#
-# (C) Copyright 2000-2008
+# (C) Copyright 2000-2009
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# MA 02111-1307 USA
#
-VERSION = 2008
-PATCHLEVEL = 10
+VERSION = 2009
+PATCHLEVEL = 11
SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc2
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
ARCH = ppc
endif
+# The "tools" are needed early, so put this first
+# Don't include stuff already done in $(LIBS)
+SUBDIRS = tools \
+ examples/standalone \
+ examples/api
+
+.PHONY : $(SUBDIRS)
+
ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
+# Include autoconf.mk before config.mk so that the config options are available
+# to all top level build files. We need the dummy all: target to prevent the
+# dependency target in autoconf.mk.dep from being the default.
+all:
+sinclude $(obj)include/autoconf.mk.dep
+sinclude $(obj)include/autoconf.mk
+
# load ARCH, BOARD, and CPU configuration
include $(obj)include/config.mk
export ARCH CPU BOARD VENDOR SOC
-ifndef CROSS_COMPILE
+# set default to nothing for native builds
ifeq ($(HOSTARCH),$(ARCH))
-CROSS_COMPILE =
-else
-ifeq ($(ARCH),ppc)
-CROSS_COMPILE = ppc_8xx-
-endif
-ifeq ($(ARCH),arm)
-CROSS_COMPILE = arm-linux-
-endif
-ifeq ($(ARCH),i386)
-CROSS_COMPILE = i386-linux-
-endif
-ifeq ($(ARCH),mips)
-CROSS_COMPILE = mips_4KC-
-endif
-ifeq ($(ARCH),nios)
-CROSS_COMPILE = nios-elf-
+CROSS_COMPILE ?=
endif
-ifeq ($(ARCH),nios2)
-CROSS_COMPILE = nios2-elf-
-endif
-ifeq ($(ARCH),m68k)
-CROSS_COMPILE = m68k-elf-
-endif
-ifeq ($(ARCH),microblaze)
-CROSS_COMPILE = mb-
-endif
-ifeq ($(ARCH),blackfin)
-CROSS_COMPILE = bfin-uclinux-
-endif
-ifeq ($(ARCH),avr32)
-CROSS_COMPILE = avr32-linux-
-endif
-ifeq ($(ARCH),sh)
-CROSS_COMPILE = sh4-linux-
-endif
-ifeq ($(ARCH),sparc)
-CROSS_COMPILE = sparc-elf-
-endif # sparc
-endif # HOSTARCH,ARCH
-endif # CROSS_COMPILE
-
-export CROSS_COMPILE
# load other configuration
include $(TOPDIR)/config.mk
OBJS = cpu/$(CPU)/start.o
ifeq ($(CPU),i386)
OBJS += cpu/$(CPU)/start16.o
-OBJS += cpu/$(CPU)/reset.o
+OBJS += cpu/$(CPU)/resetvec.o
endif
ifeq ($(CPU),ppc4xx)
OBJS += cpu/$(CPU)/resetvec.o
LIBS = lib_generic/libgeneric.a
LIBS += lib_generic/lzma/liblzma.a
+LIBS += lib_generic/lzo/liblzo.a
LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
"board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
LIBS += cpu/$(CPU)/lib$(CPU).a
endif
LIBS += lib_$(ARCH)/lib$(ARCH).a
LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
- fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a
+ fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
+ fs/ubifs/libubifs.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += drivers/bios_emulator/libatibiosemu.a
LIBS += drivers/block/libblock.a
LIBS += drivers/dma/libdma.a
LIBS += drivers/fpga/libfpga.a
+LIBS += drivers/gpio/libgpio.a
LIBS += drivers/hwmon/libhwmon.a
LIBS += drivers/i2c/libi2c.a
LIBS += drivers/input/libinput.a
LIBS += drivers/mmc/libmmc.a
LIBS += drivers/mtd/libmtd.a
LIBS += drivers/mtd/nand/libnand.a
-LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
LIBS += drivers/mtd/onenand/libonenand.a
LIBS += drivers/mtd/ubi/libubi.a
LIBS += drivers/mtd/spi/libspi_flash.a
LIBS += drivers/net/sk98lin/libsk98lin.a
LIBS += drivers/pci/libpci.a
LIBS += drivers/pcmcia/libpcmcia.a
+LIBS += drivers/power/libpower.a
LIBS += drivers/spi/libspi.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/qe.a
LIBS += cpu/mpc8xxx/ddr/libddr.a
+LIBS += cpu/mpc8xxx/lib8xxx.a
TAG_SUBDIRS += cpu/mpc8xxx
endif
ifeq ($(CPU),mpc86xx)
LIBS += cpu/mpc8xxx/ddr/libddr.a
+LIBS += cpu/mpc8xxx/lib8xxx.a
TAG_SUBDIRS += cpu/mpc8xxx
endif
LIBS += drivers/rtc/librtc.a
LIBS += drivers/serial/libserial.a
-LIBS += drivers/usb/libusb.a
+LIBS += drivers/twserial/libtws.a
+LIBS += drivers/usb/gadget/libusb_gadget.a
+LIBS += drivers/usb/host/libusb_host.a
+LIBS += drivers/usb/musb/libusb_musb.a
LIBS += drivers/video/libvideo.a
+LIBS += drivers/watchdog/libwatchdog.a
LIBS += common/libcommon.a
LIBS += libfdt/libfdt.a
LIBS += api/libapi.a
LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
# Add GCC lib
-PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
-
-# The "tools" are needed early, so put this first
-# Don't include stuff already done in $(LIBS)
-SUBDIRS = tools \
- examples \
- api_examples
+ifdef USE_PRIVATE_LIBGCC
+ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
+PLATFORM_LIBGCC = -L $(OBJTREE)/lib_$(ARCH) -lgcc
+else
+PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
+endif
+else
+PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
+endif
+PLATFORM_LIBS += $(PLATFORM_LIBGCC)
+export PLATFORM_LIBS
-.PHONY : $(SUBDIRS)
+# Special flags for CPP when processing the linker script.
+# Pass the version down so we can handle backwards compatibility
+# on the fly.
+LDPPFLAGS += \
+ -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
+ $(shell $(LD) --version | \
+ sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
ifeq ($(CONFIG_NAND_U_BOOT),y)
NAND_SPL = nand_spl
ifeq ($(CONFIG_ONENAND_U_BOOT),y)
ONENAND_IPL = onenand_ipl
U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
+ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
endif
__OBJS := $(subst $(obj),,$(OBJS))
#########################################################################
#########################################################################
+# Always append ALL so that arch config.mk's can add custom ones
ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
-ifeq ($(ARCH),blackfin)
-ALL += $(obj)u-boot.ldr
-endif
all: $(ALL)
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(obj)u-boot.ldr: $(obj)u-boot
- $(LDR) -T $(CONFIG_BFIN_CPU) -f -c $@ $< $(LDR_FLAGS)
+ $(obj)tools/envcrc --binary > $(obj)env-ldr.o
+ $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
+$(obj)u-boot.kwb: $(obj)u-boot.bin
+ $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
+ -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
+
$(obj)u-boot.sha1: $(obj)u-boot.bin
$(obj)tools/ubsha1 $(obj)u-boot.bin
$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
-$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT)
+GEN_UBOOT = \
UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
+$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
+ $(GEN_UBOOT)
+ifeq ($(CONFIG_KALLSYMS),y)
+ smap=`$(call SYSTEM_MAP,u-boot) | \
+ awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
+ $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
+ -c common/system_map.c -o $(obj)common/system_map.o
+ $(GEN_UBOOT) $(obj)common/system_map.o
+endif
-$(OBJS): depend $(obj)include/autoconf.mk
+$(OBJS): depend
$(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
-$(LIBS): depend $(obj)include/autoconf.mk
+$(LIBS): depend $(SUBDIRS)
$(MAKE) -C $(dir $(subst $(obj),,$@))
-$(LIBBOARD): depend $(LIBS) $(obj)include/autoconf.mk
+$(LIBBOARD): depend $(LIBS)
$(MAKE) -C $(dir $(subst $(obj),,$@))
-$(SUBDIRS): depend $(obj)include/autoconf.mk
+$(SUBDIRS): depend
$(MAKE) -C $@ all
-$(LDSCRIPT): depend $(obj)include/autoconf.mk
+$(LDSCRIPT): depend
$(MAKE) -C $(dir $@) $(notdir $@)
+$(obj)u-boot.lds: $(LDSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+
$(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
$(MAKE) -C nand_spl/board/$(BOARDDIR) all
-$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
+$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
$(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
-$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
- cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
- cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin
+$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin
+ cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
$(VERSION_FILE):
@( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
env:
$(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
-depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE)
+depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
TAG_SUBDIRS += include
TAG_SUBDIRS += common
TAG_SUBDIRS += drivers/bios_emulator
TAG_SUBDIRS += drivers/block
+TAG_SUBDIRS += drivers/gpio
TAG_SUBDIRS += drivers/hwmon
TAG_SUBDIRS += drivers/i2c
TAG_SUBDIRS += drivers/input
TAG_SUBDIRS += drivers/mmc
TAG_SUBDIRS += drivers/mtd
TAG_SUBDIRS += drivers/mtd/nand
-TAG_SUBDIRS += drivers/mtd/nand_legacy
TAG_SUBDIRS += drivers/mtd/onenand
TAG_SUBDIRS += drivers/mtd/spi
TAG_SUBDIRS += drivers/net
> cscope.files
cscope -b -q -k
-$(obj)System.map: $(obj)u-boot
- @$(NM) $< | \
+SYSTEM_MAP = \
+ $(NM) $1 | \
grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
- sort > $(obj)System.map
+ LC_ALL=C sort
+$(obj)System.map: $(obj)u-boot
+ @$(call SYSTEM_MAP,$<) > $(obj)System.map
#
# Auto-generate the autoconf.mk file (which is included by all makefiles)
@$(XECHO) Generating $@ ; \
set -e ; \
: Generate the dependancies ; \
- $(CC) -x c -DDO_DEPS_ONLY -M $(HOST_CFLAGS) $(CPPFLAGS) \
+ $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
-MQ $(obj)include/autoconf.mk include/common.h > $@
$(obj)include/autoconf.mk: $(obj)include/config.h
set -e ; \
: Extract the config macros ; \
$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
- sed -n -f tools/scripts/define2mk.sed > $@
-
-sinclude $(obj)include/autoconf.mk.dep
+ sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
+ mv $@.tmp $@
#########################################################################
else # !config.mk
$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
+%: %_config
+ $(MAKE)
+
#========================================================================
# PowerPC
#========================================================================
cpci5200_config: unconfig
@$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
+digsy_mtc_config \
+digsy_mtc_LOWBOOT_config \
+digsy_mtc_RAMBOOT_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/digsy_mtc
+ @ >$(obj)include/config.h
