#ifndef __ASM_ARCH_MX5_IMX_REGS_H__
#define __ASM_ARCH_MX5_IMX_REGS_H__
+#define ARCH_MXC
+
#if defined(CONFIG_MX51)
#define IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */
-#define IPU_CTRL_BASE_ADDR 0x40000000
+#define IPU_SOC_BASE_ADDR 0x40000000
+#define IPU_SOC_OFFSET 0x1E000000
#define SPBA0_BASE_ADDR 0x70000000
#define AIPS1_BASE_ADDR 0x73F00000
#define AIPS2_BASE_ADDR 0x83F00000
#define NFC_BASE_ADDR_AXI 0xCFFF0000
#define CS1_BASE_ADDR 0xB8000000
#elif defined(CONFIG_MX53)
-#define IPU_CTRL_BASE_ADDR 0x18000000
+#define IPU_SOC_BASE_ADDR 0x18000000
+#define IPU_SOC_OFFSET 0x06000000
#define SPBA0_BASE_ADDR 0x50000000
#define AIPS1_BASE_ADDR 0x53F00000
#define AIPS2_BASE_ADDR 0x63F00000
#define NFC_BASE_ADDR_AXI 0xF7FF0000
#define IRAM_BASE_ADDR 0xF8000000
#define CS1_BASE_ADDR 0xF4000000
+#define SATA_BASE_ADDR 0x10000000
#else
#error "CPU_TYPE not defined"
#endif
*/
#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000)
#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000)
-#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000)
+#define UART3_BASE (SPBA0_BASE_ADDR + 0x0000C000)
#define CSPI1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000)
#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000)
#define MMC_SDHC3_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000)
#define EPIT2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000)
#define PWM1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000)
#define PWM2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000)
-#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000)
-#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000C0000)
+#define UART1_BASE (AIPS1_BASE_ADDR + 0x000BC000)
+#define UART2_BASE (AIPS1_BASE_ADDR + 0x000C0000)
#define SRC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D0000)
#define CCM_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D4000)
#define GPC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D8000)
#define GPIO5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000DC000)
#define GPIO6_BASE_ADDR (AIPS1_BASE_ADDR + 0x000E0000)
#define GPIO7_BASE_ADDR (AIPS1_BASE_ADDR + 0x000E4000)
+#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x000EC000)
+#define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000F0000)
#endif
/*
* AIPS 2
#define VPU_BASE_ADDR (AIPS2_BASE_ADDR + 0x000F4000)
#define SAHARA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000F8000)
+#if defined(CONFIG_MX53)
+#define UART5_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000)
+#endif
+
/*
* WEIM CSnGCR1
*/
*/
#define WBED 1
-/*
- * WEIM WCR
- */
-#define BCM 1
-#define GBCD(x) (((x) & 0x3) << 1)
-#define INTEN (1 << 4)
-#define INTPOL (1 << 5)
-#define WDOG_EN (1 << 8)
-#define WDOG_LIMIT(x) (((x) & 0x3) << 9)
-
#define CS0_128 0
#define CS0_64M_CS1_64M 1
#define CS0_64M_CS1_32M_CS2_32M 2
