tpm: Enable 'tpmtest' command for Chrome OS boards with TPMs

[karo-tx-uboot.git] / README

diff --git a/README b/README
index c56001cdecbbe88925d779806de37f174c0b135d..5980f6da85c6f5699ba27003b72a1c0dbeb7b343 100644 (file)
--- a/README
+++ b/README
@@ -702,6 +702,7 @@ The following options need to be configured:
                do have ability to provide rudimentary version and machine
                specific checks, but expect no product checks.
                CONFIG_ARM_ERRATA_798870
                do have ability to provide rudimentary version and machine
                specific checks, but expect no product checks.
                CONFIG_ARM_ERRATA_798870

+               CONFIG_ARM_ERRATA_801819

 
 - Tegra SoC options:
                CONFIG_TEGRA_SUPPORT_NON_SECURE
 
 - Tegra SoC options:
                CONFIG_TEGRA_SUPPORT_NON_SECURE


@@ -1087,8 +1088,6 @@ The following options need to be configured:
                CONFIG_AUTOBOOT_PROMPT
                CONFIG_AUTOBOOT_DELAY_STR
                CONFIG_AUTOBOOT_STOP_STR
                CONFIG_AUTOBOOT_PROMPT
                CONFIG_AUTOBOOT_DELAY_STR
                CONFIG_AUTOBOOT_STOP_STR

-               CONFIG_AUTOBOOT_DELAY_STR2
-               CONFIG_AUTOBOOT_STOP_STR2

                CONFIG_ZERO_BOOTDELAY_CHECK
                CONFIG_RESET_TO_RETRY
 
                CONFIG_ZERO_BOOTDELAY_CHECK
                CONFIG_RESET_TO_RETRY
 


@@ -1160,9 +1159,7 @@ The following options need to be configured:
                Monitor commands can be included or excluded
                from the build by using the #include files
                <config_cmd_all.h> and #undef'ing unwanted
                Monitor commands can be included or excluded
                from the build by using the #include files
                <config_cmd_all.h> and #undef'ing unwanted

-               commands, or using <config_cmd_default.h>
-               and augmenting with additional #define's
-               for wanted commands.
+               commands, or adding #define's for wanted commands.

 
                The default command configuration includes all commands
                except those marked below with a "*".
 
                The default command configuration includes all commands
                except those marked below with a "*".


@@ -1495,9 +1492,6 @@ The following options need to be configured:
                Management command for E1000 devices.  When used on devices
                with SPI support you can reprogram the EEPROM from U-Boot.
 
                Management command for E1000 devices.  When used on devices
                with SPI support you can reprogram the EEPROM from U-Boot.
 

-               CONFIG_E1000_FALLBACK_MAC
-               default MAC for empty EEPROM after production.
-

                CONFIG_EEPRO100
                Support for Intel 82557/82559/82559ER chips.
                Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM
                CONFIG_EEPRO100
                Support for Intel 82557/82559/82559ER chips.
                Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM


@@ -1610,12 +1604,6 @@ The following options need to be configured:
                Support for i2c bus TPM devices. Only one device
                per system is supported at this time.
 
                Support for i2c bus TPM devices. Only one device
                per system is supported at this time.
 

-                       CONFIG_TPM_TIS_I2C_BUS_NUMBER
-                       Define the the i2c bus number for the TPM device
-
-                       CONFIG_TPM_TIS_I2C_SLAVE_ADDRESS
-                       Define the TPM's address on the i2c bus
-

                        CONFIG_TPM_TIS_I2C_BURST_LIMITATION
                        Define the burst count bytes upper limit
 
                        CONFIG_TPM_TIS_I2C_BURST_LIMITATION
                        Define the burst count bytes upper limit
 


@@ -1785,7 +1773,7 @@ The following options need to be configured:
                key for the Replay Protection Memory Block partition in eMMC.
 
 - USB Device Firmware Update (DFU) class support:
                key for the Replay Protection Memory Block partition in eMMC.
 
 - USB Device Firmware Update (DFU) class support:

-               CONFIG_DFU_FUNCTION
+               CONFIG_USB_FUNCTION_DFU

                This enables the USB portion of the DFU USB class
 
                CONFIG_CMD_DFU
                This enables the USB portion of the DFU USB class
 
                CONFIG_CMD_DFU


@@ -1830,6 +1818,9 @@ The following options need to be configured:
                sending again an USB request to the device.
 
