- arm925t Files specific to ARM 925 CPUs
- arm926ejs Files specific to ARM 926 CPUs
- arm1136 Files specific to ARM 1136 CPUs
+ - at32ap Files specific to Atmel AVR32 AP CPUs
- i386 Files specific to i386 CPUs
- ixp Files specific to Intel XScale IXP CPUs
- mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs
- examples Example code for standalone applications, etc.
- include Header Files
- lib_arm Files generic to ARM architecture
+- lib_avr32 Files generic to AVR32 architecture
- lib_generic Files generic to all architectures
- lib_i386 Files generic to i386 architecture
- lib_m68k Files generic to m68k architecture
CONFIG_SA1110
CONFIG_ARM7
CONFIG_PXA250
+ CONFIG_CPU_MONAHANS
MicroBlaze based CPUs:
----------------------
----------------------
CONFIG_NIOS2
+ AVR32 based CPUs:
+ ----------------------
+ CONFIG_AT32AP
- Board Type: Define exactly one of
PowerPC based boards:
---------------------
- CONFIG_ADCIOP CONFIG_GEN860T CONFIG_PCIPPC2
- CONFIG_ADS860 CONFIG_GENIETV CONFIG_PCIPPC6
- CONFIG_AMX860 CONFIG_GTH CONFIG_pcu_e
- CONFIG_AP1000 CONFIG_gw8260 CONFIG_PIP405
- CONFIG_AR405 CONFIG_hermes CONFIG_PM826
- CONFIG_BAB7xx CONFIG_hymod CONFIG_ppmc8260
- CONFIG_c2mon CONFIG_IAD210 CONFIG_QS823
- CONFIG_CANBT CONFIG_ICU862 CONFIG_QS850
- CONFIG_CCM CONFIG_IP860 CONFIG_QS860T
- CONFIG_CMI CONFIG_IPHASE4539 CONFIG_RBC823
- CONFIG_cogent_mpc8260 CONFIG_IVML24 CONFIG_RPXClassic
- CONFIG_cogent_mpc8xx CONFIG_IVML24_128 CONFIG_RPXlite
- CONFIG_CPCI405 CONFIG_IVML24_256 CONFIG_RPXsuper
- CONFIG_CPCI4052 CONFIG_IVMS8 CONFIG_rsdproto
- CONFIG_CPCIISER4 CONFIG_IVMS8_128 CONFIG_sacsng
- CONFIG_CPU86 CONFIG_IVMS8_256 CONFIG_Sandpoint8240
- CONFIG_CRAYL1 CONFIG_JSE CONFIG_Sandpoint8245
- CONFIG_CSB272 CONFIG_LANTEC CONFIG_sbc8260
- CONFIG_CU824 CONFIG_lwmon CONFIG_sbc8560
- CONFIG_DASA_SIM CONFIG_MBX CONFIG_SM850
- CONFIG_DB64360 CONFIG_MBX860T CONFIG_SPD823TS
- CONFIG_DB64460 CONFIG_MHPC CONFIG_STXGP3
- CONFIG_DU405 CONFIG_MIP405 CONFIG_SXNI855T
- CONFIG_DUET_ADS CONFIG_MOUSSE CONFIG_TQM823L
- CONFIG_EBONY CONFIG_MPC8260ADS CONFIG_TQM8260
- CONFIG_ELPPC CONFIG_MPC8540ADS CONFIG_TQM850L
- CONFIG_ELPT860 CONFIG_MPC8540EVAL CONFIG_TQM855L
- CONFIG_ep8260 CONFIG_MPC8560ADS CONFIG_TQM860L
- CONFIG_ERIC CONFIG_MUSENKI CONFIG_TTTech
- CONFIG_ESTEEM192E CONFIG_MVS1 CONFIG_UTX8245
- CONFIG_ETX094 CONFIG_NETPHONE CONFIG_V37
- CONFIG_EVB64260 CONFIG_NETTA CONFIG_W7OLMC
- CONFIG_FADS823 CONFIG_NETVIA CONFIG_W7OLMG
- CONFIG_FADS850SAR CONFIG_NX823 CONFIG_WALNUT
- CONFIG_FADS860T CONFIG_OCRTC CONFIG_ZPC1900
- CONFIG_FLAGADM CONFIG_ORSG CONFIG_ZUMA
- CONFIG_FPS850L CONFIG_OXC
- CONFIG_FPS860L CONFIG_PCI405
+ CONFIG_ADCIOP CONFIG_FPS860L CONFIG_OXC
+ CONFIG_ADS860 CONFIG_GEN860T CONFIG_PCI405
+ CONFIG_AMX860 CONFIG_GENIETV CONFIG_PCIPPC2
+ CONFIG_AP1000 CONFIG_GTH CONFIG_PCIPPC6
+ CONFIG_AR405 CONFIG_gw8260 CONFIG_pcu_e
+ CONFIG_BAB7xx CONFIG_hermes CONFIG_PIP405
+ CONFIG_BC3450 CONFIG_hymod CONFIG_PM826
+ CONFIG_c2mon CONFIG_IAD210 CONFIG_ppmc8260
