mpc8xx: remove netta, netta2, netphone board support

[karo-tx-uboot.git] / arch / powerpc / cpu / mpc8xx / fec.c

diff --git a/arch/powerpc/cpu/mpc8xx/fec.c b/arch/powerpc/cpu/mpc8xx/fec.c
index d4abeb1b2f1d1cd8596a63637e8f97284363eec3..ccb460ef96a8546661fd561b76fb4d8c0283c684 100644 (file)
--- a/arch/powerpc/cpu/mpc8xx/fec.c
+++ b/arch/powerpc/cpu/mpc8xx/fec.c
@@ -2,23 +2,7 @@
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -139,7 +123,7 @@ typedef volatile struct CommonBufferDescriptor {
 
 static RTXBD *rtx = NULL;
 
-static int fec_send(struct eth_device* dev, volatile void *packet, int length);
+static int fec_send(struct eth_device *dev, void *packet, int length);
 static int fec_recv(struct eth_device* dev);
 static int fec_init(struct eth_device* dev, bd_t * bd);
 static void fec_halt(struct eth_device* dev);
@@ -193,7 +177,7 @@ int fec_initialize(bd_t *bis)
        return 1;
 }
 
-static int fec_send(struct eth_device* dev, volatile void *packet, int length)
+static int fec_send(struct eth_device *dev, void *packet, int length)
 {
        int j, rc;
        struct ether_fcc_info_s *efis = dev->priv;
@@ -267,14 +251,14 @@ static int fec_recv (struct eth_device *dev)
                                rtx->rxbd[rxIdx].cbd_sc);
 #endif
                } else {
-                       volatile uchar *rx = NetRxPackets[rxIdx];
+                       uchar *rx = NetRxPackets[rxIdx];
 
                        length -= 4;
 
 #if defined(CONFIG_CMD_CDP)
                        if ((rx[0] & 1) != 0
                            && memcmp ((uchar *) rx, NetBcastAddr, 6) != 0
-                           && memcmp ((uchar *) rx, NetCDPAddr, 6) != 0)
+                           && !is_cdp_packet((uchar *)rx))
                                rx = NULL;
 #endif
                        /*
@@ -378,37 +362,21 @@ static void fec_pin_init(int fecidx)
 {
        bd_t           *bd = gd->bd;
        volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-       volatile fec_t *fecp;
-
-       /*
-        * only two FECs please
-        */
-       if ((unsigned int)fecidx >= 2)
-               hang();
-
-       if (fecidx == 0)
-               fecp = &immr->im_cpm.cp_fec1;
-       else
-               fecp = &immr->im_cpm.cp_fec2;
 
        /*
         * Set MII speed to 2.5 MHz or slightly below.
-        * * According to the MPC860T (Rev. D) Fast ethernet controller user
-        * * manual (6.2.14),
-        * * the MII management interface clock must be less than or equal
-        * * to 2.5 MHz.
-        * * This MDC frequency is equal to system clock / (2 * MII_SPEED).
-        * * Then MII_SPEED = system_clock / 2 * 2,5 MHz.
+        *
+        * According to the MPC860T (Rev. D) Fast ethernet controller user
+        * manual (6.2.14),
+        * the MII management interface clock must be less than or equal
+        * to 2.5 MHz.
+        * This MDC frequency is equal to system clock / (2 * MII_SPEED).
+        * Then MII_SPEED = system_clock / 2 * 2,5 MHz.
         *
         * All MII configuration is done via FEC1 registers:
         */
        immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
 
-#if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
-       /* our PHYs are the limit at 2.5 MHz */
-       fecp->fec_mii_speed <<= 1;
-#endif
-
 #if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII)
        /* use MDC for MII */
        immr->im_ioport.iop_pdpar |=  0x0080;
@@ -456,7 +424,7 @@ static void fec_pin_init(int fecidx)
 
 #endif /* !CONFIG_RMII */
 
-#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
+#elif !defined(CONFIG_ICU862)
                /*
                 * Configure all of port D for MII.
                 */
@@ -888,14 +856,14 @@ static int mii_discover_phy(struct eth_device *dev)
                        udelay(10000);  /* wait 10ms */
                }
                for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-                       phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+                       phytype = mii_send(mk_mii_read(phyno, MII_PHYSID2));
 #ifdef ET_DEBUG
                        printf("PHY type 0x%x pass %d type ", phytype, pass);
 #endif
                        if (phytype != 0xffff) {
                                phyaddr = phyno;
                                phytype |= mii_send(mk_mii_read(phyno,
-                                                               PHY_PHYIDR1)) << 16;
+                                                               MII_PHYSID1)) << 16;
 
 #ifdef ET_DEBUG
                                printf("PHY @ 0x%x pass %d type ",phyno,pass);
@@ -1010,11 +978,10 @@ int fec8xx_miiphy_read(const char *devname, unsigned char addr,
 int fec8xx_miiphy_write(const char *devname, unsigned char  addr,
                unsigned char  reg, unsigned short value)
 {
-       short rdreg;    /* register working value */
 #ifdef MII_DEBUG
        printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
 #endif
-       rdreg = mii_send(mk_mii_write(addr, reg, value));
+       (void)mii_send(mk_mii_write(addr, reg, value));
 
 #ifdef MII_DEBUG
        printf ("0x%04x\n", value);