TX6 Release 2013-04-22

[karo-tx-uboot.git] / arch / arm / cpu / armv7 / start.S

diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 7df97c5a3a663a88c01e68ffcfb7b91e4bbcc6b8..0eebe226905785e8e4c990050e7720d35186d873 100644 (file)
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -81,7 +81,7 @@ _end_vect:
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-       .word   CONFIG_SYS_TEXT_BASE
+       .word   _start
 
 /*
  * These are defined in the board-specific linker script.
@@ -155,12 +155,7 @@ reset:
        bl      cpu_init_crit
 #endif
 
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
-       ldr     sp, =(CONFIG_SYS_INIT_SP_ADDR)
-       bic     sp, sp, #7 /* 8-byte alignment for ABI compliance */
-       ldr     r0,=0x00000000
-       bl      board_init_f
+       bl      _main
 
 /*------------------------------------------------------------------------------*/
 
@@ -177,14 +172,9 @@ ENTRY(relocate_code)
        mov     r5, r1  /* save addr of gd */
        mov     r6, r2  /* save addr of destination */
 
-       /* Set up the stack                                                 */
-stack_setup:
-       mov     sp, r4
-
        adr     r0, _start
-       cmp     r0, r6
-       moveq   r9, #0          /* no relocation. relocation offset(r9) = 0 */
-       beq     clear_bss               /* skip relocation */
+       subs    r9, r6, r0
+       beq     relocate_done           /* skip relocation */
        mov     r1, r6                  /* r1 <- scratch for copy_loop */
        ldr     r3, _image_copy_end_ofs
        add     r2, r0, r3              /* r2 <- source end address         */
@@ -198,7 +188,7 @@ copy_loop:
        /*
         * fix .rel.dyn relocations
         */
-       ldr     r0, _TEXT_BASE          /* r0 <- Text base */
+       adr     r0, _start              /* r0 <- beginning of code */
        sub     r9, r6, r0              /* r9 <- relocation offset */
        ldr     r10, _dynsym_start_ofs  /* r10 <- sym table ofs */
        add     r10, r10, r0            /* r10 <- sym table in FLASH */
@@ -206,8 +196,11 @@ copy_loop:
        add     r2, r2, r0              /* r2 <- rel dyn start in FLASH */
        ldr     r3, _rel_dyn_end_ofs    /* r3 <- rel dyn end ofs */
        add     r3, r3, r0              /* r3 <- rel dyn end in FLASH */
+       mov     r4, r0
 fixloop:
        ldr     r0, [r2]                /* r0 <- location to fix up, IN FLASH! */
+       cmp     r0, r4
+       blo     skipfix
        add     r0, r0, r9              /* r0 <- location to fix up in RAM */
        ldr     r1, [r2, #4]
        and     r7, r1, #0xff
@@ -230,37 +223,26 @@ fixrel:
        add     r1, r1, r9
 fixnext:
        str     r1, [r0]
+skipfix:
        add     r2, r2, #8              /* each rel.dyn entry is 8 bytes */
        cmp     r2, r3
        blo     fixloop
-       b       clear_bss
+
+relocate_done:
+
+       bx      lr
+
 _rel_dyn_start_ofs:
        .word __rel_dyn_start - _start
 _rel_dyn_end_ofs:
        .word __rel_dyn_end - _start
 _dynsym_start_ofs:
        .word __dynsym_start - _start
+ENDPROC(relocate_code)
 
-clear_bss:
-       ldr     r0, _bss_start_ofs
-       ldr     r1, _bss_end_ofs
-       mov     r4, r6                  /* reloc addr */
-       add     r0, r0, r4
-       add     r1, r1, r4
-       mov     r2, #0x00000000         /* clear                            */
-
-clbss_l:cmp    r0, r1                  /* clear loop... */
-       bhs     clbss_e                 /* if reached end of bss, exit */
-       str     r2, [r0]
-       add     r0, r0, #4
-       b       clbss_l
-clbss_e:
+#endif
 
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-jump_2_ram:
+ENTRY(c_runtime_cpu_setup)
 /*
  * If I-cache is enabled invalidate it
  */
@@ -279,20 +261,9 @@ jump_2_ram:
        mcr     p15, 0, r0, c12, c0, 0  @Set VBAR
 #endif /* !Tegra20 */
 
-       ldr     r0, _board_init_r_ofs
-       adr     r1, _start
-       add     lr, r0, r1
-       add     lr, lr, r9
-       /* setup parameters for board_init_r */
-       mov     r0, r5          /* gd_t */
-       mov     r1, r6          /* dest_addr */
-       /* jump to it ... */
-       mov     pc, lr
-
-_board_init_r_ofs:
-       .word board_init_r - _start
-ENDPROC(relocate_code)
-#endif
+       bx      lr
+
+ENDPROC(c_runtime_cpu_setup)
 
 /*************************************************************************
  *