struct i2c_pin_ctrl sda;
};
-void setup_i2c(unsigned i2c_index, int speed, int slave_addr,
- struct i2c_pads_info *p);
-void bus_i2c_init(void *base, int speed, int slave_addr,
+/*
+ * Information about i2c controller
+ * struct mxc_i2c_bus - information about the i2c[x] bus
+ * @index: i2c bus index
+ * @base: Address of I2C bus controller
+ * @driver_data: Flags for different platforms, such as I2C_QUIRK_FLAG.
+ * @speed: Speed of I2C bus
+ * @pads_info: pinctrl info for this i2c bus, will be used when pinctrl is ok.
+ * The following two is only to be compatible with non-DM part.
+ * @idle_bus_fn: function to force bus idle
+ * @idle_bus_data: parameter for idle_bus_fun
+ */
+struct mxc_i2c_bus {
+ /*
+ * board file can use this index to locate which i2c_pads_info is for
+ * i2c_idle_bus. When pinmux is implement, this entry can be
+ * discarded. Here we do not use dev->seq, because we do not want to
+ * export device to board file.
+ */
+ int index;
+ ulong base;
+ ulong driver_data;
+ int speed;
+ struct i2c_pads_info *pads_info;
+#ifndef CONFIG_DM_I2C
+ int (*idle_bus_fn)(void *p);
+ void *idle_bus_data;
+#endif
+};
+
+#if defined(CONFIG_SOC_MX6QDL)
+#define I2C_PADS(name, scl_i2c, scl_gpio, scl_gp, sda_i2c, sda_gpio, sda_gp) \
+ struct i2c_pads_info mx6q_##name = { \
+ .scl = { \
+ .i2c_mode = MX6Q_##scl_i2c, \
+ .gpio_mode = MX6Q_##scl_gpio, \
+ .gp = scl_gp, \
+ }, \
+ .sda = { \
+ .i2c_mode = MX6Q_##sda_i2c, \
+ .gpio_mode = MX6Q_##sda_gpio, \
+ .gp = sda_gp, \
+ } \
+ }; \
+ struct i2c_pads_info mx6s_##name = { \
+ .scl = { \
+ .i2c_mode = MX6DL_##scl_i2c, \
+ .gpio_mode = MX6DL_##scl_gpio, \
+ .gp = scl_gp, \
+ }, \
+ .sda = { \
+ .i2c_mode = MX6DL_##sda_i2c, \
+ .gpio_mode = MX6DL_##sda_gpio, \
+ .gp = sda_gp, \
+ } \
+ };
+
+
+#define I2C_PADS_INFO(name) \
+ (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) ? \
+ &mx6q_##name : &mx6s_##name
+#endif
+
+int setup_i2c(unsigned i2c_index, int speed, int slave_addr,
+ struct i2c_pads_info *p);
+void bus_i2c_init(int index, int speed, int slave_addr,
int (*idle_bus_fn)(void *p), void *p);
-int bus_i2c_read(void *base, uchar chip, uint addr, int alen, uchar *buf,
- int len);
-int bus_i2c_write(void *base, uchar chip, uint addr, int alen,
- const uchar *buf, int len);
+int force_idle_bus(void *priv);
+int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus);
#endif