+ @[ -z "$(findstring LOWBOOT_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
+ echo "... with LOWBOOT configuration" ; \
+ }
+ @[ -z "$(findstring RAMBOOT_,$@)" ] || \
+ { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
+ echo "... with RAMBOOT configuration" ; \
+ }
+ @$(MKCONFIG) -a digsy_mtc ppc mpc5xxx digsy_mtc
+
+galaxy5200_LOWBOOT_config \
+galaxy5200_config: unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
+ @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200
+
hmi1001_config: unconfig
@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
o2dnt_config: unconfig
@$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
+pcm030_config \
+pcm030_LOWBOOT_config: unconfig
+ @mkdir -p $(obj)include $(obj)board/phytec/pcm030
+ @ >$(obj)include/config.h
+ @[ -z "$(findstring LOWBOOT_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
+ echo "... with LOWBOOT configuration" ; \
+ }
+ @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
+
pf5200_config: unconfig
@$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd
## MPC512x Systems
#########################################################################
-ads5121_config \
-ads5121_rev2_config \
+aria_config: unconfig
+ @$(MKCONFIG) -a aria ppc mpc512x aria davedenx
+
+mecp5123_config: unconfig
+ @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd
+
+mpc5121ads_config \
+mpc5121ads_rev2_config \
: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring rev2,$@)" ] ; then \
echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
fi
- @$(MKCONFIG) -a ads5121 ppc mpc512x ads5121
-
+ @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale
#########################################################################
## MPC8xx Systems
}
@$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
+kmsupx4_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
+
KUP4K_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
mgsuvd_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd keymile
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
MHPC_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
@$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
stxxtc_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc stx
svm_sc8xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
CPCI2DP_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
-CPCI405_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
-
+CPCI405_config \
CPCI4052_config \
CPCI405DT_config \
CPCI405AB_config: unconfig
@mkdir -p $(obj)board/esd/cpci405
- @echo "TEXT_BASE = 0xFFFC0000" > $(obj)board/esd/cpci405/config.tmp
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
CPCIISER4_config: unconfig
DASA_SIM_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
+dlvision_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys
+
DP405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
G2000_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
+gdppc440etx_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys
+
hcu4_config: unconfig
@mkdir -p $(obj)board/netstal/common
@$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
HUB405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
+# Compact-Center(codename intip) & DevCon-Center use different U-Boot images
+intip_config \
+devconcenter_config: unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
+ tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys
+
JSE_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
PMC405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
+PMC405DE_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
+
PMC440_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+sequoia_ramboot_config \
+rainier_ramboot_config: unconfig
+ @mkdir -p $(obj)include $(obj)board/amcc/sequoia
+ @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
+ @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
+ tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
+ @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
+ @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
+ $(obj)board/amcc/sequoia/config.tmp
+
taihu_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
>> $(obj)board/xilinx/ppc440-generic/config.tmp
@$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
-XPEDITE1K_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k
+XPEDITE1000_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes
yosemite_config \
yellowstone_config: unconfig
## Coldfire
#########################################################################
+M5208EVBE_config : unconfig
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
+
M52277EVB_config \
M52277EVB_spansion_config \
M52277EVB_stmicro_config : unconfig
@$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
M54451EVB_config \
-M54451EVB_spansion_config \
M54451EVB_stmicro_config : unconfig
@case "$@" in \
- M54451EVB_config) FLASH=SPANSION;; \
- M54451EVB_spansion_config) FLASH=SPANSION;; \
+ M54451EVB_config) FLASH=NOR;; \
M54451EVB_stmicro_config) FLASH=STMICRO;; \
esac; \
- if [ "$${FLASH}" = "SPANSION" ] ; then \
- echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
+ if [ "$${FLASH}" = "NOR" ] ; then \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
- $(XECHO) "... with SPANSION boot..." ; \
+ $(XECHO) "... with NOR boot..." ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
## MPC83xx Systems
#########################################################################
+kmeter1_config: unconfig
+ @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
+
MPC8313ERDB_33_config \
MPC8313ERDB_66_config \
MPC8313ERDB_NAND_33_config \
MVBLM7_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision
-sbc8349_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
+sbc8349_config \
+sbc8349_PCI_33_config \
+sbc8349_PCI_66_config: unconfig
+ @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349
+
+SIMPC8313_LP_config \
+SIMPC8313_SP_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/sheldon/simpc8313
+ @if [ "$(findstring _LP_,$@)" ] ; then \
+ $(XECHO) -n "...Large Page NAND..." ; \
+ echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
+ fi ; \
+ if [ "$(findstring _SP_,$@)" ] ; then \
+ $(XECHO) -n "...Small Page NAND..." ; \
+ echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
+ fi ;
+ @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
TQM834x_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
+vme8349_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc83xx vme8349 esd
#########################################################################
## MPC85xx Systems
ATUM8548_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
+MPC8536DS_NAND_config \
+MPC8536DS_SDCARD_config \
+MPC8536DS_SPIFLASH_config \
+MPC8536DS_36BIT_config \
MPC8536DS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8536ds freescale
+ @$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale
MPC8540ADS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
MPC8568MDS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
+MPC8569MDS_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8569mds freescale
+
+MPC8572DS_36BIT_config \
MPC8572DS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8572ds freescale
+ @$(MKCONFIG) -t $(@:_config=) MPC8572DS ppc mpc85xx mpc8572ds freescale
+
+P2020DS_36BIT_config \
+P2020DS_config: unconfig
+ @$(MKCONFIG) -t $(@:_config=) P2020DS ppc mpc85xx p2020ds freescale
+
+P1011RDB_config \
+P1011RDB_NAND_config \
+P1011RDB_SDCARD_config \
+P1011RDB_SPIFLASH_config \
+P1020RDB_config \
+P1020RDB_NAND_config \
+P1020RDB_SDCARD_config \
+P1020RDB_SPIFLASH_config \
+P2010RDB_config \
+P2010RDB_NAND_config \
+P2010RDB_SDCARD_config \
+P2010RDB_SPIFLASH_config \
+P2020RDB_config \
+P2020RDB_NAND_config \
+P2020RDB_SDCARD_config \
+P2020RDB_SPIFLASH_config: unconfig
+ @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
PM854_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
sbc8540_config \
sbc8540_33_config \
sbc8540_66_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _66_,$@)" ] ; then \
- echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
- $(XECHO) "... 66 MHz PCI" ; \
- else \
- $(XECHO) "... 33 MHz PCI" ; \
- fi
- @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560
+ @$(MKCONFIG) -t $(@:_config=) SBC8540 ppc mpc85xx sbc8560
-sbc8548_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548
+sbc8548_config \
+sbc8548_PCI_33_config \
+sbc8548_PCI_66_config \
+sbc8548_PCI_33_PCIE_config \
+sbc8548_PCI_66_PCIE_config: unconfig
+ @$(MKCONFIG) -t $(@:_config=) sbc8548 ppc mpc85xx sbc8548
sbc8560_config \
sbc8560_33_config \
sbc8560_66_config: unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _66_,$@)" ] ; then \
- echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
- $(XECHO) "... 66 MHz PCI" ; \
- else \
- $(XECHO) "... 33 MHz PCI" ; \
- fi
- @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560
+ @$(MKCONFIG) -t $(@:_config=) sbc8560 ppc mpc85xx sbc8560
socrates_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
stxgp3_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stx
stxssa_config \
stxssa_4M_config: unconfig
echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
$(XECHO) "... with 4 MiB flash memory" ; \
fi
- @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa
+ @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa stx
TQM8540_config \
TQM8541_config \
TQM8548_config \
+TQM8548_AG_config \
+TQM8548_BE_config \
TQM8555_config \
TQM8560_config: unconfig
@mkdir -p $(obj)include
- @CTYPE=$(subst TQM,,$(@:_config=)); \
- $(XECHO) "... TQM"$${CTYPE}; \
+ @BTYPE=$(@:_config=); \
+ CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
+ $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
- echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
+ echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
- echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;
+ echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
