working address
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f953d99fd528a496b400a706b511eaf8e3ea66af
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:34 2008 -0500
+
+ fdt: added the ability to set initrd start/end via chosen command
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ffa4bafacaef67058463b3d7d0099ced57569dd2
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:33 2008 -0500
+
+ Add command to enable/disable interrupts
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9e8e63cce69556aef10b58bcbc56d324f570ec3a
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Tue Aug 19 22:21:16 2008 -0700
+
+ CFI: Add CFI_CMDSET_INTEL_EXTENDED to fix flash_real_protect()
+
+ This patch fixes a missing vendor code in the flash_real_protect() function.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4e00acded2e6a8d663e12690a0f0f08f5bec5a58
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 16:53:39 2008 +0000
+
+ CFI: Fix AMD Legacy sector protect
+
+ New implement sector lock and unlock or softlock commands
+ do not exist in AMD legacy flash. Thus, causing issue
+ when erasing AMD legacy flash (such as lv040)
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 492671404140f09d5b21b3d2ce4e362c0692c069
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Aug 20 09:40:16 2008 +0200
+
+ hammerhead/mimc200: Use CONFIG_FLASH_CFI_DRIVER
+
+ CFG_FLASH_CFI_DRIVER was recently renamed CONFIG_FLASH_CFI_DRIVER.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 33eac2b3d946fc998a09245dfe54d017079b9056
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Aug 20 09:28:36 2008 +0200
+
+ hammerhead: Add missing printf parameter to CONFIG_AUTOBOOT_PROMPT
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 25da0b84195fdda89a943b2d25757db5afeef5b8
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Aug 20 09:27:37 2008 +0200
+
+ favr-32-ezkit: Fix printf format warnings
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 462da25e89b0b58bf4c66346c1fcb3087c61b4b8
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri Aug 15 12:04:25 2008 +0200
+
+ MAINTAINERS: Sort avr32 section alphabetically
+
+ The rest of the MAINTAINERS file appears to be sorted
+ almost-alphabetically, but entries for the newly added AVR32 boards were
+ added somewhat randomly. This patch sorts the list alphabetically again.
+
+ Also update my e-mail address. The old one still works, but it may not
+ work forever.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 13b50fe3bc065c48911fa373231421280855a9d6
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Wed Jul 30 13:07:27 2008 +0100
+
+ avr32: Add MIMC200 board
+
+ The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
+ 8MByte FLASH and 128KByte FRAM.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit db70b84329315c52f6ec77f5ae5ca1afe970a9bb
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Jul 9 21:07:34 2008 +0900
+
+ rtl8169: add support for RTL8110SCL
+
+ This patch fixes a problem that RTL8110SCL started transfer
+ with an incorrect memory address.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 943b825bf15e6a28ac8328e0f6489478bceef1ea
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 25 15:48:52 2008 -0500
+
+ Fix dm9000 receive status and len little endian issue
+
+ The received status and len was in little endian
+ format and caused the ethernet unable to proceed
+ further. Add __le16_to_cpu() in dm9000_rx_status_8/16/32bit().
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit fcd69a1a57fb2af4d26201422095a4be9f36963e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:32 2008 -0500
+
+ Clean up usage of icache_disable/dcache_disable
+
+ There is no point in disabling the icache on 7xx/74xx/86xx parts and not
+ also flushing the icache. All callers of invalidate_l1_instruction_cache()
+ call icache_disable() right after. Make it so icache_disable() calls
+ invalidate_l1_instruction_cache() for us.
+
+ Also, dcache_disable() already calls dcache_flush() so there is no point
+ in the explicit calls of dcache_flush().
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a15b07104ca7bbb7093c9009c9ae1b58b4202d13
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:31 2008 -0500
+
+ Update linux bootm to support ePAPR client interface
+
+ The ePAPR spec has some subtle differences from the current device
+ tree based boot interface to the powerpc linux kernel. The powerpc
+ linux kernel currently ignores the differences that ePAPR specifies.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b734e5556a239b3be5f9693b2f4b4b739683ec16
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 18 23:50:20 2008 +0200
+
+ Minor code cleanup: keep lists sorted.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d0039d4ed275e6ca09fb417895024ad02be118c4
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Jul 23 19:10:14 2008 +0200
+
+ Add support for ADT7460 I2C monitor chip
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit eb59ea45ab77c14b090ea857d9ea9f902f40db0b
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jul 14 19:45:45 2008 +0200
+
+ video: Clean drivers/video/Makefile
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 871c18dd301752270e1f74328c846c3104be1e2e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jul 14 19:45:37 2008 +0200
+
+ rtc: Clean drivers/rtc/Makefile
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit a4a549b4b53adf40a0d3882cc30ac812a8f847c5
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jul 14 19:45:35 2008 +0200
+
+ i2c: Clean drivers/i2c/ Makefile
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 0a823aa2a8a8c0685e73900f387d602d7edafc0e
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Jul 9 22:30:30 2008 +0800
+
+ Add 'license' command to U-Boot command line
+
+ The 'license' command includes the U-Boot license (GPLv2) into the
+ actual bootloader binary. The license text can be shown interactively
+ at the U-Boot commandline.
+
+ For products where the commandline can actually be accessed by the
+ end user, this helps to prevent inadvertent GPL violations, since the
+ GPLv2 license text can no longer be 'forgotten' to be included into
+ the product.
+
+ The 'license' command can be enabled by CONFIG_CMD_LICENSE.
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit fe2ce5500ebf43d79d227190bd2370232d5b113d
+Author: Harald Welte <laforge@gnumonks.org>
+Date: Sun Jul 6 15:56:38 2008 +0800
+
+ add 'unzip' command to u-boot commandline
+
+ [PATCH] add new 'unzip' command to u-boot commandline
+
+ common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from
+ memory to memory, and option CONFIG_CMD_UNZIP to enable it
+
+ Signed-off-by: Werner Almesberger <werner@openmoko.org>
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit 07efc9e321619c3dec213310c32e011aa6f02783
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 6 19:37:17 2008 -0500
+
+ Change CFG_ENV_SIZE to CFG_ENV_SECT_SIZE for SPI sector erase
+
+ The CFG_ENV_SIZE is not suitable used for SPI flash erase
+ sector size if CFG_ENV_SIZE is less than CFG_ENV_SECT_SIZE.
+ Add condition check if CFG_ENV_SIZE is larger than
+ CFG_ENV_SECT_SIZE, calculate the right number of sectors for
+ erasing.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 4cb4e654cafabaa1ac180d37b00c8f6095dae9c9
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Aug 11 15:54:25 2008 +0000
+
+ ColdFire: Multiple fixes for M5282EVB
+
+ Incorrect CFG_HZ value, change 1000000 to 1000.
+ Rename #waring to #warning. RAMBAR1 uses twice
+ in start.S, rename the later to FLASHBAR. Insert
+ nop for DRAM setup. And, env_offset in linker file.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 10db3a17a278dd3a27668b31cb32cdd1476e9513
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Aug 11 15:26:43 2008 +0000
+
+ ColdFire: Move m5282evb from board to board/freescale
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 56df091d391f74bbf2dc2f7931f9f3c8f23529e4
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Aug 11 15:25:07 2008 +0000
+
+ ColdFire: Move m5272c3 from board to board/freescale
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 659e9bad629a480f606b286d5703aef7159edf98
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Aug 11 15:23:16 2008 +0000
+
+ ColdFire: Move m5271evb from board to board/freescale
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 05316f8ece8206339a208ec052f039cd0f7ca922
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Aug 11 13:41:49 2008 +0000
+
+ ColdFire: Add M54451EVB platform support for MCF5445x
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 922cd7515597e9a2c07d68e2a6240b0b7b0f0136
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 6 19:14:08 2008 -0500
+
+ ColdFire: Add Serial Flash support for M54455EVB
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 9f751551456828b2d0ff417f10959fb0c7110bd0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 23 20:38:53 2008 -0500
+
+ ColdFire: Implement SBF feature for M5445EVB
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit a7323bba229203aae2604afde131ab47bad4eadc
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 23 17:53:36 2008 -0500
+
+ ColdFire: Add SSPI feature for MCF5445x
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit b2d022d1ac3f59bffa9cec249341e77aea168abc
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 23 17:37:10 2008 -0500
+
+ ColdFire: Use CFI Flash driver for M54455EVB
+
+ Remove non-common flash driver in
+ board/freescale/m54455evb/flash.c. The non-cfi flash will
+ use CONFIG_FLASH_CFI_LEGACY to configure the flash
+ attribute.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 6d33c6acfa35b1144d46ffbff7e29ee7969290d0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 23 17:11:47 2008 -0500
+
+ ColdFire: Add M5253DEMO platform support for MCF5253
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 80ba61fd82569af40e04d4a089257b81881884f2
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 6 14:17:09 2008 -0500
+
+ ColdFire: Raise M5253EVBE uart baudrate to 115200 bps
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit d361307e73ce1f6fc68760123f37d4876f851f3e
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 6 14:11:36 2008 -0500
+
+ ColdFire: Fix M5253EVB dram bring up issue
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 4b0708093e15b412296328bf81325cf9b69fe512
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 14 14:41:06 2008 +0200
+
+ Coding Style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 68cf19aae48f2969ec70669604d0d776f02c8bc4
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Aug 13 18:24:05 2008 -0500
+
+ socrates: Update NAND driver to new API.
+
+ Also, fix some minor formatting issues, and simplify the handling of
+ "state" for writes.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit ba22d10f39eaeedd035e8265616e31ff88e314d5
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Aug 13 18:03:40 2008 -0500
+
+ quad100hd: Update NAND driver to new API.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit f64cb652a8a84c5c34d0afcbd7ffef886aa1d838
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Aug 13 17:53:48 2008 -0500
+
+ m5373evb: Update NAND driver to new API.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 1a23a197c8722b805f40895544bbdb1a648c1c82
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Aug 13 17:04:30 2008 -0500
+
+ s3c24x0: Update NAND driver to new API.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit aa5f75f20db8a7103fad9c34d6f1193e10d1890f
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Aug 13 15:56:00 2008 -0500
+
+ at91: Update board NAND drivers to current API.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit d438d50848e9425286e5fb0493e0affb5a0b1e1b
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Wed Aug 13 09:11:02 2008 +0900
+
+ Fix OneNAND build break
+
+ Since page size field is changed from oobblock to writesize. But OneNAND is not updated.
+ - fix bufferram management at erase operation
+ This patch includes the NAND/OneNAND state filed too.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 9483df6408c25f16060432de3868901e352e23bc
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:43 2008 +0200
+
+ drivers/mtd/nand_legacy: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit cc4a0ceeac5462106172d0cc9d9d542233aa3ab2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:43 2008 +0200
+
+ drivers/mtd/nand: Move conditional compilation to Makefile
+
+ rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4fb09b81920e5dfdfc4576883186733f0bd6059c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:42 2008 +0200
+
+ drivers/mtd/onenand: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 00b1883a4cac59d97cd297b1a3a398db85982865
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:42 2008 +0200
+
+ drivers/mtd: Move conditional compilation to Makefile
+
+ rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7ba44a5521cdb7fa1c72864025cde1e21a6f6921
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:41 2008 +0200
+
+ drivers/qe: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ab6878c7bc68a7b5e5b731655bdc13221bbfc493
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:40 2008 +0200
+
+ drivers/pci: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 55d6d2d39fe3fe87802e399aa17539368b495d2e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:40 2008 +0200
+
+ drivers/misc: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 65e41ea0548b86e3d7892defac8e4dc1ea70aed1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:40 2008 +0200
+
+ drivers/input: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 88f57e093114a44aa9a858d52b099bcc52034a8c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:39 2008 +0200
+
+ drivers/dma: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1a02806c4b1b4a09ad4e95d3aac3783889e5f8d7
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:39 2008 +0200
+
+ drivers/block: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1a6ffbfaf4353bec379ed1fcfc54b6f1a30af09a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:39 2008 +0200
+
+ serial: move CFG_NS9750_UART to CONFIG_NS9750_UART
+
+ move also conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6c58a030f86829fa4f0d4337cf4b794c41a1823e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:38 2008 +0200
+
+ serial: move CFG_SCIF_CONSOLE to CONFIG_SCIF_CONSOLE
+
+ move also conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d6e9ee92e890f67594ab150689510df361133ead
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:38 2008 +0200
+
+ common: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f5acb9fd9bba1160de3ef349c7d33fe510eda286
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:09 2008 +0200
+
+ mx31: move freescale's mx31 boards to vendor board dir
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8ed2f5f950e2581214d20b011a8f27a6396d65d2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jul 5 23:11:11 2008 +0200
+
+ at91: move arch-at91sam9 to arch-at91
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 195ccfc5991d48764b2519941e3507f693851d5d
+Author: Fathi BOUDRA <fabo@debian.org>
+Date: Wed Aug 6 10:06:20 2008 +0200
+
+ OneNAND: Fill in MTD function pointers for OneNAND.