#define CS0_32M_CS1_32M_CS2_32M_CS3_32M 3
+/*
+ * CSPI register definitions
+ */
+#define MXC_ECSPI
+#define MXC_CSPICTRL_EN (1 << 0)
+#define MXC_CSPICTRL_MODE (1 << 1)
+#define MXC_CSPICTRL_XCH (1 << 2)
+#define MXC_CSPICTRL_MODE_MASK (0xf << 4)
+#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 12)
+#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0xfff) << 20)
+#define MXC_CSPICTRL_PREDIV(x) (((x) & 0xF) << 12)
+#define MXC_CSPICTRL_POSTDIV(x) (((x) & 0xF) << 8)
+#define MXC_CSPICTRL_SELCHAN(x) (((x) & 0x3) << 18)
+#define MXC_CSPICTRL_MAXBITS 0xfff
+#define MXC_CSPICTRL_TC (1 << 7)
+#define MXC_CSPICTRL_RXOVF (1 << 6)
+#define MXC_CSPIPERIOD_32KHZ (1 << 15)
+#define MAX_SPI_BYTES 32
+
+/* Bit position inside CTRL register to be associated with SS */
+#define MXC_CSPICTRL_CHAN 18
+
+/* Bit position inside CON register to be associated with SS */
+#define MXC_CSPICON_POL 4
+#define MXC_CSPICON_PHA 0
+#define MXC_CSPICON_SSPOL 12
+#define MXC_SPI_BASE_ADDRESSES \
+ CSPI1_BASE_ADDR, \
+ CSPI2_BASE_ADDR, \
+ CSPI3_BASE_ADDR,
+
/*
* Number of GPIO pins per port
*/
/* M4IF */
#define M4IF_FBPM0 0x40
#define M4IF_FIDBP 0x48
+#define M4IF_GENP_WEIM_MM_MASK 0x00000001
+#define WEIM_GCR2_MUX16_BYP_GRANT_MASK 0x00001000
/* Assuming 24MHz input clock with doubler ON */
/* MFI PDF */
#define DP_MFD_400 (3 - 1)
#define DP_MFN_400 1
+#define DP_OP_455 ((9 << 4) + ((2 - 1) << 0))
+#define DP_MFD_455 (48 - 1)
+#define DP_MFN_455 23
+
#define DP_OP_216 ((6 << 4) + ((3 - 1) << 0))
#define DP_MFD_216 (4 - 1)
#define DP_MFN_216 3
#define BOARD_REV_1_0 0x0
#define BOARD_REV_2_0 0x1
+#define BOARD_VER_OFFSET 0x8
+
#define IMX_IIM_BASE (IIM_BASE_ADDR)
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
u32 simr;
};
+struct srtc_regs {
+ u32 lpscmr; /* 0x00 */
+ u32 lpsclr; /* 0x04 */
+ u32 lpsar; /* 0x08 */
+ u32 lpsmcr; /* 0x0c */
+ u32 lpcr; /* 0x10 */
+ u32 lpsr; /* 0x14 */
+ u32 lppdr; /* 0x18 */
+ u32 lpgr; /* 0x1c */
+ u32 hpcmr; /* 0x20 */
+ u32 hpclr; /* 0x24 */
+ u32 hpamr; /* 0x28 */
+ u32 hpalr; /* 0x2c */
+ u32 hpcr; /* 0x30 */
+ u32 hpisr; /* 0x34 */
+ u32 hpienr; /* 0x38 */
+};
+
/* CSPI registers */
struct cspi_regs {
u32 rxdata;
u32 sdat;
u32 prev;
u32 srev;
- u32 preg_p;
+ u32 prg_p;
u32 scs0;
u32 scs1;
u32 scs2;
struct fuse_bank {
u32 fuse_regs[0x20];
u32 fuse_rsvd[0xe0];
+#if defined(CONFIG_MX51)
} bank[4];
+#elif defined(CONFIG_MX53)
+ } bank[5];
+#endif
+};
+
+struct fuse_bank0_regs {
+ u32 fuse0_7[8];
+ u32 uid[8];
+ u32 fuse16_23[8];
+#if defined(CONFIG_MX51)
+ u32 imei[8];
+#elif defined(CONFIG_MX53)
+ u32 gp[8];
+#endif
};
struct fuse_bank1_regs {
u32 fuse15_31[0x11];
};
+#if defined(CONFIG_MX53)
+struct fuse_bank4_regs {
+ u32 fuse0_4[5];
+ u32 gp[3];
+ u32 fuse8_31[0x18];
+};
+#endif
+
#endif /* __ASSEMBLER__*/
#endif /* __ASM_ARCH_MX5_IMX_REGS_H__ */
projects / karo-tx-uboot.git / blobdiff