- 74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs
- arm720t Files specific to ARM 720 CPUs
- arm920t Files specific to ARM 920 CPUs
+ - at91rm9200 Files specific to Atmel AT91RM9200 CPU
- imx Files specific to Freescale MC9328 i.MX CPUs
- s3c24x0 Files specific to Samsung S3C24X0 CPUs
- arm925t Files specific to ARM 925 CPUs
- arm926ejs Files specific to ARM 926 CPUs
- arm1136 Files specific to ARM 1136 CPUs
- - at91rm9200 Files specific to Atmel AT91RM9200 CPUs
- i386 Files specific to i386 CPUs
- ixp Files specific to Intel XScale IXP CPUs
- mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs
- mpc85xx Files specific to Freescale MPC85xx CPUs
- nios Files specific to Altera NIOS CPUs
- nios2 Files specific to Altera Nios-II CPUs
- - ppc4xx Files specific to IBM PowerPC 4xx CPUs
+ - ppc4xx Files specific to AMCC PowerPC 4xx CPUs
- pxa Files specific to Intel XScale PXA CPUs
- s3c44b0 Files specific to Samsung S3C44B0 CPUs
- sa1100 Files specific to Intel StrongARM SA1100 CPUs
CONFIG_ADCIOP CONFIG_GEN860T CONFIG_PCI405
CONFIG_ADS860 CONFIG_GENIETV CONFIG_PCIPPC2
CONFIG_AMX860 CONFIG_GTH CONFIG_PCIPPC6
- CONFIG_AR405 CONFIG_gw8260 CONFIG_pcu_e
- CONFIG_BAB7xx CONFIG_hermes CONFIG_PIP405
- CONFIG_c2mon CONFIG_hymod CONFIG_PM826
- CONFIG_CANBT CONFIG_IAD210 CONFIG_ppmc8260
- CONFIG_CCM CONFIG_ICU862 CONFIG_QS823
- CONFIG_CMI CONFIG_IP860 CONFIG_QS850
- CONFIG_cogent_mpc8260 CONFIG_IPHASE4539 CONFIG_QS860T
- CONFIG_cogent_mpc8xx CONFIG_IVML24 CONFIG_RBC823
- CONFIG_CPCI405 CONFIG_IVML24_128 CONFIG_RPXClassic
- CONFIG_CPCI4052 CONFIG_IVML24_256 CONFIG_RPXlite
- CONFIG_CPCIISER4 CONFIG_IVMS8 CONFIG_RPXsuper
- CONFIG_CPU86 CONFIG_IVMS8_128 CONFIG_rsdproto
- CONFIG_CRAYL1 CONFIG_IVMS8_256 CONFIG_sacsng
- CONFIG_CSB272 CONFIG_JSE CONFIG_Sandpoint8240
- CONFIG_CU824 CONFIG_LANTEC CONFIG_Sandpoint8245
- CONFIG_DASA_SIM CONFIG_lwmon CONFIG_sbc8260
- CONFIG_DB64360 CONFIG_MBX CONFIG_sbc8560
- CONFIG_DB64460 CONFIG_MBX860T CONFIG_SM850
- CONFIG_DU405 CONFIG_MHPC CONFIG_SPD823TS
- CONFIG_DUET_ADS CONFIG_MIP405 CONFIG_STXGP3
- CONFIG_EBONY CONFIG_MOUSSE CONFIG_SXNI855T
- CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM823L
- CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM8260
- CONFIG_ep8260 CONFIG_MPC8560ADS CONFIG_TQM850L
- CONFIG_ERIC CONFIG_MUSENKI CONFIG_TQM855L
- CONFIG_ESTEEM192E CONFIG_MVS1 CONFIG_TQM860L
- CONFIG_ETX094 CONFIG_NETPHONE CONFIG_TTTech
- CONFIG_EVB64260 CONFIG_NETTA CONFIG_UTX8245
- CONFIG_FADS823 CONFIG_NETVIA CONFIG_V37
- CONFIG_FADS850SAR CONFIG_NX823 CONFIG_W7OLMC
- CONFIG_FADS860T CONFIG_OCRTC CONFIG_W7OLMG
- CONFIG_FLAGADM CONFIG_ORSG CONFIG_WALNUT405
- CONFIG_FPS850L CONFIG_OXC CONFIG_ZPC1900