+
+ onenand_print_device_info():
+ - Now returns a string to be placed in mtd->name,
+ rather than calling printf.
+ - Remove verbose parameter as it becomes useless.
+
+ Signed-off-by: Fathi Boudra <fabo@debian.org>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit aa646643b6bc250cb3a4966bf728876e0c10d329
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Wed Aug 6 21:42:07 2008 +0200
+
+ nand_spl: Support page-aligned read in nand_load, use chipselect
+
+ Supporting page-aligned reads doesn't incure any sinificant overhead, just
+ a small change in the algorithm. Also replace in_8 with readb, since there
+ is no in_8 on ARM.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 4f32d7760a58fe73981b6edc0b0751565d2daa4c
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Aug 5 11:15:59 2008 -0500
+
+ NAND boot: Update large page support for current API.
+
+ Also, remove the ctrl variable in favor of passing the constants
+ directly, and remove redundant (u8) casts.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit e4c09508545d1c45617ba45391c03c03cbc360b9
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Jun 30 14:13:28 2008 -0500
+
+ NAND boot: MPC8313ERDB support
+
+ Note that with older board revisions, NAND boot may only work after a
+ power-on reset, and not after a warm reset. I don't have a newer board
+ to test on; if you have a board with a 33MHz crystal, please let me know
+ if it works after a warm reset.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit acdab5c33f1ea6f5e08f06f08bc64af23ff40d71
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Jun 26 14:06:52 2008 -0500
+
+ mpc8313erdb: Enable NAND in config.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c3db8c649c6ab3da2f1411c4c6d61aecea054aa4
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Jul 31 12:38:26 2008 +0200
+
+ NAND: Do not write or read a whole block if it is larger than the environment
+
+ Environment can be smaller than NAND block size, do not need to read a whole
+ block and minimum for writing is one page. Also remove an unused variable.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit eafcabd15f00c142156235c519fcc55b10993241
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Sun Jun 22 16:30:06 2008 +0200
+
+ NAND: chip->state does not always get set.
+
+ Fixes an issue with chip->state not always being set causing troubles.
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 13f0fd94e3cae6f8a0d9fba5d367e311edc8ebde
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Mon Jun 30 15:34:40 2008 +0200
+
+ NAND: Scan bad blocks lazily.
+
+ Rather than scanning on boot, scan upon the first attempt to check the
+ badness of a block. This speeds up boot when not using NAND, and reduces
+ the likelihood of needing to reflash via JTAG if NAND becomes
+ nonfunctional.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit dfbf617ff055e4216f78d358b0867c548916d14b
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Jun 12 13:20:16 2008 -0500
+
+ NAND read/write fix
+
+ Implement block-skipping read/write, based on a patch from
+ Morten Ebbell Hestens <morten.hestnes@tandberg.com>.
+
+ Signed-off-by: Morten Ebbell Hestnes <morten.hestnes@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 984e03cdf1431bb593aeaa1b74c445d616f955d3
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Jun 12 13:13:23 2008 -0500
+
+ NAND: Always skip blocks on read/write/boot.
+
+ Use of the non-skipping versions was almost always (if not always)
+ an error, and no valid use case has been identified.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit e1c3dbada349992875934575c97b328ab2cb33ca
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Jun 12 11:10:21 2008 -0500
+
+ nand: fsl_upm: convert to updated MTD NAND infrastructure
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 300253306acc72b1b2e9faf0987f86551151d7cf
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu May 22 15:02:46 2008 -0500
+
+ fsl_elbc_nand: Hard-code the FBAR/FPAR split.
+
+ The hardware has separate registers for block and page-within-block,
+ but the division between the two has no apparent relation to the
+ actual erase block size of the NAND chip.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 9c814b0a716aae884bec977b9a032dfa59cfb79a
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Mar 28 22:10:54 2008 +0300
+
+ fsl_elbc_nand: workaround for hangs during nand write
+
+ Using current driver elbc sometimes hangs during nand write. Reading back
+ last byte helps though (thanks to Scott Wood for the idea).
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 9fd020d6b4b36b9fb67cd834bc1ae7fdba15ee9e
+Author: Scott Wood <scottwood@freescale.com>
+Date: Fri Mar 21 16:12:51 2008 -0500
+
+ Freescale eLBC FCM NAND driver
+
+ This is a driver for the Flash Control Machine of the enhanched Local Bus
+ Controller found on some Freescale chips (such as the mpc8313 and the
+ mpc8379).
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 41ef8c716e93fdf50efe9c1ba733ca6675daaca6
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Mar 18 15:29:14 2008 -0500
+
+ Don't panic if a controller driver does ecc its own way.
+
+ Some hardware, such as the enhanced local bus controller used on some
+ mpc83xx chips, does ecc transparently when reading and writing data, rather
+ than providing a generic calculate/correct mechanism that can be exported to
+ the nand subsystem.
+
+ The subsystem should not BUG() when calculate, correct, or hwctl are
+ missing, if the methods that call them have been overridden.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit e52b34d40a8a646e3d11638ea8797e96398dba13
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 10 18:47:33 2008 +0100
+
+ NAND: Make NAND driver less verbose per default
+
+ This patch turns off printing of bad blocks per default upon bootup.
+ This can always be shown via the "nand bad" command later.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fe56a2772e5c59577df906163d0d4b29b056140e
+Author: Sergey Kubushyn <ksi@koi8.net>
+Date: Wed Jan 9 15:36:20 2008 +0100
+
+ NAND: Davinci driver updates
+
+ Here comes a trivial patch to cpu/arm926ejs/davinci/nand.c. Unfortunately I
+ don't have hardware handy so I can not test it at the moment but changes are
+ rather trivial so it should work. It would be nice if somebody with a
+ hardware checked it anyways.
+
+ Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
+
+commit deac913effd8d80535c9ff4687b6fcdff540c554
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 5 16:50:32 2008 +0100
+
+ NAND: Fix compilation warning and small coding style issue
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c568f77acdf896fc3dd6413ce53205b17ba809a3
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 5 16:49:37 2008 +0100
+
+ NAND: Update nand_spl driver to match updated nand subsystem
+
+ This patch changes the NAND booting driver nand_spl/nand_boot.c to match
+ the new infrastructure from the updated NAND subsystem. This NAND
+ subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
+ subsystem.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3df2ece0f0fbba47d27f02fff96c533732b98c14
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 5 16:47:58 2008 +0100
+
+ NAND: Update 4xx NDFC driver to match updated nand subsystem
+
+ This patch changes the 4xx NAND driver ndfc.c to match the new
+ infrastructure from the updated NAND subsystem. This NAND
+ subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
+ subsystem.
+
+ Tested successfully on AMCC Sequoia and Bamboo.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 12072264528eba33737bc9674e19f0e925ffda23
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 5 16:43:25 2008 +0100
+
+ NAND: Change nand_wait_ready() to not call nand_wait()
+
+ This patch changes nand_wait_ready() to not just call nand_wait(),
+ since this will send a new command to the NAND chip. We just want to
+ wait for the chip to become ready here.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9ad754fef5053144daed3b007adaf1c9bec654c9
+Author: William Juul <william.juul@datarespons.no>
+Date: Fri Dec 14 16:33:45 2007 +0100
+
+ make nand dump and nand dump.oob work
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 43ea36fb8fdcbc6e26f0caffe808c63633b18838
+Author: William Juul <william.juul@datarespons.no>
+Date: Mon Nov 19 14:46:00 2007 +0100
+
+ moving files from yaffs2/direct/ to yaffs2/ and deleting all symlinks
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+
+commit 98824ce3f95e6c4d08d439b779c0acb0048045a6
+Author: William Juul <william.juul@tandberg.com>
+Date: Tue Jun 10 16:18:13 2008 -0500
+
+ Clean out unneeded files
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+
+commit ec29a32b5a71b203f7d9087f1f4d786e7f13dd23
+Author: William Juul <william.juul@datarespons.no>
+Date: Fri Nov 16 08:44:27 2007 +0100
+
+ Create symlinks from yaffs2/direct to yaffs2
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+
+commit 90ef117b68387d66763291af0117677644166611
+Author: William Juul <william.juul@datarespons.no>
+Date: Thu Nov 15 12:23:57 2007 +0100
+
+ Incorporate yaffs2 into U-boot
+
+ To use YAFFS2 define CONFIG_YAFFS2
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 0e8cc8bd92257da2e1df88cbc985e166e472ce61
+Author: William Juul <william.juul@datarespons.no>
+Date: Thu Nov 15 11:13:05 2007 +0100
+
+ YAFFS2 import
+
+ Direct import of yaffs as a tarball as of 20071113 from their public
+ CVS-web at http://www.aleph1.co.uk/cgi-bin/viewcvs.cgi/yaffs2/
+
+ The code can also be imported on the command line with:
+ export CVSROOT=:pserver:anonymous@cvs.aleph1.co.uk:/home/aleph1/cvs cvs logon
+ (Hit return when asked for a password)
+ cvs checkout yaffs2
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
+
+commit 3043c045d5a9897faba7d5c7218c2f4d06cd0038
+Author: William Juul <william.juul@datarespons.no>
+Date: Wed Nov 14 14:28:11 2007 +0100
+
+ Whitespace cleanup and marking broken code.
+
+ Changes requested by maintainer Stefan Roese after
+ posting patch to U-boot mailing list.
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 5e1dae5c3db7f4026f31b6a2a81ecd9e9dee475f
+Author: William Juul <william.juul@datarespons.no>
+Date: Fri Nov 9 13:32:30 2007 +0100
+
+ Fixing coding style issues
+
+ - Fixing leading white spaces
+ - Fixing indentation where 4 spaces are used instead of tab
+ - Removing C++ comments (//), wherever I introduced them
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 4cbb651b29cb64d378a06729970e1e153bb605b1
+Author: William Juul <william.juul@datarespons.no>
+Date: Thu Nov 8 10:39:53 2007 +0100
+
+ Remove white space at end.
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
+Author: William Juul <william.juul@datarespons.no>
+Date: Wed Oct 31 13:53:06 2007 +0100
+
+ Update MTD to that of Linux 2.6.22.1
+
+ A lot changed in the Linux MTD code, since it was last ported from
+ Linux to U-Boot. This patch takes U-Boot NAND support to the level
+ of Linux 2.6.22.1 and will enable support for very large NAND devices
+ (4KB pages) and ease the compatibility between U-Boot and Linux
+ filesystems.
+
+ This patch is tested on two custom boards with PPC and ARM
+ processors running YAFFS in U-Boot and Linux using gcc-4.1.2
+ cross compilers.
+
+ MAKEALL ppc/arm has some issues:
+ * DOC/OneNand/nand_spl is not building (I have not tried porting
+ these parts, and since I do not have any HW and I am not familiar
+ with this code/HW I think its best left to someone else.)
+
+ Except for the issues mentioned above, I have ported all drivers
+ necessary to run MAKEALL ppc/arm without errors and warnings. Many
+ drivers were trivial to port, but some were not so trivial. The
+ following drivers must be examined carefully and maybe rewritten to
+ some degree:
+ cpu/ppc4xx/ndfc.c
+ cpu/arm926ejs/davinci/nand.c
+ board/delta/nand.c
+ board/zylonite/nand.c
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit cd82919e6c8a73b363a26f34b734923844e52d1c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 12 16:08:38 2008 +0200
+
+ Coding style cleanup, update CHANGELOG, prepare release
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 17e900b8c0f38d922da47073246219dce2a847f2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 12 14:54:04 2008 +0200
+
+ MVBC_P: fix compile problem
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 52b047ae48219b59bebe37ba743ab103fd4f8316
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 12 12:10:11 2008 +0200
+
+ MPC8272ADS: fix build error: 'bd_t' has no member named 'pci_clk'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c9c101c660b3d1995045c61c7c6041f52b6cf335
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 12 00:36:53 2008 +0200
+
+ ads5121: fix compiler warnings (unused variables)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 902ca09246039964d59bbcb519b1e1b5aed01308
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Aug 11 11:29:28 2008 -0500
+
+ 85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS
+
+ Use CONFIG_NUM_CPUS to match existing define used by 86xx.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 3216ca9692ff80d7c638723ef448f3d36301d9e7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Aug 11 09:20:53 2008 -0500
+
+ Fix fallout from autostart revert
+
+ The autostart revert caused a bit of duplicated code as well as
+ code that was using images->autostart that needs to get removed so
+ we can build again.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3cf8a234b8e8c02e4da1f23566043bc288b05220
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Aug 11 09:16:25 2008 -0500
+
+ Fix compile error related to r8a66597-hcd & usb
+
+ When building the 8544DS board we get this error:
+
+ In file included from r8a66597-hcd.c:22:
+ u-boot/include/usb.h:190:2: error: #error USB Lowlevel not defined
+ make[1]: *** [r8a66597-hcd.o] Error 1
+
+ The cleanest fix is to only build r8a66597-hcd.c if CONFIG_USB_R8A66597_HCD
+ is set.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2d0daa03612338a813e3c9d22680e54eabfea378
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Aug 4 14:02:26 2008 -0500
+
+ POWERPC 86xx: Move BAT setup code to C
+
+ This is needed because we will be possibly be locating
+ devices at physical addresses above 32bits, and the asm
+ preprocessing does not appear to deal with ULL constants
+ properly. We now call write_bat in lib_ppc/bat_rw.c.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9de67149db576c91b9c2a0a182652331e7e44211
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Aug 4 14:01:53 2008 -0500
+
+ POWERPC: Add synchronization to write_bat in lib_ppc/bat_rw.c
+
+ Perform sync/isync as required by the architecture.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 23f935c073e7578c6066804fd2f9ee116cae6ffe
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Aug 4 14:01:16 2008 -0500
+
+ POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d config
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5276a3584d26a9533404f0ec00c3b61cf9a97939
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sun Aug 3 21:44:10 2008 +0200
+
+ i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.
+
+ Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
+ contacts instead of only the first 256 ones as is the case prior to
+ this patch.
+
+ Add missing MUX_* macros and update board files to use the new macros.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit b6b183c5b2fffd4c456b7e3fcb064cceb47fe7ac
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sun Aug 3 21:43:37 2008 +0200
+
+ i.MX31: Fix IOMUX related typos
+
+ Correct the names of some IOMUX macros.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 4d57b0fb2927d4f50d834884b4ec4a7ca01708b0
+Author: Steve Sakoman <steve@sakoman.com>
+Date: Mon Aug 11 20:26:16 2008 +0200
+
+ OneNAND: Remove unused parameters to onenand_verify_page
+
+ The block and page parameters of onenand_verify_page() are not used. This causes a compiler error when CONFIG_MTD_ONENAND_VERIFY_WRITE is enabled.
+
+ Signed-off-by: Steve Sakoman <steve@sakoman.com>
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit e84d568fa2a9f4ce7888141e71676368ef6b3f25
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 8 18:00:40 2008 +0200
+
+ video: fix bug in cfb_console code
+
+ FILL_15BIT_555RGB macro extension for pixel swapping
+ by commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
+ introduced a bug in cfb_console:
+
+ Bitmaps with odd-numbered width won't be rendered
+ correctly and even U-Boot crashes are observed on
+ some platforms while repeated rendering of such
+ bitmaps with "bmp display". Also if a bitmap is
+ rendered to an odd-numbered x starting position,
+ the same problem occurs. This patch is an attempt
+ to fix it.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit d9015f6a50d7258125349ef5c2af836458a0029a
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 8 18:00:39 2008 +0200
+
+ video: fix bug in logo_plot
+
+ If logo_plot() should ever be called with x starting
+ position other than zero and for pixel depths greater
+ than 8bpp, logo colors distortion will be observed.
+ This patch fixes the issue.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 406819ae94f79f5b59e01d163380ca7d83709251
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 11 00:17:52 2008 +0200
+
+ MAINTAINERS: sort entries
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cfc442d7913d4d1c3a9bf494f90c012c2f8c3bdc
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Thu Aug 7 18:19:28 2008 +0800
+
+ Add mpc7448hpc2 maintainer information
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit a9fe0c3e7ca48afa50d6a0db99fa91e7282d73d8
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Thu Aug 7 13:13:27 2008 +0530
+
+ common/cmd_load.c - Minor code & Coding Style cleanup
+
+ - os_data_header Variable is a carry over feature
+ & unused. So removed all instance of this variable
+ - Minor Code Style Update
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0d28f34bbe56d0971bd603789dcc6fe7adf11f14
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Wed Aug 6 19:32:33 2008 +0200
+
+ Update the U-Boot wiki URL.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit aa5ffa16d7e4c461b7b77bf8e79d2ef5638cf754
+Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
+Date: Sun Aug 10 17:56:36 2008 +0200
+
+ OneNAND: Remove base address offset usage
+
+ While locally preparing some U-Boot patches for ARM based OMAP3 boards, some
+ using OneNAND and some using NAND, we found some differences in OneNAND and
+ NAND command address handling.
+
+ As this might confuse users (it already confused us), we like to align OneNAND
+ and NAND address handling.
+
+ The issue is that cmd_onenand.c subtracts the onenand base address from the
+ addresses you type into the u-boot command line so, unlike nand, you can't
+ use addresses relative to the start of the onenand part e.g. this won't work:
+
+ onenand read 82000000 280000 400000
+
+ you have to use:
+
+ onenand read 82000000 20280000 400000
+
+ Looking at recent git, the only board currently using OneNAND is Apollon, and
+ for this the OneNAND base address is 0 (apollon.h)
+
+ #define CFG_ONENAND_BASE 0x00000000
+
+ so patch below won't break any existing boards and will align OneNAND and NAND
+ handling on boards where OneNAND base address is != 0.
+
+ Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+ Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit c11528083ef6e55e76df742228c26e39d151813d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Aug 7 09:28:20 2008 -0500
+
+ mpc85xx: workaround old binutils bug
+
+ The recent change to move the .bss outside of the image gives older
+ binutils (ld from eldk4.1/binutils-2.16) some headache:
+
+ ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)
+ ppc_85xx-ld: final link failed: Bad value
+
+ We workaround it by being explicit about the program headers and not
+ assigning the .bss to a program header.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0bf202ec586d4466c900e987720fa635c594d689
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 10 01:26:26 2008 +0200
+
+ Revert "[new uImage] Add autostart flag to bootm_headers structure"
+
+ This reverts commit f5614e7926863bf0225ec860d9b319741a9c4004.
+
+ The commit was based on a misunderstanding of the (documented)
+ meaning of the 'autostart' environment variable. It might cause
+ boards to hang if 'autostart' was used, with the potential to brick
+ them. Go back to the documented behaviour.
+
+ Conflicts:
+
+ common/cmd_bootm.c
+ common/image.c
+ include/image.h
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 29f8f58ff40c67f7f2e11afd1715173094e52ac2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Aug 9 23:17:32 2008 +0200
+
+ TQM8xx{L,M}: try to normalize config files for TQM8xx? based board
+
+ - enable CFI driver where this was forgotten
+ - enable mtdparts support
+ - adjust default environment
+ etc.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 41266c9b5a5f873df3ec891bb0907616958b5602
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Aug 5 10:51:57 2008 -0500
+
+ FIT: Fix handling of images without ramdisks
+
+ boot_get_ramdisk() should not treat the case when a FIT image does
+ not contain a ramdisk as an error.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Michal Simek <monstr@monstr.eu>
+
+commit f77d92a3f56d88e63cc02226a1204b3bdbac6961
+Author: Sergey Lapin <slapin@ossfans.org>
+Date: Sat Aug 9 01:39:09 2008 +0400
+
+ DataFlash: AT45DB021 fix and AT45DB081 support
+
+ Fix for page size of AT45DB021. Also adding bigger AT45DB081
+ which comes with some newer boards.
+
+ Signed-off-by: Sergey Lapin <slapin@ossfans.org>
+
+commit ba9324451b662dd393afa53e5cc36fc5d3d10966
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Aug 8 16:30:23 2008 +0900
+
+ sh: Update sh7763rdp config
+
+ Add sh_eth support to sh7763rdp.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+
+commit 21f971ec265f6042ec21636d55d06a6bc0751077
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 7 01:22:29 2008 +0200
+
+ TQM823L: re-enable logo support; update LCD_INFO text
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3b8d17f0f082073346c0df017c9dfd6acdb40d6d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Aug 8 16:41:56 2008 +0200
+
+ TQM8xxL: fix support for second flash bank
+
+ When switching the TQM8xxL modules to use the CFI flash driver,
+ support for the second flash bank was broken because the CFI driver
+ did not support dynamically sized banks. This gets fixed now.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2a112b234d879f6390503a5f4e38246acce9d0b0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Aug 8 16:39:54 2008 +0200
+
+ CFI: allow for dynamically determined flash sizes and addresses
+
+ The CFI driver allowed only for static initializers in the
+ CFG_FLASH_BANKS_LIST definition, i. e. it did not allow to map
+ several flash banks contiguously if the bank sizes were not known in
+ advance, which kind of violates U-Boot's design philosophy.
+
+ (will be used for example by the TQM8xxL boards)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d9d78ee46d9a396d0a81d00c2b003a9bd32c2e61
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Aug 7 23:26:35 2008 -0700
+
+ QE UEC: Fix compiler warnings
+
+ Moved static functions earlier in file so forward declarations are not needed.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d5d28fe4aad5f4535400647a5617c11039506467
+Author: David Saada <David.Saada@ecitele.com>
+Date: Mon Mar 31 02:37:38 2008 -0700
+
+ QE UEC: Add MII Commands
+
+ Add MII commands to the UEC driver. Note that once a UEC device is selected,
+ any device on its MDIO bus can be addressed.
+
+ Signed-off-by: David Saada <david.saada@ecitele.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit fd0f2f3796ff2a7a32d35deb1b7996e485849df7
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Jul 9 21:07:38 2008 +0900
+
+ usb: add support for R8A66597 usb controller
+
+ add support for Renesas R8A66597 usb controller.
+ This patch supports USB Host mode.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 1d10dcd041aaeae9fd7c821005692898a0303382
+Author: Hunter, Jon <jon-hunter@ti.com>
+Date: Sat Jul 26 18:59:16 2008 -0500
+
+ Add support for OMAP5912 and OMAP16xx to usbdcore_omap1510.c
+
+ Add support to drivers/usb/usbdcore_omap1510.c for OMAP5912 and OMAP16xx devices.
+
+ Signed-off-by: Jon Hunter <jon-hunter@ti.com>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit eab1007334b93a6209f1ec33615e26ef5311ede7
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Wed Aug 6 15:42:52 2008 -0400
+
+ ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.
+
+ The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
+ configuration to match the schematic, and also sets the SDR0_PFC1 register to
+ select the corresponding mode for the UARTs.
+
+ Signed-off-by: Steven A. Falco <sfalco@harris.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0eb5717a85b6cba3f67c11fa89bdde38dcd081b5
+Author: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+Date: Wed Aug 6 14:42:13 2008 +0200
+
+ avr32: add support for EarthLCD Favr-32 board
+
+ This patch adds support for the Favr-32 board made by EarthLCD.
+
+ This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
+ has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
+ Ethernet, audio out, USB device, SD-card slot, USART and various other
+ connectors for cennecting stuff to SPI, I2C, GPIO, etc.