+ CONFIG_CANBT CONFIG_ICU862 CONFIG_QS823
+ CONFIG_CCM CONFIG_IP860 CONFIG_QS850
+ CONFIG_CMI CONFIG_IPHASE4539 CONFIG_QS860T
+ CONFIG_cogent_mpc8260 CONFIG_IVML24 CONFIG_RBC823
+ CONFIG_cogent_mpc8xx CONFIG_IVML24_128 CONFIG_RPXClassic
+ CONFIG_CPCI405 CONFIG_IVML24_256 CONFIG_RPXlite
+ CONFIG_CPCI4052 CONFIG_IVMS8 CONFIG_RPXsuper
+ CONFIG_CPCIISER4 CONFIG_IVMS8_128 CONFIG_rsdproto
+ CONFIG_CPU86 CONFIG_IVMS8_256 CONFIG_sacsng
+ CONFIG_CRAYL1 CONFIG_JSE CONFIG_Sandpoint8240
+ CONFIG_CSB272 CONFIG_LANTEC CONFIG_Sandpoint8245
+ CONFIG_CU824 CONFIG_LITE5200B CONFIG_sbc8260
+ CONFIG_DASA_SIM CONFIG_lwmon CONFIG_sbc8560
+ CONFIG_DB64360 CONFIG_MBX CONFIG_SM850
+ CONFIG_DB64460 CONFIG_MBX860T CONFIG_SPD823TS
+ CONFIG_DU405 CONFIG_MHPC CONFIG_STXGP3
+ CONFIG_DUET_ADS CONFIG_MIP405 CONFIG_SXNI855T
+ CONFIG_EBONY CONFIG_MOUSSE CONFIG_TQM823L
+ CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM8260
+ CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM850L
+ CONFIG_ep8260 CONFIG_MPC8540EVAL CONFIG_TQM855L
+ CONFIG_ERIC CONFIG_MPC8560ADS CONFIG_TQM860L
+ CONFIG_ESTEEM192E CONFIG_MUSENKI CONFIG_TTTech
+ CONFIG_ETX094 CONFIG_MVS1 CONFIG_UTX8245
+ CONFIG_EVB64260 CONFIG_NETPHONE CONFIG_V37
+ CONFIG_FADS823 CONFIG_NETTA CONFIG_W7OLMC
+ CONFIG_FADS850SAR CONFIG_NETVIA CONFIG_W7OLMG
+ CONFIG_FADS860T CONFIG_NX823 CONFIG_WALNUT
+ CONFIG_FLAGADM CONFIG_OCRTC CONFIG_ZPC1900
+ CONFIG_FPS850L CONFIG_ORSG CONFIG_ZUMA
ARM based boards:
-----------------
CONFIG_ARMADILLO, CONFIG_AT91RM9200DK, CONFIG_CERF250,
- CONFIG_CSB637, CONFIG_DNP1110, CONFIG_EP7312,
- CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, CONFIG_IMPA7,
- CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, CONFIG_KB9202,
- CONFIG_LART, CONFIG_LPD7A400, CONFIG_LUBBOCK,
- CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, CONFIG_SHANNON,
- CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410,
- CONFIG_TRAB, CONFIG_VCMA9
+ CONFIG_CSB637, CONFIG_DELTA, CONFIG_DNP1110,
+ CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE,
+ CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
+ CONFIG_KB9202, CONFIG_LART, CONFIG_LPD7A400,
+ CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4,
+ CONFIG_PLEB2, CONFIG_SHANNON, CONFIG_P2_OMAP730,
+ CONFIG_SMDK2400, CONFIG_SMDK2410, CONFIG_TRAB,
+ CONFIG_VCMA9
MicroBlaze based boards:
------------------------
------------------------
CONFIG_PCI5441 CONFIG_PK1C20
+ CONFIG_EP1C20 CONFIG_EP1S10 CONFIG_EP1S40
+
+ AVR32 based boards:
+ -------------------
+
+ CONFIG_ATSTK1000
+
+- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
+ Define exactly one of
+ CONFIG_ATSTK1002
- CPU Module Type: (if CONFIG_COGENT is defined)
that this requires a (stable) reference clock (32 kHz
RTC clock or CFG_8XX_XIN)
+- Intel Monahans options:
+ CFG_MONAHANS_RUN_MODE_OSC_RATIO
+
+ Defines the Monahans run mode to oscillator
+ ratio. Valid values are 8, 16, 24, 31. The core
+ frequency is this value multiplied by 13 MHz.
