bd_info: remove bi_barudrate member from struct bd_info

[karo-tx-uboot.git] / arch / m68k / lib / board.c

diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
index b676255dd0b5f1b9b4c5c3afb712ac780d9522b8..318ca01ea7f6df0ed39f04bb6152454b61d96d21 100644 (file)
--- a/arch/m68k/lib/board.c
+++ b/arch/m68k/lib/board.c
@@ -5,23 +5,7 @@
  * (C) Copyright 2000-2002
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -56,7 +40,7 @@
 #include <version.h>
 
 #if defined(CONFIG_HARD_I2C) || \
-    defined(CONFIG_SOFT_I2C)
+       defined(CONFIG_SYS_I2C)
 #include <i2c.h>
 #endif
 
@@ -80,6 +64,7 @@ extern ulong __init_end;
 extern ulong __bss_end;
 
 #if defined(CONFIG_WATCHDOG)
+# undef INIT_FUNC_WATCHDOG_INIT
 # define INIT_FUNC_WATCHDOG_INIT       watchdog_init,
 # define WATCHDOG_DISABLE              watchdog_disable
 
@@ -141,11 +126,15 @@ static int init_func_ram (void)
 
 /***********************************************************************/
 
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) ||        defined(CONFIG_SYS_I2C)
 static int init_func_i2c (void)
 {
        puts ("I2C:   ");
+#ifdef CONFIG_SYS_I2C
+       i2c_init_all();
+#else
        i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
        puts ("ready\n");
        return (0);
 }
@@ -177,7 +166,7 @@ init_fnc_t *init_sequence[] = {
        display_options,
        checkcpu,
        checkboard,
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
        init_func_i2c,
 #endif
 #if defined(CONFIG_HARD_SPI)
@@ -353,7 +342,6 @@ board_init_f (ulong bootflag)
        bd->bi_vcofreq = gd->arch.vco_clk;              /* vco Freq in Hz */
        bd->bi_flbfreq = gd->arch.flb_clk;              /* flexbus Freq in Hz */
 #endif
-       bd->bi_baudrate = gd->baudrate; /* Console Baudrate     */
 
 #ifdef CONFIG_SYS_EXTBDINFO
        strncpy (bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));
@@ -402,14 +390,14 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
        gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */
 
-       debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
-
        WATCHDOG_RESET ();
 
        gd->reloc_off =  dest_addr - CONFIG_SYS_MONITOR_BASE;
 
        serial_initialize();
 
+       debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+
        monitor_flash_len = (ulong)&__init_end - dest_addr;
 
 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
@@ -500,6 +488,11 @@ void board_init_r (gd_t *id, ulong dest_addr)
        spi_init_r ();
 #endif
 
+#if defined(CONFIG_SYS_I2C)
+       /* Adjust I2C subsystem pointers after relocation */
+       i2c_reloc_fixup();
+#endif
+
        /* relocate environment function pointers etc. */
        env_relocate ();
 
@@ -662,10 +655,3 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
        /* NOTREACHED - no way out of command loop except booting */
 }
-
-
-void hang(void)
-{
-       puts ("### ERROR ### Please RESET the board ###\n");
-       for (;;);
-}