+
+ Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit bc9019e19758a19a388fb20ef18dc771cd39fdda
+Author: Rafael Campos <rafael.campos@hanscan.com>
+Date: Thu Jul 31 10:22:20 2008 +0200
+
+ cfi-flash: Added support to flash_real_protect for Atmel flash devices
+
+ Some of the flash memories produced by ATMEL start in read-only mode.
+ We need to unprotect it. This patch allows the AT49BV6416 to work with
+ cfi_flash memories. Tested in the at91rm9200ek board.
+
+ Signed-off-by: Rafael Campos Las Heras <rafael.campos@hanscan.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7949839e5836bf8b1074bb6142c46d30ac3aa350
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Aug 5 15:36:39 2008 +0200
+
+ cfi-flash: Add definition for the AM29LV800BB AMD NOR-flash
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1318673045fe188c6e24c582b1e6efc00ae1c62c
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Aug 6 14:06:03 2008 +0200
+
+ Fix merge problems
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f2302d4430e7f3f48308d6a585320fe96af8afbd
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Aug 6 14:05:38 2008 +0200
+
+ Fix merge problems
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6689484ccd43189322aaa5a1c6cd02cdd511ad7d
+Author: Kenneth Johansson <kenneth@southpole.se>
+Date: Tue Jul 15 12:13:38 2008 +0200
+
+ mpc5121: Move iopin features from board specific to common files.
+
+ And in the process eliminate some duplicate register defines.
+
+ Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
+
+commit ef11df6b66ecf5797e94ba322254b8fb7a4e2e12
+Author: John Rigby <jrigby@freescale.com>
+Date: Tue Aug 5 17:38:57 2008 -0600
+
+ mpc5121: squash some fdt fixup errors
+
+ On ADS5121 when booting linux the following errors are seen:
+ Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND
+ Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND
+ Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND
+
+ This is caused by ft_cpu_setup trying to deal with
+ both old and new soc node naming. This patch
+ fixes this by being smarter about what to
+ fixup.
+
+ Also do soc node fixups by compatible instead of by path.
+ A new board config called OF_SOC_COMPAT defined
+ to be "fsl,mpc5121-immr" replaces the old
+ OF_SOC node path that was defined to be "soc@80000000".
+
+ Old device trees still work, but the compatiblity
+ is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
+ which is on by default in include/configs/ads5121.h.
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 81091f58f0c58ecd26c5b05de2ae20ca6cdb521c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 2 23:48:30 2008 +0200
+
+ drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4cd7e6528f61ec669755c3754bb4f9779874fab3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 2 23:48:32 2008 +0200
+
+ nios2/sysid: fix printf warning
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 66da6fa0e35e7ee56628c85981709afe7180fc8e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 2 23:48:33 2008 +0200
+
+ Fix remaining build issues with MPC8xx FADS boards.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 81d3f1fdddafd1eb53bbca8739f488d417eb3dd2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 2 23:48:31 2008 +0200
+
+ nios2: fix phys_addr_t and phys_size_t support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5fa62000db6d0b46ecdeadbeb50faf5197db49ef
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 2 23:48:34 2008 +0200
+
+ mvbc_p: Fix problem with '#if (CONFIG_CMD_KGDB)'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1464eff77e7fdaed609ecf263a2423c9dcf96b1f
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Fri Aug 1 09:48:29 2008 +0100
+
+ Fix bitmap display for atmel lcd controller
+
+ The current lcd_display_bitmap() function does not work properly
+ for the Atmel LCD controller.
+
+ 2 fixes need to be done:-
+
+ (a) when setting the colour map, use the lcd_setcolreg() function
+ as provided by the Atmel driver
+ (b) the data is never actually written to the lcd framebuffer !!
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 2a433c66b1e2770349fe4911be23c375f053ebd8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 1 08:40:34 2008 +0200
+
+ qemu_mips: update README to follow qemu update about default machine
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ac169d645f5f0e0b9a232563099209e92a355d8e
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 31 19:53:21 2008 -0500
+
+ ColdFire: Fix compilation issue caused by a missing function
+
+ Implement usec2ticks() which is used by fsl_i2c.c in
+ lib_m68k/time.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 01ae85b58b51d2fb1fac5b93095f6042cf48ae7b
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 31 19:53:06 2008 -0500
+
+ Fix compilation error for TASREG
+
+ TASREG is ColdFire platform, the include ppc4xx.h in
+ board/esd/common/flash.c causes conflict.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 35d3bd3cc35c508a6823dac77e0fd126808e4fc7
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 31 19:52:36 2008 -0500
+
+ Fix compilation error for MCF5275
+
+ Rename OBJ to COBJ in board/platform/Makefile
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 5c40548f01218360a1f1395198c50ff45f3035b5
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 31 19:52:28 2008 -0500
+
+ Fix compile error caused by incorrect function return type
+
+ Rename int mii_init(void) to void mii_init(void) for idmr
+ ColdFire platform
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit a58c78067c928976c082c758d3987e89ead5b191
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Aug 1 12:06:22 2008 +0200
+
+ Fix build issues with MPC8xx FADS boards.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4b50cd12a3b3c644153c4cf393f4a4c12289e5aa
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 17:54:03 2008 +0200
+
+ Prepare v1.3.4-rc2: update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a48311557db6e7e9473a6163b44bb1e6c6ed64c4
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Thu Jul 31 16:09:00 2008 +0100
+
+ Add gzipped logo support
+
+ The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows:
+
+ If this option is set, additionally to standard BMP
+ images, gzipped BMP images can be displayed via the
+ splashscreen support or the bmp command.
+
+ However, the splashscreen function *only* supports standard BMP images.
+
+ This patch adds the documented gzip support.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit a5bcb01fbde6b1f1c9863cd86e5c4c369f0121ac
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Thu Jul 31 15:56:48 2008 +0100
+
+ Fix Atmel LCD controller endianess for AVR32 processors
+
+ The Atmel lcd controller is used on Atmel's AT91 (little endian) and
+ AVR32 (big endian) platforms.
+
+ As such, the controller can handle both big and little endian memory.
+
+ This patch fixes the driver for the AVR32 platform.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit cdb8bd2fd3bcbe65d8e4334a55f5a667845426a1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jul 31 15:56:01 2008 +0200
+
+ apollon: fix build out of tree
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2e752be39d3e398d4ab89ffa6634c397df298297
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Jul 31 12:35:04 2008 +0200
+
+ Uncompressed images loaded to their start address shall set load_end too
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit c37207d7f51e19c17f859966f314e27cc1231801
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jul 16 16:38:59 2008 +0200
+
+ Fix printf() format problems with configurable prompts
+
+ U-Boot allows for configurable prompt strings using the
+ CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far,
+ the assumption was that any such user defined problts would contain
+ exactly one "%d" format specifier. But some boards did not.
+
+ To allow for flexible boot prompts without adding too complex code we
+ now allow to specify the whole list of printf() arguments in the user
+ definition. This is powerful, but requires a responsible user who
+ really understands what he is doing, as he needs to know for exanple
+ which variables are available in the respective context.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 54754120637b6a7f4ff774fb199fc550bcfea1da
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 17:02:14 2008 +0200
+
+ TQM85xx: fix typo introduce by commit ffbb5cb9
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0b4951d4cddca9cc800745891c95b291e47cbbd7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 15:27:01 2008 +0200
+
+ mvbc_p board: fix most build warnings.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c4ec6db074051d2f6fc76a66411c60621b22bc02
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 13:57:20 2008 +0200
+
+ E1000: clean up CONFIG_E1000_FALLBACK_MAC handling
+
+ Avoid "integer constant is too large for 'long' type" warnings.
+ And simplify the code.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9196b44334c330cc13de2464c59181e4db71f549
+Author: Matvejchikov Ilya <matvejchikov@gmail.com>
+Date: Wed Jul 30 23:21:19 2008 +0400
+
+ 8260: Making the use of gd->pci_clk dependant on the CONFIG_PCI
+
+ Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
+
+commit 6361ad4b596f5a940a01c91ae0297d98f790cbe0
+Author: Matvejchikov Ilya <matvejchikov@gmail.com>
+Date: Wed Jul 30 23:20:32 2008 +0400
+
+ PPC: Add pci_clk in the global_data for CPM2 processors
+
+ This patch adds pci_clk field to the global_data structure for the
+ processors which have CPM2 module in case the CONFIG_PCI is defined.
+
+ Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
+
+commit f0ff885ca64655bee6540eb8a25eed90b1152686
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jul 30 14:13:30 2008 -0500
+
+ mpc85xx: Update linker scripts for Freescale boards
+
+ * Move to using absolute addressing always. Makes the scripts a bit more
+ portable and common
+ * Moved .bss after the end of the image. These allows us to have more
+ room in the resulting binary image for code and data.
+ * Removed .text object files that aren't really needed
+ * Make sure _end is 4-byte aligned as the .bss init code expects this.
+ (Its possible that the end of .bss isn't 4-byte aligned)
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 57c219ad5d34dd9d49991777a62e3899595f2ec7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jul 30 08:01:15 2008 -0500
+
+ Fix compile warnings in dlmalloc
+
+ The origional code was using on odd reference to get to the first
+ real element in av_[]. The first two elements of the array are
+ not used for actual bins, but for house keeping. If we are more
+ explicit about how use the first few elements we can get rid of the
+ warnings:
+
+ dlmalloc.c: In function 'malloc_extend_top':
+ dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ ...
+
+ The logic of how this code came to be is:
+ bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ
+
+ SIZE_SZ is the size of pointer, and av_ is arry of pointers so:
+ bin_at(0) = &(av_[0])
+
+ Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3f9ae1a5d43c49a8ecf497470c3d1d80255e44b9
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 30 10:21:01 2008 +0200
+
+ ppc4xx: Fix W7OLMG compile problems by adding missing LM75 defines
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ebb86c4ecd37a7701358284e497ca4c6483c7cc5
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 30 09:59:51 2008 +0200
+
+ cmd_bootm.c: Fix problem with '#if (CONFIG_CMD_USB)'
+
+ A recent patch used '#if (CONFIG_CMD_USB)' instead of
+ '#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes
+ common/bootm.c compile again.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 2cb9080427fe641dcb71da46cd0634dd406f37ed
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Jul 22 08:01:43 2008 +0900
+
+ Remove unused I2C at apollon board
+
+ There are no I2C devices on this board.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 3c95960e526b3b026da20201db64526f46faf14b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 10:12:09 2008 +0200
+
+ at91rm9200dk, csb637: fix NAND related build problems
+
+ Tried fixing NAND support for the at91rm9200dk board; untested.
+ Disabled NAND support in the csb637 board config file.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9246f5ecfd353ae297a02ffd5328402acf16c9dd
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Jul 30 12:39:28 2008 +0200
+
+ ppc4xx: ML507: Environment in flash and MTD Support
+
+ - Relocate the location of U-Boot in the flash
+ - Save the environment in one sector of the flash memory
+ - MTD Support
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a8a16af4d59d14cc1c1187c10aaad80d6b8394b5
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Tue Jul 29 17:16:10 2008 +0200
+
+ ppc4xx: ML507: Use of get_ram_size in board ml507
+
+ - Change suggested by WD
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 01a004313c5ec2d128b611df4c208b1b0d3c3fb4
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Jul 21 20:30:07 2008 +0200
+
+ ppc4xx: ML507: U-Boot in flash and System ACE
+
+ This patch allows booting from FLASH the ML507 board by Xilinx.
+ Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5c374c9ee16fee2bf68533cc4010b3c0df21f783
+Author: Julien May <mailinglist@miromico.ch>
+Date: Mon Jun 23 13:57:52 2008 +0200
+
+ Add support for the hammerhead (AVR32) board
+
+ The Hammerhead platform is built around a AVR32 32-bit microcontroller
+ from Atmel. It offers versatile peripherals, such as ethernet, usb
+ device, usb host etc.
+
+ The board also incooperates a power supply and is a Power over Ethernet
+ (PoE) Powered Device (PD).
+
+ Additonally, a Cyclone III FPGA from Altera is integrated on the board.
+ The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
+ DDR2 SDRAM interfaces, which will cover even the most exceptional need
+ of memory bandwidth. Together with the onboard video decoder the board
+ is ready for video processing.
