Merge branch 'master' of git://www.denx.de/git/u-boot-imx

[karo-tx-uboot.git] / arch / powerpc / cpu / mpc8xx / cpu_init.c

diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c
index 49b354d1abeb0dde19043027023587cfe322ba27..90c7e61d8354afe5dd9ec0c8344383545f416243 100644 (file)
--- a/arch/powerpc/cpu/mpc8xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c
@@ -2,23 +2,7 @@
  * (C) Copyright 2000-2002
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -45,12 +29,10 @@ void cpm_load_patch (volatile immap_t * immr);
  */
 void cpu_init_f (volatile immap_t * immr)
 {
-#ifndef CONFIG_MBX
        volatile memctl8xx_t *memctl = &immr->im_memctl;
 # ifdef CONFIG_SYS_PLPRCR
        ulong mfmask;
 # endif
-#endif
        ulong reg;
 
        /* SYPCR - contains watchdog control (11-9) */
@@ -62,11 +44,7 @@ void cpu_init_f (volatile immap_t * immr)
 #endif /* CONFIG_WATCHDOG */
 
        /* SIUMCR - contains debug pin configuration (11-6) */
-#ifndef CONFIG_SVM_SC8xx
        immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
-#else
-       immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR;
-#endif
        /* initialize timebase status and control register (11-26) */
        /* unlock TBSCRK */
 
@@ -90,8 +68,6 @@ void cpu_init_f (volatile immap_t * immr)
 
        immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
 
-#ifndef CONFIG_MBX             /* MBX board does things different */
-
        /* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
         * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
         * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the current MF
@@ -158,9 +134,6 @@ void cpu_init_f (volatile immap_t * immr)
     defined(CONFIG_MHPC)       || \
     defined(CONFIG_R360MPI)    || \
     defined(CONFIG_RMU)                || \
-    defined(CONFIG_RPXCLASSIC) || \
-    defined(CONFIG_RPXLITE)    || \
-    defined(CONFIG_SPC1920)    || \
     defined(CONFIG_SPD823TS)
 
        memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
@@ -219,8 +192,6 @@ void cpu_init_f (volatile immap_t * immr)
        memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM;
 #endif
 
-#endif /* ! CONFIG_MBX */
-
        /*
         * Reset CPM
         */
@@ -229,24 +200,6 @@ void cpu_init_f (volatile immap_t * immr)
                __asm__ ("eieio");
        } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
 
-#ifdef CONFIG_MBX
-       /*
-        * on the MBX, things are a little bit different:
-        * - we need to read the VPD to get board information
-        * - the plprcr is set up dynamically
-        * - the memory controller is set up dynamically
-        */
-       mbx_init ();
-#endif /* CONFIG_MBX */
-
-#ifdef CONFIG_RPXCLASSIC
-       rpxclassic_init ();
-#endif
-
-#if defined(CONFIG_RPXLITE) && defined(CONFIG_ENV_IS_IN_NVRAM)
-       rpxlite_init ();
-#endif
-
 #ifdef CONFIG_SYS_RCCR                 /* must be done before cpm_load_patch() */
        /* write config value */
        immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR;