/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
#include <asm/io.h>
#include <asm/fsl_serdes.h>
#include <spd.h>
#include <libfdt.h>
#include <spd_sdram.h>
#include <fdt_support.h>
+#include <fsl_mdio.h>
#include <tsec.h>
#include <netdev.h>
#include <sata.h>
#include "../common/sgmii_riser.h"
-phys_size_t fixed_sdram(void);
-
int board_early_init_f (void)
{
#ifdef CONFIG_MMC
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
setbits_be32(&gur->pmuxcr,
- (MPC85xx_PMUXCR_SD_DATA |
- MPC85xx_PMUXCR_SDHC_CD |
+ (MPC85xx_PMUXCR_SDHC_CD |
MPC85xx_PMUXCR_SDHC_WP));
+ /* The MPC8536DS board insert the SDHC_WP pin for erratum NMG_eSDHC118,
+ * however, this erratum only applies to MPC8536 Rev1.0.
+ * So set SDHC_WP to active-low when use MPC8536 Rev1.1 and greater.*/
+ if ((((SVR_MAJ(get_svr()) & 0x7) == 0x1) &&
+ (SVR_MIN(get_svr()) >= 0x1))
+ || (SVR_MAJ(get_svr() & 0x7) > 0x1))
+ setbits_be32(&gur->gencfgr, MPC85xx_GENCFGR_SDHC_WP_INV);
#endif
return 0;
}
u8 vboot;
u8 *pixis_base = (u8 *)PIXIS_BASE;
- puts("Board: MPC8536DS ");
-#ifdef CONFIG_PHYS_64BIT
- puts("(36-bit addrmap) ");
-#endif
-
- printf ("Sys ID: 0x%02x, "
+ printf("Board: MPC8536DS Sys ID: 0x%02x, "
"Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
in_8(pixis_base + PIXIS_PVER));
return 0;
}
-phys_size_t
-initdram(int board_type)
-{
- phys_size_t dram_size = 0;
-
- puts("Initializing....");
-
-#ifdef CONFIG_SPD_EEPROM
- dram_size = fsl_ddr_sdram();
-#else
- dram_size = fixed_sdram();
-#endif
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
- puts(" DDR: ");
- return dram_size;
-}
-
#if !defined(CONFIG_SPD_EEPROM)
/*
* Fixed sdram init -- doesn't use serial presence detect.
static struct pci_controller pci1_hose;
#endif
-#ifdef CONFIG_PCIE1
-static struct pci_controller pcie1_hose;
-#endif
-
-#ifdef CONFIG_PCIE2
-static struct pci_controller pcie2_hose;
-#endif
-
-#ifdef CONFIG_PCIE3
-static struct pci_controller pcie3_hose;
-#endif
-
#ifdef CONFIG_PCI
void pci_init_board(void)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- struct fsl_pci_info pci_info[4];
- u32 devdisr, pordevsr, io_sel, sdrs2_io_sel;
+ struct fsl_pci_info pci_info;
+ u32 devdisr, pordevsr;
u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
- int first_free_busno = 0;
- int num = 0;
+ int first_free_busno;
- int pcie_ep, pcie_configured;
+ first_free_busno = fsl_pcie_init_board(0);
+#ifdef CONFIG_PCI1
devdisr = in_be32(&gur->devdisr);
pordevsr = in_be32(&gur->pordevsr);
porpllsr = in_be32(&gur->porpllsr);
- io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- sdrs2_io_sel = (pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
-
- debug(" pci_init_board: devdisr=%x, sdrs2_io_sel=%x, io_sel=%x\n",
- devdisr, sdrs2_io_sel, io_sel);
-
- if (sdrs2_io_sel == 7)
- printf(" Serdes2 disalbed\n");
- else if (sdrs2_io_sel == 4) {
- printf(" eTSEC1 is in sgmii mode.\n");
- printf(" eTSEC3 is in sgmii mode.\n");
- } else if (sdrs2_io_sel == 6)
- printf(" eTSEC1 is in sgmii mode.\n");
- puts("\n");
-#ifdef CONFIG_PCIE3
- pcie_configured = is_serdes_configured(PCIE3);
-
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
- set_next_law(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_512M,
- LAW_TRGT_IF_PCIE_3);
- set_next_law(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K,
- LAW_TRGT_IF_PCIE_3);
- SET_STD_PCIE_INFO(pci_info[num], 3);
- pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
- printf (" PCIE3 connected to Slot3 as %s (base address %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
- first_free_busno = fsl_pci_init_port(&pci_info[num++],
- &pcie3_hose, first_free_busno);
- } else {
- printf (" PCIE3: disabled\n");
- }
-
- puts("\n");
-#else
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */
-#endif
-
-#ifdef CONFIG_PCIE1
- pcie_configured = is_serdes_configured(PCIE1);
-
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
