Add generic support for samsung s3c2440

[karo-tx-uboot.git] / arch / arm / cpu / arm920t / s3c24x0 / usb.c

diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb.c b/arch/arm/cpu/arm920t/s3c24x0/usb.c
index e468ed08fc4d22bf9a3341f50400fa111e79ca38..226a3f6c90cbb73c9a34313fd8657d06b108bf78 100644 (file)
--- a/arch/arm/cpu/arm920t/s3c24x0/usb.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/usb.c
@@ -39,14 +39,14 @@ int usb_cpu_init(void)
         * Set the 48 MHz UPLL clocking. Values are taken from
         * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
         */
-       writel((40 << 12) + (1 << 4) + 2, &clk_power->UPLLCON);
+       writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon);
        /* 1 = use pads related USB for USB host */
-       writel(readl(&gpio->MISCCR) | 0x8, &gpio->MISCCR);
+       writel(readl(&gpio->misccr) | 0x8, &gpio->misccr);
 
        /*
         * Enable USB host clock.
         */
-       writel(readl(&clk_power->CLKCON) | (1 << 4), &clk_power->CLKCON);
+       writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
 
        return 0;
 }
@@ -55,14 +55,14 @@ int usb_cpu_stop(void)
 {
        struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
        /* may not want to do this */
-       writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON);
+       writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
        return 0;
 }
 
 int usb_cpu_init_fail(void)
 {
        struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-       writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON);
+       writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
        return 0;
 }