 - USB Device Android Fastboot support:
                sending again an USB request to the device.
 
 - USB Device Android Fastboot support:

+               CONFIG_USB_FUNCTION_FASTBOOT
+               This enables the USB part of the fastboot gadget
+

                CONFIG_CMD_FASTBOOT
                This enables the command "fastboot" which enables the Android
                fastboot mode for the platform's USB device. Fastboot is a USB
                CONFIG_CMD_FASTBOOT
                This enables the command "fastboot" which enables the Android
                fastboot mode for the platform's USB device. Fastboot is a USB


@@ -1841,12 +1832,12 @@ The following options need to be configured:
                This enables support for booting images which use the Android
                image format header.
 
                This enables support for booting images which use the Android
                image format header.
 

-               CONFIG_USB_FASTBOOT_BUF_ADDR
+               CONFIG_FASTBOOT_BUF_ADDR

                The fastboot protocol requires a large memory buffer for
                downloads. Define this to the starting RAM address to use for
                downloaded images.
 
                The fastboot protocol requires a large memory buffer for
                downloads. Define this to the starting RAM address to use for
                downloaded images.
 

-               CONFIG_USB_FASTBOOT_BUF_SIZE
+               CONFIG_FASTBOOT_BUF_SIZE

                The fastboot protocol requires a large memory buffer for
                downloads. This buffer should be as large as possible for a
                platform. Define this to the size available RAM for fastboot.
                The fastboot protocol requires a large memory buffer for
                downloads. This buffer should be as large as possible for a
                platform. Define this to the size available RAM for fastboot.


@@ -2220,18 +2211,6 @@ CBFS (Coreboot Filesystem) support
                Some PHY like Intel LXT971A need extra delay after
                command issued before MII status register can be read
 
                Some PHY like Intel LXT971A need extra delay after
                command issued before MII status register can be read
 

-- Ethernet address:
-               CONFIG_ETHADDR
-               CONFIG_ETH1ADDR
-               CONFIG_ETH2ADDR
-               CONFIG_ETH3ADDR
-               CONFIG_ETH4ADDR
-               CONFIG_ETH5ADDR
-
-               Define a default value for Ethernet address to use
-               for the respective Ethernet interface, in case this
-               is not determined automatically.
-

 - IP address:
                CONFIG_IPADDR
 
 - IP address:
                CONFIG_IPADDR
 


@@ -2997,8 +2976,8 @@ CBFS (Coreboot Filesystem) support
                completely disabled. Anybody can change or delete
                these parameters.
 
                completely disabled. Anybody can change or delete
                these parameters.
 

-               Alternatively, if you #define _both_ CONFIG_ETHADDR
-               _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default
+               Alternatively, if you define _both_ an ethaddr in the
+               default env _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default

                Ethernet address is installed in the environment,
                which can be changed exactly ONCE by the user. [The
                serial# is unaffected by this, i. e. it remains
                Ethernet address is installed in the environment,
                which can be changed exactly ONCE by the user. [The
                serial# is unaffected by this, i. e. it remains


@@ -3172,6 +3151,19 @@ CBFS (Coreboot Filesystem) support
                this is instead controlled by the value of
                /config/load-environment.
 
                this is instead controlled by the value of
                /config/load-environment.
 

+- Parallel Flash support:
+               CONFIG_SYS_NO_FLASH
+
+               Traditionally U-boot was run on systems with parallel NOR
+               flash. This option is used to disable support for parallel NOR
+               flash. This option should be defined if the board does not have
+               parallel flash.
+
+               If this option is not defined one of the generic flash drivers
+               (e.g.  CONFIG_FLASH_CFI_DRIVER or CONFIG_ST_SMI) must be
+               selected or the board must provide an implementation of the
+               flash API (see include/flash.h).
+

 - DataFlash Support:
                CONFIG_HAS_DATAFLASH
 
 - DataFlash Support:
                CONFIG_HAS_DATAFLASH
 


@@ -3203,11 +3195,6 @@ CBFS (Coreboot Filesystem) support
                Define this option to include a destructive SPI flash
                test ('sf test').
 