- set_next_law(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_128M,
- LAW_TRGT_IF_PCIE_1);
- set_next_law(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K,
- LAW_TRGT_IF_PCIE_1);
- SET_STD_PCIE_INFO(pci_info[num], 1);
- pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf (" PCIE1 connected to Slot1 as %s (base address %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
- first_free_busno = fsl_pci_init_port(&pci_info[num++],
- &pcie1_hose, first_free_busno);
- } else {
- printf (" PCIE1: disabled\n");
- }
-
- puts("\n");
-#else
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
-#endif
-
-#ifdef CONFIG_PCIE2
- pcie_configured = is_serdes_configured(PCIE2);
-
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
- set_next_law(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_128M,
- LAW_TRGT_IF_PCIE_2);
- set_next_law(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K,
- LAW_TRGT_IF_PCIE_2);
- SET_STD_PCIE_INFO(pci_info[num], 2);
- pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
- printf (" PCIE2 connected to Slot 2 as %s (base address %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
- first_free_busno = fsl_pci_init_port(&pci_info[num++],
- &pcie2_hose, first_free_busno);
- } else {
- printf (" PCIE2: disabled\n");
- }
-
- puts("\n");
-#else
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
-#endif
-
-#ifdef CONFIG_PCI1
pci_speed = 66666000;
pci_32 = 1;
pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
- set_next_law(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_256M,
- LAW_TRGT_IF_PCI);
- set_next_law(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K,
- LAW_TRGT_IF_PCI);
- SET_STD_PCI_INFO(pci_info[num], 1);
- pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
- printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+ SET_STD_PCI_INFO(pci_info, 1);
+ set_next_law(pci_info.mem_phys,
+ law_size_bits(pci_info.mem_size), pci_info.law);
+ set_next_law(pci_info.io_phys,
+ law_size_bits(pci_info.io_size), pci_info.law);
+
+ pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
+ printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
(pci_speed == 33333000) ? "33" :
(pci_speed == 66666000) ? "66" : "unknown",
pci_clk_sel ? "sync" : "async",
pci_agent ? "agent" : "host",
pci_arb ? "arbiter" : "external-arbiter",
- pci_info[num].regs);
+ pci_info.regs);
- first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ first_free_busno = fsl_pci_init_port(&pci_info,
&pci1_hose, first_free_busno);
} else {
- printf (" PCI: disabled\n");
+ printf("PCI: disabled\n");
}
puts("\n");
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_TSEC_ENET
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[2];
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int num = 0;
- uint sdrs2_io_sel =
- (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
#ifdef CONFIG_TSEC1
SET_STD_TSEC_INFO(tsec_info[num], 1);
- if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6)) {
+ if (is_serdes_configured(SGMII_TSEC1)) {
+ puts("eTSEC1 is in sgmii mode.\n");
tsec_info[num].phyaddr = 0;
tsec_info[num].flags |= TSEC_SGMII;
}
#endif
#ifdef CONFIG_TSEC3
SET_STD_TSEC_INFO(tsec_info[num], 3);
- if (sdrs2_io_sel == 4) {
+ if (is_serdes_configured(SGMII_TSEC3)) {
+ puts("eTSEC3 is in sgmii mode.\n");
tsec_info[num].phyaddr = 1;
tsec_info[num].flags |= TSEC_SGMII;
}
}
#ifdef CONFIG_FSL_SGMII_RISER
- if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6))
+ if (is_serdes_configured(SGMII_TSEC1) ||
+ is_serdes_configured(SGMII_TSEC3)) {
fsl_sgmii_riser_init(tsec_info, num);
+ }
#endif
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
tsec_eth_init(bis, tsec_info, num);
#endif
return pci_eth_init(bis);
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_fdt_fixup(blob);
#endif
+
+#ifdef CONFIG_HAS_FSL_MPH_USB
+ fdt_fixup_dr_usb(blob, bd);
+#endif
+
}
#endif
projects / karo-tx-uboot.git / blobdiff