#
-# (C) Copyright 2000-2008
+# (C) Copyright 2000-2009
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
#
VERSION = 2009
-PATCHLEVEL = 01
+PATCHLEVEL = 03
SUBLEVEL =
EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
LIBS = lib_generic/libgeneric.a
LIBS += lib_generic/lzma/liblzma.a
+LIBS += lib_generic/lzo/liblzo.a
LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
"board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
LIBS += cpu/$(CPU)/lib$(CPU).a
endif
LIBS += lib_$(ARCH)/lib$(ARCH).a
LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
- fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a
+ fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
+ fs/ubifs/libubifs.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += drivers/bios_emulator/libatibiosemu.a
endif
LIBS += drivers/rtc/librtc.a
LIBS += drivers/serial/libserial.a
-LIBS += drivers/usb/libusb.a
+LIBS += drivers/twserial/libtws.a
+LIBS += drivers/usb/gadget/libusb_gadget.a
+LIBS += drivers/usb/host/libusb_host.a
+LIBS += drivers/usb/musb/libusb_musb.a
LIBS += drivers/video/libvideo.a
+LIBS += drivers/watchdog/libwatchdog.a
LIBS += common/libcommon.a
LIBS += libfdt/libfdt.a
LIBS += api/libapi.a
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(obj)u-boot.ldr: $(obj)u-boot
- $(LDR) -T $(CONFIG_BFIN_CPU) -f -c $@ $< $(LDR_FLAGS)
+ $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
-$(OBJS): depend $(obj)include/autoconf.mk
+$(OBJS): depend
$(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
-$(LIBS): depend $(obj)include/autoconf.mk $(SUBDIRS)
+$(LIBS): depend $(SUBDIRS)
$(MAKE) -C $(dir $(subst $(obj),,$@))
-$(LIBBOARD): depend $(LIBS) $(obj)include/autoconf.mk
+$(LIBBOARD): depend $(LIBS)
$(MAKE) -C $(dir $(subst $(obj),,$@))
-$(SUBDIRS): depend $(obj)include/autoconf.mk
+$(SUBDIRS): depend
$(MAKE) -C $@ all
-$(LDSCRIPT): depend $(obj)include/autoconf.mk
+$(LDSCRIPT): depend
$(MAKE) -C $(dir $@) $(notdir $@)
$(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
$(MAKE) -C nand_spl/board/$(BOARDDIR) all
-$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
+$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
$(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
-$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
+$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin
cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin
env:
$(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
-depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE)
+depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
TAG_SUBDIRS += include
cpci5200_config: unconfig
@$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
+digsy_mtc_config \
+digsy_mtc_LOWBOOT_config \
+digsy_mtc_RAMBOOT_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/digsy_mtc
+ @ >$(obj)include/config.h
+ @[ -z "$(findstring LOWBOOT_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
+ echo "... with LOWBOOT configuration" ; \
+ }
+ @[ -z "$(findstring RAMBOOT_,$@)" ] || \
+ { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
+ echo "... with RAMBOOT configuration" ; \
+ }
+ @$(MKCONFIG) -a digsy_mtc ppc mpc5xxx digsy_mtc
+
hmi1001_config: unconfig
@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
}
@$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
+kmsupx4_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
+
KUP4K_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
mgsuvd_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd keymile
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
MHPC_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
MPC8568MDS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
+MPC8569MDS_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8569mds freescale
+
MPC8572DS_36BIT_config \
MPC8572DS_config: unconfig
@mkdir -p $(obj)include
TQM8540_config \
TQM8541_config \
TQM8548_config \
+TQM8548_AG_config \
+TQM8548_BE_config \
TQM8555_config \
TQM8560_config: unconfig
@mkdir -p $(obj)include
- @CTYPE=$(subst TQM,,$(@:_config=)); \
- $(XECHO) "... TQM"$${CTYPE}; \
+ @BTYPE=$(@:_config=); \
+ CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
+ $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
- echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
+ echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
- echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;
+ echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
+ @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
XPEDITE5200_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
at91rm9200dk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
+at91rm9200ek_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200
+
cmc_pu2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
at91sam9260ek_nandflash_config \
at91sam9260ek_dataflash_cs0_config \
at91sam9260ek_dataflash_cs1_config \
-at91sam9260ek_config : unconfig
- @mkdir -p $(obj)include
+at91sam9260ek_config \
+at91sam9g20ek_nandflash_config \
+at91sam9g20ek_dataflash_cs0_config \
+at91sam9g20ek_dataflash_cs1_config \
+at91sam9g20ek_config : unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring 9g20,$@)" ] ; then \
+ echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... 9G20 Variant" ; \
+ else \
+ echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \
+ fi;
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in NAND FLASH" ; \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
fi;
- @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9
+ @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
at91sam9261ek_nandflash_config \
at91sam9261ek_dataflash_cs0_config \
fi;
@$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
+pm9263_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
+
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
integratorap_config \
ap920t_config \
ap926ejs_config \
ap946es_config: unconfig
- @board/integratorap/split_by_variant.sh $@
+ @board/armltd/integratorap/split_by_variant.sh $@
integratorcp_config \
cp_config \
cp922_config \
cp922_XA10_config \
cp1026_config: unconfig
- @board/integratorcp/split_by_variant.sh $@
+ @board/armltd/integratorcp/split_by_variant.sh $@
davinci_dvevm_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
netstar_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t netstar
+nmdk8815_config \
+nmdk8815_onenand_config: unconfig
+ @mkdir -p $(obj)include
+ @ > $(obj)include/config.h
+ @if [ "$(findstring _onenand, $@)" ] ; then \
+ echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
+ $(XECHO) "... configured for OneNand Flash"; \
+ else \
+ $(XECHO) "... configured for Nand Flash"; \
+ fi
+ @$(MKCONFIG) -a nmdk8815 arm arm926ejs nmdk8815 st nomadik
+
omap1510inn_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
@$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
smdk2400_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