+ @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
+
+XPEDITE5200_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
+
+XPEDITE5370_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
#########################################################################
## MPC86xx Systems
sbc8641d_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
+XPEDITE5170_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes
+
#########################################################################
## 74xx/7xx Systems
#########################################################################
at91rm9200dk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
+at91rm9200ek_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200
+
cmc_pu2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
+CPUAT91_RAM_config \
+CPUAT91_config : unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
+ @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
+
csb637_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
at91sam9260ek_nandflash_config \
at91sam9260ek_dataflash_cs0_config \
at91sam9260ek_dataflash_cs1_config \
-at91sam9260ek_config : unconfig
+at91sam9260ek_config \
+at91sam9g20ek_nandflash_config \
+at91sam9g20ek_dataflash_cs0_config \
+at91sam9g20ek_dataflash_cs1_config \
+at91sam9g20ek_config : unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring 9g20,$@)" ] ; then \
+ echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... 9G20 Variant" ; \
+ else \
+ echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \
+ fi;
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in NAND FLASH" ; \
fi;
@$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+at91sam9xeek_nandflash_config \
+at91sam9xeek_dataflash_cs0_config \
+at91sam9xeek_dataflash_cs1_config \
+at91sam9xeek_config : unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring _nandflash,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in NAND FLASH" ; \
+ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+ else \
+ echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+ fi;
+ @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
+
at91sam9261ek_nandflash_config \
at91sam9261ek_dataflash_cs0_config \
at91sam9261ek_dataflash_cs3_config \
-at91sam9261ek_config : unconfig
+at91sam9261ek_config \
+at91sam9g10ek_nandflash_config \
+at91sam9g10ek_dataflash_cs0_config \
+at91sam9g10ek_dataflash_cs3_config \
+at91sam9g10ek_config : unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring 9g10,$@)" ] ; then \
+ echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... 9G10 Variant" ; \
+ else \
+ echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \
+ fi;
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in NAND FLASH" ; \
- elif [ "$(findstring dataflash_cs3,$@)" ] ; then \
+ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
else \
fi;
@$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
+at91sam9263ek_norflash_config \
+at91sam9263ek_norflash_boot_config \
at91sam9263ek_nandflash_config \
at91sam9263ek_dataflash_config \
at91sam9263ek_dataflash_cs0_config \
at91sam9263ek_config : unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in NAND FLASH" ; \
+ elif [ "$(findstring norflash,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in NOR FLASH" ; \
else \
echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
fi;
+ @if [ "$(findstring norflash_boot,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... and boot from NOR FLASH" ; \
+ fi;
@$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
at91sam9rlek_nandflash_config \
at91sam9rlek_dataflash_config \
at91sam9rlek_dataflash_cs0_config \
at91sam9rlek_config : unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in NAND FLASH" ; \
fi;
@$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
+CPU9G20_128M_config \
+CPU9G20_config \
+CPU9260_128M_config \
+CPU9260_config : unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
+ @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91
+
+meesc_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
+
+pm9261_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
+
+at91sam9m10g45ek_nandflash_config \
+at91sam9m10g45ek_dataflash_config \
+at91sam9m10g45ek_dataflash_cs0_config \
+at91sam9m10g45ek_config \
+at91sam9g45ekes_nandflash_config \
+at91sam9g45ekes_dataflash_config \
+at91sam9g45ekes_dataflash_cs0_config \
+at91sam9g45ekes_config : unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring 9m10,$@)" ] ; then \
+ echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... 9M10G45 Variant" ; \
+ else \
+ echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
+ fi;
+
+ @if [ "$(findstring _nandflash,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in NAND FLASH" ; \
+ else \
+ echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+ fi;
+ @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
+
+pm9263_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
