#
VERSION = 2011
-PATCHLEVEL = 09
+PATCHLEVEL = 12
SUBLEVEL =
EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
else
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
endif
-TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
-VERSION_FILE = $(obj)include/version_autogenerated.h
+TIMESTAMP_FILE = $(obj)include/generated/timestamp_autogenerated.h
+VERSION_FILE = $(obj)include/generated/version_autogenerated.h
HOSTARCH := $(shell uname -m | \
sed -e s/i.86/x86/ \
# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
-SUBDIRS = tools
+# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
+# is "yes"), so compile examples after U-Boot is compiled.
+SUBDIR_TOOLS = tools
+SUBDIR_EXAMPLES = examples/standalone examples/api
+SUBDIRS = $(SUBDIR_TOOLS)
.PHONY : $(SUBDIRS) $(VERSION_FILE) $(TIMESTAMP_FILE)
sinclude $(obj)include/autoconf.mk.dep
sinclude $(obj)include/autoconf.mk
+ifndef CONFIG_SANDBOX
+SUBDIRS += $(SUBDIR_EXAMPLES)
+endif
+
# load ARCH, BOARD, and CPU configuration
include $(obj)include/config.mk
export ARCH CPU BOARD VENDOR SOC
-ifndef CONFIG_SANDBOX
-SUBDIRS += examples/standalone \
- examples/api
-endif
-
# set default to nothing for native builds
ifeq ($(HOSTARCH),$(ARCH))
CROSS_COMPILE ?=
ifeq ($(CPU),ixp)
LIBS += arch/arm/cpu/ixp/npe/libnpe.o
endif
+ifeq ($(CONFIG_OF_EMBED),y)
+LIBS += dts/libdts.o
+endif
LIBS += arch/$(ARCH)/lib/lib$(ARCH).o
LIBS += fs/cramfs/libcramfs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o \
fs/reiserfs/libreiserfs.o fs/ext2/libext2fs.o fs/yaffs2/libyaffs2.o \
endif
LIBS += drivers/rtc/librtc.o
LIBS += drivers/serial/libserial.o
+ifeq ($(CONFIG_GENERIC_LPC_TPM),y)
+LIBS += drivers/tpm/libtpm.o
+endif
LIBS += drivers/twserial/libtws.o
LIBS += drivers/usb/eth/libusb_eth.o
LIBS += drivers/usb/gadget/libusb_gadget.o
LIBS += drivers/usb/host/libusb_host.o
LIBS += drivers/usb/musb/libusb_musb.o
LIBS += drivers/usb/phy/libusb_phy.o
+LIBS += drivers/usb/ulpi/libusb_ulpi.o
LIBS += drivers/video/libvideo.o
LIBS += drivers/watchdog/libwatchdog.o
LIBS += common/libcommon.o
LIBS += api/libapi.o
LIBS += post/libpost.o
-ifeq ($(SOC),omap3)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
LIBS += $(CPUDIR)/omap-common/libomap-common.o
endif
-ifeq ($(SOC),omap4)
-LIBS += $(CPUDIR)/omap-common/libomap-common.o
+
+ifeq ($(SOC),mx5)
+LIBS += $(CPUDIR)/imx-common/libimx-common.o
+endif
+ifeq ($(SOC),mx6)
+LIBS += $(CPUDIR)/imx-common/libimx-common.o
endif
ifeq ($(SOC),s5pc1xx)
LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
endif
-ifeq ($(SOC),s5pc2xx)
+ifeq ($(SOC),exynos)
LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
endif
PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
endif
else
-PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
+PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
endif
PLATFORM_LIBS += $(PLATFORM_LIBGCC)
export PLATFORM_LIBS
ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
ALL-$(CONFIG_MMC_U_BOOT) += $(obj)mmc_spl/u-boot-mmc-spl.bin
ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
+ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
+
+all: $(ALL-y) $(SUBDIR_EXAMPLES)
-all: $(ALL-y)
+$(obj)u-boot.dtb: $(obj)u-boot
+ $(MAKE) -C dts binary
+ mv $(obj)dts/dt.dtb $@
+
+$(obj)u-boot-dtb.bin: $(obj)u-boot.bin $(obj)u-boot.dtb
+ cat $^ >$@
$(obj)u-boot.hex: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
-$(obj)u-boot.ubl: $(obj)u-boot-nand.bin
+$(obj)u-boot.ubl: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
+ cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $(obj)u-boot-ubl.bin
$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
- -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
+ -e $(CONFIG_SYS_TEXT_BASE) -d $(obj)u-boot-ubl.bin $(obj)u-boot.ubl
+ rm $(obj)u-boot-ubl.bin
+ rm $(obj)spl/u-boot-spl-pad.bin
+
+$(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+ $(obj)tools/mkimage -s -n /dev/null -T aisimage \
+ -e $(CONFIG_SPL_TEXT_BASE) \
+ -d $(obj)spl/u-boot-spl.bin \
+ $(obj)spl/u-boot-spl.ais
+ $(OBJCOPY) ${OBJCFLAGS} -I binary \
+ --pad-to=$(CONFIG_SPL_MAX_SIZE) -O binary \
+ $(obj)spl/u-boot-spl.ais $(obj)spl/u-boot-spl-pad.ais
+ cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.bin > \
+ $(obj)u-boot.ais
+ rm $(obj)spl/u-boot-spl{,-pad}.ais
+
+$(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
+ elftosb -zdf imx28 -c $(TOPDIR)/board/$(BOARDDIR)/u-boot.bd \
+ -o $(obj)u-boot.sb
ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT = \
endif
$(obj)u-boot: depend \
- $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
+ $(SUBDIR_TOOLS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
$(GEN_UBOOT)
ifeq ($(CONFIG_KALLSYMS),y)
smap=`$(call SYSTEM_MAP,u-boot) | \
$(OBJS): depend
$(MAKE) -C $(CPUDIR) $(if $(REMOTE_BUILD),$@,$(notdir $@))
-$(LIBS): depend $(SUBDIRS)
+$(LIBS): depend $(SUBDIR_TOOLS)
$(MAKE) -C $(dir $(subst $(obj),,$@))
$(LIBBOARD): depend $(LIBS)
$(SUBDIRS): depend
$(MAKE) -C $@ all
+$(SUBDIR_EXAMPLES): $(obj)u-boot
+
$(LDSCRIPT): depend
$(MAKE) -C $(dir $@) $(notdir $@)
$(obj)mmc_spl/u-boot-mmc-spl.bin: mmc_spl
-$(obj)spl/u-boot-spl.bin: depend
+$(obj)spl/u-boot-spl.bin: $(SUBDIR_TOOLS) depend
$(MAKE) -C spl all
updater:
@$(XECHO) Generating $@ ; \
set -e ; \
: Generate the dependancies ; \
- $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
+ $(CC) -x c -DDO_DEPS_ONLY -M $(CFLAGS) $(CPPFLAGS) \
-MQ $(obj)include/autoconf.mk include/common.h > $@
$(obj)include/autoconf.mk: $(obj)include/config.h
sinclude $(obj).boards.depend
$(obj).boards.depend: boards.cfg
- awk '(NF && $$1 !~ /^#/) { print $$1 ": " $$1 "_config; $$(MAKE)" }' $< > $@
+ @awk '(NF && $$1 !~ /^#/) { print $$1 ": " $$1 "_config; $$(MAKE)" }' $< > $@
#
# Functions to generate common board directory names
lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
-#########################################################################
-## Coldfire
-#########################################################################
-
-astro_mcf5373l_config \
-astro_mcf5373l_RAM_config : unconfig
- @$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro
-
-M52277EVB_config \
-M52277EVB_spansion_config \
-M52277EVB_stmicro_config : unconfig
- @case "$@" in \
- M52277EVB_config) FLASH=SPANSION;; \
- M52277EVB_spansion_config) FLASH=SPANSION;; \
- M52277EVB_stmicro_config) FLASH=STMICRO;; \
- esac; \
- if [ "$${FLASH}" = "SPANSION" ] ; then \
- echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
- echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
- cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
- fi; \
- if [ "$${FLASH}" = "STMICRO" ] ; then \
- echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
- echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
- echo "CONFIG_SYS_TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
- cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
- fi
- @$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale
-
-M5235EVB_config \
-M5235EVB_Flash16_config \
-M5235EVB_Flash32_config: unconfig
- @case "$@" in \
- M5235EVB_config) FLASH=16;; \
- M5235EVB_Flash16_config) FLASH=16;; \
- M5235EVB_Flash32_config) FLASH=32;; \
- esac; \
- if [ "$${FLASH}" != "16" ] ; then \
- echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \
- echo "CONFIG_SYS_TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
- cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
- else \
- echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
- cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
- fi
- @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale
-
-cobra5272_config : unconfig
- @$(MKCONFIG) $@ m68k mcf52x2 cobra5272
-
-EB+MCF-EV123_config : unconfig
- @mkdir -p $(obj)include
- @mkdir -p $(obj)board/BuS/EB+MCF-EV123
- @echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
- @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
-
-EB+MCF-EV123_internal_config : unconfig
- @mkdir -p $(obj)include
- @mkdir -p $(obj)board/BuS/EB+MCF-EV123
- @echo "CONFIG_SYS_TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
- @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
-
-M5329AFEE_config \
-M5329BFEE_config : unconfig
- @case "$@" in \
- M5329AFEE_config) NAND=0;; \
- M5329BFEE_config) NAND=16;; \
- esac; \
- if [ "$${NAND}" != "0" ] ; then \
- echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
- fi
- @$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale
-
-M5373EVB_config : unconfig
- @case "$@" in \
- M5373EVB_config) NAND=16;; \
- esac; \
- if [ "$${NAND}" != "0" ] ; then \
- echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
- fi
- @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
-
-M54451EVB_config \
-M54451EVB_stmicro_config : unconfig
- @case "$@" in \
- M54451EVB_config) FLASH=NOR;; \
- M54451EVB_stmicro_config) FLASH=STMICRO;; \
- esac; \
- if [ "$${FLASH}" = "NOR" ] ; then \
- echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
- cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
- fi; \
- if [ "$${FLASH}" = "STMICRO" ] ; then \
- echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
- echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
- echo "CONFIG_SYS_TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
- cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
- fi; \
- echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
- @$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale
-
-M54455EVB_config \
-M54455EVB_atmel_config \
-M54455EVB_intel_config \
-M54455EVB_a33_config \
-M54455EVB_a66_config \
-M54455EVB_i33_config \
-M54455EVB_i66_config \
-M54455EVB_stm33_config : unconfig
- @case "$@" in \
- M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \
- M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \
- M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \
- M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \
- M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \
- M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \
- M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \
- M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \
- esac; \
- if [ "$${FLASH}" = "INTEL" ] ; then \
- echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
- echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
- cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
- fi; \
- if [ "$${FLASH}" = "ATMEL" ] ; then \
- echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \
- echo "CONFIG_SYS_TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
- cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
- fi; \
- if [ "$${FLASH}" = "STMICRO" ] ; then \
- echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
- echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
- echo "CONFIG_SYS_TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
- cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
- fi; \
- echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
- $(XECHO) "... with $${FREQ}Hz input clock"
- @$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale
-
-M5475AFE_config \
-M5475BFE_config \
-M5475CFE_config \
-M5475DFE_config \
-M5475EFE_config \
-M5475FFE_config \
-M5475GFE_config : unconfig
- @case "$@" in \
- M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
- M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
- M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
- M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
- M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
- M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
- M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
- esac; \
- echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
- echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
- echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
- if [ "$${RAM1}" != "0" ] ; then \
- echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
- fi; \
- if [ "$${CODE}" != "0" ] ; then \
- echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
- fi; \
- if [ "$${VID}" == "1" ] ; then \
- echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
- fi; \
- if [ "$${USB}" == "1" ] ; then \
- echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
- fi
- @$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale
-
-M5485AFE_config \
-M5485BFE_config \
-M5485CFE_config \
-M5485DFE_config \
-M5485EFE_config \
-M5485FFE_config \
-M5485GFE_config \
-M5485HFE_config : unconfig
- @case "$@" in \
- M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
- M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
- M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
- M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
- M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
- M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
- M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
- M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
- esac; \
- echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
- echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
- echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
- if [ "$${RAM1}" != "0" ] ; then \
- echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
- fi; \
- if [ "$${CODE}" != "0" ] ; then \
- echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
- fi; \
- if [ "$${VID}" == "1" ] ; then \
- echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
- fi; \
- if [ "$${USB}" == "1" ] ; then \
- echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
- fi
- @$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale
-
#========================================================================
# ARM
#========================================================================
-xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
-
-omap1610inn_config \
-omap1610inn_cs0boot_config \
-omap1610inn_cs3boot_config \
-omap1610inn_cs_autoboot_config \
-omap1610h2_config \
-omap1610h2_cs0boot_config \
-omap1610h2_cs3boot_config \
-omap1610h2_cs_autoboot_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _cs0boot_, $@)" ] ; then \
- echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
- elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
- echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
- else \
- echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
-
-omap730p2_config \
-omap730p2_cs0boot_config \
-omap730p2_cs3boot_config : unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _cs0boot_, $@)" ] ; then \
- echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
- else \
- echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap
-
-spear300_config \
-spear310_config \
-spear320_config : unconfig
- @$(MKCONFIG) -n $@ -t $@ spear3xx arm arm926ejs $(@:_config=) spear spear
-
-spear600_config : unconfig
- @$(MKCONFIG) -n $@ -t $@ spear6xx arm arm926ejs $(@:_config=) spear spear
-
SX1_stdout_serial_config \
SX1_config: unconfig
@mkdir -p $(obj)include
fi
@$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive
-#########################################################################
-## ARM1136 Systems
-#########################################################################
-
-apollon_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
- @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
- @$(MKCONFIG) $@ arm arm1136 apollon - omap24xx
-
#########################################################################
## ARM1176 Systems
#########################################################################
$(obj)tools/envcrc \
$(obj)tools/gdb/{astest,gdbcont,gdbsend} \
$(obj)tools/gen_eth_addr $(obj)tools/img2srec \
- $(obj)tools/mkimage $(obj)tools/mpc86x_clk \
+ $(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \
+ $(obj)tools/mk{smdk5250,}spl \
$(obj)tools/ncb $(obj)tools/ubsha1
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/matrix_vision/*/bootscript.img \
$(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \
$(obj)arch/blackfin/cpu/init.{lds,elf}
@rm -f $(obj)include/bmp_logo.h
+ @rm -f $(obj)include/bmp_logo_data.h
@rm -f $(obj)lib/asm-offsets.s
@rm -f $(obj)include/generated/asm-offsets.h
@rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
@rm -f $(ONENAND_BIN)
@rm -f $(obj)onenand_ipl/u-boot.lds
@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map}
+ @rm -f $(obj)MLO
@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
@find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
-o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \
| xargs rm -f
-clobber: clean
- @find $(OBJTREE) -type f \( -name '*.depend*' \
- -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
- -print0 \
- | xargs -0 rm -f
+# Removes everything not needed for testing u-boot
+tidy: clean
+ @find $(OBJTREE) -type f \( -name '*.depend*' \) -print | xargs rm -f
+
+clobber: tidy
+ @find $(OBJTREE) -type f \( -name '*.srec' \
+ -o -name '*.bin' -o -name u-boot.img \) \
+ -print0 | xargs -0 rm -f
@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
$(obj)cscope.* $(obj)*.*~
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL-y)
@rm -f $(obj)u-boot.kwb
@rm -f $(obj)u-boot.imx
@rm -f $(obj)u-boot.ubl
- @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
+ @rm -f $(obj)u-boot.ais
+ @rm -f $(obj)u-boot.dtb
+ @rm -f $(obj)u-boot.sb
+ @rm -f $(obj)tools/inca-swap-bytes
@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
+ @rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c
@rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@rm -fr $(obj)include/generated
@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
@[ ! -d $(obj)mmc_spl ] || find $(obj)mmc_spl -name "*" -type l -print | xargs rm -f
+ @rm -f $(obj)dts/*.tmp
mrproper \
distclean: clobber unconfig
projects / karo-tx-uboot.git / blobdiff