ppc4xx: Replace 4xx lowercase SPR references

[karo-tx-uboot.git] / board / mpl / mip405 / mip405.c

diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index 84d3e1ed5c15db785719e0be3531437a920c580c..1738f54388520e48794fa63043aad0f632e117e9 100644 (file)
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -65,13 +65,14 @@
 #include <common.h>
 #include "mip405.h"
 #include <asm/processor.h>
-#include <405gp_i2c.h>
+#include <4xx_i2c.h>
 #include <miiphy.h>
 #include "../common/common_util.h"
+#include <stdio_dev.h>
 #include <i2c.h>
 #include <rtc.h>
-extern block_dev_desc_t * scsi_get_dev(int dev);
-extern block_dev_desc_t * ide_get_dev(int dev);
+
+DECLARE_GLOBAL_DATA_PTR;
 
 #undef SDRAM_DEBUG
 #define ENABLE_ECC /* for ecc boards */
@@ -89,12 +90,12 @@ extern ldiv_t ldiv (long int __numer, long int __denom);
 #endif
 
 
-#define PLD_PART_REG           PER_PLD_ADDR + 0
-#define PLD_VERS_REG           PER_PLD_ADDR + 1
-#define PLD_BOARD_CFG_REG      PER_PLD_ADDR + 2
-#define PLD_IRQ_REG            PER_PLD_ADDR + 3
-#define PLD_COM_MODE_REG       PER_PLD_ADDR + 4
-#define PLD_EXT_CONF_REG       PER_PLD_ADDR + 5
+#define PLD_PART_REG           PER_PLD_ADDR + 0
+#define PLD_VERS_REG           PER_PLD_ADDR + 1
+#define PLD_BOARD_CFG_REG      PER_PLD_ADDR + 2
+#define PLD_IRQ_REG            PER_PLD_ADDR + 3
+#define PLD_COM_MODE_REG       PER_PLD_ADDR + 4
+#define PLD_EXT_CONF_REG       PER_PLD_ADDR + 5
 
 #define MEGA_BYTE (1024*1024)
 
@@ -189,8 +190,6 @@ const sdram_t sdram_table[] = {
 void SDRAM_err (const char *s)
 {
 #ifndef SDRAM_DEBUG
-       DECLARE_GLOBAL_DATA_PTR;
-
        (void) get_clocks ();
        gd->baudrate = 9600;
        serial_init ();
@@ -241,8 +240,6 @@ void write_4hex (unsigned long val)
 
 int init_sdram (void)
 {
-       DECLARE_GLOBAL_DATA_PTR;
-
        unsigned long   tmp, baseaddr;
        unsigned short  i;
        unsigned char   trp_clocks,
@@ -254,7 +251,7 @@ int init_sdram (void)
        unsigned char   bc;
        unsigned long   sdram_tim, sdram_bank;
 
-       /*i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);*/
+       /*i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);*/
        (void) get_clocks ();
        gd->baudrate = 9600;
        serial_init ();
@@ -324,7 +321,7 @@ int init_sdram (void)
        serial_puts ("\n");
 #endif
        i = 0;
-       baseaddr = CFG_SDRAM_BASE;
+       baseaddr = CONFIG_SYS_SDRAM_BASE;
        while (sdram_table[i].sz != 0xff) {
                if (sdram_table[i].boardtype == bc)
                        break;
@@ -624,7 +621,7 @@ int checkboard (void)
 /* ------------------------------------------------------------------------- */
 static int test_dram (unsigned long ramsize);
 
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
 {
 
        unsigned long bank_reg[4], tmp, bank_size;
@@ -681,10 +678,9 @@ extern flash_info_t flash_info[];  /* info for FLASH chips */
 
 int misc_init_r (void)
 {
-       DECLARE_GLOBAL_DATA_PTR;
        /* adjust flash start and size as well as the offset */
        gd->bd->bi_flashstart=0-flash_info[0].size;
-       gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN;
+       gd->bd->bi_flashsize=flash_info[0].size-CONFIG_SYS_MONITOR_LEN;
        gd->bd->bi_flashoffset=0;
 
        /* check, if RTC is running */
@@ -692,7 +688,7 @@ int misc_init_r (void)
        start=get_timer(0);
        /* if MIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
        if (mfdcr(strap) & PSR_ROM_LOC)
-              mtspr(ccr0, (mfspr(ccr0) & ~0x80));
+              mtspr(SPRN_CCR0, (mfspr(SPRN_CCR0) & ~0x80));
 
        return (0);
 }
@@ -731,16 +727,16 @@ int last_stage_init (void)
        char *s;
        mem_test_reloc();
        /* write correct LED configuration */
-       if (miiphy_write (0x1, 0x14, 0x2402) != 0) {
+       if (miiphy_write("ppc_4xx_eth0", 0x1, 0x14, 0x2402) != 0) {
                printf ("Error writing to the PHY\n");
        }
        /* since LED/CFG2 is not connected on the -2,
         * write to correct capability information */
-       if (miiphy_write (0x1, 0x4, 0x01E1) != 0) {
+       if (miiphy_write("ppc_4xx_eth0", 0x1, 0x4, 0x01E1) != 0) {
                printf ("Error writing to the PHY\n");
        }
        print_mip405_rev ();
-       show_stdio_dev ();
+       stdio_print_current_devices ();
        check_env ();
        /* check if RTC time is valid */
        stop=get_timer(start);