+
+ CFG_MONAHANS_TURBO_RUN_MODE_RATIO
+
+ Defines the Monahans turbo mode to oscillator
+ ratio. Valid values are 1 (default if undefined) and
+ 2. The core frequency as calculated above is multiplied
+ by this value.
+
- Linux Kernel Interface:
CONFIG_CLOCKS_IN_MHZ
Space should be pre-allocated in the dts for the bd_t.
CONFIG_OF_HAS_UBOOT_ENV
-
+
The resulting flat device tree will have a copy of u-boot's
environment variables
Board code has addition modification that it wants to make
to the flat device tree before handing it off to the kernel
+ CONFIG_OF_BOOT_CPU
+
+ This define fills in the correct boot cpu in the boot
+ param header, the default value is zero if undefined.
+
- Serial Ports:
CFG_PL010_SERIAL
CFG_CMD_DIAG * Diagnostics
CFG_CMD_DOC * Disk-On-Chip Support
CFG_CMD_DTT * Digital Therm and Thermostat
- CFG_CMD_ECHO * echo arguments
+ CFG_CMD_ECHO echo arguments
CFG_CMD_EEPROM * EEPROM read/write support
CFG_CMD_ELF * bootelf, bootvx
CFG_CMD_ENV saveenv
default value of 5 is used.
- Command Interpreter:
- CFG_AUTO_COMPLETE
+ CONFIG_AUTO_COMPLETE
Enable auto completion of commands using TAB.
+ Note that this feature has NOT been implemented yet
+ for the "hush" shell.
+
+
CFG_HUSH_PARSER
Define this variable to enable the "hush" shell (from
of the backslashes before semicolons and special
symbols.
+- Commandline Editing and History:
+ CONFIG_CMDLINE_EDITING
+
+ Enable editiong and History functions for interactive
+ commandline input operations
+
- Default Environment:
CONFIG_EXTRA_ENV_SETTINGS
- CFG_MALLOC_LEN:
Size of DRAM reserved for malloc() use.
+- CFG_BOOTM_LEN:
+ Normally compressed uImages are limited to an
+ uncompressed size of 8 MBytes. If this is not enough,
+ you can define CFG_BOOTM_LEN in your board config file
+ to adjust this setting to your needs.
+
- CFG_BOOTMAPSZ:
Maximum size of memory mapped by the startup code of
the Linux kernel; all data that must be processed by
These two #defines specify the offset and size of the environment
area within the first NAND device.
+ - CFG_ENV_OFFSET_REDUND
+
+ This setting describes a second storage area of CFG_ENV_SIZE
+ size used to hold a redundant copy of the environment data,
+ so that there is a valid backup copy in case there is a
+ power failure during a "saveenv" operation.
+
+ Note: CFG_ENV_OFFSET and CFG_ENV_OFFSET_REDUND must be aligned
+ to a block boundary, and CFG_ENV_SIZE must be a multiple of
+ the NAND devices block size.
+
- CFG_SPI_INIT_OFFSET
Defines offset to the initial SPI buffer area in DPRAM. The
- "u-boot" is an image in ELF binary format
- "u-boot.srec" is in Motorola S-Record format
+By default the build is performed locally and the objects are saved
+in the source directory. One of the two methods can be used to change
+this behavior and build U-Boot to some external directory:
+
+1. Add O= to the make command line invocations:
+
+ make O=/tmp/build distclean
+ make O=/tmp/build NAME_config
+ make O=/tmp/build all
+
+2. Set environment variable BUILD_DIR to point to the desired location:
+
+ export BUILD_DIR=/tmp/build
+ make distclean
+ make NAME_config
+ make all
+
+Note that the command line "O=" setting overrides the BUILD_DIR environment
+variable.