+
+SBC35_A9G20_NANDFLASH_config \
+SBC35_A9G20_EEPROM_config \
+SBC35_A9G20_config : unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
+ @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
+
+TNY_A9G20_NANDFLASH_config \
+TNY_A9G20_EEPROM_config \
+TNY_A9G20_config \
+TNY_A9260_NANDFLASH_config \
+TNY_A9260_EEPROM_config \
+TNY_A9260_config : unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
+ @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
+
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
integratorap_config \
ap920t_config \
ap926ejs_config \
ap946es_config: unconfig
- @board/integratorap/split_by_variant.sh $@
+ @board/armltd/integrator/split_by_variant.sh ap $@
integratorcp_config \
cp_config \
cp922_config \
cp922_XA10_config \
cp1026_config: unconfig
- @board/integratorcp/split_by_variant.sh $@
+ @board/armltd/integrator/split_by_variant.sh cp $@
davinci_dvevm_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
davinci_sonata_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
+davinci_dm355evm_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
+
+davinci_dm355leopard_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci
+
+davinci_dm365evm_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
+
+davinci_dm6467evm_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
+
+imx27lite_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
+
lpd7a400_config \
lpd7a404_config: unconfig
@$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
+mv88f6281gtw_ge_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
+
mx1ads_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
netstar_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t netstar
+nhk8815_config \
+nhk8815_onenand_config: unconfig
+ @mkdir -p $(obj)include
+ @ > $(obj)include/config.h
+ @if [ "$(findstring _onenand, $@)" ] ; then \
+ echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
+ $(XECHO) "... configured to boot from OneNand Flash"; \
+ else \
+ $(XECHO) "... configured to boot from Nand Flash"; \
+ fi
+ @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
+
omap1510inn_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
+ @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
$(XECHO) "... configured for CS3 boot"; \
fi;
- @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
+ @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
omap5912osk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
+
+openrd_base_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
$(XECHO) "... configured for CS3 boot"; \
fi;
- @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap
+ @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap
+
+rd6281a_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
sbc2410x_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
scb9328_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
+sheevaplug_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
+
smdk2400_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
smdk2410_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
-SX1_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm925t sx1
+SX1_stdout_serial_config \
+SX1_config: unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
+ echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
+ $(XECHO) "... configured for stdout serial"; \
+ else \
+ echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
+ $(XECHO) "... configured for stdout usbtty"; \
+ fi;
+ @$(MKCONFIG) SX1 arm arm925t sx1
# TRAB default configuration: 8 MB Flash, 32 MB RAM
xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
versatile_config \
versatileab_config \
versatilepb_config : unconfig
- @board/versatile/split_by_variant.sh $@
+ @board/armltd/versatile/split_by_variant.sh $@
voiceblue_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
@$(MKCONFIG) $(@:_config=) arm arm720t modnet50
evb4510_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t evb4510
+ @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b
lpc2292sodimm_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
SMN42_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
+#########################################################################
+## ARM CORTEX Systems
+#########################################################################
+
+devkit8000_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
+
+omap3_beagle_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3
+
+omap3_overo_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3
+
+omap3_evm_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3
+
+omap3_pandora_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
+
+omap3_sdp3430_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3
+
+omap3_zoom1_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3
+
+omap3_zoom2_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
+
+smdkc100_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