+
+ For more information see: http:///www.miromico.com/hammerhead
+
+ Signed-off-by: Julien May <mailinglist@miromico.ch>
+ [haavard.skinnemoen@atmel.com: various small fixes and adaptions]
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 09d318a8bb1444ec92e31cafcdba877eb9409e58
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Jul 29 12:23:49 2008 -0500
+
+ fsl_i2c: Use timebase timer functions instead of get_timer()
+
+ The current implementation of get_timer() is only really useful after we
+ have relocated u-boot to memory. The i2c code is used before that as part
+ of the SPD DDR setup.
+
+ We actually have a bug when using the get_timer() code before relocation
+ because the .bss hasn't been setup and thus we could be reading/writing
+ a random location (probably in flash).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4fc72a0d6ca85070a5e90d76cc5a853526ac09c4
+Author: Frank Svendsbøe <frank.svendsboe@gmail.com>
+Date: Tue Jul 29 14:49:31 2008 +0200
+
+ Adder8xx: Fix CFG_MONITOR_LEN
+
+ Due to increased space usage, U-Boot can no longer be stored in three sectors.
+ The current U-Boot use just over three flash sectors (197k), and U-Boot will
+ become corrupt after saving environment variables. This patch adds another 64k
+ to CFG_MONITOR_LEN.
+
+ Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com>
+
+commit a4c59ad4a21140550ada6f97690d2527c4146ce5
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Jul 29 08:47:57 2008 +0900
+
+ Add OneNAND IPL related files to gitignore
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 8d87589e8e874df7120a3d9667f051bc33bac250
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:38:25 2008 +0200
+
+ API: Teach the storage layer about SATA and MMC options.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 6b73b754f782e1ecce5048bf20b22ce56a07a5b8
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:37:48 2008 +0200
+
+ API: Dump contents of sector 0 in the demo application.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 13ca6305f2eba49c175f6370c35286141059c789
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:37:10 2008 +0200
+
+ API: Correct storage enumeration routine, other minor fixes in API storage area.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 05c7fe0f049b1c9eb9a1992f27e5e350d865f4a8
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:36:19 2008 +0200
+
+ API: Fix compilation warnings in api_examples/demo.c.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+
+commit c14eefcc48212af2f3314809605698dd8393a90a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jul 27 17:09:43 2008 +0200
+
+ Fix more printf() format warnings
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 936897d4d1365452bbbdf8430db5e7769ef08d38
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jul 25 15:18:16 2008 +0200
+
+ Fix remaining CFG_CMD_ define, ifdef and comments
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5d1d00fb36005482e1803a00ddc46efa11d719af
+Author: Stefano Babic <sbabic@denx.de>
+Date: Fri Jul 25 08:57:40 2008 +0200
+
+ Add include for config.h in command.h.
+
+ Because the cmd_tbl_s structure depends on the configuration file, it
+ must be assured that config.h is included before the structure is
+ evaluated by the compiler. If this is not certain, it could happen
+ that the compiler generates structures of different size, depending
+ on the fact if the source file includes <config.h> before or after
+ <command.h>.
+
+ The effect is that u-boot crashes when tries to relocate the command
+ table (for ppc) or try to access to the command table for other
+ architectures.
+
+ The problem can happen on board-depending commands. All general
+ commands under /common are unaffected, because they include already
+ config.h before command.h.
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 2dacb734bac9dba1db9e704d3e0b200ef521c79a
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Jul 23 13:16:06 2008 -0500
+
+ NAND: $(obj)-qualify ecc.h in kilauea NAND boot Makefile.
+
+ This fixes building out-of-tree.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 36d59bd9da9e15d19b867b48449408830f4e2ad5
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Jul 23 07:30:46 2008 +0200
+
+ Fix warnings if compiling with IDE support.
+
+ cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior
+ cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 7610db17fd4d59c51d825488526d85ede2f06767
+Author: Adrian Filipi <adrian.filipi@eurotech.com>
+Date: Tue Jul 22 14:28:11 2008 -0400
+
+ Removed support for the adsvix board.
+
+ Support for the adsvix was originally provided by Applied Data
+ Systems (ADS), inc., now EuroTech, Inc.
+ The board never shipped aside from some sample boards.
+
+ Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
+
+commit f96b44cef897bd372beb86dde1b33637c119d84d
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Jul 22 16:22:11 2008 +0200
+
+ ARM: set GD_FLG_RELOC for boards skipping relocation to RAM
+
+ If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually
+ never set, because relocation to RAM is actually never done by U-boot
+ itself. However, several pieces of code check if this flag is set at
+ some time.
+
+ So, to make sure this flag is set on boards skipping relocation, this
+ is added to the initialisation of U-boot at a moment where it is safe
+ to do so.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit e4dafff86f289b5677143a3e41da7b45c6d27fc7
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Jul 21 14:26:23 2008 -0500
+
+ fsl-i2c: fix writes to data segment before relocation
+
+ Prevent i2c_init() in fsl_i2c.c from writing to the data segment before
+ relocation. Commit d8c82db4 added the ability for i2c_init() to program the
+ I2C bus speed and save the value in i2c_bus_speed[], which is a global
+ variable. It is an error to write to the data segment before relocation,
+ which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[].
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit dbd32387920e5ad6f9dd58a7b5012bbabe2a6a21
+Author: Wolfgang Ocker <weo@reccoware.de>
+Date: Mon Jul 28 16:56:51 2008 +0200
+
+ mips: Fix baudrate divisor computation on alchemy cpus
+
+ Use CFG_MIPS_TIMER_FREQ when computing the baudrate divisor
+ on alchemy cpus.
+
+ Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit c8c845cfdc6d0217135c1d5927eebd2b133a3314
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sat Jul 5 00:08:48 2008 -0700
+
+ Moved initialization of AVR32 Ethernet controllers to board_eth_init()
+
+ Renamed initialization functions for atngw100 and atstk1000.
+ Removed initializations for these boards from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a229d291f33308ab7761d39f25fa1a53c0fc00a2
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:55:46 2008 +0200
+
+ spi flash: Fix printf() format warnings
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 252a5e0738bcafaf25f7fbb40f19a59abc2cb13e
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:55:31 2008 +0200
+
+ atmel_mci: Fix printf() format warnings
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 7f4b009f4232d57084ce0ec5aeb3b57bccb08e4c
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:55:15 2008 +0200
+
+ avr32: Fix printf() format warnings
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a79c3e8d9c31db25d5ca3ec8e08a97f323410dd4
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:52:19 2008 +0200
+
+ avr32: asm/io.h needs asm/types.h
+
+ map_physmem() takes a phys_addr_t as parameter. This type is defined in
+ asm/types.h, so we need to include that file.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 1953d128fd07f07d1c3810a28c0863ea64dae1b6
+Author: Michal Simek <monstr@monstr.eu>
+Date: Thu Jul 17 12:25:46 2008 +0200
+
+ microblaze: Fix printf() format issues
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit de2a07e534f18b1ca5f9869a4ef0604ca829cff0
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Thu Jul 17 07:27:51 2008 +0530
+
+ Remove unused code from lib_arm/bootm.c
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit ffbb5cb942e9856fa24e946977e0a60c64df04ab
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Jul 16 18:56:45 2008 +0200
+
+ tqm85xx: Demystify 'DK: !!!' comment
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit b2f44ba570f3a01113bbb745daf46f3858d22f53
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Jul 16 18:56:44 2008 +0200
+
+ 83xx/85xx/86xx: Add LTEDR local bus definitions
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit f13f64cf42d5abec3e0f920233f6a7a61e7ae494
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Jul 16 16:22:32 2008 +0200
+
+ serial_xuartlite.c: fix compiler warnings
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 86446d3a5d9d3ca81e85d1ccd3accaaae6f8e3c9
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 11:03:35 2008 +0200
+
+ POST: Add disable interrupts in some of the missing CPU POST tests
+
+ Some CPU POST tests did not disable the interrupts while running. This
+ seems to be necessary to protect this self modifying code.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 97a3bf268d096e0e97e54048448c35114edcf557
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 10:43:24 2008 +0200
+
+ ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL
+
+ This is needed for boards that define CFG_64BIT_STRTOUL but don't define
+ CFG_64BIT_LBA.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0043ac55024963295fc79b39af85b6dc3b261e17
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Fri Jul 18 11:22:23 2008 +0200
+
+ POST PPC4xx/spr IVPR only if PPC440
+
+ The SPR IVPR register is only present (as far as I know) for
+ processors with a PPC440 core.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 1092fbd64748dfa2e979b102611ece9bc5ec1855
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 10:42:29 2008 +0200
+
+ ppc4xx: Enable 64bit printf format on 440/460 platforms
+
+ This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all
+ 440/460 platforms. This may be needed since those platforms support
+ 36bit physical address space.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 66fe183b1dd9c7534605147a8ecfed1c02345ee5
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 15:57:23 2008 +0200
+
+ ppc4xx: Fix incorrect MODTx setup for some DIMM configurations
+
+ This patch fixes a problem with incorrect MODTx (On Die Termination)
+ setup for a configuration with multiple DIMM's and multiple ranks.
+ Without this change Katmai was unable to boot Linux with DDR2 frequency
+ >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux
+ with DDR2 frequency = 640MHz and mem=4GB.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 60204d06ed9f8c2a67cc79eb67fd2b1d22bcbc8c
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 12:24:41 2008 +0200
+
+ ppc4xx: Minor coding style cleanup of Xilinx Virtex5 ml507 support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 086511fc96a8a9bb56e5e19a3d84c40f4dba80cc
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Thu Jul 17 12:47:09 2008 +0200
+
+ ppc4xx: ML507 Board Support
+
+ The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
+ among others:
+ -Virtex 5 FX FPGA (With a ppc440x5 in it)
+ -256MB of SDRAM2
+ -32MB of Flash
+ -I2C Eeprom
+ -System ACE chip
+ -Serial ATA connectors
+ -RS232 Level Conversors
+ -Ethernet Transceiver
+
+ This patch gives support to a standard design produced by EDK for this
+ board: ppc440, uartlite, xilinx_int and flash
+
+ - Includes Changes propossed by Stefan Roese and Michal Simek
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit d865fd09809a3a18669f35f970781820af40e4de
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Thu Jul 17 11:44:12 2008 +0200
+
+ ppc4xx: CPU PPC440x5 on Virtex5 FX
+
+ -This patchs gives support for the embbedded ppc440
+ on the Virtex5 FPGAs
+ -interrupts.c divided in uic.c and interrupts.c
+ -xilinx_irq.c for xilinx interrupt controller
+ -Include modifications propossed by Stefan Roese
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 340ccb260f21516be360745d5c5e3bd0657698df
+Author: Sebastian Siewior <bigeasy@linutronix.de>
+Date: Wed Jul 16 20:04:49 2008 +0200
+
+ cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA
+
+ This got broken by commits 93c56f212c
+ [cfi_flash: support of long cmd in U-boot.]
+
+ That command needs to be in little endian format on BE machines
+ with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0
+ gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into
+ the cmdbuf in case portwidth = chipwidth = 8bit.
+
+ Cc: Alexey Korolev <akorolev@infradead.org>
+ Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
+ Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
+
+commit 11188d55bc16dd907451c00282e00a038f73dd62
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 17 10:40:51 2008 +0200
+
+ ppc4xx: Fix alphabetical order in 4xx Makefile part (redwood)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 021f6df6e96af5b387810cf96d24848da1faa55c
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Jul 10 17:20:51 2008 +0400
+
+ 83xx: mpc8315erdb: fix silly thinko in fdt_tsec1_fixup
+
+ The thinko was quite silly indeed, I messed with !ptr. Normally this
+ would trigger some fault, but in U-Boot NULL pointer is equal to phys
+ 0, so the code was working still, just didn't actually test mpc8315erdb
+ environment variable value. Heh.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 25f5f0d49a3ae89bf4396f2557ce98debfef21da
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Tue Jul 8 21:00:04 2008 +0400
+
+ 83xx: mpc8315erdb: add support for switching between ULPI/UTMI USB PHYs
+
+ Freescale ships MPC8315E-RDB boards either with TSEC1 and USB UTMI
+ support, or without TSEC1 but with USB ULPI PHY support in addition.
