#include <linux/list.h>
#include <linux/fb.h>
#include <jffs2/load_kernel.h>
+#include <malloc.h>
#include "karo.h"
static void karo_set_fdtsize(void *fdt)
{
- char fdt_size[9];
size_t fdtsize = getenv_ulong("fdtsize", 16, 0);
if (fdtsize == fdt_totalsize(fdt)) {
}
debug("FDT size changed from %u to %u\n",
fdtsize, fdt_totalsize(fdt));
+ setenv_hex("fdtsize", fdt_totalsize(fdt));
+}
+
+static void *karo_fdt_load_dtb(void)
+{
+ int ret;
+ void *fdt = (void *)getenv_ulong("fdtaddr", 16, CONFIG_SYS_FDT_ADDR);
+
+ if (had_ctrlc()) {
+ printf("aborting DTB load\n");
+ return NULL;
+ }
+
+ /* clear FDT header in memory */
+ memset(fdt, 0, 4);
- snprintf(fdt_size, sizeof(fdt_size), "%08x", fdt_totalsize(fdt));
- setenv("fdtsize", fdt_size);
+ ret = karo_load_part("dtb", fdt, MAX_DTB_SIZE);
+ if (ret) {
+ printf("Failed to load dtb from flash: %d\n", ret);
+ return NULL;
+ }
+
+ if (fdt_check_header(fdt)) {
+ debug("No valid DTB in flash\n");
+ return NULL;
+ }
+ debug("Using DTB from flash\n");
+ karo_set_fdtsize(fdt);
+ return fdt;
}
void karo_fdt_move_fdt(void)
return;
}
+ setenv("fdtsize", 0);
+
if (!fdt_addr) {
fdt_addr = CONFIG_SYS_FDT_ADDR;
printf("fdtaddr is not set; using default: %08lx\n",
if (fdt == NULL) {
fdt = (void *)gd->fdt_blob;
if (fdt == NULL) {
- printf("Compiled in FDT not found\n");
- return;
+#ifdef CONFIG_OF_EMBED
+ printf("Compiled in FDT not found");
+#else
+ printf("No FDT found");
+#endif
+ printf("; creating empty DTB\n");
+ fdt = (void *)fdt_addr;
+ fdt_create_empty_tree(fdt, 256);
+ } else {
+ printf("No DTB in flash; using default DTB\n");
}
debug("Checking FDT header @ %p\n", fdt);
if (fdt_check_header(fdt)) {
printf("ERROR: No valid DTB found at %p\n", fdt);
return;
}
- printf("No DTB in flash; using default DTB\n");
debug("Moving FDT from %p..%p to %08lx..%08lx\n",
fdt, fdt + fdt_totalsize(fdt) - 1,
fdt_addr, fdt_addr + fdt_totalsize(fdt) - 1);
debug("Removing node '%s' from DT\n", node);
if (off < 0) {
- printf("Could not find node '%s': %d\n", node, off);
+ printf("Could not find node '%s': %s\n", node,
+ fdt_strerror(off));
} else {
ret = fdt_del_node(blob, off);
if (ret)
- printf("Failed to remove node '%s': %d\n",
- node, ret);
+ printf("Failed to remove node '%s': %s\n",
+ node, fdt_strerror(ret));
}
karo_set_fdtsize(blob);
}
debug("%sabling node '%s'\n", enable ? "En" : "Dis", node);
if (off < 0) {
- printf("Could not find node '%s': %d\n", node, off);
+ printf("Could not find node '%s': %s\n", node,
+ fdt_strerror(off));
return;
}
fdt_set_node_status(blob, off,
karo_set_fdtsize(blob);
}
-static const char *karo_touchpanels[] = {
- "ti,tsc2007",
- "edt,edt-ft5x06",
-#ifdef CONFIG_MX28
- "fsl,imx28-lradc",
-#endif
-};
-
static void fdt_disable_tp_node(void *blob, const char *name)
{
int offs = fdt_node_offset_by_compatible(blob, -1, name);
- if (offs < 0) {
