directory according to the instructions in cogent/README.
+Sandbox Environment:
+--------------------
+
+U-Boot can be built natively to run on a Linux host using the 'sandbox'
+board. This allows feature development which is not board- or architecture-
+specific to be undertaken on a native platform. The sandbox is also used to
+run some of U-Boot's tests.
+
+See board/sandbox/sandbox/README.sandbox for more details.
+
+
Configuration Options:
----------------------
the LCD display every second with
a "rotator" |\-/|\-/
-- Board flavour: (if CONFIG_MPC8260ADS is defined)
- CONFIG_ADSTYPE
- Possible values are:
- CONFIG_SYS_8260ADS - original MPC8260ADS
- CONFIG_SYS_8266ADS - MPC8266ADS
- CONFIG_SYS_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR
- CONFIG_SYS_8272ADS - MPC8272ADS
-
- Marvell Family Member
CONFIG_SYS_MVFS - define it if you want to enable
multiple fs option at one time
supported, core will start to execute uboot when wakes up.
- Generic CPU options:
+ CONFIG_SYS_GENERIC_GLOBAL_DATA
+ Defines global data is initialized in generic board board_init_f().
+ If this macro is defined, global data is created and cleared in
+ generic board board_init_f(). Without this macro, architecture/board
+ should initialize global data before calling board_init_f().
+
CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
Defines the endianess of the CPU. Implementation of those
boot loader that has already initialized the UART. Define this
variable to flush the UART at init time.
+ CONFIG_SERIAL_HW_FLOW_CONTROL
+
+ Define this variable to enable hw flow control in serial driver.
+ Current user of this option is drivers/serial/nsl16550.c driver
- Console Interface:
Depending on board, define exactly one serial port
CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the
txfilltuning field in the EHCI controller on reset.
- CONFIG_USB_HUB_MIN_POWER_ON_DELAY defines the minimum
- interval for usb hub power-on delay.(minimum 100msec)
-
- USB Device:
Define the below if you wish to use the USB console.
Once firmware is rebuilt from a serial console issue the
CONFIG_SH_MMCIF_CLK
Define the clock frequency for MMCIF
+ CONFIG_GENERIC_MMC
+ Enable the generic MMC driver
+
+ CONFIG_SUPPORT_EMMC_BOOT
+ Enable some additional features of the eMMC boot partitions.
+
+ CONFIG_SUPPORT_EMMC_RPMB
+ Enable the commands for reading, writing and programming the
+ key for the Replay Protection Memory Block partition in eMMC.
+
- USB Device Firmware Update (DFU) class support:
CONFIG_DFU_FUNCTION
This enables the USB portion of the DFU USB class
entering dfuMANIFEST state. Host waits this timeout, before
sending again an USB request to the device.
+- USB Device Android Fastboot support:
+ CONFIG_CMD_FASTBOOT
+ This enables the command "fastboot" which enables the Android
+ fastboot mode for the platform's USB device. Fastboot is a USB
+ protocol for downloading images, flashing and device control
+ used on Android devices.
+ See doc/README.android-fastboot for more information.
+
+ CONFIG_ANDROID_BOOT_IMAGE
+ This enables support for booting images which use the Android
+ image format header.
+
+ CONFIG_USB_FASTBOOT_BUF_ADDR
+ The fastboot protocol requires a large memory buffer for
+ downloads. Define this to the starting RAM address to use for
+ downloaded images.
+
+ CONFIG_USB_FASTBOOT_BUF_SIZE
+ The fastboot protocol requires a large memory buffer for
+ downloads. This buffer should be as large as possible for a
+ platform. Define this to the size available RAM for fastboot.
+
- Journaling Flash filesystem support:
CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
CONFIG_JFFS2_NAND_DEV
filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls
and cbfsload.
+- FAT(File Allocation Table) filesystem cluster size:
+ CONFIG_FS_FAT_MAX_CLUSTSIZE
+
+ Define the max cluster size for fat operations else
+ a default value of 65536 will be defined.
+
- Keyboard Support:
CONFIG_ISA_KEYBOARD
Specify the number of FPGA devices to support.
+ CONFIG_CMD_FPGA_LOADMK
+
+ Enable support for fpga loadmk command
+
+ CONFIG_CMD_FPGA_LOADP
+
+ Enable support for fpga loadp command - load partial bitstream
+
+ CONFIG_CMD_FPGA_LOADBP
+
+ Enable support for fpga loadbp command - load partial bitstream
+ (Xilinx only)
+
CONFIG_SYS_FPGA_PROG_FEEDBACK
Enable printing of hash marks during FPGA configuration.
-150 common/cmd_nand.c Incorrect FIT image format
151 common/cmd_nand.c FIT image format OK
+- legacy image format:
+ CONFIG_IMAGE_FORMAT_LEGACY
+ enables the legacy image format support in U-Boot.
+
+ Default:
+ enabled if CONFIG_FIT_SIGNATURE is not defined.
+
+ CONFIG_DISABLE_IMAGE_LEGACY
+ disable the legacy image format
+
+ This define is introduced, as the legacy image format is
+ enabled per default for backward compatibility.
+
- FIT image support:
CONFIG_FIT
Enable support for the FIT uImage format.
using a hash signed and verified using RSA. See
doc/uImage.FIT/signature.txt for more details.
+ WARNING: When relying on signed FIT images with required
+ signature check the legacy image format is default
+ disabled. If a board need legacy image format support
+ enable this through CONFIG_IMAGE_FORMAT_LEGACY
+
- Standalone program support:
CONFIG_STANDALONE_LOAD_ADDR
supports MMC, NAND and YMODEM loading of U-Boot and NAND
NAND loading of the Linux Kernel.
+ CONFIG_SPL_OS_BOOT
+ Enable booting directly to an OS from SPL.
+ See also: doc/README.falcon
+
CONFIG_SPL_DISPLAY_PRINT
For ARM, enable an optional function to print more information
about the running system.
Support for NAND boot using simple NAND drivers that
expose the cmd_ctrl() interface.
+ CONFIG_SPL_MTD_SUPPORT
+ Support for the MTD subsystem within SPL. Useful for
+ environment on NAND support within SPL.
+
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
Set for the SPL on PPC mpc8xxx targets, support for
drivers/ddr/fsl/libddr.o in SPL binary.
- CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
Enables the RTC32K OSC on AM33xx based plattforms
+- CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
+ Option to disable subpage write in NAND driver
+ driver that uses this:
+ drivers/mtd/nand/davinci_nand.c
+
Freescale QE/FMAN Firmware Support:
-----------------------------------
projects / karo-tx-uboot.git / blobdiff