+ With this patch user can specify desired USB PHY.
+
+ Also, it seems that we can't distinguish the two boards in software, so
+ user have to set `mpc8315erdb' environment variable to either 'tsec1'
+ (TSEC1 enabled) or `ulpi' (board with ULPI PHY, TSEC1 disabled), so that
+ Linux will not probe for TSEC1.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 015b27b9e165fcf220e42f2c4afbaeaa2758fcf6
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Tue Jul 8 20:59:43 2008 +0400
+
+ fdt_support: fdt_fixup_dr_usb: add support for phy_type fixups
+
+ Currently U-Boot can only fixup the usb dr_mode, but some boards (namely
+ MPC8315E-RDB) can use two PHY types: ULPI (stand-alone OTG port) or UTMI
+ (connected to the four-ports hub, usb host only).
+
+ This patch implements support for passing Dual-Role USB controller's
+ device tree property phy_type through the usb_phy_type environment
+ variable.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 699f05125509249072a0b865c8d35520d97cd501
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 15 22:22:44 2008 +0200
+
+ Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit bcab74baa6b1b1c969038ab6f64a186239180405
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Jul 15 11:23:02 2008 -0400
+
+ Round the serial port clock divisor value returned by calc_divisor()
+
+ Round the serial port clock divisor value returned by
+ calc_divisor()
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 0328ef0edfe950f0b7b8b368dae482531506b74a
+Author: Robin Getz <rgetz@blackfin.uclinux.org>
+Date: Tue Jul 15 21:44:46 2008 +0200
+
+ Fix DHCP protocol so U-Boot does not respond too early
+ on the network with it's offered IP number; it should not reply until
+ after it has received a DHCP ACK message. Also ensures that U-Boot
+ does it's DHCPREQUEST as broadcast (per RFC 2131).
+
+ Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7288f972fcaee14a9741cb08c8688a23874b4a2e
+Author: Sebastian Siewior <bigeasy@linutronix.de>
+Date: Tue Jul 15 13:35:23 2008 +0200
+
+ cfi_flash: make the command u32 only
+
+ This got changed by commit 93c56f212c
+ [cfi_flash: support of long cmd in U-boot.]
+
+ Long is the wrong type because it will behave differently on 64bit
+ machines in a way that is probably not expected. u32 should be
+ enough.
+
+ Cc: Alexey Korolev <akorolev@infradead.org>
+ Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
+ Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
+
+commit 31cfe57491b183acae575d486729e158f016c27b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Jul 14 23:48:41 2008 +0200
+
+ tools/gitignore: update to all generated files
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Wed Jul 9 18:30:44 2008 +0200
+
+ mpc5xxx: Add MVBC_P board support
+
+ The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
+ controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit e2d31fb3450653115452144363d5bde4e5e3e693
+Author: Timur Tabi <timur@freescale.com>
+Date: Thu Jun 19 17:56:11 2008 -0500
+
+ Update Freescale sys_eeprom.c to handle CCID formats
+
+ Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The
+ NXID format replaces the older CCID format, but it's important to support both
+ since most boards out there still use the CCID format. This change is in
+ preparation for using one file to handle both formats. This will also unify
+ EEPROM support for all Freescale 85xx and 86xx boards.
+
+ Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
+ instead of ID_EEPROM_ADDR.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Jul 11 17:22:43 2008 +0900
+
+ pci: sh: Add pci_skip_dev and pci_print_dev function
+
+ Add function of new PCI, pci_skip_dev and pci_print_dev.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1107014e835ec9d46c0333f4211d104f77442db0
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jul 14 20:29:07 2008 -0500
+
+ Clean up INIT_RAM options
+
+ The L2_INIT_RAM option was unused, and recent changes to the TLB code
+ meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce
+ the amount of mapped space attached to nothing, we change things so the TLBs
+ get cleared.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 4524561820a9327e89107854b3a7187800ccf719
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jul 14 20:26:57 2008 -0500
+
+ Remove fake flash bank from 8544 DS
+
+ The fake flash bank was generating errors for anyone who didn't have a
+ PromJET hooked up to the board. As that constitutes the vast majority of
+ users, we remove it.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 14 14:07:03 2008 -0500
+
+ MPC8544DS: Add ATI Video card support
+
+ Add support for using a PCIe ATI Video card on PCIe2.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 14 14:07:02 2008 -0500
+
+ 85xx: Add some L1/L2 SPR register definitions
+
+ Add new L1/L2 SPRs related to e500mc cache config and control.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e5852787f0c3c442a276262f13d91ca450605ac0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 14 14:07:01 2008 -0500
+
+ MPC8544DS: Report board id, board version and fpga version.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 73f15a060f67a2462551c334215bd20fac6b81d1
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 14 14:07:00 2008 -0500
+
+ 85xx: Cleanup L2 cache size detection
+
+ The L2 size detection code was a bit confusing and we kept having to add
+ code to it to handle new processors. Change the sense of detection so we
+ look for the older processors that aren't changing.
+
+ Also added support for 1M cache size on 8572.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c3ca7e5e00a24451f20df3bded9a61ba541921df
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:08 2008 -0400
+
+ sbc8560: enable CONFIG_OF_LIBFDT by default
+
+ Make the default build for the sbc8560 board be powerpc
+ capable with libfdt support.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jul 14 20:04:40 2008 -0500
+
+ Fix indentation for default boot environment variables
+
+ This was proposed by Paul Gortmaker in response to Wolfgang's comments on
+ similar #defines in sbc8560.h.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:07 2008 -0400
+
+ sbc8560: add default fdt values
+
+ Add in the default fdt settings and the typical EXTRA_ENV
+ settings as borrowed from the mpc8560ads. Fix a couple
+ of stale references to the mpc8560ads dating back to the
+ original clone/fork.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit d04e76edf92f7f89696989e8702b97e020455af3
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:06 2008 -0400
+
+ sbc8560: add in ft_board_setup()
+
+ Add in for the sbc8560, the ft_board_setup() routine, based on what is
+ in use for the Freescale MPC8560ADS board.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit c158bcaca3b31cbe38c4143812e6170e38a57393
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:05 2008 -0400
+
+ sbc8560: define eth0 and eth1 instead of eth1 and eth2
+
+ The existing config doesn't define CONFIG_HAS_ETH0, and so the
+ fdt support doesn't update the zeros in the dtb local-mac with
+ real data from the u-boot env. Since the existing config is
+ tailored to just two interfaces, get rid of the ETH2 definitions
+ at the same time.
+
+ Also don't include any end user specific data into the environment
+ by default -- things like MAC address, network parameters etc. need
+ to come from the end user.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:04 2008 -0400
+
+ sbc8560: properly set cs0_bnds for 512MB
+
+ The sbc8560 board ships with 512MB of memory installed,
+ but the current cs0_bnds is hard coded for 256MB. Set the
+ value based on CFG_SDRAM_SIZE.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:03 2008 -0400
+
+ sbc8560: proper definitions for TSEC.
+
+ The definitions for the TSEC have become out of date. There is no
+ longer any such options like "CONFIG_MPC85xx_TSEC1" or similar.
+ Update to match those of other boards, like the MPC8560ADS.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 71074abbe0c76429577aff58aeff0a24ad210b23
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Wed Jul 9 13:23:05 2008 -0400
+
+ 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq
+
+ Some boards that have external 16550 UARTs don't have a direct
+ tie between bi_busfreq and the clock used for the UARTs. Boards
+ that do have such a tie should set CFG_NS16550_CLK to be
+ get_bus_freq(0) -- which most of them do already.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 24ef76f320fbadf074105229826514db140f939f
+Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+Date: Wed Jul 2 07:03:53 2008 -0700
+
+ Change the temp map to ROM to align addresses to page size.
+
+ With a page size of BOOKE_PAGESZ_16M, both the real and effective
+ addresses must be multiples of 16MB. The hardware silently truncates
+ them so the code happens to work. This patch clarifies the situation
+ by establishing addresses that the hardware doesn't need to truncate.
+
+ Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 06b4186c10204b6683edb047ac5f506fb0ce0937
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jun 17 17:45:22 2008 -0500
+
+ mpc85xx: use IS_E_PROCESSOR macro
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Jun 16 15:55:53 2008 -0500
+
+ fdt: add crypto node handling for MPC8{3, 5}xxE processors
+
+ Delete the crypto node if not on an E-processor. If on 8360 or 834x family,
+ check rev and up-rev crypto node (to SEC rev. 2.4 property values)
+ if on an 'EA' processor, e.g. MPC8349EA.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 85e5808e8ea9f77da5219f23394112f0b424fa5e
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Jul 11 15:10:11 2008 -0400
+
+ ARM DaVinci: Remove extern phy_t declaration by moving code to proper place
+
+ ARM DaVinci: Remove extern phy_t declaration by moving
+ code to proper place.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Jul 11 15:10:10 2008 -0400
+
+ ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init()
+
+ ARM DaVinci: Remove duplicate definitions of MACH_TYPE
+ and prototype of i2c_init().
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 348753d416cd2c9e7ec6520a544c8f33cf02a560
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 14 14:03:02 2008 -0500
+
+ Fix some more printf() format problems.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 45b16d22c64674ccd8c4637456a987463609141c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 22:38:42 2008 +0200
+
+ Fix coding style; make code better parsable by external tools
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b880cbf207b1c109d3a661417a8feddcbd729a9d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 21:19:08 2008 +0200
+
+ cpu/i386/serial.c: Fix syntax errors
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e2d45e6f4d9919e1afeac5e09557b2252832fccf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 20:41:35 2008 +0200
+
+ elppc board: Coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 82b24a8a505fc81466484b3c55b574ee0b4205bc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 20:40:22 2008 +0200
+
+ elppc board: fix syntax error.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0fe340585a6a48bd392d315b0dd84d068b1c3790
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 20:38:26 2008 +0200
+
+ EB+MCF-EV123 board: fix coding style (alingment)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6841785a0bb0f38175456a923edd634fb7dd6947
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 20:36:44 2008 +0200
+
+ EB+MCF-EV123 board: fix syntx error
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jul 7 18:02:08 2008 -0500
+
+ Remove LBC_CACHE_BASE from 8544 DS
+
+ The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping
+ space for some anyway, we were allowing speculative loads into unmapped space,
+ which would cause an exception (annoying, even if ultimately harmless).
+ Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the
+ problem.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 15:19:07 2008 +0200
+
+ Code cleanup: fix old style assignment ambiguities like "=-" etc.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d7854223c5c85b5849fbf422cc8ac0efef461c37
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 15:10:53 2008 +0200
+
+ AmigaOneG3SE: remove dead and incomplete files
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b64f190b7a34224df09b559ca111eb1b733f00ad
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 15:06:35 2008 +0200
+
+ Fix printf() format issues with sizeof_t types by using %zu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f354b73e16a86f9e9085471a830605f74f84ea5d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Jul 14 14:11:45 2008 +0200
+
+ vsprintf: add z and t options
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 25dbe98abb686d8210e1731fba85ced7d3ce874c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 13 23:07:35 2008 +0200
+
+ Fix some more printf() format issues.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d5996dd555edf52721b7691a4c59de016251ed39
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 13 19:51:00 2008 +0200
+
+ Fix some more printf() format problems.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0f9d5f6d6e814907794995c6a22af752040c35d9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 13 19:48:26 2008 +0200
+
+ ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Sat Jul 12 17:31:36 2008 +0200
+
+ Fix bug in Lime video driver
+
+ We need to wait while drawing engine clears frame
+ buffer before any further software accesses to frame
+ buffer will be initiated. Otherwise software drawn
+ parts could be partially destroyed by the drawing
+ engine or even GDC chip freeze could occur (as
+ observed on socrates board).
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jul 12 14:36:34 2008 +0200
+
+ Fix some more printf() format issues.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 18c8a28aad49803780bd8d52432ded528e37e701
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 11 15:11:57 2008 +0200
+
+ hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 11 11:50:53 2008 +0200
+
+ hwmon: Cleaning hwmon devices
+
+ Clean Makefile
+ Move device specific values to driver for better reading
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit c78fce699c7ff467ecd841da6a79f065180bf578
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 11 10:43:13 2008 +0200
+
+ FIS: repare incorrect return value with ramdisk handling
+
+ Microblaze and PowerPC use boot_get_ramdisk for loading
+ ramdisk to memory with checking return value.
