VERSION = 1
PATCHLEVEL = 3
-SUBLEVEL = 0
-EXTRAVERSION = -rc3
+SUBLEVEL = 1
+EXTRAVERSION =
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h
ifeq ($(ARCH),avr32)
CROSS_COMPILE = avr32-linux-
endif
+ifeq ($(ARCH),sh)
+CROSS_COMPILE = sh4-linux-
+endif
endif
endif
fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
-LIBS += rtc/librtc.a
-LIBS += dtt/libdtt.a
-LIBS += drivers/libdrivers.a
LIBS += drivers/bios_emulator/libatibiosemu.a
-LIBS += drivers/nand/libnand.a
-LIBS += drivers/nand_legacy/libnand_legacy.a
-LIBS += drivers/onenand/libonenand.a
+LIBS += drivers/block/libblock.a
+LIBS += drivers/hwmon/libhwmon.a
+LIBS += drivers/i2c/libi2c.a
+LIBS += drivers/input/libinput.a
+LIBS += drivers/misc/libmisc.a
+LIBS += drivers/mtd/libmtd.a
+LIBS += drivers/mtd/nand/libnand.a
+LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
+LIBS += drivers/mtd/onenand/libonenand.a
LIBS += drivers/net/libnet.a
+LIBS += drivers/net/sk98lin/libsk98lin.a
+LIBS += drivers/pci/libpci.a
+LIBS += drivers/pcmcia/libpcmcia.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
endif
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/qe.a
endif
+LIBS += drivers/rtc/librtc.a
LIBS += drivers/serial/libserial.a
-LIBS += drivers/sk98lin/libsk98lin.a
+LIBS += drivers/usb/libusb.a
+LIBS += drivers/video/libvideo.a
LIBS += post/libpost.a post/drivers/libpostdrivers.a
LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
"post/lib_$(ARCH)/libpost$(ARCH).a"; fi)
"post/board/$(BOARDDIR)/libpost$(BOARD).a"; fi)
LIBS += common/libcommon.a
LIBS += libfdt/libfdt.a
+ifeq ($(CONFIG_API),y)
+LIBS += api/libapi.a
+endif
LIBS := $(addprefix $(obj),$(LIBS))
.PHONY : $(LIBS)
SUBDIRS = tools \
examples
+ifeq ($(CONFIG_API),y)
+SUBDIRS += api_examples
+endif
+
.PHONY : $(SUBDIRS)
ifeq ($(CONFIG_NAND_U_BOOT),y)
$(MAKE) -C tools/updater all || exit 1
env:
- $(MAKE) -C tools/env all || exit 1
+ $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
depend dep: version
for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
+TAG_SUBDIRS += include
+TAG_SUBDIRS += lib_generic board/$(BOARDDIR)
+TAG_SUBDIRS += cpu/$(CPU)
+TAG_SUBDIRS += lib_$(ARCH)
+TAG_SUBDIRS += fs/cramfs
+TAG_SUBDIRS += fs/fat
+TAG_SUBDIRS += fs/fdos
+TAG_SUBDIRS += fs/jffs2
+TAG_SUBDIRS += net
+TAG_SUBDIRS += disk
+TAG_SUBDIRS += common
+TAG_SUBDIRS += drivers/bios_emulator
+TAG_SUBDIRS += drivers/block
+TAG_SUBDIRS += drivers/hwmon
+TAG_SUBDIRS += drivers/i2c
+TAG_SUBDIRS += drivers/input
+TAG_SUBDIRS += drivers/misc
+TAG_SUBDIRS += drivers/mtd
+TAG_SUBDIRS += drivers/mtd/nand
+TAG_SUBDIRS += drivers/mtd/nand_legacy
+TAG_SUBDIRS += drivers/mtd/onenand
+TAG_SUBDIRS += drivers/net
+TAG_SUBDIRS += drivers/net/sk98lin
+TAG_SUBDIRS += drivers/pci
+TAG_SUBDIRS += drivers/pcmcia
+TAG_SUBDIRS += drivers/qe
+TAG_SUBDIRS += drivers/rtc
+TAG_SUBDIRS += drivers/serial
+TAG_SUBDIRS += drivers/usb
+TAG_SUBDIRS += drivers/video
+
tags ctags:
- ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) include \
- lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
- fs/cramfs fs/fat fs/fdos fs/jffs2 \
- net disk rtc dtt drivers drivers/sk98lin common \
- \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
+ ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \
+ -name '*.[ch]' -print`
etags:
- etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) include \
- lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
- fs/cramfs fs/fat fs/fdos fs/jffs2 \
- net disk rtc dtt drivers drivers/sk98lin common \
- \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
+ etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) $(TAG_SUBDIRS) \
+ -name '*.[ch]' -print`
$(obj)System.map: $(obj)u-boot
@$(NM) $< | \
grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
sort > $(obj)System.map
+#
+# Auto-generate the autoconf.mk file (which is included by all makefiles)
+#
+# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
+# the dep file is only include in this top level makefile to determine when
+# to regenerate the autoconf.mk file.
