Merge branch 'master' of http://git.denx.de/u-boot-samsung

[karo-tx-uboot.git] / board / palmtreo680 / README

diff --git a/board/palmtreo680/README b/board/palmtreo680/README
index 159f1f69dc0df47e51b5ab64ec4c46a70afa74f7..c8799c6ab1a25689a921d2b6e57aa05e05295df9 100644 (file)
--- a/board/palmtreo680/README
+++ b/board/palmtreo680/README
@@ -30,7 +30,6 @@ go wrong, but please tell me what happened exactly.  For that matter, I'd love
 to hear from you if you succeed.
 
 
-
 Details on the SPL
 ==================
 
@@ -51,7 +50,6 @@ IPL has already loaded to its correct SDRAM address, and then loads the
 remainder of u-boot and jumps to it.
 
 
-
 The docg4's "reliable mode"
 ===========================
 
@@ -79,7 +77,6 @@ module parameter), but not reading.  However, the u-boot docg4_spl driver does
 read in reliable mode, in the same fashion as the IPL.
 
 
-
 Details on the IPL and its data format
 ======================================
 
@@ -105,7 +102,6 @@ For the sake of simplicity and uniformity, the u-boot SPL mimics the operation
 of the IPL, and expects the image to be stored in the same format.
 
 
-
 Instructions on Programming u-boot to flash
 ===========================================
 
@@ -117,7 +113,6 @@ remainder of this document describes in detail how to program u-boot to the
 flash using Linux running on the Treo.
 
 
-
 Hardware Prerequisites
 ======================
 
@@ -136,7 +131,6 @@ A Linux desktop PC.
   to flash, you'll really want to use a Linux PC.
 
 
-
 Treo-side Software Prerequisites
 ================================
 
@@ -152,7 +146,6 @@ Linux bootloader for PalmOS:
   parameters passed to the kernel.
 
 
-
 Linux kernel:
 
   The kernel on the Treo 680 is still a little rough around the edges, and the
@@ -200,7 +193,6 @@ Linux kernel:
   and /dev/mtd2 for these partitions, respectively.  Ensure that your root file
   system at least has /dev/mtd1 if you are not running udev or mdev.
 
-
 Userspace Utilities:
 
   In addition to everything necessary to provide a useful userspace environment
@@ -221,19 +213,16 @@ Userspace Utilities:
   from the mtd-utils package.
 
 
-
 Desktop PC-side Software Prerequisites
 ======================================
 
 Terminal emulator application:
   minicom, kermit, etc.
 
-
 Linux kernel:
   Compiled with CONFIG_USB_SERIAL enabled.  Build this as a module.
 
 
-
 Recommended (Not directly related to u-boot)
 ============================================
 
@@ -275,7 +264,6 @@ configure the usb0 interface on the desktop.)  Use the nfs 'nolock' option when
 mounting to avoid the need to run a portmapper like rpcbind.
 
 
-
 Preliminaries
 =============
 
@@ -397,7 +385,6 @@ forget to copy the file to permanent storage, such as an mmc card.
 If all of the above went well, you can now program u-boot.
 
 
-
 Programming u-boot
 ==================
 
@@ -438,7 +425,6 @@ four blocks in /dev/mtd1; i.e., at offsets 0x00000, 0x40000, 0x80000, 0xc0000.
 Shutdown linux, remove and re-insert the battery, hold your breath...
 
 
-
 Enjoying u-boot
 ===============
 
@@ -478,7 +464,6 @@ support for reliable mode in u-boot's docg4 flash driver.  This should be
 corrected soon.
 
 
-
 Customizing
 ===========
 
@@ -511,7 +496,6 @@ in flash did not seem worth the cost of a 256k flash block.  But adding this
 should be straightforward.
 
 
-
 Restoring PalmOS
 ================
 
@@ -568,7 +552,6 @@ modprobe docg4 ignore_badblocks=1 || exit 1
 dd if=$1 bs=1 skip=$file_ofs count=540672 | nandwrite -o -n -s 0x80000 $2 - || exit 1
 modprobe -r docg4
 
-
 TODO
 ====
 
@@ -578,4 +561,3 @@ TODO
   - U-boot command that will write a new image to the bootloader partition in
     flash.
   - Linux FTD support.
-