+ Return 0 means success. Return 1 means failed.
+ Here is correspond part of code from bootm.c which check
+ return code.
+
+ ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
+ &rd_data_start, &rd_data_end);
+ if (ret)
+ goto error;
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 11 10:10:32 2008 +0200
+
+ microblaze: Remove useless ancient headers
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 53ea981c3124b13c137c2d10e975b7c6672266e0
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 11 10:10:31 2008 +0200
+
+ microblaze: Clean uartlite driver
+
+ Redesign uartlite driver to in_be32 and out_be32 macros
+ Fix missing header in io.h
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit dbf3dfb386a2d5d2381814e39985ab2e21894550
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Fri Jul 11 02:39:14 2008 +0200
+
+ Enable passing of ATAGs required by latest Linux kernel.
+
+commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Jul 11 10:24:15 2008 -0400
+
+ Fix integer overflow warning in calc_divisor()
+
+ which happened when rounding the serial port clock divisor
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 6b760189d77f001684e3160b355c185ca3804961
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Fri Jul 11 01:09:59 2008 +0200
+
+ Fix build time warnings in function mmc_decode_csd()
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit c15947d6ce0d59925c97fdfac692476af6e262d0
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Thu Jul 10 10:46:33 2008 -0400
+
+ ARM: Fix for broken compilation when defining CONFIG_CMD_ELF
+
+ caused by missing dcache status/enable/disable functions.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 13:53:31 2008 +0200
+
+ ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
+
+ This patch removes some ft_board_setup() functions from some 4xx boards.
+ This can be done since we now have a default weak implementation for this
+ in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
+ implementation like canyonlands need their own version.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d39a089f8bc960ba9ae6a08fda5582b578620cc1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 13 14:58:16 2008 +0200
+
+ Add last known maintainer for orphaned boards; reformat.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Thu Jul 10 13:16:04 2008 +0200
+
+ Remove kharris@nexus-tech.net from MAINTAINERS
+
+ Mail to kharris@nexus-tech.net bounces because the user doesn't exist
+ anymore. You can't be a maintainer without a valid e-mail address, so
+ move all boards that used to be maintained by Kyle Harris to the
+ "orphaned" list.
+
+ Currently, only PowerPC has a list of orphaned boards, so this patch
+ creates one for ARM as well.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 17bd17071463b0cde391ac4a0863d600474b4ea1
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Jul 10 01:15:10 2008 +0200
+
+ at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260
+
+ On the at91sam9260ep development board there is an EEPROM
+ connected to the TWI interface (PA23, PA24 Peripheral A
+ multiplexing), so we cannot use these pins as ETX2, ETX3.
+ This patch configures PA10, PA11 pins for ETX2, ETX3
+ instead of PA23, PA24 pins.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de>
+
+commit f889265753ddf4465d9d580827bb9289bfac55d6
+Author: Kenneth Johansson <kenneth@southpole.se>
+Date: Sat Jul 12 13:18:34 2008 -0600
+
+ fix DIU for small screens
+
+ The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
+ so it was not possible to set a slow pixel clock and thus prevented
+ display on small screens.
+
+ Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit b60b8573875e650e4c69be667bfc88d3ed474a7c
+Author: John Rigby <jrigby@freescale.com>
+Date: Fri Jul 11 14:44:09 2008 -0600
+
+ ADS5121 cleanup compile warnings
+
+ board/ads5121/iopin.c
+ Replace bit fields in struct iopin_t with a single
+ field and intialize it via plain old macros.
+ This fixes the type pun warnings and makes the code
+ more readable.
+
+ board/ads5121/ads5121.c
+ Add include iopin.h to ads5121.c for the iopin_initialize
+ prototype.
+
+ Add an extern void ads5121_diu_init(void)
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit bde63587622c4b830a27d1ddf7265843de9e994f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 11 22:56:11 2008 +0200
+
+ Fix some more printf() format issues.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 11 22:55:31 2008 +0200
+
+ Fixed some out-of-tree build issues
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 9 16:20:23 2008 -0500
+
+ ColdFire: Fix FB CS not setup properly for Mcf5282
+
+ Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
+ CFG_CSn_RO is defined as 0, the chipselect will not
+ be assigned.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 9 15:47:27 2008 -0500
+
+ ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC
+
+ Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
+ clock module in cpu/<cf arch>/cpu_init.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit f94945b517f10e01927101679c62361e03d4e837
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 9 15:25:01 2008 -0500
+
+ ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 9 15:21:44 2008 -0500
+
+ Fix compile error caused by missing timer function
+
+ Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit c37ea031175b807c54e6bad9b270e9bede6c0078
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 9 15:14:25 2008 -0500
+
+ Fix compile error caused by incorrect function return type
+
+ Rename int mii_init(void) to void mii_init(void)
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit ab4860b255239dbaecccdd002c8d11f4ef54dd75
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 19:27:23 2008 -0500
+
+ ColdFire: Fix power up issue for MCF5235
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 19:19:07 2008 -0500
+
+ ColdFire: Fix compiling error for MCF5275
+
+ The compiling error was caused by missing a closed parentheses
+ in speed.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 19:14:01 2008 -0500
+
+ ColdFire: Fix timer issue for MCF5272
+
+ The timer was assigned to wrong timer memory mapped which
+ caused udelay() and timer() not working properly.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 19:12:13 2008 -0500
+
+ ColdFire: Change invalid JMP to BRA caught by new v4e toolchain
+
+ Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+
+commit 8371dc2066136be21e10b7b9293e469297d77298
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 19:05:23 2008 -0500
+
+ ColdFire: Add -got=single param for new linux v4e toolchains
+
+ Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+
+commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 13:21:19 2008 -0500
+
+ ColdFire: Fix code flash configuration for M547x/M548x boards
+
+ Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+
+commit 6e37091afc07fdcc15590093fd066b0cb7399f85
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Jun 24 12:12:16 2008 -0500
+
+ ColdFire: Fix warning messages by passing correct data type in board.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 81cc32322acb1b3225ee45606ced48e2a14824dc
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu May 29 12:21:54 2008 -0500
+
+ ColdFire: Fix UART baudrate formula
+
+ The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
+ can generate the wrong divisor due to integer division truncation.
+ Round the calculated divisor value by adding 1/2 the baudrate
+ before dividing by the baudrate.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit b578fb471444cbd7db1285701ba51343baaf73fb
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 11:38:26 2008 +0200
+
+ ppc4xx: Fix include sequence in 4xx_pcie.c
+
+ This patch now moves common.h to the top of the inlcude list. This
+ is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that
+ the phys_size_t/phys_addr_t are defined to the correct size in this
+ driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 69e2c6d0d13d7c8cf1612ac090bdc4c59ba6858e
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 11 13:10:56 2008 +0200
+
+ ppc4xx: Fix compile warning in 44x_spd_ddr2.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6bd9138498c2e4f4f09190108b99157d1b2140b5
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 11 11:40:13 2008 +0200
+
+ ppc4xx: Fix small korat merge problem
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1d0554736a0a1dd59718acda660871ce56b69e18
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 11 11:34:52 2008 +0200
+
+ ppc4xx: Some Rewood cleanups (coding style, leading white spaces)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3a82113ed5934d498f25080441a8261fc9454b15
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 16:37:09 2008 +0200
+
+ ppc4xx: Add 460SX UIC defines
+
+ Only the really needed ones are added (cascading and EMAC/MAL).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 26173fc6f60521c2a8072f652f863617fc11ba9a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 30 14:11:07 2008 +0200
+
+ ppc4xx: Continue cleanup of ppc440.h
+
+ This patch continues the ppc440.h cleanup by removing some of the unused
+ defines.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d9056b7913ed6a228d2f33671d916efedee541dd
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 30 14:05:05 2008 +0200
+
+ ppc4xx: Cleanup Katmai & Yucca PCIe register usage
+
+ This patch cleans up the 440SPe PCIe register usage. Now only defines
+ from the include/asm-ppc/4xx_pcie.h are used.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5de851403b01489b493fa83137ad990b8ce60d1c
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 26 17:36:39 2008 +0200
+
+ ppc4xx: Rework 440GX UIC handling
+
+ This patch reworks the 440GX interrupt handling so that the common 4xx
+ code can be used. The 440GX is an exception to all other 4xx variants
+ by having the cascading interrupt vectors not on UIC0 but on a special
+ UIC named UICB0 (UIC Base 0). With this patch now, U-Boot references
+ the 440GX UICB0 when UIC0 is selected. And the common 4xx interrupt
+ handling is simpler without any 440GX special cases.
+
+ Also some additional cleanup to cpu/ppc4xx/interrupt.c is done.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d1631fe1a05b063ccaf62ea892a8887b829847d1
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 26 13:40:57 2008 +0200
+
+ ppc4xx: Consolidate PPC4xx UIC defines
+
+ This 2nd patch now removes all UIC mask bit definition. They should be
+ generated from the vectors by using the UIC_MASK() macro from now on.
+ This way only the vectors need to get defined for new PPC's.
+
+ Also only the really used interrupt vectors are now defined. This makes
+ definitions for new PPC versions easier and less error prone.
+
+ Another part of this patch is that the 4xx emac driver got a little
+ cleanup, since now the usage of the interrupts is clearer.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4fb25a3db3b3839094aa9ab748efd7a95924690b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jun 25 10:59:22 2008 +0200
+
+ ppc4xx: Consolidate PPC4xx UIC defines
+
+ This patch is the first step to consolidate the UIC related defines in the
+ 4xx headers. Move header from asm-ppc/ppc4xx-intvec.h to
+ asm-ppc/ppc4xx-uic.h as it will hold all UIC related defines in the next
+ steps.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7ee2619c20ccecd57966d74d844e6329e141261c
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 24 17:18:50 2008 +0200
+
+ ppc4xx: Consolidate PPC4xx EBC defines
+
+ This patch removes all EBC related defines from the PPC4xx headers
+ ppc405.h and ppc440.h and introduces a new header
+
+ include/asm-ppc/ppc4xx-ebc.h
+
+ with all those defines.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e321801bed5a6d896d298c00fd20046f039d5d66
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 13:52:44 2008 +0200
+
+ ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
+
+ This patch removes some ft_board_setup() functions from some 4xx boards.
+ This can be done since we now have a default weak implementation for this
+ in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
+ implementation like canyonlands need their own version.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 08250eb2edbd96514d049602d9e134110ac3185f
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 15:32:32 2008 +0200
+
+ ppc4xx: Fix merge problems in 44x_spd_ddr2.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1740c1bf40e3c6d03ac16c29943fdd9fc1e87038
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Tue Jul 8 08:35:00 2008 -0700
+
+ ppc4xx: Add MII mode support to the EMAC RGMII Bridge
+
+ This patch adds support for placing the RGMII bridge on the
+ PPC405EX(r) into MII/GMII mode and allows a board-specific
+ configuration to specify the bridge mode at compile-time.
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2e2050842e731c823ce8d41fb0c15579eb70ced9
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Wed Jul 9 16:46:35 2008 -0700
+
+ ppc4xx: Add Mnemonics for AMCC/IBM DDR2 SDRAM Controller
+
+ This patch completes the preprocessor mneomics for the IBM DDR2 SDRAM
+ controller registers (MODT and INITPLR) used by the
+ PowerPC405EX(r). The MMODE and MEMODE registers are unified with their
+ peer values used for the INITPLR MR and EMR registers,
+ respectively. Finally, a spelling typo is correct (MANUEL to MANUAL).
+
+ With these mnemonics in place, the CFG_SDRAM0_* magic numbers for
+ Kilauea are replaced by equivalent mnemonics to make it easier to
+ compare and contrast other 405EX(r)-based boards (e.g. during board
+ bring-up).
+
+ Finally, unified the SDRAM controller register dump routine such that
+ it can be used across all processor variants that utilize the IBM DDR2
+ SDRAM controller core. It produces output of the form:
+
+ PPC4xx IBM DDR2 Register Dump:
+ ...