- debug("node '%s' not found: %d\n", name, offs);
- return;
+ while (offs >= 0) {
+ debug("Disabling node '%s'\n", name);
+ fdt_set_node_status(blob, offs, FDT_STATUS_DISABLED, 0);
+ offs = fdt_node_offset_by_compatible(blob, offs, name);
}
-
- debug("Disabling node '%s'\n", name);
- fdt_set_node_status(blob, offs, FDT_STATUS_DISABLED, 0);
}
-void karo_fdt_fixup_touchpanel(void *blob)
+void karo_fdt_fixup_touchpanel(void *blob, const char *panels[],
+ size_t num_panels)
{
int i;
const char *model = getenv("touchpanel");
- for (i = 0; i < ARRAY_SIZE(karo_touchpanels); i++) {
- const char *tp = karo_touchpanels[i];
-
- if (model != NULL && strcmp(model, tp) == 0)
- continue;
+ for (i = 0; i < num_panels; i++) {
+ const char *tp = panels[i];
if (model != NULL) {
if (strcmp(model, tp) == 0)
continue;
- tp = strchr(tp, ',');
- if (tp != NULL && *tp != '\0' && strcmp(model, tp + 1) == 0)
+ while (tp != NULL) {
+ if (*tp != '\0' && strcmp(model, tp + 1) == 0)
+ break;
+ tp = strpbrk(tp + 1, ",-");
+ }
+ if (tp != NULL)
continue;
}
- fdt_disable_tp_node(blob, karo_touchpanels[i]);
+ fdt_disable_tp_node(blob, panels[i]);
}
karo_set_fdtsize(blob);
}
+static int karo_fdt_disable_node_phandle(void *blob, const char *parent,
+ const char *name)
+{
+ const uint32_t *ph;
+ int off;
+
+ off = fdt_path_offset(blob, parent);
+ if (off < 0) {
+ printf("Failed to find node '%s'\n", parent);
+ return off;
+ }
+
+ ph = fdt_getprop(blob, off, name, NULL);
+ if (ph == NULL) {
+ debug("Failed to find '%s' phandle in node '%s'\n", name,
+ fdt_get_name(blob, off, NULL));
+ return -FDT_ERR_NOTFOUND;
+ }
+
+ off = fdt_node_offset_by_phandle(blob, fdt32_to_cpu(*ph));
+ if (off <= 0) {
+ printf("Failed to find '%s' node via phandle %04x\n",
+ name, fdt32_to_cpu(*ph));
+ return -FDT_ERR_NOTFOUND;
+ }
+ return fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+}
+
void karo_fdt_fixup_usb_otg(void *blob, const char *node, const char *phy)
{
const char *otg_mode = getenv("otg_mode");
int off;
int ret;
- const uint32_t *ph;
int disable_otg = 0;
int disable_phy_pins = 1;
} else if (otg_mode && strcmp(otg_mode, "otg") == 0) {
debug("Setting dr_mode to 'host'\n");
ret = fdt_setprop_string(blob, off, "dr_mode", "otg");
+ disable_phy_pins = 0;
} else {
if (otg_mode && strcmp(otg_mode, "none") != 0)
printf("Invalid 'otg_mode' setting '%s'; disabling usbotg port\n",
if ((!disable_phy_pins && !disable_otg) || ret)
goto out;
+ ret = karo_fdt_disable_node_phandle(blob, node, "vbus-supply");
+ if (ret)
+ goto out;
+
if (disable_otg) {
+ debug("Disabling usbphy\n");
ret = fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
if (ret)
goto out;
- }
-
- ph = fdt_getprop(blob, off, phy, NULL);
- if (ph == NULL) {
- printf("Failed to find '%s' phandle in node '%s'\n", phy,
- fdt_get_name(blob, off, NULL));
- goto out;
- }
- off = fdt_node_offset_by_phandle(blob, fdt32_to_cpu(*ph));
