* (C) Copyright 2001-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <linux/byteorder/swab.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/* Board support for 1 or 2 flash devices */
#define FLASH_PORT_WIDTH32
ulong size = 0;
extern void flash_preinit(void);
extern void flash_afterinit(ulong, ulong);
- ulong flashbase = CFG_FLASH_BASE;
+ ulong flashbase = CONFIG_SYS_FLASH_BASE;
flash_preinit();
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
switch (i) {
case 0:
memset(&flash_info[i], 0, sizeof(flash_info_t));
/* Protect monitor and environment sectors
*/
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
#ifndef CONFIG_BOOT_ROM
flash_protect ( FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
&flash_info[0] );
#endif
#endif
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
flash_protect ( FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+ CONFIG_ENV_ADDR,
+ CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
#endif
flash_afterinit(flash_info[0].start[0], flash_info[0].size);
/* In U-Boot we support only 32 MB (no bank-switching) */
info->sector_count = 256 / 2;
info->size = 0x04000000 / 2;
- info->start[0] = CFG_FLASH_BASE + 0x02000000;
+ info->start[0] = CONFIG_SYS_FLASH_BASE + 0x02000000;
break; /* => 32 MB */
case (FPW) INTEL_ID_28F128J3A:
info->flash_id += FLASH_28F128J3A;
info->sector_count = 128;
info->size = 0x02000000;
- info->start[0] = CFG_FLASH_BASE + 0x02000000;
+ info->start[0] = CONFIG_SYS_FLASH_BASE + 0x02000000;
break; /* => 32 MB */
case (FPW) INTEL_ID_28F640J3A:
info->flash_id += FLASH_28F640J3A;
info->sector_count = 64;
info->size = 0x01000000;
- info->start[0] = CFG_FLASH_BASE + 0x03000000;
+ info->start[0] = CONFIG_SYS_FLASH_BASE + 0x03000000;
break; /* => 16 MB */
case (FPW) INTEL_ID_28F320J3A:
info->flash_id += FLASH_28F320J3A;
info->sector_count = 32;
info->size = 0x800000;
- info->start[0] = CFG_FLASH_BASE + 0x03800000;
+ info->start[0] = CONFIG_SYS_FLASH_BASE + 0x03800000;
break; /* => 8 MB */
default:
break;
}
- if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
+ info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+ info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
}
addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
/*
* first, wait for the WSM to be finished. The rationale for
* waiting for the WSM to become idle for at most
- * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
+ * CONFIG_SYS_FLASH_ERASE_TOUT is as follows. The WSM can be busy
* because of: (1) erase, (2) program or (3) lock bit
* configuration. So we just wait for the longest timeout of
* the (1)-(3), i.e. the erase timeout.
start = get_timer (0);
while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
- if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
*addr = (FPW) INTEL_RESET; /* restore read mode */
printf("WSM busy too long, can't get prot status\n");
return 1;
int flash_erase (flash_info_t *info, int s_first, int s_last)
{
int flag, prot, sect;
- ulong type, start, last;
+ ulong type, start;
int rcode = 0;
if ((s_first < 0) || (s_first > s_last)) {
}
start = get_timer (0);
- last = start;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
*addr = (FPW) 0x00D000D0; /* erase confirm */
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = (FPW) 0x00B000B0; /* suspend erase */
*addr = (FPW) 0x00FF00FF; /* reset to read mode */
printf (" done\n");
}
}
+
+ if (flag)
+ enable_interrupts();
+
return rcode;
}
ulong status;
ulong start;
int flag;
+ int rcode = 0;
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
/* wait while polling the status register */
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (1);
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
+ rcode = 1;
+ break;
}
}
*addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (0);
+ if (flag)
+ enable_interrupts();
+
+ return rcode;
}
void inline spin_wheel (void)
start = get_timer(0);
while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
- if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
printf("Flash lock bit operation timed out\n");
rc = 1;
break;
*addr = INTEL_PROTECT; /* set */
while ((*addr & INTEL_FINISHED) != INTEL_FINISHED)
{
- if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT)
+ if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT)
{
printf("Flash lock bit operation timed out\n");
rc = 1;
projects / karo-tx-uboot.git / blobdiff