                Define this option to include a destructive SPI flash
                test ('sf test').
 

-               CONFIG_SPI_FLASH_BAR            Ban/Extended Addr Reg
-
-               Define this option to use the Bank addr/Extended addr
-               support on SPI flashes which has size > 16Mbytes.
-

                CONFIG_SF_DUAL_FLASH            Dual flash memories
 
                Define this option to use dual flash support where two flash
                CONFIG_SF_DUAL_FLASH            Dual flash memories
 
                Define this option to use dual flash support where two flash


@@ -4275,6 +4262,10 @@ Configuration Settings:
                list, simply add an entry for the same variable name to the
                ".flags" variable.
 
                list, simply add an entry for the same variable name to the
                ".flags" variable.
 

+       If CONFIG_REGEX is defined, the variable_name above is evaluated as a
+       regular expression. This allows multiple variables to define the same
+       flags without explicitly listing them for each variable.
+

 - CONFIG_ENV_ACCESS_IGNORE_FORCE
        If defined, don't allow the -f switch to env set override variable
        access flags.
 - CONFIG_ENV_ACCESS_IGNORE_FORCE
        If defined, don't allow the -f switch to env set override variable
        access flags.


@@ -5188,6 +5179,33 @@ within that device.
        normal addressable memory via the LBC. CONFIG_SYS_LS_MC_FW_ADDR is the
        virtual address in NOR flash.
 
        normal addressable memory via the LBC. CONFIG_SYS_LS_MC_FW_ADDR is the
        virtual address in NOR flash.
 

+Freescale Layerscape Debug Server Support:
+-------------------------------------------
+The Freescale Layerscape Debug Server Support supports the loading of
+"Debug Server firmware" and triggering SP boot-rom.
+This firmware often needs to be loaded during U-Boot booting.
+
+- CONFIG_FSL_DEBUG_SERVER
+       Enable the Debug Server for Layerscape SoCs.
+
+- CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE
+       Define minimum DDR size required for debug server image
+
+- CONFIG_SYS_MEM_TOP_HIDE_MIN
+       Define minimum DDR size to be hided from top of the DDR memory
+
+Reproducible builds
+-------------------
+
+In order to achieve reproducible builds, timestamps used in the U-Boot build
+process have to be set to a fixed value.
+
+This is done using the SOURCE_DATE_EPOCH environment variable.
+SOURCE_DATE_EPOCH is to be set on the build host's shell, not as a configuration
+option for U-Boot or an environment variable in U-Boot.
+
+SOURCE_DATE_EPOCH should be set to a number of seconds since the epoch, in UTC.
+

 Building the Software:
 ======================
 
 Building the Software:
 ======================
 


@@ -5673,6 +5691,10 @@ override any association in the static list. You can define
 CONFIG_ENV_CALLBACK_LIST_DEFAULT to a list (string) to define the
 ".callbacks" environment variable in the default or embedded environment.
 
 CONFIG_ENV_CALLBACK_LIST_DEFAULT to a list (string) to define the
 ".callbacks" environment variable in the default or embedded environment.
 

+If CONFIG_REGEX is defined, the variable_name above is evaluated as a
+regular expression. This allows multiple variables to be connected to
+the same callback without explicitly listing them all out.
+

 
 Command Line Parsing:
 =====================
 
 Command Line Parsing:
 =====================


@@ -5747,7 +5769,8 @@ o If both the SROM and the environment contain a MAC address, and the
   warning is printed.
 
 o If neither SROM nor the environment contain a MAC address, an error
   warning is printed.
 
 o If neither SROM nor the environment contain a MAC address, an error

-  is raised.
+  is raised. If CONFIG_NET_RANDOM_ETHADDR is defined, then in this case
+  a random, locally-assigned MAC is used.

 
 If Ethernet drivers implement the 'write_hwaddr' function, valid MAC addresses
 will be programmed into hardware as part of the initialization process.         This
 
 If Ethernet drivers implement the 'write_hwaddr' function, valid MAC addresses
 will be programmed into hardware as part of the initialization process.         This