- if (off <= 0) {
- printf("Failed to find '%s' node via phandle %04x\n",
- phy, fdt32_to_cpu(*ph));
- goto out;
+ ret = karo_fdt_disable_node_phandle(blob, node, phy);
+ } else if (disable_phy_pins) {
+ debug("Removing 'vbus-supply' from usbotg node\n");
+ fdt_delprop(blob, off, "vbus-supply");
}
- if (disable_otg) {
- debug("Disabling usbphy\n");
- ret = fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
- }
out:
if (ret)
- printf("Failed to update usbotg: %d\n", ret);
+ printf("Failed to update usbotg: %s\n", fdt_strerror(ret));
else
debug("node '%s' updated\n", node);
karo_set_fdtsize(blob);
}
+static inline int karo_fdt_flexcan_enabled(void *blob)
+{
+ static const char *can_ifs[] = {
+ "can0",
+ "can1",
+ };
+ size_t i;
+
+ for (i = 0; i < ARRAY_SIZE(can_ifs); i++) {
+ const char *status;
+ int off = fdt_path_offset(blob, can_ifs[i]);
+
+ if (off < 0) {
+ debug("node '%s' not found\n", can_ifs[i]);
+ continue;
+ }
+ status = fdt_getprop(blob, off, "status", NULL);
+ if (status && strcmp(status, "okay") == 0) {
+ debug("%s is enabled\n", can_ifs[i]);
+ return 1;
+ }
+ }
+ debug("can driver is disabled\n");
+ return 0;
+}
+
+static inline void karo_fdt_set_lcd_pins(void *blob, const char *name)
+{
+ int off = fdt_path_offset(blob, name);
+ u32 ph;
+ const struct fdt_property *pc;
+ int len;
+
+ if (off < 0)
+ return;
+
+ ph = fdt_create_phandle(blob, off);
+ if (!ph)
+ return;
+
+ off = fdt_path_offset(blob, "display");
+ if (off < 0)
+ return;
+
+ pc = fdt_get_property(blob, off, "pinctrl-0", &len);
+ if (!pc || len < sizeof(ph))
+ return;
+
+ memcpy((void *)pc->data, &ph, sizeof(ph));
+ fdt_setprop_cell(blob, off, "pinctrl-0", ph);
+}
+
+void karo_fdt_fixup_flexcan(void *blob, int xcvr_present)
+{
+ int ret;
+ const char *xcvr_status = "disabled";
+ const char *otg_mode = getenv("otg_mode");
+
+ if (xcvr_present) {
+ if (karo_fdt_flexcan_enabled(blob)) {
+ if (!is_lvds()) {
+ debug("Changing LCD to use 23bits only\n");
+ karo_fdt_set_lcd_pins(blob, "lcdif_23bit_pins_a");
+ xcvr_status = NULL;
+ }
+ } else if (!is_lvds()) {
+ debug("Changing LCD to use 24bits\n");
+ karo_fdt_set_lcd_pins(blob, "lcdif_24bit_pins_a");
+ }
+ } else {
+ int off = fdt_path_offset(blob, "can0");
+
+ if (off >= 0)
+ fdt_delprop(blob, off, "xceiver-supply");
+ off = fdt_path_offset(blob, "can1");
+ if (off >= 0)
+ fdt_delprop(blob, off, "xceiver-supply");
+ if (!is_lvds())
+ karo_fdt_set_lcd_pins(blob, "lcdif_24bit_pins_a");
+ }
+
+ if (otg_mode && strcmp(otg_mode, "host") == 0)
+ karo_fdt_enable_node(blob, "can1", 0);
+
+ if (xcvr_status) {
+ debug("Disabling CAN XCVR\n");
+ ret = fdt_find_and_setprop(blob, "reg_can_xcvr", "status",
+ xcvr_status, strlen(xcvr_status) + 1, 1);
+ if (ret)
+ printf("Failed to disable CAN transceiver switch: %s\n",
+ fdt_strerror(ret));
+ }
+}
+