- CONFIG_FPS860L CONFIG_ZUMA
+ CONFIG_AP1000 CONFIG_gw8260 CONFIG_pcu_e
+ CONFIG_AR405 CONFIG_hermes CONFIG_PIP405
+ CONFIG_BAB7xx CONFIG_hymod CONFIG_PM826
+ CONFIG_c2mon CONFIG_IAD210 CONFIG_ppmc8260
+ CONFIG_CANBT CONFIG_ICU862 CONFIG_QS823
+ CONFIG_CCM CONFIG_IP860 CONFIG_QS850
+ CONFIG_CMI CONFIG_IPHASE4539 CONFIG_QS860T
+ CONFIG_cogent_mpc8260 CONFIG_IVML24 CONFIG_RBC823
+ CONFIG_cogent_mpc8xx CONFIG_IVML24_128 CONFIG_RPXClassic
+ CONFIG_CPCI405 CONFIG_IVML24_256 CONFIG_RPXlite
+ CONFIG_CPCI4052 CONFIG_IVMS8 CONFIG_RPXsuper
+ CONFIG_CPCIISER4 CONFIG_IVMS8_128 CONFIG_rsdproto
+ CONFIG_CPU86 CONFIG_IVMS8_256 CONFIG_sacsng
+ CONFIG_CRAYL1 CONFIG_JSE CONFIG_Sandpoint8240
+ CONFIG_CSB272 CONFIG_LANTEC CONFIG_Sandpoint8245
+ CONFIG_CU824 CONFIG_LITE5200B CONFIG_sbc8260
+ CONFIG_DASA_SIM CONFIG_lwmon CONFIG_sbc8560
+ CONFIG_DB64360 CONFIG_MBX CONFIG_SM850
+ CONFIG_DB64460 CONFIG_MBX860T CONFIG_SPD823TS
+ CONFIG_DU405 CONFIG_MHPC CONFIG_STXGP3
+ CONFIG_DUET_ADS CONFIG_MIP405 CONFIG_SXNI855T
+ CONFIG_EBONY CONFIG_MOUSSE CONFIG_TQM823L
+ CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM8260
+ CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM850L
+ CONFIG_ep8260 CONFIG_MPC8540EVAL CONFIG_TQM855L
+ CONFIG_ERIC CONFIG_MPC8560ADS CONFIG_TQM860L
+ CONFIG_ESTEEM192E CONFIG_MUSENKI CONFIG_TTTech
+ CONFIG_ETX094 CONFIG_MVS1 CONFIG_UTX8245
+ CONFIG_EVB64260 CONFIG_NETPHONE CONFIG_V37
+ CONFIG_FADS823 CONFIG_NETTA CONFIG_W7OLMC
+ CONFIG_FADS850SAR CONFIG_NETVIA CONFIG_W7OLMG
+ CONFIG_FADS860T CONFIG_NX823 CONFIG_WALNUT
+ CONFIG_FLAGADM CONFIG_OCRTC CONFIG_ZPC1900
+ CONFIG_FPS850L CONFIG_ORSG CONFIG_ZUMA
+ CONFIG_FPS860L CONFIG_OXC
ARM based boards:
-----------------
- CONFIG_AT91RM9200DK, CONFIG_CERF250, CONFIG_DNP1110,
- CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE,
- CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
- CONFIG_LART, CONFIG_LPD7A400 CONFIG_LUBBOCK,
+ CONFIG_ARMADILLO, CONFIG_AT91RM9200DK, CONFIG_CERF250,
+ CONFIG_CSB637, CONFIG_DNP1110, CONFIG_EP7312,
+ CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, CONFIG_IMPA7,
+ CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, CONFIG_KB9202,
+ CONFIG_LART, CONFIG_LPD7A400, CONFIG_LUBBOCK,
CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, CONFIG_SHANNON,
CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410,
CONFIG_TRAB, CONFIG_VCMA9
expect it to be in bytes, others in MB.
Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes.
+ CONFIG_OF_FLAT_TREE
+
+ New kernel versions are expecting firmware settings to be
+ passed using flat open firmware trees.
+ The environment variable "disable_of", when set, disables this
+ functionality.