smdk2410_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
-SX1_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm925t sx1
+SX1_stdout_serial_config \
+SX1_config: unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
+ echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
+ $(XECHO) "... configured for stdout serial"; \
+ else \
+ echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
+ $(XECHO) "... configured for stdout usbtty"; \
+ fi;
+ @$(MKCONFIG) SX1 arm arm925t sx1
# TRAB default configuration: 8 MB Flash, 32 MB RAM
xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
versatile_config \
versatileab_config \
versatilepb_config : unconfig
- @board/versatile/split_by_variant.sh $@
+ @board/armltd/versatile/split_by_variant.sh $@
voiceblue_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
@$(MKCONFIG) $(@:_config=) arm arm720t modnet50
evb4510_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t evb4510
+ @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b
lpc2292sodimm_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
SMN42_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
+#########################################################################
+## ARM CORTEX Systems
+#########################################################################
+
+omap3_beagle_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3
+
+omap3_overo_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo omap3 omap3
+
+omap3_evm_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm omap3 omap3
+
+omap3_pandora_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora omap3 omap3
+
+omap3_zoom1_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 omap3 omap3
+
#########################################################################
## XScale Systems
#########################################################################
imx31_litekit_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31
+imx31_phycore_eet_config \
imx31_phycore_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31
+ @mkdir -p $(obj)include
+ @if [ -n "$(findstring _eet_,$@)" ]; then \
+ echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \
+ fi
+ @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
mx31ads_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
+qong_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
+
+
#########################################################################
## ARM1176 Systems
#########################################################################
tb0229_config: unconfig
@$(MKCONFIG) $(@:_config=) mips mips tb0229
+vct_premium_config \
+vct_premium_small_config \
+vct_premium_onenand_config \
+vct_premium_onenand_small_config \
+vct_platinum_config \
+vct_platinum_small_config \
+vct_platinum_onenand_config \
+vct_platinum_onenand_small_config \
+vct_platinumavc_config \
+vct_platinumavc_small_config \
+vct_platinumavc_onenand_config \
+vct_platinumavc_onenand_small_config: unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring _premium,$@)" ] ; then \
+ echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \
+ $(XECHO) "... on Premium board variant" ; \
+ fi
+ @if [ "$(findstring _platinum_,$@)" ] ; then \
+ echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \
+ $(XECHO) "... on Platinum board variant" ; \
+ fi
+ @if [ "$(findstring _platinumavc,$@)" ] ; then \
+ echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \
+ $(XECHO) "... on PlatinumAVC board variant" ; \
+ fi
+ @if [ "$(findstring _onenand,$@)" ] ; then \
+ echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \
+ $(XECHO) "... on OneNAND board variant" ; \
+ fi
+ @if [ "$(findstring _small,$@)" ] ; then \
+ echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \
+ $(XECHO) "... stripped down image variant" ; \
+ fi
+ @$(MKCONFIG) -a vct mips mips vct micronas
+
#########################################################################
## MIPS32 AU1X00
#########################################################################
#========================================================================
# Analog Devices boards
-BFIN_BOARDS = bf533-ezkit bf533-stamp bf537-stamp bf561-ezkit
+BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
+ bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit
$(BFIN_BOARDS:%=%_config) : unconfig
@$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
#########################################################################
rsk7203_config: unconfig
@mkdir -p $(obj)include
- @echo "#define CONFIG_RSK7203 1" > $(obj)/include/config.h
+ @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
#########################################################################
@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
+xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
+sh7785lcr_32bit_config \
sh7785lcr_config : unconfig
@ >include/config.h
@echo "#define CONFIG_SH7785LCR 1" >> include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr renesas
+ @if [ "$(findstring 32bit, $@)" ] ; then \
+ echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
+ cp $(obj)board/renesas/sh7785lcr/u-boot_32bit \
+ $(obj)board/renesas/sh7785lcr/u-boot.lds ; \
+ echo "TEXT_BASE = 0x8ff80000" > \
+ $(obj)board/renesas/sh7785lcr/config.tmp ; \
+ $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
+ else \
+ cp $(obj)board/renesas/sh7785lcr/u-boot_29bit \
+ $(obj)board/renesas/sh7785lcr/u-boot.lds ; \
+ fi
+ @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
ap325rxa_config : unconfig
@mkdir -p $(obj)include
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
$(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \
- $(obj)board/{integratorap,integratorcp}/u-boot.lds \
- $(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds \
+ $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \
+ $(obj)board/bf5{18f,26,27,33,38f,48,61}-ez{brd,kit}/u-boot.lds \
+ $(obj)board/bf5{33,37}-stamp/u-boot.lds \
+ $(obj)cpu/arm926ejs/at91/u-boot.lds \
$(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}
@rm -f $(obj)api_examples/demo $(TIMESTAMP_FILE) $(VERSION_FILE)
@find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
- -o -name '*.o' -o -name '*.a' \) -print \
+ -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \
| xargs rm -f
clobber: clean
@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
$(obj)cscope.* $(obj)*.*~
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
- @rm -f $(obj)tools/{crc32.c,env_embedded.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes}
- @rm -f $(obj)tools/{image.c,fdt.c,fdt_ro.c,fdt_rw.c,fdt_strerror.c,zlib.h}
- @rm -f $(obj)tools/{fdt_wip.c,libfdt_internal.h}
+ @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
@rm -f $(obj)cpu/mpc824x/bedbug_603e.c
@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
projects / karo-tx-uboot.git / blobdiff