void karo_fdt_del_prop(void *blob, const char *compat, phys_addr_t offs,
const char *prop)
{
prop = fdt_getprop(blob, off, "vsync-active", NULL);
if (prop)
fb_mode->sync |= *prop ? FB_SYNC_VERT_HIGH_ACT : 0;
-#if defined(CONFIG_MX51) || defined(CONFIG_MX53) || defined(CONFIG_MX6)
+
prop = fdt_getprop(blob, off, "de-active", NULL);
if (prop)
fb_mode->sync |= *prop ? 0 : FB_SYNC_OE_LOW_ACT;
prop = fdt_getprop(blob, off, "pixelclk-active", NULL);
if (prop)
fb_mode->sync |= *prop ? 0 : FB_SYNC_CLK_LAT_FALL;
-#endif
+
return 0;
}
int ret;
uint32_t ph;
- ret = fdt_increase_size(blob, 32);
+ ret = fdt_increase_size(blob, 64);
if (ret) {
- printf("Warning: Failed to increase FDT size: %d\n", ret);
+ printf("Warning: Failed to increase FDT size: %s\n",
+ fdt_strerror(ret));
}
debug("Creating phandle at offset %d\n", off);
ph = fdt_create_phandle(blob, off);
debug("parent offset=%06x\n", off);
ret = fdt_setprop_cell(blob, off, "native-mode", ph);
if (ret)
- printf("Failed to set property 'native-mode': %d\n", ret);
+ printf("Failed to set property 'native-mode': %s\n",
+ fdt_strerror(ret));
karo_set_fdtsize(blob);
return ret;
}
const char *subnode = "display-timings";
if (off < 0) {
- debug("Could not find node 'display' in FDT: %d\n", off);
+ debug("Could not find node 'display' in FDT: %s\n",
+ fdt_strerror(off));
return off;
}
off = fdt_subnode_offset(blob, off, subnode);
if (off < 0) {
- debug("Could not find node '%s' in FDT: %d\n", subnode, off);
+ debug("Could not find node '%s' in FDT: %s\n", subnode,
+ fdt_strerror(off));
}
return off;
}
if (d < 1)
return -EINVAL;
if (d > 2) {
- debug("Skipping node @ %04x %s depth %d\n", off, fdt_get_name(blob, off, NULL), d);
+ debug("Skipping node @ %04x %s depth %d\n", off,
+ fdt_get_name(blob, off, NULL), d);
continue;
}
- debug("parsing subnode @ %04x %s depth %d\n", off, fdt_get_name(blob, off, NULL), d);
+ debug("parsing subnode @ %04x %s depth %d\n", off,
+ fdt_get_name(blob, off, NULL), d);
n = fdt_getprop(blob, off, "panel-name", &len);
if (!n) {
int ret; \
ret = fdt_setprop_u32(blob, off, n, v); \
if (ret) { \
- printf("Failed to set property %s: %d\n", name, ret); \
+ printf("Failed to set property %s: %s\n", name, \
+ fdt_strerror(ret)); \
} \
ret; \
})
ret = fdt_increase_size(blob, 512);
if (ret) {
- printf("Failed to increase FDT size: %d\n", ret);
+ printf("Failed to increase FDT size: %s\n", fdt_strerror(ret));
return ret;
}
- printf("node '%s' offset=%d\n", "display", off);
ret = fdt_subnode_offset(blob, off, subnode);
if (ret < 0) {
- debug("Could not find node '%s' in FDT: %d\n", subnode, ret);
+ debug("Could not find node '%s' in FDT: %s\n", subnode,
+ fdt_strerror(ret));
ret = fdt_add_subnode(blob, off, subnode);
if (ret < 0) {
- printf("Failed to add %s subnode: %d\n", subnode, ret);
+ printf("Failed to add %s subnode: %s\n", subnode,
+ fdt_strerror(ret));
return ret;
}
}
- printf("node '%s' offset=%d\n", subnode, ret);
ret = fdt_add_subnode(blob, ret, name);
if (ret < 0) {
- printf("Failed to add %s subnode: %d\n", name, ret);
+ printf("Failed to add %s subnode: %s\n", name,
+ fdt_strerror(ret));
return ret;
}
off = ret;
fb_mode->sync & FB_SYNC_VERT_HIGH_ACT ? 1 : 0);
if (ret)
goto out;
-
-#if defined(CONFIG_MX51) || defined(CONFIG_MX53) || defined(CONFIG_MX6)
ret = SET_FB_PROP("de-active",
!(fb_mode->sync & FB_SYNC_OE_LOW_ACT));
if (ret)
goto out;
ret = SET_FB_PROP("pixelclk-active",
!(fb_mode->sync & FB_SYNC_CLK_LAT_FALL));
- if (ret)
- goto out;
-#else
- /* TODO: make these configurable */
- ret = SET_FB_PROP("de-active", 1);
- if (ret)
- goto out;
- ret = SET_FB_PROP("pixelclk-active", 1);
- if (ret)
- goto out;
-#endif
out:
karo_set_fdtsize(blob);
return ret;
return off;
if (name == NULL) {
- int parent = fdt_parent_offset(blob, off);
int ret;
- if (parent < 0) {
- printf("Failed to find parent of node '%s'\n",
- fdt_get_name(blob, off, NULL));
- return parent;
- }
- debug("parent offset=%06x\n", parent);
- ret = fdt_set_node_status(blob, parent, FDT_STATUS_DISABLED, 0);
+ debug("Disabling node '%s' at %03x\n",
+ fdt_get_name(blob, off, NULL), off);
+ ret = fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
return ret;
}
off = fdt_subnode_offset(blob, off, subnode);
if (off < 0) {
- debug("Could not find node '%s' in FDT: %d\n", subnode, off);
+ debug("Could not find node '%s' in FDT: %s\n", subnode,
+ fdt_strerror(off));
return off;
}
while (off > 0) {
if (d < 1)
return -EINVAL;
if (d > 2) {
- debug("Skipping node @ %04x %s depth %d\n", off, fdt_get_name(blob, off, NULL), d);
+ debug("Skipping node @ %04x %s depth %d\n", off,
+ fdt_get_name(blob, off, NULL), d);
continue;
}
- debug("parsing subnode @ %04x %s depth %d\n", off, fdt_get_name(blob, off, NULL), d);
+ debug("parsing subnode @ %04x %s depth %d\n", off,
+ fdt_get_name(blob, off, NULL), d);
n = fdt_getprop(blob, off, "panel-name", &len);
if (!n) {
return off;
}
-static int karo_load_part(const char *part, void *addr, size_t len)
+#ifdef CONFIG_SYS_LVDS_IF
+int karo_fdt_get_lcd_bus_width(const void *blob, int default_width)
{
- int ret;
- struct mtd_device *dev;
- struct part_info *part_info;
- u8 part_num;
- size_t actual;
-
- debug("Initializing mtd_parts\n");
- ret = mtdparts_init();
- if (ret)
- return ret;
+ int off = fdt_path_offset(blob, "display");
- debug("Trying to find NAND partition '%s'\n", part);
- ret = find_dev_and_part(part, &dev, &part_num,
- &part_info);
- if (ret) {
- printf("Failed to find flash partition '%s': %d\n",
- part, ret);
+ if (off >= 0) {
+ const uint32_t *prop;
- return ret;
- }
- debug("Found partition '%s': offset=%08x size=%08x\n",
- part, part_info->offset, part_info->size);
- if (part_info->size < len) {
- printf("Warning: partition '%s' smaller than requested size: %u; truncating data to %u byte\n",