+
#########################################################################
## XScale Systems
#########################################################################
pxa255_idp_config: unconfig
@$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
+polaris_config \
trizepsiv_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa trizepsiv
+ @mkdir -p $(obj)include
+ @if [ "$(findstring polaris,$@)" ] ; then \
+ echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \
+ fi;
+ @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv
wepep250_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa wepep250
apollon_config : unconfig
@mkdir -p $(obj)include
- @mkdir -p $(obj)onenand_ipl/board/apollon
@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
imx31_litekit_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31
+ @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
+imx31_phycore_eet_config \
imx31_phycore_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31
+ @mkdir -p $(obj)include
+ @if [ -n "$(findstring _eet_,$@)" ]; then \
+ echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \
+ fi
+ @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
mx31ads_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
+mx31pdk_config \
+mx31pdk_nand_config : unconfig
+ @mkdir -p $(obj)include
+ @if [ -n "$(findstring _nand_,$@)" ]; then \
+ echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \
+ else \
+ echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \
+ echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \
+ fi
+ @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
+
omap2420h4_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
+ @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
+
+qong_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
#########################################################################
## ARM1176 Systems
#########################################################################
## AMD SC520 CDP
#########################################################################
+eNET_config : unconfig
+ @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520
+
sc520_cdp_config : unconfig
- @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp
+ @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520
sc520_spunk_config : unconfig
- @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
+ @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
sc520_spunk_rel_config : unconfig
- @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
+ @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
#========================================================================
# MIPS
tb0229_config: unconfig
@$(MKCONFIG) $(@:_config=) mips mips tb0229
+vct_premium_config \
+vct_premium_small_config \
+vct_premium_onenand_config \
+vct_premium_onenand_small_config \
+vct_platinum_config \
+vct_platinum_small_config \
+vct_platinum_onenand_config \
+vct_platinum_onenand_small_config \
+vct_platinumavc_config \
+vct_platinumavc_small_config \
+vct_platinumavc_onenand_config \
+vct_platinumavc_onenand_small_config: unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring _premium,$@)" ] ; then \
+ echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \
+ $(XECHO) "... on Premium board variant" ; \
+ fi
+ @if [ "$(findstring _platinum_,$@)" ] ; then \
+ echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \
+ $(XECHO) "... on Platinum board variant" ; \
+ fi
+ @if [ "$(findstring _platinumavc,$@)" ] ; then \
+ echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \
+ $(XECHO) "... on PlatinumAVC board variant" ; \
+ fi
+ @if [ "$(findstring _onenand,$@)" ] ; then \
+ echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \
+ $(XECHO) "... on OneNAND board variant" ; \
+ fi
+ @if [ "$(findstring _small,$@)" ] ; then \
+ echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \
+ $(XECHO) "... stripped down image variant" ; \
+ fi
+ @$(MKCONFIG) -a vct mips mips vct micronas
+
#########################################################################
## MIPS32 AU1X00
#########################################################################
## Microblaze
#========================================================================
-ml401_config: unconfig
+microblaze-generic_config: unconfig
@mkdir -p $(obj)include
- @echo "#define CONFIG_ML401 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
-
-suzaku_config: unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
- @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
+ @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
#========================================================================
# Blackfin
#========================================================================
# Analog Devices boards
-BFIN_BOARDS = bf533-ezkit bf533-stamp bf537-stamp bf561-ezkit
+BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
+ bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit
+
+# Bluetechnix tinyboards
+BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 tcm-bf537
+
+# Misc third party boards
+BFIN_BOARDS += bf537-minotaur bf537-srv1 blackstamp
+
+# I-SYST Micromodule
+BFIN_BOARDS += ibf-dsp561
$(BFIN_BOARDS:%=%_config) : unconfig
@$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
-$(BFIN_BOARDS):
- $(MAKE) $@_config
- $(MAKE)
-
#========================================================================
# AVR32
#========================================================================
## sh2 (Renesas SuperH)
#########################################################################
rsk7203_config: unconfig
- @ >include/config.h
- @echo "#define CONFIG_RSK7203 1" >> include/config.h
- @./mkconfig -a $(@:_config=) sh sh2 rsk7203 renesas
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
+ @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
#########################################################################
## sh3 (Renesas SuperH)
MigoR_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
- @./mkconfig -a $(@:_config=) sh sh4 MigoR renesas
+ @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
ms7750se_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
+xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
+sh7785lcr_32bit_config \
sh7785lcr_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_SH7785LCR 1" >> include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr renesas
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/renesas/sh7785lcr
+ @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
+ @if [ "$(findstring 32bit, $@)" ] ; then \
+ echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
+ echo "TEXT_BASE = 0x8ff80000" > \
+ $(obj)board/renesas/sh7785lcr/config.tmp ; \
+ $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
+ fi
+ @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
ap325rxa_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
+espt_config : unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
+ @$(MKCONFIG) -a $(@:_config=) sh sh4 espt
+
#========================================================================
# SPARC
#========================================================================
#########################################################################
clean:
- @rm -f $(obj)examples/82559_eeprom $(obj)examples/eepro100_eeprom \
- $(obj)examples/hello_world $(obj)examples/interrupt \
- $(obj)examples/mem_to_mem_idma2intr \
- $(obj)examples/sched $(obj)examples/smc91111_eeprom \
- $(obj)examples/test_burst $(obj)examples/timer
+ @rm -f $(obj)examples/standalone/82559_eeprom \
+ $(obj)examples/standalone/atmel_df_pow2 \
+ $(obj)examples/standalone/eepro100_eeprom \
+ $(obj)examples/standalone/hello_world \
+ $(obj)examples/standalone/interrupt \
+ $(obj)examples/standalone/mem_to_mem_idma2intr \
+ $(obj)examples/standalone/sched \
+ $(obj)examples/standalone/smc91111_eeprom \
+ $(obj)examples/standalone/test_burst \
+ $(obj)examples/standalone/timer
+ @rm -f $(obj)examples/api/demo{,.bin}
@rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \
$(obj)tools/env/{fw_printenv,fw_setenv} \
$(obj)tools/envcrc \
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
$(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \
- $(obj)board/{integratorap,integratorcp}/u-boot.lds \
- $(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds \
+ $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \
+ $(obj)lib_blackfin/u-boot.lds \
+ $(obj)u-boot.lds \
$(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
@rm -f $(obj)include/bmp_logo.h
- @rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}
- @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
- @rm -f $(obj)api_examples/demo $(TIMESTAMP_FILE) $(VERSION_FILE)
+ @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
+ @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
+ @rm -f $(ONENAND_BIN)
+ @rm -f $(obj)onenand_ipl/u-boot.lds
+ @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
@find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
- -o -name '*.o' -o -name '*.a' \) -print \
+ -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \
| xargs rm -f
clobber: clean
@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
$(obj)cscope.* $(obj)*.*~
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
- @rm -f $(obj)tools/{crc32.c,env_embedded.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes}
- @rm -f $(obj)tools/{image.c,fdt.c,fdt_ro.c,fdt_rw.c,fdt_strerror.c,zlib.h}
- @rm -f $(obj)tools/{fdt_wip.c,libfdt_internal.h}
+ @rm -f $(obj)u-boot.kwb
+ @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
@rm -f $(obj)cpu/mpc824x/bedbug_603e.c
@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
- @[ ! -d $(obj)api_examples ] || find $(obj)api_examples -name "*" -type l -print | xargs rm -f
ifeq ($(OBJTREE),$(SRCTREE))
mrproper \
projects / karo-tx-uboot.git / blobdiff