+$(OBJTREE)/include/autoconf.mk: $(obj)include/config.h
+ @echo Generating include/autoconf.mk
+ @# Generate the dependancies
+ @$(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -MQ $@ include/common.h > $@.dep
+ @# Extract the config macros
+ @$(CPP) $(CFLAGS) -dM include/common.h | sed -n -f tools/scripts/define2mk.sed >> $@
+
+sinclude $(OBJTREE)/include/autoconf.mk.dep
+
#########################################################################
else
all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
unconfig:
@rm -f $(obj)include/config.h $(obj)include/config.mk \
- $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp
+ $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
+ $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
#========================================================================
# PowerPC
cpci5200_config: unconfig
@$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
-hmi1001_config: unconfig
+hmi1001_config: unconfig
@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
Lite5200_config \
}
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
-jupiter_config: unconfig
+jupiter_config: unconfig
@$(MKCONFIG) jupiter ppc mpc5xxx jupiter
v38b_config: unconfig
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
}
@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
-uc101_config: unconfig
+uc101_config: unconfig
@$(MKCONFIG) uc101 ppc mpc5xxx uc101
-motionpro_config: unconfig
+motionpro_config: unconfig
@$(MKCONFIG) motionpro ppc mpc5xxx motionpro
RPXlite_DW_NVRAM_64_config \
RPXlite_DW_NVRAM_LCD_config \
RPXlite_DW_NVRAM_64_LCD_config \
-RPXlite_DW_config: unconfig
+RPXlite_DW_config: unconfig
@mkdir -p $(obj)include
@ >$(obj)include/config.h
@[ -z "$(findstring _64,$@)" ] || \
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
@echo "BOARD_REVISION = $(@:_config=)" >> $(obj)include/config.mk
-CPCI440_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci440 esd
-
CPCIISER4_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
katmai_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
+# Kilauea & Haleakala images are identical (recognized via PVR)
+kilauea_config \
+haleakala_config: unconfig
+ @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
+
+kilauea_nand_config \
+haleakala_nand_config: unconfig
+ @mkdir -p $(obj)include $(obj)board/amcc/kilauea
+ @mkdir -p $(obj)nand_spl/board/amcc/kilauea
+ @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
+ @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
+korat_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
+
luan_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
lwmon5_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
+makalu_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
+
METROBOX_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
PMC405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
+PMC440_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
+
PPChameleonEVB_config \
PPChameleonEVB_BA_25_config \
PPChameleonEVB_ME_25_config \
fi; \
echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \
echo "... with $${CFREQ}MHz system clock" ; \
- if [ "$${CACHE}" == "yes" ] ; then \
+ if [ "$${CACHE}" = "yes" ] ; then \
echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
echo "... with L2 Cache support" ; \
else \
echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
echo "... without L2 Cache support" ; \
fi; \
- if [ "$${BMODE}" == "60x" ] ; then \
+ if [ "$${BMODE}" = "60x" ] ; then \
echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
echo "... with 60x Bus Mode" ; \
else \
M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \
esac; \
>include/config.h ; \
- if [ "$${FLASH}" == "INTEL" ] ; then \
+ if [ "$${FLASH}" = "INTEL" ] ; then \
echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
+ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+ cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
echo "... with INTEL boot..." ; \
else \
echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
+ echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+ cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
echo "... with ATMEL boot..." ; \
fi; \
echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
MPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \
MPC832XEMDS_HOST_66_config \
-MPC832XEMDS_SLAVE_config: unconfig
+MPC832XEMDS_SLAVE_config \
+MPC832XEMDS_ATM_config: unconfig
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
if [ "$(findstring _33_,$@)" ] ; then \
echo -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
echo -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+ fi ; \
+ if [ "$(findstring _ATM_,$@)" ] ; then \
+ echo -n "...ATM..." ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
MPC8360EMDS_config \
MPC8360EMDS_HOST_33_config \
MPC8360EMDS_HOST_66_config \
-MPC8360EMDS_SLAVE_config: unconfig
+MPC8360EMDS_SLAVE_config \
+MPC8360EMDS_ATM_config: unconfig