+
Please be aware that the Makefiles assume you are using GNU make, so
for instance on NetBSD you might need to use "gmake" instead of
CROSS_COMPILE=' ' MAKEALL
+When using the MAKEALL script, the default behaviour is to build U-Boot
+in the source directory. This location can be changed by setting the
+BUILD_DIR environment variable. Also, for each target built, the MAKEALL
+script saves two log files (<target>.ERR and <target>.MAKEALL) in the
+<source dir>/LOG directory. This default location can be changed by
+setting the MAKEALL_LOGDIR environment variable. For example:
+
+ export BUILD_DIR=/tmp/build
+ export MAKEALL_LOGDIR=/tmp/log
+ CROSS_COMPILE=ppc_8xx- MAKEALL
+
+With the above settings build objects are saved in the /tmp/build, log
+files are saved in the /tmp/log and the source tree remains clean during
+the whole build process.
+
+
See also "U-Boot Porting Guide" below.
4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks,
LynxOS, pSOS, QNX, RTEMS, ARTOS;
Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS, LynxOS).
-* Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
+* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86,
IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
- Currently supported: ARM, Intel x86, MIPS, NIOS, PowerPC).
+ Currently supported: ARM, AVR32, Intel x86, MIPS, NIOS, PowerPC).
* Compression Type (uncompressed, gzip, bzip2)
* Load Address
* Entry Point
bash#
+Boot Linux and pass a flat device tree:
+-----------
+
+First, U-Boot must be compiled with the appropriate defines. See the section
+titled "Linux Kernel Interface" above for a more in depth explanation. The
+following is an example of how to start a kernel and pass an updated
+flat device tree:
+
+=> print oftaddr
+oftaddr=0x300000
+=> print oft
+oft=oftrees/mpc8540ads.dtb
+=> tftp $oftaddr $oft
+Speed: 1000, full duplex
+Using TSEC0 device
+TFTP from server 192.168.1.1; our IP address is 192.168.1.101
+Filename 'oftrees/mpc8540ads.dtb'.
+Load address: 0x300000
+Loading: #
+done
+Bytes transferred = 4106 (100a hex)
+=> tftp $loadaddr $bootfile
+Speed: 1000, full duplex
+Using TSEC0 device
+TFTP from server 192.168.1.1; our IP address is 192.168.1.2
+Filename 'uImage'.
+Load address: 0x200000
+Loading:############
+done
+Bytes transferred = 1029407 (fb51f hex)
+=> print loadaddr
+loadaddr=200000
+=> print oftaddr
+oftaddr=0x300000
+=> bootm $loadaddr - $oftaddr
+## Booting image at 00200000 ...
+ Image Name: Linux-2.6.17-dirty
+ Image Type: PowerPC Linux Kernel Image (gzip compressed)
+ Data Size: 1029343 Bytes = 1005.2 kB
+ Load Address: 00000000
+ Entry Point: 00000000
+ Verifying Checksum ... OK
+ Uncompressing Kernel Image ... OK
+Booting using flat device tree at 0x300000
+Using MPC85xx ADS machine description
+Memory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb
+[snip]
+
+
More About U-Boot Image Types:
------------------------------
==> U-Boot will use R8 to hold a pointer to the global data
+NOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope,
+or current versions of GCC may "optimize" the code too much.
Memory Management:
------------------
-----------------
All contributions to U-Boot should conform to the Linux kernel
-coding style; see the file "Documentation/CodingStyle" in your Linux
-kernel source directory.
-
-Please note that U-Boot is implemented in C (and to some small parts
-in Assembler); no C++ is used, so please do not use C++ style
-comments (//) in your code.
+coding style; see the file "Documentation/CodingStyle" and the script
+"scripts/Lindent" in your Linux kernel source directory. In sources
+originating from U-Boot a style corresponding to "Lindent -pcs" (adding
+spaces before parameters to function calls) is actually used.
+
+Source files originating from a different project (for example the
+MTD subsystem) are generally exempt from these guidelines and are not
+reformated to ease subsequent migration to newer versions of those
+sources.
+
+Please note that U-Boot is implemented in C (and to some small parts in
+Assembler); no C++ is used, so please do not use C++ style comments (//)
+in your code.
Please also stick to the following formatting rules:
- remove any trailing white space
projects / karo-tx-uboot.git / blobdiff