*
* Aneesh V <aneesh@ti.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/emif.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/omap_common.h>
#include <asm/utils.h>
writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
- if (omap_revision() >= OMAP5430_ES1_0) {
+ if ((omap_revision() >= OMAP5430_ES1_0) ||
+ (omap_revision() == DRA752_ES1_0)) {
writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0,
&emif->emif_l3_config);
} else if (omap_revision() >= OMAP4460_ES1_0) {
__udelay(130);
}
+static void ddr3_sw_leveling(u32 base, const struct emif_regs *regs)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+ writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
+ writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+ config_data_eye_leveling_samples(base);
+
+ writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl);
+ writel(regs->sdram_config, &emif->emif_sdram_config);
+}
+
static void ddr3_init(u32 base, const struct emif_regs *regs)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
* defined, contents of mode Registers must be fully initialized.
* H/W takes care of this initialization
*/
+ writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
writel(regs->sdram_config_init, &emif->emif_sdram_config);
writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
/* enable leveling */
writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl);
- ddr3_leveling(base, regs);
+ if (omap_revision() == DRA752_ES1_0)
+ ddr3_sw_leveling(base, regs);
+ else
+ ddr3_leveling(base, regs);
}
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
return phy;
}
-static u32 get_emif_mem_size(struct emif_device_details *devices)
+static u32 get_emif_mem_size(u32 base)
{
u32 size_mbytes = 0, temp;
+ struct emif_device_details dev_details;
+ struct lpddr2_device_details cs0_dev_details, cs1_dev_details;
+ u32 emif_nr = emif_num(base);
- if (!devices)
- return 0;
+ emif_reset_phy(base);
+ dev_details.cs0_device_details = emif_get_device_details(emif_nr, CS0,
+ &cs0_dev_details);
+ dev_details.cs1_device_details = emif_get_device_details(emif_nr, CS1,
+ &cs1_dev_details);
+ emif_reset_phy(base);
- if (devices->cs0_device_details) {
- temp = devices->cs0_device_details->density;
+ if (dev_details.cs0_device_details) {
+ temp = dev_details.cs0_device_details->density;
size_mbytes += lpddr2_density_2_size_in_mbytes[temp];
}
- if (devices->cs1_device_details) {
- temp = devices->cs1_device_details->density;
+ if (dev_details.cs1_device_details) {
+ temp = dev_details.cs1_device_details->density;
size_mbytes += lpddr2_density_2_size_in_mbytes[temp];
}
/* convert to bytes */
/* Return if no devices on this EMIF */
if (!dev_details.cs0_device_details &&
!dev_details.cs1_device_details) {
- emif_sizes[emif_nr - 1] = 0;
return;
}
- if (!in_sdram)
- emif_sizes[emif_nr - 1] = get_emif_mem_size(&dev_details);
-
/*
* Get device timings:
* - Default timings specified by JESD209-2 if
else
ddr3_init(base, regs);
}
+ if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) {
+ set_lpmode_selfrefresh(base);
+ emif_reset_phy(base);
+ if (omap_revision() == DRA752_ES1_0)
+ ddr3_sw_leveling(base, regs);
+ else
+ ddr3_leveling(base, regs);
+ }
/* Write to the shadow registers */
emif_update_timings(base, regs);
mapped_size = 0;
section_cnt = 3;
sys_addr = CONFIG_SYS_SDRAM_BASE;
- emif1_size = emif_sizes[0];
- emif2_size = emif_sizes[1];
+ emif1_size = get_emif_mem_size(EMIF1_BASE);
+ emif2_size = get_emif_mem_size(EMIF2_BASE);
debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size);
if (!emif1_size && !emif2_size)
/* TRAP for invalid TILER mappings in section 0 */
lis_map_regs_calculated.dmm_lisa_map_0 = DMM_LISA_MAP_0_INVAL_ADDR_TRAP;
+ if (omap_revision() >= OMAP4460_ES1_0)
+ lis_map_regs_calculated.is_ma_present = 1;
+
lisa_map_regs = &lis_map_regs_calculated;
#endif
struct dmm_lisa_map_regs *hw_lisa_map_regs =
in_sdram = running_from_sdram();
debug("in_sdram = %d\n", in_sdram);
- if (!(in_sdram || warm_reset())) {
- if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2)
+ if (!in_sdram) {
+ if ((sdram_type == EMIF_SDRAM_TYPE_LPDDR2) && !warm_reset())
bypass_dpll((*prcm)->cm_clkmode_dpll_core);
- else
+ else if (sdram_type == EMIF_SDRAM_TYPE_DDR3)
writel(CM_DLL_CTRL_NO_OVERRIDE, (*prcm)->cm_dll_ctrl);
}
projects / karo-tx-uboot.git / blobdiff