- part, len, part_info->size);
- len = part_info->size;
- }
- debug("Reading NAND partition '%s' to %p\n", part, addr);
- ret = nand_read_skip_bad(&nand_info[0], part_info->offset, &len,
- &actual, len, addr);
- if (ret) {
- printf("Failed to load partition '%s' to %p\n", part, addr);
- return ret;
+ prop = fdt_getprop(blob, off, "fsl,data-width", NULL);
+ if (prop)
+ return fdt32_to_cpu(*prop);
}
- if (actual < len)
- printf("Read only %u of %u bytes due to bad blocks\n",
- actual, len);
+ return default_width;
+}
- debug("Read %u byte from partition '%s' @ offset %08x\n",
- len, part, part_info->offset);
- return 0;
+int karo_fdt_get_lvds_mapping(const void *blob, int default_mapping)
+{
+ int off = fdt_path_offset(blob, "display");
+
+ if (off >= 0) {
+ const char *prop;
+
+ prop = fdt_getprop(blob, off, "fsl,data-mapping", NULL);
+ if (prop)
+ return strcmp(prop, "jeida") == 0;
+ }
+ return default_mapping;
}
-void *karo_fdt_load_dtb(void)
+u8 karo_fdt_get_lvds_channels(const void *blob)
{
- int ret;
- void *fdt = (void *)getenv_ulong("fdtaddr", 16, CONFIG_SYS_FDT_ADDR);
+ static const char *lvds_chans[] = {
+ "lvds0",
+ "lvds1",
+ };
+ u8 lvds_chan_mask = 0;
+ int i;
- if (tstc()) {
- debug("aborting DTB load\n");
- return NULL;
+ for (i = 0; i < ARRAY_SIZE(lvds_chans); i++) {
+ const char *status;
+ int off = fdt_path_offset(blob, lvds_chans[i]);
+
+ if (off < 0)
+ continue;
+
+ status = fdt_getprop(blob, off, "status", NULL);
+ if (status && strcmp(status, "okay") == 0) {
+ debug("%s is enabled\n", lvds_chans[i]);
+ lvds_chan_mask |= 1 << i;
+ }
}
+ return lvds_chan_mask;
+}
+#endif
- /* clear FDT header in memory */
- memset(fdt, 0, 4);
+int karo_fdt_get_backlight_polarity(const void *blob)
+{
+#ifdef CONFIG_SYS_LVDS_IF
+ const char *backlight_node = "/backlight0";
+#else
+ const char *backlight_node = "/backlight";
+#endif
+ int off = fdt_path_offset(blob, "backlight"); /* first try alias */
+ const struct fdt_property *prop;
+ int len;
- ret = karo_load_part("dtb", fdt, MAX_DTB_SIZE);
- if (ret) {
- printf("Failed to load dtb from flash: %d\n", ret);
- return NULL;
+ if (off < 0) {
+ /*
+ * if no 'backlight' alias exists try finding '/backlight0'
+ * or '/backlight' depending on LVDS or not
+ */
+ off = fdt_path_offset(blob, backlight_node);
+ if (off < 0) {
+ printf("/backlight node not found in DT\n");
+ return off;
+ }
}
- if (fdt_check_header(fdt)) {
- debug("No valid DTB in flash\n");
- return NULL;
+ prop = fdt_get_property(blob, off, "pwms", &len);
+ if (!prop)
+ printf("'pwms' property not found\n");
+ else
+ debug("'pwms' property has len %d\n", len);
+
+ len /= sizeof(u32);
+ if (prop && len > 3) {
+ const u32 *data = (const u32 *)prop->data;
+ return fdt32_to_cpu(data[3]) == 0;
}
- debug("Using DTB from flash\n");
- karo_set_fdtsize(fdt);
- return fdt;
+ return 0;
}