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
if [ "$(findstring _33_,$@)" ] ; then \
echo -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
echo -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+ fi ; \
+ if [ "$(findstring _ATM_,$@)" ] ; then \
+ echo -n "...ATM..." ; \
+ echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
+MPC837XEMDS_config \
+MPC837XEMDS_HOST_config: unconfig
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
+ if [ "$(findstring _HOST_,$@)" ] ; then \
+ echo -n "... PCI HOST " ; \
+ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+ fi ;
+ @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
+
sbc8349_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
## MPC85xx Systems
#########################################################################
+ATUM8548_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
+
MPC8540ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
MPC8540EVAL_config \
MPC8540EVAL_33_config \
@$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
MPC8560ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
MPC8541CDS_legacy_config \
MPC8541CDS_config: unconfig
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
echo "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds cds
+ @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
MPC8544DS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
echo "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds cds
+ @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
MPC8555CDS_legacy_config \
MPC8555CDS_config: unconfig
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
echo "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds cds
+ @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
MPC8568MDS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
PM854_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
fi
@$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560
+sbc8548_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548
+
sbc8560_config \
sbc8560_33_config \
sbc8560_66_config: unconfig
## MPC86xx Systems
#########################################################################
+MPC8610HPCD_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
+
MPC8641HPCN_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
BAB7xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
-CPCI750_config: unconfig
+CPCI750_config: unconfig
@$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
-DB64360_config: unconfig
+DB64360_config: unconfig
@$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
-DB64460_config: unconfig
+DB64460_config: unconfig
@$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
ELPPC_config: unconfig
#########################################################################
## ARM1136 Systems
#########################################################################
-omap2420h4_config : unconfig
+omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4
+apollon_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm1136 apollon
+
#========================================================================
# i386
#========================================================================
#########################################################################
atstk1002_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+atstk1003_config : unconfig
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+atstk1004_config : unconfig
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+#########################################################################
+#########################################################################
+#########################################################################
+
+#########################################################################
+## sh4 (Renesas SuperH)
+#########################################################################
+ms7750se_config: unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_MS7750SE 1" >> include/config.h
+ @./mkconfig -a $(@:_config=) sh sh4 ms7750se
+
+ms7722se_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_MS7722SE 1" >> include/config.h
+ @./mkconfig -a $(@:_config=) sh sh4 ms7722se
#########################################################################
#########################################################################
rm -f $(obj)board/bf537-stamp/u-boot.lds $(obj)board/bf561-ezkit/u-boot.lds
rm -f $(obj)include/bmp_logo.h
rm -f $(obj)nand_spl/u-boot-spl $(obj)nand_spl/u-boot-spl.map
+ rm -f $(obj)api_examples/demo
clobber: clean
find $(OBJTREE) -type f \( -name .depend \
rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c
rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
[ ! -d $(OBJTREE)/nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f
+ find $(obj)api_examples -lname "*" -print | xargs rm -f
+ rm -f $(obj)api_examples/demo
ifeq ($(OBJTREE),$(SRCTREE))
mrproper \
projects / karo-tx-uboot.git / blobdiff