+
+ CONFIG_OF_FLAT_TREE_MAX_SIZE
+
+ The maximum size of the constructed OF tree.
+
+ OF_CPU - The proper name of the cpus node.
+ OF_SOC - The proper name of the soc node.
+ OF_TBCLK - The timebase frequency.
+ OF_STDOUT_PATH - The path to the console device
+
+ CONFIG_OF_HAS_BD_T
+
+ The resulting flat device tree will have a copy of the bd_t.
+ Space should be pre-allocated in the dts for the bd_t.
+
+ CONFIG_OF_HAS_UBOOT_ENV
+
+ The resulting flat device tree will have a copy of u-boot's
+ environment variables
+
+ CONFIG_OF_BOARD_SETUP
+
+ Board code has addition modification that it wants to make
+ to the flat device tree before handing it off to the kernel
+
- Serial Ports:
CFG_PL010_SERIAL
- Console UART Number:
CONFIG_UART1_CONSOLE
- IBM PPC4xx only.
+ AMCC PPC4xx only.
If defined internal UART1 (and not UART0) is used
as default U-Boot console.
CFG_CMD_DIAG * Diagnostics
CFG_CMD_DOC * Disk-On-Chip Support
CFG_CMD_DTT * Digital Therm and Thermostat
- CFG_CMD_ECHO * echo arguments
+ CFG_CMD_ECHO echo arguments
CFG_CMD_EEPROM * EEPROM read/write support
CFG_CMD_ELF * bootelf, bootvx
CFG_CMD_ENV saveenv
CFG_CMD_SAVES * save S record dump
CFG_CMD_SCSI * SCSI Support
CFG_CMD_SDRAM * print SDRAM configuration information
+ (requires CFG_CMD_I2C)
CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
CFG_CMD_SPI * SPI serial bus support
CFG_CMD_USB * USB support
allows for a "silent" boot where a splash screen is
loaded very quickly after power-on.
+- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
+
+ If this option is set, additionally to standard BMP
+ images, gzipped BMP images can be displayed via the
+ splashscreen support or the bmp command.
+
- Compression support:
CONFIG_BZIP2
remaining RAM in a form that can be passed as boot
argument to Linux, for instance like that:
- setenv bootargs ... mem=\$(mem)
+ setenv bootargs ... mem=\${mem}
saveenv
This way you can tell Linux not to use this memory,
When SystemACE support is added, the "ace" device type
becomes available to the fat commands, i.e. fatls.
+- TFTP Fixed UDP Port:
+ CONFIG_TFTP_PORT
+
+ If this is defined, the environment variable tftpsrcp
+ is used to supply the TFTP UDP source port value.
+ If tftpsrcp isn't defined, the normal pseudo-random port
+ number generator is used.
+
+ Also, the environment variable tftpdstp is used to supply
+ the TFTP UDP destination port value. If tftpdstp isn't
+ defined, the normal port 69 is used.
+
+ The purpose for tftpsrcp is to allow a TFTP server to
+ blindly start the TFTP transfer using the pre-configured
+ target IP address and UDP port. This has the effect of
+ "punching through" the (Windows XP) firewall, allowing
+ the remainder of the TFTP transfer to proceed normally.
+ A better solution is to properly configure the firewall,
+ but sometimes that is not allowed.
+
- Show boot progress:
CONFIG_SHOW_BOOT_PROGRESS
- CFG_MALLOC_LEN:
Size of DRAM reserved for malloc() use.
+- CFG_BOOTM_LEN:
+ Normally compressed uImages are limited to an
+ uncompressed size of 8 MBytes. If this is not enough,
+ you can define CFG_BOOTM_LEN in your board config file
+ to adjust this setting to your needs.
+
- CFG_BOOTMAPSZ:
Maximum size of memory mapped by the startup code of
the Linux kernel; all data that must be processed by
This option also enables the building of the cfi_flash driver
in the drivers directory
+- CFG_FLASH_QUIET_TEST
+ If this option is defined, the common CFI flash doesn't
+ print it's warning upon not recognized FLASH banks. This
+ is useful, if some of the configured banks are only
+ optionally available.