+ SDRAM_MB0CF[40] = 0x00006701
+ ...
+
+ which is '<mnemonic>[<DCR #>] = <value>'. The DCR number is included
+ since it is not uncommon that the DCR values in header files get mixed
+ up and it helps to validate, at a glance, they match what is printed
+ in the user manual.
+
+ Tested on:
+ AMCC Kilauea/Haleakala:
+ - NFS Linux Boot: PASSED
+ - NAND Linux Boot: PASSED
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ad7382d828982e9c1bafc4313ef1b666f6145f58
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Wed Jul 9 16:31:59 2008 -0700
+
+ ppc4xx: Add AMCC/IBM DDR2 SDRAM ECC Field Mnemonics
+
+ Add additional DDR2 SDRAM memory controller DCR mneomnics, condition
+ revision ID DCR based on 405EX, and add field mnemonics for bus error
+ status and ECC error status registers.
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 103201731bd8e85404d0f51a5b4e8abd14c0b6c6
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Wed Jul 9 16:31:36 2008 -0700
+
+ ppc4xx: Add SDR0_SRST Mnemonics for the 405EX(r)
+
+ This patch adds bit field mnemonics for the 405EX(r) SDR0_SRST soft reset register.
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5b457d00730d4aa0c6450d21a9104723e606fb98
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Wed Jul 9 11:55:46 2008 -0700
+
+ PPC4xx: Correct SDRAM_MCSTAT for PPC405EX(r)
+
+ While the PowerPC 405EX(r) shares in common the AMCC/IBM DDR2 SDRAM
+ controller core also used in the 440SP, 440SPe, 460EX, and 460GT, in
+ the 405EX(r), SDRAM_MCSTAT has a different DCR value.
+
+ Its present value on the 405EX(r) causes a read back of 0xFFFFFFFF
+ which causes SDRAM initialization to periodically fail since it can
+ prematurely indicate SDRAM ready status.
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0ce5c8675bb2c61f1d71fb97f0bbe822663fb93d
+Author: Feng Kan <fkan@amcc.com>
+Date: Tue Jul 8 22:48:42 2008 -0700
+
+ ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.
+
+ Add AMCC Redwood reference board that uses the latest
+ PPC 464 CPU processor combined with a rich mix of peripheral
+ controllers. The board will support PCIe, mutiple Gig ethernet
+ ports, advanced hardware RAID assistance and IEEE 1588.
+
+ Signed-off-by: Feng Kan <fkan@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 96e5fc0e6a1861d0fea4efa3cd376df95a5b1b89
+Author: Feng Kan <fkan@amcc.com>
+Date: Tue Jul 8 22:48:07 2008 -0700
+
+ ppc4xx: Add initial 460SX reference board (redwood) config file and defines.
+
+ Signed-off-by: Feng Kan <fkan@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7d30793685efcada183891c78fc892e6c9ba50c7
+Author: Feng Kan <fkan@amcc.com>
+Date: Tue Jul 8 22:47:31 2008 -0700
+
+ ppc4xx: Add initial 460SX defines for the cpu/ppc4xx directory.
+
+ Signed-off-by: Feng Kan <fkan@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 11 01:16:00 2008 +0200
+
+ Fix some more print() format errors.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fdd70d1921b87287d9a99d1be99bc35226c2b412
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jul 10 20:57:54 2008 +0200
+
+ MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c
+Author: Sergey Lapin <slapin@ossfans.org>
+Date: Thu Jun 5 11:06:29 2008 +0400
+
+ DataFlash AT45DB021 support
+
+ Some boards based on AT91SAM926X-EK use smaller DF chips to keep
+ bootstrap, u-boot and its environment, using NAND or other external
+ storage for kernel and rootfs. This patch adds support for
+ small 1024x263 chip.
+
+ Signed-off-by: Sergey Lapin <slapin@ossfans.org>
+
+commit 4109df6f75fc00ab7da56d286ba50149a0d16a69
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Jul 10 14:00:15 2008 -0500
+
+ silence misc printf formatting compiler warnings
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Thu Jul 10 14:47:09 2008 +0200
+
+ USB: shutdown USB before booting
+
+ This patch fixes a potentially serious issue related to USB which was
+ discouvered by Martin Krause <martin.krause@tqs.de> and fixed for
+ ARM920T. Martin wrote:
+
+ Turn off USB to prevent the host controller from writing to the
+ SDRAM while Linux is booting. This could happen, because the HCCA
+ (Host Controller Communication Area) lies within the SDRAM and the
+ host controller writes continously to this area (as busmaster!), for
+ example to increase the HccaFrameNumber variable, which happens
+ every 1 ms.
+
+ This is a slightly modified version of the patch in order to shutdown
+ USB when booting on all architectures.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8
+Author: Martha Marx <mmarx@silicontkx.com>
+Date: Thu May 29 14:23:25 2008 -0400
+
+ Configuration changes for ADS5121 Rev 3
+
+ ADS5121 Rev 3 board is now the default config
+
+ config targets are now
+
+ ads5121_config
+ Rev 3 board with
+ PCI
+ M41T62 on board RTC
+ 512MB DRAM
+
+ ads5121_rev2_config
+ Rev 2 board with
+ No PCI
+ 256MB DRAM
+
+ Signed-off-by: Martha Marx <mmarx@silicontkx.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615
+Author: Martha Marx <mmarx@silicontkx.com>
+Date: Thu May 29 15:37:21 2008 -0400
+
+ Consolidate ADS5121 IO Pin configuration
+
+ Consolidate ADS5121 IO Pin configuration to one file
+ board/ads5121/iopin.c.
+
+ Remove pin config from cpu/mpc512x/fec.c
+
+ Signed-off-by: Martha Marx <mmarx@silicontkx.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7
+Author: Christian Eggers <christian@p2400.wgnetz.xx>
+Date: Fri Jun 27 19:46:51 2008 +0200
+
+ Fix "usb part" command
+
+ Only print partition for selected device if user supplied the <dev>
+ arg with the "usb part [dev]" command.
+
+ Signed-off-by: Christian Eggers <ceggers@gmx.de>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit cc83b27217f7380041fea386ddb6d6d9b261617d
+Author: Harald Welte <laforge@gnumonks.org>
+Date: Mon Jul 7 00:58:05 2008 +0800
+
+ fix USB devices with multiple configurations
+
+ This patch fixes bugs in usbdcore*.c related to the use of devices
+ with multiple configurations.
+
+ The original code made mistakes about the meaning of configuration value and
+ configuration index, and the resulting off-by-one errors resulted in:
+
+ * SET_CONFIGURATION always selected the first configuration, no matter what
+ wValue is being passed.
+ * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
+ configuration (index 0).
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 06c53beae1a726e707971c555613f09b270a2461
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 10 13:16:09 2008 +0200
+
+ Fix some more print() format errors.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d4b5f3fa001228d76e2c3380cedadf804b802c2a
+Author: Christian Eggers <christian@p2400.wgnetz.xx>
+Date: Fri Jun 27 19:46:51 2008 +0200
+
+ Fix "usb part" command
+
+ Only print partition for selected device if user supplied the <dev>
+ arg with the "usb part [dev]" command.
+
+ Signed-off-by: Christian Eggers <ceggers@gmx.de>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit e73b5212e0463a3db0af0a5c95c75bfb762ca973
+Author: Harald Welte <laforge@gnumonks.org>
+Date: Mon Jul 7 00:58:05 2008 +0800
+
+ fix USB devices with multiple configurations
+
+ This patch fixes bugs in usbdcore*.c related to the use of devices
+ with multiple configurations.
+
+ The original code made mistakes about the meaning of configuration value and
+ configuration index, and the resulting off-by-one errors resulted in:
+
+ * SET_CONFIGURATION always selected the first configuration, no matter what
+ wValue is being passed.
+ * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
+ configuration (index 0).
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit e870690bdca154943ecadd5212d2d59c1b9d391b
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 10:10:54 2008 +0200
+
+ MTD/NAND: Fix printf format warning in nand code
+
+ This patch fixes NAND related printf format warning. Those warnings are
+ now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
+ [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
+ really helpful.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 10943c9afa25694bd9999461f4e9e50ce22fff2b
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 10:00:45 2008 +0200
+
+ rtc: Fix printf format warning in m41t60.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 8 12:01:47 2008 +0200
+
+ pci: Move PCI device configuration check into a separate weak function
+
+ This patch moves the check, if a device should be skipped in PCI PNP
+ configuration into the function pci_skip_dev(). This function is defined
+ as weak so that it can be overwritten by a platform specific one if
+ needed. The check if the device should get printed in the PCI summary upon
+ bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function
+ pci_print_dev() which is also defined as weak too.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b002144e1dc21374b1ef5281fe6b5d014af96650
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 09:58:06 2008 +0200
+
+ ppc4xx: Fix printf format warnings now visible with the updated format check
+
+ This patch fixes ppc4xx related printf format warning. Those warnings are
+ now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
+ [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
+ really helpful.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 9 17:33:57 2008 +0200
+
+ ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai
+
+ Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
+ To support such configurations, we "only" map the first 2GB via the TLB's. We
+ need some free virtual address space for the remaining peripherals like, SoC
+ devices, FLASH etc.
+
+ Note that ECC is currently not supported on configurations with more than 2GB
+ SDRAM. This is because we only map the first 2GB on such systems, and therefore
+ the ECC parity byte of the remaining area can't be written.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cf1c2ed91df26903b956948f37f82de9e1158a89
+Author: Larry Johnson <lrj@acm.org>
+Date: Sat Jun 14 17:02:49 2008 -0400
+
+ ppc4xx: Remove implementation of testdram() from Korat board support
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e
+Author: Larry Johnson <lrj@acm.org>
+Date: Sat Jun 14 16:53:02 2008 -0400
+
+ ppc4xx: Update and add FDT to Korat board support
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4188f0491886b3b486164e819c0a83fdb97efd7d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 10 01:13:30 2008 +0200
+
+ Minor coding style cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 8915f1189c1d29d8be7f4de325702d90a8988219
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Wed Jul 9 17:50:45 2008 -0400
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+commit 3473ab737282b08ad61841fcbb14c4d264a93a8e
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Tue May 13 11:50:36 2008 +0800
+
+ Feed the watchdog in u-boot for 8610 board.
+
+ The watchdog on 8610 board is enabled by setting sw[6]
+ to on. Once enabled, the watchdog can not be disabled
+ by software. So feed the dog in u-boot is necessary for
+ normal operation.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
commit 63676841ca2d603b13765f3f7b72ff1a61c23f90
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date: Wed Jun 18 12:10:33 2008 -0400
Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
Acked-by: Felix Radensky <felix@embedded-sol.com>
+commit dd1c5523d6f44e842e69f2fcb50788c6060eab86
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 1 17:03:19 2008 +0200
+
+ ppc4xx: Fix 460EX/GT PCIe port initialization
+
+ This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was
+ configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing
+ this out.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit b571afde0295b007a45055ee49f8822c753a5651
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sat Jun 7 12:29:52 2008 +0200
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
+commit a036b0443657fe0f4773786de9092251869f08ac
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 19 01:45:50 2008 -0500
+
+ MPC8610HPCD: Report board id, board version and fpga version.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 19 01:45:27 2008 -0500
+
+ MPC8641HPCN: Report board id, board version and fpga version.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
Author: Stefan Roese <sr@denx.de>
Date: Mon Jun 16 10:40:02 2008 +0200
Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+commit 6324e5bec8825f7fee3026ffbd394454ae8b53fb
+Author: Christian Eggers <ceggers@gmx.de>
+Date: Wed May 21 21:29:10 2008 +0200
+
+ Fix endianess conversion in usb_ohci.c
+
+ Sorry, I forgot this line:
+
+ Signed-off-by: Christian Eggers <ceggers@gmx.de>
+
+ I think this must be swapped (result may be equal).
+
commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596
Author: Christian Eggers <ceggers@gmx.de>
Date: Wed May 21 22:12:00 2008 +0200
projects / karo-tx-uboot.git / blobdiff