Patch from Stefan Roese.

[karo-tx-uboot.git] / README

diff --git a/README b/README
index 35de0e27760168811f4f848afa65bc5b109f5a04..4dfb292bf5a1bcd31e3e167ce4faa5d4c1c3b7cf 100644 (file)
--- a/README
+++ b/README
@@ -343,7 +343,8 @@ The following options need to be configured:
                CONFIG_GTH,        CONFIG_RPXClassic, CONFIG_rsdproto,
                CONFIG_IAD210,     CONFIG_RPXlite,    CONFIG_sbc8260,
                CONFIG_EBONY,      CONFIG_sacsng,     CONFIG_FPS860L,
-               CONFIG_V37,        CONFIG_ELPT860,    CONFIG_CMI
+               CONFIG_V37,        CONFIG_ELPT860,    CONFIG_CMI,
+               CONFIG_NETVIA
 
                ARM based boards:
                -----------------
@@ -469,6 +470,13 @@ The following options need to be configured:
                Set to 0 to disable this feature (this is the default).
                This will also disable hardware handshake.
 
+- Console UART Number:
+               CONFIG_UART1_CONSOLE
+
+               IBM PPC4xx only.
+               If defined internal UART1 (and not UART0) is used
+               as default U-Boot console.
+
 - Boot Delay:  CONFIG_BOOTDELAY - in seconds
                Delay before automatically booting the default image;
                set to -1 to disable autoboot.
@@ -638,6 +646,7 @@ The following options need to be configured:
                CONFIG_RTC_MC146818     - use MC146818 RTC
                CONFIG_RTC_DS1307       - use Maxim, Inc. DS1307 RTC
                CONFIG_RTC_DS1337       - use Maxim, Inc. DS1337 RTC
+               CONFIG_RTC_DS1338       - use Maxim, Inc. DS1338 RTC
                CONFIG_RTC_DS164x       - use Dallas DS164x RTC
 
 - Timestamp Support:
@@ -1708,6 +1717,16 @@ Low Level (hardware related) configuration options:
                #define'd default value in commproc.h resp.
                cpm_8260.h.
 
+- CFG_PCI_SLV_MEM_LOCAL, CFG_PCI_SLV_MEM_BUS, CFG_PICMR0_MASK_ATTRIB,
+  CFG_PCI_MSTR0_LOCAL, CFG_PCIMSK0_MASK, CFG_PCI_MSTR1_LOCAL,
+  CFG_PCIMSK1_MASK, CFG_PCI_MSTR_MEM_LOCAL, CFG_PCI_MSTR_MEM_BUS,
+  CFG_CPU_PCI_MEM_START, CFG_PCI_MSTR_MEM_SIZE, CFG_POCMR0_MASK_ATTRIB,
+  CFG_PCI_MSTR_MEMIO_LOCAL, CFG_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START,
+  CFG_PCI_MSTR_MEMIO_SIZE, CFG_POCMR1_MASK_ATTRIB, CFG_PCI_MSTR_IO_LOCAL,
+  CFG_PCI_MSTR_IO_BUS, CFG_CPU_PCI_IO_START, CFG_PCI_MSTR_IO_SIZE,
+  CFG_POCMR2_MASK_ATTRIB: (MPC826x only)
+               Overrides the default PCI memory map in cpu/mpc8260/pci.c if set.
+
 Building the Software:
 ======================
 
@@ -1750,7 +1769,7 @@ configurations; the following names are supported:
     FPS850L_config       Sandpoint8240_config  sbc8260_config
     GENIETV_config       TQM823L_config        PIP405_config
     GEN860T_config       EBONY_config          FPS860L_config
-    ELPT860_config       cmi_mpc5xx_config
+    ELPT860_config       cmi_mpc5xx_config     NETVIA_config
 
 Note: for some board special configuration names may exist; check  if
       additional  information is available from the board vendor; for
@@ -2066,8 +2085,8 @@ defines the following image properties:
 
 * Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD,
   4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks,
-  LynxOS, pSOS, QNX;
-  Currently supported: Linux, NetBSD, VxWorks, QNX).
+  LynxOS, pSOS, QNX, RTEMS, ARTOS;
+  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS).
 * Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
   IA64, MIPS, MIPS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
   Currently supported: PowerPC).