+
- CFG_RX_ETH_BUFFER:
Defines the number of ethernet receive buffers. On some
ethernet controllers it is recommended to set this value
This only takes effect if the memory commands are activated
globally (CFG_CMD_MEM).
-- CONFIG_INIT_CRITICAL
- [ARM only] If this variable is NOT defined, then
- certain critical initializations (like setting up the
- memory controller) are omitted. Normally this
- variable MUST be defined for all boards. The only
- exception is when U-Boot is loaded (to RAM) by some
- other boot loader or by a debugger which performs
- these intializations itself.
+- CONFIG_SKIP_LOWLEVEL_INIT
+- CONFIG_SKIP_RELOCATE_UBOOT
+
+ [ARM only] If these variables are defined, then
+ certain low level initializations (like setting up
+ the memory controller) are omitted and/or U-Boot does
+ not relocate itself into RAM.
+ Normally these variables MUST NOT be defined. The
+ only exception is when U-Boot is loaded (to RAM) by
+ some other boot loader or by a debugger which
+ performs these intializations itself.
+
Building the Software:
======================
DUET_ADS_config MBX_config sbc8560_66_config
EBONY_config MPC8260ADS_config SM850_config
ELPT860_config MPC8540ADS_config SPD823TS_config
- ESTEEM192E_config MPC8560ADS_config stxgp3_config
- ETX094_config NETVIA_config SXNI855T_config
- FADS823_config omap1510inn_config TQM823L_config
- FADS850SAR_config omap1610h2_config TQM850L_config
- FADS860T_config omap1610inn_config TQM855L_config
- FPS850L_config omap5912osk_config TQM860L_config
- omap2420h4_config WALNUT405_config
- Yukon8220_config
+ ESTEEM192E_config MPC8540EVAL_config stxgp3_config
+ ETX094_config MPC8560ADS_config SXNI855T_config
+ FADS823_config NETVIA_config TQM823L_config
+ FADS850SAR_config omap1510inn_config TQM850L_config
+ FADS860T_config omap1610h2_config TQM855L_config
+ FPS850L_config omap1610inn_config TQM860L_config
+ omap5912osk_config walnut_config
+ omap2420h4_config Yukon8220_config
ZPC1900_config
Note: for some board special configuration names may exist; check if
Useful on scripts which control the retry operation
themselves.
+ tftpsrcport - If this is set, the value is used for TFTP's
+ UDP source port.
+
+ tftpdstport - If this is set, the value is used for TFTP's UDP
+ destination port instead of the Well Know Port 69.
+
vlan - When set to a value < 4095 the traffic over
ethernet is encapsulated/received over 802.1q
VLAN tagged frames.
- supports environment variables (through setenv / saveenv commands)
- several commands on one line, separated by ';'
-- variable substitution using "... $(name) ..." syntax
+- variable substitution using "... ${name} ..." syntax
- special characters ('$', ';') can be escaped by prefixing with '\',
for example:
- setenv bootcmd bootm \$(address)
+ setenv bootcmd bootm \${address}
- You can also escape text by enclosing in single apostrophes, for example:
setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off'
stage-2 loader which in turn loads and then invokes the kernel
proper. Loader sources will eventually appear in the NetBSD source
tree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the
-meantime, send mail to bruno@exet-ag.de and/or wd@denx.de for
-details.
+meantime, see ftp://ftp.denx.de/pub/u-boot/ppcboot_stage2.tar.gz
Implementation Internals:
CFG_INIT_RAM_ADDR should be somewhere that won't interfere
with your processor/board/system design. The default value
you will find in any recent u-boot distribution in
- Walnut405.h should work for you. I'd set it to a value larger
+ walnut.h should work for you. I'd set it to a value larger
than your SDRAM module. If you have a 64MB SDRAM module, set
it above 400_0000. Just make sure your board has no resources
that are supposed to respond to that address! That code in
establish some rules. Submissions which do not conform to these rules
may be rejected, even when they contain important and valuable stuff.
+Patches shall be sent to the u-boot-users mailing list.
When you send a patch, please include the following information with
it:
(using #ifdef), and the resulting code with the new feature
disabled must not need more memory than the old code without your
modification.
+
+* Remember that there is a size limit of 40 kB per message on the
+ u-boot-users mailing list. Compression may help.
projects / karo-tx-uboot.git / blobdiff